#!@@PERL@@
# -*- perl -*-
# vim: sts=4 sw=4 ts=8

# Docs at the bottom

use strict;
use warnings;

use File::Basename;
use Carp;
use POSIX;
use Munin::Plugin;
use MIME::Base64;
use Storable qw(nfreeze thaw);

# Hardcoded pollinterval of 300 seconds
my $poll_interval = 300;

# Graph width defaults to 400 in Munin 1.4
my $graph_width = $ENV{'graph_width'} ? $ENV{'graph_width'} : 400;

# Should lables be trimmed to fit graph width?
my $trim_labels = $ENV{'trim_labels'};

my $plugin_name = $Munin::Plugin::me;

# Check for multigraph capabilities
need_multigraph();

# Handle munin 'autoconf' command
do_autoconf() if ( $ARGV[0] && $ARGV[0] eq 'autoconf' );

# Fetch current counter values
my %cur_diskstats = fetch_device_counters();

# Weed out unwanted devices
filter_device_list( \%cur_diskstats );

# Handle munin 'config' command
# This can only be done after getting the device data
if ( defined $ARGV[0] && $ARGV[0] eq 'config' ) {
    do_config();
}

# Restore data from previous run
my ( $prev_time, %prev_diskstats ) = choose_old_state();

# Persist state from current run
add_new_state( time(), %cur_diskstats );

# Probably the first run for the given device, we need state to do our job,
# so let's wait for the next run.
exit if ( not defined $prev_time or not %prev_diskstats );

# Here happens the magic
generate_multigraph_data( $prev_time, \%prev_diskstats, \%cur_diskstats );

exit 0;

########
# SUBS #
########

# generate_multigraph_data
#
# Creates the data which is needed by munin's fetch command

sub generate_multigraph_data {

    my ( $prev_time, $prev_diskstats, $cur_diskstats ) = @_;

    my %results;

    for my $device ( keys %{$cur_diskstats} ) {
        $results{$device} =
          calculate_values( $prev_time, $prev_diskstats{$device},
            $cur_diskstats{$device} );
    }

    print_values_root( \%results );

    for my $device ( keys %results ) {
        print_values_device( $device, $results{$device} );
    }
    return;
}

# choose_old_state
#
# Look through the list of old states and choose the one which is closest
# to the poll interval

sub choose_old_state {

    my (%states) = restore_state();

    return unless ( keys %states );

    my $now = time();

    my $old_delta;
    my $return_timestamp;

    for my $timestamp ( sort keys %states ) {

        # Calculate deviation from ideal interval
        my $delta = abs( $now - $timestamp - $poll_interval );

        # Safe initial delta
        $old_delta = $delta + 1 unless defined $old_delta;

        # Bail out and use previous result if it was closer to the interval
        last if ( $delta > $old_delta );

        $old_delta        = $delta;
        $return_timestamp = $timestamp;
    }
    return $return_timestamp,
      %{ thaw decode_base64 $states{$return_timestamp} };
}

# add_new_state
#
# Add the current state to the list of states
# Discard any state that is noticeable older than the poll interval

sub add_new_state {
    my ( $cur_time, %cur_diskstats ) = @_;

    my (%states) = restore_state();
    my $now = time();

    for my $timestamp ( sort keys %states ) {
        last if ( ( $now - $timestamp ) <= $poll_interval * 1.5 );
        delete $states{$timestamp};
    }

    # FIXME: There ought to be a better way to do this.
    $states{$cur_time} = encode_base64 nfreeze \%cur_diskstats;

    save_state(%states);
    return;
}

# calculate_values
#
# Calculates all data that get's graphed

sub calculate_values {
    my ( $prev_time, $prev_stats, $cur_stats ) = @_;

    my $bytes_per_sector = 512;

    my $interval = time() - $prev_time;

    my $read_ios  = $cur_stats->{'rd_ios'} - $prev_stats->{'rd_ios'};
    my $write_ios = $cur_stats->{'wr_ios'} - $prev_stats->{'wr_ios'};

    my $rd_ticks = $cur_stats->{'rd_ticks'} - $prev_stats->{'rd_ticks'};
    my $wr_ticks = $cur_stats->{'wr_ticks'} - $prev_stats->{'wr_ticks'};

    my $rd_sectors = $cur_stats->{'rd_sectors'} - $prev_stats->{'rd_sectors'};
    my $wr_sectors = $cur_stats->{'wr_sectors'} - $prev_stats->{'wr_sectors'};

    my $tot_ticks = $cur_stats->{'tot_ticks'} - $prev_stats->{'tot_ticks'};

    my $read_io_per_sec  = $read_ios / $interval;
    my $write_io_per_sec = $write_ios / $interval;

    my $read_bytes_per_sec  = $rd_sectors / $interval * $bytes_per_sector;
    my $write_bytes_per_sec = $wr_sectors / $interval * $bytes_per_sector;

    my $total_ios         = $read_ios + $write_ios;
    my $total_ios_per_sec = $total_ios / $interval;

