PersistenceManager is the primary interface for JDO-aware
* application components. It is the factory for Query and
* Transaction instances, and contains methods to manage the
* life cycle of PersistenceCapable instances.
*
* A PersistenceManager is obtained from the
* {@link PersistenceManagerFactory}
* (recommended) or by construction.
* @version 2.0
*/
public interface PersistenceManager {
/**
* A PersistenceManager instance can be used until it is
* closed.
* @return true if this PersistenceManager has
* been closed.
* @see #close()
*/
boolean isClosed ();
/** Close this PersistenceManager so that no further requests
* may be made on it. A PersistenceManager instance can be
* used only until it is closed.
*
*
Closing a PersistenceManager might release it to the pool
* of available PersistenceManagers, or might be garbage
* collected, at the option of the JDO implementation. Before being used
* again to satisfy a getPersistenceManager() request, the
* default values for options will be restored to their values as specified
* in the PersistenceManagerFactory.
*
*
This method closes the PersistenceManager.
*/
void close ();
/** Return the Transaction instance associated with a
* PersistenceManager. There is one Transaction
* instance associated with each PersistenceManager instance.
* The Transaction instance supports options as well as
* transaction completion requests.
* @return the Transaction associated with this
* PersistenceManager.
*/
Transaction currentTransaction();
/** Mark an instance as no longer needed in the cache. Eviction is normally
* done automatically by the PersistenceManager at transaction
* completion. This method allows the application to explicitly provide a
* hint to the PersistenceManager that the instance is no
* longer needed in the cache.
* @param pc the instance to evict from the cache.
*/
void evict (Object pc);
/** Mark an array of instances as no longer needed in the cache.
* @see #evict(Object pc)
* @param pcs the array of instances to evict from the cache.
*/
void evictAll (Object[] pcs);
/** Mark a Collection of instances as no longer needed in the
* cache.
* @see #evict(Object pc)
* @param pcs the Collection of instances to evict from the
* cache.
*/
void evictAll (Collection pcs);
/** Mark all persistent-nontransactional instances as no longer needed
* in the cache. It transitions
* all persistent-nontransactional instances to hollow. Transactional
* instances are subject to eviction based on the RetainValues setting.
* @see #evict(Object pc)
*/
void evictAll ();
/** Refresh the state of the instance from the data store.
*
*
In an optimistic transaction, the state of instances in the cache * might not match the state in the data store. This method is used to * reload the state of the instance from the data store so that a subsequent * commit is more likely to succeed. *
Outside a transaction, this method will refresh nontransactional
* state.
* @param pc the instance to refresh.
*/
void refresh (Object pc);
/** Refresh the state of an array of instances from the data store.
*
* @see #refresh(Object pc)
* @param pcs the array of instances to refresh.
*/
void refreshAll (Object[] pcs);
/** Refresh the state of a Collection of instances from the
* data store.
*
* @see #refresh(Object pc)
* @param pcs the Collection of instances to refresh.
*/
void refreshAll (Collection pcs);
/** Refresh the state of all applicable instances from the data store.
*
If called with an active transaction, all transactional instances
* will be refreshed. If called outside an active transaction, all
* nontransactional instances will be refreshed.
* @see #refresh(Object pc)
*/
void refreshAll ();
/**
* Refreshes all instances in the exception that failed verification.
*
* @since 2.0
*/
void refreshAll (JDOException jdoe);
/** Create a new Query with no elements.
* @return the new Query.
*/
Query newQuery ();
/** Create a new Query using elements from another
* Query. The other Query must have been created
* by the same JDO implementation. It might be active in a different
* PersistenceManager or might have been serialized and
* restored.
*
All of the settings of the other Query are copied to this
* Query, except for the candidate Collection or
* Extent.
* @return the new Query
* @param compiled another Query from the same JDO
* implementation
*/
Query newQuery (Object compiled);
/** Create a Construct a new query instance using the specified String
* as the single-string representation of the query.
* @param query the single-string query
* @return the new Query
* @since 2.0
*/
Query newQuery (String query);
/** Create a new Query using the specified language.
* @param language the language of the query parameter
* @param query the query, which is of a form determined by the language
* @return the new Query
*/
Query newQuery (String language, Object query);
/** Create a new Query specifying the Class of the
* candidate instances.
* @param cls the Class of the candidate instances
* @return the new Query
*/
Query newQuery (Class cls);
/** Create a new Query with the Class of the
* candidate instances and candidate Extent.
