Description: Import older changes to upstream source These changes have been carried by prior versions of the Debian package for a long time and have not been split out into separate patches. Last-Update: 2020-04-26 --- hercules-3.13.orig/Makefile.am +++ hercules-3.13/Makefile.am @@ -98,13 +98,14 @@ endif if OPTION_DYNAMIC_LOAD DYNSRC = - LTDL = ltdl.c + LTDL = DYNMOD_LD_FLAGS = -module \ -no-undefined \ $(XSTATIC) \ -export-dynamic \ - -avoid-version + -avoid-version \ + $(LDFLAGS) DYNMOD_LD_ADD = libherc.la \ libhercs.la \ @@ -114,7 +115,8 @@ if OPTION_DYNAMIC_LOAD LIB_LD_FLAGS = -export-dynamic \ $(XSTATIC) \ -no-undefined \ - -avoid-version + -avoid-version \ + $(LDFLAGS) else DYNSRC = $(dyndev_SRC) LTDL = @@ -372,8 +374,7 @@ endif memrchr.c \ $(dynamic_SRC) \ $(extra_SRC) \ - $(dyndev_SRC) \ - ltdl.c + $(dyndev_SRC) libherc_la_LDFLAGS = $(LIB_LD_FLAGS) @@ -382,6 +383,7 @@ endif libherct.la \ libhercd.la \ decNumber/libdecNumber.la \ + -lltdl \ softfloat/libsoftfloat.la \ $(LDADD) @@ -440,17 +442,17 @@ endif hercules_SOURCES = bootstrap.c \ hdlmain.c - hercules_LDADD = libherc.la libhercs.la $(LDADD) + hercules_LDADD = libherc.la libhercs.la libhercd.la libhercu.la -lltdl $(LDADD) hercules_LDFLAGS = $(HLDFLAGS) - hercules_DEPENDENCIES = libherc.la libhercs.la $(HDEPS) + hercules_DEPENDENCIES = libherc.la libhercs.la libhercd.la libhercu.la -lltdl $(HDEPS) if BUILD_SHARED herclin_SOURCES = herclin.c hdlmain.c -herclin_LDADD = libherc.la libhercs.la $(LDADD) +herclin_LDADD = libherc.la libhercs.la libhercd.la libhercu.la -lltdl $(LDADD) herclin_LDFLAGS = $(HLDFLAGS) -herclin_DEPENDENCIES = libherc.la libhercs.la $(HDEPS) +herclin_DEPENDENCIES = libherc.la libhercs.la libhercd.la libhercu.la -lltdl $(HDEPS) endif # @@ -656,7 +658,6 @@ noinst_HEADERS = hostinfo.h \ hdl.h \ crypto.h \ sockdev.h \ - ltdl.h \ herc_getopt.h \ service.h \ chsc.h \ --- hercules-3.13.orig/autoconf/hercules.m4 +++ hercules-3.13/autoconf/hercules.m4 @@ -207,6 +207,7 @@ AC_DEFUN([HC_ARG_ENABLE_GETOPTWRAPPER], AC_DEFUN([_HC_CHECK_NEED_GETOPT_WRAPPER], [ AC_REQUIRE([AC_PROG_LIBTOOL]) + LT_OUTPUT AC_MSG_CHECKING([whether getopt wrapper kludge is necessary]) if test "$1" != "auto"; then --- hercules-3.13.orig/configure.ac +++ hercules-3.13/configure.ac @@ -15,7 +15,6 @@ AM_INIT_AUTOMAKE(hercules,3.13) AM_CONFIG_HEADER(config.h) # (the file the resulting configure script will produce) AM_MAINTAINER_MODE() AC_CANONICAL_HOST() # (sets $host_cpu, $host_vendor, and $host_os) -m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])]) ############################################################################### # Programs section... @@ -39,151 +38,8 @@ modexecdir='$(libdir)/$(PACKAGE)' AC_SUBST(modexecdir) -# ----------------------------------------------------------------------------- -# -# AC_LIBTOOL_DLOPEN -# -# Enable checking for dlopen support. This macro should be used if the -# package makes use of the '-dlopen' and '-dlpreopen' flags, otherwise -# libtool will assume that the system does not support dlopening. The -# macro must be called before AC_PROG_LIBTOOL. -# -# ----------------------------------------------------------------------------- - -AC_LIBTOOL_DLOPEN() # (we need libtool's dlopen support) - - -# ----------------------------------------------------------------------------- -# -# AC_LIBTOOL_WIN32_DLL -# -# This macro should be used if the package has been ported to build -# clean dlls on win32 platforms. Usually this means that any library -# data items are exported with __declspec(dllexport) and imported with -# __declspec(dllimport). If this macro is not used, libtool will assume -# that the package libraries are not dll clean and will build only static -# libraries on win32 hosts. -# -# This macro must be called before AC_PROG_LIBTOOL, and provision must -# be made to pass '-no-undefined' to libtool in link mode from the package -# Makefile. Naturally, if you pass '-no-undefined', you must ensure that -# all the library symbols really are defined at link time! -# -# ----------------------------------------------------------------------------- - -AC_LIBTOOL_WIN32_DLL() # (we need Win32 support in libtool) - - -# ----------------------------------------------------------------------------- -# See: 'AC_PROG_LIBTOOL' below. -# ----------------------------------------------------------------------------- - -AC_DISABLE_STATIC() # (forces libtool to build shared - - # libraries instead of static ones) -# ----------------------------------------------------------------------------- -# AC_PROG_LIBTOOL -# -# Add support for the '--enable-shared' and '--disable-shared' -# configure flags. By default, this macro turns on shared libraries -# if they are available, and also enables static libraries if they -# don't conflict with the shared libraries. You can modify these -# defaults by calling either the AC_DISABLE_SHARED or AC_DISABLE_STATIC -# macros. -# -# Hercules REQUIRES shared libraries (i.e. DLLs), so we do indeed use -# the AC_DISABLE_STATIC macro above. -# -# ----------------------------------------------------------------------------- - -AC_PROG_LIBTOOL() # (we build libtool for ourselves) - - -# ----------------------------------------------------------------------------- -# -# AC_LIB_LTDL -# -# Even though libltdl is installed together with libtool, you may wish -# to include libltdl in the distribution of your package, for the convenience -# of users of your package that don't have libtool or libltdl installed. -# -# The most simplistic way to add libltdl to your package is to copy the -# source files, 'ltdl.c' and 'ltdl.h', to a source directory withing your -# package and to build and link them along with the rest of your sources. -# -# To do this, you must add a call to the 'AC_LIB_LTDL' macro to your package's -# 'configure.in' to perform the required configure time checks in order that -# 'ltdl.o' is built correctly. -# -# This method does have its problems though: if you try to link the package -# binaries with an installed libltdl, or a library which depends on libltdl, -# you may have problems with duplicate symbol definitions. -# -# In order to enable this flavor of libltdl, you should add the line -# 'AC_LIBLTDL_CONVENIENCE' to your `configure.in', before 'AC_PROG_LIBTOOL'. -# -# In order to select the installable version of libltdl, you should add a -# call of the macro 'AC_LIBLTDL_INSTALLABLE' to your 'configure.in' before -# 'AC_PROG_LIBTOOL'. This macro will check whether libltdl is already -# installed and, if not, request the libltdl embedded in your package to be -# built and installed. -# -# Whatever macro you use, it is up to you to ensure that your 'configure.in' -# will configure libltdl, using 'AC_CONFIG_SUBDIRS', and that your 'Makefile's -# will start sub-makes within libltdl's directory, using automake's