    # Utilization - or "how busy is the device"?
    # If the time spent for I/O was close to 1000msec for
    # a given second, the device is nearly 100% saturated.
    my $utilization = $tot_ticks / $interval;

    # Average time an I/O takes on the block device
    my $servicetime_in_sec =
      $total_ios_per_sec ? $utilization / $total_ios_per_sec / 1000 : 0;

    # Average wait time for an I/O from start to finish
    # (includes queue times et al)
    my $average_wait_in_sec =
      $total_ios ? ( $rd_ticks + $wr_ticks ) / $total_ios / 1000 : 0;
    my $average_rd_wait_in_sec = $read_ios  ? $rd_ticks / $read_ios / 1000  : 0;
    my $average_wr_wait_in_sec = $write_ios ? $wr_ticks / $write_ios / 1000 : 0;

    my $average_rd_rq_size_in_kb =
      $read_ios ? $rd_sectors * $bytes_per_sector / 1000 / $read_ios : 0;
    my $average_wr_rq_size_in_kb =
        $write_ios
      ? $wr_sectors * $bytes_per_sector / 1000 / $write_ios
      : 0;

    my $util_print = $utilization / 10;

    return {
        utilization              => $util_print,
        servicetime              => $servicetime_in_sec,
        average_wait             => $average_wait_in_sec,
        average_rd_wait          => $average_rd_wait_in_sec,
        average_wr_wait          => $average_wr_wait_in_sec,
        read_bytes_per_sec       => $read_bytes_per_sec,
        write_bytes_per_sec      => $write_bytes_per_sec,
        read_io_per_sec          => $read_io_per_sec,
        write_io_per_sec         => $write_io_per_sec,
        average_rd_rq_size_in_kb => $average_rd_rq_size_in_kb,
        average_wr_rq_size_in_kb => $average_wr_rq_size_in_kb,
    };

}

# print_values_root
#
# Return multigraph values for root graphs

sub print_values_root {

    my ($result) = @_;

    print "multigraph ${plugin_name}_latency\n";

    for my $device ( keys %{$result} ) {

        next unless ( $cur_diskstats{$device}->{'does_latency'} );
        my $graph_id = $cur_diskstats{$device}->{'graph_id'};

        print "${graph_id}_avgwait.value "
          . $result->{$device}->{'average_wait'} . "\n";
    }

    print "\nmultigraph ${plugin_name}_utilization\n";

    for my $device ( keys %{$result} ) {

        next unless ( $cur_diskstats{$device}->{'does_latency'} );
        my $graph_id = $cur_diskstats{$device}->{'graph_id'};

        print "${graph_id}_util.value "
          . $result->{$device}->{'utilization'} . "\n";
    }

    print "\nmultigraph ${plugin_name}_throughput\n";

    for my $device ( keys %{$result} ) {
        my $graph_id = $cur_diskstats{$device}->{'graph_id'};
        print "${graph_id}_rdbytes.value "
          . $result->{$device}->{'read_bytes_per_sec'} . "\n";
        print "${graph_id}_wrbytes.value "
          . $result->{$device}->{'write_bytes_per_sec'} . "\n";
    }

    print "\nmultigraph ${plugin_name}_iops\n";

    for my $device ( keys %{$result} ) {
        my $graph_id = $cur_diskstats{$device}->{'graph_id'};
        print "${graph_id}_rdio.value "
          . $result->{$device}->{'read_io_per_sec'} . "\n";
        print "${graph_id}_wrio.value "
          . $result->{$device}->{'write_io_per_sec'} . "\n";
    }
    return;
}

# print_values_device
#
# Return multigraph values for device graphs

sub print_values_device {

    my ( $device, $result ) = @_;
    my $graph_id = $cur_diskstats{$device}->{'graph_id'};

    if ( $cur_diskstats{$device}->{'does_latency'} ) {
        print <<"EOF";

multigraph ${plugin_name}_latency.$graph_id
svctm.value $result->{'servicetime'}
avgwait.value $result->{'average_wait'}
avgrdwait.value $result->{'average_rd_wait'}
avgwrwait.value $result->{'average_wr_wait'}

multigraph ${plugin_name}_utilization.$graph_id
util.value $result->{'utilization'}
EOF

