#!@@SHELL_BINARY@@
# -*- mode: sh; sh-shell: sh -*-
# IPsec startup and shutdown command
# Copyright (C) 1998, 1999, 2001  Henry Spencer.
# Copyright (C) 2012 Paul Wouters <paul@libreswan.org>
# Copyright (C) 2013-2019 Tuomo Soini <tis@foobar.fi>
# Copyright (C) 2016 Kim B. Heino <b@bbbs.net>
# Copyright (C) 2019 Paul Wouters <pwouters@redhat.com>
#
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the
# Free Software Foundation; either version 2 of the License, or (at your
# option) any later version.  See <https://www.gnu.org/licenses/gpl2.txt>.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
# for more details.
#
# This is the version for use on Linux.

# Misc. paths (some of this should perhaps be overridable from ipsec.conf).
rundir=@@RUNDIR@@

#pluto searches the current directory, so this is required for making it selinux compliant
cd /

#/etc/resolv.conf related paths
LIBRESWAN_RESOLV_CONF=${rundir}/libreswan-resolv-conf-backup
ORIG_RESOLV_CONF=@@SYSCONFDIR@@/resolv.conf

initsystem="@@INITSYSTEM@@"

# linux_START
# The stock Fedora/RHEL RPM gets tested in side namespaces where
# things get invoked directly is needed.
if echo $SUDO_COMMAND | grep "/bin/nsenter " && test -f /testing/guestbin/swan-prep > /dev/null 2>&1 ; then
    # direct start
    initsystem=namespaces
fi
# linux_STOP

case "$1" in

    start|--start|_autostart)
	# preliminaries
	mkdir -p ${rundir}
	chmod 700 ${rundir} > /dev/null 2>/dev/null

	# start regular pluto daemon in a restart loop
	case "${initsystem}" in
	    systemd )
		echo "Redirecting to: systemctl start ipsec.service"
		exec systemctl start ipsec.service
		;;
	    rhsysv )
		echo "Redirecting to: service ipsec start"
		exec service ipsec start
		;;
	    upstart )
		echo "Redirecting to: start ipsec"
		exec start ipsec
		;;
	    openrc )
		echo "Redirecting to: rc-service ipsec start"
		exec rc-service ipsec start
		;;
	    sysvinit )
		echo "Redirecting to: @@INIT_D_DIR@@/ipsec start"
		exec @@INIT_D_DIR@@/ipsec start
		;;
	    docker )
		echo "Redirecting to: @@INIT_D_DIR@@/ipsec start"
		exec @@INIT_D_DIR@@/ipsec start
		;;
	    rc.d )
		echo "Redirecting to: @@RC_D_DIR@@/pluto onestart"
		exec @@RC_D_DIR@@/pluto onestart
		;;
	    namespaces )
		echo "Redirecting to: namespaces direct start via ipsec pluto"
		ipsec --checknflog > /dev/null
		exec ipsec pluto --config @@IPSEC_CONF@@ --leak-detective
		;;
	    "" )
		what="ipsec pluto --logfile @@LOGDIR@@/pluto.log --config @@IPSEC_CONF@@ --leak-detective"
		echo "Redirecting to: ${what} [start manually]"
		exec ${what}
		;;
	    * )
		echo "Unknown init system ${initsystem} in use - aborted"
		exit 3
		;;
	esac
	exit 0 # never happens?
	;;

  stop|--stop|_autostop)	# _autostop is same as stop
	# Shut things down.