SUBDIRS, -# for example. Both macros define the shell variables LIBLTDL, to the link flag -# that you should use to link with libltdl, and LTDLINCL, to the preprocessor -# flag that you should use to compile with programs that include 'ltdl.h'. It -# is up to you to use 'AC_SUBST' to ensure that this variable will be available -# in 'Makefile's, or add them to variables that are 'AC_SUBST'ed by default, -# such as LIBS and CPPFLAGS. -# -# So, when you want to link a program with libltdl, be it a convenience, -# installed or installable library, just compile with '$(LTDLINCL)' and link -# it with '$(LIBLTDL)', using libtool. -# -# You should probably also add 'AC_LIBTOOL_DLOPEN' to your 'configure.in' before -# 'AC_PROG_LIBTOOL', otherwise libtool will assume no dlopening mechanism is -# supported, and revert to dlpreopening, which is probably not what you want. -# -# The following example shows you how to embed the convenience libltdl -# in your package. In order to use the installable variant just replace -# 'AC_LIBLTDL_CONVENIENCE' with 'AC_LIBLTDL_INSTALLABLE'. We assume that libltdl -# was embedded using 'libtoolize --ltdl': -# -# configure.in: -# -# ... -# dnl Enable building of the convenience library -# dnl and set LIBLTDL accordingly -# AC_LIBLTDL_CONVENIENCE -# dnl Substitute LTDLINCL and LIBLTDL in the Makefiles -# AC_SUBST(LTDLINCL) -# AC_SUBST(LIBLTDL) -# dnl Check for dlopen support -# AC_LIBTOOL_DLOPEN -# dnl Configure libtool -# AC_PROG_LIBTOOL -# dnl Configure libltdl -# AC_CONFIG_SUBDIRS(libltdl) -# ... -# -# Makefile.am: -# -# ... -# SUBDIRS = libltdl -# -# INCLUDES = $(LTDLINCL) -# -# myprog_LDFLAGS = -export-dynamic -# # The quotes around -dlopen below fool automake <= 1.4 into accepting it -# myprog_LDADD = $(LIBLTDL) "-dlopen" self "-dlopen" foo1.la -# myprog_DEPENDENCIES = $(LIBLTDL) foo1.la -# ... -# -# ----------------------------------------------------------------------------- - -AC_LIB_LTDL() # (we need the ltdl libtool library) +LT_INIT([dlopen win32-dll disable-static]) +LTDL_INIT([]) AC_SUBST([LIBTOOL_DEPS]) # (see PROGRAMMING NOTE above) --- hercules-3.13.orig/crypto/Makefile.am +++ hercules-3.13/crypto/Makefile.am @@ -23,7 +23,7 @@ endif if OPTION_DYNAMIC_LOAD DYNSRC = - LTDL = ../ltdl.c + LTDL = DYNMOD_LD_FLAGS = -module \ -no-undefined \ --- hercules-3.13.orig/decNumber/Makefile.am +++ hercules-3.13/decNumber/Makefile.am @@ -37,7 +37,7 @@ else endif if OPTION_DYNAMIC_LOAD - LTDL = ../ltdl.c + LTDL = LIB_LD_FLAGS = -export-dynamic \ $(XSTATIC) \ -no-undefined \ --- hercules-3.13.orig/machdep.h +++ hercules-3.13/machdep.h @@ -572,10 +572,14 @@ U32 *ptr4, val4, old4, new4; #endif /*------------------------------------------------------------------- - * Activate OPTION_STRICT_ALIGNMENT to generate different paths - * for non-aligned and aligned accesses in certain instructions + * Decide if strict alignment is required *-------------------------------------------------------------------*/ -#define OPTION_STRICT_ALIGNMENT +#if !defined(OPTION_STRICT_ALIGNMENT) && !defined(OPTION_NO_STRICT_ALIGNMENT) + #if !defined(_MSVC_) && !defined(_ext_ia32) && !defined(_ext_amd64) \ + && !defined(_ext_ppc) + #define OPTION_STRICT_ALIGNMENT + #endif +#endif /*------------------------------------------------------------------- * fetch_hw_noswap and fetch_hw --- hercules-3.13.orig/man/Makefile.am +++ hercules-3.13/man/Makefile.am @@ -1,4 +1,4 @@ -man_MANS = cckddiag.1 cckd.4 dasdseq.1 hercules.1 +man_MANS = cckddiag.1 cckd.4 dasdseq.1 cfba2fba.1 dasdcat.1 dasdconv.1 dasdcopy.1 dasdinit.1 fba2cfba.1 hercules.1 EXTRA_DIST = $(man_MANS) --- /dev/null +++ hercules-3.13/man/cfba2fba.1 @@ -0,0 +1,48 @@ +.TH "CFBA2FBA" "1" +.SH "NAME" +cfba2fba \- copy a compressed FBA DASD file to a plain FBA DASD file +.SH "SYNOPSIS" +.PP +\fBcfba2fba\fR [\fB-\fIoptions\fR\fP] \fBifile\fR [\fBsf=sfile\fR] \fBofile\fR +.SH "DESCRIPTION" +.PP +This manual page documents the cfba2fba program. +.PP +cfba2fba copies a compressed FBA file to a FBA file. +.SH "PARAMETERS" +.IP "\fBifile\fR " 10 +input compressed FBA DASD file +.IP "\fBsfile\fR " 10 +input compressed FBA shadow file (optional) +.IP "\fBofile\fR " 10 +output fba dasd file +.SH "OPTIONS" +.IP "\fB-v\fR " 10 +display program version and quit +.IP "\fB-h\fR " 10 +display help and quit +.IP "\fB-q\fR " 10 +quiet mode, don't display status +.IP "\fB-r\fR " 10 +replace the output file if it exists +.IP "\fB-lfs\fR " 10 +create single large output file +.IP "\fB-blks n\fR " 10 +size of output file +.SH "SEE ALSO" +.PP +The programs are documented fully by \fIThe Hercules +System/370, ESA/390, and z/Architecture Emulator\fP available in +\fB/usr/share/doc/hercules/html\fP. +.SH "AUTHOR" +Hercules was created by Roger Bowler and is maintained by +Jay Maynard. Jan Jaeger designed and implemented many of the +advanced features of Hercules, including dynamic +reconfiguration, integrated console, interpretive execution, and +z/Architecture support. +.PP +This manual page was written by Peter De Schrijver p2@debian.org for +the \fBDebian GNU/Linux\fP system (but may be used by others). Permission is +granted to copy, distribute and/or modify this document under +the terms of the GPL. + --- /dev/null +++ hercules-3.13/man/dasdcat.1 @@ -0,0 +1,53 @@ +.TH "DASDCAT" "1" +.SH "NAME" +DASDCAT \- display pds datasets and members from a DASD image file +.SH "SYNOPSIS" +.PP +\fBdasdcat\fR [\fB-i\fR \fIdasd_image\fP [\fBsf=\fR\fIshadowfile\fP] \fIpdsname\fP\fB/\fR\fIspec\fP\fB:\fR\fIflags\fP] +.SH "DESCRIPTION" +.PP +This manual page documents the dasdcat program. +.PP +The dasdcat utility displays pds datasets and members from a DASD image file. +.SH "PARAMETERS" +.IP "\fBdasd_image\fR" 10 +input DASD filename +.IP "\fBshadowfile\fR" 10 +associated shadow DASD filename (optional) +.IP "\fBpdsname\fR" 10 +name of the partitioned dataset from which information will be extracted +.IP "\fBspec\fR" 10 +\fBspec\fR can be one of the following : +.RS 10 +.IP "\(bu \fBname\fR" 10 +list PDS member \fBname\fR +.IP "\(bu \fB*\fR" 10 +list all PDS members +.IP "\(bu \fB?\fR" 10 +list the membernames of the PDS +.RE +.IP "\fBflags\fR" 10 +\fBflags\fR can be one of the following : +.RS 10 +.IP "\(bu \fBc\fR" 10 +list members as cards +.IP "\(bu \fBa\fR" 10 +list members in ASCII +.RE +.PP +.SH "SEE ALSO" +The programs are documented fully by \fIThe Hercules +System/370, ESA/390, and z/Architecture Emulator\fP available in +\fB/usr/share/doc/hercules/html\fP. +.SH "AUTHOR" +Hercules was created by Roger Bowler and is maintained by +Jay Maynard. Jan Jaeger designed and implemented many of the +advanced features of Hercules, including dynamic +reconfiguration, integrated console, interpretive execution, and +z/Architecture support. +.PP +This manual page was written by Peter De Schrijver p2@debian.org for +the \fBDebian GNU/Linux\fP system (but may be used by others). Permission is +granted to copy, distribute and/or modify this document under +the terms of the GPL. + --- /dev/null +++ hercules-3.13/man/dasdconv.1 @@ -0,0 +1,40 @@ +.TH "DASDCONV" "1" +.SH "NAME" +DASDCONV \- convert a CKD disk image from HDR-30 to AWSCKD format +.SH "SYNOPSIS" +.PP +\fBdasdconv\fR [\fB-r\fR] [\fB-lfs\fR] [\fB-q\fR]\fP \fIinfile\fP \fIoutfile\fP +.SH "DESCRIPTION" +.PP +This manual page documents the dasdconv program. +.PP +dasdconv converts a CKD disk image from HDR-30 format to AWSCKD format. +.SH "PARAMETERS" +.IP "\fBinfile\fR" 10 +input ckd dasd file in HDR-30 format +.IP "\fBoutfile\fR" 10 +output ckd dasd file in AWSCKD format. If the image is bigger then 2GB multiple files will creates with names suffixed _1, _2, etc. +.SH "OPTIONS" +.IP "\fB-r\fR" 10 +Overwrite the existing outfile. By default no files will be overwritten. +.IP "\fB-lfs\fR" 10 +Output CKD file will be a single file even if it exceeds 2GB in size. +.IP "\fB-q\fR" 10 +Quiet +.SH "SEE ALSO" +.PP +The programs are documented fully by \fIThe Hercules +System/370, ESA/390, and z/Architecture Emulator\fP available in +\fB/usr/share/doc/hercules/html\fP. +.SH "AUTHOR" +Hercules was created by Roger Bowler and is maintained by +Jay Maynard. Jan Jaeger designed and implemented many of the +advanced features of Hercules, including dynamic +reconfiguration, integrated console, interpretive execution, and +z/Architecture support. +.PP +This manual page was written by Peter De Schrijver p2@debian.org for +the \fBDebian GNU/Linux\fP system (but may be used by others). Permission is +granted to copy, distribute and/or modify this document under +the terms of the GPL. + --- /dev/null +++ hercules-3.13/man/dasdcopy.1 @@ -0,0 +1,60 @@ +.TH "DASDCOPY" "1" +.SH "NAME" +dasdcopy \- copy a DASD file to another DASD file +.SH "SYNOPSIS" +.PP +\fBdasdcopy\fR [\fB-v\fR] [\fB-h\fR] [\fB-q\fR] [\fB-r\fR] [\fB-z\fR] [\fB-bz2\fR] [\fB-0\fR] [\fB-a\fR] [\fB-lfs\fR] [\fB-blks\fR \fIn\fP] [\fB-cyls\fR \fIn\fP] [\fB-o\fR \fItype\fP] \fIifile\fP [\fBsf=\fR\fIsfile\fP] \fIofile\fP +.SH "DESCRIPTION" +.PP +This manual page documents the dasdcopy program. +.PP +dasdcopy copies a DASD file to another DASD file. +.SH "PARAMETERS" +.IP "\fBifile\fR" 10 +input FBA DASD file +.IP "\fBsfile\fR" 10 +input compressed FBA shadow file (optional) +.IP "\fBofile\fR" 10 +output compressed FBA DASD file +.SH "OPTIONS" +.IP "\fB-v\fR" 10 +display program version and quit +.IP "\fB-h\fR" 10 +display help and quit +.IP "\fB-q\fR" 10 +quiet mode, don't display status +.IP "\fB-r\fR" 10 +replace the output file if it exists +.IP "\fB-blks n\fR" 10 +size of output FBA file +.IP "\fB-cyls n\fR" 10 +size of output CKD file +.IP "\fB-z\fR" 10 +compress using output zlib [default] +.IP "\fB-bz2\fR" 10 +compress using output bzip2 +.IP "\fB-0\fR" 10 +don't compress output +.IP "\fB-a\fR" 10 +output ckd file will have alternate cylinders +.IP "\fB-lfs\fR" 10 +output ckd file will be a single file even if it exceeds 2GB in size +.IP "\fB-o type\fR" 10 +output file type (CKD, CCKD, FBA, CFBA) +.SH "SEE ALSO" +.PP +The programs are documented fully by \fIThe Hercules +System/370, ESA/390, and z/Architecture Emulator\fP available in +\fB/usr/share/doc/hercules/html\fP. +.SH "AUTHOR" +Hercules was created by Roger Bowler and is maintained by +Jay Maynard. Jan Jaeger designed