# The following code snippet from the PERLRUN(1) man page ensures the
# script to be interpreted by the Perl interpreter even if it is started
# to be interpreted as a shell script. It is valid code in Perl as well as
# csh, sh, and work-alike shells.
eval '(exit $?0)' && eval 'exec perl -S $0 ${1+"$@"}'
& eval 'exec /usr/bin/perl -S $0 $argv:q'
        if $running_under_some_shell;
# *****************************************************************************
#  Copyright 2011-2016 Accellera Systems Initiative Inc. (Accellera). All rights reserved.
#  Accellera Systems Initiative, 8698 Elk Grove Bldv Suite 1, #114, Elk Grove, CA 95624, USA
#
#  Copyright 2006-2016 Cadence Design Systems, Inc. All rights reserved.
#  Cadence Design Systems, Inc. 2655 Seely Ave., San Jose, CA, USA
#
#  Copyright 2011-2016 Circuitsutra Technologies Pvt Ltd. All rights reserved.
#  Circuitsutra Technologies Pvt Ltd,
#  Regus, Ground Floor, Tapasya Corp Heights, Sector 126, Noida, 201303, UP, India
#
#  Copyright 2006-2016 Doulos. All rights reserved.
#  Doulos, Church Hatch, 22 Market Place, Ringwood, Hampshire, BH24 1AW, United Kingdom
#
#  Copyright 2014-2016 Fraunhofer-Gesellschaft. All rights reserved.
#  Fraunhofer-Gesellschaft, Postfach 20 07 33, 80007 Munich, Germany
#
#  Copyright 2014-2016 Intel Corp. All rights reserved.
#  Intel Corp., 2200 Mission College Blvd., Santa Clara, CA 95054-1549, USA
#
#  Copyright 2006-2016 Mentor Graphics Corporation. All rights reserved.
#  Mentor Graphics Corporation, 8005 SW Boeckman Road, Wilsonville, OR 97070, USA
#
#  Copyright 2009-2016 OFFIS eV. All rights reserved.
#  OFFIS eV, Escherweg 2, 26121 Oldenburg, Germany
#
#  Copyright 2011-2016 STMicroelectronics International NV. All rights reserved.
#  STMicroelectronics, 39, Chemin de Champ-des-Filles, Plan-Les-Ouates, Geneva, Switzerland
#
#  Copyright 1996-2016 Synopsys, Inc. All rights reserved.
#  Synopsys, Inc., 690 East Middlefield Road Mountain View, CA 94043, USA
#
#  Copyright 2011-2016 Universite Pierre et Marie Curie (UPMC). All rights reserved.
#  Universite Pierre et Marie Curie, b.c. 167, 4 place Jussieu, 75252 Paris, France
#
#  Copyright 2011-2016 XtremeEDA Corporation. All rights reserved.
#  XtremeEDA Corporation, 201-1339 Wellington St. West, Ottowa, Ontario K1Y3B8, Canada
#
#  Licensed under the Apache License, Version 2.0 (the "License");
#  you may not use this file except in compliance with the License.
#  You may obtain a copy of the License at
#
#    http://www.apache.org/licenses/LICENSE-2.0
#
#  Unless required by applicable law or agreed to in writing, software
#  distributed under the License is distributed on an "AS IS" BASIS,
#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#  See the License for the specific language governing permissions and
#  limitations under the License.
# *****************************************************************************
#
#  verify.pl - Regression test script for SystemC 2.0 (and higher).
#
#  Original Author: Martin Janssen, Synopsys, Inc., 2001-01-18
#
# *****************************************************************************
#
#  MODIFICATION LOG - modifiers, enter your name, affiliation, date and
#  changes you are making here.
#
#      Name, Affiliation, Date: Andy Goodrich, Forte Design Systems, 2005-05-05
#  Description of Modification: Added SYSTEMC_PTHREADS environment variable.
#
# *****************************************************************************

# use calling directory for include path
$0 =~ m|^(.*)/|;
push( @INC, $1 );

# set the path to the test suite
&set_systemc_test( $1 );

# flush STDOUT after each print
$oldfh = select( STDOUT ); $| = 1; select( $oldfh );

# remove CR at end of command line sometimes present on Windows
$ARGV[-1] =~ s/\r$//;

&main;


# -----------------------------------------------------------------------------
#  SUB : set_systemc_test
#
#  Set the path to the test suite, either specified by environment variable
#  SYSTEMC_TEST, or derived from the location of this script.
# -----------------------------------------------------------------------------

sub set_systemc_test
{
    local( $dir ) = @_;

    if ( defined $ENV{ 'SYSTEMC_PTHREADS' } )
    {
        $rt_pthreads = " (pthreads)";
    }
    if( defined $ENV{ 'SYSTEMC_TEST' } ) {
        $rt_systemc_test = $ENV{ 'SYSTEMC_TEST' };
    }
    else {
        local( $wdir );
        chop( $wdir = `pwd` );
        chdir( "$dir/.." );
        chop( $rt_systemc_test = `pwd` );
        chdir( "$wdir" );
    }
}


# -----------------------------------------------------------------------------
#  SUB : print_log
#
#  Print routine used instead of 'print' as it allows dupping to output file
#  ($rt_output_file).
# -----------------------------------------------------------------------------

sub print_log
{
    print STDOUT @_;

    if( defined $rt_output_file ) {
        if( ! defined $RT_OUTPUT_FH ) {
            local( $f ) = "$rt_output_dir/$rt_output_file";
            $RT_OUTPUT_FH = $f;
            open( RT_OUTPUT_FH, ">$f" ) ||
                die "Error: cannot open output file '$f'\n";
            # chmod( $rt_file_permissions, "$f" );
        }
        print RT_OUTPUT_FH @_;
    }
}


# -----------------------------------------------------------------------------
#  SUB : create_mail
#
#  Create mail with test results.
# -----------------------------------------------------------------------------

sub create_mail
{
    local( $mail_file ) = "$rt_output_dir/verify.mail";
    open( MAIL, ">$mail_file" ) ||
        die "Error: cannot open mail file '$mail_file'\n";
    # chmod( $rt_file_permissions, "$mail_file" );

    local( $host );
    chop( $host = `hostname` );
    local( $uname_a );
    chop( $uname_a = `uname -a` );
    local( $date );
    chop( $date = `date` );

    local( $pass ) = $#rt_pass + 1;
    local( $fail ) = $#rt_fail + 1;

    printf MAIL "\n";
    printf MAIL "REGRESSION RESULTS for SystemC on %s\n", $host;

    printf MAIL "\n";
    printf MAIL "%s\n", $uname_a;
    printf MAIL "%s\n", $date;

    printf MAIL "\n";
    printf MAIL "SYSTEMC_ARCH : %s %s\n", $rt_systemc_arch, "$rt_pthreads";
    printf MAIL "SYSTEMC_HOME : %s\n", $rt_systemc_home;
    printf MAIL "TLM_HOME     : %s\n", $rt_tlm_home unless !defined($rt_tlm_home);
    printf MAIL "SYSTEMC_TEST : %s\n", $rt_systemc_test;
    printf MAIL " OUTPUT_DIR  : %s\n", $rt_output_dir;

    printf MAIL "\n";
    printf MAIL "Total passed: %d\n", $pass;
    printf MAIL "Total failed: %d\n", $fail;

    printf MAIL "\n";
    printf MAIL "---------------------------------------" .
                "----------------------------------------\n";
    printf MAIL " Tests that passed :\n";
    printf MAIL "---------------------------------------" .
                "----------------------------------------\n";
    foreach $tmp ( @rt_pass ) {
        printf MAIL "%s\n", $tmp;
    }

    printf MAIL "\n";
    printf MAIL "---------------------------------------" .
                "----------------------------------------\n";
    printf MAIL " Tests that failed :\n";
    printf MAIL "---------------------------------------" .
                "----------------------------------------\n";
    foreach $tmp ( @rt_fail ) {
        printf MAIL "%s\n", $tmp;
    }

    printf MAIL "\n";

    close( MAIL );

