%
% Copyright (c) 2003 by Stefan Kurtz and The Institute for
% Genomic Research.  This is OSI Certified Open Source Software.
% Please see the file LICENSE for licensing information and
% the file ACKNOWLEDGEMENTS for names of contributors to the
% code base.
%

\documentclass[12pt]{article}
\usepackage{a4,alltt,xspace,times}
\usepackage{skaff}
\usepackage{optionman}
\newcommand{\MMthree}{\texttt{maxmat3}\xspace}
\newcommand{\MUM}[0]{\textit{MUM}\xspace}
\newcommand{\Ignore}[1]{}
\newcommand{\Subs}[3]{#1[#2\ldots#3]}
\newcommand{\Match}[3]{(#3,#1,#2)}

\author{Stefan Kurtz\thanks{\SKaffiliation} \thanks{Minor alterations
  made by Adam Phillippy, The Institute for Genomic Research}}

\title{\textbf{A Program to find Maximal Matches}\\
       \textbf{in Large Sequences}\\[2mm]
       \textbf{Manual}\footnote{\copyright Stefan Kurtz and The
       Institute for Genomic Research}}

\begin{document}
\maketitle

\MMthree is a program to find maximal matches of some minimum length 
between a reference-sequence and a query-sequence.  It also allows for
the computation of \MUM-candidates as well as \MUM{s}. This document
describes the options of \MMthree and the output format. In Section 
\ref{SecBasicNotions}, we formally define some basic notions to clarify
the semantics of \MMthree. However, the reader should be able to understand 
the manual without reading that section. In the following, the notion
\emph{match}  always refers to \emph{maximal matches} if not stated
otherwise.

\section{The Program and its Options}

The program is called as follows:

$\MMthree~~[\mathit{options}]~~\mathit{referencefile}~~
           \mathit{queryfile}_{1}~~\cdots~~\mathit{queryfile}_{n}$

And here is a description of the options:

\begin{list}{}{}

\Option{mum}{}{
Compute \MUM{s}, i.e.\ matches that are unique in both sequences.
}

\Option{mumreference}{}{
Compute \MUM-candidates, i.e.\ matches that are unique
in the reference-sequence but not necessarily in the query-sequence.
}

\Option{maxmatch}{}{
Compute all maximal matches, regardless of their uniqueness.
}

\Option{n}{}{
Only match the characters $a$, $c$, $g$, or $t$. They can be either 
in upper or in lower case.
}

\Option{l}{$q$}{
Set the minimum length $q$ of a match to be reported. $q$ must be a 
positive integer. Only matches of length at least $q$ are reported. 
If this option is not used, then the default value for $q$ is 20.
}

\Option{b}{}{
Compute direct matches and reverse complement matches.
}

\Option{r}{}{
Only compute reverse complement matches.
}

\Option{s}{}{
Show the matching substring.
}

\Option{c}{}{
Report the query-position of a reverse complement match
relative to the original query-sequence. Suppose \(x\) is the 
reference-sequence and \(y\) is the query-sequence. By definition, a
reverse complement match \(\Match{i}{j}{l}\) of \(x\) and \(y\) is a
match of \(x\) and \(\overline{y}\), where \(\overline{y}\) is the
reverse complement of \(y\), see Section \ref{SecBasicNotions}. By
default, a match is reported as a triple
\begin{alltt}
i        j        l
\end{alltt}
Position \(j\) is relative to \(\overline{y}\). With this option,
not \(j\) but \(m-j+1\) is reported, where \(m\) is the length of the 
query-sequence. Now note that position \(m-j+1\) in \(y\) corresponds 
to position \(j\) in \(\overline{y}\).
}

\Option{F}{}{
Forces 4 column output format regardless of the number of reference
sequence inputs, i.e. prefixes every output match with its reference
sequence identifier.
}

\Option{L}{}{
Show the length of the query-sequence on the header line.
}

\Option{h}{}{
Show the possible options and exit.
}
\Option{help}{}{
Show the possible options and exit.
}

\end{list}

Options \Showoption{mum}, \Showoption{mumreference} and
\Showoption{maxmatch} cannot be combined. If none of these options are
used, then the program will default to \Showoption{mumreference}.

Option \Showoption{b} and \Showoption{r} exclude each other. If none
of these two options is used, then only direct matches are reported.
Option \Showoption{c} can only be used in combination with
option \Showoption{b} or option \Showoption{r}.

There must be exactly one reference-file given and at least one
query-file. The maximum number of query-files is 32.
The reference-file and the query-files must be in multiple fasta format.
The query-files are processed one after the other. The uniqueness condition
for the \MUM{s} refers to the entire set of reference-sequences but
only to one query-sequence. That is, if a \MUM is reported, the
matching substring is unique in all reference-sequences and in the currently
processed query-sequence. The uniqueness does not necessarily extend to
all query-sequences.