and implemented many of the +advanced features of Hercules, including dynamic +reconfiguration, integrated console, interpretive execution, and +z/Architecture support. +.PP +This manual page was written by Peter De Schrijver p2@debian.org for +the \fBDebian GNU/Linux\fP system (but may be used by others). Permission is +granted to copy, distribute and/or modify this document under +the terms of the GPL. + --- /dev/null +++ hercules-3.13/man/dasdinit.1 @@ -0,0 +1,53 @@ +.TH DASDLIST "1" +.SH "NAME" +dasdlist \- build an empty DASD image file +.SH "SYNOPSIS" +.PP +dasdinit [\fB-v\fR] [\fB-z\fR] [\fB-bz2\fR] [\fB-0\fR] [\fB-lfs\fR] [\fB-a\fR] [\fB-r\fR] [\fB-linux\fR] \fIfilename\fP \fIdevtype\fP[\fB-\fR\fImodel\fP] [\fIvolser\fP] [\fIsize\fP] +.PP +This manual page documents the dasdinit program. +.PP +dasdlist builds an empty DASD image file +.SH "PARAMETERS" +.IP "\fBfilename\fR " 10 +name of DASD image file to be created +.IP "\fBdevtype\fR " 10 +emulated device type +.IP "\fBmodel\fR " 10 +emulated device model (optional) +.IP "\fBvolser\fR " 10 +volume serial number (1-6 characters) (only if '-r' option not used) +.IP "\fBsize\fR " 10 +number of cylinders (for CKD devices) or 512-byte sectors (for FBA devices) (optional if device specified) +.SH "OPTIONS" +.IP "\fB-v\fR " 10 +display version info and help +.IP "\fB-z\fR " 10 +build compressed DASD image file using zlib +.IP "\fB-bz2\fR " 10 +build compressed DASD image file using bzip2 +.IP "\fB-0\fR " 10 +build compressed DASD image file with no compression +.IP "\fB-lfs\fR " 10 +build a large (uncompressed) DASD file (if supported) +.IP "\fB-a\fR " 10 +build DASD image file that includes alternate cylinders (option ignored if size is manually specified) +.IP "\fB-r\fR " 10 +build 'raw' DASD image file (no VOL1 or IPL track) +.IP "\fB-linux\fR " 10 +null track images will look like linux dasdfmt'ed images (3390 device type only) +.SH "SEE ALSO" +.PP +\fB/usr/share/doc/hercules/html/hercload.html\fP +.SH "AUTHOR" +Hercules was created by Roger Bowler and is maintained by +Jay Maynard. Jan Jaeger designed and implemented many of the +advanced features of Hercules, including dynamic +reconfiguration, integrated console, interpretive execution, and +z/Architecture support. +.PP +This manual page was written by Peter De Schrijver p2@debian.org for +the \fBDebian GNU/Linux\fP system (but may be used by others). Permission is +granted to copy, distribute and/or modify this document under +the terms of the GPL. + --- /dev/null +++ hercules-3.13/man/fba2cfba.1 @@ -0,0 +1,50 @@ +.TH "FBA2CFBA" "1" +.SH "NAME" +fba2cfba \- copy a FBA dasd file to a compressed FBA DASD file +.SH "SYNOPSIS" +.PP +\fBfba2cfba\fR [\fB-\fIoptions\fR\fP] \fBifile\fR \fBofile\fR +.SH "DESCRIPTION" +.PP +This manual page documents the fba2cfba program. +.PP +fba2cfba copies a FBA DASD file to a compressed FBA DASD file. +.SH "PARAMETERS" +.IP "\fBifile\fR " 10 +input FBA DASD file +.IP "\fBofile\fR " 10 +output compressed FBA DASD file +.SH "OPTIONS" +.IP "\fB-v\fR " 10 +display program version and quit +.IP "\fB-h\fR " 10 +display help and quit +.IP "\fB-q\fR " 10 +quiet mode, don't display status +.IP "\fB-r\fR " 10 +replace the output file if it exists +.IP "\fB-blks n\fR " 10 +size of output file +.IP "\fB-z\fR " 10 +compress using zlib [default] +.IP "\fB-bz2\fR " 10 +compress using bzip2 +.IP "\fB-0\fR " 10 +don't compress track