################################################################################################
## Configuration template for GXP2000, firmware version 1.1.0.13
################################################################################################

#-----------------------------------------------------------------------------
# Network & security Settings
#-----------------------------------------------------------------------------

# Admin password for web interface
P2 = admin

# End User Password
P196 = 123

# DHCP support. 0 - yes, 1 - no
P8 = 0

# PPPoE support. PPPoE user ID
P82 =

# PPPoE password
P83 =

# Host name (option 12)
P146 =

# Domain name (option 15)
P147 = 

# Vendor Class Id (opion 60)
P148 = 

# IP Address. Ignore if DHCP or PPPoE is used
P9 = 
P10 = 
P11 = 
P12 = 

# Subnet mask. Ignore if DHCP or PPPoE is used
P13 = 255
P14 = 255
P15 = 255
P16 = 0

# Router. Ignore if DHCP or PPPoE is used
P17 = 
P18 = 
P19 = 
P20 = 

# Use this DNS server.  (if specified).
P92 = 
P93 = 
P94 = 
P95 = 

# DNS 1. Ignore if DHCP or PPPoE is used
P21 = 
P22 = 
P23 = 
P24 = 

# DNS 2. Ignore if DHCP or PPPoE is used
P25 = 0
P26 = 0
P27 = 0
P28 = 0

# Use NAT IP.  This will enable our SIP client to use this IP in the SIP message. Example 64.3.153.50.
P101 =

# Use Random Port. 0 - no, 1 - yes
P78 = 0

# Local RTP port (1024-65535, default 5004)
P39 = 5004 

#-----------------------------------------------------------------------------
# Syslog Server
#-----------------------------------------------------------------------------

# Syslog Server (name of the server, max length is 64 charactors)
P207 =

# Syslog Level (Default setting is NONE)
# 0 - NONE, 1 - DEBUG, 2 - INFO, 3 - WARNING, 4 - ERROR
P208 =

#-------------------------------------------------------------
# Firmware Upgrade & Configuration
#-------------------------------------------------------------

# Firmware Upgrade. 0 - TFTP Upgrade,  1 - HTTP Upgrade.
P212 = 0

# TFTP Server (for remote software upgrade and configuration)
# For firmware version 1.0.5.22 and above)
P213 =
P214 = 
P215 = 
P216 = 

# Firmware Path
P192 =

# Config server Path
P237 =

# Firmware file prefix
P232 = 

# Firmware file postfix
P233 = 

# Config file prefix
P234 = 

# Config file postfix
P235 = 

# DHCP option 66 overrides tftp server 0 - No, 1 - Yes
P145 = 1

# Automatic HTTP Upgrade. 0 - No, 1 - Yes (checking every defined days). Default is Yes.
P194 = 0

# Check for new firmware every () day, unit is in day, default is 7 days.
P193 = 

# Check for new firmware. 0 - Always, 1 - only when fw pre/postfix changes
P238 = 0

# Authenticate conf file. 0 - No, 1 - Yes
P240 = 0

#-----------------------------------------------------------------------------
# Time settings
#-----------------------------------------------------------------------------

# NTP Server
P30 =

# Time Zone. Offset in minutes to GMT plus 720 (0 = -12 hours)
P64 = 780

# Allow dhcp option 2 to override timezone. 0 - No, 1 - Yes
P143 = 1

# Daylight Savings Time. 0 - no, 1 - yes
P75 = 1

#-----------------------------------------------------------------------------
# General SIP Registration settings
#-----------------------------------------------------------------------------

# Keep-alive interval (in seconds. default 20 seconds)
P84 = 20

# STUN server
P76 = 

#-----------------------------------------------------------------------------
# Coming soon... (sic)
#-----------------------------------------------------------------------------

# G723 rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate
#P49 = 0

# iLBC payload type. Between 96 and 127, default is 97.
#P96 = 97

# iLBC Frame Size. 0 - 20ms(default), 1 - 30ms.
#P97 = 0

#-----------------------------------------------------------------------------
# General codec/voice quality settings
#-----------------------------------------------------------------------------