Input sequences can be over any set of lower or upper case
characters. Thus DNA sequences as well as protein sequences are allowed.
The characters are processed case insensitive. That is, a 
lower case character is identified with the corresponding upper case 
character. The sequence output via option \Showoption{s} is always
in lower case. If option \Showoption{n} is used,
then all characters except for $a$, $c$, $g$, and $t$ are replaced by
a unique character which is different for the reference-sequences and
the query-sequences. This prevents false matches involving, for
example, the wildcard symbols $s$, $w$, $r$, $y$, $m$, $k$, $b$, 
$d$, $h$, $v$, and $n$ often occurring in DNA sequences.
We therefore recommend to use the option \Showoption{n}.

\section{Output format}
Suppose we have two fasta files \texttt{Data/U89959} and
\texttt{Data/at.est}. The first file contains a complete BAC-sequence from
Arabidopsis thaliana, while the second is a collection of 
ESTs from the same organism. We want to use the first file as our
reference-file and the second as out query-file.

Now let us look for direct matches and reverse complement
matches in the reference and in the query sequences.
The length of the matches should be at least 18 (options \Showoption{b} 
and \Showoption{l} 18). 
We want to report the following:
\begin{itemize}
\item
the length of the query-sequences (option \Showoption{L})
\item
the matching sequence (option \Showoption{s})
\item
the query-positions relative to the original sequence 
(option \Showoption{c}). 
\end{itemize}
We also do not want to report matches involving wildcards 
(option \Showoption{n}). The corresponding program call is as follows:

\begin{verbatim}
maxmat3.x -b -l 18 -L -s -c -n Data/U89959 Data/at.est
\end{verbatim}

Here is a part of the output:

\begin{small}
\begin{verbatim}
# reading input file "Data/U89959" of length 106973
# construct suffix tree for sequence of length 106973
# (maximal input length is 536870908)
# process 1725 characters per dot
# ..............................................................
# CONSTRUCTIONTIME maxmat3.x Data/U89959 0.11
# reading input file "Data/at.est" of length 772376
# matching query-file "Data/at.est"
# against reference-file "Data/U89959"
> gi|5587835|gb|AF078689.1|AF078689  Len = 275
   90201       258        18
taaaaaaaaaaaaaaaaa
   52836       258        18
taaaaaaaaaaaaaaaaa
> gi|5587835|gb|AF078689.1|AF078689 Reverse  Len = 275
> gi|4714033|dbj|C99914.1|C99914  Len = 628
> gi|4714033|dbj|C99914.1|C99914 Reverse  Len = 628
> gi|4714032|dbj|C99913.1|C99913  Len = 497
> gi|4714032|dbj|C99913.1|C99913 Reverse  Len = 497
> gi|4714031|dbj|C99911.1|C99911  Len = 661
> gi|4714031|dbj|C99911.1|C99911 Reverse  Len = 661
> gi|4714030|dbj|C99910.1|C99910  Len = 241
    5066        23        19
agaagaagaagaagaagaa
    5069        23        19
agaagaagaagaagaagaa
    5072        23        19
agaagaagaagaagaagaa
    5075        23        19

.....

> gi|2763999|gb|R30040.1|R30040  Len = 475
> gi|2763999|gb|R30040.1|R30040 Reverse  Len = 475
# COMPLETETIME maxmat3.x Data/U89959 1.64
# SPACE maxmat3.x Data/U89959 2.71
\end{verbatim}
\end{small}

The lines starting with the symbol \texttt{\symbol{35}} report some useful
information about the matching process. They tell which files are input
and the length of the scanned sequences. They also report
the used computational resources, i.e.\ the time required for 
constructing the suffix tree, the total time of the matching process 
(in seconds) and the space requirement (in megabytes). 
The line starting with
\texttt{\symbol{35}} and containing only dots shows the progress of the
suffix tree construction. This is useful to estimate the remaining
running time for very long sequences.

For each query-sequence the corresponding header line is (up to the 
first white-space character) reported in a line beginning with the 
symbol \texttt{\symbol{62}}. The length of the
query-sequence appears at the end of such a line. Below the header line 
all matches against the corresponding query sequence 
are reported as a triple of three numbers. 
\begin{itemize}
\item
The first number is the position of the match in the reference-sequence.
\item
The second number is the position of the match in the query-sequence.
\item
The third number is the length of the match. 
\end{itemize}
Reverse complement matches are reported after a header line containing the 
keyword \texttt{Reverse}. A matching sequence is reported in 
a separate line following the line containing the positions and the 
length of the match.  

