# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@


VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
bin_PROGRAMS = $(am__EXEEXT_1) $(am__EXEEXT_2) $(am__EXEEXT_3)
noinst_PROGRAMS = $(am__EXEEXT_5) @BUILD_MISC@
EXTRA_PROGRAMS =
subdir = .
DIST_COMMON = NEWS README ChangeLog $(srcdir)/Makefile.in \
	$(srcdir)/Makefile.am $(top_srcdir)/configure \
	$(am__configure_deps) $(srcdir)/config.in \
	$(srcdir)/../mkinstalldirs arparse.h arparse.c arlex.c \
	arparse.h arparse.c arlex.c $(srcdir)/../depcomp \
	$(srcdir)/../ylwrap
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../bfd/acinclude.m4 \
	$(top_srcdir)/../config/zlib.m4 \
	$(top_srcdir)/../bfd/warning.m4 $(top_srcdir)/../config/acx.m4 \
	$(top_srcdir)/../config/depstand.m4 \
	$(top_srcdir)/../config/gettext-sister.m4 \
	$(top_srcdir)/../config/iconv.m4 \
	$(top_srcdir)/../config/largefile.m4 \
	$(top_srcdir)/../config/lcmessage.m4 \
	$(top_srcdir)/../config/lead-dot.m4 \
	$(top_srcdir)/../config/lib-ld.m4 \
	$(top_srcdir)/../config/lib-link.m4 \
	$(top_srcdir)/../config/lib-prefix.m4 \
	$(top_srcdir)/../config/nls.m4 \
	$(top_srcdir)/../config/override.m4 \
	$(top_srcdir)/../config/plugins.m4 \
	$(top_srcdir)/../config/po.m4 \
	$(top_srcdir)/../config/progtest.m4 \
	$(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \
	$(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \
	$(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
am__EXEEXT_1 = sdar$(EXEEXT)
am__EXEEXT_2 = sdranlib$(EXEEXT)
am__EXEEXT_3 = sdobjcopy$(EXEEXT)
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)"
am__EXEEXT_4 = sdnm$(EXEEXT)
am__EXEEXT_5 = $(am__EXEEXT_4)
PROGRAMS = $(bin_PROGRAMS) $(noinst_PROGRAMS)
am__objects_1 = bucomm.$(OBJEXT) version.$(OBJEXT) filemode.$(OBJEXT)
am_sdar_OBJECTS = arparse.$(OBJEXT) arlex.$(OBJEXT) ar.$(OBJEXT) \
	not-ranlib.$(OBJEXT) arsup.$(OBJEXT) rename.$(OBJEXT) \
	binemul.$(OBJEXT) emul_$(EMULATION).$(OBJEXT) $(am__objects_1)
sdar_OBJECTS = $(am_sdar_OBJECTS)
am__DEPENDENCIES_1 =
am_sdnm_OBJECTS = nm.$(OBJEXT) $(am__objects_1)
sdnm_OBJECTS = $(am_sdnm_OBJECTS)
sdnm_LDADD = $(LDADD)
am__objects_2 = rddbg.$(OBJEXT) debug.$(OBJEXT) stabs.$(OBJEXT) \
	ieee.$(OBJEXT) rdcoff.$(OBJEXT)
am__objects_3 = $(am__objects_2) wrstabs.$(OBJEXT)
am_sdobjcopy_OBJECTS = objcopy.$(OBJEXT) not-strip.$(OBJEXT) \
	rename.$(OBJEXT) $(am__objects_3) $(am__objects_1)
sdobjcopy_OBJECTS = $(am_sdobjcopy_OBJECTS)
sdobjcopy_LDADD = $(LDADD)
am_sdranlib_OBJECTS = ar.$(OBJEXT) is-ranlib.$(OBJEXT) \
	arparse.$(OBJEXT) arlex.$(OBJEXT) arsup.$(OBJEXT) \
	rename.$(OBJEXT) binemul.$(OBJEXT) emul_$(EMULATION).$(OBJEXT) \
	$(am__objects_1)
sdranlib_OBJECTS = $(am_sdranlib_OBJECTS)
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
SCRIPTS = $(bin_SCRIPTS)
DEFAULT_INCLUDES = -I.@am__isrc@
depcomp = $(SHELL) $(top_srcdir)/../depcomp
am__depfiles_maybe = depfiles
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
	$(LDFLAGS) -o $@
@MAINTAINER_MODE_FALSE@am__skiplex = test -f $@ ||
