# Makefile.in generated by automake 1.7.8 from Makefile.am.
# @configure_input@

# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

#
# No modifications of this Makefile should be necessary.
#
# To use this template:
#     1) Define: figdir, docname, lang, omffile, and entities in
#        your Makefile.am file for each document directory,
#        although figdir, omffile, and entities may be empty
#     2) Make sure the Makefile in (1) also includes 
#	 "include $(top_srcdir)/doc/xmldocs.make" and
#	 "dist-hook: app-dist-hook".
#     3) Optionally define 'entities' to hold xml entities which
#        you would also like installed
#     4) Figures must go under $(figdir)/ and be in PNG format
#     5) You should only have one document per directory 
#     6) Note that the figure directory, $(figdir)/, should not have its
#        own Makefile since this Makefile installs those figures.
#
# example Makefile.am:
#   figdir = figures
#   docname = scrollkeeper-manual
#   lang = C
#   omffile=scrollkeeper-manual-C.omf
#   entities = fdl.xml
#   include $(top_srcdir)/help/xmldocs.make
#   dist-hook: app-dist-hook
#
# About this file:
#	This file was taken from scrollkeeper_example2, a package illustrating
#	how to install documentation and OMF files for use with ScrollKeeper 
#	0.3.x and 0.4.x.  For more information, see:
#		http://scrollkeeper.sourceforge.net/
#	Version: 0.1.2 (last updated: March 20, 2002)
#

# THIS VERSION IS CUSTOMIZED FOR SCROLLKEEPER.  DO NOT USE IN OTHER PACKAGES
# THAN SCROLLKEEPER ITSELF.

# This file contains the build instructions for installing OMF files.  It is
# generally called from the makefiles for particular formats of documentation.
#
# Note: This make file is not incorporated into xmldocs.make because, in
#       general, there will be other documents install besides XML documents
#       and the makefiles for these formats should also include this file.

srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ../../..

am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
ACLOCAL = @ACLOCAL@
ALLOCA = @ALLOCA@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DATADIRNAME = @DATADIRNAME@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO = @ECHO@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
GENCAT = @GENCAT@
GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
GLIBC21 = @GLIBC21@
GMSGFMT = @GMSGFMT@
HOST_TYPE = @HOST_TYPE@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTOBJEXT = @INSTOBJEXT@
INTLBISON = @INTLBISON@
INTLLIBS = @INTLLIBS@
INTLOBJS = @INTLOBJS@
INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@
INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@
INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@
INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
INTLTOOL_KBD_RULE = @INTLTOOL_KBD_RULE@
INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@
INTLTOOL_MERGE = @INTLTOOL_MERGE@
INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@
INTLTOOL_PERL = @INTLTOOL_PERL@
INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@
INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@
INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@
INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@
INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@
INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@
INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@
INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@
INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@
INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@
INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
LDFLAGS = @LDFLAGS@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIBXML2_REQUIRED = @LIBXML2_REQUIRED@
LN_S = @LN_S@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
MSGMERGE = @MSGMERGE@
OBJEXT = @OBJEXT@
OMFDIRS = @OMFDIRS@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
POSUB = @POSUB@
RANLIB = @RANLIB@
SCROLLKEEPER_PARTIAL_DB_DIR = @SCROLLKEEPER_PARTIAL_DB_DIR@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
XGETTEXT = @XGETTEXT@
XML_CATALOG = @XML_CATALOG@
XML_CFLAGS = @XML_CFLAGS@
XML_CONFIG = @XML_CONFIG@
XML_LIBS = @XML_LIBS@
XSLT_CFLAGS = @XSLT_CFLAGS@
XSLT_CONFIG = @XSLT_CONFIG@
XSLT_LIBS = @XSLT_LIBS@
ac_ct_CC = @ac_ct_CC@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
datadir = @datadir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localstatedir = @localstatedir@
mandir = @mandir@
oldincludedir = @oldincludedir@
prefix = @prefix@
program_transform_name = @program_transform_name@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
figdir = 
docname = writing_scrollkeeper_omf_files
lang = C
omffile = writing_scrollkeeper_omf_files-C.omf
entities = legal.xml

# ************* Begin of section some packagers may need to modify  **************
# This variable (docdir) specifies where the documents should be installed.
# This default value should work for most packages.
docdir = $(datadir)/@PACKAGE@/doc/$(docname)/$(lang)