    }

    print <<"EOF";

multigraph ${plugin_name}_throughput.$graph_id
rdbytes.value $result->{'read_bytes_per_sec'}
wrbytes.value $result->{'write_bytes_per_sec'}

multigraph ${plugin_name}_iops.$graph_id
rdio.value $result->{'read_io_per_sec'}
wrio.value $result->{'write_io_per_sec'}
avgrdrqsz.value $result->{'average_rd_rq_size_in_kb'}
avgwrrqsz.value $result->{'average_wr_rq_size_in_kb'}
EOF

    return;
}

# read_procfs
#
# Pull diskstat information from procfs

sub read_procfs {

    my $statfh;

    open $statfh, '<', '/proc/diskstats'
      or croak "Failed to open '/proc/diskstats': $!\n";

    my @lines;

    while ( my $line = <$statfh> ) {

        # Strip trailing newline and leading whitespace
        chomp $line;
        $line =~ s/^\s+//;

        my @elems = split /\s+/, $line;

        # We explicitly don't support old-style diskstats
        # There are situations where only _some_ lines (e.g.
        # partitions on older 2.6 kernels) have fewer stats
        # numbers, therefore we'll skip them silently
        if ( @elems != 14 ) {
            next;
        }
        push @lines, \@elems;
    }

    close $statfh or croak "Failed to close '/proc/diskstats': $!";
    return @lines;
}

# read_sysfs
#
# Pull diskstat information from sysfs

sub read_sysfs {

    my @devices;
    my @lines;

    @devices = glob "/sys/block/*/stat";
    @devices = map { m!/sys/block/([^/]+)/stat! } @devices;

    for my $cur_device (@devices) {
        my $stats_file = "/sys/block/$cur_device/stat";

        my $statfh;

        open $statfh, '<', $stats_file
          or croak "Failed to open '$stats_file': $!\n";

        my $line = <$statfh>;

        close $statfh or croak "Failed to close '$stats_file': $!\n";

        # Trimming whitespace
        $line =~ s/^\s+//;
        chomp $line;

        my @elems = split /\s+/, $line;

        croak "'$stats_file' doesn't contain exactly 11 values. Aborting"
          if ( @elems != 11 );

        # Translate the devicename back before storing the information
        $cur_device =~ tr#!#/#;

        # Faking missing diskstats values
        unshift @elems, ( '', '', $cur_device );

        push @lines, \@elems;
    }

    return @lines;
}

# parse_diskstats
#
# Pulls diskstat information eitehr from procfs or sysfs, parses them and provides
# helper information.

sub parse_diskstats {

    my @stats;

    if ( glob "/sys/block/*/stat" ) {

        @stats = read_sysfs();
    }
    else {
        @stats = read_procfs();
    }

    my %diskstats;

    for my $entry (@stats) {

        my %devstat;

        # Hash-Slicing for fun and profit
        @devstat{
            qw(major minor devname
              rd_ios rd_merges rd_sectors rd_ticks
              wr_ios wr_merges wr_sectors wr_ticks
              ios_in_prog tot_ticks rq_ticks)
          }
          = @{$entry};

        # Resolve devicemapper names to their LVM counterparts
        my $device = $devstat{'devname'};
        my $pretty_device;

        if ( $device =~ /^dm-\d+$/ ) {
            $pretty_device = translate_devicemapper_name($device);
        }

        $pretty_device ||= $device;

        $devstat{'pretty_device_name'} = $pretty_device;

        # Short device name only containing the stuff after the last '/'
        # for graph labels et al.

        ( $devstat{'short_pretty_device_name'} ) =
          $pretty_device =~ m#/?([^/]+)$#;

        if ($trim_labels) {

            $devstat{'pretty_device_name'} =
              trim_label( 'pos', $devstat{'pretty_device_name'} );
            $devstat{'short_pretty_device_name'} =
              trim_label( 'posneg', $devstat{'short_pretty_device_name'} );
        }

        # The graph identifier needs to be cleaned up because munin will
        # complain about strange characters in the name otherwise
        #
        # The LVM <-> device mapper id mapping isn't stable across reboots,
        # use the LVM volume name instead