* @param cln the Extent of candidate instances
* @return the new Query
*/
Query newQuery (Extent cln);
/** Create a new Query with the candidate Class
* and Collection.
* @param cls the Class of results
* @param cln the Collection of candidate instances
* @return the new Query
*/
Query newQuery (Class cls, Collection cln);
/** Create a new Query with the Class of the
* candidate instances and filter.
* @param cls the Class of results
* @param filter the filter for candidate instances
* @return the new Query
*/
Query newQuery (Class cls, String filter);
/** Create a new Query with the Class of the
* candidate instances,
* candidate Collection, and filter.
* @param cls the Class of candidate instances
* @param cln the Collection of candidate instances
* @param filter the filter for candidate instances
* @return the new Query
*/
Query newQuery (Class cls, Collection cln, String filter);
/** Create a new Query with the
* candidate Extent and filter; the class
* is taken from the Extent.
* @param cln the Extent of candidate instances
* @param filter the filter for candidate instances
* @return the new Query
*/
Query newQuery (Extent cln, String filter);
/**
* Create a new Query with the given candidate class
* from a named query. The query name given must be the name of a
* query defined in metadata.
* @param cls the Class of candidate instances
* @param queryName the name of the query to look up in metadata
* @return the new Query
*/
Query newNamedQuery (Class cls, String queryName);
/** The PersistenceManager manages a collection of instances in
* the data store based on the class of the instances. This method returns
* an Extent of instances in the data store that might be
* iterated or given to a Query. The Extent
* itself might not reference any instances, but only hold the class name
* and an indicator as to whether subclasses are included in the
* Extent.
*
Note that the Extent might be very large.
* @param persistenceCapableClass Class of instances
* @param subclasses whether to include instances of subclasses
* @return an Extent of the specified Class
* @see Query
*/
Extent getExtent (Class persistenceCapableClass, boolean subclasses);
/**
* Equivalent to getExtent (persistenceCapableClass,
* true).
* @see #getExtent(Class,boolean)
* @since 2.0
*/
Extent getExtent (Class persistenceCapableClass);
/** This method locates a persistent instance in the cache of instances
* managed by this PersistenceManager.
* The getObjectById method attempts
* to find an instance in the cache with the specified JDO identity.
* The oid parameter object might have been returned by an
* earlier call to getObjectId or
* getTransactionalObjectId, or might have been constructed by
* the application.
*
If the PersistenceManager is unable to resolve the
* oid parameter to an ObjectId instance, then it throws a
* JDOUserException.
*
If the validate flag is false, and there is
* already an instance in the cache with the same JDO identity as the
* oid parameter, then this method returns it. There is no
* change made to the state of the returned instance.
*
If there is not an instance already in the cache with the same JDO
* identity as the oid parameter, then this method creates an
* instance with the specified JDO identity and returns it. If there is no
* transaction in progress, the returned instance will be hollow or
* persistent-nontransactional, at the choice of the implementation.
*
If there is a transaction in progress, the returned instance will * be hollow, persistent-nontransactional, or persistent-clean, at the * choice of the implementation. *
It is an implementation decision whether to access the data store,
* if required to determine the exact class. This will be the case of
* inheritance, where multiple PersistenceCapable classes share
* the same ObjectId class.
*
If the validate flag is false, and the instance does not
* exist in the data store, then this method might not fail. It is an
* implementation choice whether to fail immediately with a
* JDOObjectNotFoundException. But a subsequent access
* of the fields of the
* instance will throw a JDOObjectNotFoundException
* if the instance does not
* exist at that time. Further, if a relationship is established to this
* instance, then the transaction in which the association was made will
* fail.
*
If the validate flag is true, and there is
* already a transactional instance in the cache with the same JDO identity
* as the oid parameter, then this method returns it. There is
* no change made to the state of the returned instance.
*
If there is an instance already in the cache with the same JDO
* identity as the oid parameter, but the instance is not
* transactional, then it must be verified in the data store. If the
* instance does not exist in the datastore, then a
* JDOObjectNotFoundException is thrown.
*
If there is not an instance already in the cache with the same JDO
* identity as the oid parameter, then this method creates an
* instance with the specified JDO identity, verifies that it exists in the
* data store, and returns it. If there is no transaction in progress, the
* returned instance will be hollow or persistent-nontransactional,
* at the choice of the implementation.
*
If there is a data store transaction in progress, the returned
* instance will be persistent-clean.
