# Makefile.in generated by automake 1.6.3 from Makefile.am.
# @configure_input@

# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# Copyright (C) 1998 Steve Borho <steve@borho.org>
#  
# This file is free software; as a special exception the author gives
# unlimited permission to copy and/or distribute it, with or without 
# modifications, as long as this notice is preserved.
# 
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
SHELL = @SHELL@

srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@

bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..

ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@

am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_HEADER = $(INSTALL_DATA)
transform = @program_transform_name@
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_alias = @host_alias@
host_triplet = @host@

EXEEXT = @EXEEXT@
OBJEXT = @OBJEXT@
PATH_SEPARATOR = @PATH_SEPARATOR@
AMTAR = @AMTAR@
AWK = @AWK@
CC = @CC@
DEPDIR = @DEPDIR@
EJECT_CMD = @EJECT_CMD@
GFXFLAGS = @GFXFLAGS@
GFXLIBS = @GFXLIBS@
GTK_CFLAGS = @GTK_CFLAGS@
GTK_LIBS = @GTK_LIBS@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LIBPL_INC_PATH = @LIBPL_INC_PATH@
LIBPL_LIBS = @LIBPL_LIBS@
LN_S = @LN_S@
MOUNT_CMD = @MOUNT_CMD@
PACKAGE = @PACKAGE@
RANLIB = @RANLIB@
STRIP = @STRIP@
UMOUNT_CMD = @UMOUNT_CMD@
VERSION = @VERSION@
XCFLAGS = @XCFLAGS@
XLFLAGS = @XLFLAGS@
XLIBS = @XLIBS@
XMESSAGE = @XMESSAGE@
X_CFLAGS = @X_CFLAGS@
X_EXTRA_LIBS = @X_EXTRA_LIBS@
X_LIBS = @X_LIBS@
X_PRE_LIBS = @X_PRE_LIBS@
am__include = @am__include@
am__quote = @am__quote@
install_sh = @install_sh@
mountsdir = @mountsdir@
pixmapdir = @pixmapdir@

SUBDIRS = EXTRAS

EXTRA_DIST = XPM/logo.xpm XPM/mount.xpm XPM/tile.xpm XPM/button.xpm

AUTOMAKE_OPTIONS = no-dependencies

mexecbindir = @mountsdir@
mpixmapdir = @pixmapdir@

mexecbin_PROGRAMS = mount.app mount.conf

INCLUDES = @LIBPL_INC_PATH@ @XCFLAGS@

mount_app_SOURCES = mount.c mount.h fstab.c properties.c external.c globals.c

mount_conf_SOURCES = config.c mount.h fstab.c properties.c globals.c

mount_app_LDADD = @LIBPL_LIBS@ @XLFLAGS@ @XLIBS@ @X_EXTRA_LIBS@ @GFXLIBS@
mount_conf_LDADD = @LIBPL_LIBS@ @GTK_LIBS@ @GFXLIBS@ @X_EXTRA_LIBS@

CFLAGS = @CFLAGS@ @GTK_CFLAGS@ @GFXFLAGS@
subdir = src
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
mexecbin_PROGRAMS = mount.app$(EXEEXT) mount.conf$(EXEEXT)
PROGRAMS = $(mexecbin_PROGRAMS)

am_mount_app_OBJECTS = mount.$(OBJEXT) fstab.$(OBJEXT) \
	properties.$(OBJEXT) external.$(OBJEXT) globals.$(OBJEXT)
mount_app_OBJECTS = $(am_mount_app_OBJECTS)
mount_app_DEPENDENCIES =
mount_app_LDFLAGS =
am_mount_conf_OBJECTS = config.$(OBJEXT) fstab.$(OBJEXT) \
	properties.$(OBJEXT) globals.$(OBJEXT)
mount_conf_OBJECTS = $(am_mount_conf_OBJECTS)
mount_conf_DEPENDENCIES =
mount_conf_LDFLAGS =

DEFS = @DEFS@
DEFAULT_INCLUDES =  -I. -I$(srcdir) -I$(top_builddir)
CPPFLAGS = @CPPFLAGS@
LDFLAGS = @LDFLAGS@
LIBS = @LIBS@
depcomp =
am__depfiles_maybe =
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
DIST_SOURCES = $(mount_app_SOURCES) $(mount_conf_SOURCES)

RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
	uninstall-info-recursive all-recursive install-data-recursive \
	install-exec-recursive installdirs-recursive install-recursive \
	uninstall-recursive check-recursive installcheck-recursive
DIST_COMMON = Makefile.am Makefile.in
DIST_SUBDIRS = $(SUBDIRS)
SOURCES = $(mount_app_SOURCES) $(mount_conf_SOURCES)

all: all-recursive

.SUFFIXES:
.SUFFIXES: .c .o .obj
$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  src/Makefile
Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
mexecbinPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
install-mexecbinPROGRAMS: $(mexecbin_PROGRAMS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(mexecbindir)
	@list='$(mexecbin_PROGRAMS)'; for p in $$list; do \
	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
	  if test -f $$p \
	  ; then \
	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
	   echo " $(INSTALL_PROGRAM_ENV) $(mexecbinPROGRAMS_INSTALL) $$p $(DESTDIR)$(mexecbindir)/$$f"; \
	   $(INSTALL_PROGRAM_ENV) $(mexecbinPROGRAMS_INSTALL) $$p $(DESTDIR)$(mexecbindir)/$$f; \
	  else :; fi; \
	done

uninstall-mexecbinPROGRAMS:
	@$(NORMAL_UNINSTALL)
	@list='$(mexecbin_PROGRAMS)'; for p in $$list; do \
	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
	  echo " rm -f $(DESTDIR)$(mexecbindir)/$$f"; \
	  rm -f $(DESTDIR)$(mexecbindir)/$$f; \
	done

clean-mexecbinPROGRAMS:
	-test -z "$(mexecbin_PROGRAMS)" || rm -f $(mexecbin_PROGRAMS)
mount.app$(EXEEXT): $(mount_app_OBJECTS) $(mount_app_DEPENDENCIES) 
	@rm -f mount.app$(EXEEXT)
	$(LINK) $(mount_app_LDFLAGS) $(mount_app_OBJECTS) $(mount_app_LDADD) $(LIBS)
mount.conf$(EXEEXT): $(mount_conf_OBJECTS) $(mount_conf_DEPENDENCIES) 
	@rm -f mount.conf$(EXEEXT)
	$(LINK) $(mount_conf_LDFLAGS) $(mount_conf_OBJECTS) $(mount_conf_LDADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT) core *.core

distclean-compile:
	-rm -f *.tab.c

.c.o:
	$(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<

.c.obj:
	$(COMPILE) -c `cygpath -w $<`
uninstall-info-am:

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@set fnord $$MAKEFLAGS; amf=$$2; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@set fnord $$MAKEFLAGS; amf=$$2; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done

ETAGS = etags
ETAGSFLAGS =

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)$$tags$$unique" \
	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

top_distdir = ..
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)

distdir: $(DISTFILES)
	$(mkinstalldirs) $(distdir)/XPM
	@list='$(DISTFILES)'; for file in $$list; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkinstalldirs) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d $(distdir)/$$subdir \
	    || mkdir $(distdir)/$$subdir \
	    || exit 1; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$(top_distdir)" \
	        distdir=../$(distdir)/$$subdir \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-recursive
all-am: Makefile $(PROGRAMS)
installdirs: installdirs-recursive
installdirs-am:
	$(mkinstalldirs) $(DESTDIR)$(mexecbindir)

install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-mexecbinPROGRAMS mostlyclean-am

distclean: distclean-recursive

distclean-am: clean-am distclean-compile distclean-generic \
	distclean-tags

dvi: dvi-recursive

dvi-am:

info: info-recursive

info-am:

install-data-am:

install-exec-am: install-mexecbinPROGRAMS

install-info: install-info-recursive

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-recursive

maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-compile mostlyclean-generic

uninstall-am: uninstall-info-am uninstall-mexecbinPROGRAMS

uninstall-info: uninstall-info-recursive

.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \
	clean-generic clean-mexecbinPROGRAMS clean-recursive distclean \
	distclean-compile distclean-generic distclean-recursive \
	distclean-tags distdir dvi dvi-am dvi-recursive info info-am \
	info-recursive install install-am install-data install-data-am \
	install-data-recursive install-exec install-exec-am \
	install-exec-recursive install-info install-info-am \
	install-info-recursive install-man install-mexecbinPROGRAMS \
	install-recursive install-strip installcheck installcheck-am \
	installdirs installdirs-am installdirs-recursive \
	maintainer-clean maintainer-clean-generic \
	maintainer-clean-recursive mostlyclean mostlyclean-compile \
	mostlyclean-generic mostlyclean-recursive tags tags-recursive \
	uninstall uninstall-am uninstall-info-am \
	uninstall-info-recursive uninstall-mexecbinPROGRAMS \
	uninstall-recursive

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
