Description: Include upstream changelog in the package The upstream changelog is not part of the tarball but is available from: https://www.silicondust.com/support/downloads/software-changelog/ Forwarded: not-needed Author: Francois Marier Last-Update: 2023-09-09 --- /dev/null +++ b/ChangeLog @@ -0,0 +1,1496 @@ +Release 20230719: + + • Windows/Mac Installer: + □ Update firmware on HDHR5 and newer models to 20230719. + • HDHomeRun App Mac: + □ Nextgen TV certification release. + +Release 20230713: + + • Windows/Mac Installer: + □ Update firmware to 20230713. + • HDHomeRun App Mac: + □ Fix problem where playback could stall when seeking ATSC 3.0 content. + □ Fix issue where last few seconds of a recording were not displayed. + □ Fix issue where captions were not displayed when within the last 15 + seconds of a recording. + □ Fix issue where rewinding within 15 seconds from the end of a recording + stopped playback. + □ Fix problem where audio started playing 2 seconds after video when + seeking some ATSC 3.0 content. + □ Add parental control support for ATSC 1.0 and ATSC 3.0 (ATSC 3.0 + support requires HDHomeRun firmware 20230713 or newer). + □ Improved ATSC 1.0 and ATSC 3.0 subtitle support. + □ Improved auto-selection of the subtitle track. + □ Fix issue introduced in 20230503 recording from non-ipv6 models or when + operating an ipv4-only network. + □ Nextgen TV certification release candidate. + +Release 20230505: + + • Windows/Mac Installer: + □ Update firmware to 20230505. + • RECORD engine: + □ Fix issue introduced in 20230503 recording from non-ipv6 models or when + operating an ipv4-only network. + +Release 20230503: + + • Windows/Mac Installer: + □ Update firmware to 20230503. + • HDHomeRun Mac App: + □ Fix problem where English audio track was selected when the language + preference was non-English and a matching audio track was available. + □ Fix possible crash in live TV without DVR when seeking after stream + failure. + □ Eliminate higher RAM use when a record engine isn’t present. + □ Improvements to DVB subtitle support. + □ Improvements to diagnostic information. + □ Require MacOS 10.13 or newer (minimum version supported by Apple build + system). + □ Also available from the Apple App Store (does not include record + engine). + +Release 20230323: + + • Windows/Mac Installer: + □ Update firmware to 20230323. + • HDHomeRun Mac App: + □ Support discovering tuner and record engines via IPv6 site-local + multicast when an IPv6 global or site-local IP address is present. + • RECORD engine: + □ Support discovering tuner and record engines via IPv6 site-local + multicast when an IPv6 global or site-local IP address is present. + □ Support detection via IPv6 site-local multicast. + □ Upgrade to 64-bit identifiers for recorded files. + +Release 20230303: + + • Windows/Mac Installer: + □ Update firmware to 20230303. + • HDHomeRun Mac App: + □ Fix possible crash on startup related to config file. + □ Fix possible stall changing/stopping channel. + □ Return to the episodes view automatically after seeking past the end of + a recording. + □ Improvements to fast-forward/rewind. + □ Improvements to skip forward/back while paused. + □ Improvements to subtitle handling. + • RECORD engine: + □ Fix problem where a tuner timeout was incorrectly reported as “DVR + failure” error. + +Release 20221205: + + • Windows/Mac Installer: + □ Update firmware to 20221205. + • RECORD engine: + □ Asustor: Official HDHomeRun RECORD package for Asustor released. + □ Synology: Official HDHomeRun RECORD package for Synology released. + □ FreeBSD: Improve OS version compatibility. + □ Faster automatic failover when recording and multiple HDHomeRun devices + are available. + • libhdhomerun: + □ Fix discover problem where the IP address or interface goes away and + comes back within the lifespan of the disocver object. + □ Add return value to thread_cond_wait_with_timeout to indication cond + trigger vs timeout. + □ Windows: avoid busy waiting when doing a thread_join. + +Release 20221031: + + • Windows/Mac Installer: + □ HDHomeRun Setup: Remove device rescan button on Channels tab to avoid + confusion with channel scanning. + □ Update firmware to 20221031. + • RECORD engine: + □ Fix crash when running on a system where the kernel was compiled + without IPv6 support. + □ Improvements to diagnostic logging. + • libhdhomerun: + □ Windows: fix problem discovering on some virtual interfaces. + □ Fix problem discovering on old Fire TV devices running Fire OS 5. + □ Move IP address classification functions to hdhomerun_sock. + +Release 20221024: + + • HDHomeRun Mac App / libhdhomerun: + □ Fix crash bug in discover handling. + +Release 20221023: + + • Windows/Mac Installer: + □ Windows NAS Installer: Fix problem upgrading/installing record engine + on WDC NAS devices. + □ Windows HDHomeRun Setup: Fix possible DHCP conflict when using Hyper-V + bridged networking. + □ Mac: Fix problem uninstalling record service on MacOS 12.06. + □ Update firmware to 20221023. + • HDHomeRun Mac App: + □ IPv6 support. + □ Upgraded discover support. + □ Native ARM64 support (dual architecture). + • RECORD engine: + □ IPv6 support. + □ Upgraded discover support. + □ Optimized handling of a new DVR request for the same channel from the + same client. + □ Improvements to URL generation so the URLs are valid from .local names + or if port forwarding across private subnets. + □ Fix problem where duplicates could start recording at startup while + existing recordings are still being detected. + □ Fix parsing of URLs without URI after the IP address. + □ Security: Improved IP validation. + □ Mac: Native ARM64 support (dual architecture). + • hdhomerun_config: + □ IPv6 support. + □ New hdhomerun_config discover options -4 (IPv4 only) -6 (IPv6 only) and + –dedupe (only return one IP address for each device). Options must be + after the discover command. For example: hdhomerun_config discover -4 + –dedupe + □ Discover results sorted by device id and ip address priority. + □ Mac: compile native ARM64 support (dual architecture). + • libhdhomerun: + □ IPv6 support. + □ New discover2 API. + □ New multi-type discovery. + □ Mac: compile native ARM64 support (dual architecture). + +Release 20220822: + + • Windows/Mac Installer: + □ Windows: Autodetect 64-bit edition of SageTV. + □ Update firmware to 20220822. + • RECORD engine: + □ Fix problem transitioning to a new live TV file after transitioning + once. + □ Report bps for completed recordings in addition to in-progress + recordings. + □ Remove old Roku-specific playback mode that is no longer used by the + Roku app. + □ Return “416 Requested Range Not Satisfiable” for playback requests + where the range is malformed or invalid. + □ Support more Linux filesystem types. + □ New official package for Asustor NAS products. + □ Drop support for WDC operating sytem OS3 on models that support OS5 + (free OS update from WDC). + □ Drop support for old PowerPC based NAS devices. + • libhdhomerun: + □ Use BCryptGenRandom for random numbers