# Makefile.in generated by automake 1.11.3 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
# Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# -*- mode: makefile -*-

####################################
# Everything below here is generic #
####################################
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
	$(srcdir)/version.xml.in $(top_srcdir)/gtk-doc.make
subdir = docs/api
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/gtk-doc.m4 \
	$(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \
	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES = version.xml
CONFIG_CLEAN_VPATH_FILES =
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN   " $@;
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-dvi-recursive install-exec-recursive \
	install-html-recursive install-info-recursive \
	install-pdf-recursive install-ps-recursive install-recursive \
	installcheck-recursive installdirs-recursive pdf-recursive \
	ps-recursive uninstall-recursive
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
	distdir
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
ACLOCAL = @ACLOCAL@
ALL_LINGUAS = @ALL_LINGUAS@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
APTCC_CFLAGS = @APTCC_CFLAGS@
APTCC_LIBS = @APTCC_LIBS@
AR = @AR@
ARCHIVE_LIBS = @ARCHIVE_LIBS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BINDIR = @BINDIR@
BOX_CFLAGS = @BOX_CFLAGS@
BOX_LIBS = @BOX_LIBS@
CATALOGS = @CATALOGS@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CONNMAN_CFLAGS = @CONNMAN_CFLAGS@
CONNMAN_LIBS = @CONNMAN_LIBS@
CONSOLEKIT_DAEMON = @CONSOLEKIT_DAEMON@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DATADIR = @DATADIR@
DATADIRNAME = @DATADIRNAME@
DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@
DBUS_SYS_DIR = @DBUS_SYS_DIR@
DEFAULT_BACKEND = @DEFAULT_BACKEND@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
GIO_CFLAGS = @GIO_CFLAGS@
GIO_LIBS = @GIO_LIBS@
GLIB_CFLAGS = @GLIB_CFLAGS@
GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@
GLIB_GENMARSHAL = @GLIB_GENMARSHAL@
GLIB_LIBS = @GLIB_LIBS@
GLIB_MKENUMS = @GLIB_MKENUMS@
GMODULE_CFLAGS = @GMODULE_CFLAGS@
GMODULE_LIBS = @GMODULE_LIBS@
GMOFILES = @GMOFILES@
GMSGFMT = @GMSGFMT@
GREP = @GREP@
GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@
GSTREAMER_CFLAGS = @GSTREAMER_CFLAGS@
GSTREAMER_LIBS = @GSTREAMER_LIBS@
GTKDOC_CHECK = @GTKDOC_CHECK@
GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@
GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@
GTKDOC_MKPDF = @GTKDOC_MKPDF@
GTKDOC_REBASE = @GTKDOC_REBASE@
GUDEV_CFLAGS = @GUDEV_CFLAGS@
GUDEV_LIBS = @GUDEV_LIBS@
HTML_DIR = @HTML_DIR@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTOBJEXT = @INSTOBJEXT@
INTLLIBS = @INTLLIBS@
INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
INTLTOOL_MERGE = @INTLTOOL_MERGE@
INTLTOOL_PERL = @INTLTOOL_PERL@
INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
INTLTOOL_V_MERGE = @INTLTOOL_V_MERGE@
INTLTOOL_V_MERGE_OPTIONS = @INTLTOOL_V_MERGE_OPTIONS@
INTLTOOL__v_MERGE_ = @INTLTOOL__v_MERGE_@
INTLTOOL__v_MERGE_0 = @INTLTOOL__v_MERGE_0@
INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@
INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@
INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@
INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@
INTROSPECTION_LIBS = @INTROSPECTION_LIBS@
INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@
INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@
INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBDIR = @LIBDIR@
