RIPv2-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, TimeTicks, IpAddress FROM SNMPv2-SMI TEXTUAL-CONVENTION, RowStatus FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF mib-2 FROM RFC1213-MIB; -- This MIB module uses the extended OBJECT-TYPE macro as -- defined in [9]. rip2 MODULE-IDENTITY LAST-UPDATED "9407272253Z" -- Wed Jul 27 22:53:04 PDT 1994 ORGANIZATION "IETF RIP-II Working Group" CONTACT-INFO " Fred Baker Postal: Cisco Systems 519 Lado Drive Santa Barbara, California 93111 Tel: +1 805 681 0115 E-Mail: fbaker@cisco.com Postal: Gary Malkin Xylogics, Inc. 53 Third Avenue Burlington, MA 01803 Phone: (617) 272-8140 EMail: gmalkin@Xylogics.COM" DESCRIPTION "The MIB module to describe the RIP2 Version 2 Protocol" ::= { mib-2 23 } -- RIP-2 Management Information Base -- the RouteTag type represents the contents of the -- Route Domain field in the packet header or route entry. -- The use of the Route Domain is deprecated. RouteTag ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "the RouteTag type represents the contents of the Route Domain field in the packet header or route entry" SYNTAX OCTET STRING (SIZE (2)) --4.1 Global Counters -- The RIP-2 Globals Group. -- Implementation of this group is mandatory for systems -- which implement RIP-2. -- These counters are intended to facilitate debugging quickly -- changing routes or failing neighbors rip2Globals OBJECT IDENTIFIER ::= { rip2 1 } rip2GlobalRouteChanges OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of route changes made to the IP Route Database by RIP. This does not include the refresh of a route's age." ::= { rip2Globals 1 } rip2GlobalQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of responses sent to RIP queries from other systems." ::= { rip2Globals 2 } --4.2 RIP Interface Tables -- RIP Interfaces Groups -- Implementation of these Groups is mandatory for systems -- which implement RIP-2. -- The RIP Interface Status Table. rip2IfStatTable OBJECT-TYPE SYNTAX SEQUENCE OF Rip2IfStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of subnets which require separate status monitoring in RIP." ::= { rip2 2 } rip2IfStatEntry OBJECT-TYPE SYNTAX Rip2IfStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Single Routing Domain in a single Subnet." INDEX { rip2IfStatAddress } ::= { rip2IfStatTable 1 } Rip2IfStatEntry ::= SEQUENCE { rip2IfStatAddress IpAddress, rip2IfStatRcvBadPackets Counter32, rip2IfStatRcvBadRoutes Counter32, rip2IfStatSentUpdates Counter32, rip2IfStatStatus RowStatus } rip2IfStatAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for the IP Interface in network byte order." ::= { rip2IfStatEntry 1 } rip2IfStatRcvBadPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RIP response packets received by the RIP process which were subsequently discarded for any reason (e.g. a version 0 packet, or an unknown command type)." ::= { rip2IfStatEntry 2 } rip2IfStatRcvBadRoutes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of routes, in valid RIP packets, which were ignored for any reason (e.g. unknown address family, or invalid metric)." ::= { rip2IfStatEntry 3 } rip2IfStatSentUpdates OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of triggered RIP updates actually sent on this interface. This explicitly does NOT include full updates sent containing new information." ::= { rip2IfStatEntry 4 } rip2IfStatStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Writing invalid has the effect of deleting this interface." ::= { rip2IfStatEntry 5 } -- The RIP Interface Configuration Table. rip2IfConfTable OBJECT-TYPE SYNTAX SEQUENCE OF Rip2IfConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of subnets which require separate configuration in