on windows. + +Release 20220203/20220204: + + • Windows/Mac Installer: + □ Windows 10/11: Install latest HDHomeRun app. + □ NAS Install: Add support for WDC EX2100/DL2100/DL4100 running OS5. + □ Update firmware to 20220203. + +Release 20220128: + + • Windows/Mac Installer: + □ Update record engine to 20220128. + □ Update HDHR5/HDVR/HDFX firmware to 20220128. + • RECORD engine: + □ Use https for image URLs. + +Release 20220126: + + • Windows 10/11 App, Mac App: + □ Improvements to audio 5.1 conversion. + □ FHD video quality options. + • Windows 7: + □ Upgrade from TLS 1.0 to TLS 1.2 for web services. + • Windows/Mac Installer: + □ Update record engine to 20220126. + □ Update firmware to 20220125. + • RECORD engine: + □ Upgrade old image links in recordings. + □ Windows: Performance optimization. + +Release 20211212: + + • Windows 10/11 App, Mac App: + □ Fix problem with audio volume level when converting between some + speaker configurations. + +Release 20211210: + + • Windows 10/11 App: + □ ATSC 3.0 audio support. + □ Improved audio multi-channel conversion. + • Mac App: + □ ATSC 3.0 audio support. + □ Improved audio multi-channel conversion. + • Windows Software: + □ Latest Windows 10/11 app. + □ Latest installer/toolchain. + • RECORD: + □ FreeBSD: Target FreeBSD 12.3 and compatible. + +Release 20210624: + + • Windows/Mac Installer: + □ Update record engine to 20210624. + □ Update firmware to 20210624. + • Windows/Mac App: + □ Fix possible video stall or app crash with DVB subtitle rendering. + □ Improved audio channel count transition handling. + □ Improve support for radio/music channels that feature a slideshow. + □ Smoother video playback. + • RECORD: + □ Support multicast/IGMP with multiple network interfaces. + +Release 20210422: + + • Windows/Mac Installer: + □ Update record engine to 20210422. + □ Update firmware to 20210422. + • Windows/Mac App: + □ Fix problem where devices were not detected if they were missing guide + data. + □ Upgrade to audio handling and audio quality. + • RECORD: + □ Windows: Fix problem causing video glitches playing back recordings. + □ Mac: Add new SendfileDisable=1 option for use with complex disk/ + filesystem configurations that do not work reliably with sendfile. + □ WDC: Add support for OS5 on DL2100, DL4100, and EX2100 models of WDC + NAS. + □ Performance improvements. + +Release 20210227: + + • Windows: + □ Update record engine to 20210227. + □ Update HDVR/HHDD firmware to 2021027. + • Mac: + □ Update record engine to 20210227. + □ Update HDVR/HHDD firmware to 2021027. + • RECORD: + □ Fix problem causing high CPU load during playback. + □ Playback performance improvement. + +Release 20210224: + + • Windows: + □ Update record engine to 20210224. + □ Update firmware to 2021024. + • Mac: + □ Update record engine to 20210224. + □ Update firmware to 20210224. + • RECORD: + □ Multi-stream performance improvement. + +Release 20210210a: + + • Windows: + □ HDHomeRun Setup: Support DVB-C on HDHR5-2DT/4DT models. + □ HDHomeRun Setup: Add BDA compatibility mode for Emby. + □ HDHomeRun Config GUI: Improvements to ATSC 3.0 support. + □ NAS Installer: Support latest WDC OS release. + □ NAS Installer: Support latest QNAP OS release. + □ Update firmware to 20210210/20210210a. + • Mac: + □ HDHomeRun App: Improvements to ATSC 3.0 support. + □ HDHomeRun App: Improvements to HEVC video support. + □ HDHomeRun App: Display error message if playback fails due to an audio + configuration problem. + □ Mac Installer: Fix problem causing DVR install to fail on some systems. + □ Update firmware to 20210210/20210210a. + • RECORD: + □ Performance and memory optimization storing recordings to disk. + +Release 20200907: + + • Windows: + □ Upgrade libraries to support latest TLS security requirements (fixes + guide on Windows 7/8, fixes scan for legacy devices). + □ HDHomeRun Setup: Auto-detect JRiver Media Center. + □ Update firmware to 20200907. + □ Drop Vista support. + □ Drop Totalmedia support. + • Mac: + □ Update firmware to 20200907. + • RECORD: + □ Fix possible crash situation. + □ Support discovery via multicast. + □ Update group update id when resume position changes. + +Release 20200521: + + • Windows: + □ Windows BDA: Workaround for NextPVR not working due to PID filter + support. + □ Windows WMP: Fix A/V sync problem when the audio frame duration is + longer than the timestamp step size. + □ Update firmware to 20200521. + • Mac: + □ DVB subtitle support. + □ Fix A/V sync problem when the audio frame duration is longer than the + timestamp step size. + □ Fix problem with audio glitching when using Bluetooth audio on macOS + 10.15. + □ Fix problem where HEVC video could fail to play. + □ Update firmware to 20200521. + • RECORD: + □ Recorded_files defaults to returning the root / top-level-recorded + list. + □ Fixup older image URLs. + • libhdhomerun: + □ Minimum signal strength for scan changed to 35%. + + Release 20200225: + + □ Windows: + ☆ Windows 7/8/8.1: Support MPEG2/AC3 content without DirectShow + codecs or VLC installed. + ☆ Windows 7/8/8.1: Support audio codec changing mid-stream. + ☆ Windows 7/8/8.1: Reduce CPU load playing video content. + ☆ Windows 7/8/8.1: Fix resource leak.. + ☆ Windows Media Player: Support MPEG2/AC3 content without DirectShow + codecs or VLC installed. + ☆ Windows Media Player: Support audio codec changing mid-stream. + ☆ Windows Media Player: Fix resource leak.. + ☆ Update firmware to 20200225. + □ Mac: + ☆ Fix problem where video would stall if the channel was changed + while paused. + ☆ Fix problem where video could stall in rare circumstances when fast + forwarding or changing channel. + ☆ Update firmware to 20200225. + □ RECORD: + ☆ Support playback of recordings on Roku clients. + ☆ Report total disk space in discover.json. + ☆ Automatically remove log files older than 10 days. + ☆ Windows: 64-bit record service. + ☆ FreeNAS/FreeBSD: Fix problem finding HDHomeRun tuners. + + Release 20190621: + + □ Windows: + ☆ Support new SCRIBE and SERVIO models. + ☆ Latest HDHomeRun RECORD service for Windows – see RECORD below. + ☆ Update firmware to 20190621. + □ Mac: + ☆ Support Verizon Fios 4k HEVC channels. + ☆ Support operation with multiple IP addresses on the same network + interface. + ☆ Latest HDHomeRun RECORD service for Mac – see RECORD below. + ☆ Update firmware to 20190621. + □ RECORD: + ☆ Support running multiple record engines acting together as a pool. + ☆ Support operation with multiple IP addresses on the same network + interface. + ☆ Support operation with multiple isolated AutoIP networks. + ☆ Support user configurable limits to the number of concurrent + recordings/viewings. + ☆ Support configuring max concurrent recordings to 0 to disable + recording on a specific record engine. + ☆ Detect SDCardFSfilesystem on Android. + ☆ StorageID in announcements changed to upper-case. + ☆ Robust validation of RecordPath. + ☆ Improvements to GUID handling. + ☆ Fix problem where changes in available channels may not have been + detected. + ☆ Fix problem