        $devstat{'graph_id'} = clean_fieldname($pretty_device);

        # Does the device provide latency information?
        $devstat{'does_latency'} =
          $devstat{'rd_ticks'} + $devstat{'wr_ticks'} ? 1 : 0;

        $diskstats{ $devstat{'devname'} } = \%devstat;
    }

    return %diskstats;
}

# fetch_device_counters
#
# Filters partitions and devices without IOs from diskstats
# and returns them

sub fetch_device_counters {

    my %diskstats = parse_diskstats();

    my @valid_devices;
  DEVICE:

# We need to see the devices before the partitions to make the partition filter work
#
# Sorting by the length of the device name gives us this certainty

    for my $devname ( sort { length($a) <=> length($b) } keys %diskstats ) {

        # Remove devices without traffic
        if (   $diskstats{$devname}->{'rd_ios'} == 0
            && $diskstats{$devname}->{'wr_ios'} == 0 )
        {
            delete $diskstats{$devname};
            next DEVICE;
        }

# Filter out partitions, since we only want to track the data of the parent devices
#
# We skip:
# - sda1 -> sda
# - c0d0p1 -> c0d0
# - md1p1 -> md1
# - etherd/e1.1p1 -> etherd/e1.1
#
# But we don't want to filter:
# - dm-100 -> dm-1
# - etherd/e1.10 -> etherd/e1.1
#
# To achieve this we skip a device if
# - it looks like a device we use with a "p\d" suffix
# - it looks like a device we use with a "\d" suffix, and the device didn't
#   have a numeric suffix in the first place

        for my $valid_device (@valid_devices) {

            if (
                $devname =~ m/^${valid_device}p\d+$/
                || (   $valid_device !~ /\d$/
                    && $devname =~ m/^$valid_device\d+$/ )
              )
            {
                delete $diskstats{$devname};
                next DEVICE;
            }
        }

        push @valid_devices, $devname;
    }

    return %diskstats;
}

# translate_devicemapper_name
#
# Tries to find a devicemapper name based on a minor number
# Returns either a resolved LVM path or the original devicename

sub translate_devicemapper_name {
    my ($device) = @_;

    my ($want_minor) = $device =~ m/^dm-(\d+)$/;

    croak "Failed to extract devicemapper id" unless defined($want_minor);

    my $dm_major = find_devicemapper_major();
    croak "Failed to get device-mapper major number\n"
      unless defined $dm_major;

    for my $entry ( glob "/dev/mapper/\*" ) {

        my $rdev  = ( stat($entry) )[6];
        my $major = floor( $rdev / 256 );
        my $minor = $rdev % 256;

        if ( $major == $dm_major && $minor == $want_minor ) {

            my $pretty_name = translate_lvm_name($entry);

            $entry =~ s|/dev/||;

            return defined $pretty_name ? $pretty_name : $entry;
        }
    }

    # Return original string if the device can't be found.
    return $device;
}

# translate_lvm_name
#
# Translates devicemapper names to their nicer LVM counterparts
# e.g. /dev/mapper/VGfoo-LVbar -> /dev/VGfoo/LVbar

sub translate_lvm_name {

    my ($entry) = @_;

    my $device_name = basename($entry);

# Check for single-dash-occurence to see if this could be a lvm devicemapper device.
    if ( $device_name =~ m/(?<!-)-(?!-)/ ) {

        # split device name into vg and lv parts
        my ( $vg, $lv ) = split /(?<!-)-(?!-)/, $device_name, 2;
        return unless ( defined($vg) && defined($lv) );

        # remove extraneous dashes from vg and lv names
        $vg =~ s/--/-/g;
        $lv =~ s/--/-/g;

        $device_name = "$vg/$lv";

        # Sanity check - does the constructed device name exist?
        # Breaks unless we are root.
        if ( stat("/dev/$device_name") ) {
            return "$device_name";
        }

    }
    return;
}

# find_devicemapper_major
#
# Searches for the major number of the devicemapper device

sub find_devicemapper_major {

    my $devicefh;

    open( $devicefh, '<', '/proc/devices' )
      or croak "Failed to open '/proc/devices': $!";

    my $dm_major;

    while ( my $line = <$devicefh> ) {
        chomp $line;

        my ( $major, $name ) = split /\s+/, $line, 2;

        next unless defined $name;

        if ( $name eq 'device-mapper' ) {
            $dm_major = $major;
            last;
        }
    }
    close($devicefh);

    return $dm_major;
}

sub do_autoconf {

    my %stats;