LEXCOMPILE = $(LEX) $(LFLAGS) $(AM_LFLAGS)
LTLEXCOMPILE = $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=compile $(LEX) $(LFLAGS) $(AM_LFLAGS)
YLWRAP = $(top_srcdir)/../ylwrap
@MAINTAINER_MODE_FALSE@am__skipyacc = test -f $@ ||
YACCCOMPILE = $(YACC) $(YFLAGS) $(AM_YFLAGS)
LTYACCCOMPILE = $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=compile $(YACC) $(YFLAGS) $(AM_YFLAGS)
SOURCES = $(sdar_SOURCES) $(EXTRA_sdar_SOURCES) $(sdnm_SOURCES) \
	$(sdobjcopy_SOURCES) $(sdranlib_SOURCES)
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-dvi-recursive install-exec-recursive \
	install-html-recursive install-info-recursive \
	install-pdf-recursive install-ps-recursive install-recursive \
	installcheck-recursive installdirs-recursive pdf-recursive \
	ps-recursive uninstall-recursive
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS
ETAGS = etags
CTAGS = ctags
DEJATOOL = $(PACKAGE)
RUNTESTDEFAULTFLAGS = --tool $$tool --srcdir $$srcdir
DIST_SUBDIRS = $(SUBDIRS)
ACLOCAL = @ACLOCAL@
ALLOCA = @ALLOCA@
AMTAR = @AMTAR@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BUILD_DLLTOOL = @BUILD_DLLTOOL@
BUILD_DLLWRAP = @BUILD_DLLWRAP@
BUILD_INSTALL_MISC = @BUILD_INSTALL_MISC@
BUILD_MISC = @BUILD_MISC@
BUILD_NLMCONV = @BUILD_NLMCONV@
BUILD_SRCONV = @BUILD_SRCONV@
BUILD_WINDMC = @BUILD_WINDMC@
BUILD_WINDRES = @BUILD_WINDRES@
CATALOGS = @CATALOGS@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CC_FOR_BUILD = @CC_FOR_BUILD@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DATADIRNAME = @DATADIRNAME@
DEFS = @DEFS@
DEMANGLER_NAME = @DEMANGLER_NAME@
DEPDIR = @DEPDIR@
DLLTOOL_DEFS = @DLLTOOL_DEFS@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EMULATION = @EMULATION@
EMULATION_VECTOR = @EMULATION_VECTOR@
EXEEXT = @EXEEXT@
EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
FGREP = @FGREP@
GENCAT = @GENCAT@
GMSGFMT = @GMSGFMT@
GREP = @GREP@
HDEFINES = @HDEFINES@
INCINTL = @INCINTL@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTOBJEXT = @INSTOBJEXT@
LD = @LD@
LDFLAGS = @LDFLAGS@
LEX = `if [ -f ../flex/flex ]; then echo ../flex/flex; else echo @LEX@; fi`
LEXLIB = @LEXLIB@
LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBINTL_DEP = @LIBINTL_DEP@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBICONV = @LTLIBICONV@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
MSGMERGE = @MSGMERGE@
NLMCONV_DEFS = @NLMCONV_DEFS@
NM = @NM@
NMEDIT = @NMEDIT@
NO_WERROR = @NO_WERROR@
OBJDUMP = @OBJDUMP@
OBJDUMP_DEFS = @OBJDUMP_DEFS@
OBJDUMP_PRIVATE_OFILES = @OBJDUMP_PRIVATE_OFILES@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
POSUB = @POSUB@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
WARN_CFLAGS = @WARN_CFLAGS@
XGETTEXT = @XGETTEXT@
YACC = `if [ -f ../bison/bison ]; then echo ../bison/bison -y -L$(srcdir)/../bison/; else echo @YACC@; fi`
YFLAGS = -d
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
AUTOMAKE_OPTIONS = dejagnu no-dist foreign
ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd

####SUBDIRS = doc po
SUBDIRS = 
tooldir = $(exec_prefix)/$(target_alias)

# Automake 1.10+ disables lex and yacc output file regeneration if
# maintainer mode is disabled.  Avoid this.
am__skiplex = 
am__skipyacc = 
AM_CFLAGS = $(WARN_CFLAGS)

# these two are almost the same program
####AR_PROG=ar
####RANLIB_PROG=ranlib
SDAR_PROG = sdar
SDRANLIB_PROG = sdranlib

# objcopy and strip should be the same program
####OBJCOPY_PROG=objcopy
####STRIP_PROG=strip-new
OBJCOPY_PROG = sdobjcopy

####STRINGS_PROG=strings

####READELF_PROG=readelf

####ELFEDIT_PROG=elfedit

# These should all be the same program too.
####SIZE_PROG=size
SDNM_PROG = sdnm
bin_SCRIPTS = @BUILD_INSTALL_MISC@
EXTRA_SCRIPTS = embedspu

####RENAMED_PROGS = $(NM_PROG) $(STRIP_PROG) $(DEMANGLER_PROG)
RENAMED_PROGS = $(SDNM_PROG)

# Stuff that goes in tooldir/ if appropriate.
####TOOL_PROGS = nm-new strip-new ar ranlib dlltool objdump objcopy
TOOL_PROGS = sdnm sdar sdranlib sdobjcopy
BASEDIR = $(srcdir)/..
BFDDIR = $(BASEDIR)/bfd
INCDIR = $(BASEDIR)/include
AM_CPPFLAGS = -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR) \
	 @HDEFINES@ \
	 @INCINTL@ \
	 -DLOCALEDIR="\"$(datadir)/locale\"" \
	 -Dbin_dummy_emulation=$(EMULATION_VECTOR)


####++HFILES = \
####	arsup.h binemul.h bucomm.h budbg.h \
####	coffgrok.h debug.h dlltool.h dwarf.h elfcomm.h nlmconv.h \
####	objdump.h sysdep.h unwind-ia64.h windres.h winduni.h windint.h \
####	windmc.h
HFILES = \
	arsup.h binemul.h bucomm.h sysdep.h


####++GENERATED_HFILES = arparse.h sysroff.h sysinfo.h defparse.h rcparse.h mcparse.h
GENERATED_HFILES = arparse.h

####++BUILT_SOURCES = $(GENERATED_HFILES)
BUILT_SOURCES = $(GENERATED_HFILES)

####++CFILES = \
####	addr2line.c ar.c arsup.c bin2c.c binemul.c bucomm.c \
####	coffdump.c coffgrok.c cxxfilt.c \
####	dwarf.c debug.c dlltool.c dllwrap.c \
####	elfcomm.c emul_aix.c emul_vanilla.c filemode.c \
####	ieee.c is-ranlib.c is-strip.c maybe-ranlib.c maybe-strip.c \
####	nlmconv.c nm.c not-ranlib.c not-strip.c \
####	objcopy.c objdump.c prdbg.c \
####	od-xcoff.c od-macho.c \
####	rclex.c rdcoff.c rddbg.c readelf.c rename.c \
####	resbin.c rescoff.c resrc.c resres.c \
####	size.c srconv.c stabs.c strings.c sysdump.c \
####	syslex_wrap.c unwind-ia64.c elfedit.c version.c \
####	windres.c winduni.c wrstabs.c \
####	windmc.c mclex.c
CFILES = \
	ar.c arsup.c binemul.c bucomm.c debug.c emul_vanilla.c filemode.c \
	ieee.c nm.c not-ranlib.c not-strip.c objcopy.c rdcoff.c rddbg.c rename.c \
	stabs.c version.c 


####++GENERATED_CFILES = \
####	arparse.c arlex.c sysroff.c sysinfo.c syslex.c \
####	defparse.c deflex.c nlmheader.c rcparse.c mcparse.c
GENERATED_CFILES = \
	arparse.c arlex.c

DEBUG_SRCS = rddbg.c debug.c stabs.c ieee.c rdcoff.c
WRITE_DEBUG_SRCS = $(DEBUG_SRCS) wrstabs.c

##### Extra object files for objdump
####OBJDUMP_PRIVATE_OFILES = @OBJDUMP_PRIVATE_OFILES@

# Code shared by all the binutils.
BULIBS = bucomm.c version.c filemode.c

# Code shared by the ELF related programs.
####ELFLIBS = elfcomm.c
BFDLIB = ../bfd/libbfd.la

####OPCODES = ../opcodes/libopcodes.la
LIBIBERTY = ../libiberty/libiberty.a

####POTFILES = $(CFILES) $(DEBUG_SRCS) $(HFILES)
####po/POTFILES.in: @MAINT@ Makefile
####	for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \
####	  && mv tmp $(srcdir)/po/POTFILES.in
EXPECT = expect
RUNTEST = runtest
CC_FOR_TARGET = ` \
  if [ -f $$r/../gcc/xgcc ] ; then \
    if [ -f $$r/../newlib/Makefile ] ; then \
      echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; \
    else \
      echo $$r/../gcc/xgcc -B$$r/../gcc/; \
    fi; \
  else \
    if [ "@host@" = "@target@" ] ; then \
      echo $(CC); \
    else \
      echo gcc | sed '$(transform)'; \
    fi; \
  fi`