    $mail_file;
}


# -----------------------------------------------------------------------------
#  SUB : send_mail
#
#  Send mail with test results.
# -----------------------------------------------------------------------------

sub send_mail
{
    local( $mail_file ) = @_;

    local( $header );

$header = <<"EOM";
From: $rt_email_admin (Regression Administrator)
To: $rt_email_dist (Regress Distribution List)
Subject: Regress Report - SystemC
EOM

    local( $mail_prog ) = ( -x "/usr/lib/sendmail" ) ?
        "/usr/lib/sendmail" :
            "/bin/mail";

    open( RT_MAIL_H, "| $mail_prog $rt_email_dist") ||
        die "Error: cannot open mail program '$mail_prog'\n";

    print RT_MAIL_H $header;

    local( $body ) = `cat $mail_file`;
    print RT_MAIL_H $body;

    close( RT_MAIL_H );
}


# -----------------------------------------------------------------------------
#  SUB : compile_results
#
#  Print summary of passing and failing tests.
# -----------------------------------------------------------------------------

sub compile_results
{
    &print_log( "\n*** test results\n" );

    &print_log( "\n" );
    &print_log( "---------------------------------------" .
               "----------------------------------------\n" );
    &print_log( " Tests that passed :\n" );
    &print_log( "---------------------------------------" .
               "----------------------------------------\n" );
    foreach $tmp ( @rt_pass ) {
        &print_log( "$tmp\n" );
    }

    &print_log( "\n" );
    &print_log( "---------------------------------------" .
               "----------------------------------------\n" );
    &print_log( " Tests that failed :\n" );
    &print_log( "---------------------------------------" .
               "----------------------------------------\n" );
    foreach $tmp ( @rt_fail ) {
        &print_log( "$tmp\n" );
    }

    local( $pass ) = $#rt_pass + 1;
    local( $fail ) = $#rt_fail + 1;

    &print_log( "\n" );
    &print_log( "Total passed : " . ( $pass ) . "\n" );
    &print_log( "Total failed : " . ( $fail ) . "\n" );

    use integer;
    local( $gut ) = ( $pass * 100 ) / ( $pass + $fail );

    &print_log( "\n" );
    &print_log( "   GUT METER : " . ( $gut ) . " %\n" );

    local( $script );
    ( $script = $0 ) =~ s|^.*/||;
    local( $host );
    chop( $host = `hostname` );
    local( $uname_a );
    chop( $uname_a = `uname -a` );
    local( $date );
    chop( $date = `date` );

    &print_log( "\n*** $script finished successfully on host $host\n\n" );
    &print_log( "$uname_a\n" );
    &print_log( "$date\n" );
    &print_log( "\n" );

    if( $rt_mail ) {
        local( $mail_file );
        $mail_file = &create_mail;
        &send_mail( $mail_file );
    }
}


# -----------------------------------------------------------------------------
#  SUB : interrupt_handler
#
#  Routine for handling the SIGINT and SIGQUIT signals.
# -----------------------------------------------------------------------------

sub interrupt_handler
{
    local( $signal ) = @_;

    &print_log( "caught SIG$signal\n" );

    if( defined $rt_child_pid ) {
        &print_log( "killing process '$rt_child_pid'\n" );
        kill 'TERM', $rt_child_pid;
    }

    &compile_results;

    exit 1;
}


# -----------------------------------------------------------------------------
#  SUB : alarm_handler
#
#  Routine for handling the SIGALRM signal.
# -----------------------------------------------------------------------------

sub alarm_handler
{
    local( $signal ) = @_;

    &print_log( "caught SIG$signal\n" );

    # kill process and group of processes
    &print_log( "timing out process '$rt_child_pid'\n" );
    kill 'TERM', $rt_child_pid;

    # keep track of timed out tests
    push( @rt_alarm, $rt_current_test );

    # reset the SIGALRM signal handler - needed for Solaris, HP
    $SIG{ 'ALRM' } = 'alarmhandler';
}


# -----------------------------------------------------------------------------
#  SUB : get_systemc_home
#
#  Get the SYSTEMC_HOME environment variable's value.
# -----------------------------------------------------------------------------

sub get_systemc_home
{
    if( ! defined $ENV{ 'SYSTEMC_HOME' } ) {
        &print_log( "Error: " .
                   "environment variable SYSTEMC_HOME is not defined!\n" );
        exit 1;
    }

    my $sysc_home = $ENV{ 'SYSTEMC_HOME' };
    $sysc_home =~ s|\\|/|g ;  # replace any backslash with forward slash
    $sysc_home;
}

# -----------------------------------------------------------------------------
#  SUB : get_tlm_home
#
#  Get the TLM_HOME environment variable's value, it it exists.
#  Otherwise set TLM_HOME to SYSTEMC_HOME
#  TLM_HOME should be set to the directory containing tlm.h
#
# -----------------------------------------------------------------------------

sub get_tlm_home
{
    my $tlm_home;

    if( defined $ENV{ 'TLM_HOME' } ) {

      $tlm_home = $ENV{ 'TLM_HOME' };

    } elsif ( defined $ENV{ 'SYSTEMC_HOME' } ) {

      $tlm_home = undef;

    } else {

        &print_log( "Error: " .
                    "TLM environment: neither TLM_HOME nor SYSTEMC_HOME are defined!\n" );
             exit 1;

    }

    $tlm_home =~ s|\\|/|g ;  # replace any backslash with forward slash
    $tlm_home;
}

# -----------------------------------------------------------------------------
#  SUB : cxx_is_gcc_compatible
#
#  Check, whether compiler is GCC compatible
# -----------------------------------------------------------------------------
sub cxx_is_gcc_compatible
{
    my $cxx = $_[0];
    my $gcc_chk="( echo '#ifdef __GNUC__' ;"
                ." echo IS_GCC_COMPATIBLE ; "
                ." echo '#endif' )";
    $gcc_chk=` $gcc_chk | $cxx -E - 2>/dev/null `;
    scalar( $gcc_chk =~ /IS_GCC_COMPATIBLE/ );
}

# -----------------------------------------------------------------------------
#  SUB : get_systemc_arch
#
#  Get the target architecture.
# -----------------------------------------------------------------------------

sub get_systemc_arch
{
    local( $uname_s ) = `uname -s`;
    local( $uname_r ) = `uname -r`;
    local( $uname_m ) = `uname -m`;
    local( $arch )    = $rt_systemc_arch; # check for override
    local( $cxx );
    local( $cxx_comp );

    chop( $uname_m );
    chop( $uname_s );
    chop( $uname_r );

    if( defined $ENV{ 'CXX' } ) {
        $cxx = $ENV{ 'CXX' };
    } else {
        $cxx = "g++";
    }
    chop( $cxx_comp = `basename $cxx` );

    if( defined $ENV{'SYSTEMC_ARCH'} ) {
         $arch = $ENV{'SYSTEMC_ARCH'} unless ($arch);
    }

    if( !$arch ) {
        # arch not explicitly set, detect automatically

        if( $uname_s eq "SunOS" and $uname_r =~ /^5/ ) {
            if( $cxx_comp eq "CC" ) {
                $arch = "sparcOS5";
            } elsif( cxx_is_gcc_compatible($cxx) ) {
                $arch = "gccsparcOS5";
            }

        } elsif( $uname_s eq "HP-UX" and $uname_r =~ /^B.11/ ) {
            if( $cxx_comp eq "aCC" ) {
                $arch = "hpux11";
            } elsif( cxx_is_gcc_compatible($cxx) ) {
                $arch = "gcchpux11";
            }

        } elsif( $uname_s eq "Darwin" ) {
            if( cxx_is_gcc_compatible($cxx) )
            {
                $arch = "macos";
                if ( $uname_m eq "x86_64" || $uname_m eq "amd64" ) {
                    $arch .= "x64";
                }
                elsif ( $uname_m eq "arm64" ) {
                    $arch .= "arm64";
                }
            }