# Silence Suppression. 0 - no, 1 - yes
P50 = 0

# Voice Frames per TX (up to 10/20/32/64 frames for G711/G726/G723/other codecs respectively)
P37 = 2

# IP QoS (IP Diff-Serv or Precedence value for RTP)
P38 = 48

# Layer 2 QoS. 802.1Q/VLAN Tag (VLAN classification for RTP)
P51 = 0

# Layer 2 QoS. 802.1p priority value (0 - 7)
P87 = 0

# DTMF Payload Type
P79 = 101

# Send Flash Event (Flash will be sent as a DTMF event if set to Yes). 0 - no, 1 - yes
P74 = 0


#-----------------------------------------------------------------------------
# Misc settings
#-----------------------------------------------------------------------------


# Use # as Dial Key (if set to Yes, "#" will function as the "(Re-)Dial" key). 0 - no, 1 - yes
P72 = 1

# Offhook Auto-Dial (User ID/extension to dial automatically when offhook)
P71 =

# Disable Call-Waiting. 0 - No, 1 - Yes.
P91 = 0

# Use Quick IP-call mode. 0 - No, 1 - Yes
P184 = 0

# No Key Entry Timeout. Default - 4 seconds.
P85 = 8

# Lock Keypad Update. (configuration update via keypad is disabled if set to Yes)
# 0 - No, 1 - Yes.
P88 = 0

# Date Display Format. 0 - Year-Month-Day, 1 - Month-Day-Year, 2 - Day-Month-Year
P102 = 2

# Date display format. 0 - 12 hr, 1 - 24 hr
P122 = 1

# Display clock instead of date. 0 - No, 1 - Yes
P123 = 0


# Use custom ring tone 1 if incoming caller ID is the following:
P105 =

# Use custom ring tone 2 if incoming caller ID is the following:
P106 =

# Use custom ring tone 3 if incoming caller ID is the following:
P107 =


###########################################################
# GXP 2000 Multipurpose keys & other settings
###########################################################

# LCD Backlight always on. 0 - No, 1 - Yes
P322 = 0

#--- Key 1 ----
# Key Mode. 0 - Speed Dial, 1 - Asterisk BLF
P323 = 0
# Account (0..3 --> Line 1..4)
P301 = 0
# Name
P302 =
# User ID
P303 =

#--- Key 2 ----
# Key Mode. 0 - Speed Dial, 1 - Asterisk BLF
P324 = 0
# Account (0..3 --> Line 1..4)
P304 = 0
# Name
P305 =
# User ID
P306 =

#--- Key 3 ----
# Key Mode. 0 - Speed Dial, 1 - Asterisk BLF
P325 = 0
# Account (0..3 --> Line 1..4)
P307 = 0
# Name
P308 =
# User ID
P309 =

#--- Key 4 ----
# Key Mode. 0 - Speed Dial, 1 - Asterisk BLF
P326 = 0
# Account (0..3 --> Line 1..4)
P310 = 0
# Name
P311 =
# User ID
P312 =

#--- Key 5 ----
# Key Mode. 0 - Speed Dial, 1 - Asterisk BLF
P327 = 0
# Account (0..3 --> Line 1..4)
P313 = 0
# Name
P314 =
# User ID
P315 =

#--- Key 6 ----
# Key Mode. 0 - Speed Dial, 1 - Asterisk BLF
P328 = 0
# Account (0..3 --> Line 1..4)
P316 = 0
# Name
P317 =
# User ID
P318 =

#--- Key 7 ----
# Key Mode. 0 - Speed Dial, 1 - Asterisk BLF
P329 = 0
# Account (0..3 --> Line 1..4)
P319 = 0
# Name
P320 =
# User ID
P321 =