detecting show boundaries when buffering live TV. + ☆ Fix handling of HTTP requests that immediately disconnect without + waiting for a response. + ☆ Enforce use of HTTP-POST for operations that change configuration. + ☆ Drop unused DisplayGroupID/DisplayGroupName fields. + + Release 20190417: + + □ Windows: + ☆ HDHomeRun Config GUI: Add support for HDHomeRun SERVIO products + (future product). + ☆ Latest HDHomeRun RECORD service for Windows – see RECORD below. + ☆ Update firmware to 20190417. + □ Mac: + ☆ Fix audio pitch issue. + ☆ Fix audio issues experienced on some channels in France. + ☆ Fix problem where seek could sometimes result in video stalling and + /or playback stopping. + ☆ Detect and handle stereo content broadcast as 6 channel audio. + ☆ Improve playback smoothness. + ☆ Update firmware to 20190417. + □ RECORD: + ☆ Fix problem where a request to live-buffer a protected channel was + not rejected. + ☆ Support live TV buffering without internet authorization. + ☆ WDC MyCloud: Support latest MyCloud OS update from WDC. + + Release 20180921: + + □ Windows: + ☆ Fix problem installing Microsoft Visual C++ Redistributable on some + systems. + + Release 20180817: + + □ Windows: + ☆ Support additional audio/video formats in Windows 7/8 app. + ☆ Add option to check for beta releases. + ☆ Update firmware to 20180817. + □ Mac: + ☆ Fix issue where some h.264 channels could show corruption near the + bottom of the screen. + ☆ Fix problem where some channels would flicker between video and a + black screen. + ☆ Fix problem playing audio-only channels. + ☆ Ensure system default audio device is used for audio. + ☆ Add pause/FF/RW support to live TV. + ☆ Update firmware to 20180817. + □ RECORD: + ☆ Fix problem where live TV could report end-of-stream when crossing + to a new time-slot. + ☆ Support starting without an internet connection. + ☆ Mac: Sign record engine to ensure correct operation with security + software expecting signed software. + + Release 20180327: + + □ Windows: + ☆ Update firmware to 20180327. + □ Mac: + ☆ Update firmware to 20180327. + + Release 20171221: + + □ Windows: + ☆ Install the latest Windows 10 app if sideloading in Windows is + enabled. + ☆ Install INF file for DUO/QUATRO models. + ☆ NAS Install: detect WDC MyCloud drives with app support and + auto-install the HDHomeRun DVR app. + □ Mac: + ☆ New HDHomeRun app for Mac (requires OS X 10.11 or newer). + □ Record engine: + ☆ Fix problem recording two sporting events of the same series at the + same time. + ☆ Fix crash triggered by some clients in live TV mode. + ☆ Look for conf file in RecordPath if specified on the command line. + + Release 20170930: + + □ Windows: + ☆ NAS Installer: fix problem configuring the record service to + auto-start on a MyCloud single drive NAS. + ☆ Record service: Faster start when system is rebooted. + ☆ Record service: Improve handling of USB attached hard drives. + ☆ Record service: Detect mounted network shares. + ☆ Update firmware to 20170930. + □ Mac: + ☆ Record service: Support USB attached hard drives. + ☆ Update firmware to 20170930. + □ libhdhomerun: + ☆ Add tw-bcast channel lineup to match hardware. + + Release 20170815: + + □ Windows: + ☆ Improve HDHomeRun Setup handling of the record path configuration. + ☆ Update NAS Installer to support latest Synology firmware. + ☆ Fix problem where installation may fail on some systems with the + latest Microsoft Visual C++ Redistributable already installed. + ☆ Update firmware to 20170815. + □ Mac: + ☆ Prevent screensaver from interrupting video playback. + ☆ Add support for subtitles (USA). + ☆ Add support for secondary audio channels. + ☆ Improvements to video playback. + ☆ Improve default audio track selection. + ☆ Update firmware to 20170815. + + Release 20161119: + + □ Windows: + ☆ Update HDTC-2US firmware to 20161119. + □ Mac: + ☆ Update HDTC-2US firmware to 20161119. + + Release 20161117: + + □ Windows: + ☆ Ensure required Redistributable 2015 Update 3 is installed.. + ☆ Set DVR record engine service to Automatic (Delayed Start) to work + with USB drives. + ☆ Update device firmware to 20161117. + □ Mac: + ☆ Improvements to live TV rate adaption. + ☆ Update device firmware to 20161117 + + Release 20161107/20161107b: + + □ Windows: + ☆ Windows Universal app for Windows 10, Windows 10 Phone, and XBox + One. + ☆ Automatically install the Windows Universal app for Windows 10 if + sideloading is enabled. + ☆ Beta release of HDHomeRun DVR for Windows. + ☆ Fix problem where installation could fail and roll back on Windows + 10. + ☆ Fix detection of VC2015 redist on systems with a newer version + installed. + ☆ Update device firmware to 20161107/20161107b. + □ Mac: + ☆ Major update to HDHomeRun app for OSX. + ☆ Beta release of HDHomeRun DVR for OSX. + ☆ Update device firmware to 20161107/20161107b. + □ libhdhomerun: + ☆ Upgrade hdhomerun_sock API. + ☆ New cond API for thread signaling. + ☆ Windows: New defines for dllexport/dllimport. + ☆ Windows: Improvements to socket performance. + ☆ OSX: Fix sigpipe problem. + ☆ OSX: Improvements to timer handling. + + Release 20150826: + + □ Windows: + ☆ Update device firmware to 20150826. + □ Mac: + ☆ Update device firmware to 20150826. + □ libhdhomerun: + ☆ Expand discovery API to return DeviceAuth and BaseURL. + + Release 20150615: + + □ Windows: + ☆ Update device firmware to 20150615. + □ Mac: + ☆ Update device firmware to 20150615. + + Release 20150604: + + □ Windows: + ☆ HDHomeRun VIEW: Reduce CPU load deinterlacing video. + ☆ HDHomeRun Setup: Fix possible crash in HDHomeRun Setup. + ☆ Update device firmware to 20150604. + □ Mac: + ☆ HDHomeRun VIEW: Reduce CPU load deinterlacing video. + ☆ Update device firmware to 20150604. + □ libhdhomerun: + ☆ Add API to return the model number of a HDHomeRun. + ☆ Report original network ID in scan results. + + Release 20150406: + + □ Windows: + ☆ HDHomeRun VIEW: Avoid problems caused by third-party browser + plugins. + ☆ HDHomeRun VIEW: Fix black/red/blue video problem seen on some + systems. + ☆ HDHomeRun VIEW: Fix SSL crash problem seen on some systems. + ☆ HDHomeRun VIEW: Improve deinterlace quality when VLC is installed. + ☆ HDHomeRun VIEW: Improve OpenGL compatibility. + ☆ HDHomeRun Setup: Remove requirement to enter postcode. + ☆ HDHomeRun Setup: Remove old XBMC support. + ☆ HDHomeRun Setup: Remove old support for remapping US ClearQAM + channels on Vista Media Center. + ☆ HDHomeRun Setup: Auto-detect preview application. + ☆ HDHomeRun Setup: Improvements to UI. + ☆ HDHomeRun Config GUI: Fix crash. + ☆ HDHomeRun Config GUI: Support configuring the IP address and boot + script of TECH models. + □ Mac: + ☆ HDHomeRun VIEW: Support VLC 2.2.0 if installed. + ☆ HDHomeRun VIEW: Improve deinterlace quality when VLC is installed. + ☆ HDHomeRun Config GUI: Support configuring the IP address and boot + script of TECH models. + □ libhdhomerun: + ☆ Remove unused lineup-location get/set functions. + ☆ Fix missing header needed for OS-X. + + Release 20141210: + + □ Windows: + ☆ HDHomeRun VIEW: Video rendering performance improvements. + ☆ HDHomeRun VIEW: Support reduced resolution rendering for low end + tablets. + ☆ HDHomeRun VIEW: Support guide data for HDHR-US and HDHR3-US models. + ☆ HDHomeRun VIEW: Support scrolling the channel list using touch and/ + or mouse. + ☆ HDHomeRun Setup: Automatically configure HDHomeRun VIEW guide data + for HDHR-US/HDHR3-US models. + ☆ HDHomeRun Setup: Improvements to user interface. + ☆ HDHomeRun Config GUI: Fix default-selection of currently playing + program. + ☆ HDHomeRun BDA/WMP: Fix problem where BDA/WMP could interrupt http + stream. + □ libhdhomerun: + ☆ Fix problem where libhdhomerun could interrupt http stream. + + Release 20141201: + + □ Windows: + ☆ HDHomeRun VIEW: Fix crash on systems without OpenGL support. + ☆ HDHomeRun VIEW: Support wider range of graphics cards. + ☆ HDHomeRun VIEW: Improvements to picture quality. + ☆ HDHomeRun Setup: Fix problem generating SageTV and XBMC + configuration files. + + Release 20141124: + + □ Windows: + ☆ HDHomeRun VIEW: New application for viewing live TV. Replaces + QuickTV. + ☆ HDHomeRun Setup: Simplify tuner signal-source selection. + ☆ HDHomeRun Config GUI: Default-select currently playing program. + ☆ HDHomeRun WMP Plugin: Support auto-selecting a tuner when not + specified. + ☆ HDHomeRun WMP Plugin: Fix problem reporting MPEG2 video size. + ☆ Update device firmware to 20141124. + □ Mac: + ☆ HDHomeRun VIEW: New application for viewing live TV. + ☆ Improvements to firmware upgrade process. + ☆ Update device firmware to 20141124. + □ Linux: + ☆ HDHomeRun Cofig GTK: Fix crash on launch when used with glib + + paranoia checks. + ☆ HDHomeRun Cofig GTK: Fix automake problem. + □ libhdhomerun: + ☆ New API for adding all tuners of a device to a device-selector + object. + ☆ Improvements to implementation of random_get32 and getcurrenttime + APIs. + ☆ Fix DNS handling on Android. + + Release 20140604: + + □ Windows: + ☆ HDHomeRun BDA driver: DVB-C fixup feature for use with Windows + Media Center and YouSee Cable. + ☆ HDHomeRun Config GUI: Ensure non-transcode operation on HDTC models + when “native” is selected. + ☆ Update device firmware to 20140604. + □ Mac: + ☆ Support OS-X 10.9. + ☆ Drop PPC support. + ☆ Support compiling under jhbuild. + ☆ Update device firmware to 20140604. + □ libhdhomerun: + ☆ Allow more time for firmware upgrade before reporting timeout. + ☆ Add Mac 64-bit support, drop PPC support. + ☆ Add Japanese channel map. + + Release 20140121: + + □ Windows: + ☆ HDHomeRun Setup: Faster channel scan on HDHR3-CC and HDHR3-4DC + models. + ☆ HDHomeRun Setup: Fixes and improvements for HDHR3-4DC 4-tuner DVB-C + model. + ☆ HDHomeRun Setup: Fix rare problem where it may not be possible to + set the source type. + ☆ HDHomeRun Service: Improvements to handling of resume and IP + change. + ☆ HDHomeRun QuickTV: Fix problem where channel list was not available + after a channel could not be played. + ☆ HDHomeRun Config GUI: Fix problem with program selection when + device already has a selected program. + ☆ HDHomeRun Config GUI: Improvements to webpage rendering. + ☆ HDHomeRun Config GUI: Add support for transcode models. + ☆ Update device firmware to 20140121. + □ Mac: + ☆ Update device firmware to 20140121. + □ libhdhomerun: + ☆ License changed to LGPL 2.1. + ☆ Improvements to socket handling on Mac/Linux. + ☆ Corrections to EU channel map. + ☆ Increase firmware upload chunk size. + + Release 20130328: + + □ Windows: + ☆ HDHomeRun Installer: Fix problem causing installer to fail on + Windows Server 2012. + ☆ HDHomeRun Setup: Fix crash when remap mode was selected for + HDHR3-CC model hardware. + ☆ HDHomeRun Setup: Fix use of HDHR3-CC model in BDA Digital Cable + mode with Vista Media Center. + ☆ HDHomeRun Setup: Limit signal source selection to signal source + types supported by the hardware. + ☆ HDHomeRun Setup: Deprecate GB-PVR support. + ☆ HDHomeRun Config GUI: Fix program list selection issue. + ☆ HDHomeRun QuickTV: Display the channel name and number in the title + and on the taskbar. + ☆ Update device firmware to 20130328. + □ Mac: + ☆ Update device firmware to 20130328. + □ Linux: + ☆ HDHomeRun Config GUI: Fix installation to non-default directory. + + Release 20130117: + + □ Windows: + ☆ HDHomeRun Setup: Detect subscribed channels when CableCARD is + present. + ☆ HDHomeRun Setup: Channelmap selection based on detected hardware – + fixes incorrect error message in some countries. + ☆ HDHomeRun Service: Invoke ehprivjob automatically as needed for + CableCARD operation. + ☆ HDHomeRun QuickTV: Auto play last channel on launch. + ☆ HDHomeRun Config GUI: Add device webpage access. + ☆ HDHomeRun Config GUI: Report network target for tuner. + ☆ HDHomeRun Config GUI: Support browsing devices while playing video. + ☆ Update device firmware to 20130117. + □ Mac: + ☆ Update device firmware to 20130117. + □ libhdhomerun: + ☆ Cleanup and protect sprintf and sscanf functions. + ☆ Ignore local interfaces that are not running when detecting local + IP addresses. + ☆ Channelmap selection based on detected hardware. + ☆ Use time for random numbers if random number resource is not + available. + ☆ Fix memory leak in channelscan handling. + + Release 20120405: + + □ Windows: + ☆ Use same instance of VLC when used as the preview application. + ☆ Improvements to diagnostic logging. + ☆ Update device firmware to 20120405. + □ libhdhomerun: + ☆ Add channel map for cable TV in Korea. + ☆ Improvements to TCP socket handling. + + Release 20120128: + + □ Windows: + ☆ HDHomeRun Setup: Add support for Easy HDTV DVR and NextPVR. + ☆ HDHomeRun Setup: Support unnamed channels from CableCARD. + ☆ HDHomeRun Setup: Generate SageTV SCN files when HDHomeRun Prime is + used without a CableCARD. + ☆ HDHomeRun Setup: Configure VLC to auto deinterlace rather than + always deinterlace when VLC is selected as the viewing application. + ☆ HDHomeRun Config GUI: Configure VLC to auto deinterlace rather than + always deinterlace when VLC is selected as the viewing application. + ☆ HDHomeRun Service: Fix crash/deadlock causing errors. + ☆ HDHomeRun Installer: hdhomerun.inf update to match new PnP-X tags. + ☆ HDHomeRun Installer: Fix issue where registry entry was not updated + when changing install location on x64 systems. + ☆ Update device firmware to 20120128. + □ Mac: + ☆ HDHomeRun Config GUI: Configure VLC to auto deinterlace rather than + always deinterlace. + ☆ Update device firmware to 20120128. + + Release 20111025: + + □ Windows: + ☆ HDHomeRun Setup: Test for UPnP multicast network problems + automatically when detecting HDHomeRun devices. + ☆ HDHomeRun Setup: Allow duplicate CableCARD channel names. + ☆ HDHomeRun Setup: Auto-fix WMC channel limit on cable systems using + 4-digit channel numbers. + ☆ HDHomeRun BDA driver: Fix minor resource leak. + ☆ HDHomeRun WMP plugin: Improve subscription and protection error + messages. + ☆ HDHomeRun Installer: Add firewall rules for the domain firewall + profile. + ☆ Update device firmware to 20111025. + □ Mac: + ☆ Update device firmware to 20111025. + □ libhdhomerun: + ☆ Move multicast join/leave handling to sock API. + + Release 20110925a: + + □ Windows: + ☆ HDHomeRun Setup: Support CC models operating in ClearQAM mode. + ☆ HDHomeRun Setup: DVB-C channel scan improvements. + ☆ HDHomeRun Setup: GUI improvements. + ☆ HDHomeRun QuickTV: Support CC models under XP/Vista. + ☆ HDHomeRun QuickTV: Improvements to standalone installer. + ☆ HDHomeRun WMP Plugin: Support multiple multicast sessions to the + same stream on the same host. + ☆ HDHomeRun Config (GUI): Report OOB information for CC models. + ☆ Update device firmware to 20110925a. + □ Mac: + ☆ Update device firmware to 20110925a. + □ libhdhomerun: + ☆ Add functions for reading OOB status. + ☆ Support multiple multicast sessions to the same stream on the same + host. + + Release 20110830: + + □ Windows: + ☆ HDHomeRun Setup: Avoid unregistering Prime tuners when saving + configuration – fixes problem where WMC may stop playing / + recording TV during the configuration saved process. + ☆ HDHomeRun Setup: Ignore Hauppauge MOCUR tuners to avoid software/ + configuration conflicts. + ☆ CC models: Update firmware 20110830. + □ Mac: + ☆ CC models: Update firmware 20110830. + + Release 20110810: + + □ Windows: + ☆ HDHomeRun Setup: GUI improvements relating to CableCARD support. + ☆ HDHomeRun Setup: Faster firmware upgrade when multiple devices are + detected. + ☆ HDHomeRun Setup: Fix possible crash generating channel files when + HDHomeRun is not accessible. + ☆ HDHomeRun QuickTV/WMP: Present message when channel cannot be + displayed due to CableCARD channel restrictions. + ☆ Installer: Fix double-backslash bug in firewall rules causing video + to be blocked on some systems. + □ libhdhomerun: + ☆ Add vstatus API for use with CableCARD. + + Release 20110801: + + □ Windows: + ☆ Fix install bug from 20110729 release where installation could fail + on 32-bit systems. + □ Mac: + ☆ Fix bug from 20110729 release preventing HDHomeRun units from being + discovered. + □ libhdhomerun: + ☆ Fix bug from 20110729 release preventing HDHomeRun units from being + discovered under Mac OS X. + + Release 20110729: + + □ Windows: + ☆ HDHomeRun Prime support. + ☆ HDHomeRun Setup: Enable DVB-C NIT/SDT injection by default for WMC + with Digital Cable. + ☆ HDHomeRun Setup: GUI improvements. + ☆ HDHomeRun Config GUI: Improvements to TECH constellation plot + display. + ☆ HDHomeRun Config GUI: Fix possible segfault. + ☆ HDHomeRun QuickTV: Add support for tuning by virtual channel for + use with HDHomeRun Prime. + ☆ BDA driver: Add support for DVB-C NIT/SDT injection based on + HDHomeRun Setup channel scan. + ☆ WMP plugin: Add support for tuning by virtual channel for use with + HDHomeRun Prime. + ☆ Installer: Fix problem where the firewall rules did not apply when + the active network profile changed. + ☆ Update to firmware 20110729. + □ Mac: + ☆ Update to firmware 20110729. + □ libhdhomerun: + ☆ Support IP-Tuner format device strings (required for mythtv). + ☆ Improvements to local IP address detection. + ☆ Add vchannel tune APIs for use with HDHomeRun Prime hardware. + ☆ Fix DNS handling under cygwin required for remote debug logging. + ☆ Fix null-pointer dereference in out of memory condition. + + Release 20110323: + + □ Windows: + ☆ Support 1GHz cable TV (HDHR3 US/EU models). + ☆ Run extensive channel scan for DVB-C cable (EU models). + ☆ Improvements to HDHomeRun Config (GUI). + ☆ Upgrade .NET framework. + ☆ Update to firmware 20110323. + □ Mac: + ☆ Improvements to HDHomeRun Config (GTK). + ☆ Update to firmware 20110323. + □ Linux: + ☆ Improvements to HDHomeRun Config (GTK). + □ libhdhomerun: + ☆ Upgrade channel maps (updated DVB-T tables, support for 1GHz cable, + support for AU cable). + ☆ Scan 1MHz steps for EU and AU cable TV. + ☆ Report tuner count in discovery result. + ☆ Fix compile/link errors under Solaris. + + Release 20100828: + + □ Windows: HDHomeRun Setup / drivers: + ☆ Automatically generate channel Playlist for Windows Media Player. + ☆ Add support for remapping DVB-C channels to DVB-T for use with + Windows Media Center. + ☆ Add support for user-specified symbol rates for DVBC. + ☆ Add support for application For The Record. + ☆ Generate XBMC files if XBMC is selected as the application, even if + XBMC is not detected. + ☆ Make “Remove channels not found in scan” option persistent. + ☆ Fix SageTV SCN file generation for clean v7 installs. + ☆ Fix problem where tuner driver was not de-registered when tuner + disabled and removed. + ☆ Update postcode validation rules. + ☆ Updated beta release of the WMC Sync utility. + ☆ Update to firmware 20100828. + □ Windows: HDHomeRun QuickTV / Windows Media Player: + ☆ Add support for MPEG1 video in QuickTV/Windows Media Player. + ☆ Disable codec-missing messages incorrectly triggered when rapidly + changing channels. + □ Windows: HDHomeRun Config GUI: + ☆ Add support for TECH SNR numbers with higher precision than 1dB. + ☆ Improvements to channel selection. + ☆ Detect channelmap list from device. + ☆ Fix problem where HDHomeRun Config GUI could cause a tuner to lose + program selection if the channel was tuned by a different + application while HDHomeRun Config GUI was running. + ☆ Fix application crash if HDHR was unplugged while user has program + list showing for selection. + □ Mac: + ☆ Update to firmware 20100828. + □ libhdhomerun: + ☆ Fix missing fclose in the hdhomerun_config upgrade code. + ☆ Fix random lockkey generation. + ☆ Fix const warnings. + + Release 20100213: + + □ Windows: + ☆ Add a7qam256-6100 a7qam128-6100 a7qam64-6100 modulation options for + DVB-C. + ☆ Update to firmware 20100213. + □ Mac: + ☆ Update to firmware 20100213. + □ libhdhomerun: + ☆ Fix socket issue under cygwin. + + Release 20100121: + + □ Windows: + ☆ Fix situation where Windows Media Center could deadlock resulting + in one the following messages: “A serious error has occurred”, + “Please wait. Searching for tuners”, “All tuners are in use”. + ☆ Fix generation of XBMC channel files when one or more channel names + are invalid. + ☆ Fix channel sorting in QuickTV. + ☆ Add support for separate groups of tuners with the same source + class. + ☆ Add GUI option to disable Windows 7 Windows Media Center background + channel scan. + ☆ Automatically locate BdaSup.sys when reinstalling BDA components. + ☆ HDHR-US: Add advanced option for configuring VCT filtering/ + injection with US-QAM. + ☆ HDHR-EU: Add support for configuring DVB-C auto-modulation + detection. + ☆ HDHR-EU: Detect E-AC3 audio. + ☆ Update to firmware 20100121. + □ Mac: + ☆ Update to firmware 20100121. + □ libhdhomerun: + ☆ Upgrade socket handling. + ☆ Upgrade msleep handling. + ☆ hdhomerun_config: prevent sleep on Windows machines during save + operation. + + Release 20091024: + + □ Windows: Application support: + ☆ Add support for J River Media Center. + ☆ Support DVB-C in MediaPortal. + □ Windows: HDHomeRun Setup: + ☆ Enable TotalMedia download for HDHR-EU customers. + ☆ Check for updates when