	case "${initsystem}" in
	    systemd )
		echo "Redirecting to: systemctl stop ipsec.service"
		# don't exec, we need to cleanup the IPsec stack afterwards
		systemctl stop ipsec.service
		;;
	    rhsysv )
		echo "Redirecting to: service ipsec stop"
		exec service ipsec stop
		;;
	    upstart )
		echo "Redirecting to: stop ipsec"
		stop ipsec
		;;
	    openrc )
		echo "Redirecting to: rc-service ipsec stop"
		exec rc-service ipsec stop
		;;
	    sysvinit )
		echo "Redirecting to: @@INIT_D_DIR@@/ipsec stop"
		exec @@INIT_D_DIR@@/ipsec stop
		;;
	    docker )
		echo "Redirecting to: @@INIT_D_DIR@@/ipsec stop"
		exec @@INIT_D_DIR@@/ipsec stop
		;;
	    rc.d )
		echo "Redirecting to: @@RC_D_DIR@@/pluto onestop"
		@@RC_D_DIR@@/pluto onestop
		;;
	    namespaces )
		echo "Redirecting to: namespaces direct stop via ipsec whack --shutdown"
		ipsec whack --shutdown
		ip xfrm state flush
		ipsec --stopnflog > /dev/null
		;;
	    "" )
		what="ipsec whack --shutdown"
		echo "Redirecting to: ${what} [stop manually]"
		${what}
		;;
	    * )
		echo "Unknown init system ${initsystem} in use - aborted"
		exit 3
		;;
	esac

	# linux_START
	# Flush XFRM state before starting pluto
	[ -f /proc/sys/net/core/xfrm_acq_expires ] && ip xfrm state flush && ip xfrm policy flush
	# linux_STOP

	# Cleaning up backup resolv.conf
	if [ -e ${LIBRESWAN_RESOLV_CONF} ]; then
	    if grep 'Libreswan' ${ORIG_RESOLV_CONF} > /dev/null 2>&1; then
		cp ${LIBRESWAN_RESOLV_CONF} ${ORIG_RESOLV_CONF}
	    fi
	    rm -f  ${LIBRESWAN_RESOLV_CONF}
	fi
	exit 0
	;;

    status|--status)
	case "${initsystem}" in
	    systemd )
		echo "Redirecting to: systemctl status ipsec.service"
		exec systemctl status ipsec.service
		;;
	    rhsysv )
		echo "Redirecting to: service ipsec status"
		exec service ipsec status
		;;
	    upstart )
		echo "Redirecting to: status ipsec"
		exec status ipsec
		;;
	    openrc )
		echo "Redirecting to: rc-service ipsec status"
		exec rc-service ipsec status
		;;
	    sysvinit )
		echo "Redirecting to: @@INIT_D_DIR@@/ipsec status"
		exec @@INIT_D_DIR@@/ipsec status
		;;
	    rc.d )
		echo "Redirecting to: @@RC_D_DIR@@/pluto onestatus"
		exec @@RC_D_DIR@@/pluto onestatus
		;;
	    * )
		echo "Unknown init system ${initsystem} in use - aborted"
		exit 3
		;;
	esac
	exit 0
	;;

    restart|--restart)
	# assumes preparations for running have already been done,
	# as service should be running now
	case "${initsystem}" in
	    systemd )
		echo "Redirecting to: systemctl restart ipsec.service"
		exec systemctl restart ipsec.service
		;;
	    rhsysv )
		echo "Redirecting to: service ipsec restart"
		exec service ipsec restart
		;;
	    upstart )
		echo "Redirecting to: restart ipsec"
		exec restart ipsec
		;;
	    openrc )
		echo "Redirecting to: rc-service ipsec restart"
		exec rc-service ipsec restart
		;;
	    sysvinit )
		echo "Redirecting to: @@INIT_D_DIR@@/ipsec restart"
		exec @@INIT_D_DIR@@/ipsec restart
		;;
	    docker )
		echo "Redirecting to: @@INIT_D_DIR@@/ipsec restart"
		exec @@INIT_D_DIR@@/ipsec restart
		;;
	    rc.d )
		echo "Redirecting to: @@RC_D_DIR@@/pluto onerestart"
		exec @@RC_D_DIR@@/pluto onerestart
		;;
	    namespaces )
		echo "Redirecting to: namespaces"
		ipsec whack --shutdown
		exec ipsec pluto --config @@IPSEC_CONF@@ --leak-detective
		;;
	    "" )
		echo "Redirecting to: [stop start manually]"
		${0} stop
		${0} start
		exit 0
		;;
	    * )
		echo "Unknown init system ${initsystem} in use - aborted"
		exit 3
		;;
	esac
	exit 0
	;;

    *)
	echo "Usage: {--start|--stop|--restart|--status}" >&2
	exit 2
esac

exit 0