    # Capture any croaks on the way
    if ( eval { %stats = parse_diskstats() } && keys %stats ) {

        print "yes\n";
        exit 0;
    }
    else {
        print "no\n";
        exit 1;
    }
}

sub do_config {

    do_config_root();
    do_config_device();

    exit 0;
}

# do_config_root
#
# Print the configuration for the root graphs

sub do_config_root {

    my $config_graph_width = $graph_width;

    my @sorted_devices = sort_by_dm_last( keys %cur_diskstats );

    # If we don't trim labels, we have to find the correct graph width to
    # accomodate all labels
    unless ($trim_labels) {

        my @short_labels =
          map { $cur_diskstats{$_}->{'short_pretty_device_name'} }
          keys %cur_diskstats;
        my @long_labels =
          map { $cur_diskstats{$_}->{'pretty_device_name'} }
          keys %cur_diskstats;

        my $graph_width_short =
          find_required_graph_width( 'posneg', @short_labels );
        my $graph_width_long = find_required_graph_width( 'pos', @long_labels );

        $config_graph_width =
            $graph_width_short > $graph_width_long
          ? $graph_width_short
          : $graph_width_long;
    }

    # Print config for latency

    print <<"EOF";
multigraph ${plugin_name}_latency
graph_title Disk latency per device
graph_args --base 1000
graph_vlabel Average IO Wait (seconds)
graph_category disk
graph_width $config_graph_width

EOF

    for my $device (@sorted_devices) {
        next unless $cur_diskstats{$device}->{'does_latency'};
        my $graph_id = $cur_diskstats{$device}->{'graph_id'};

        print <<"EOF";
${graph_id}_avgwait.label $cur_diskstats{$device}->{'pretty_device_name'}
${graph_id}_avgwait.type GAUGE
${graph_id}_avgwait.info Average wait time for an I/O request
${graph_id}_avgwait.min 0
${graph_id}_avgwait.draw LINE1
EOF
    }

    # Print config for utilization

    print <<"EOF";

multigraph ${plugin_name}_utilization
graph_title Utilization per device
graph_args --base 1000 --lower-limit 0 --upper-limit 100 --rigid
graph_vlabel % busy
graph_category disk
graph_width $config_graph_width
graph_scale no

EOF

    for my $device (@sorted_devices) {
        next unless $cur_diskstats{$device}->{'does_latency'};
        my $graph_id = $cur_diskstats{$device}->{'graph_id'};

        print <<"EOF";
${graph_id}_util.label $cur_diskstats{$device}->{'pretty_device_name'}
${graph_id}_util.type GAUGE
${graph_id}_util.info Utilization of the device
${graph_id}_util.min 0
${graph_id}_util.draw LINE1
EOF
    }

    # Print config for throughput

    print <<"EOF";

multigraph ${plugin_name}_throughput
graph_title Throughput per device
graph_args --base 1024
graph_vlabel Bytes/\${graph_period} read (-) / write (+)
graph_category disk
graph_width $config_graph_width
graph_info This graph shows averaged throughput for the given disk in bytes.  Higher throughput is usualy linked with higher service time/latency (separate graph).  The graph base is 1024 yeilding Kibi- and Mebi-bytes.

EOF

    for my $device (@sorted_devices) {
        my $graph_id = $cur_diskstats{$device}->{'graph_id'};

        print <<"EOF";
${graph_id}_rdbytes.label $cur_diskstats{$device}->{'short_pretty_device_name'}
${graph_id}_rdbytes.type GAUGE
${graph_id}_rdbytes.min 0
${graph_id}_rdbytes.draw LINE1
${graph_id}_rdbytes.graph no
${graph_id}_wrbytes.label $cur_diskstats{$device}->{'short_pretty_device_name'}
${graph_id}_wrbytes.type GAUGE
${graph_id}_wrbytes.min 0
${graph_id}_wrbytes.draw LINE1
${graph_id}_wrbytes.negative ${graph_id}_rdbytes
EOF
    }

    # Print config for iops

    print <<"EOF";

multigraph ${plugin_name}_iops
graph_title Disk IOs per device
graph_args --base 1000
graph_vlabel IOs/\${graph_period} read (-) / write (+) 
graph_category disk
graph_width $config_graph_width

