# Makefile.in generated by automake 1.10.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = python/engine/PinYin
DIST_COMMON = $(am__pinyin_PYTHON_DIST) $(srcdir)/Makefile.am \
	$(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/as-version.m4 \
	$(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/iconv.m4 \
	$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
	$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/nls.m4 \
	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
am__pinyin_PYTHON_DIST = PinYin.py PYUtil.py PYParser.py PYSQLiteDB.py \
	PYCreatePinYinDB.py SpecialTable.py SpecialPhrase.py \
	ZhengJu.py ShuangPin.py JianPin.py QuanPin.py PYDict.py \
	ZhengJuDB.py __init__.py
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
am__installdirs = "$(DESTDIR)$(pinyindir)" "$(DESTDIR)$(pydbdir)" \
	"$(DESTDIR)$(pyspecialdir)"
pinyinPYTHON_INSTALL = $(INSTALL_DATA)
py_compile = $(top_srcdir)/py-compile
pydbDATA_INSTALL = $(INSTALL_DATA)
pyspecialDATA_INSTALL = $(INSTALL_DATA)
DATA = $(pydb_DATA) $(pyspecial_DATA)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO = @ECHO@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
F77 = @F77@
FFLAGS = @FFLAGS@
GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
GLIB_CFLAGS = @GLIB_CFLAGS@
GLIB_GENMARSHAL = @GLIB_GENMARSHAL@
GLIB_LIBS = @GLIB_LIBS@
GLIB_MKENUMS = @GLIB_MKENUMS@
GMSGFMT = @GMSGFMT@
GMSGFMT_015 = @GMSGFMT_015@
GOBJECT_QUERY = @GOBJECT_QUERY@
GREP = @GREP@
GTK2_CFLAGS = @GTK2_CFLAGS@
GTK2_LIBS = @GTK2_LIBS@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTLLIBS = @INTLLIBS@
INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
LDFLAGS = @LDFLAGS@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
MSGFMT = @MSGFMT@
MSGFMT_015 = @MSGFMT_015@
MSGMERGE = @MSGMERGE@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PACKAGE_VERSION_MAJOR = @PACKAGE_VERSION_MAJOR@
PACKAGE_VERSION_MICRO = @PACKAGE_VERSION_MICRO@
PACKAGE_VERSION_MINOR = @PACKAGE_VERSION_MINOR@
PACKAGE_VERSION_NANO = @PACKAGE_VERSION_NANO@
PACKAGE_VERSION_RELEASE = @PACKAGE_VERSION_RELEASE@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
POSUB = @POSUB@
PYGTK2_CFLAGS = @PYGTK2_CFLAGS@
PYGTK2_LIBS = @PYGTK2_LIBS@
PYTHON = @PYTHON@
PYTHON_CFLAGS = @PYTHON_CFLAGS@
PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
PYTHON_LIBS = @PYTHON_LIBS@
PYTHON_PLATFORM = @PYTHON_PLATFORM@
PYTHON_PREFIX = @PYTHON_PREFIX@
PYTHON_VERSION = @PYTHON_VERSION@
RANLIB = @RANLIB@
SCIM_BIN_VER = @SCIM_BIN_VER@
SCIM_CFLAGS = @SCIM_CFLAGS@
SCIM_DATADIR = @SCIM_DATADIR@
SCIM_ICONDIR = @SCIM_ICONDIR@
SCIM_LIBS = @SCIM_LIBS@
SCIM_MODULEDIR = @SCIM_MODULEDIR@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
XGETTEXT = @XGETTEXT@
XGETTEXT_015 = @XGETTEXT_015@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_F77 = @ac_ct_F77@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
pkgpyexecdir = @pkgpyexecdir@
pkgpythondir = @pkgpythondir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@

# vim:set noet ts=4:
#
# scim-python
#
# Copyright (c) 2007-2008 Huang Peng <shawn.p.huang@gmail.com>
#
#
# This library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
# License as published by the Free Software Foundation; either
# version 2 of the License, or (at your option) any later version.
#
# This library is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU Lesser General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public
# License along with this program; if not, write to the
# Free Software Foundation, Inc., 59 Temple Place, Suite 330,
# Boston, MA  02111-1307  USA
#
# $Id: $
#
@ENABLE_PINYIN_TRUE@pinyin_PYTHON = \
@ENABLE_PINYIN_TRUE@	PinYin.py	\
@ENABLE_PINYIN_TRUE@	PYUtil.py	\
@ENABLE_PINYIN_TRUE@	PYParser.py	\
@ENABLE_PINYIN_TRUE@	PYSQLiteDB.py	\
@ENABLE_PINYIN_TRUE@	PYCreatePinYinDB.py	\
@ENABLE_PINYIN_TRUE@	SpecialTable.py	\
@ENABLE_PINYIN_TRUE@	SpecialPhrase.py	\
@ENABLE_PINYIN_TRUE@	ZhengJu.py 	\
@ENABLE_PINYIN_TRUE@	ShuangPin.py 	\
@ENABLE_PINYIN_TRUE@	JianPin.py 	\
@ENABLE_PINYIN_TRUE@	QuanPin.py 	\
@ENABLE_PINYIN_TRUE@	PYDict.py\
@ENABLE_PINYIN_TRUE@	ZhengJuDB.py	\
@ENABLE_PINYIN_TRUE@	__init__.py	\
@ENABLE_PINYIN_TRUE@	$(NULL)