* If there is an optimistic transaction in progress, the returned
* instance will be persistent-nontransactional.
* @see #getObjectId(Object pc)
* @see #getTransactionalObjectId(Object pc)
* @return the The If the object identity is being changed in the transaction, by the
* application modifying one or more of the application key fields,
* then this method returns the identity as of the beginning of the
* transaction. The value returned by Within a transaction, the ObjectId returned
* will compare equal to the ObjectId returned by only one among all JDO
* instances associated with the The ObjectId does not necessarily contain any internal state of the
* instance, nor is it necessarily an instance of the class used to
* manage identity internally. Therefore, if the application makes a
* change to the ObjectId instance returned by this method, there is
* no effect on the instance from which the ObjectId was obtained.
* The If the object identity is being changed in the transaction, by the
* application modifying one or more of the application key fields,
* then this method returns the current identity in the transaction.
* If there is no transaction in progress, or if none of the key fields
* is being modified, then this method will return the same value as
* During makePersistent of transient instances, the create life cycle
* listener is called.
* For detached instances, it locates or instantiates a persistent
* instance with the same JDO identity as the detached instance,
* and merges the persistent state of the detached instance into the
* persistent instance. Only the state of persistent fields is merged.
* If non-persistent state needs to be copied, the application should
* use the jdoPostAttach callback or the postAttach lifecycle event
* listener. Any references to the detached instances from instances
* in the closure of the parameter instances are modified to refer to
* the corresponding persistent instance instead of to the
* detached instance.
* During attachment of detached instances, the attach callbacks
* and attach life cycle listeners are called.
* During application of changes of the detached state, if the JDO
* implementation can determine that there were no changes made during
* detachment, then the implementation is not required to mark the
* corresponding instance dirty. If it cannot determine if changes
* were made, then it must mark the instance dirty.
* No consistency checking is done during makePersistent of detached
* instances. If consistency checking is required by the application,
* then flush or checkConsistency should be called after attaching the
* instances.
* These methods have no effect on parameter persistent instances
* already managed by this PersistenceManager. They will throw a
* JDOUserException if the parameter instance is managed by a
* different PersistenceManager.
* If an instance is of a class whose identity type (application,
* datastore, or none) is not supported by the JDO implementation,
* then a JDOUserException will be thrown for that instance.
* The return value for parameter instances in the transient or persistent
* states is the same as the parameter value. The return value for
* parameter instances in the detached state is the persistent instance
* corresponding to the detached instance.
* The return values for makePersistentAll methods correspond by position
* to the parameter instances.
* @param pc an instance of a The instance loses its JDO identity and it is no longer associated
* with any The instances lose their JDO identity and they are no longer
* associated with any The instances lose their JDO identity and they are no longer
* associated with any The affected instance(s) lose their JDO identity and are no longer
* associated with any If the useFetchPlan parameter is true, then the current FetchPlan
* is applied to the pc parameter, as if detachCopy(Object) had been
* called. After the graph of instances is loaded, the instances
* reachable via loaded fields is made transient. The state of fields
* in the affected instances is as specified by the FetchPlan.
* Unlike detachCopy, the instances are not detached; there is no
* detachment information in the instances.
* The instances to be made transient do not need to
* implement the javax.jdo.spi.Detachable interface.
* @param pc the root instance to make transient.
* @param useFetchPlan whether to use the current fetch plan to determine
* which fields to load and which instances to make transient
* @since 2.0
*/
void makeTransient (Object pc, boolean useFetchPlan);
/** Make instances transient, removing them from management
* by this The affected instance(s) lose their JDO identity and are no longer
* associated with any If the useFetchPlan parameter is true, then the current FetchPlan
* is applied to the pcs parameters and the entire graph of instances
* reachable via loaded fields is made transient. The state of fields
* in the affected instances is as specified by the FetchPlan.
* Unlike detachCopy, the instances are not detached; there is no
* detachment information in the instances.
* The instances to be made transient do not need to
* implement the javax.jdo.spi.Detachable interface.
* @param pcs the root instances to make transient.
* @param useFetchPlan whether to use the current fetch plan to determine
* which fields to load and which instances to make transient
* @since 2.0
*/
void makeTransientAll (Object[] pcs, boolean useFetchPlan);
/** Make instances transient, removing them from management
* by this The affected instance(s) lose their JDO identity and are no longer
* associated with any If the useFetchPlan parameter is true, then the current FetchPlan
* is applied to the pcs parameters and the entire graph of instances
* reachable via loaded fields is made transient. The state of fields
* in the affected instances is as specified by the FetchPlan.