EOF

    for my $device (@sorted_devices) {
        my $graph_id = $cur_diskstats{$device}->{'graph_id'};

        print <<"EOF";
${graph_id}_rdio.label $cur_diskstats{$device}->{'short_pretty_device_name'}
${graph_id}_rdio.type GAUGE
${graph_id}_rdio.min 0
${graph_id}_rdio.draw LINE1
${graph_id}_rdio.graph no
${graph_id}_wrio.label $cur_diskstats{$device}->{'short_pretty_device_name'}
${graph_id}_wrio.type GAUGE
${graph_id}_wrio.min 0
${graph_id}_wrio.draw LINE1
${graph_id}_wrio.negative ${graph_id}_rdio
EOF
    }
    print "\n";
    return;
}

# do_config_device
#
# Print the configuration for all device graphs

sub do_config_device {

    for my $device ( sort keys %cur_diskstats ) {

        # Nice name for graph
        my $pretty_device = $cur_diskstats{$device}->{'pretty_device_name'};
        my $graph_id      = $cur_diskstats{$device}->{'graph_id'};

        if ( $cur_diskstats{$device}->{'does_latency'} ) {

            print <<"EOF";
multigraph ${plugin_name}_latency.$graph_id
graph_title Average latency for /dev/$pretty_device
graph_args --base 1000 --logarithmic
graph_vlabel seconds
graph_category disk
graph_info This graph shows average waiting time/latency for different categories of disk operations.   The times that include the queue times indicate how busy your system is.  If the waiting time hits 1 second then your I/O system is 100% busy.

svctm.label Device IO time
svctm.type GAUGE
svctm.info Average time an I/O takes on the block device not including any queue times, just the round trip time for the disk request.
svctm.min 0
svctm.draw LINE1
avgwait.label IO Wait time
avgwait.type GAUGE
avgwait.info Average wait time for an I/O from request start to finish (includes queue times et al)
avgwait.min 0
avgwait.draw LINE1
avgrdwait.label Read IO Wait time
avgrdwait.type GAUGE
avgrdwait.info Average wait time for a read I/O from request start to finish (includes queue times et al)
avgrdwait.min 0
avgrdwait.warning 0:1
avgrdwait.draw LINE1
avgwrwait.label Write IO Wait time
avgwrwait.type GAUGE
avgwrwait.info Average wait time for a write I/O from request start to finish (includes queue times et al)
avgwrwait.min 0
avgwrwait.warning 0:1
avgwrwait.draw LINE1

EOF

            print <<"EOF";
multigraph ${plugin_name}_utilization.$graph_id
graph_title Disk utilization for /dev/$pretty_device
graph_args --base 1000 --lower-limit 0 --upper-limit 100 --rigid
graph_vlabel % busy
graph_category disk
graph_scale no

util.label Utilization
util.type GAUGE
util.info Utilization of the device in percent. If the time spent for I/O is close to 1000msec for a given second, the device is nearly 100% saturated.
util.min 0
util.draw LINE1

EOF

        }

        print <<"EOF";
multigraph ${plugin_name}_throughput.$graph_id
graph_title Disk throughput for /dev/$pretty_device
graph_args --base 1024
graph_vlabel Pr \${graph_period} read (-) / write (+)
graph_category disk
graph_info This graph shows disk throughput in bytes pr \${graph_period}.  The graph base is 1024 so KB is for Kibi bytes and so on.

rdbytes.label invisible
rdbytes.type GAUGE
rdbytes.min 0
rdbytes.draw LINE1
rdbytes.graph no
wrbytes.label Bytes
wrbytes.type GAUGE
wrbytes.min 0
wrbytes.draw LINE1
wrbytes.negative rdbytes

EOF

# Problem with the following graph: the avgwrrqsz used to be labeled
# "KiB" for KibiByte = 1024 bytes.  However the graph is 1000 based
# and is mixing units, AND it does not have "graph_scale no" set
# therefore the average request size can become milli (1000 based)
# Kibi (1024 based) bytes which is such a horrible mess to contemplate
# that we just can't allow it.