RIP." ::= { rip2 3 } rip2IfConfEntry OBJECT-TYPE SYNTAX Rip2IfConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Single Routing Domain in a single Subnet." INDEX { rip2IfConfAddress } ::= { rip2IfConfTable 1 } Rip2IfConfEntry ::= SEQUENCE { rip2IfConfAddress IpAddress, rip2IfConfDomain RouteTag, rip2IfConfAuthType INTEGER, rip2IfConfAuthKey OCTET STRING (SIZE(0..16)), rip2IfConfSend INTEGER, rip2IfConfReceive INTEGER, rip2IfConfDefaultMetric INTEGER, rip2IfConfStatus RowStatus, rip2IfConfSrcAddress IpAddress } rip2IfConfAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for the IP Interface in network byte order." ::= { rip2IfConfEntry 1 } rip2IfConfDomain OBJECT-TYPE SYNTAX RouteTag MAX-ACCESS read-create STATUS obsolete DESCRIPTION "Value inserted into the Routing Domain field of all RIP packets sent on this interface." DEFVAL { '0000'h } ::= { rip2IfConfEntry 2 } rip2IfConfAuthType OBJECT-TYPE SYNTAX INTEGER { noAuthentication (1), simplePassword (2), md5 (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The type of Authentication used on this interface." DEFVAL { noAuthentication } ::= { rip2IfConfEntry 3 } rip2IfConfAuthKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value to be used as the Authentication Key whenever the corresponding instance of rip2IfConfAuthType has a value other than noAuthentication. A modification of the corresponding instance of rip2IfConfAuthType does not modify the rip2IfConfAuthKey value. If a string shorter than 16 octets is supplied, it will be left- justified and padded to 16 octets, on the right, with nulls (0x00). Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object." DEFVAL { ''h } ::= { rip2IfConfEntry 4 } rip2IfConfSend OBJECT-TYPE SYNTAX INTEGER { doNotSend (1), ripVersion1 (2), rip1Compatible (3), ripVersion2 (4), ripV1Demand (5), ripV2Demand (6) } MAX-ACCESS read-create STATUS current DESCRIPTION "What the router sends on this interface. ripVersion1 implies sending RIP updates compliant with RFC 1058. rip1Compatible implies broadcasting RIP-2 updates using RFC 1058 route subsumption rules. ripVersion2 implies multicasting RIP-2 updates. ripV1Demand indicates the use of Demand RIP on a WAN interface under RIP Version 1 rules. ripV2Demand indicates the use of Demand RIP on a WAN interface under Version 2 rules." DEFVAL { rip1Compatible } ::= { rip2IfConfEntry 5 } rip2IfConfReceive OBJECT-TYPE SYNTAX INTEGER { rip1 (1), rip2 (2), rip1OrRip2 (3), doNotRecieve (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "This indicates which version of RIP updates are to be accepted. Note that rip2 and rip1OrRip2 implies reception of multicast packets." DEFVAL { rip1OrRip2 } ::= { rip2IfConfEntry 6 } rip2IfConfDefaultMetric OBJECT-TYPE SYNTAX INTEGER ( 0..15 ) MAX-ACCESS read-create STATUS current DESCRIPTION "This variable indicates the metric that is to be used for the default route entry in RIP updates originated on this interface. A value of zero indicates that no default route should be originated; in this case, a default route via another router may be propagated." ::= { rip2IfConfEntry 7 } rip2IfConfStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Writing invalid has the effect of deleting this interface." ::= { rip2IfConfEntry 8 } rip2IfConfSrcAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP Address this system will use as a source address on this interface. If it is a numbered interface, this MUST be the same value as rip2IfConfAddress. On unnumbered interfaces, it must be the value of rip2IfConfAddress for some interface on the system." ::= { rip2IfConfEntry 9 } --4.3 Peer Table -- Peer Table -- The RIP Peer Group -- Implementation of this Group is Optional -- This group provides