# There's no global DEPENDENCIES.  So, we must explicitly list everything
# which depends on libintl, since we don't know whether LIBINTL_DEP will be
# non-empty until configure time.  Ugh!
####size_DEPENDENCIES =      $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
####objdump_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) $(OPCODES) $(OBJDUMP_PRIVATE_OFILES)
sdnm_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
####ar_DEPENDENCIES =        $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
sdar_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
####strings_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
####strip_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
####ranlib_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
sdranlib_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
####cxxfilt_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
####objcopy_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
sdobjcopy_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
####nlmconv_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
####srconv_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
####sysdump_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
####coffdump_DEPENDENCIES =  $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
####dlltool_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
####windres_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
####windmc_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
####addr2line_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
####readelf_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY)
####elfedit_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY)
####dllwrap_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY)
LDADD = $(BFDLIB) $(LIBIBERTY) $(LIBINTL)

####size_SOURCES = size.c $(BULIBS)

####objcopy_SOURCES = objcopy.c not-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)
sdobjcopy_SOURCES = objcopy.c not-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)

####strings_SOURCES = strings.c $(BULIBS)

####readelf_SOURCES = readelf.c version.c unwind-ia64.c dwarf.c $(ELFLIBS)
####readelf_LDADD   = $(LIBINTL) $(LIBIBERTY)

####elfedit_SOURCES = elfedit.c version.c $(ELFLIBS)
####elfedit_LDADD = $(LIBINTL) $(LIBIBERTY)

####strip_new_SOURCES = objcopy.c is-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)

####nm_new_SOURCES = nm.c $(BULIBS)
sdnm_SOURCES = nm.c $(BULIBS)

####objdump_SOURCES = objdump.c dwarf.c prdbg.c $(DEBUG_SRCS) $(BULIBS) $(ELFLIBS)
####EXTRA_objdump_SOURCES = od-xcoff.c
####objdump_LDADD = $(OBJDUMP_PRIVATE_OFILES) $(OPCODES) $(BFDLIB) $(LIBIBERTY) $(LIBINTL)
####
####objdump.@OBJEXT@:objdump.c
####if am__fastdepCC
####	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c
####	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
####else
####if AMDEP
####	source='objdump.c' object='$@' libtool=no @AMDEPBACKSLASH@
####	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
####endif
####	$(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c
####endif

####cxxfilt_SOURCES = cxxfilt.c $(BULIBS)

####ar_SOURCES = arparse.y arlex.l ar.c not-ranlib.c arsup.c rename.c binemul.c \
####	emul_$(EMULATION).c $(BULIBS)
####EXTRA_ar_SOURCES = $(CFILES)
####ar_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)
sdar_SOURCES = arparse.y arlex.l ar.c not-ranlib.c arsup.c rename.c binemul.c \
	emul_$(EMULATION).c $(BULIBS)

EXTRA_sdar_SOURCES = $(CFILES)
sdar_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)

####ranlib_SOURCES = ar.c is-ranlib.c arparse.y arlex.l arsup.c rename.c \
####	binemul.c emul_$(EMULATION).c $(BULIBS)
####ranlib_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)
sdranlib_SOURCES = ar.c is-ranlib.c arparse.y arlex.l arsup.c rename.c \
	binemul.c emul_$(EMULATION).c $(BULIBS)

sdranlib_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)

####sysroff.@OBJEXT@: sysroff.c
####if am__fastdepCC
####	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
####	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
####else
####if AMDEP
####	source='sysroff.c' object='$@' libtool=no @AMDEPBACKSLASH@
####	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
####endif
####	$(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
####endif

####defparse.@OBJEXT@: defparse.c
####if am__fastdepCC
####	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
####	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
####else
####if AMDEP
####	source='defparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
####	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
####endif
####	$(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
####endif