* Unlike detachCopy, the instances are not detached; there is no
* detachment information in the instances.
* The instances to be made transient do not need to
* implement the javax.jdo.spi.Detachable interface.
* @param pcs the root instances to make transient.
* @param useFetchPlan whether to use the current fetch plan to determine
* which fields to load and which instances to make transient
* @since 2.0
*/
void makeTransientAll (Collection pcs, boolean useFetchPlan);
/** Make an instance subject to transactional boundaries.
*
* Transient instances normally do not observe transaction boundaries.
* This method makes transient instances sensitive to transaction
* completion. If an instance is modified in a transaction, and the
* transaction rolls back, the state of the instance is restored to the
* state before the first change in the transaction.
*
* For persistent instances read in optimistic transactions, this method
* allows the application to make the state of the instance part of the
* transactional state. At transaction commit, the state of the instance in
* the cache is compared to the state of the instance in the data store. If
* they are not the same, then an exception is thrown.
* @param pc the instance to make transactional.
*/
void makeTransactional (Object pc);
/** Make an array of instances subject to transactional boundaries.
* @param pcs the array of instances to make transactional.
* @see #makeTransactional(Object pc)
*/
void makeTransactionalAll (Object[] pcs);
/** Make a Normally, at transaction completion, instances are evicted from the
* cache. This method allows an application to identify an instance as
* not being evicted from the cache at transaction completion. Instead,
* the instance remains in the cache with nontransactional state.
*
* @param pc the instance to make nontransactional.
*/
void makeNontransactional (Object pc);
/** Make an array of instances non-transactional after commit.
*
* @param pcs the array of instances to make nontransactional.
* @see #makeNontransactional(Object pc)
*/
void makeNontransactionalAll (Object[] pcs);
/** Make a The If the useFetchPlan parameter is false, this method behaves exactly
* as the corresponding method without the useFetchPlan parameter.
* If the useFetchPlan parameter is true, and the fetch plan has not been
* modified from its default setting, all fields in the current fetch plan
* are fetched, and other fields might be fetched lazily by the
* implementation. If the useFetchPlan parameter is true, and the fetch
* plan has been changed from its default setting, then the fields
* specified by the fetch plan are loaded, along with related instances
* specified by the fetch plan.
* @param pc the instance
* @param useFetchPlan whether to use the current fetch plan to determine
* which fields to load and which instances to retrieve.
* @since 2.0
*/
void retrieve (Object pc, boolean useFetchPlan);
/** Retrieve field values of instances from the store. This tells
* the The If the useFetchPlan parameter is false, this method behaves exactly
* as the corresponding method without the useFetchPlan parameter.
* If the useFetchPlan parameter is true, and the fetch plan has not been
* modified from its default setting, all fields in the current fetch plan
* are fetched, and other fields might be fetched lazily by the
* implementation. If the useFetchPlan parameter is true, and the fetch
* plan has been changed from its default setting, then the fields
* specified by the fetch plan are loaded, along with related instances
* specified by the fetch plan.
* @param pcs the instances
* @param useFetchPlan whether to use the current fetch plan to determine
* which fields to load and which instances to retrieve.
* @since 1.0.1
*/
void retrieveAll (Collection pcs, boolean useFetchPlan);
/** Retrieve field values of instances from the store. This tells
* the The If the useFetchPlan parameter is false, this method behaves exactly
* as the corresponding method without the useFetchPlan parameter.
* If the useFetchPlan parameter is true, and the fetch plan has not been
* modified from its default setting, all fields in the current fetch plan
* are fetched, and other fields might be fetched lazily by the
* implementation. If the useFetchPlan parameter is true, and the fetch
* plan has been changed from its default setting, then the fields
* specified by the fetch plan are loaded, along with related instances
* specified by the fetch plan.
* @param pcs the instances
* @param useFetchPlan whether to use the current fetch plan to determine
* which fields to load and which instances to retrieve.
* @since 1.0.1
*/
void retrieveAll (Object[] pcs, boolean useFetchPlan);
/** The application can manage the In order for the application to construct an instance of the ObjectId
* class it needs to know the class being used by the JDO implementation.