        } elsif( $uname_s eq "Linux" ) {
            if( cxx_is_gcc_compatible($cxx) ) {
                $arch = "linux";
                if ( $uname_m eq "x86_64" || $uname_m eq "amd64" ) {
                    $arch .= "64";
                }
                elsif ( $uname_m eq "aarch64" ) {
                    $arch .= $uname_m;
                }
            }

        } elsif( $uname_s =~ /((free|net|open)bsd|dragonfly)/i ) {
            if( cxx_is_gcc_compatible($cxx) ) {
                $arch = "bsd";
                if ( $uname_m eq "x86_64" || $uname_m eq "amd64" ) {
                    $arch .= "64";
                }
            }

        } elsif( $uname_s =~ /^(CYGWIN|MINGW32|MINGW64)_NT/ ) {

                # check windows compiler
            if( $cxx_comp =~ /^cl(\.exe)?$/i ) {
                #find MSVC version
                #reassign stderr and stdout
                open SAVEOUT, ">&STDOUT";
                open SAVERR, ">&STDERR";
                open STDOUT, ">tempfile.out" or die "Can't redirect stdout";
                open STDERR, ">&STDOUT" or die "Can't dup stdout";
                select STDERR; $| = 1;
                select STDOUT; $| = 1;

                qx /cl/;   #cl returns version number in stderr

                #restore stderr and stdout
                close STDOUT;
                close STDERR;
                open STDOUT, ">&SAVEOUT";
                open STDERR, ">&SAVERR";

                #get version string and delete tempfile
                open(CL_STRING, "<tempfile.out");
                $v_string = join ( "", <CL_STRING>);
                unlink "tempfile.out";

                if ( $v_string =~ /.+Version 12\.00/ ) {
                    $arch = "msvc60";
                    # VC 6.0 (no longer supported)
                    die "Error: unsupported architecture '$arch'\n";
                }
                elsif ( $v_string =~ /.+Version 13\.10/ )  { # 2003
                    $arch = "msvc71";
                }
                elsif ( $v_string =~ /.+Version 14\.00/ )  { # 2005
                    $arch = "msvc80";
                }
                elsif ( $v_string =~ /.+Version 15\.00/) {   # 2008
                    $arch = "msvc90";
                }
                elsif ( $v_string =~ /.+Version 16\.00/) {   # 2010
                    $arch = "msvc10";
                }
                elsif ( $v_string =~ /.+Version 17\.00/) {   # 2012
                    $arch = "msvc11";
                }
                elsif ( $v_string =~ /.+Version 18\.00/) {   # 2013
                    $arch = "msvc12";
                }
                elsif ( $v_string =~ /.+Version 19\.00/) {   # 2015
                    $arch = "msvc14";
                }
                elsif ( $v_string =~ /.+Version 19\.1/) {   # 2017
                    $arch = "msvc15"; 
                }
                elsif ( $v_string =~ /.+Version 19\.2/) {   # 2019
                    $arch = "msvc16"; 
                }
                elsif ( $v_string =~ /.+Version 19\.3/) {   # 2022
                    $arch = "msvc17"; 
                }
                else {
                    die "Error: unsupported compiler '$cxx' ($v_string)\n";
                }

                # check for Win64 compiler
                if ( $v_string =~ /for x64/ ) { # TODO: improve check
                    $arch .= "-x64";
                }

            } elsif( cxx_is_gcc_compatible($cxx) ) {
                # use MinGW/Cygwin GCC compiler
                if( $uname_s =~ /^CYGWIN_NT/ ) {
                    # TODO: detect 64-bit capability
                    $arch  = "cygwin";
                } else {
                    if( ($uname_m eq "i686") || ($uname_m eq "x86_64") )
                    {
                       $arch = "mingw64";
                    }
                    else
                    {
                       $arch  = "mingw"; # 32-bit
                    }
                }
            }
        }
    } # arch detection

    if( !$arch ) {
        die "Error: unsupported compiler '$cxx' or"
                 ." architecture '$uname_s $uname_r'\n";
    }

    # check arch and set architecture specific options

    if( $arch =~ /^macos(x|arm)?(64)?/ ) {
        if( $1 eq 'arm' ) {
            $rt_cpuarch = "arm$2";
        } else {
            if( $2 eq '64' ) {
                $rt_cpuarch = "x86_64";
            } else {
                $rt_cpuarch = "i686";
            }
        }
    }

    elsif( $arch =~ /^(linux|(free)?bsd|mingw|cygwin)(64)?/ ) {
        if( $3 eq '64' ) {
            $rt_cpuarch = $3;
        } else {
            $rt_cpuarch = '32';
        }
    }

    elsif( $arch =~ /^(gcc)?(sparcOS5|hpux11)/ ) {
        # do nothing
    }

    elsif( $arch =~ /^msvc/ ) {
        # do nothing
    }

    $rt_cc = $cxx;
    $arch;
}


# -----------------------------------------------------------------------------
#  SUB : init_globals
#
#  Initialization routine.
# -----------------------------------------------------------------------------

sub init_globals
{
    # setup signal handlers
    $SIG{ 'INT' }  = 'interrupt_handler';
    $SIG{ 'QUIT' } = 'interrupt_handler';
    $SIG{ 'ALRM' } = 'alarm_handler';

    $rt_cleanup = 1;                    # cleanup temp dirs by default
    $rt_mail = 0;                       # send mail with results
    $rt_email_admin = "";
    $rt_email_dist = "";
    $rt_max_file_size = 500000;         # limit the max size of the output file
    chop( $rt_output_dir = `pwd` );     # directory for output logs
    $rt_prodname = "systemc.exe";       # simulation executable name
    $rt_quick_tests = 0;
    $rt_makefile = 0;
    $rt_tests_dir = "$rt_systemc_test";
    $rt_common_include_dir = "include/common"; # relative to $rt_systemc_test
    $rt_time_tests = 0;
    $rt_verbose  = 0;

    $rt_opts = '';                      # options to use for compile
    if( defined $ENV{ 'RT_OPTS' } ) {
        $rt_opts = $ENV{ 'RT_OPTS' };
    }
    $rt_output_file = "verify.log";     # copy output to file
    $rt_props = 0;                      # global properties (from args/config)
    $rt_diag = 0;                       # diag mode
    $rt_timeout = 0;                    # timeout in min (zero for off)
    %rt_testlist = ();

    # set the property file names
    $rt_dontrun = "DONTRUN";
    $rt_compile = "COMPILE";
    $rt_ig_retval = "IG_RETVAL";

    # file and directory permissions
    $rt_file_permissions = 0666;
    $rt_dir_permissions  = 0777;

    $ENV{ 'SYSTEMC_REGRESSION' } = 1;

    # MSVC runtime library defaults
    $rt_msvc_runtime     = '-MD';
    $rt_msvc_runtime_dbg = $rt_msvc_runtime.'d';

    @rt_add_defines = ();
    if( defined $ENV{ 'RT_ADD_DEFINES' } ) {
        push( @rt_add_defines, split(' ', $ENV{ 'RT_ADD_DEFINES' } ) )
            unless( !$ENV{ 'RT_ADD_DEFINES' } );
    }

    @rt_add_includes = ();
    if( defined $ENV{ 'RT_ADD_INCLUDES' } ) {
        push( @rt_add_includes, split(' ', $ENV{ 'RT_ADD_INCLUDES' } ) )
            unless( !$ENV{ 'RT_ADD_INCLUDES' } );
    }

    @rt_add_ldpaths = ();  # additional link paths
    if( defined $ENV{ 'RT_ADD_LDPATHS' } ) {
        push( @rt_add_ldpaths, split( ' ', $ENV{ 'RT_ADD_LDPATHS' } ) )
            unless( !$ENV{ 'RT_ADD_LDPATHS' } );
    }
    @rt_add_ldlibs = ();   # additional link libraries
    if( defined $ENV{ 'RT_ADD_LDLIBS' } ) {
        push( @rt_add_ldlibs, split( ' ', $ENV{ 'RT_ADD_LDLIBS' } ) )
            unless( !$ENV{ 'RT_ADD_LDLIBS' } );
    }
    $rt_add_filter = '';   # additional filter for scl_strip
    if( defined $ENV{ 'RT_ADD_FILTER' } ) {
        $rt_add_filter = $ENV{ 'RT_ADD_FILTER' };
    }