####deflex.@OBJEXT@: deflex.c
####if am__fastdepCC
####	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
####	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
####else
####if AMDEP
####	source='deflex.c' object='$@' libtool=no @AMDEPBACKSLASH@
####	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
####endif
####	$(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
####endif

####nlmheader.@OBJEXT@: nlmheader.c
####if am__fastdepCC
####	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f nlmheader.c || echo $(srcdir)/`nlmheader.c $(NO_WERROR)
####	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
####else
####if AMDEP
####	source='nlmheader.c' object='$@' libtool=no @AMDEPBACKSLASH@
####	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
####endif
####	$(COMPILE) -c `test -f nlmheader.c || echo $(srcdir)/`nlmheader.c $(NO_WERROR)
####endif

####rcparse.@OBJEXT@: rcparse.c
####if am__fastdepCC
####	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
####	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
####else
####if AMDEP
####	source='rcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
####	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
####endif
####	$(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
####endif

####mcparse.@OBJEXT@: mcparse.c
####if am__fastdepCC
####	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
####	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
####else
####if AMDEP
####	source='mcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
####	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
####endif
####	$(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
####endif

####rclex.@OBJEXT@: rclex.c
####if am__fastdepCC
####	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR)
####	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
####else
####if AMDEP
####	source='rclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
####	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
####endif
####	$(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR)
####endif

####mclex.@OBJEXT@: mclex.c
####if am__fastdepCC
####	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR)
####	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
####else
####if AMDEP
####	source='mclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
####	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
####endif
####	$(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR)
####endif

####srconv_SOURCES = srconv.c coffgrok.c $(BULIBS)
####srconv.@OBJEXT@: sysroff.c

####dlltool_SOURCES = dlltool.c defparse.y deflex.l $(BULIBS)
####dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)

####dlltool.@OBJEXT@:
####if am__fastdepCC
####	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@  $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
####	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
####else
####if AMDEP
####	source='dlltool.c' object='$@' libtool=no @AMDEPBACKSLASH@
####	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
####endif
####	$(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
####endif

####rescoff.@OBJEXT@:
####if am__fastdepCC
####	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@  $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
####	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
####else
####if AMDEP
####	source='rescoff.c' object='$@' libtool=no @AMDEPBACKSLASH@
####	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
####endif
####	$(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
####endif

####coffdump_SOURCES = coffdump.c coffgrok.c $(BULIBS)

####sysdump_SOURCES = sysdump.c $(BULIBS)
####sysdump.@OBJEXT@: sysroff.c

##### coff/sym.h and coff/ecoff.h won't be found by the automatic dependency
##### scripts, since they are only included conditionally.
####nlmconv.@OBJEXT@: nlmconv.c
####if am__fastdepCC
####	ldname=`echo ld | sed '$(transform)'`; \
####	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ \
####	  -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c
####	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
####else
####if AMDEP
####	source='nlmconv.c' object='$@' libtool=no @AMDEPBACKSLASH@
####	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
####endif
####	ldname=`echo ld | sed '$(transform)'`; \
####	$(COMPILE) -c -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c
####endif

####nlmconv_SOURCES = nlmconv.c nlmheader.y $(BULIBS)

####windres_SOURCES = windres.c resrc.c rescoff.c resbin.c rcparse.y rclex.c \
####	winduni.c resres.c $(BULIBS)
####windres_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL) $(LIBICONV)

####windmc_SOURCES = windmc.c mcparse.y mclex.c \
####	winduni.c $(BULIBS)
####windmc_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL) $(LIBICONV)

####dllwrap_SOURCES = dllwrap.c version.c
####dllwrap_LDADD = $(LIBIBERTY) $(LIBINTL)
EXTRA_DIST = arparse.c arparse.h arlex.c nlmheader.c sysinfo.c sysinfo.h \
	syslex.c deflex.c defparse.h defparse.c rcparse.h rcparse.c \
	mcparse.h mcparse.c embedspu.sh