# ------ Settings for router mode ---------

# System Device Mode. 0 - Switch, 1 - router
P231 = 0

# WAN side http access: 0 - Disabled, 1 - enabled
P190 = 0

# ICMP reply on wan port: 0 - Disabled, 1 - enabled
P189 = 0

# Cloned WAN MAC Addr (2x6 digit hex format)
P115 = 
P116 = 
P117 = 
P118 = 
P119 = 
P120 = 

# LAN subnet mask
P110 = 

# LAN DHCP base IP
P111 = 

# DHCP Lease time
P112 = 

# DMZ IP
P113 = 

# ---------Port forwarding-----------

# Row #1
# WAN Port
P150 = 
# LAN IP
P158 = 
# LAN Port
P166 =
# Protocol. 0 - UDP, 1 - TCP, 2 - TCP/UDP
P174 =

# Row #2
# WAN Port
P151 = 
# LAN IP
P159 = 
# LAN Port
P167 =
# Protocol. 0 - UDP, 1 - TCP, 2 - TCP/UDP
P175 =

# Row #3
# WAN Port
P152 = 
# LAN IP
P160 = 
# LAN Port
P168 =
# Protocol. 0 - UDP, 1 - TCP, 2 - TCP/UDP
P176 =

# Row #4
# WAN Port
P153 = 
# LAN IP
P161 = 
# LAN Port
P169 =
# Protocol. 0 - UDP, 1 - TCP, 2 - TCP/UDP
P177 =

# Row #5
# WAN Port
P154 = 
# LAN IP
P162 = 
# LAN Port
P170 =
# Protocol. 0 - UDP, 1 - TCP, 2 - TCP/UDP
P178 =

# Row #6
# WAN Port
P155 = 
# LAN IP
P163 = 
# LAN Port
P171 =
# Protocol. 0 - UDP, 1 - TCP, 2 - TCP/UDP
P179 =

# Row #7
# WAN Port
P156 = 
# LAN IP
P164 = 
# LAN Port
P172 =
# Protocol. 0 - UDP, 1 - TCP, 2 - TCP/UDP
P180 =

# Row #8
# WAN Port
P157 = 
# LAN IP
P165 = 
# LAN Port
P173 =
# Protocol. 0 - UDP, 1 - TCP, 2 - TCP/UDP
P181 =


###########################################################
# GXP 2000 Line 1 - 4 Settings
###########################################################