LIBEXECDIR = @LIBEXECDIR@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LOCALSTATEDIR = @LOCALSTATEDIR@
LTLIBOBJS = @LTLIBOBJS@
LT_AGE = @LT_AGE@
LT_CURRENT = @LT_CURRENT@
LT_QT_AGE = @LT_QT_AGE@
LT_QT_CURRENT = @LT_QT_CURRENT@
LT_QT_REVISION = @LT_QT_REVISION@
LT_REVISION = @LT_REVISION@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
MKINSTALLDIRS = @MKINSTALLDIRS@
MOC = @MOC@
MOZILLA_PLUGIN_DIR = @MOZILLA_PLUGIN_DIR@
MSGFMT = @MSGFMT@
MSGFMT_OPTS = @MSGFMT_OPTS@
MSGMERGE = @MSGMERGE@
NETWORK_MANAGER_CFLAGS = @NETWORK_MANAGER_CFLAGS@
NETWORK_MANAGER_LIBS = @NETWORK_MANAGER_LIBS@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OPKG_CFLAGS = @OPKG_CFLAGS@
OPKG_LIBS = @OPKG_LIBS@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGEKIT_USER = @PACKAGEKIT_USER@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
PK_BROWSER_PLUGIN_CFLAGS = @PK_BROWSER_PLUGIN_CFLAGS@
PK_BROWSER_PLUGIN_LIBS = @PK_BROWSER_PLUGIN_LIBS@
PK_CONF_DIR = @PK_CONF_DIR@
PK_DB_DIR = @PK_DB_DIR@
PK_GSTREAMER_PLUGIN_CFLAGS = @PK_GSTREAMER_PLUGIN_CFLAGS@
PK_GSTREAMER_PLUGIN_LIBS = @PK_GSTREAMER_PLUGIN_LIBS@
PK_GTK_MODULE_CFLAGS = @PK_GTK_MODULE_CFLAGS@
PK_GTK_MODULE_GTK2_CFLAGS = @PK_GTK_MODULE_GTK2_CFLAGS@
PK_GTK_MODULE_GTK2_LIBS = @PK_GTK_MODULE_GTK2_LIBS@
PK_GTK_MODULE_LIBS = @PK_GTK_MODULE_LIBS@
PK_LOG_DIR = @PK_LOG_DIR@
PK_MAJOR_VERSION = @PK_MAJOR_VERSION@
PK_MICRO_VERSION = @PK_MICRO_VERSION@
PK_MINOR_VERSION = @PK_MINOR_VERSION@
PK_PLUGIN_CFLAGS = @PK_PLUGIN_CFLAGS@
PK_PLUGIN_DIR = @PK_PLUGIN_DIR@
PK_PLUGIN_LIBS = @PK_PLUGIN_LIBS@
PK_VERSION = @PK_VERSION@
PK_YUM_PLUGIN_DIR = @PK_YUM_PLUGIN_DIR@
PM_UTILS_CFLAGS = @PM_UTILS_CFLAGS@
PM_UTILS_LIBS = @PM_UTILS_LIBS@
POFILES = @POFILES@
POLDEK_CFLAGS = @POLDEK_CFLAGS@
POLDEK_LIBS = @POLDEK_LIBS@
POLKIT_CFLAGS = @POLKIT_CFLAGS@
POLKIT_LIBS = @POLKIT_LIBS@
POSUB = @POSUB@
PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@
PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@
PYTHON = @PYTHON@
PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
PYTHON_PACKAGE_DIR = @PYTHON_PACKAGE_DIR@
PYTHON_PLATFORM = @PYTHON_PLATFORM@
PYTHON_PREFIX = @PYTHON_PREFIX@
PYTHON_VERSION = @PYTHON_VERSION@
QTCORE_CFLAGS = @QTCORE_CFLAGS@
QTCORE_LIBS = @QTCORE_LIBS@
QTDBUS_CFLAGS = @QTDBUS_CFLAGS@
QTDBUS_LIBS = @QTDBUS_LIBS@
QTSQL_CFLAGS = @QTSQL_CFLAGS@
QTSQL_LIBS = @QTSQL_LIBS@
QTXML_CFLAGS = @QTXML_CFLAGS@
QTXML_LIBS = @QTXML_LIBS@
RANLIB = @RANLIB@
SBINDIR = @SBINDIR@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SLAPT_CFLAGS = @SLAPT_CFLAGS@
SLAPT_LIBS = @SLAPT_LIBS@
SQLITE_CFLAGS = @SQLITE_CFLAGS@
SQLITE_LIBS = @SQLITE_LIBS@
STRIP = @STRIP@
SYSCONFDIR = @SYSCONFDIR@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
WARNINGFLAGS_C = @WARNINGFLAGS_C@
WARNINGFLAGS_CPP = @WARNINGFLAGS_CPP@
XGETTEXT = @XGETTEXT@
XSLTPROC = @XSLTPROC@
ZIF_CFLAGS = @ZIF_CFLAGS@
ZIF_LIBS = @ZIF_LIBS@
ZYPP_CFLAGS = @ZYPP_CFLAGS@
ZYPP_LIBS = @ZYPP_LIBS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
gsettingsschemadir = @gsettingsschemadir@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
intltool__v_merge_options_ = @intltool__v_merge_options_@
intltool__v_merge_options_0 = @intltool__v_merge_options_0@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
pkgpyexecdir = @pkgpyexecdir@
pkgpythondir = @pkgpythondir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
sbindir = @sbindir@
security_framework = @security_framework@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
SUBDIRS = dbus
NULL = 

