# Makefile.in generated by automake 1.9.2 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

#
# Written by Patrick Guio <patrick.guio@fys.uio.no>
#

srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
subdir = doc
DIST_COMMON = $(blitz_TEXINFOS) $(srcdir)/Makefile.am \
	$(srcdir)/Makefile.in $(srcdir)/stamp-vti \
	$(srcdir)/version.texi
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/ac_check_cxx_features.m4 \
	$(top_srcdir)/m4/ac_compiler_specific_header.m4 \
	$(top_srcdir)/m4/ac_compilers_64bits.m4 \
	$(top_srcdir)/m4/ac_cxx_bool.m4 \
	$(top_srcdir)/m4/ac_cxx_complex_math_in_namespace_std.m4 \
	$(top_srcdir)/m4/ac_cxx_const_cast.m4 \
	$(top_srcdir)/m4/ac_cxx_default_template_parameters.m4 \
	$(top_srcdir)/m4/ac_cxx_dynamic_cast.m4 \
	$(top_srcdir)/m4/ac_cxx_enable_debug.m4 \
	$(top_srcdir)/m4/ac_cxx_enable_optimize.m4 \
	$(top_srcdir)/m4/ac_cxx_enum_computations.m4 \
	$(top_srcdir)/m4/ac_cxx_enum_computations_with_cast.m4 \
	$(top_srcdir)/m4/ac_cxx_exceptions.m4 \
	$(top_srcdir)/m4/ac_cxx_explicit.m4 \
	$(top_srcdir)/m4/ac_cxx_explicit_template_function_qualification.m4 \
	$(top_srcdir)/m4/ac_cxx_flags_preset.m4 \
	$(top_srcdir)/m4/ac_cxx_full_specialization_syntax.m4 \
	$(top_srcdir)/m4/ac_cxx_function_nontype_parameters.m4 \
	$(top_srcdir)/m4/ac_cxx_general.m4 \
	$(top_srcdir)/m4/ac_cxx_have_climits.m4 \
	$(top_srcdir)/m4/ac_cxx_have_complex.m4 \
	$(top_srcdir)/m4/ac_cxx_have_complex_fcns.m4 \
	$(top_srcdir)/m4/ac_cxx_have_complex_math1.m4 \
	$(top_srcdir)/m4/ac_cxx_have_complex_math2.m4 \
	$(top_srcdir)/m4/ac_cxx_have_ieee_math.m4 \
	$(top_srcdir)/m4/ac_cxx_have_numeric_limits.m4 \
	$(top_srcdir)/m4/ac_cxx_have_rusage.m4 \
	$(top_srcdir)/m4/ac_cxx_have_std.m4 \
	$(top_srcdir)/m4/ac_cxx_have_stl.m4 \
	$(top_srcdir)/m4/ac_cxx_have_system_v_math.m4 \
	$(top_srcdir)/m4/ac_cxx_have_valarray.m4 \
	$(top_srcdir)/m4/ac_cxx_isnan_in_namespace_std.m4 \
	$(top_srcdir)/m4/ac_cxx_keywords.m4 \
	$(top_srcdir)/m4/ac_cxx_math_fn_in_namespace_std.m4 \
	$(top_srcdir)/m4/ac_cxx_member_constants.m4 \
	$(top_srcdir)/m4/ac_cxx_member_templates.m4 \
	$(top_srcdir)/m4/ac_cxx_member_templates_outside_class.m4 \
	$(top_srcdir)/m4/ac_cxx_mutable.m4 \
	$(top_srcdir)/m4/ac_cxx_namespaces.m4 \
	$(top_srcdir)/m4/ac_cxx_nceg_restrict.m4 \
	$(top_srcdir)/m4/ac_cxx_nceg_restrict_egcs.m4 \
	$(top_srcdir)/m4/ac_cxx_old_for_scoping.m4 \
	$(top_srcdir)/m4/ac_cxx_partial_ordering.m4 \
	$(top_srcdir)/m4/ac_cxx_partial_specialization.m4 \
	$(top_srcdir)/m4/ac_cxx_reinterpret_cast.m4 \
	$(top_srcdir)/m4/ac_cxx_rtti.m4 \
	$(top_srcdir)/m4/ac_cxx_standard_library.m4 \
	$(top_srcdir)/m4/ac_cxx_static_cast.m4 \
	$(top_srcdir)/m4/ac_cxx_template_keyword_qualifier.m4 \
	$(top_srcdir)/m4/ac_cxx_template_qualified_base_class.m4 \
	$(top_srcdir)/m4/ac_cxx_template_qualified_return_type.m4 \
	$(top_srcdir)/m4/ac_cxx_template_scoped_argument_matching.m4 \
	$(top_srcdir)/m4/ac_cxx_templates.m4 \
	$(top_srcdir)/m4/ac_cxx_templates_as_template_arguments.m4 \
	$(top_srcdir)/m4/ac_cxx_templates_features.m4 \