# ------------------------------
# ----- Line 1 Settings --------
# ------------------------------

# Account active. 0 - No, 1 - Yes
P271 =

# Account name
P270 =

# SIP Server
P47 =

# Outbound Proxy
P48 =

# SIP User ID
P35 =

# Authentication ID
P36 =

# Authentication password
P34 =

# User Caller Name (John Doe)
P3 =

# Use DNS SRV. 0 - No, 1 - Yes.
P103 = 

# SIP User ID is phone number. 0 - no, 1 - yes
P63 = 0

# SIP Registration. 0 - no, 1 - yes
P31 = 1

# Unregister On Reboot. 0 - no, 1 - yes
P81 = 1

# Register Expiration (in minutes. default 1 hour, max 45 days)
P32 = 60

# Local SIP port (default 5060)
P40 = 5060

# SIP T1 Timeout (1/hundreth seconds)
P209 = 100

# SIP T2 Interval (1/hundreth seconds)
P250 = 400

# NAT Traversal. 0 - yes, 1 - no, 2 - no but send keepalives
P52 = 1

# SUBSCRIBE for MWI. Whether or not send SUBSCRIBE for Message Waiting Indication.  0 - No, 1 - Yes.
P99 = 1

# Voice Mail UserID (User ID/extension for 3rd party voice mail system)
P33 =

# Proxy-Require (A SIP extension to enable firewall penetration)
P197 =

# Send DTMF. 0 - in audio 1 - via RTP(RFC2833) 2 - via SIP INFO
P73 = 1

# Early Dial (use "Yes" only if proxy supports 484 response). 0 - no, 1 - yes
P29 = 0

# Dial Plan (dial plan prefix string)
P66 =

# Enable/Disable Call Features,  0 - No, 1 - Yes.
P191 = 1

# Disable Missed Call, 0 - No, 1 - Yes.
P182 = 0

# Session expiration (in seconds)
P260 = 180

# Min-SE (in seconds)
P261 = 90

# Caller Request Timer 0 - No, 1 - Yes/request for timer when making outbound calls
P262 = 0

# Callee Request Timer 0 - No, 1 - Yes(When caller supports timer but did not request one)
P263 = 0

# Force timer 0 - No, 1 - Yes(Use timer even when remote party does not support)
P264 = 0

# UAC Specify Refresher, 0 - Omit, 1 - UAC, 2 - UAS
P266 = 0

# UAS Specify Refresher, 1 - UAC, 2 - UAS(When UAC did not specify refresher tag)
P267 = 1

# Force INVITE, 0 - No, 1 - Yes
P265 = 0

# Enable 100rel, 0 - No, 1 - Yes
P272 = 0

# Default Ring Tone. 0 - system ring tone, 1..3 --> custom ring tone 1..3
P104 = 0

# Send Anonymous (caller ID will be blocked if set to Yes). 0 - no, 1 - yes
P65 = 0

# Auto Answer
P90 = 0

# Allow Auto Answer by Call-Info, 0 - No, 1 - Yes (for intercom?)
P298 = 1

# Turn off speaker on remote disconnect, 0 - No, 1 - Yes
P299 = 1

# Codec preference settings (1..8)
# 0 - G711u
# 2 - G.726-32 (supported?)
# 3 - GSM
# 4 - G.723.1
# 8 - G711a
# 9 - G.722 (supported?)
#15 - G.728 (supported?)
#18 - G.729A/B
#98 - iLBC (supported?)
P57 = 18
P58 = 3
P59 = 8
P60 = 0
P61 = 0
P62 = 0
P46 = 0
P98 = 0

# Special feature
# 100 - Standard
# 101 - Nortel MCS
# 102 - Broadsoft
# 108 - CBCOM
# 109 - RNK
# 110 - Sylantro
P198 = 100