# We require automake 1.6 at least.
AUTOMAKE_OPTIONS = 1.6

# The name of the module, e.g. 'glib'.
DOC_MODULE = PackageKit

# The top-level SGML file.
DOC_MAIN_SGML_FILE = $(DOC_MODULE)-docs.sgml

# The directory containing the source code. Relative to $(srcdir).
# gtk-doc will search all .c & .h files beneath here for inline comments
# documenting the functions and macros.
DOC_SOURCE_DIR = ../../lib/packagekit-glib2

# Extra options to pass to gtkdoc-scangobj. Not normally needed.
SCANGOBJ_OPTIONS = 

# Extra options to supply to gtkdoc-scan.
SCAN_OPTIONS = 

# Extra options to supply to gtkdoc-mkdb.
MKDB_OPTIONS = --sgml-mode --output-format=xml

# Extra options to supply to gtkdoc-mktmpl
MKTMPL_OPTIONS = 

# Extra options to supply to gtkdoc-fixref. Not normally needed.
FIXXREF_OPTIONS = 

# Used for dependencies. The docs will be rebuilt if any of these change.
HFILE_GLOB = $(top_srcdir)/lib/packagekit-glib2/pk-*.h
CFILE_GLOB = $(top_srcdir)/lib/packagekit-glib2/pk-*.c

# Header files to ignore when scanning.
IGNORE_HFILES = \
	config.h					\
	pk-marshal.h					\
	$(NULL)


# Images to copy into HTML directory.
HTML_IMAGES = \
	spec/pk-structure.png				\
	spec/pk-structure.svg				\
	spec/pk-faq-error-code.png			\
	spec/pk-faq-status.png				\
	spec/pk-faq-filter.png				\
	spec/pk-transactions.svg			\
	spec/pk-transactions-set-locale.png		\
	spec/pk-transactions-failure.png		\
	spec/pk-transactions-download.png		\
	spec/pk-transactions-sig-install.png		\
	spec/pk-transactions-success.png		\
	spec/pk-transactions-auto-untrusted.png		\
	spec/pk-transactions-trusted.png


# Extra SGML files that are included by $(DOC_MAIN_SGML_FILE).
content_files = \
	version.xml					\
	dbus/org.freedesktop.PackageKit.ref.xml		\
	dbus/org.freedesktop.PackageKit.Transaction.ref.xml


# SGML files where gtk-doc abbrevations (#GtkWidget) are expanded
# These files must be listed here *and* in content_files
expand_content_files = 

# CFLAGS and LDFLAGS for compiling gtkdoc-scangobj with your library.
# Only needed if you are using gtkdoc-scangobj to dynamically query widget
# signals and properties.
INCLUDES = \
	$(POLKIT_CFLAGS)				\
	$(DBUS_CFLAGS)					\
	$(GLIB_CFLAGS)					\
	-I$(top_builddir)/lib/packagekit-glib2		\
	-I$(top_srcdir)/lib/packagekit-glib2		\
	$(NULL)

PK_GLIB2_LIBS = \
	$(top_builddir)/lib/packagekit-glib2/libpackagekit-glib2.la	\
	$(top_builddir)/lib/packagekit-glib2/libpackagekitprivate.a	\
	$(NULL)

GTKDOC_LIBS = \
	$(GLIB_LIBS)					\
	$(DBUS_LIBS)					\
	$(SQLITE_LIBS)					\
	$(PK_GLIB2_LIBS)					\
	$(POLKIT_LIBS)					\
	$(NULL)

@GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_CC = $(CC) $(INCLUDES) $(GTKDOC_DEPS_CFLAGS) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
@GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_CC = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(INCLUDES) $(GTKDOC_DEPS_CFLAGS) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
@GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_LD = $(CC) $(GTKDOC_DEPS_LIBS) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS)
@GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_LD = $(LIBTOOL) --tag=CC --mode=link $(CC) $(GTKDOC_DEPS_LIBS) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS)
@GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_RUN = 
@GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_RUN = $(LIBTOOL) --mode=execute

# We set GPATH here; this gives us semantics for GNU make
# which are more like other make's VPATH, when it comes to
# whether a source that is a target of one rule is then
# searched for in VPATH/GPATH.
#
GPATH = $(srcdir)
TARGET_DIR = $(HTML_DIR)/$(DOC_MODULE)
SETUP_FILES = \
	$(content_files)		\
	$(DOC_MAIN_SGML_FILE)		\
	$(DOC_MODULE)-sections.txt	\
	$(DOC_MODULE)-overrides.txt


# This includes the standard gtk-doc make rules, copied by gtkdocize.

# Other files to distribute
EXTRA_DIST = $(HTML_IMAGES) $(SETUP_FILES) version.xml.in
DOC_STAMPS = setup-build.stamp scan-build.stamp sgml-build.stamp \
	html-build.stamp pdf-build.stamp \
	sgml.stamp html.stamp pdf.stamp

SCANOBJ_FILES = \
	$(DOC_MODULE).args 	 \
	$(DOC_MODULE).hierarchy  \
	$(DOC_MODULE).interfaces \
	$(DOC_MODULE).prerequisites \
	$(DOC_MODULE).signals

REPORT_FILES = \
	$(DOC_MODULE)-undocumented.txt \
	$(DOC_MODULE)-undeclared.txt \
	$(DOC_MODULE)-unused.txt

CLEANFILES = \
	*.txt						\
	*.types						\
	*.args						\
	*.hierarchy					\
	*.interfaces					\
	*.prerequisites					\
	*.signals					\
	*.stamp						\
	tmpl

@ENABLE_GTK_DOC_TRUE@@GTK_DOC_BUILD_HTML_FALSE@HTML_BUILD_STAMP = 
@ENABLE_GTK_DOC_TRUE@@GTK_DOC_BUILD_HTML_TRUE@HTML_BUILD_STAMP = html-build.stamp
@ENABLE_GTK_DOC_TRUE@@GTK_DOC_BUILD_PDF_FALSE@PDF_BUILD_STAMP = 
@ENABLE_GTK_DOC_TRUE@@GTK_DOC_BUILD_PDF_TRUE@PDF_BUILD_STAMP = pdf-build.stamp
DISTCLEANFILES = \
	org.freedesktop.PackageKit.ref.xml		\
	org.freedesktop.PackageKit.Transaction.ref.xml

all: all-recursive

.SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/gtk-doc.make $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/api/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu docs/api/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;
$(top_srcdir)/gtk-doc.make:

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
version.xml: $(top_builddir)/config.status $(srcdir)/version.xml.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(MKDIR_P) "$(distdir)/$$subdir" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
check-am: all-am
check: check-recursive
all-am: Makefile all-local
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libtool clean-local mostlyclean-am

distclean: distclean-recursive
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-local \
	distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am: install-data-local

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am:

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic \
	maintainer-clean-local

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-local

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
	install-am install-strip tags-recursive

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
	all all-am all-local check check-am clean clean-generic \
	clean-libtool clean-local ctags ctags-recursive dist-hook \
	distclean distclean-generic distclean-libtool distclean-local \
	distclean-tags distdir dvi dvi-am html html-am info info-am \
	install install-am install-data install-data-am \
	install-data-local install-dvi install-dvi-am install-exec \
	install-exec-am install-html install-html-am install-info \
	install-info-am install-man install-pdf install-pdf-am \
	install-ps install-ps-am install-strip installcheck \
	installcheck-am installdirs installdirs-am maintainer-clean \
	maintainer-clean-generic maintainer-clean-local mostlyclean \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	tags tags-recursive uninstall uninstall-am uninstall-local


@ENABLE_GTK_DOC_TRUE@all-local: $(HTML_BUILD_STAMP) $(PDF_BUILD_STAMP)
@ENABLE_GTK_DOC_FALSE@all-local:

docs: $(HTML_BUILD_STAMP) $(PDF_BUILD_STAMP)