    # Defines for properties
    %rt_test_props = ( 'comp_only',  0x1,
                       'ig_retval',  0x2,
                       'debug',      0x4,    # compile with debug flag
                       'purify',     0x8,    # link with purify
                       'quantify',   0x10,   # link with quantify
                       'dontrun',    0x20,   # dir marked dontrun or
                                             #   is not for this arch
                       'optimize',   0x40,   # compile with optimize flag
                       'purecov',    0x80,   # link with purecov
                       'windll',     0x100   # link against DLL (Windows)
                     );

    # Defines for striplog functions
    $rt_sim_pat        = '^SystemC';
    $rt_strip_head_pat = '^SystemC Simulation';
    $rt_strip_tail_pat = '^End of SystemC Simulation';

    %rt_test_type = ( 's', 'cpp',            # single test (SystemC c++)
                      'f', 'f',              # include (-f) file
                      'c', 'mk',             # c shell test
                      'i', 'in',             # input file
                      'scr', 'scr'           # script file
                      );

    # Defines the returned error codes and classifed failures
    # depending on where in run_test the error occurs
    %rt_error_code = (
        'fvvc',               '              linking              ',
        'fcomp',              '             compiling             ',
        'fsym',               '              running              ',
        'fdiff',              '                diff               ',
        'missolog',           '          missing outlog           ',
        'difffile',           '            diff file              ',
        'diff_prog_fail',     '        diff prog failed           ',
        'o_exst_stp_input',   '         missing outlog            ',
        'g_exst_stp_input',   '         missing golden            ',
        'o_copen_stp_input',  '      open outlog for strip        ',
        'g_copen_stp_input',  '      open golden for strip        ',
        'o_bad_sim_type',     '     bad/no sim name in outlog     ',
        'g_bad_sim_type',     '     bad/no sim name in golden     ',
        'o_copen_stp_output', '     open output for strip outlog  ',
        'g_copen_stp_output', '     open output for strip golden  ',
        'o_copen_stdout',     'open stdout for outlog strip output',
        'g_copen_stdout',     'open stdout for golden strip output',
        'pass',               '              passed               ',
        'skip',               '              skipped              ',
        'unknown',            '          unknown problem          '
    );

    $rt_systemc_run_tool = '';   # default: do not run tests under a tool

}

# -----------------------------------------------------------------------------
#  SUB : add_to_ldpath
#
#  Add a directory to the library search path, if it exists.
#
#  Prefer an arch-specific suffix first.  In case an optional second argument
#  is given, it is used as a specific relative path on MSVC, that is interleaved
#  with the different suffixes according to the patterns below.
#
#  The following locations are checked for a given `$dir' (+ optional `$local`)
#  and the _first_ match is returned:
#
#  Unix-like architectures:
#    1. `$dir/lib-<arch>`
#    2. `$dir-<arch>`
#    3. `$dir/lib`
#    4. `$dir`
#
#  MS Visual C++ (assuming `<config>` matches `Debug` or `Release`):
#    1. `$dir/msvc<ver>/$local/x64/<config>`  (64-bit only)
#    2. `$dir/$local/x64/<config>`            (64-bit only)
#    2. `$dir/msvc<ver>/$local/<config>`
#    3. `$dir/$local/<config>`
#    4. `$dir`
#
# -----------------------------------------------------------------------------

sub add_to_ldpath
{
    my ( $dir, $local ) = @_;
    my @candidates = ();

    &print_log( "\nDIAG: check ldpath '$dir'\n" ) if $rt_diag >= 4;

    if( $rt_systemc_arch =~ /^(msvc[0-9]*)(-x64)?$/ ) {
        my $msvc = "/$1";
        my $x64  = $2;
        my $suffix;
        $x64 =~ s|-|/|;

        $local = "/$local" if ( $local );

        if( $rt_props & $rt_test_props{ 'debug' } ) {
            $suffix = '/Debug';
        } else {
            $suffix = '/Release';
        }

        if( $rt_props & $rt_test_props{ 'windll' } ) {
            $suffix .= 'DLL';
        }

        push @candidates, "$dir$msvc$local$x64$suffix" if ( -d "$dir$msvc$local$x64$suffix" );
        push @candidates, "$dir$local$x64$suffix"      if ( -d "$dir$local$x64$suffix" );
        push @candidates, "$dir$msvc$local$suffix"     if ( -d "$dir$msvc$local$suffix" );
        push @candidates, "$dir$local$suffix"          if ( -d "$dir$local$suffix" );
        push @candidates, "$dir$local$suffix"          if ( -d "$dir$local$suffix" );

    } else {
        my $lib   = "/lib";
        my $lib64 = "/lib64";
        my $arch  = "-$rt_systemc_arch";
        push @candidates, "$dir$lib$arch"        if ( -d "$dir$lib$arch" );
        push @candidates, "$dir$arch"            if ( -d "$dir$arch" );
        push @candidates, "$dir$lib"             if ( -d "$dir$lib" );
        push @candidates, "$dir$lib64"           if ( -d "$dir$lib64" );
    }

    # use given (existing) directory directly
    push @candidates, $dir if ( -d "$dir" );

    &print_log( "WARN: ignoring invalid ldpath '$dir'\n" )
      unless scalar @candidates;

    &print_log( "DIAG: add ldpath '".$candidates[0]."'\n" )
      if scalar @candidates && $rt_diag >= 2;

    # return first found directory
    ( scalar @candidates ) ? ( $candidates[0] ) : ();
}

# -----------------------------------------------------------------------------
#  SUB : prepare_environment
#
#  Setup compiler/architecture environment.
# -----------------------------------------------------------------------------

sub prepare_environment
{

    $rt_systemc_arch = &get_systemc_arch;
    $rt_systemc_home = &get_systemc_home;
    $rt_tlm_home     = &get_tlm_home;

    # Set compiler and compiler flags
    #
    # defaults
    $rt_ccflags       = "-Wall";
    $rt_ld            = $rt_cc;
    $rt_ldflags       = $rt_ccflags;
    $rt_ldrpath       = "-Wl,-rpath=";
    $rt_debug_flag    = "-g";
    $rt_debug_ldflags = "";
    $rt_optimize_flag = "-O2";
    $rt_systemc_include = "$rt_systemc_home/include";
    $rt_systemc_ldpath  = "$rt_systemc_home";