If the reference-file is a multiple fasta file with more than one
sequence, then it is necessary to also report the header line of the
reference-sequence and the position of the match relative to the start
of the reference-sequence.  This leads to a slightly different format
where each line containing the positions is prepended by the header of
the reference-sequence (also available with the \Showoption{F}
option). This format is shown in the following example, where we use
two files containing protein sequences: The file \texttt{Data/prot1}
is a file containing one protein sequence, while \texttt{Data/prot2}
contains many protein sequences: We use \texttt{Data/prot2} as our
reference-file and \texttt{Data/prot1} as our query-file:

\begin{verbatim}
maxmat3.x -L -l 7 Data/prot2 Data/prot1
\end{verbatim}

The output is as follows:

\begin{small}
\begin{verbatim}
# reading input file "Data/prot2" of length 40839
# construct suffix tree for sequence of length 40839
# (maximum input length is 536870908)
# CONSTRUCTIONTIME maxmat3.x Data/prot2 0.02
# reading input file "Data/prot1" of length 45543
# matching query-file "Data/prot1"
# against reference-file "Data/prot2"
> some_collection  Len = 45543
  sp|ALL2_BOVIN|ALLERGEN                        139      1155   7
  sp|ALG3_YEAST|PUTATIVE                        425      2904   7
  sp|ALF_TRYBB|FRUCTOSE-BISPHOSPHATE            177      4794   7
  sp|ALGB_YEAST|ALG11                           114     12599   7
  sp|ALR_SYNY3|ALANINE                          354     33261   7
  sp|ALGB_PSEAE|ALGINATE                        212     40991   7
  sp|ALGB_PSEAE|ALGINATE                        314     41093   7
  sp|ALGB_PSEAE|ALGINATE                        360     41138   7
  sp|ALR_SYNY3|ALANINE                          79      44186   7
  sp|ALP_CEPAC|ALKALINE                         366     45304   7
# COMPLETETIME maxmat3.x Data/prot2 0.06
# SPACE maxmat3.x Data/prot2 0.56
\end{verbatim}
\end{small}

\section{Basic Notions}\label{SecBasicNotions}
We assume that \(x\) is a sequence of length \(n\geq 1\) over some 
alphabet \(\Sigma\).
$x[i]$ denotes the character at position $i$ in $x$,
for $i\in[1,n]$. For $i\leq j$, $\Subs{x}{i}{j}$ denotes the 
substring of $x$ starting with the character at position $i$
and ending with the character at position $j$ in \(x\). If \(i>j\), then 
\(\Subs{x}{i}{j}\) is the empty sequence.

Let \(y\) be a sequence of length \(m\). In this document we refer to
\(x\) as the \emph{reference-sequence} and to \(y\) as the 
\emph{query-sequence}.
Let \(\ell>0\), \(i\in[1,n-\ell+1]\), and \(j\in[1,m-\ell+1]\).
\(\Match{i}{j}{\ell}\) is a \emph{match} of \(x\) and \(y\) if and only if
\(\Subs{x}{i}{i+\ell-1}=\Subs{y}{j}{j+\ell-1}\).
\(\ell\) is the \emph{length of the match} and \(\Subs{x}{i}{i+\ell-1}\)
is the \emph{matching substring}. Note that a match is contained in a 
longer match if the characters to the left or to the right of the 
occurrences in \(x\) and \(y\) are identical. To reduce redundancy, 
we restrict attention to maximal matches.
A match \(\Match{i}{j}{\ell}\) of \(x\) and \(y\) is \emph{maximal} if 
and only if the following holds:
\begin{itemize}
\item
\(i=1\) or \(j=1\) or \(x[i-1]\neq y[j-1]\)\hfill(left maximality)
\item
\(i+\ell=n+1\) or \(j+\ell=m+1\) or \(x[i+\ell]\neq 
y[j+\ell]\)\hfill(right maximality)
\end{itemize}
A \emph{maximal unique match} of \(x\) and \(y\) (\MUM for short) is a 
maximal match \(\Match{i}{j}{\ell}\) of \(x\) and \(y\) such that the 
matching substring \(\Subs{x}{i}{i+\ell-1}\)
occurs exactly once in \(x\) and once in \(y\). A \emph{\MUM-candidate} 
is a maximal match \(\Match{i}{j}{l}\) of \(x\) and \(y\) 
such that the matching substring 
\(\Subs{x}{i}{i+\ell-1}\) occurs exactly once in \(x\). Note that 
any \MUM is also a \MUM-candidate, but not vice versa, since for a
\MUM-candidate the matching substring may occur more than once in \(y\).

If \(\Sigma\) is the DNA alphabet with the characters \(a,c,g,t\), then we 
define a function \(wcc\) over \(\Sigma\) by the following equations:
\begin{eqnarray*}
wcc(a)&=&t\\
wcc(g)&=&c\\
wcc(c)&=&g\\
wcc(t)&=&a
\end{eqnarray*}
The reverse complement of 
a DNA-sequence \(u=\Subs{u}{1}{k}\) is the sequence
\[wcc(u[k])wcc(u[k-1])\ldots wcc(u[2])wcc(u[1])\]
denoted by \(\overline{u}\).
A \emph{reverse complement match} of \(x\) and \(y\) is a 
match of \(x\) and \(\overline{y}\). The notion of maximality 
naturally extends to reverse complement matches. To distinguish reverse
complement matches from matches we often call the latter direct matches.
\end{document}