	$(top_srcdir)/m4/ac_cxx_type_casts.m4 \
	$(top_srcdir)/m4/ac_cxx_type_promotion.m4 \
	$(top_srcdir)/m4/ac_cxx_typename.m4 \
	$(top_srcdir)/m4/ac_cxx_use_numtrait.m4 \
	$(top_srcdir)/m4/ac_env.m4 \
	$(top_srcdir)/m4/ac_fortran_flags_preset.m4 \
	$(top_srcdir)/m4/ac_info.m4 $(top_srcdir)/m4/ac_lib_blas.m4 \
	$(top_srcdir)/m4/ac_prog_doxygen.m4 \
	$(top_srcdir)/m4/ax_create_pkgconfig_info.m4 \
	$(top_srcdir)/m4/ax_dirname.m4 \
	$(top_srcdir)/m4/ax_prefix_config_h.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/blitz/config.h
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
INFO_DEPS = $(srcdir)/blitz.info
TEXINFO_TEX = $(top_srcdir)/config/texinfo.tex
am__TEXINFO_TEX_DIR = $(top_srcdir)/config
DVIS = blitz.dvi
PDFS = blitz.pdf
PSS = blitz.ps
HTMLS = blitz.html
TEXINFOS = blitz.texi
TEXI2DVI = texi2dvi
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-exec-recursive install-info-recursive \
	install-recursive installcheck-recursive installdirs-recursive \
	pdf-recursive ps-recursive uninstall-info-recursive \
	uninstall-recursive
am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(docdir)"
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
docDATA_INSTALL = $(INSTALL_DATA)
DATA = $(doc_DATA)
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
AR_FLAGS = @AR_FLAGS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BLASLIB = @BLASLIB@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
COMPILER_SPECIFIC_HEADER = @COMPILER_SPECIFIC_HEADER@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFCFLAG = @CXXFCFLAG@
CXXFFLAGS = @CXXFFLAGS@
CXXFLAGS = @CXXFLAGS@
CXX_DEBUG_FLAGS = @CXX_DEBUG_FLAGS@
CXX_LIBS = @CXX_LIBS@
CXX_OPTIMIZE_FLAGS = @CXX_OPTIMIZE_FLAGS@
CXX_PROFIL_FLAGS = @CXX_PROFIL_FLAGS@
CYGPATH_W = @CYGPATH_W@
DATE = @DATE@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DOT = @DOT@
DOXYGEN = @DOXYGEN@
DOXYGEN_DOC_FALSE = @DOXYGEN_DOC_FALSE@
DOXYGEN_DOC_TRUE = @DOXYGEN_DOC_TRUE@
ECHO = @ECHO@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
F77 = @F77@
F77_OPTIMIZE_FLAGS = @F77_OPTIMIZE_FLAGS@
F90_COMPILER_FALSE = @F90_COMPILER_FALSE@
F90_COMPILER_TRUE = @F90_COMPILER_TRUE@
FC = @FC@
FCFLAGS = @FCFLAGS@
FCFLAGS_f90 = @FCFLAGS_f90@
FCLIBS = @FCLIBS@
FC_OPTIMIZE_FLAGS = @FC_OPTIMIZE_FLAGS@
FFLAGS = @FFLAGS@
FLIBS = @FLIBS@
FORTRAN_ENABLED_FALSE = @FORTRAN_ENABLED_FALSE@
FORTRAN_ENABLED_TRUE = @FORTRAN_ENABLED_TRUE@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
MAKEINFO = @MAKEINFO@
OBJEXT = @OBJEXT@
OS = @OS@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_F77 = @ac_ct_F77@
ac_ct_FC = @ac_ct_FC@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
datadir = @datadir@
enable_dot = @enable_dot@
enable_html_docs = @enable_html_docs@
enable_latex_docs = @enable_latex_docs@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pkgconfig_libdir = @pkgconfig_libdir@
pkgconfig_libfile = @pkgconfig_libfile@
prefix = @prefix@
program_transform_name = @program_transform_name@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
SUBDIRS = examples stencils doxygen