# The reason we need to keep the Kilo/Kibi part of the unit is that
# otherwise the scale of the numbers in the graph become so different
# that the graph becomes unusable.  Therefore we're keeping the K unit
# but we're making it 1000 based so that at least the K and the m are
# use the same divisor.

        print <<"EOF";
multigraph ${plugin_name}_iops.$graph_id
graph_title IOs for /dev/$pretty_device
graph_args --base 1000
graph_vlabel Units read (-) / write (+)
graph_category disk
graph_info This graph shows the number of IO operations pr second and the average size of these requests.  Lots of small requests should result in in lower throughput (separate graph) and higher service time (separate graph).  Please note that starting with munin-node 2.0 the divisor for K is 1000 instead of 1024 which it was prior to 2.0 beta 3.  This is because the base for this graph is 1000 not 1024.

rdio.label dummy
rdio.type GAUGE
rdio.min 0
rdio.draw LINE1
rdio.graph no
wrio.label IO/sec
wrio.type GAUGE
wrio.min 0
wrio.draw LINE1
wrio.negative rdio
avgrdrqsz.label dummy
avgrdrqsz.type GAUGE
avgrdrqsz.min 0
avgrdrqsz.draw LINE1
avgrdrqsz.graph no
avgwrrqsz.label Req Size (KB)
avgwrrqsz.info Average Request Size in kilobytes (1000 based)
avgwrrqsz.type GAUGE
avgwrrqsz.min 0
avgwrrqsz.draw LINE1
avgwrrqsz.negative avgrdrqsz

EOF

    }
    return;
}

# sort_by_dm_last
#
# Sort a given list, move devicemapper devices (dm-xx) to the end of the list

sub sort_by_dm_last {

    my @devices = @_;
    my $re      = qr/^dm-\d+/;
    my ( @dm, @non_dm );

    for my $device (@devices) {
        if ( $device =~ m/$re/ ) {
            push @dm, $device;
        }
        else {
            push @non_dm, $device;
        }
    }

    return ( sort @non_dm ), ( sort @dm );
}

# filter_device_list
#
# Filter unwanted devices from given hash

sub filter_device_list {

    my ($devices) = @_;

    my $include = $ENV{'include_only'};
    my $exclude = $ENV{'exclude'};

    croak
      "include_only and exclude are mutually exclusive. Please specify only one"
      if ( $include && $exclude );
    return unless ( $include || $exclude );

    my $mode = $include ? 0 : 1;

    # Pull data from environment variable
    my @filter_list =
      map { my $dev = $_; $dev =~ s!^/dev/!!; $dev; } split /\s*,\s*/,
      $include ? $include : $exclude;

    for my $device ( keys %{$devices} ) {

# Check if one of the user-provided names matches the current device-name or "pretty" LVM name
        my $match = map {
                 $device =~ m!\Q$_\E!
              || $devices->{$device}->{'pretty_device_name'} =~ m!\Q$_\E!;
        } @filter_list;

# Delete the device when it matches and mode is exclude or when it doesn't match and mode is include(_only)
        delete $devices->{$device} unless ( $match xor $mode );
    }
    return;
}

# calculate_pixels
#
# Calculates either
# the amount of available label-characters for $graph_width
# or
# the necessary $graph_width for a given label length
#
# type refers to the graph being positive only or positive/negative

sub calculate_pixels {

    my ( $mode, $type, $data ) = @_;

    # These values are probably wrong, but a good approximation
    # $graph_width + $graph_border_width == real image width
    my $graph_border_width = 97;

    # ($data_characters + $max_label_length + $padding_characters)
    # * $pixels_per_character == real image width
    my $padding_characters   = 10;
    my $pixels_per_character = 6;

    my $data_characters;

    if ( $type eq 'posneg' ) {

        # nnn.nnU/nnn.nnU_ times 4
        $data_characters = 64;
    }
    elsif ( $type eq 'pos' ) {

        # nnn.nnU_ times 4
        $data_characters = 32;
    }
    else {
        croak "Wrong $type in calculate_pixels";
    }

    my $return_data;

    if ( $mode eq 'required_width' ) {
        $return_data =
          $pixels_per_character *
          ( $padding_characters + $data_characters + $data ) -
          $graph_border_width;
    }
    elsif ( $mode eq 'available_characters' ) {
        $return_data =
          abs( ( $graph_width + $graph_border_width ) / $pixels_per_character )
          - $padding_characters - $data_characters;

    }
    else {
        croak "Wrong $mode in calculate_pixels";
    }
    return $return_data;
}

# find_required_graph_width
#
# Returns the necessary graph width for a list of labels and a type of graph

sub find_required_graph_width {

    my ( $type, @labels ) = @_;

    my $longest_label_length = 0;

    for my $label (@labels) {
        if ( length $label > $longest_label_length ) {
            $longest_label_length = length $label;
        }
    }

    my $required_graph_width =
      calculate_pixels( 'required_width', $type, $longest_label_length );
    return $graph_width if ( $required_graph_width <= $graph_width );

