root@kingdoms-prod-db7:~/percona# Linux/lsiutil.x86_64 -i -s LSI Logic MPT Configuration Utility, Version 1.62, January 14, 2009 /bin/mknod: `/dev/mptctl': File exists 1 MPT Port found ============================================================================== /proc/mpt/ioc0 LSI Logic SAS1064E B3 MPT 105 Firmware 011e0000 IOC 0 Seg/Bus/Dev/Fun Board Name Board Assembly Board Tracer 0 11 0 0 SAS1064 Current Port State ------------------ SAS1064E's links are 3.0 G, 3.0 G, down, down Software Version Information ---------------------------- Current active firmware version is 011e0000 (1.30.00) Firmware image's version is MPTFW-01.30.00.00-IE LSI Logic x86 BIOS image's version is MPTBIOS-6.30.00.00 (2009.11.12) EFI BIOS image's version is 3.12.00.03 Firmware Settings ----------------- SAS WWID: 5005076b08a75ad8 Multi-pathing: Disabled SATA Native Command Queuing: Enabled SATA Write Caching: Enabled SATA Maximum Queue Depth: 32 Device Missing Report Delay: 144 seconds Device Missing I/O Delay: 8 seconds Phy Parameters for Phynum: 0 1 2 3 Link Enabled: Yes Yes Yes Yes Link Min Rate: 1.5 1.5 1.5 1.5 Link Max Rate: 3.0 3.0 3.0 3.0 SSP Initiator Enabled: Yes Yes Yes Yes SSP Target Enabled: No No No No Port Configuration: Auto Auto Auto Auto Target IDs per enclosure: 1 Persistent mapping: Enabled Physical mapping type: None Target ID 0 reserved for boot: Yes Starting slot (direct attach): 0 Target IDs (physical mapping): 4 Interrupt Coalescing: Enabled, timeout is 16 us, depth is 4 Persistent Mappings ------------------- Persistent entry 0 is valid, Bus 0 Target 1 is PhysId 500000e113c17152 Persistent entry 1 is valid, Bus 0 Target 2 is PhysId 5000c5001d784329 B___T___L Type Vendor Product Rev SASAddress PhyNum 0 1 0 Disk LSILOGIC Logical Volume 3000 Hidden RAID Devices: B___T Device Vendor Product Rev SASAddress PhyNum 0 2 PhysDisk 0 IBM-ESXS ST9300603SS F B536 5000c5001d784329 1 0 3 PhysDisk 1 IBM-ESXS MBD2300RC SB17 500000e113c17152 0