    # predefined macros
    @rt_defines = ();
    push @rt_defines, 'SC_ENABLE_ASSERTIONS';

    if( $rt_systemc_arch eq "gccsparcOS5" ) {
        $rt_ldrpath       = "-Wl,-R";
    } elsif( $rt_systemc_arch eq "sparcOS5" ) {
        $rt_ccflags       = "";
        $rt_ldflags       = "-xildoff";
        $rt_ldrpath       = "-Wl,-R";
        $rt_optimize_flag = "-O3";
    } elsif( $rt_systemc_arch eq "gcchpux11" ) {
        #use defaults
    } elsif( $rt_systemc_arch eq "hpux11" ) {
        $rt_ccflags       = "-Aa -ext +DA2.0 +DS2.0";
        $rt_optimize_flag = "+O1";
    } elsif( $rt_systemc_arch =~ /^linux(?!aarch64)(64)?/ ) {
        $rt_ccflags      .= " -m${rt_cpuarch}";
        $rt_ldflags       = $rt_ccflags;
    } elsif( $rt_systemc_arch =~ /^(free)?bsd(64)?/ ) {
        $rt_ccflags      .= " -m${rt_cpuarch}";
        $rt_ldflags       = $rt_ccflags;
    } elsif( $rt_systemc_arch =~ /^macos(x|arm)?(64)?/ ) {
        $rt_ccflags      .= " -arch ${rt_cpuarch} ";
        $rt_ldflags       = $rt_ccflags;
        $rt_optimize_flag = "-O3";
        $rt_ldrpath       = "-Wl,-rpath -Wl,";
    } elsif( $rt_systemc_arch =~ /^cygwin(64)?/ ) {
        $rt_ccflags      .= " -m${rt_cpuarch}";
        $rt_ldflags       = $rt_ccflags." -Wl,--enable-auto-import";
    } elsif( $rt_systemc_arch =~ /^mingw(64)?/ ) {
        $rt_ccflags      .= " -m${rt_cpuarch}";
        $rt_ldflags       = $rt_ccflags;
        # use defaults
    } elsif( $rt_systemc_arch =~ /^(msvc[0-9]*)(-x64)?$/ ) {
        my $msvc = $1;
        my $x64  = $2;
        $x64 =~ s|-|/|;
        $rt_cc              = "CL.EXE";
        $rt_ccflags         = "-nologo -GR -EHsc -Zm800 -vmg";
        $rt_ccflags        .= " -MACHINE:X64" unless (!$x64);
        $rt_ld              = "LINK.EXE";
        $rt_ldflags         = "-nologo -SUBSYSTEM:CONSOLE";
        $rt_ldflags        .= " -MACHINE:X64" unless (!$x64);
        $rt_debug_flag      = "-RTC1 -Zi";
        $rt_debug_ldflags   = "-DEBUG -PDB:$rt_prodname.pdb";

        $rt_systemc_include = "$rt_systemc_home/src"
            unless -d $rt_systemc_include;

        push @rt_defines, 'SC_WIN_DLL'
          unless (!($rt_props & $rt_test_props{'windll'}));

        push @rt_defines, '_USE_MATH_DEFINES';
    }

    # include directories
    @rt_includes = ();
    push( @rt_includes, $rt_tlm_home ) if defined( $rt_tlm_home );
    push( @rt_includes, $rt_systemc_include );

    # libraries paths
    @rt_ldpaths  = add_to_ldpath( $rt_systemc_ldpath, "systemc" );
    # libraries (basenames only)
    @rt_ldlibs   = ( "systemc" );
    push( @rt_ldlibs, "pthread" ) unless (!$rt_pthreads);

    # add additional predefined macros
    push( @rt_defines, @rt_add_defines );

    # prepend common include directory, if exists
    push ( @rt_add_includes, "$rt_systemc_test/$rt_common_include_dir" )
        unless (!-d "$rt_systemc_test/$rt_common_include_dir" );

    # additional include directories
    unshift ( @rt_includes, @rt_add_includes );

    # additional libraries
    push( @rt_ldpaths, map { add_to_ldpath($_) } @rt_add_ldpaths );
    push( @rt_ldlibs,  @rt_add_ldlibs );

    # prepend library paths to $PATH, if running against Windows DLL
    if( $rt_props & $rt_test_props{'windll'} ) {
        $ENV{'PATH'} = join( ":", @rt_ldpaths).":".$ENV{'PATH'};
    }
}


# -----------------------------------------------------------------------------
#  SUB : usage
#
#  Prints the usage.
# -----------------------------------------------------------------------------

sub usage
{
    print <<"EOM";
Usage: $0 [<options>] <directories|names>

  Arguments:
    <directories>  Search for tests in the specified directories.
    <names>        Run tests using the specified names as basenames.
                   Unless the extension is also given, all tests
                   sharing the same basename will be run.
    <options>
      -no-cleanup  Do not clean up temporary files and directories.
      -arch <arch> Override SystemC architecture.
      -dll         Link against SystemC DLL (Windows/MSVC only).
      -D <symbol>  Additional predefined macros (may be added multiple times).
      -f <file>    Use file to supply tests.
      -g           Compile tests with debug flag.
      -I <dir>     Additional include directory (may be added multiple times).
      -L <dir>     Additional linker directory (may be added multiple times).
      -l <libname> Additional library to link (may be added mutliple times).
      -M(D,T)[d]   Select MSVC runtime library (default: ${rt_msvc_runtime}[d]).
      -m           Send mail with results.
      -o <opts>    Additional (custom) compiler options.
      -O           Compile tests with optimize flag.
      -M           Generate Makefile for running tests (in parallel)
      -purecov     Link tests with purecov.
      -purify      Link tests with purify.
      -quantify    Link tests with quantify.
      -Q           Run quick tests only.
      -recheck     Run previously failed tests (taken from $rt_output_file).
      -run-tool    Specify a tool that the test will run under
                   (e.g., valgrind or perf).
      -t <time>    Set the timeout for a test in minutes (default 5 minutes).
      -T           Measure runtime of tests in seconds.
      -v           Verbose output.

EOM
    exit 1;
}


# -----------------------------------------------------------------------------
#  SUB : parse_args
#
#  Parse the command line arguments.
# -----------------------------------------------------------------------------

sub parse_args
{
    local( @arglist ) = @_;

    # print usage if no arguments
    &usage if( $#arglist < 0 );

    local( $tests ) = '';
    local( $files ) = '';

    while( $#arglist >= 0 ) {

        # next argument
        local( $arg ) = shift @arglist;

        if( $arg =~ /^-/ ) {  # must be -arg

            # help
            if( $arg =~ /^-h/ ) {
                &usage;
                exit;
            }

            # do not cleanup
            if( $arg =~ /^-no-cleanup/ ) {
                $rt_cleanup = 0;
                $rt_mk_opts .= "$arg ";
                next;
            }

            # override SystemC architecture.
            if( $arg =~ /^-arch/ ) {
                $arg = shift @arglist;
                $rt_systemc_arch = $arg;
                $rt_mk_opts .= "$arg ";
                next;
            }

            # add predefined macro
            if( $arg =~ /^-D(.*)/ ) {
                if( length($1) ) {
                    $arg = $1;
                } else {
                    $arg = shift @arglist;
                }
                push @rt_add_defines, $arg;
                $rt_mk_opts .= "$arg ";
                next;
            }

            # include file
            if( $arg =~ /^-f/ ) {
                $arg = shift @arglist;
                $files .= ( $files eq '' ) ? "$arg" : " $arg";
                $rt_mk_opts .= "$arg ";
                next;
            }

            # compile with debug flag
            if( $arg =~ /^-g/ ) {
                $rt_props = $rt_props | $rt_test_props{ 'debug' };
                $rt_mk_opts .= "$arg ";
                next;
            }

            # add include directory
            if( $arg =~ /^-I(.*)/ ) {
                if( length($1) ) {
                    $arg = $1;
                } else {
                    $arg = shift @arglist;
                }
                push @rt_add_includes, $arg;
                $rt_mk_opts .= "$arg ";
                next;
            }

            # add linker directory
            if( $arg =~ /^-L(.*)/ ) {
                if( length($1) ) {
                    $arg = $1;
                } else {
                    $arg = shift @arglist;
                }
                push @rt_add_ldpaths, $arg;
                $rt_mk_opts .= "$arg ";
                next;
            }

            # add library to link
            if( $arg =~ /^-l(.*)/ ) {
                if( length($1) ) {
                    $arg = $1;
                } else {
                    $arg = shift @arglist;
                }
                push @rt_add_ldlibs, $arg;
                $rt_mk_opts .= "$arg ";
                next;
            }

            # MSVC runtime library
            if( $arg =~ /^-M(D|T)d?$/ ) {
                $rt_msvc_runtime     = $arg;
                $rt_msvc_runtime_dbg = $arg; # override both runtimes explicitly
                $rt_mk_opts .= "$arg ";
                next;
            }

            # link against SystemC DLL (Windows)
            if( $arg =~ /^-dll$/ ) {
                $rt_props = $rt_props | $rt_test_props{ 'windll' };
                # force DLL-based runtimes
                $rt_msvc_runtime     =~ s/T/D/;
                $rt_msvc_runtime_dbg =~ s/T/D/;
                $rt_mk_opts .= "$arg ";
                next;
            }

