#!/bin/sh
# IPsec startup and shutdown script
# Copyright (C) 1998, 1999, 2001  Henry Spencer.
# Copyright (C) 2002              Michael Richardson <mcr@freeswan.org>
# 
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the
# Free Software Foundation; either version 2 of the License, or (at your
# option) any later version.  See <http://www.fsf.org/copyleft/gpl.txt>.
# 
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
# for more details.
#
# RCSID $Id: setup.in,v 1.118 2003/02/27 16:51:55 dhr Exp $
#
# ipsec         init.d script for starting and stopping
#               the IPsec security subsystem (KLIPS and Pluto).
#
# This script becomes /etc/rc.d/init.d/ipsec (or possibly /etc/init.d/ipsec)
# and is also accessible as "ipsec setup" (the preferred route for human
# invocation).
#
# The startup and shutdown times are a difficult compromise (in particular,
# it is almost impossible to reconcile them with the insanely early/late
# times of NFS filesystem startup/shutdown).  Startup is after startup of
# syslog and pcmcia support; shutdown is just before shutdown of syslog.
#
# chkconfig: 2345 47 68
# description: IPsec provides encrypted and authenticated communications; \
# KLIPS is the kernel half of it, Pluto is the user-level management daemon.

me='ipsec setup'		# for messages


# where the private directory and the config files are
IPSEC_EXECDIR="${IPSEC_EXECDIR-@IPSEC_EXECDIR@}"
IPSEC_LIBDIR="${IPSEC_LIBDIR-@IPSEC_LIBDIR@}"
IPSEC_SBINDIR="${IPSEC_SBINDIR-@IPSEC_SBINDIR@}"
IPSEC_CONFS="${IPSEC_CONFS-@IPSEC_CONFS@}"

if test " $IPSEC_DIR" = " "	# if we were not called by the ipsec command
then
    # we must establish a suitable PATH ourselves
    PATH="${IPSEC_SBINDIR}":/sbin:/usr/sbin:/usr/local/bin:/bin:/usr/bin
    export PATH

    IPSEC_DIR="$IPSEC_LIBDIR"
    export IPSEC_DIR IPSEC_CONFS IPSEC_LIBDIR IPSEC_EXECDIR
fi

# Check that the ipsec command is available.
found=
for dir in `echo $PATH | tr ':' ' '`
do
	if test -f $dir/ipsec -a -x $dir/ipsec
	then
		found=yes
		break			# NOTE BREAK OUT
	fi
done
if ! test "$found"
then
	echo "cannot find ipsec command -- \`$1' aborted" |
		logger -s -p daemon.error -t ipsec_setup
	exit 1
fi

# accept a few flags

export IPSEC_setupflags
IPSEC_setupflags=""

config=""

for dummy
do
	case "$1" in
	--showonly|--show)  IPSEC_setupflags="$1" ;;
	--config)  config="--config $2" ; shift	;;
	*) break ;;
	esac
	shift
done


# Pick up IPsec configuration (until we have done this, successfully, we
# do not know where errors should go, hence the explicit "daemon.error"s.)
# Note the "--export", which exports the variables created.
eval `ipsec _confread $config --optional --varprefix IPSEC --export --type config setup`
if test " $IPSEC_confreadstatus" != " "
then
	echo "$IPSEC_confreadstatus -- \`$1' aborted" |
		logger -s -p daemon.error -t ipsec_setup
	exit 1
fi

IPSEC_confreadsection=${IPSEC_confreadsection:-setup}
export IPSEC_confreadsection

IPSECsyslog=${IPSECsyslog-daemon.error}
export IPSECsyslog

# misc setup
umask 022


# do it
case "$1" in
  start|--start|stop|--stop|_autostop|_autostart)
	if test " `id -u`" != " 0"
	then
		echo "permission denied (must be superuser)" |
			logger -s -p $IPSECsyslog -t ipsec_setup 2>&1
		exit 1
	fi
	tmp=/var/run/ipsec_setup.st
	(
		ipsec _realsetup $1
		echo "$?" >$tmp
	) 2>&1 | logger -s -p $IPSECsyslog -t ipsec_setup 2>&1
	st=$?
	if test -f $tmp
	then
		st=`cat $tmp`
		rm -f $tmp
	fi
	exit $st
	;;

  restart|--restart|force-reload)
	$0 $IPSEC_setupflags stop
	$0 $IPSEC_setupflags start
	;;

  _autorestart)			# for internal use only
	$0 $IPSEC_setupflags _autostop
	$0 $IPSEC_setupflags _autostart
	;;

  status|--status)
	ipsec _realsetup $1
	exit
	;;

  --version)
	echo "$me $IPSEC_VERSION"
	exit 0
	;;

  --help)
	echo "Usage: $me {--start|--stop|--restart|--status}"
	exit 0
	;;

  *)
	echo "Usage: $me {--start|--stop|--restart|--status}" >&2
	exit 2
esac

exit 0