* @param cls the IgnoreCache set to IgnoreCache set to DetachAllOnCommit set to If a datastore transaction is active, this method
* synchronizes the cache with the datastore and reports any
* exceptions. If an optimistic transaction is active, this method obtains
* a datastore connection, synchronizes the cache with the
* datastore using this connection and reports any
* exceptions. The connection obtained by this method is held
* until the end of the transaction. If exceptions occur during flush, the implementation will
* set the current transaction's If a datastore transaction is active, this method verifies
* the consistency of instances in the cache against the
* datastore. An implementation might flush instances as if
* {@link #flush} were called, but it is not required to do
* so. If an optimistic transaction is active, this method obtains
* a datastore connection and verifies the consistency of the
* instances in the cache against the datastore. If any
* inconsistencies are detected, a {@link
* JDOOptimisticVerificationException} is thrown. This exception
* contains a nested {@link JDOOptimisticVerificationException}
* for each object that failed the consistency check. No
* datastore resources acquired during the execution of this
* method are held beyond the scope of this method. The listenerInstance will be called for each event for which it
* implements the corresponding listenerInstance interface.PersistenceCapable instance with the specified
* ObjectId
* @param oid an ObjectId
* @param validate if the existence of the instance is to be validated
*/
Object getObjectById (Object oid, boolean validate);
/**
* Looks up the instance of the given type with the given key.
* @param cls The type of object to load
* @param key either the string representation of the object id, or
* an object representation of a single field identity key
* @return the corresponding persistent instance
* @since 2.0
*/
Object getObjectById (Class cls, Object key);
/**
* Looks up the instance corresponding to the specified oid. This is
* equivalent to getObjectById(oid, true);
* @param oid The object id of the object to load
* @return the corresponding persistent instance
*/
Object getObjectById (Object oid);
/** The ObjectId returned by this method represents the JDO identity of
* the instance. The ObjectId is a copy (clone) of the internal state
* of the instance, and changing it does not affect the JDO identity of
* the instance.
* getObjectId method returns an ObjectId instance that
* represents the object identity of the specified JDO instance. The
* identity is guaranteed to be unique only in the context of the JDO
* PersistenceManager that created the identity, and only for
* two types of JDO Identity: those that are managed by the application, and
* those that are managed by the data store.
* getObjectId will be
* different following afterCompletion processing for
* successful transactions. PersistenceManager regardless
* of the type of ObjectId.
* getObjectById method can be used between instances of
* PersistenceManager of different JDO vendors only for
* instances of persistence capable classes using application-managed
* (primary key) JDO identity. If it is used for instances of classes using
* datastore identity, the method might succeed, but there are no guarantees
* that the parameter and return instances are related in any way.
* @see #getTransactionalObjectId(Object pc)
* @see #getObjectById(Object oid, boolean validate)
* @param pc the PersistenceCapable instance
* @return the ObjectId of the instance
*/
Object getObjectId (Object pc);
/** The ObjectId returned by this method represents the JDO identity of
* the instance. The ObjectId is a copy (clone) of the internal state
* of the instance, and changing it does not affect the JDO identity of
* the instance.
* getObjectId.
* @see #getObjectId(Object pc)
* @see #getObjectById(Object oid, boolean validate)
* @param pc a PersistenceCapable instance
* @return the ObjectId of the instance
*/
Object getTransactionalObjectId (Object pc);
/**
* This method returns an object id instance corresponding to the pcClass
* and key arguments.
* @param pcClass the Class of the persistence-capable instance
* @param key for single-field identity, the parameter for the
* constructor; for non-single-field application identity, the result
* of toString() on the object id instance.
* @return an instance of the object identity class
*/
Object newObjectIdInstance (Class pcClass, Object key);
/**
* Return the objects with the given oids.
* @param oids the oids of the objects to return
* @param validate if true, the existance of the objects in
* the datastore will be validated.
* @return the objects that were looked up, in the
* same order as the oids parameter.
* @see #getObjectById(Object,boolean)
* @since 2.0
*/
Collection getObjectsById (Collection oids, boolean validate);
/**
* Return the objects with the given oids. This method is equivalent
* to calling {@link #getObjectsById(Collection, boolean)}
* with the validate flag true.
* @param oids the oids of the objects to return
* @return the objects that were looked up, in the
* same order as the oids parameter.
* @see #getObjectsById(Collection,boolean)
* @since 2.0
*/
Collection getObjectsById (Collection oids);
/**
* Return the objects with the given oids.
* @param oids the oids of the objects to return
* @param validate if true, the existance of the objects in
* the datastore will be validated.