# ------------------------------
# ----- Line 2 Settings --------
# ------------------------------

# Account active. 0 - No, 1 - Yes
P401 =

# Account name
P417 =

# SIP Server
P402 =

# Outbound Proxy
P403 =

# SIP User ID
P404 =

# Authentication ID
P405 =

# Authentication password
P406 =

# User Caller Name (John Doe)
P407 =

# Use DNS SRV. 0 - No, 1 - Yes.
P408 = 

# SIP User ID is phone number. 0 - no, 1 - yes
P409 = 0

# SIP Registration. 0 - no, 1 - yes
P410 = 1

# Unregister On Reboot. 0 - no, 1 - yes
P411 = 0

# Register Expiration (in minutes. default 1 hour, max 45 days)
P412 = 60

# Local SIP port
P413 = 5062

# SIP T1 Timeout (1/hundreth seconds)
P440 = 100

# SIP T2 Interval (1/hundreth seconds)
P441 = 400

# NAT Traversal. 0 - yes, 1 - no, 2 - no but send keepalives
P414 = 1

# SUBSCRIBE for MWI. Whether or not send SUBSCRIBE for Message Waiting Indication.  0 - No, 1 - Yes.
P415 = 1

# Voice Mail UserID (User ID/extension for 3rd party voice mail system)
P426 =

# Proxy-Require (A SIP extension to enable firewall penetration)
P418 =

# Send DTMF. 0 - in audio 1 - via RTP(RFC2833) 2 - via SIP INFO
P416 = 1

# Early Dial (use "Yes" only if proxy supports 484 response). 0 - no, 1 - yes
P422 = 0

# Dial Plan (dial plan prefix string)
P419 =

# Enable/Disable Call Features,  0 - No, 1 - Yes.
P420 = 1

# Disable Missed Call, 0 - No, 1 - Yes.
P442 = 0

# Session expiration (in seconds)
P434 = 180

# Min-SE (in seconds)
P427 = 90

# Caller Request Timer 0 - No, 1 - Yes/request for timer when making outbound calls
P428 = 0

# Callee Request Timer 0 - No, 1 - Yes(When caller supports timer but did not request one)
P429 = 0

# Force timer 0 - No, 1 - Yes(Use timer even when remote party does not support)
P430 = 0

# UAC Specify Refresher, 0 - Omit, 1 - UAC, 2 - UAS
P432 = 0

# UAS Specify Refresher, 1 - UAC, 2 - UAS(When UAC did not specify refresher tag)
P433 = 1

# Force INVITE, 0 - No, 1 - Yes
P431 = 0

# Enable 100rel, 0 - No, 1 - Yes
P435 = 0

# Default Ring Tone. 0 - system ring tone, 1..3 --> custom ring tone 1..3
P423 = 0

# Send Anonymous (caller ID will be blocked if set to Yes). 0 - no, 1 - yes
P421 = 0

# Auto Answer
P425 = 0

# Allow Auto Answer by Call-Info, 0 - No, 1 - Yes (for intercom?)
P438 = 1

# Turn off speaker on remote disconnect, 0 - No, 1 - Yes
P439 = 0

# Codec preference settings (1..8)
# 0 - G711u
# 2 - G.726-32 (supported?)
# 3 - GSM
# 4 - G.723.1
# 8 - G711a
# 9 - G.722 (supported?)
#15 - G.728 (supported?)
#18 - G.729A/B
#98 - iLBC (supported?)
P451 = 18
P452 = 3
P453 = 8
P454 = 0
P455 = 0
P456 = 0
P457 = 0
P458 = 0

# Special feature
# 100 - Standard
# 101 - Nortel MCS
# 102 - Broadsoft
# 108 - CBCOM
# 109 - RNK
# 110 - Sylantro
P424 = 100


# ------------------------------
# ----- Line 3 Settings --------
# ------------------------------

# Account active. 0 - No, 1 - Yes
P501 =

# Account name
P517 =

# SIP Server
P502 =

# Outbound Proxy
P503 =

# SIP User ID
P504 =

# Authentication ID
P505 =

# Authentication password
P506 =

# User Caller Name (John Doe)
P507 =

# Use DNS SRV. 0 - No, 1 - Yes.
P508 = 

# SIP User ID is phone number. 0 - no, 1 - yes
P509 = 0

# SIP Registration. 0 - no, 1 - yes
P510 = 1

# Unregister On Reboot. 0 - no, 1 - yes
P511 = 0

# Register Expiration (in minutes. default 1 hour, max 45 days)
P512 = 60

# Local SIP port
P513 = 5064

# SIP T1 Timeout (1/hundreth seconds)
P540 = 100

# SIP T2 Interval (1/hundreth seconds)
P541 = 400

# NAT Traversal. 0 - yes, 1 - no, 2 - no but send keepalives
P514 = 1

# SUBSCRIBE for MWI. Whether or not send SUBSCRIBE for Message Waiting Indication.  0 - No, 1 - Yes.
P515 = 1

# Voice Mail UserID (User ID/extension for 3rd party voice mail system)
P526 =

# Proxy-Require (A SIP extension to enable firewall penetration)
P518 =

# Send DTMF. 0 - in audio 1 - via RTP(RFC2833) 2 - via SIP INFO
P516 = 1

# Early Dial (use "Yes" only if proxy supports 484 response). 0 - no, 1 - yes
P522 = 0

# Dial Plan (dial plan prefix string)
P519 =

# Enable/Disable Call Features,  0 - No, 1 - Yes.
P520 = 1

# Disable Missed Call, 0 - No, 1 - Yes.
P542 = 0

# Session expiration (in seconds)
P534 = 180

# Min-SE (in seconds)
P527 = 90

# Caller Request Timer 0 - No, 1 - Yes/request for timer when making outbound calls
P528 = 0

# Callee Request Timer 0 - No, 1 - Yes(When caller supports timer but did not request one)
P529 = 0

# Force timer 0 - No, 1 - Yes(Use timer even when remote party does not support)
P530 = 0

# UAC Specify Refresher, 0 - Omit, 1 - UAC, 2 - UAS
P532 = 0

# UAS Specify Refresher, 1 - UAC, 2 - UAS(When UAC did not specify refresher tag)
P533 = 1

# Force INVITE, 0 - No, 1 - Yes
P531 = 0

# Enable 100rel, 0 - No, 1 - Yes
P535 = 0

# Default Ring Tone. 0 - system ring tone, 1..3 --> custom ring tone 1..3
P523 = 0

# Send Anonymous (caller ID will be blocked if set to Yes). 0 - no, 1 - yes
P521 = 0

# Auto Answer
P525 = 0

# Allow Auto Answer by Call-Info, 0 - No, 1 - Yes (for intercom?)
P538 = 1

# Turn off speaker on remote disconnect, 0 - No, 1 - Yes
P539 = 0

# Codec preference settings (1..8)
# 0 - G711u
# 2 - G.726-32 (supported?)
# 3 - GSM
# 4 - G.723.1
# 8 - G711a
# 9 - G.722 (supported?)
#15 - G.728 (supported?)
#18 - G.729A/B
#98 - iLBC (supported?)
P551 = 18
P552 = 3
P553 = 8
P554 = 0
P555 = 0
P556 = 0
P557 = 0
P558 = 0