# We extract version from bfd/configure.in, make sure to rerun configure
# when BFD's version changes.
CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/configure.in
DISTCLEANFILES = sysroff.c sysroff.h site.exp site.bak embedspu
MOSTLYCLEANFILES = sysinfo$(EXEEXT_FOR_BUILD) bin2c$(EXEEXT_FOR_BUILD) \
  binutils.log binutils.sum abcdefgh*

all: $(BUILT_SOURCES) config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
.SUFFIXES: .c .l .lo .o .obj .y
am--refresh:
	@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):

config.h: stamp-h1
	@if test ! -f $@; then \
	  rm -f stamp-h1; \
	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
	else :; fi

stamp-h1: $(srcdir)/config.in $(top_builddir)/config.status
	@rm -f stamp-h1
	cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
	rm -f stamp-h1
	touch $@

distclean-hdr:
	-rm -f config.h stamp-h1
install-binPROGRAMS: $(bin_PROGRAMS)
	@$(NORMAL_INSTALL)
	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
	for p in $$list; do echo "$$p $$p"; done | \
	sed 's/$(EXEEXT)$$//' | \
	while read p p1; do if test -f $$p || test -f $$p1; \
	  then echo "$$p"; echo "$$p"; else :; fi; \
	done | \
	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
	sed 'N;N;N;s,\n, ,g' | \
	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
	    else { print "f", $$3 "/" $$4, $$1; } } \
	  END { for (d in files) print "f", d, files[d] }' | \
	while read type dir files; do \
	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
	    test -z "$$files" || { \
	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
	    } \
	; done

uninstall-binPROGRAMS:
	@$(NORMAL_UNINSTALL)
	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
	files=`for p in $$list; do echo "$$p"; done | \
	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
	      -e 's/$$/$(EXEEXT)/' `; \
	test -n "$$list" || exit 0; \
	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(bindir)" && rm -f $$files

uninstall-noinstPROGRAMS:
	@$(NORMAL_UNINSTALL)
	@list='$(noinst_PROGRAMS)'; test -n "$(bindir)" || list=; \
	files=`for p in $$list; do echo "$$p"; done | \
	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
	      -e 's/$$/$(EXEEXT)/' `; \
	test -n "$$list" || exit 0; \
	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(bindir)" && rm -f $$files

clean-binPROGRAMS:
	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
	echo " rm -f" $$list; \
	rm -f $$list || exit $$?; \
	test -n "$(EXEEXT)" || exit 0; \
	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
	echo " rm -f" $$list; \
	rm -f $$list

clean-noinstPROGRAMS:
	@list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \
	echo " rm -f" $$list; \
	rm -f $$list || exit $$?; \
	test -n "$(EXEEXT)" || exit 0; \
	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
	echo " rm -f" $$list; \
	rm -f $$list
arparse.h: arparse.c
	@if test ! -f $@; then \
	  rm -f arparse.c; \
	  $(MAKE) $(AM_MAKEFLAGS) arparse.c; \
	else :; fi
sdar$(EXEEXT): $(sdar_OBJECTS) $(sdar_DEPENDENCIES) 
	@rm -f sdar$(EXEEXT)
	$(LINK) $(sdar_OBJECTS) $(sdar_LDADD) $(LIBS)
sdnm$(EXEEXT): $(sdnm_OBJECTS) $(sdnm_DEPENDENCIES) 
	@rm -f sdnm$(EXEEXT)
	$(LINK) $(sdnm_OBJECTS) $(sdnm_LDADD) $(LIBS)
sdobjcopy$(EXEEXT): $(sdobjcopy_OBJECTS) $(sdobjcopy_DEPENDENCIES) 
	@rm -f sdobjcopy$(EXEEXT)
	$(LINK) $(sdobjcopy_OBJECTS) $(sdobjcopy_LDADD) $(LIBS)
sdranlib$(EXEEXT): $(sdranlib_OBJECTS) $(sdranlib_DEPENDENCIES) 
	@rm -f sdranlib$(EXEEXT)
	$(LINK) $(sdranlib_OBJECTS) $(sdranlib_LDADD) $(LIBS)
install-binSCRIPTS: $(bin_SCRIPTS)
	@$(NORMAL_INSTALL)
	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
	done | \
	sed -e 'p;s,.*/,,;n' \
	    -e 'h;s|.*|.|' \
	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
	      if (++n[d] == $(am__install_max)) { \
		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
	    else { print "f", d "/" $$4, $$1 } } \
	  END { for (d in files) print "f", d, files[d] }' | \
	while read type dir files; do \
	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
	     test -z "$$files" || { \
	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
	     } \
	; done

uninstall-binSCRIPTS:
	@$(NORMAL_UNINSTALL)
	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
	files=`for p in $$list; do echo "$$p"; done | \
	       sed -e 's,.*/,,;$(transform)'`; \
	test -n "$$list" || exit 0; \
	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(bindir)" && rm -f $$files

mostlyclean-compile:
	-rm -f *.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ar.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/arlex.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/arparse.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/arsup.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/binemul.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bucomm.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/debug.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/emul_$(EMULATION).Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/emul_vanilla.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/filemode.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ieee.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/is-ranlib.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/nm.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/not-ranlib.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/not-strip.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/objcopy.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdcoff.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rddbg.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rename.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stabs.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/version.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrstabs.Po@am__quote@