* @return the objects that were looked up, in the
* same order as the oids parameter.
* @see #getObjectById(Object,boolean)
* @since 2.0
*/
Object[] getObjectsById (Object[] oids, boolean validate);
/**
* Return the objects with the given oids. This method is equivalent
* to calling {@link #getObjectsById(Object[],boolean)}
* with the validate flag true.
* @param oids the oids of the objects to return
* @return the objects that were looked up, in the
* same order as the oids parameter.
* @see #getObjectsById(Object[],boolean)
* @since 2.0
*/
Object[] getObjectsById (Object[] oids);
/** Make the parameter instance persistent in this
* PersistenceManager.
* This method makes transient instances persistent and applies detached
* instance changes to the cache. It must be called in the context of
* an active transaction, or a JDOUserException is thrown. For a transient
* instance, it assigns an object identity to the instance and transitions
* it to persistent-new. Any transient instances reachable from this
* instance via persistent fields of this instance become provisionally
* persistent, transitively. That is, they behave as persistent-new
* instances (return true to isPersistent, isNew, and isDirty).
* But at commit time, the reachability algorithm is run again,
* and instances made provisionally persistent that are not then
* reachable from persistent instances will revert to transient.
* Class that is persistent
* capable.
* @return the parameter instance for parameters in the transient or
* persistent state, or the corresponding persistent instance
* for detached parameter instances
*/
Object makePersistent (Object pc);
/** Make an array of instances persistent.
* @param pcs an array of instances
* @return the parameter instances for parameters in the transient or
* persistent state, or the corresponding persistent instance
* for detached parameter instances, in the same order as in the
* parameter array
* @see #makePersistent(Object pc)
*/
Object[] makePersistentAll (Object[] pcs);
/** Make a Collection of instances persistent.
* @param pcs a Collection of instances
* @return the parameter instance for parameters in the transient or
* persistent state, or the corresponding persistent instance
* for detached parameter instances, with an iteration in the same order
* as in the parameter Collection
* @see #makePersistent(Object pc)
*/
Collection makePersistentAll (Collection pcs);
/** Delete the persistent instance from the data store.
* This method must be called in an active transaction.
* The data store object will be removed at commit.
* Unlike makePersistent, which makes the closure of the
* instance persistent, the closure of the instance is not deleted from the
* data store. This method has no effect if the instance is already deleted
* in the current transaction.
* This method throws JDOUserException if the instance is
* transient or is managed by another PersistenceManager.
*
* @param pc a persistent instance
*/
void deletePersistent (Object pc);
/** Delete an array of instances from the data store.
* @param pcs a Collection of persistent instances
* @see #deletePersistent(Object pc)
*/
void deletePersistentAll (Object[] pcs);
/** Delete a Collection of instances from the data store.
* @param pcs a Collection of persistent instances
* @see #deletePersistent(Object pc)
*/
void deletePersistentAll (Collection pcs);
/** Make an instance transient, removing it from management by this
* PersistenceManager.
*
* PersistenceManager. The state of fields is
* preserved unchanged.
* @param pc the instance to make transient.
*/
void makeTransient (Object pc);
/** Make an array of instances transient, removing them from management by
* this PersistenceManager.
*
* PersistenceManager. The state of fields
* is preserved unchanged.
* @param pcs the instances to make transient.
*/
void makeTransientAll (Object[] pcs);
/** Make a Collection of instances transient, removing them
* from management by this PersistenceManager.
*
* PersistenceManager. The state of fields
* is preserved unchanged.
* @param pcs the instances to make transient.
*/
void makeTransientAll (Collection pcs);
/** Make an instance transient, removing it from management by this
* PersistenceManager. If the useFetchPlan parameter is
* false, this method behaves exactly as makeTransient(Object pc).
* PersistenceManager. The state
* of fields is unchanged.
* PersistenceManager. If the useFetchPlan parameter
* is false, this method behaves exactly as makeTransientAll(Object[] pcs).
* PersistenceManager. The state
* of fields is unchanged.
* PersistenceManager. If the useFetchPlan parameter
* is false, this method behaves exactly as
* makeTransientAll(Collection pcs).
* PersistenceManager. The state
* of fields is unchanged.
* Collection of instances subject to transactional
* boundaries.
* @param pcs the Collection of instances to make
* transactional.
* @see #makeTransactional(Object pc)
*/
void makeTransactionalAll (Collection pcs);
/** Make an instance non-transactional after commit.