            # send mail with results
            if( $arg =~ /^-m/ ) {
                $rt_mail = 1;
                $rt_mk_opts .= "$arg ";
                next;
            }

            # additional compiler options
            if( $arg =~ /^-o/ ) {
                $arg = shift @arglist;
                $rt_opts .= ( $rt_opts eq '' ) ? "$arg" : " $arg";
                $rt_mk_opts .= "$arg ";
                next;
            }

            # compile with optimize flag
            if( $arg =~ /^-O/ ) {
                $rt_props = $rt_props | $rt_test_props{ 'optimize' };
                $rt_mk_opts .= "$arg ";
                next;
            }

            # Generate Makefile
            if( $arg =~ /^-M/ ) {
                $rt_makefile = 1;
                next;
            }

            # link with purecov
            if( $arg =~ /^-purecov/ ) {
                $rt_props = $rt_props | $rt_test_props{ 'purecov' };
                $rt_mk_opts .= "$arg ";
                next;
            }

            # link with purify
            if( $arg =~ /^-purify/ ) {
                $rt_props = $rt_props | $rt_test_props{ 'purify' };
                $rt_mk_opts .= "$arg ";
                next;
            }

            # link with quantify
            if( $arg =~ /^-quantify/ ) {
                $rt_props = $rt_props | $rt_test_props{ 'quantify' };
                $rt_mk_opts .= "$arg ";
                next;
            }

            # run quick tests only
            if( $arg =~ /^-Q/ ) {
                $rt_quick_tests = 1;
                $rt_mk_opts .= "$arg ";
                next;
            }

            # re-check previously failing tests
            if( $arg =~ /^-recheck/ ) {
                open( OLD_OUTPUT_FH, "<$rt_output_file" )
                  or die "Error: Cannot open output of previous run (-recheck)\n";
                while( my $line = <OLD_OUTPUT_FH> ) {
                    if( $line =~ /^(.*) : (.*)$/ ) {
                        my $old_test = $2;
                        if( grep { $_ eq $1 } %rt_error_code ) {
                            $tests .= ' '.$old_test;
                        }
                    }
                }
                close OLD_OUTPUT_FH;
                $rt_mk_opts .= "$arg ";
                next;
            }

            # timeout value
            if( $arg =~ /^-t/ ) {
                $arg = shift @arglist;
                $rt_timeout = $arg;
                $rt_mk_opts .= "$arg ";
                next;
            }

            # time tests
            if( $arg =~ /^-T/ ) {
                $rt_time_tests = 1;
                $rt_mk_opts .= "$arg ";
                next;
            }

            # verbose
            if( $arg =~ /^-v/ ) {
                $rt_verbose = 1;
                $rt_mk_opts .= "$arg ";
                next;
            }

            # suppress error messages
            if( $arg =~ /^-e/ ) {
                $rt_err_wrn_msg = 1;
                $rt_mk_opts .= "$arg ";
                next;
            }

            if( $arg =~ /^-run-tool/ ) {
                $arg = shift @arglist;
                $rt_systemc_run_tool = $arg;
                next;
            }

            die "Error: unknown argument '$arg'\n";
        }

        # must be test
        else {
            $tests .= ( $tests eq '' ) ? "$arg" : " $arg";
        }
    }

    if ($tests eq '' && $rt_makefile == 1) {
        $tests = '.'
    }

    # print usage if no tests specified
    &usage if( $tests eq '' ) && ( $files eq '' );

    ( $tests, $files );
}


# -----------------------------------------------------------------------------
#  SUB : print_intro
#
#  Print the intro.
# -----------------------------------------------------------------------------

sub print_intro
{
    local( $script );
    ( $script = $0 ) =~ s|^.*/||;
    local( $host );
    chop( $host = `hostname` );
    local( $uname_a );
    chop( $uname_a = `uname -a` );
    local( $date );
    chop( $date = `date` );

    &print_log( "\n*** $script started on host $host\n\n" );
    &print_log( "$uname_a\n" );
    &print_log( "$date\n" );

    &print_log( "\n*** settings\n\n" );
    &print_log( "SYSTEMC_ARCH : $rt_systemc_arch $rt_pthreads\n" );
    local( $working_view ) = '';
    local( $ct ) = "/usr/atria/bin/cleartool";
    if( -x $ct ) {
        $working_view = `$ct pwv -short`;
        chop( $working_view );
    }
    local( $vob ) = "/vobs/abc/src/scenic/scenery";
    &print_log( "SYSTEMC_HOME : " );
    if( $rt_systemc_home =~ m|^$vob| ) {
        &print_log( "[$working_view] " );
    }
    &print_log( "$rt_systemc_home\n" );
    &print_log( "TLM_HOME     : " );
    if( defined($rt_tlm_home) ) {
      if( $rt_tlm_home =~ m|^$vob| ) {
          &print_log( "[$working_view] " );
      }
      &print_log( "$rt_tlm_home\n" );
    } else {
      &print_log( "<inherited>\n" );
    }
    &print_log( "SYSTEMC_TEST : " );
    if( $rt_systemc_test =~ m|^$vob| ) {
        &print_log( "[$working_view] " );
    }
    &print_log( "$rt_systemc_test\n" );
    &print_log( " OUTPUT_DIR  : " );
    if( $rt_output_dir =~ m|^$vob| ) {
        &print_log( "[$working_view] " );
    }
    &print_log( "$rt_output_dir\n" );

    &print_log( "\n*** running tests\n" );
}


# -----------------------------------------------------------------------------
#  SUB : get_props
#
#  - Find properties for directory;
#  - find directory test type (single, include, shell);
#  - return bits representing properties;
#  - return list of test files.
# -----------------------------------------------------------------------------

sub get_props
{
    local( $dir ) = @_;

    local( $props ) = 0;    # properties to return
    local( $arch ) = '';    # arch for this machine
    local( @tmp );
    local( @files );

    opendir( RT_DIR, $dir ) || die "Error: cannot open directory '$dir'\n";
    @files = readdir( RT_DIR );
    closedir( RT_DIR );

    # set .compile .ig_retval
    if( -e "$dir/$rt_compile" ) {
        $props = $props | $rt_test_props{ 'comp_only' };
    }
    if( -e "$dir/$rt_ig_retval" ) {
        $props = $props | $rt_test_props{ 'ig_retval' };
    }

    # set 'dontrun' for:
    #  - .dontrun
    #  - .only<arch> if were are not running on <arch>
    #  - .not<arch>  if were are running on <arch>
    if( -e "$dir/$rt_dontrun" ) {
        $props = $props | $rt_test_props{ 'dontrun' };
    } else {
        if( grep( /^\.not$rt_systemc_arch$/, @files ) > 0 ) {
            # found arch exclusion
            $props = $props | $rt_test_props{ 'dontrun' };
        }
        @tmp = grep( /^\.only/, @files );
        if( $#tmp >= 0 ) {       # found arch restrictions
            $props = $props | $rt_test_props{ 'dontrun' }
                unless ( grep( /^\.only$rt_systemc_arch$/, @tmp ) > 0 );
        }
    }

    # find directory type
    $dirtype = 'scr';
    @tmp = grep( /\.$rt_test_type{ 'scr' }$/, @files );
    $#tmp = -1;
    if( $#tmp < 0 ) {
        $dirtype = 'c';
        @tmp = grep( /\.$rt_test_type{ 'c' }$/, @files );
    }
    if( $#tmp < 0 ) {
        $dirtype = 'f';
        @tmp = grep( /\.$rt_test_type{ 'f' }$/, @files );
    }
    if( $#tmp < 0 ) {           # no include, so try single
        $dirtype = 's';
        @tmp = grep( /\.$rt_test_type{ 's' }$/, @files );
    }

