# Makefile.in generated automatically by automake 1.4-p2 from Makefile.am

# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

#
#  Makefile.am
#
#  $Id: Makefile.am,v 1.2 2001/06/11 14:29:42 source Exp $
#
#  (C) 2001 OpenLink Software Inc.
#
#  This library is free software; you can redistribute it and/or
#  modify it under the terms of the GNU Library General Public
#  License as published by the Free Software Foundation; either
#  version 2 of the License, or (at your option) any later version.
#
#  This library is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
#  Library General Public License for more details.
#
#  You should have received a copy of the GNU Library General Public
#  License along with this library; if not, write to the Free
#  Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.


SHELL = @SHELL@

srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@

bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include

DESTDIR =

pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@

top_builddir = ..

ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@

INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
transform = @program_transform_name@

NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_alias = @host_alias@
host_triplet = @host@
AS = @AS@
CC = @CC@
CPP = @CPP@
DLLTOOL = @DLLTOOL@
ECHO = @ECHO@
EXEEXT = @EXEEXT@
GTK_CFLAGS = @GTK_CFLAGS@
GTK_CONFIG = @GTK_CONFIG@
GTK_LIBS = @GTK_LIBS@
LIBADD_DL = @LIBADD_DL@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
RANLIB = @RANLIB@
STRIP = @STRIP@
VERSION = @VERSION@
inidir = @inidir@
lib_version = @lib_version@
odbcmode = @odbcmode@

@GUI_TRUE@SUBDIRS = gtk

@GUI_TRUE@lib_LTLIBRARIES = libdrvproxy.la
@GTK_TRUE@INCLUDES = -I$(top_srcdir)/include -I$(top_srcdir)/iodbc -I$(top_srcdir)/iodbcinst 	@GTK_CFLAGS@
@GTK_FALSE@INCLUDES = -I$(top_srcdir)/include -I$(top_srcdir)/iodbc -I$(top_srcdir)/iodbcinst
@GTK_TRUE@CFLAGS = @CFLAGS@ -D__GTK__

libdrvproxy_la_LDFLAGS = -version-info @lib_version@ 			  -export-symbols $(srcdir)/drvproxy.exp

@GTK_TRUE@libdrvproxy_la_LIBADD = $(LIBADD_DL) ../iodbc/dlf.lo ../drvproxy/gtk/confirm.lo ../drvproxy/gtk/gensetup.lo ../iodbcinst/libiodbcinst.la ../iodbcadm/libiodbcadm.la @GTK_LIBS@
@GTK_FALSE@libdrvproxy_la_LIBADD = $(LIBADD_DL) ../iodbc/dlf.lo ../iodbcinst/libiodbcinst.la ../iodbcadm/libiodbcadm.la

libdrvproxy_la_SOURCES =  	ConfigDSN.c 	ConfigDriver.c 	Info.c 	drvconn.c 	login.c


noinst_HEADERS = gui.h

EXTRA_DIST = drvproxy.exp
mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs
CONFIG_HEADER = ../include/config.h
CONFIG_CLEAN_FILES = 
LTLIBRARIES =  $(lib_LTLIBRARIES)


DEFS = @DEFS@ -I. -I$(srcdir) -I../include
CPPFLAGS = @CPPFLAGS@
LDFLAGS = @LDFLAGS@
LIBS = @LIBS@
@GTK_FALSE@libdrvproxy_la_DEPENDENCIES =  ../iodbc/dlf.lo \
@GTK_FALSE@../iodbcinst/libiodbcinst.la ../iodbcadm/libiodbcadm.la
@GTK_TRUE@libdrvproxy_la_DEPENDENCIES =  ../iodbc/dlf.lo \
@GTK_TRUE@../drvproxy/gtk/confirm.lo ../drvproxy/gtk/gensetup.lo \
@GTK_TRUE@../iodbcinst/libiodbcinst.la ../iodbcadm/libiodbcadm.la
libdrvproxy_la_OBJECTS =  ConfigDSN.lo ConfigDriver.lo Info.lo \
drvconn.lo login.lo
COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
HEADERS =  $(noinst_HEADERS)

DIST_COMMON =  Makefile.am Makefile.in


DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)

TAR = gtar
GZIP_ENV = --best
DIST_SUBDIRS =  gtk
SOURCES = $(libdrvproxy_la_SOURCES)
OBJECTS = $(libdrvproxy_la_OBJECTS)

all: all-redirect
.SUFFIXES:
.SUFFIXES: .S .c .lo .o .obj .s
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
	cd $(top_srcdir) && $(AUTOMAKE) --foreign --include-deps drvproxy/Makefile

Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) \
	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status


mostlyclean-libLTLIBRARIES:

clean-libLTLIBRARIES:
	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)

distclean-libLTLIBRARIES:

maintainer-clean-libLTLIBRARIES:

install-libLTLIBRARIES: $(lib_LTLIBRARIES)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(libdir)
	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
	  if test -f $$p; then \
	    echo "$(LIBTOOL)  --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p"; \
	    $(LIBTOOL)  --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p; \
	  else :; fi; \
	done

uninstall-libLTLIBRARIES:
	@$(NORMAL_UNINSTALL)
	list='$(lib_LTLIBRARIES)'; for p in $$list; do \
	  $(LIBTOOL)  --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \
	done

.c.o:
	$(COMPILE) -c $<

# FIXME: We should only use cygpath when building on Windows,
# and only if it is available.
.c.obj:
	$(COMPILE) -c `cygpath -w $<`