    # Return sufficient graph_width in 50 pixel increments
    return $graph_width +
      ( ceil( ( $required_graph_width - $graph_width ) / 50 ) * 50 );
}

# trim_label
#
# Trims a given label to it's non-wrapping size

sub trim_label {

    my ( $type, $label ) = @_;

    my $available_characters =
      calculate_pixels( 'available_characters', $type );

    if ( $available_characters < length $label ) {
        $label = '..' . substr $label, ( $available_characters - 2 ) * -1;
    }

    return $label;
}

__END__

=head1 NAME

diskstats - Munin multigraph plugin to monitor various values provided
via C</proc/diskstats> or C</sys/block/*/stat>

=head1 APPLICABLE SYSTEMS

Linux 2.6 systems with extended block device statistics enabled.

=head1 CONFIGURATION

None needed.

=head2 device-mapper names

This plugin displays nicer device-mapper device names if it is run as
root, but it functions as needed without root privilege.  To configure
for running as root enter this in a plugin configuration file:

  [diskstats]
    user root

=head2 Monitor specific devices

You can specify which devices should get monitored by the plugin via
environment variables. The variables are mutually exclusive and should
contain a comma-separated list of device names. Partial names
(e.g. 'sd' or 'dm-') are okay.

  [diskstats]
    env.include_only sda,sdb,cciss/c0d0

or

  [diskstats]
    env.exclude sdc,VGroot/LVswap

LVM volumes can be filtered either by their canonical names or their
internal device-mapper based names (e.g. 'dm-3', see dmsetup(8) for
further information).

=head2 Graph width and labels

This plugin will increase the graph_width dynamically to accomodate
longer-than-normal device names. You can disable this behavior by
setting the B<trim_labels> environment variable. Additionally, you can
specify a fixed graph_width for the graphs.

  [diskstats]
    # Set graph_width to 450, device names which are longer get trimmed
    env.trim_labels yes
    env.graph_width 450


=head1 INTERPRETATION

Among the more self-describing or well-known values like C<throughput>
(Bytes per second) there are a few which might need further
introduction.


=head2 Device Utilization

Linux provides a counter which increments in a millisecond-interval
for as long as there are outstanding I/O requests. If this counter is
close to 1000msec in a given 1 second timeframe the device is nearly
100% saturated. This plugin provides values averaged over a 5 minute
time frame per default, so it can't catch short-lived saturations, but
it'll give a nice trend for semi-uniform load patterns as they're
expected in most server or multi-user environments.


=head2 Device IO Time

The C<Device IO Time> takes the counter described under C<Device
Utilization> and divides it by the number of I/Os that happened in the
given time frame, resulting in an average time per I/O on the
block-device level.

This value can give you a good comparison base amongst different
controllers, storage subsystems and disks for similiar workloads.


=head2 Syscall Wait Time

These values describe the average time it takes between an application
issuing a syscall resulting in a hit to a blockdevice to the syscall
returning to the application.

The values are bound to be higher (at least for read requests) than
the time it takes the device itself to fulfill the requests, since
calling overhead, queuing times and probably a dozen other things are
included in those times.

These are the values to watch out for when an user complains that
C<the disks are too slow!>.


=head3 What causes a block device hit?

A non-exhaustive list:

=over

=item * Reads from files when the given range is not in the page cache or the O_DIRECT
flag is set.

=item * Writes to files if O_DIRECT or O_SYNC is set or sys.vm.dirty_(background_)ratio
is exceeded.

=item * Filesystem metadata operations (stat(2), getdents(2), file creation,
modification of any of the values returned by stat(2), etc.)

=item * The pdflush daemon writing out dirtied pages

=item * (f)sync

=item * Swapping

=item * raw device I/O (mkfs, dd, etc.)

=back

=head1 ACKNOWLEDGEMENTS

The core logic of this script is based on the B<iostat> tool of the
B<sysstat> package written and maintained by Sebastien Godard.

=head1 SEE ALSO

See C<Documentation/iostats.txt> in your Linux source tree for further
information about the C<numbers> involved in this module.

L<http://www.westnet.com/~gsmith/content/linux-pdflush.htm> has a nice
writeup about the pdflush daemon.

=head1 VERSION

  $Id$

=head1 MAGIC MARKERS

  #%# family=auto
  #%# capabilities=autoconf

=head1 AUTHOR

Michael Renner <michael.renner@amd.co.at>

=head1 LICENSE

GPLv2


=cut