information about active peer -- relationships intended to assist in debugging. An -- active peer is a router from which a valid RIP -- updated has been heard in the last 180 seconds. rip2PeerTable OBJECT-TYPE SYNTAX SEQUENCE OF Rip2PeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of RIP Peers." ::= { rip2 4 } rip2PeerEntry OBJECT-TYPE SYNTAX Rip2PeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information regarding a single routing peer." INDEX { rip2PeerAddress, rip2PeerDomain } ::= { rip2PeerTable 1 } Rip2PeerEntry ::= SEQUENCE { rip2PeerAddress IpAddress, rip2PeerDomain RouteTag, rip2PeerLastUpdate TimeTicks, rip2PeerVersion INTEGER, rip2PeerRcvBadPackets Counter32, rip2PeerRcvBadRoutes Counter32 } rip2PeerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address that the peer is using as its source address. Note that on an unnumbered link, this may not be a member of any subnet on the system." ::= { rip2PeerEntry 1 } rip2PeerDomain OBJECT-TYPE SYNTAX RouteTag MAX-ACCESS read-only STATUS current DESCRIPTION "The value in the Routing Domain field in RIP packets received from the peer. As domain suuport is deprecated, this must be zero." ::= { rip2PeerEntry 2 } rip2PeerLastUpdate OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the most recent RIP update was received from this system." ::= { rip2PeerEntry 3 } rip2PeerVersion OBJECT-TYPE SYNTAX INTEGER ( 0..255 ) MAX-ACCESS read-only STATUS current DESCRIPTION "The RIP version number in the header of the last RIP packet received." ::= { rip2PeerEntry 4 } rip2PeerRcvBadPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RIP response packets from this peer discarded as invalid." ::= { rip2PeerEntry 5 } rip2PeerRcvBadRoutes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of routes from this peer that were ignored because the entry format was invalid." ::= { rip2PeerEntry 6 } -- conformance information rip2Conformance OBJECT IDENTIFIER ::= { rip2 5 } rip2Groups OBJECT IDENTIFIER ::= { rip2Conformance 1 } rip2Compliances OBJECT IDENTIFIER ::= { rip2Conformance 2 } -- compliance statements rip2Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement " MODULE -- this module MANDATORY-GROUPS { rip2GlobalGroup, rip2IfStatGroup, rip2IfConfGroup, rip2PeerGroup } GROUP rip2GlobalGroup DESCRIPTION "This group defines global controls for RIP-II systems." GROUP rip2IfStatGroup DESCRIPTION "This group defines interface statistics for RIP-II systems." GROUP rip2IfConfGroup DESCRIPTION "This group defines interface configuration for RIP-II systems." GROUP rip2PeerGroup DESCRIPTION "This group defines peer information for RIP-II systems." ::= { rip2Compliances 1 } -- units of conformance rip2GlobalGroup OBJECT-GROUP OBJECTS { rip2GlobalRouteChanges, rip2GlobalQueries } STATUS current DESCRIPTION "This group defines global controls for RIP-II systems." ::= { rip2Groups 1 } rip2IfStatGroup OBJECT-GROUP OBJECTS { rip2IfStatAddress, rip2IfStatRcvBadPackets, rip2IfStatRcvBadRoutes, rip2IfStatSentUpdates, rip2IfStatStatus } STATUS current DESCRIPTION "This group defines interface statistics for RIP-II systems." ::= { rip2Groups 2 } rip2IfConfGroup OBJECT-GROUP OBJECTS { rip2IfConfAddress, rip2IfConfAuthType, rip2IfConfAuthKey, rip2IfConfSend, rip2IfConfReceive, rip2IfConfDefaultMetric, rip2IfConfStatus, rip2IfConfSrcAddress } STATUS current DESCRIPTION "This group defines interface configuration for RIP-II systems." ::= { rip2Groups 3 } rip2PeerGroup OBJECT-GROUP OBJECTS { rip2PeerAddress, rip2PeerDomain, rip2PeerLastUpdate, rip2PeerVersion, rip2PeerRcvBadPackets, rip2PeerRcvBadRoutes } STATUS current DESCRIPTION "This group defines peer information for RIP-II systems." ::= { rip2Groups 4 } END