$(REPORT_FILES): sgml-build.stamp

#### setup ####

setup-build.stamp:
	-@if test "$(abs_srcdir)" != "$(abs_builddir)" ; then \
	    echo '  DOC   Preparing build'; \
	    files=`echo $(SETUP_FILES) $(expand_content_files) $(DOC_MODULE).types`; \
	    if test "x$$files" != "x" ; then \
	        for file in $$files ; do \
	            test -f $(abs_srcdir)/$$file && \
	                cp -pu $(abs_srcdir)/$$file $(abs_builddir)/ || true; \
	        done; \
	    fi; \
	fi
	@touch setup-build.stamp

#### scan ####

scan-build.stamp: $(HFILE_GLOB) $(CFILE_GLOB)
	@echo '  DOC   Scanning header files'
	@_source_dir='' ; \
	for i in $(DOC_SOURCE_DIR) ; do \
	    _source_dir="$${_source_dir} --source-dir=$$i" ; \
	done ; \
	gtkdoc-scan --module=$(DOC_MODULE) --ignore-headers="$(IGNORE_HFILES)" $${_source_dir} $(SCAN_OPTIONS) $(EXTRA_HFILES)
	@if grep -l '^..*$$' $(DOC_MODULE).types > /dev/null 2>&1 ; then \
	    echo "  DOC   Introspecting gobjects"; \
	    scanobj_options=""; \
	    gtkdoc-scangobj 2>&1 --help | grep  >/dev/null "\-\-verbose"; \
	    if test "$(?)" = "0"; then \
	        if test "x$(V)" = "x1"; then \
	            scanobj_options="--verbose"; \
	        fi; \
	    fi; \
	    CC="$(GTKDOC_CC)" LD="$(GTKDOC_LD)" RUN="$(GTKDOC_RUN)" CFLAGS="$(GTKDOC_CFLAGS) $(CFLAGS)" LDFLAGS="$(GTKDOC_LIBS) $(LDFLAGS)" \
	    gtkdoc-scangobj $(SCANGOBJ_OPTIONS) $$scanobj_options --module=$(DOC_MODULE); \
	else \
	    for i in $(SCANOBJ_FILES) ; do \
	        test -f $$i || touch $$i ; \
	    done \
	fi
	@touch scan-build.stamp

$(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt: scan-build.stamp
	@true

#### xml ####

sgml-build.stamp: setup-build.stamp $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt $(expand_content_files)
	@echo '  DOC   Building XML'
	@_source_dir='' ; \
	for i in $(DOC_SOURCE_DIR) ; do \
	    _source_dir="$${_source_dir} --source-dir=$$i" ; \
	done ; \
	gtkdoc-mkdb --module=$(DOC_MODULE) --output-format=xml --expand-content-files="$(expand_content_files)" --main-sgml-file=$(DOC_MAIN_SGML_FILE) $${_source_dir} $(MKDB_OPTIONS)
	@touch sgml-build.stamp

sgml.stamp: sgml-build.stamp
	@true

#### html ####

html-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files)
	@echo '  DOC   Building HTML'
	@rm -rf html
	@mkdir html
	@mkhtml_options=""; \
	gtkdoc-mkhtml 2>&1 --help | grep  >/dev/null "\-\-verbose"; \
	if test "$(?)" = "0"; then \
	  if test "x$(V)" = "x1"; then \
	    mkhtml_options="$$mkhtml_options --verbose"; \
	  fi; \
	fi; \
	gtkdoc-mkhtml 2>&1 --help | grep  >/dev/null "\-\-path"; \
	if test "$(?)" = "0"; then \
	  mkhtml_options="$$mkhtml_options --path=\"$(abs_srcdir)\""; \
	fi; \
	cd html && gtkdoc-mkhtml $$mkhtml_options $(MKHTML_OPTIONS) $(DOC_MODULE) ../$(DOC_MAIN_SGML_FILE)
	-@test "x$(HTML_IMAGES)" = "x" || \
	for file in $(HTML_IMAGES) ; do \
	  if test -f $(abs_srcdir)/$$file ; then \
	    cp $(abs_srcdir)/$$file $(abs_builddir)/html; \
	  fi; \
	  if test -f $(abs_builddir)/$$file ; then \
	    cp $(abs_builddir)/$$file $(abs_builddir)/html; \
	  fi; \
	done;
	@echo '  DOC   Fixing cross-references'
	@gtkdoc-fixxref --module=$(DOC_MODULE) --module-dir=html --html-dir=$(HTML_DIR) $(FIXXREF_OPTIONS)
	@touch html-build.stamp