.c.o:
@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(COMPILE) -c $<

.c.obj:
@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`

.c.lo:
@am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<

.l.c:
	$(am__skiplex) $(SHELL) $(YLWRAP) $< $(LEX_OUTPUT_ROOT).c $@ -- $(LEXCOMPILE)

.y.c:
	$(am__skipyacc) $(SHELL) $(YLWRAP) $< y.tab.c $@ y.tab.h $*.h y.output $*.output -- $(YACCCOMPILE)

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool config.lt

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES) config.in $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS) config.in $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.in $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	list='$(SOURCES) $(HEADERS) config.in $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

check-DEJAGNU: site.exp
	srcdir=`$(am__cd) $(srcdir) && pwd`; export srcdir; \
	EXPECT=$(EXPECT); export EXPECT; \
	runtest=$(RUNTEST); \
	if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
	  exit_status=0; l='$(DEJATOOL)'; for tool in $$l; do \
	    if $$runtest $(AM_RUNTESTFLAGS) $(RUNTESTDEFAULTFLAGS) $(RUNTESTFLAGS); \
	    then :; else exit_status=1; fi; \
	  done; \
	else echo "WARNING: could not find \`runtest'" 1>&2; :;\
	fi; \
	exit $$exit_status
site.exp: Makefile
	@echo 'Making a new site.exp file...'
	@echo '## these variables are automatically generated by make ##' >site.tmp
	@echo '# Do not edit here.  If you wish to override these values' >>site.tmp
	@echo '# edit the last section' >>site.tmp
	@echo 'set srcdir $(srcdir)' >>site.tmp
	@echo "set objdir `pwd`" >>site.tmp
	@echo 'set build_alias "$(build_alias)"' >>site.tmp
	@echo 'set build_triplet $(build_triplet)' >>site.tmp
	@echo 'set host_alias "$(host_alias)"' >>site.tmp
	@echo 'set host_triplet $(host_triplet)' >>site.tmp
	@echo 'set target_alias "$(target_alias)"' >>site.tmp
	@echo 'set target_triplet $(target_triplet)' >>site.tmp
	@echo '## All variables above are generated by configure. Do Not Edit ##' >>site.tmp
	@test ! -f site.exp || \
	  sed '1,/^## All variables above are.*##/ d' site.exp >> site.tmp
	@-rm -f site.bak
	@test ! -f site.exp || mv site.exp site.bak
	@mv site.tmp site.exp

distclean-DEJAGNU:
	-rm -f site.exp site.bak
	-l='$(DEJATOOL)'; for tool in $$l; do \
	  rm -f $$tool.sum $$tool.log; \
	done
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU
check: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) check-recursive
all-am: Makefile $(PROGRAMS) $(SCRIPTS) config.h
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-rm -f arlex.c
	-rm -f arparse.c
	-rm -f arparse.h
	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
clean: clean-recursive

clean-am: clean-binPROGRAMS clean-generic clean-libtool \
	clean-noinstPROGRAMS mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
distclean-am: clean-am distclean-DEJAGNU distclean-compile \
	distclean-generic distclean-hdr distclean-libtool \
	distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am:

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am: install-binPROGRAMS install-binSCRIPTS \
	install-exec-local

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am: installcheck-local

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool mostlyclean-local

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS uninstall-noinstPROGRAMS

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \
	check-am ctags-recursive install install-am install-strip \
	tags-recursive

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
	all all-am am--refresh check check-DEJAGNU check-am clean \
	clean-binPROGRAMS clean-generic clean-libtool \
	clean-noinstPROGRAMS ctags ctags-recursive distclean \
	distclean-DEJAGNU distclean-compile distclean-generic \
	distclean-hdr distclean-libtool distclean-tags dvi dvi-am html \
	html-am info info-am install install-am install-binPROGRAMS \
	install-binSCRIPTS install-data install-data-am install-dvi \
	install-dvi-am install-exec install-exec-am install-exec-local \
	install-html install-html-am install-info install-info-am \
	install-man install-pdf install-pdf-am install-ps \
	install-ps-am install-strip installcheck installcheck-am \
	installcheck-local installdirs installdirs-am maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-compile \
	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
	pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
	uninstall-binPROGRAMS uninstall-binSCRIPTS uninstall-noinstPROGRAMS