    ( $props, $dirtype, @tmp );
}


# -----------------------------------------------------------------------------
#  SUB : add2testlist
#
#  - Find props for directory;
#  - add tests to %rt_testlist.
# -----------------------------------------------------------------------------

sub add2testlist
{
    # my( $testdir, $testprop, @tests ) = @_;
    local( $testdir ) = shift;
    local( $testprop ) = shift;
    local( @tests ) = @_;

    if( $rt_diag >=4 ) {
        &print_log( "DIAG: add2testlist: $testdir " . hex( $testprop ) . " " .
                   join( ' ', @tests ) . "\n" );
    }

    foreach $test ( @_ ) {
        $rt_testlist{ "$testdir $test" } = $testprop;
    }
}


# -----------------------------------------------------------------------------
#  SUB : get_children
#
#  Return all directories below current.
# -----------------------------------------------------------------------------

sub get_children
{
    local( $dir, $base ) = @_;

    local( @files );

    opendir( RT_DIR, "$dir/$base" ) ||
        die "Error: cannot open directory '$dir/$base'\n";
    @files = grep( ! /^\.\.?$/,
                   grep( ( -d "$dir/$base/$_" ) && ! ( -l "$dir/$base/$_" ),
                         readdir( RT_DIR ) ) );
    closedir( RT_DIR );

    grep( $_ = "$base/$_", @files );
}


# -----------------------------------------------------------------------------
#  SUB : find_it
#
#  - arg is test file or directory.
#  - returns '' on success.
#  - returns level of path where search failed:
#      o test root dir if first part of path fails.
#      o sub-directory(s) if first part of path is found but
#        either directories can't be found, or test doesn't
#        exist.
#  - sets properties for tests in each directory.
#  - adds found tests to %rt_testlist
# -----------------------------------------------------------------------------

sub find_it
{
    local( $testname ) = @_;

    local( @found ) = ();
    local( @searchdirs );        # root dirs in search
    local( @tempsearch );
    local( $tempdir );
    local( $toplevel );          # save level of path
    local( $temp );
    local( $testbase );          # path to test
    local( $dirtype );           # type of dir (single, include, csh)
    local( $dirprops );          # properties for dir (ie dontrun...)

    # remove trailing '/'
    $testname =~ s|/$||;

    # do levelwise search

    ( $toplevel ) = ( $testname =~ m|^([^/]+)| );
    ( $testbase = $testname ) =~ s|/[^/]+$||;
    $testbase = '' if $testbase eq $testname;

    &print_log( "\nDIAG: testname=$testname, toplevel=$toplevel, " .
               "testbase=$testbase\n" )
        if $rt_diag >= 1;

    # first try to find start of given path
    @tempsearch = ( '.' );
    while( $#found < 0 ) {
        @searchdirs = @tempsearch;
        &print_log( "\nDIAG: \$#searchdirs=$#searchdirs, " ) if $rt_diag >= 8;
        &print_log( "\$#tempsearch=$#tempsearch\n" ) if $rt_diag >= 8;
        @tempsearch = ();
        return $rt_tests_dir if $#searchdirs < 0;
        foreach $tempdir ( @searchdirs ) {
            opendir( RT_DIR, "$rt_tests_dir/$tempdir" );

            # found test directory or matching file
            my @dir_contents = grep( /^$toplevel/, readdir( RT_DIR ) );
            foreach $dir_entry ( @dir_contents ) {
                if( ( $dir_entry eq $toplevel ) || ( ! -d $dir_entry ) ) {
                    if( $tempdir =~ /^\.$/ ) {
                        push( @found, "" );
                    } else {
                        push( @found, "$tempdir/" );
                    }
                }
            }

            closedir( RT_DIR ) && next if $#found >= 0;
            rewinddir( RT_DIR );
            foreach $temp ( grep( ! /^\.\.?$/,
                                  grep( ( -d "$rt_tests_dir/$tempdir/$_" ) &&
                                        ! ( -l "$rt_tests_dir/$tempdir/$_" ),
                                        readdir( RT_DIR ) ) ) ) {
                if( $tempdir =~ /^\.$/ ) {
                    push( @tempsearch, "$temp" );
                } else {
                    push( @tempsearch, "$tempdir/$temp" );
                }
            }
            closedir( RT_DIR );
        }
    }

    &print_log( "DIAG: \$#found=$#found, found='" .
               join( ':', @found ) . "'\n" ) if $rt_diag >= 5;

    # create list of directories found to be used if
    #   file/dir can't be found
    local( @tmp ) = @found;
    # now toplevel is final part of name
    ( $toplevel ) = ( $testname =~ m|([^/]+)$| );
    local( $retval ) = join( ' ', grep( $_ = "$rt_tests_dir/$_", @tmp ) );
    while( $#found >= 0 ) {
        &print_log( "DIAG: \$#found=$#found, found='" .
                   join( ':', @found ) . "'\n" ) if $rt_diag >= 5;

        $temp = shift @found;

        &print_log( "DIAG: $rt_tests_dir/$temp$testbase\n" ) if $rt_diag >= 4;

        # don't waste time if path can't be found
        next if ! -d "$rt_tests_dir/$temp$testbase";

        # full path to single test
        ( $_ ) = ( $testname =~ /\.([a-z]{1,3})$/ );
        if( ( -f "$rt_tests_dir/$temp$testname" ) &&
            ( -f "$rt_tests_dir/$temp${testbase}/$toplevel" ) &&
            # test for invalid test extension
            ( ( $_ =~ /$rt_test_type{ 's' }/ ) ||
              ( $_ eq $rt_test_type{ 'f' } ) ||
              ( $_ eq $rt_test_type{ 'c' } ) ) ) {

            # get directory properties
            ( $dirprops, $dirtype, @tmp ) =
                &get_props( "$rt_tests_dir/$temp$testbase" );
            $dirprops = $dirprops | $rt_props;    # add global props

            ( $_ ) = ( $testname =~ m|/?([^/]+)$| );
            $testname =~ s|/?[^/]+$||;
            $temp =~ s|/$|| if $testname eq '';
            &add2testlist( "$temp$testname", $dirprops, $_ );
            $retval = '';
        }
        else {

            # full path to directory
            if( -d "$rt_tests_dir/$temp$testname" ) {
                &print_log( "DIAG: dir='$rt_tests_dir/$temp$testname'\n" )
                    if $rt_diag >= 4;

                # check if directory is execused
                ( $dirprops, $dirtype, @tmp ) =
                    &get_props( "$rt_tests_dir/$temp$testname" );
                next if( $dirprops & $rt_test_props{ 'dontrun' } ) > 0;

                # first look for children
                @tmp = &get_children( "$rt_tests_dir", "$temp$testname" );
                if( $#tmp >= 0 ) {
                    # we found children so update @found, add
                    #   $testname to $temp, and zero $testname
                    push( @found, @tmp );   # adding children
                    $temp .= $testname;
                    $testname = '';
                    $testbase = '';
                }

                # get directory properties
                ( $dirprops, $dirtype, @tmp ) =
                    &get_props( "$rt_tests_dir/$temp$testname" );
                @tmp = grep( -f "$rt_tests_dir/$temp${testname}/$_", @tmp );
                next if $#tmp < 0;  # no tests in dir
                next if( $dirprops & $rt_test_props{ 'dontrun' } ) > 0;
                $dirprops = $dirprops | $rt_props;    # add global props

                &add2testlist( "$temp$testname", $dirprops, @tmp );
                $retval = '';
            }

            # find matching files that begin with same name
            else {
                # get directory properties
                ( $dirprops, $dirtype, @tmp ) =
                    &get_props( "$rt_tests_dir/$temp${testbase}" );
                @tmp = grep( -f "$rt_tests_dir/$temp${testbase}/$_", @tmp );
                next if $#tmp < 0;  # no tests in dir
                next if( $dirprops & $rt_test_props{ 'dontrun' } ) > 0;
                $dirprops = $dirprops | $rt_props;    # add global props