# **************  You should not have to edit below this line  *******************
xml_files = $(entities) $(docname).xml
omf_dir = $(top_srcdir)/omf-install

EXTRA_DIST = $(xml_files) $(omffile)

CLEANFILES = omf_timestamp *.out

omf_dest_dir = $(datadir)/omf/@PACKAGE@
subdir = doc/writing_scrollkeeper_omf_files/C
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
DIST_SOURCES =
DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/doc/omf.make \
	$(top_srcdir)/doc/xmldocs.make Makefile.am
all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in:  Makefile.am $(top_srcdir)/doc/xmldocs.make $(top_srcdir)/doc/omf.make $(top_srcdir)/configure.in $(ACLOCAL_M4)
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  doc/writing_scrollkeeper_omf_files/C/Makefile
Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool
uninstall-info-am:
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:

DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

top_distdir = ../../..
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)

distdir: $(DISTFILES)
	$(mkinstalldirs) $(distdir)/../../../doc
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkinstalldirs) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
check-am: all-am
check: check-am
all-am: Makefile

installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool

dvi: dvi-am

dvi-am:

info: info-am

info-am:

install-data-am: install-data-local
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-data-hook

install-exec-am:

install-info: install-info-am

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-info-am uninstall-local

.PHONY: all all-am check check-am clean clean-generic clean-libtool \
	distclean distclean-generic distclean-libtool distdir dvi \
	dvi-am info info-am install install-am install-data \
	install-data-am install-data-local install-exec install-exec-am \
	install-info install-info-am install-man install-strip \
	installcheck installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
	uninstall-info-am uninstall-local


omf: omf_timestamp

omf_timestamp: $(omffile)
	-for file in $(omffile); do \
	  $(top_builddir)/cl/src/scrollkeeper-preinstall $(docdir)/$(docname).xml $(srcdir)/$$file $$file.out; \
	done
	touch omf_timestamp

# Install the OMF files
install-data-hook-omf:
	$(mkinstalldirs) $(DESTDIR)$(omf_dest_dir)
	for file in $(omffile); do \
		$(INSTALL_DATA) $$file.out $(DESTDIR)$(omf_dest_dir)/$$file; \
	done

# Remove our OMF files and directory
uninstall-local-omf:
	-for file in $(srcdir)/*.omf; do \
		basefile=`basename $$file`; \
		rm -f $(omf_dest_dir)/$$basefile; \
	done
	-rmdir $(omf_dest_dir)

all: omf

$(docname).xml: $(entities)
	-ourdir=`pwd`;  \
	cd $(srcdir);   \
	cp $(entities) $$ourdir

app-dist-hook:
	if test "$(figdir)"; then \
	  $(mkinstalldirs) $(distdir)/$(figdir); \
	  for file in $(srcdir)/$(figdir)/*.png; do \
	    basefile=`echo $$file | sed -e  's,^.*/,,'`; \
	    $(INSTALL_DATA) $$file $(distdir)/$(figdir)/$$basefile; \
	  done \
	fi

install-data-local: omf
	$(mkinstalldirs) $(DESTDIR)$(docdir)
	for file in $(xml_files); do \
	  cp $(srcdir)/$$file $(DESTDIR)$(docdir); \
	done
	if test "$(figdir)"; then \
	  $(mkinstalldirs) $(DESTDIR)$(docdir)/$(figdir); \
	  for file in $(srcdir)/$(figdir)/*.png; do \
	    basefile=`echo $$file | sed -e  's,^.*/,,'`; \
	    $(INSTALL_DATA) $$file $(DESTDIR)$(docdir)/$(figdir)/$$basefile; \
	  done \
	fi

install-data-hook: install-data-hook-omf

uninstall-local: uninstall-local-doc uninstall-local-omf

uninstall-local-doc:
	-if test "$(figdir)"; then \
	  for file in $(srcdir)/$(figdir)/*.png; do \
	    basefile=`echo $$file | sed -e  's,^.*/,,'`; \
	    rm -f $(DESTDIR)/$(docdir)/$(figdir)/$$basefile; \
	  done; \
	  rmdir $(DESTDIR)$(docdir)/$(figdir); \
	fi
	-for file in $(xml_files); do \
	  rm -f $(DESTDIR)$(docdir)/$$file; \
	done
	-rmdir $(DESTDIR)$(docdir)
dist-hook: app-dist-hook
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