images +.SH "SEE ALSO" +.PP +The programs are documented fully by \fIThe Hercules +System/370, ESA/390, and z/Architecture Emulator\fP available in +\fB/usr/share/doc/hercules/html\fP. +.SH "AUTHOR" +Hercules was created by Roger Bowler and is maintained by +Jay Maynard. Jan Jaeger designed and implemented many of the +advanced features of Hercules, including dynamic +reconfiguration, integrated console, interpretive execution, and +z/Architecture support. +.PP +This manual page was written by Peter De Schrijver p2@debian.org for +the \fBDebian GNU/Linux\fP system (but may be used by others). Permission is +granted to copy, distribute and/or modify this document under +the terms of the GPL. + --- /dev/null +++ hercules-3.13/man/hercules.1.debdiff @@ -0,0 +1,45 @@ +.TH "HERCULES" "1" +.SH "NAME" +hercules \(em System/370, ESA/390 and z/Architecture Emulator +.SH "SYNOPSIS" +.PP +\fBhercules\fR [\fB-f \fIconfig-file\fR\fP] +.SH "DESCRIPTION" +.PP +This manual page documents briefly the +\fBhercules\fR program. +.PP +This manual page was written for the \fBDebian GNU/Linux\fP distribution +because the original program does not have a manual page. +Instead, it has documentation in HTML format; see below. +.PP +\fBHercules\fP is an open source +software implementation of the mainframe System/370 and ESA/390 +architectures, in addition to the new 64-bit z/Architecure. +Hercules runs under Linux, Windows 98, Windows NT, and Windows +2000. +.SH "OPTIONS" +.IP "\fB-f\fP " 10 +Use a config file other than +\fB/etc/hercules/hercules.cnf\fP +.SH "SEE ALSO" +.PP +The programs are documented fully by \fIThe Hercules +System/370, ESA/390, and z/Architecture Emulator\fP available in +\fB/usr/share/doc/hercules/html\fP. +.SH "AUTHOR" +.PP +Hercules was created by Roger Bowler and is maintained by +Jay Maynard. Jan Jaeger designed and implemented many of the +advanced features of Hercules, including dynamic +reconfiguration, integrated console, interpretive execution, and +z/Architecture support. +.PP +This manual page was written by Matt Zimmerman mdz@debian.org for +the \fBDebian GNU/Linux\fP system (but may be used by others). Permission is +granted to copy, distribute and/or modify this document under +the terms of the GNU Free Documentation +License, Version 1.1 or any later version published by the Free +Software Foundation; with no Invariant Sections, no Front-Cover +Texts and no Back-Cover Texts. +.\" created by instant / docbook-to-man, Tue 23 Mar 2010, 22:07 --- /dev/null +++ hercules-3.13/util/dasdlist.1 @@ -0,0 +1,30 @@ +.TH "DASDLIST" "1" +.SH "NAME" +dasdlist +.SH "SYNOPSIS" +.PP +\fBdasdlist\fR \fBfilename\fR [\fBcyl head\fR] +.SH "DESCRIPTION" +.PP +This manual page documents the dasdlist program. +.PP +dasdlist dumps a track from a CKD DASD image file. +.SH "PARAMETERS" +.IP "\fBfilename\fR" 10 +input CKD DASD file +.IP "\fBcyl\fR" 10 +cylinder number of track to dump +.IP "\fBhead\fR" 10 +head number of track to dump +.SH "SEE ALSO" +.PP +The programs are documented fully by \fIThe Hercules +System/370, ESA/390, and z/Architecture Emulator\fPavailable in +\fB/usr/share/doc/hercules/html\fP. +.SH "AUTHOR" +Hercules was created by Roger Bowler and is maintained by +Jay Maynard. Jan Jaeger designed and implemented many of the +advanced features of Hercules, including dynamic +reconfiguration, integrated console, interpretive execution, and +z/Architecture support. +