.s.o:
	$(COMPILE) -c $<

.S.o:
	$(COMPILE) -c $<

mostlyclean-compile:
	-rm -f *.o core *.core
	-rm -f *.$(OBJEXT)

clean-compile:

distclean-compile:
	-rm -f *.tab.c

maintainer-clean-compile:

.c.lo:
	$(LIBTOOL) --mode=compile $(COMPILE) -c $<

.s.lo:
	$(LIBTOOL) --mode=compile $(COMPILE) -c $<

.S.lo:
	$(LIBTOOL) --mode=compile $(COMPILE) -c $<

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:

maintainer-clean-libtool:

libdrvproxy.la: $(libdrvproxy_la_OBJECTS) $(libdrvproxy_la_DEPENDENCIES)
	$(LINK) -rpath $(libdir) $(libdrvproxy_la_LDFLAGS) $(libdrvproxy_la_OBJECTS) $(libdrvproxy_la_LIBADD) $(LIBS)

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.

@SET_MAKE@

all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive  \
check-recursive installcheck-recursive info-recursive dvi-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
	  rev="$$subdir $$rev"; \
	  test "$$subdir" = "." && dot_seen=yes; \
	done; \
	test "$$dot_seen" = "no" && rev=". $$rev"; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP)
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	here=`pwd` && cd $(srcdir) \
	  && mkid -f$$here/ID $$unique $(LISP)

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
   if test "$$subdir" = .; then :; else \
	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
   fi; \
	done; \
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)

mostlyclean-tags:

clean-tags:

distclean-tags:
	-rm -f TAGS ID

maintainer-clean-tags:

distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)

subdir = drvproxy

distdir: $(DISTFILES)
	@for file in $(DISTFILES); do \
	  d=$(srcdir); \
	  if test -d $$d/$$file; then \
	    cp -pr $$d/$$file $(distdir)/$$file; \
	  else \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file || :; \
	  fi; \
	done
	for subdir in $(DIST_SUBDIRS); do \
	  if test "$$subdir" = .; then :; else \
	    test -d $(distdir)/$$subdir \
	    || mkdir $(distdir)/$$subdir \
	    || exit 1; \
	    chmod 777 $(distdir)/$$subdir; \
	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \
	      || exit 1; \
	  fi; \
	done
ConfigDriver.lo ConfigDriver.o : ConfigDriver.c ../include/config.h \
	../include/iodbcinst.h ../include/sql.h ../include/sqltypes.h \
	../include/sqlext.h ../iodbcinst/iodbc_error.h gui.h gtk/gui.h
ConfigDSN.lo ConfigDSN.o : ConfigDSN.c ../include/config.h \
	../include/iodbcinst.h ../include/sql.h ../include/sqltypes.h \
	../include/sqlext.h ../iodbcinst/iodbc_error.h gui.h gtk/gui.h
drvconn.lo drvconn.o : drvconn.c gui.h ../include/config.h \
	../include/iodbcinst.h ../include/sql.h ../include/sqltypes.h \
	../include/sqlext.h gtk/gui.h ../iodbc/herr.h ../iodbc/dlproc.h \
	../iodbc/dlf.h ../iodbc/iodbc.h
Info.lo Info.o : Info.c ../include/config.h
login.lo login.o : login.c ../include/config.h ../include/iodbcinst.h \
	../include/sql.h ../include/sqltypes.h ../include/sqlext.h \
	../iodbcinst/iodbc_error.h gui.h gtk/gui.h

info-am:
info: info-recursive
dvi-am:
dvi: dvi-recursive
check-am: all-am
check: check-recursive
installcheck-am:
installcheck: installcheck-recursive
install-exec-am: install-libLTLIBRARIES
install-exec: install-exec-recursive

install-data-am:
install-data: install-data-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am: uninstall-libLTLIBRARIES
uninstall: uninstall-recursive
all-am: Makefile $(LTLIBRARIES) $(HEADERS)
all-redirect: all-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:
	$(mkinstalldirs)  $(DESTDIR)$(libdir)


mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log stamp-h stamp-h[0-9]*

maintainer-clean-generic:
mostlyclean-am:  mostlyclean-libLTLIBRARIES mostlyclean-compile \
		mostlyclean-libtool mostlyclean-tags \
		mostlyclean-generic

mostlyclean: mostlyclean-recursive

clean-am:  clean-libLTLIBRARIES clean-compile clean-libtool clean-tags \
		clean-generic mostlyclean-am

clean: clean-recursive

distclean-am:  distclean-libLTLIBRARIES distclean-compile \
		distclean-libtool distclean-tags distclean-generic \
		clean-am
	-rm -f libtool

distclean: distclean-recursive

maintainer-clean-am:  maintainer-clean-libLTLIBRARIES \
		maintainer-clean-compile maintainer-clean-libtool \
		maintainer-clean-tags maintainer-clean-generic \
		distclean-am
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."

maintainer-clean: maintainer-clean-recursive

.PHONY: mostlyclean-libLTLIBRARIES distclean-libLTLIBRARIES \
clean-libLTLIBRARIES maintainer-clean-libLTLIBRARIES \
uninstall-libLTLIBRARIES install-libLTLIBRARIES mostlyclean-compile \
distclean-compile clean-compile maintainer-clean-compile \
mostlyclean-libtool distclean-libtool clean-libtool \
maintainer-clean-libtool install-data-recursive \
uninstall-data-recursive install-exec-recursive \
uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
all-recursive check-recursive installcheck-recursive info-recursive \
dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
install-exec install-data-am install-data install-am install \
uninstall-am uninstall all-redirect all-am all installdirs-am \
installdirs mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean


# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