@ENABLE_PINYIN_TRUE@pinyindir = $(pkgdatadir)/engine/PinYin

# PYDATA_FILES =	\
# 	utf8py.org	\
# 	utf8pyPhrase.org	\
# 	CharFreq-Modern_utf8.txt	\
# 	SogouLabDic-utf8.dic	\
# 	$(NULL)
@ENABLE_PINYIN_TRUE@PYDATA_FILES = \
@ENABLE_PINYIN_TRUE@	$(NULL)

@ENABLE_PINYIN_TRUE@pydb_DATA = py.db
@ENABLE_PINYIN_TRUE@pydbdir = $(pkgdatadir)/engine/PinYin
@ENABLE_PINYIN_TRUE@DBVER = 0.1.10.5
@ENABLE_PINYIN_TRUE@DBTAR = pinyin-database-${DBVER}.tar.bz2
@ENABLE_PINYIN_TRUE@pyspecial_DATA = special_phrase special_table
@ENABLE_PINYIN_TRUE@pyspecialdir = $(pkgdatadir)/engine/PinYin
@ENABLE_DEBIAN_DPKG_FALSE@@ENABLE_PINYIN_TRUE@EXTRA_DIST = \
@ENABLE_DEBIAN_DPKG_FALSE@@ENABLE_PINYIN_TRUE@	$(PYDATA_FILES) \
@ENABLE_DEBIAN_DPKG_FALSE@@ENABLE_PINYIN_TRUE@	special_table	\
@ENABLE_DEBIAN_DPKG_FALSE@@ENABLE_PINYIN_TRUE@	special_phrase	\
@ENABLE_DEBIAN_DPKG_FALSE@@ENABLE_PINYIN_TRUE@	$(NULL)

@ENABLE_DEBIAN_DPKG_TRUE@@ENABLE_PINYIN_TRUE@EXTRA_DIST = \
@ENABLE_DEBIAN_DPKG_TRUE@@ENABLE_PINYIN_TRUE@	$(PYDATA_FILES) \
@ENABLE_DEBIAN_DPKG_TRUE@@ENABLE_PINYIN_TRUE@	special_table	\
@ENABLE_DEBIAN_DPKG_TRUE@@ENABLE_PINYIN_TRUE@	special_phrase	\
@ENABLE_DEBIAN_DPKG_TRUE@@ENABLE_PINYIN_TRUE@	${DBTAR} \
@ENABLE_DEBIAN_DPKG_TRUE@@ENABLE_PINYIN_TRUE@	$(NULL)

@ENABLE_DEBIAN_DPKG_FALSE@@ENABLE_PINYIN_TRUE@DISTCLEANFILES = \
@ENABLE_DEBIAN_DPKG_FALSE@@ENABLE_PINYIN_TRUE@	py.db	\
@ENABLE_DEBIAN_DPKG_FALSE@@ENABLE_PINYIN_TRUE@	*.pyc	\
@ENABLE_DEBIAN_DPKG_FALSE@@ENABLE_PINYIN_TRUE@	${DBTAR} \
@ENABLE_DEBIAN_DPKG_FALSE@@ENABLE_PINYIN_TRUE@	$(NULL)

@ENABLE_DEBIAN_DPKG_TRUE@@ENABLE_PINYIN_TRUE@DISTCLEANFILES = \
@ENABLE_DEBIAN_DPKG_TRUE@@ENABLE_PINYIN_TRUE@	py.db	\
@ENABLE_DEBIAN_DPKG_TRUE@@ENABLE_PINYIN_TRUE@	*.pyc	\
@ENABLE_DEBIAN_DPKG_TRUE@@ENABLE_PINYIN_TRUE@	$(NULL)