*
* Collection of instances non-transactional after
* commit.
*
* @param pcs the Collection of instances to make
* nontransactional.
* @see #makeNontransactional(Object pc)
*/
void makeNontransactionalAll (Collection pcs);
/** Retrieve field values of an instance from the store. This tells
* the PersistenceManager that the application intends to use
* the instance, and its field values must be retrieved.
* PersistenceManager might use policy information about
* the class to retrieve associated instances.
* @param pc the instance
*/
void retrieve (Object pc);
/** Retrieve field values of an instance from the store. This tells
* the PersistenceManager that the application intends to use
* the instance, and its field values must be retrieved.
* PersistenceManager that the application intends to use
* the instances, and all field values must be retrieved.
* PersistenceManager might use policy information about
* the class to retrieve associated instances.
* @param pcs the instances
*/
void retrieveAll (Collection pcs);
/** Retrieve field values of instances from the store. This tells
* the PersistenceManager that the application intends to use
* the instances, and their field values should be retrieved. The fields
* in the current fetch group must be retrieved, and the implementation
* might retrieve more fields than the current fetch group.
* PersistenceManager that the application intends to use
* the instances, and all field values must be retrieved.
* PersistenceManager might use policy information about
* the class to retrieve associated instances.
* @param pcs the instances
*/
void retrieveAll (Object[] pcs);
/** Retrieve field values of instances from the store. This tells
* the PersistenceManager that the application intends to use
* the instances, and their field values should be retrieved. The fields
* in the current fetch group must be retrieved, and the implementation
* might retrieve more fields than the current fetch group.
* PersistenceManager instances
* more easily by having an application object associated with each
* PersistenceManager instance.
* @param o the user instance to be remembered by the
* PersistenceManager
* @see #getUserObject
*/
void setUserObject (Object o);
/** The application can manage the PersistenceManager instances
* more easily by having an application object associated with each
* PersistenceManager instance.
* @return the user object associated with this
* PersistenceManager
* @see #setUserObject
*/
Object getUserObject ();
/** This method returns the PersistenceManagerFactory used to
* create this PersistenceManager.
* @return the PersistenceManagerFactory that created
* this PersistenceManager
*/
PersistenceManagerFactory getPersistenceManagerFactory();
/** Return the Class that implements the JDO Identity for the
* specified PersistenceCapable class. The application can use
* the returned Class to construct a JDO Identity instance for
* application identity PersistenceCapable classes. This JDO
* Identity instance can then be used to get an instance of the
* PersistenceCapable class for use in the application.
*
* PersistenceCapable Class
* @return the Class of the ObjectId of the parameter
* @see #getObjectById
*/
Class getObjectIdClass(Class cls);
/** Set the Multithreaded flag for this PersistenceManager.
* Applications that use multiple threads to invoke methods or access fields
* from instances managed by this PersistenceManager must set
* this flag to true.
* Instances managed by this PersistenceManager include
* persistent or transactional instances of PersistenceCapable
* classes, as well as helper instances such as Query,
* Transaction, or Extent.
* @param flag the Multithreaded setting.
*/
void setMultithreaded (boolean flag);
/** Get the current Multithreaded flag for this
* PersistenceManager.
* @see #setMultithreaded
* @return the Multithreaded setting.
*/
boolean getMultithreaded();
/** Set the ignoreCache parameter for queries.
*
* true specifies that for all
* Query instances created by this
* PersistenceManager, the default is the cache should be
* ignored for queries.
* @param flag the ignoreCache setting.
*/
void setIgnoreCache(boolean flag);
/** Get the ignoreCache setting for queries.
*
* true specifies that for all
* Query instances created by this
* PersistenceManager, the default is the cache should be
* ignored for queries.
* @return the ignoreCache setting.
*/
boolean getIgnoreCache();
/** Gets the detachAllOnCommit setting.
* @see #setDetachAllOnCommit(boolean)
* @since 2.0
* @return the detachAllOnCommit setting.
*/
boolean getDetachAllOnCommit();
/** Sets the detachAllOnCommit setting.
*
* false specifies that the
* state of persistent instances in the cache after commit is defined
* by the retainValues flag. With this flag set to true,
* during beforeCompletion all cached instances are prepared for
* detachment according to the fetch plan in effect at commit. Loading
* fields and unloading fields required by the fetch plan is done after
* calling the user's beforeCompletion callback. During
* afterCompletion, before calling the user's
* afterCompletion callback, all detachable persistent
* instances in the cache transition to detached; non-detachable
* persistent instances transition to transient; and detachable
* instances can be serialized as detached instances. Transient
* transactional instances are unaffected by this flag.