#### pdf ####

pdf-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files)
	@echo '  DOC   Building PDF'
	@rm -f $(DOC_MODULE).pdf
	@mkpdf_options=""; \
	gtkdoc-mkpdf 2>&1 --help | grep  >/dev/null "\-\-verbose"; \
	if test "$(?)" = "0"; then \
	  if test "x$(V)" = "x1"; then \
	    mkpdf_options="$$mkpdf_options --verbose"; \
	  fi; \
	fi; \
	if test "x$(HTML_IMAGES)" != "x"; then \
	  for img in $(HTML_IMAGES); do \
	    part=`dirname $$img`; \
	    echo $$mkpdf_options | grep >/dev/null "\-\-imgdir=$$part "; \
	    if test $$? != 0; then \
	      mkpdf_options="$$mkpdf_options --imgdir=$$part"; \
	    fi; \
	  done; \
	fi; \
	gtkdoc-mkpdf --path="$(abs_srcdir)" $$mkpdf_options $(DOC_MODULE) $(DOC_MAIN_SGML_FILE) $(MKPDF_OPTIONS)
	@touch pdf-build.stamp

##############

clean-local:
	@rm -f *~ *.bak
	@rm -rf .libs

distclean-local:
	@rm -rf xml html $(REPORT_FILES) $(DOC_MODULE).pdf \
	    $(DOC_MODULE)-decl-list.txt $(DOC_MODULE)-decl.txt
	@if test "$(abs_srcdir)" != "$(abs_builddir)" ; then \
	    rm -f $(SETUP_FILES) $(expand_content_files) $(DOC_MODULE).types; \
	fi

maintainer-clean-local: clean
	@rm -rf xml html

install-data-local:
	@installfiles=`echo $(builddir)/html/*`; \
	if test "$$installfiles" = '$(builddir)/html/*'; \
	then echo 1>&2 'Nothing to install' ; \
	else \
	  if test -n "$(DOC_MODULE_VERSION)"; then \
	    installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \
	  else \
	    installdir="$(DESTDIR)$(TARGET_DIR)"; \
	  fi; \
	  $(mkinstalldirs) $${installdir} ; \
	  for i in $$installfiles; do \
	    echo ' $(INSTALL_DATA) '$$i ; \
	    $(INSTALL_DATA) $$i $${installdir}; \
	  done; \
	  if test -n "$(DOC_MODULE_VERSION)"; then \
	    mv -f $${installdir}/$(DOC_MODULE).devhelp2 \
	      $${installdir}/$(DOC_MODULE)-$(DOC_MODULE_VERSION).devhelp2; \
	  fi; \
	  $(GTKDOC_REBASE) --relative --dest-dir=$(DESTDIR) --html-dir=$${installdir}; \
	fi

uninstall-local:
	@if test -n "$(DOC_MODULE_VERSION)"; then \
	  installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \
	else \
	  installdir="$(DESTDIR)$(TARGET_DIR)"; \
	fi; \
	rm -rf $${installdir}

#
# Require gtk-doc when making dist
#
@ENABLE_GTK_DOC_TRUE@dist-check-gtkdoc:
@ENABLE_GTK_DOC_FALSE@dist-check-gtkdoc:
@ENABLE_GTK_DOC_FALSE@	@echo "*** gtk-doc must be installed and enabled in order to make dist"
@ENABLE_GTK_DOC_FALSE@	@false

dist-hook: dist-check-gtkdoc dist-hook-local
	@mkdir $(distdir)/html
	@cp ./html/* $(distdir)/html
	@-cp ./$(DOC_MODULE).pdf $(distdir)/
	@-cp ./$(DOC_MODULE).types $(distdir)/
	@-cp ./$(DOC_MODULE)-sections.txt $(distdir)/
	@cd $(distdir) && rm -f $(DISTCLEANFILES)
	@$(GTKDOC_REBASE) --online --relative --html-dir=$(distdir)/html

.PHONY : dist-hook-local docs

-include $(top_srcdir)/git.mk

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