run. + ☆ Update to firmware 20091024. + □ Windows: HDHomeRun QuickTV: + ☆ Add option to allow multiple QuickTV windows to be opened. + ☆ Add option to run QuickTV as a stay-on-top window. + ☆ Add support for channel-list files for listing channels. + ☆ Add multicast video support (commercial use). + ☆ Detect and report missing codecs. + ☆ Fix window size problem on netbooks. + □ Windows: HDHomeRun BDA driver: + ☆ Support Win7 WMC operation without registry information. + ☆ Use channelmap based channel bandwidth for DVB-T/DVB-C if + application fails to set the channel bandwidth. + □ Windows: HDHomeRun WMP plugin: + ☆ Add multicast video support (commercial use). + □ Windows: HDHomeRun Installer: + ☆ Associate “.qtv” channel-list files with HDHomeRun QuickTV. + □ Mac: Installer: + ☆ Update to firmware 20091024. + □ HDHomeRun Config (GTK): + ☆ Add Ctrl-D hotkey to enable sending diagnostic information to + support. + ☆ Stop stream on VLC exit. + □ libhdhomerun: + ☆ Expand hdhomerun_discover API to allow socket reuse. + ☆ Add multicast video support. + ☆ Fix socket leak on non-Windows platforms. + ☆ Fix possible timing inaccuracy if the system time changes. + ☆ Remove use of select() causing problems with greater than 1024 + sockets. + ☆ Improvements to debug logging. + + Release 20090830: + + □ Windows: HDHomeRun Setup: + ☆ Update to firmware 20090830. + □ Windows: HDHomeRun QuickTV: + ☆ Add XP64 compatibility. + □ Mac: Installer: + ☆ Update to firmware 20090830. + + Release 20090806: + + □ Windows: Application support: + ☆ GBPVR: Automatically add HDHomeRun tuners to the GBPVR bda.ini + file. + ☆ GBPVR: Automatically add digital cable channels that contain + unencrypted programs to GBPVR qam.ini file. + ☆ MediaPortal: Filter digital cable channels to only report channels + that contain unencrypted programs. + ☆ SageTV: Improvements to the handling of SageTV when user has + disabled UAC. + ☆ XBMC: Update generated files to support second tuner. + □ Windows: HDHomeRun Setup: + ☆ Faster channel scan for US-cable. + ☆ Improvements to lineup server interaction to improve channel + results. + ☆ Improvements to guide name/number conflict handling. + ☆ Workaround a Windows bug causing some DVB-T channels not to work in + MCE 2005 and WMC TV-Pack. + ☆ Fix problem where multiple VLC notification icons were left by the + clock. + ☆ Reuse same instance of the preview application when possible. + ☆ Fix in-use errors reported on some systems. + ☆ Add option for Canada WMC TV Pack if WMC TV Pack is detected. + ☆ Update to firmware 20090806. + ☆ GUI improvements. + □ Windows: HDHomeRun QuickTV: + ☆ New HDHomeRun QuickTV application for viewing live TV. + □ Windows: HDHomeRun Config (GUI) + ☆ Avoid changing the selected tuner on rescan. + ☆ Reuse same instance of the preview application when possible. + ☆ Fix problem where multiple VLC notification icons were left by the + clock. + ☆ Fix in-use errors reported on some systems. + ☆ GUI improvements. + □ Windows BDA Driver: + ☆ Fix graph reference count leak. + ☆ Fix bug where the signal strength may be misreported in remap mode + for a non/existant channel. + □ Windows Media Player Plugin: + ☆ Support additional third party h.264 codecs. + ☆ Display error message if a codec is missing that is needed to play + the channel. + ☆ Add dynamic tuner allocation support. + □ Mac: Installer: + ☆ Update to firmware 20090806. + □ libhdhomerun: + ☆ Faster channel scan for US-cable. + ☆ Track TSID during channelscan for use with channel matching. + ☆ Resource-lock tuner during hdhomerun_config channel scan. + ☆ Skip discover of device ID when device ID is known. + ☆ Fix min/max conflict compiling with MythTV. + ☆ Fix possible early return from msleep. + ☆ Start streaming API updated to fall back to UDP if firmware does + not support RTP. + ☆ Separate out debug disable from debug close APIs. + ☆ Speed up discovery process. + ☆ Add dynamic tuner allocation support to libhdhomerun. + + Release 20090415: + + □ Windows: HDHomeRun Setup: + ☆ Fix case where conflicting channel names were not detected and + prevented. + ☆ Fix problem where the tuner configuration was not remembered if set + to “Digital Cable” combined with “Other: ATSC/QAM” or “Other: DVBT/ + DVBC”. + ☆ Update to firmware 20090415. + □ Windows: BDA driver: + ☆ Fix problem where tuners may be unavailable if a DVR application + terminates unexpectedly and fails to release a tuner. + + Release 20090411: + + □ Windows: Application support: + ☆ SageTV: Improvements to generation of SageTV SCN files for Digital + Cable. + ☆ SageTV: Do not generate SCN files for Digital Antenna (ATSC/DVBT). + ☆ SageTV: Fix problem where old SageTV SCN files were not deleted. + ☆ LiquidTV: Restart LiquidTV service if BDA configuration changes. + □ Windows: HDHomeRun Setup: + ☆ Add support for single integer virtual channel numbers. + ☆ Detect and prevent conflicting channel information. + ☆ Update to firmware 20090411. + ☆ GUI improvements. + □ Windows: BDA driver: + ☆ Improvements to debug logging. + □ Mac: Installer: + ☆ Detect location of VLC. + ☆ Update to firmware 20090411. + ☆ Fix problem where firmware updater may fail to upgrade if unit is + running a firmware release from 2007. + □ libhdhomerun: + ☆ Add support for single integer virtual channel numbers. + ☆ Add lockkey support to hdhomerun_config. + ☆ Cleaner exit handling for hdhomerun_config save command. + + Release 20090305a: + + □ Windows: Application support: + ☆ Add application setting to support future LiquidTV releases with + HDHomeRun support. + ☆ Add firewall exception for BeyondTV Recorder service if detected. + □ Windows: HDHomeRun Setup: + ☆ Fix possible situation where driver registry settings were not + upgraded when installing newer HDHomeRun software. + ☆ Update to firmware 20090305. + □ Windows: BDA driver: + ☆ Auto-detect network provider compatibility mode if needed (replaces + registry configuration). + ☆ Optimize auto-modulation detection based on modulation type + requested. + ☆ Improvements to debug logging. + □ Windows: WMP plugin: + ☆ Support DVBT AAC/LATM audio for use in New Zealand. + □ Mac: Installer: + ☆ Add backwards compatibility support for OS 10.4. + ☆ Update to firmware 20090305. + □ Linux/Mac: HDHomeRun Config (GUI) + ☆ Support DVBT channel maps. + □ libhdhomerun: + ☆ Report overflow errors when using the hdhomerun_config save + command. + ☆ Fix loop delay handling in the hdhomerun_config save command that + was causing overflow errors on some systems. + + Release 20090215: + + □ Windows: Installer: + ☆ Deprecate HDHomeRun Manager application. + ☆ Store HDHomeRun software version string in registry. + □ Windows: Application support: + ☆ Windows Media Player plugin for streaming direclty to WMP. + ☆ Add workaround to support ATSC OTA in Canada with WMC TV Pack. + ☆ Disable WMCTVP HRC workaround if Win7 WMC is detected. + ☆ Fix detection of XBMC version on 64-bit Windows. + ☆ Fix detection of MSNP.ax when Vista SP2 is installed. + ☆ Depreciate support for SageTV 