# install these files
docdir = $(datadir)/doc/$(PACKAGE)-$(VERSION)
doc_DATA = blitz.ps blitz.pdf blitz.html \
	blitz_abt.html blitz_fot.html blitz_ovr.html blitz_toc.html \
	blitz_1.html blitz_2.html blitz_3.html blitz_4.html blitz_5.html \
	blitz_6.html blitz_7.html blitz_8.html blitz_9.html blitz_10.html \
	blitz_11.html blitz_12.html blitz_13.html blitz_14.html blitz_15.html \
	blitz_16.html indirect.gif slice.gif strideslice.gif sinsoid.gif \
	tensor1.gif blitz.gif blitztiny.jpg

HERE = $(CURDIR)
DVIPS = export TEXPICTS=$(srcdir); dvips
AM_MAKEINFOFLAGS = --no-split -I$(HERE)
TEXI2HTML = texi2html
TEXI2HTML_FLAGS = --subdir=. -split=chapter
STENCILS = stencils/backward11.texi stencils/backward12.texi \
stencils/backward21.texi stencils/backward22.texi stencils/backward31.texi \
stencils/backward32.texi stencils/backward41.texi stencils/backward42.texi \
stencils/central12.texi stencils/central14.texi stencils/central22.texi \
stencils/central24.texi stencils/central32.texi stencils/central34.texi \
stencils/central42.texi stencils/central44.texi stencils/forward11.texi \
stencils/forward12.texi stencils/forward21.texi stencils/forward22.texi \
stencils/forward31.texi stencils/forward32.texi stencils/forward41.texi \
stencils/forward42.texi stencils/Laplacian2D4.texi stencils/Laplacian2D.texi

EXAMPLES = examples/cast.texi examples/debug.texi examples/dump.texi \
examples/fixed-point.texi examples/fixed.texi examples/io.texi \
examples/outer.texi examples/output.texi examples/range.texi \
examples/simple.texi examples/slicing.texi examples/storage.texi \
examples/strideslice.texi examples/xor.texi

OUTPUT = examples/cast.out examples/debug.out examples/dump.out \
examples/fixed.out examples/io.out examples/outer.out examples/output.out \
examples/range.out examples/simple.out examples/slicing.out \
examples/storage.out examples/strideslice.out examples/xor.out

info_TEXINFOS = blitz.texi
blitz_TEXINFOS = about.texi arrays-ctors.texi arrays-debug.texi \
arrays-expr.texi arrays-globals.texi arrays-indirect.texi arrays-intro.texi \
arrays-io.texi arrays-members.texi arrays-multi.texi arrays-slicing.texi \
arrays-stencils.texi arrays-storage.texi arrays-types.texi \
arrays-usertype.texi compiling.texi constants.texi download.texi \
faq.texi help.texi install.texi legal.texi numinquire.texi parallel.texi \
platforms.texi random.texi tau.texi tinymatrix.texi tinyvector.texi \
tuning.texi copyright.texi $(STENCILS) $(EXAMPLES) $(OUTPUT)