####check-DEJAGNU: site.exp
####	srcdir=`cd $(srcdir) && pwd`; export srcdir; \
####	r=`pwd`; export r; \
####	LC_ALL=C; export LC_ALL; \
####	EXPECT=$(EXPECT); export EXPECT; \
####	runtest=$(RUNTEST); \
####	if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
####	  CC_FOR_TARGET="$(CC_FOR_TARGET)" CFLAGS_FOR_TARGET="$(CFLAGS)" \
####		$$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \
####			$(RUNTESTFLAGS); \
####	else echo "WARNING: could not find \`runtest'" 1>&2; :;\
####	fi

installcheck-local:
	/bin/sh $(srcdir)/sanity.sh $(bindir)

####addr2line_SOURCES = addr2line.c $(BULIBS)

# The following is commented out for the conversion to automake.
# This rule creates a single binary that switches between ar and ranlib
# by looking at argv[0].  Use this kludge to save some disk space.
# However, you have to install things by hand.
# (That is after 'make install', replace the installed ranlib by a link to ar.)
# Alternatively, you can install ranlib.sh as ranlib.
# ar_with_ranlib: $(ADDL_DEPS) ar.o maybe-ranlib.o
#	$(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
#	-rm -f $(RANLIB_PROG)
#	-ln $(AR_PROG) $(RANLIB_PROG)
#
# objcopy and strip in one binary that uses argv[0] to decide its action.
#
#objcopy_with_strip: $(ADDL_DEPS) objcopy.o maybe-strip.o
#	$(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS)
#	-rm -f $(STRIP_PROG)
#	-ln $(OBJCOPY_PROG) $(STRIP_PROG)

####sysroff.c: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
####	./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c
####	./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c
####	./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c

####sysroff.h: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
####	./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h

####sysinfo$(EXEEXT_FOR_BUILD): sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
####	$(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex.@OBJEXT@

####syslex_wrap.@OBJEXT@: syslex_wrap.c syslex.c sysinfo.h config.h
####	$(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex_wrap.c

####sysinfo.@OBJEXT@: sysinfo.c
####	if [ -r sysinfo.c ]; then \
####	  $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) sysinfo.c ; \
####	else \
####	  $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/sysinfo.c ; \
####	fi

####bin2c$(EXEEXT_FOR_BUILD): bin2c.c
####	$(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c

####embedspu: embedspu.sh Makefile
####	awk '/^program_transform_name=/ {print "program_transform_name=\"$(program_transform_name)\""; next} {print}' < $< > $@
####	chmod a+x $@

# We need these for parallel make.
####sysinfo.h: sysinfo.c

# Disable -Werror, if it has been enabled, since old versions of bison/
# yacc will produce working code which contain compile time warnings.
arparse.@OBJEXT@: arparse.c
@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='arparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)

arlex.@OBJEXT@: arlex.c
@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='arlex.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)

diststuff: $(EXTRA_DIST) info
all: info
mostlyclean-local:
	-rm -rf tmpdir

.PHONY: install-exec-local

install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS)
	@list='$(RENAMED_PROGS)'; for p in $$list; do \
	  if test -f $$p$(EXEEXT); then \
	    echo " $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
	    $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(DESTDIR)$(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
	  else :; fi; \
	done
####	$(mkinstalldirs) $(DESTDIR)$(tooldir)/bin
####	for i in $(TOOL_PROGS); do \
####	  if [ -f $$i$(EXEEXT) ]; then \
####	    j=`echo $$i | sed -e 's/-new//'`; \
####	    k=`echo $$j | sed '$(transform)'`; \
####	    if [ "$(bindir)/$$k" != "$(tooldir)/bin/$$j" ]; then \
####	      rm -f $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \
####	      ln $(DESTDIR)$(bindir)/$$k$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT) >/dev/null 2>/dev/null \
####		|| $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$i$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \
####	    fi; \
####	  else true; \
####	  fi; \
####	done

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