6.3.x and older. + □ Windows: HDHomeRun Setup: + ☆ Support channel preview using Windows Media Player. + ☆ Add ability to override resource lock when previewing channels. + ☆ Update to firmware 20090215. + □ Windows: HDHomeRun Config (GUI): + ☆ Support channel preview using Windows Media Player. + ☆ Add ability to override resource lock when previewing channels. + ☆ Add support for TECH hardware. + □ Windows: BDA driver: + ☆ Improve buffer handling and reduce memory footprint. + ☆ Improvements to debug logging. + □ libhdhomerun: + ☆ Add support for executing startup script on TECH hardware. + + Release 20081231: + + □ Windows: Application support: + ☆ Generate channel files for XBMC. + □ Windows: HDHomeRun Setup: + ☆ Do not force the specific deinterlace mode when launching VLC. + ☆ Update to firmware 20081231. + □ Windows: HDHomeRun Config (GUI): + ☆ Do not force the specific deinterlace mode when launching VLC. + □ Windows BDA driver: + ☆ Filter out blank padding when application does not control + filtering. + ☆ Fix rare error reading lineup configuration file. + □ Linux: HDHomeRun Config (GUI): + ☆ Do not force the specific deinterlace mode when launching VLC. + + Release 20081222: + + □ Windows: HDHomeRun Setup: + ☆ Improvements to location/postcode validation. + ☆ Fix bug causing blank SageTV SCN files when used with a HRC-based + cable system. + ☆ Fix bug causing SageTV FRQ files to be incorrectly deleted in some + situations. + ☆ Allow window to be resized. + ☆ Update to firmware 20081222. + □ All platforms: libhdhomerun: + ☆ Adjust SNQ color thresholds to better match hardware scale. + ☆ Replace use of strcpy with strncpy. + + Release 20081213: + + □ Windows: Application support: + ☆ Hide encrypted-only channels from TotalMedia – reduces numbering + conflicts and scan time. + □ Windows: hdhomerun_config: + ☆ Fix problem where hdhomerun_config would cause batch file + processing to fail. + □ OSX: HDHomeRun Utilities: + ☆ Automatically download and install required framework if not + installed. + ☆ Fix possible lockup in HDHomeRun Config (GUI) when VLC quits. + □ Linux: HDHomeRun Config (GUI): + ☆ Fix ‘make install’. + + Release 20081209: + + □ Windows: Application support: + ☆ Detect Windows 7 Media Center. + ☆ Enable PID filter by default for GB-PVR (requires GB-PVR 3.1.7). + □ Windows: HDHomeRun Setup: + ☆ GUI layout changes to improve flow. + ☆ Expand list of user-selectable countries for location setting. + ☆ Country + signal source configuration used to set channelmap in + devices. + ☆ Default to TotalMedia if no other apps are detected so download + button is displayed. + ☆ Add support for channel names using Unicode character sets. + ☆ Fix bug causing channel names containing a space to be truncated. + ☆ Detect if tuner is in use before running a channel scan or + launching VLC. + ☆ Scan full HRC/Cable channel map for use on cable systems with mixed + HRC/Cable frequencies. + ☆ Enable deinterlace support in VLC when launched via HDHomeRun + Setup. + ☆ Fix possible exception in a situation where installing the Windows + BDA components failed. + ☆ Update to firmware 20081209. + ☆ Add DVB-T support. + □ Windows: HDHomeRun Config (GUI): + ☆ Add support for channel names using Unicode character sets. + ☆ Detect if tuner is in use before running launching VLC. + ☆ Enable deinterlace support in VLC when launched via HDHomeRun + Config (GUI). + ☆ Add DVB-T support. + □ Windows: BDA driver: + ☆ Add dynamic tuner allocation support to allow tuners to be + automatically allocated between computers as needed. + ☆ Update USCableAuto mode to support cable systems that use a mixture + of cable and HRC frequencies. + ☆ Optimize handling of PID filter updates within a transaction. + ☆ Support changing channel outside of a transaction. + ☆ Clear program filter on channel change to prevent stale + configuration from being applied if the application does not update + program filter. + ☆ Fix error detection and handling for out of range frequency request + (>2GHz). + ☆ Add DVB-T support. + □ OSX: HDHomeRun Config (GUI) + ☆ New cross-platform HDHomeRun Config GUI utility. + □ Linux: HDHomeRun Config (GUI) + ☆ New cross-platform HDHomeRun Config GUI utility. + □ All platforms: hdhomerun_config: + ☆ Configure shell in windows to display UTF-8 strings. + ☆ Channel scan reads channelmap from device and scans channels from + this channelmap (and any other associated channelmaps). + □ All platforms: libhdhomerun: + ☆ Add tuner resource lock support. + ☆ Channel scan order reversed to scan highest frequency first. + ☆ Add frequency tables for additional countries. + ☆ Change channel_list API to use a channel_list object rather than + the channelmap bitmask used previously. Channel list objects can be + created for any channelmap or list of channelmaps by name. + ☆ Deprecate API to get channelmaps by model. Application should read + the current channelmap from the device or ask the user which + channelmap to use. + ☆ Increase max length of a channel name (needed for DVB-T). + ☆ Change green (good) signal color to a lighter shade of green. + ☆ Add extern-C statements to channel and channelscan headers. + ☆ Fix bug causing channel names containing a space to be truncated. + ☆ Fix communication problem triggered by selecting a HDHR unit by IP + address when the host has multiple network interfaces. + ☆ Fix memory warning where buffer was not zeroed before use. + ☆ Add DVB-T support. + + Release 20081002: + + □ Windows: Application support: + ☆ Publish 8VSB+QAM support for WMCTVP regardless of input type. + ☆ Convert us-cable channel request into us-hrc channel request for + WMCTVP and TotalMedia when used on a HRC based cable system – fixes + problem where WMCTVP may not detect ClearQAM channels on an HRC + based cable system. + □ Windows: HDHomeRun Setup: + ☆ Add support for VLC 0.9.2. + ☆ Update to firmware 20081002 + □ Windows: HDHomeRun Config (GUI): + ☆ Fix bug causing HDHomeRun Config (GUI) to not terminate correctly + in some situations with VLC running. + □ Windows: BDA driver: + ☆ Return IHDHomeRun_ProgramFilter as supported when enumerating + supported interfaces. + ☆ Fix possible start up deadlock in BDA driver. + □ Windows: Installer: + ☆ Fix bug in updater causing version file to be pulled multiple + times. + ☆ Check SW20-S050-15 power adapter replacement database and display + webpage if appropriate. + □ libhdhomerun: + ☆ Improve discover support for UNIX platforms. + ☆ Add support to hdhomerun_config for reading set value from stdin. + ☆ Fix potential get/set buffer overflow. + ☆ Fix null-termination error when PID filter is set to block-all. + + Release 20080727: + + □ Windows: Application support: + ☆ VMC: Fix miss-detection of a Microsoft limited distribution release + version of MSNP.ax that resulted in a no-signal error in VMC on + some systems. + ☆ SageTV: include channels that do not have guide numbers in the SCN + channel import file. + □ Windows: HDHomeRun Setup: + ☆ Fix bug in channel editor where it may fail