EXTRA_DIST = blitz.info blitz.dvi blitz.ps blitz.pdf blitz.gif blitztiny.jpg \
	indirect.eps indirect.fig indirect.pdf indirect.gif indirect.txt \
	sinsoid.eps sinsoid.pdf sinsoid.gif sinsoid.txt \
	slice.eps slice.fig slice.pdf slice.gif slice.txt \
	strideslice.eps strideslice.fig strideslice.pdf strideslice.gif strideslice.txt \
	tensor1.eps tensor1.fig tensor1.pdf tensor1.gif tensor1.txt \
	blitz.html blitz_abt.html blitz_fot.html blitz_ovr.html blitz_toc.html \
	blitz_1.html blitz_2.html blitz_3.html blitz_4.html blitz_5.html \
	blitz_6.html blitz_7.html blitz_8.html blitz_9.html blitz_10.html \
	blitz_11.html blitz_12.html blitz_13.html blitz_14.html \
	blitz_15.html blitz_16.html


# Files from texi2dvi that should be removed, but which Automake does
# not know.
CLEANFILES = blitz.tmp
all: all-recursive

.SUFFIXES:
.SUFFIXES: .dvi .html .info .pdf .ps .texi
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  doc/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --foreign  doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool

.texi.info:
	restore=: && backupdir="$(am__leading_dot)am$$$$" && \
	am__cwd=`pwd` && cd $(srcdir) && \
	rm -rf $$backupdir && mkdir $$backupdir && \
	for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
	  if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
	done; \
	cd "$$am__cwd"; \
	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $@ $<; \
	then \
	  rc=0; \
	  cd $(srcdir); \
	else \
	  rc=$$?; \
	  cd $(srcdir) && \
	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
	fi; \
	rm -rf $$backupdir; exit $$rc

.texi.dvi:
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2DVI) $<

.texi.pdf:
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2PDF) $<

.texi.html:
	rm -rf $(@:.html=.htp)
	if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $(@:.html=.htp) $<; \
	then \
	  rm -rf $@; \
	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
	    mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
	else \
	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
	    rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
	  exit 1; \
	fi
$(srcdir)/blitz.info: blitz.texi $(srcdir)/version.texi $(blitz_TEXINFOS)
blitz.dvi: blitz.texi $(srcdir)/version.texi $(blitz_TEXINFOS)
blitz.pdf: blitz.texi $(srcdir)/version.texi $(blitz_TEXINFOS)
$(srcdir)/version.texi: @MAINTAINER_MODE_TRUE@ $(srcdir)/stamp-vti
$(srcdir)/stamp-vti: blitz.texi $(top_srcdir)/configure
	@(dir=.; test -f ./blitz.texi || dir=$(srcdir); \
	set `$(SHELL) $(top_srcdir)/config/mdate-sh $$dir/blitz.texi`; \
	echo "@set UPDATED $$1 $$2 $$3"; \
	echo "@set UPDATED-MONTH $$2 $$3"; \
	echo "@set EDITION $(VERSION)"; \
	echo "@set VERSION $(VERSION)") > vti.tmp
	@cmp -s vti.tmp $(srcdir)/version.texi \
	  || (echo "Updating $(srcdir)/version.texi"; \
	      cp vti.tmp $(srcdir)/version.texi)
	-@rm -f vti.tmp
	@cp $(srcdir)/version.texi $@

mostlyclean-vti:
	-rm -f vti.tmp

maintainer-clean-vti:
@MAINTAINER_MODE_TRUE@	-rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
.dvi.ps:
	$(DVIPS) -o $@ $<

uninstall-info-am:
	$(PRE_UNINSTALL)
	@if (install-info --version && \
	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
	    install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
	  done; \
	else :; fi
	@$(NORMAL_UNINSTALL)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  relfile=`echo "$$file" | sed 's|^.*/||'`; \
	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
	  (if cd "$(DESTDIR)$(infodir)"; then \
	     echo " rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9])"; \
	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
	   else :; fi); \
	done

dist-info: $(INFO_DEPS)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; \
	for base in $$list; do \
	  case $$base in \
	    $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
	  for file in $$d/$$base*; do \
	    relfile=`expr "$$file" : "$$d/\(.*\)"`; \
	    test -f $(distdir)/$$relfile || \
	      cp -p $$file $(distdir)/$$relfile; \
	  done; \
	done