*
* @see #getDetachAllOnCommit()
* @since 2.0
*/
void setDetachAllOnCommit(boolean flag);
/**
* Detach the specified instance from the PersistenceManager.
* The flags for detachment (DETACH_LOAD_FIELDS and DETACH_UNLOAD_FIELDS)
* and the active fetch groups determine the scope of fetching for the
* graph of instances reachable from the pc parameter. The state of fields
* in the affected instances is as specified by the FetchPlan.
* @param pc the instance to detach
* @return the detached instance
* @see #detachCopyAll(Object[])
* @since 2.0
*/
Object detachCopy (Object pc);
/**
* Detach the specified instances from the PersistenceManager.
* The flags for detachment (DETACH_LOAD_FIELDS and DETACH_UNLOAD_FIELDS)
* and the active fetch groups determine the scope of fetching for the
* graph of instances reachable from the pcs parameter. The state of fields
* in the affected instances is as specified by the FetchPlan.
* @param pcs the instances to detach
* @return the detached instances
* @see #detachCopyAll(Object[])
* @since 2.0
*/
Collection detachCopyAll (Collection pcs);
/**
* Detach the specified instances from the PersistenceManager.
* The flags for detachment (DETACH_LOAD_FIELDS and DETACH_UNLOAD_FIELDS)
* and the active fetch groups determine the scope of fetching for the
* graph of instances reachable from the pcs parameter. The state of fields
* in the affected instances is as specified by the FetchPlan.
* The objects returned can be manipulated and re-attached with
* {@link #makePersistentAll(Object[])}.
* The detached instances will be
* unmanaged copies of the specified parameters, and are suitable
* for serialization and manipulation outside of a JDO
* environment. When detaching instances, only fields in the
* current {@link FetchPlan} will be traversed. Thus, to detach a
* graph of objects, relations to other persistent instances must
* either be in the default-fetch-group, or in the
* current custom {@link FetchPlan}.
* @param pcs the instances to detach
* @return the detached instances
* @throws JDOUserException if any of the instances to be detached do not
* implement the javax.jdo.spi.Detachable interface.
* @see #makePersistentAll(Object[])
* @see #getFetchPlan
* @since 2.0
*/
Object[] detachCopyAll (Object [] pcs);
/**
* Put the specified key-value pair into the map of user objects.
* @since 2.0
*/
Object putUserObject (Object key, Object val);
/**
* Get the value for the specified key from the map of user objects.
* @param key the key of the object to be returned
* @return the object
* @since 2.0
*/
Object getUserObject (Object key);
/**
* Remove the specified key and its value from the map of user objects.
* @param key the key of the object to be removed
* @since 2.0
*/
Object removeUserObject (Object key);
/**
* Flushes all dirty, new, and deleted instances to the data
* store. It has no effect if a transaction is not active.
* RollbackOnly flag
* (see {@link Transaction#setRollbackOnly}).PersistenceManager cache with the
* datastore. This method has no effect if a transaction is not
* active.
* FetchPlan used by this
* PersistenceManager.
* @return the FetchPlan
* @since 2.0
*/
FetchPlan getFetchPlan ();
/**
* Creates an instance of a persistence-capable interface,
* or of a concrete or abstract class.
* The returned instance is transient.
* @param pcClass Must be a persistence-capable interface,
* or a concrete or abstract class that is declared in the metadata.
* @return the created instance
* @since 2.0
*/
Object newInstance (Class pcClass);
/**
* Returns the sequence identified by name.
* @param name the name of the Sequence
* @return the Sequence
* @since 2.0
*/
Sequence getSequence (String name);
/**
* If this method is called while a datastore transaction is
* active, the object returned will be enlisted in the current
* transaction. If called in an optimistic transaction or outside
* an active transaction, the object returned will not be
* enlisted in any transaction.
* @return the JDOConnection instance
* @since 2.0
*/
JDOConnection getDataStoreConnection ();
/**
* Adds the listener instance to the list of lifecycle event
* listeners. The classes parameter identifies all
* of the classes of interest. If the classes
* parameter is specified as null, events for all
* persistent classes and interfaces will be sent to
* listenerInstance.
*