to allocate a remap + number when a channel is enabled that was previously disabled. + ☆ If a remap number is edited and changed to a number already in use + then generate a new remap number for the other channel (rather than + generating a new remap number for the channel that was just + edited). + □ libhdhomerun: + ☆ Fix segfault in hdhomerun_config when a logged channel scan is run + under 64-bit Linux. + + Release 20080723: + + □ Windows: Application support: + ☆ Add support for Windows Media Center TV Pack (WMCTVP). + ☆ Auto-detect Media Center version (MCE 2005, VMC, WMCTVP). + ☆ Generate channel import information for MCE 2005 in ATSC mode + (forces MCE 2005 to detect ATSC sub-channels). + ☆ Add support for SageTV 6.4 native QAM (SageTV version + auto-detected). + ☆ Add support for BeyondTV 4.9 native QAM (BeyondTV version + auto-detected). + ☆ Add application option for GB-PVR. + ☆ Add application option for MediaPortal. + ☆ Add application option for generic ATSC/QAM applications. + ☆ Add application option for generic DVBT applications. + □ Windows: HDHomeRun Setup: + ☆ Add support for DVB-T hardware. + ☆ Add ability to log debug information when streaming to VLC. + ☆ Add native QAM support to channel editor. + ☆ Halve the cable channel scan time by detecting HRC vs Cable/IRC. + ☆ Track virtual channel numbers in the channel editor in Antenna and + native QAM modes. + ☆ Clean up editing of remap numbers in the channel editor + (double-click on remap entry to edit). + ☆ Fix column sorting in the channel editor. + ☆ Fix problem where atscprefs.xml file may not be generated when a + channel name is blank. + ☆ Generate atscprefs.xml file for MCE 2005 in ATSC mode so MCE + detects all ATSC sub-channels. + ☆ Generate SageTV scn files so SageTV can import channel information. + ☆ Update to firmware 20080723. + ☆ General UI improvements. + □ Windows: HDHomeRun Manager: + ☆ Fix glitch where HDHomeRun Manager flashes up a window when Windows + starts. + ☆ New HDHomeRun Manager notification icon and menu. + □ Windows: HDHomeRun Config (GUI): + ☆ Add support for DVB-T hardware. + ☆ Show modulation type in HDHomeRun Config (GUI). + ☆ Add ability to log debug information when streaming to VLC. + □ Windows: BDA driver: + ☆ Add support for DVB-T hardware. + ☆ Add support for BDA AutoDemodulate API. + ☆ Add API to allow filtering by program number. + □ Windows: Installer: + ☆ Fix problem where software updater may not be installed correctly + when upgrading. + □ libhdhomerun: + ☆ New API for channel scan. + ☆ Add model detection and model helper functions. + ☆ Use RTP by default so network loss can be detected. + ☆ Add define to enable exporting functions when building a Windows + DLL. + ☆ Report reception/network errors when using the hdhomerun_config + save command. + ☆ Increase the minimum signal threshold to approx -83dBuV. + + Release 20080430: + + □ Windows: Fix access violation error seen on some systems. + □ Windows/Mac/Linux: Fix upgrade communication error seen on some + systems. + □ libhdhomerun: Fix uninitialized pointer causing access violation error + in some situations. + □ libhdhomerun: Extend maximum allowed wait time for upgrade upload + complete message to allow for actual time required to upload. + + Release 20080427: + + □ Windows: Add support for downloading TotalMedia (including license + key). + □ Windows: Fix multi-threaded reconnect error (most commonly seen when PC + resumes from sleep). + □ Windows: Fix upgrade error handling. + □ Windows: Fix error saving graph in GraphEdit. + □ Windows: Update to firmware 20080427. + □ libhdhomerun: Check upgrade upload result reported by HDHomeRun (fixes + communication state problem if upload failed). + □ libhdhomerun: Improvements to control retry/reconnect code. + □ libhdhomerun: Add pkt object to simplify packet handling. + □ libhdhomerun: Add UK/NZ frequencies to channel map API. + □ libhdhomerun: Add API for detecting channel maps based on HDHomeRun + model (ATSC vs DVBT). + □ libhdhomerun: Detect MSVS Windows compile without additional user + define. + □ libhdhomerun: Add support for compiling under Solaris. + + Release 20080307: + + □ Windows: Fix possible no-signal issue in BDA driver. + + Release 20080305: + + □ Windows: Fix possible no-signal issues when using OTA and a channel + scan has not been run. + □ Windows: Fix DLL and install errors on Windows 2000. + □ Windows: Fix problem causing MCE to report “tuner error” on some + systems after resuming from sleep. + □ Windows: Detect changes to IP configuration and enable/disable + direct-connect as appropriate. + □ Windows: Support frequency adjustment to HRC channel numbering for + applications with native QAM support. + □ Windows: Update to firmware 20080305. + + Release 20080212: + + □ Windows: Combined 32-bit/64-bit installer that auto-detects OS type. + □ Windows: Suppress known non-digital or disabled channels to speed up + channel scan in third-party DVR applications. + □ Windows: Auto-detect DVR application on first install. + □ Windows: Automatically close HDHomeRun utilities when installing new + release. + □ Windows: Automatically stop MCE and SageTV services as required when + updating BDA drivers. + □ Windows: Restart MCE scheduling service if lineup ID is changed. + □ Windows: Eliminate multiple requests for Admin approval during Vista + install. + □ Windows: Eliminate need to reboot PC after upgrading in most + situations. + □ Windows: Fix possible firewall installation errors when installing on a + PC running SageTV. + □ Windows: Fix uninstall problem possible on some systems. + □ Windows: Detect and re-register Windows components needed by MCE if + they are de-registered by uninstalling SageTV. + □ Windows: Fix cascade of errors reported when a HDHomeRun unit is + unplugged while using HDHomeRun Config (GUI). + □ Windows: Update to firmware 20080212. + □ libhdhomerun: Change status color enumeration to ARGB format. + + Release 20080104: + + □ Windows: Support different sources for each tuner (when supported by + DVR application). Not supported by MCE. + □ Windows: Configure driver for feature-set supported by DVR application + specified. + □ Windows: Support PID filtering in MCE 2005 for reduced network + bandwidth in ATSC mode. + □ Windows: Improved UI handling for installing drivers. + □ Windows: Support configuration without lineup server if desired. + □ Windows: Faster channel scan by using Digital Antenna/Digital Cable + selection to select channels to scan. + □ Windows: Indicate invalid/conflicting custom guide numbers. + □ Windows: Fix debug handling when using 32-bit application on 64-bit + install. + □ Windows: Fix vcredist issue on Vista. + □ Windows: Fix rare miss-trigger of 4002 error on some systems. + □ Windows: Update to firmware 20080104. + □ libhdhomerun: Add APIs for obtaining number of channels that match a + set of channel maps. + □ libhdhomerun: Enhance channel scan APIs to use a given set of channel + maps. + + Release 20071209: + + □ CD production release.