# Special feature
# 100 - Standard
# 101 - Nortel MCS
# 102 - Broadsoft
# 108 - CBCOM
# 109 - RNK
# 110 - Sylantro
P524 = 100


# ------------------------------
# ----- Line 4 Settings --------
# ------------------------------

# Account active. 0 - No, 1 - Yes
P601 =

# Account name
P617 =

# SIP Server
P602 =

# Outbound Proxy
P603 =

# SIP User ID
P604 =

# Authentication ID
P605 =

# Authentication password
P606 =

# User Caller Name (John Doe)
P607 =

# Use DNS SRV. 0 - No, 1 - Yes.
P608 = 

# SIP User ID is phone number. 0 - no, 1 - yes
P609 = 0

# SIP Registration. 0 - no, 1 - yes
P610 = 1

# Unregister On Reboot. 0 - no, 1 - yes
P611 = 0

# Register Expiration (in minutes. default 1 hour, max 45 days)
P612 = 60

# Local SIP port
P613 = 5066

# SIP T1 Timeout (1/hundreth seconds)
P640 = 100

# SIP T2 Interval (1/hundreth seconds)
P641 = 400

# NAT Traversal. 0 - yes, 1 - no, 2 - no but send keepalives
P614 = 1

# SUBSCRIBE for MWI. Whether or not send SUBSCRIBE for Message Waiting Indication.  0 - No, 1 - Yes.
P615 = 1

# Voice Mail UserID (User ID/extension for 3rd party voice mail system)
P626 =

# Proxy-Require (A SIP extension to enable firewall penetration)
P618 =

# Send DTMF. 0 - in audio 1 - via RTP(RFC2833) 2 - via SIP INFO
P616 = 1

# Early Dial (use "Yes" only if proxy supports 484 response). 0 - no, 1 - yes
P622 = 0

# Dial Plan (dial plan prefix string)
P619 =

# Enable/Disable Call Features,  0 - No, 1 - Yes.
P620 = 1

# Disable Missed Call, 0 - No, 1 - Yes.
P642 = 0

# Session expiration (in seconds)
P634 = 180

# Min-SE (in seconds)
P627 = 90

# Caller Request Timer 0 - No, 1 - Yes/request for timer when making outbound calls
P628 = 0

# Callee Request Timer 0 - No, 1 - Yes(When caller supports timer but did not request one)
P629 = 0

# Force timer 0 - No, 1 - Yes(Use timer even when remote party does not support)
P630 = 0

# UAC Specify Refresher, 0 - Omit, 1 - UAC, 2 - UAS
P632 = 0

# UAS Specify Refresher, 1 - UAC, 2 - UAS(When UAC did not specify refresher tag)
P633 = 1

# Force INVITE, 0 - No, 1 - Yes
P631 = 0

# Enable 100rel, 0 - No, 1 - Yes
P635 = 0

# Default Ring Tone. 0 - system ring tone, 1..3 --> custom ring tone 1..3
P623 = 0

# Send Anonymous (caller ID will be blocked if set to Yes). 0 - no, 1 - yes
P621 = 0

# Auto Answer
P625 = 0

# Allow Auto Answer by Call-Info, 0 - No, 1 - Yes (for intercom?)
P638 = 1

# Turn off speaker on remote disconnect, 0 - No, 1 - Yes
P639 = 0

# Codec preference settings (1..8)
# 0 - G711u
# 2 - G.726-32 (supported?)
# 3 - GSM
# 4 - G.723.1
# 8 - G711a
# 9 - G.722 (supported?)
#15 - G.728 (supported?)
#18 - G.729A/B
#98 - iLBC (supported?)
P651 = 18
P652 = 3
P653 = 8
P654 = 0
P655 = 0
P656 = 0
P657 = 0
P658 = 0

# Special feature
# 100 - Standard
# 101 - Nortel MCS
# 102 - Broadsoft
# 108 - CBCOM
# 109 - RNK
# 110 - Sylantro
P624 = 100