mostlyclean-aminfo:
	-rm -rf blitz.aux blitz.cp blitz.cps blitz.fn blitz.fns blitz.ky blitz.kys \
	  blitz.log blitz.pg blitz.pgs blitz.tmp blitz.toc blitz.tp \
	  blitz.tps blitz.vr blitz.vrs blitz.dvi blitz.pdf blitz.ps \
	  blitz.html

maintainer-clean-aminfo:
	@list='$(INFO_DEPS)'; for i in $$list; do \
	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
	done
install-docDATA: $(doc_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(docdir)" || $(mkdir_p) "$(DESTDIR)$(docdir)"
	@list='$(doc_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docdir)/$$f'"; \
	  $(docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docdir)/$$f"; \
	done

uninstall-docDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(doc_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(docdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(docdir)/$$f"; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@set fnord $$MAKEFLAGS; amf=$$2; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@set fnord $$MAKEFLAGS; amf=$$2; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	$(mkdir_p) $(distdir)/examples $(distdir)/stencils
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkdir_p) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(mkdir_p) "$(distdir)/$$subdir" \
	    || exit 1; \
	    distdir=`$(am__cd) $(distdir) && pwd`; \
	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$top_distdir" \
	        distdir="$$distdir/$$subdir" \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-info
check-am: all-am
check: check-recursive
all-am: Makefile $(INFO_DEPS) $(DATA)
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(docdir)"; do \
	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libtool clean-local mostlyclean-am

distclean: distclean-recursive
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool \
	distclean-tags

dvi: dvi-recursive

dvi-am: $(DVIS)

html-am: $(HTMLS)

info: info-recursive

info-am: $(INFO_DEPS)

install-data-am: install-docDATA install-info-am

install-exec-am:

install-info: install-info-recursive

install-info-am: $(INFO_DEPS)
	@$(NORMAL_INSTALL)
	test -z "$(infodir)" || $(mkdir_p) "$(DESTDIR)$(infodir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
                       $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
	    if test -f $$ifile; then \
	      relfile=`echo "$$ifile" | sed 's|^.*/||'`; \
	      echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \
	      $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \
	    else : ; fi; \
	  done; \
	done
	@$(POST_INSTALL)
	@if (install-info --version && \
	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
	  done; \
	else : ; fi
install-man:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
	maintainer-clean-generic maintainer-clean-vti

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
	mostlyclean-libtool mostlyclean-vti

pdf: pdf-recursive

pdf-am: $(PDFS)

ps: ps-recursive

ps-am: $(PSS)

uninstall-am: uninstall-docDATA uninstall-info-am

uninstall-info: uninstall-info-recursive

.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \
	clean clean-generic clean-libtool clean-local clean-recursive \
	ctags ctags-recursive dist-info distclean distclean-generic \
	distclean-libtool distclean-recursive distclean-tags distdir \
	dvi dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-docDATA install-exec \
	install-exec-am install-info install-info-am install-man \
	install-strip installcheck installcheck-am installdirs \
	installdirs-am maintainer-clean maintainer-clean-aminfo \
	maintainer-clean-generic maintainer-clean-recursive \
	maintainer-clean-vti mostlyclean mostlyclean-aminfo \
	mostlyclean-generic mostlyclean-libtool mostlyclean-recursive \
	mostlyclean-vti pdf pdf-am ps ps-am tags tags-recursive \
	uninstall uninstall-am uninstall-docDATA uninstall-info-am


html: blitz.html

blitz.html: $(info_TEXINFOS) $(blitz_TEXINFOS)
	$(TEXI2HTML) $(TEXI2HTML_FLAGS) $(srcdir)/blitz.texi

stencils/%.texi:
	(cd stencils; $(MAKE) $(AM_MAKEFLAGS) stencils)

examples/%.texi:
	(cd examples; $(MAKE) $(AM_MAKEFLAGS) -i texi)

examples/%.out:
	(cd examples; $(MAKE) $(AM_MAKEFLAGS) -i out)

.PHONY: html

clean-local:

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