all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  python/engine/PinYin/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  python/engine/PinYin/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
install-pinyinPYTHON: $(pinyin_PYTHON)
	@$(NORMAL_INSTALL)
	test -z "$(pinyindir)" || $(MKDIR_P) "$(DESTDIR)$(pinyindir)"
	@list='$(pinyin_PYTHON)'; dlist=''; for p in $$list; do\
	  if test -f "$$p"; then b=; else b="$(srcdir)/"; fi; \
	  if test -f $$b$$p; then \
	    f=$(am__strip_dir) \
	    dlist="$$dlist $$f"; \
	    echo " $(pinyinPYTHON_INSTALL) '$$b$$p' '$(DESTDIR)$(pinyindir)/$$f'"; \
	    $(pinyinPYTHON_INSTALL) "$$b$$p" "$(DESTDIR)$(pinyindir)/$$f"; \
	  else :; fi; \
	done; \
	if test -n "$$dlist"; then \
	  if test -z "$(DESTDIR)"; then \
	    PYTHON=$(PYTHON) $(py_compile) --basedir "$(pinyindir)" $$dlist; \
	  else \
	    PYTHON=$(PYTHON) $(py_compile) --destdir "$(DESTDIR)" --basedir "$(pinyindir)" $$dlist; \
	  fi; \
	else :; fi

uninstall-pinyinPYTHON:
	@$(NORMAL_UNINSTALL)
	@list='$(pinyin_PYTHON)'; dlist=''; for p in $$list; do\
	  f=$(am__strip_dir) \
	  rm -f "$(DESTDIR)$(pinyindir)/$$f"; \
	  rm -f "$(DESTDIR)$(pinyindir)/$${f}c"; \
	  rm -f "$(DESTDIR)$(pinyindir)/$${f}o"; \
	done
install-pydbDATA: $(pydb_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(pydbdir)" || $(MKDIR_P) "$(DESTDIR)$(pydbdir)"
	@list='$(pydb_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(pydbDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pydbdir)/$$f'"; \
	  $(pydbDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pydbdir)/$$f"; \
	done

uninstall-pydbDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(pydb_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(pydbdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(pydbdir)/$$f"; \
	done
install-pyspecialDATA: $(pyspecial_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(pyspecialdir)" || $(MKDIR_P) "$(DESTDIR)$(pyspecialdir)"
	@list='$(pyspecial_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(pyspecialDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pyspecialdir)/$$f'"; \
	  $(pyspecialDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pyspecialdir)/$$f"; \
	done

uninstall-pyspecialDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(pyspecial_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(pyspecialdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(pyspecialdir)/$$f"; \
	done
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-am
all-am: Makefile $(DATA)
installdirs:
	for dir in "$(DESTDIR)$(pinyindir)" "$(DESTDIR)$(pydbdir)" "$(DESTDIR)$(pyspecialdir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
@ENABLE_PINYIN_FALSE@install-data-hook:
clean: clean-am

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

html: html-am

info: info-am

info-am:

install-data-am: install-pinyinPYTHON install-pydbDATA \
	install-pyspecialDATA
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-data-hook

install-dvi: install-dvi-am

install-exec-am:

install-html: install-html-am

install-info: install-info-am

install-man:

install-pdf: install-pdf-am

install-ps: install-ps-am

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-pinyinPYTHON uninstall-pydbDATA \
	uninstall-pyspecialDATA
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) uninstall-hook

.MAKE: install-am install-data-am install-strip uninstall-am

.PHONY: all all-am check check-am clean clean-generic clean-libtool \
	distclean distclean-generic distclean-libtool distdir dvi \
	dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-data-hook install-dvi \
	install-dvi-am install-exec install-exec-am install-html \
	install-html-am install-info install-info-am install-man \
	install-pdf install-pdf-am install-pinyinPYTHON install-ps \
	install-ps-am install-pydbDATA install-pyspecialDATA \
	install-strip installcheck installcheck-am installdirs \
	maintainer-clean maintainer-clean-generic mostlyclean \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	uninstall uninstall-am uninstall-hook uninstall-pinyinPYTHON \
	uninstall-pydbDATA uninstall-pyspecialDATA


@ENABLE_PINYIN_TRUE@${DBTAR}:
@ENABLE_PINYIN_TRUE@	wget http://scim-python.googlecode.com/files/${DBTAR}

@ENABLE_PINYIN_TRUE@py.db: ${DBTAR}
@ENABLE_PINYIN_TRUE@	tar jxvfm ${DBTAR}
@ENABLE_PINYIN_TRUE@install-data-hook:
@ENABLE_PINYIN_TRUE@	@(if test "${NO_INDEX}" = ""; then \
@ENABLE_PINYIN_TRUE@		cd $(DESTDIR)$(pinyindir); \
@ENABLE_PINYIN_TRUE@		echo "Creating INDEX"; \
@ENABLE_PINYIN_TRUE@		$(PYTHON) -c "import PYSQLiteDB; db = PYSQLiteDB.PYSQLiteDB (filename='py.db'); db.create_indexes ();" ;\
@ENABLE_PINYIN_TRUE@	fi)
uninstall-hook:
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