                @tmp = grep( m|^$toplevel[^/]+$|, @tmp );
                if( $#tmp >= 0 ) {
                    $temp =~ s|/$|| if $testbase eq '';
                    &add2testlist( "$temp$testbase", $dirprops, @tmp );
                    $retval = '';
                }
            }
        }
    }

    return $retval;
}


# -----------------------------------------------------------------------------
#  SUB : get_testlist
#
#  - Arguments:
#    string of whitespace delimited file or directory names
#    string containing name of -f include file
#  - Puts all testnames in associative array (%rt_testlist) using the
#    testname as the key and putting attributes about the test in
#    the value.  Testname is space separated path and name:
#    "private/bugs bug21.f"
#  - Uses dot files to set attributes.
#  - Returns 1 for success, 0 for failure
# -----------------------------------------------------------------------------

sub get_testlist
{
    local( $namelist,              # list of names
           $include_names          # list of include filenames
           ) = @_;

    local( @namearray );              # array for names and filenames
    local( $listlen );                # number of names in namelist
    local( $temp );
    local( $err_file );
    local( $temp_fname );
    local( $testnames );              # tests found in search

    # process command line names
    foreach $temp ( split( / /, $namelist ) ) {
        next if $temp =~ /^\s*$/;
        $testnames = &find_it( $temp );    # returns '<paths>' on failure

        if( $testnames ne '' ) {
            # error because dir exists but has no tests
            foreach $err_file ( split( ' ', $testnames ) ) {
                if( -d "$err_file$temp" ) {
                    &print_log( "Error: test directory '$err_file$temp'\n\t" .
                               "doesn't contain any tests\n" );

                    # error because dir or tests don't exist
                } else {
                    &print_log( "Error: '$temp' not found in '$err_file'\n" );
                }
            }
            return 0;
        }
    }

    # process include files
    foreach $temp_fname ( split( /\s+/, $include_names ) ) {
        next if $temp_fname =~ /^\s*$/;
        if( ! ( -e $temp_fname ) ) {
            &print_log( "Error: '$temp_fname' does not exist\n" );
            return 0;
        }
        if( ! open( RT_INCFILE, $temp_fname ) ) {
            &print_log( "Error: '$temp_fname' cannot be opened for reading\n" );
            return 0;
        }
        while( <RT_INCFILE> ) {
            s/\n//;
            next if /^#/;
            foreach $temp ( split( /\s+/, $_ ) ) {
                next if $temp =~ /^\s*$/;
                $temp =~ s/\r//g;
                $testnames = &find_it( $temp );  # returns '<paths>' on failure
                if( $testnames ne '' ) {
                    # error because dir exists but has no tests
                    foreach $err_file ( split( ' ', $testnames ) ) {
                        if( -d "$err_file$temp" ) {
                            &print_log( "Error: test directory " .
                                       "'$err_file$temp'\n\t" .
                                       "doesn't contain any tests\n" );

                            # error because dir or tests don't exist
                        } else {
                            &print_log( "Error: '$temp' not found in " .
                                       "'$err_file'\n" );
                        }
                    }
                    return 0;
                }
            }
        }
        close RT_INCFILE;
    }
    1;
}


# -----------------------------------------------------------------------------
#  SUB : create_dir
#
#  Create the given directory (if needed), and go there.
# -----------------------------------------------------------------------------

sub create_dir
{
    use File::Path qw(make_path);
    local( $dir ) = @_;

    make_path( $dir, { mode => $rt_dir_permissions} );
    # go to directory $dir
    if( ! chdir( $dir ) ) {
        &print_log( "Error: cannot go to directory '$dir'\n" );
        # failed
        return 0;
    }

    # succeeded
    1;
}


# -----------------------------------------------------------------------------
#  SUB : setup_for_test
#
#  - cd to proper log directory
#  - create log directories as needed
#  - create symlink for source dir
#  - return last level of path to test
# -----------------------------------------------------------------------------

sub setup_for_test
{
    local( $currtestdir ) = @_;

    local( $dirparts );

    @dirparts = split( '/', $currtestdir );
    $linkdir = pop @dirparts;

    # create log path and cd to it
    &create_dir( "$rt_output_dir/$currtestdir" );

    if( $rt_systemc_arch =~ /^msvc/ ) {

        # the 'cl' compiler doesn't accept links
        local( @args );
        @args = ( "cp", "-pr", "$rt_tests_dir/$currtestdir", "." );
        system( @args ) == 0
            or die "system @args failed: $?";

    } else {

        eval 'symlink( "$rt_tests_dir/$currtestdir", "$linkdir" );';

        if( ! ( -e $linkdir ) ) {
            &print_log( "Error: unable to establish symbolic link " .
                        "'$rt_tests_dir/$currtestdir' to '$linkdir'\n" );
        }

    }

    # return last part of path to test
    $linkdir;
}


# -----------------------------------------------------------------------------
#  SUB : rt_system
#
#  - run system call with signal capture
#  - any call given through here should
#    redirect output (have meta chars)
# -----------------------------------------------------------------------------

sub rt_system
{
    local( $command ) = @_;

    local( $ret_code );
    local( $signal );

  FORK: {
      if( $rt_child_pid = fork ) {
          # wait for command to complete
          waitpid( $rt_child_pid, 0 );
          undef $rt_child_pid;
          $ret_code = $? >> 8;
          $signal = $? & 255;
          return ( $ret_code, $signal );

      } elsif( defined $rt_child_pid ) {
          # execute command
          # (add exec so process is command, not sh)
          exec( "exec $command" ) || exit -1;

      } elsif( $! =~ /No more process/ ) {
          sleep 5;
          redo FORK;
      } else {
          return 1;
      }
  }
}


# -----------------------------------------------------------------------------
#  SUB : file_size
#
#  - check the size of the log file
#  - return the size of the file
# -----------------------------------------------------------------------------

sub file_size
{
    local( $file ) = @_;

    local( $size ) = -s( $file );
    $size;
}


# -----------------------------------------------------------------------------
#  SUB : rt_timed_system
#
#  ******PLEASE READ COMMENTS VERY CAREFULLY BEFORE MAKING CHANGES*******
#  - run system call with timeout and checking size of output file
# -----------------------------------------------------------------------------

sub rt_timed_system
{
    local( $command, $timeout, $file ) = @_;

    local( $size );
    local( $ret_code );
    local( $signal );

  FORK: {
      # fork here to monitor the cpu time for the simulator
      if( $rt_child_pid = fork ) {
          alarm( $timeout * 60 );
          # do another fork here to monitor the size of the log file
          if( $rt_size_pid = fork ) {
              # parent process
              # does nothing
          } elsif( defined $rt_size_pid ) {
              # child process
              # if filesize > maxfile size terminate
              while( 1 ) {
                  sleep( 5 );
                  $size = &file_size( $file );
                  if( $size > $rt_max_file_size ) {
                      kill 'TERM', $rt_child_pid;
                      exit 0;
                  }
              }
          }
          # wait for termination of either child procees
          # note that this is ABSO necessary else there will be defunct
          #   processes floating around
          # note that this is the process whose exit code we are interested
          #   in and not the size process
          waitpid( $rt_child_pid, 0 );
          $ret_code = ($? >> 8);
          $signal = ($? & 255);
          # now kill the size process and wait for it to terminate
          #   else there will be defunct processes floating around
          kill 'TERM', $rt_size_pid;
          waitpid( $rt_size_pid, 0 );
          alarm 0;
          undef $rt_size_pid;
          undef $rt_child_pid;
          return( $ret_code, $signal );

      } elsif( defined $rt_child_pid ) {
          # execute command
          # (add exec so process is command, not sh)
          exec( "exec $command" ) || exit -1;
      } elsif( $! =~ /No more process/ ) {
          sleep 5;
          redo FORK;
      } else {
          return 1;
      }
  }
}


# -----------------------------------------------------------------------------
#  SUB : compile_files
#
#  Compile set of files.
# -----------------------------------------------------------------------------

sub compile_files
{
    local( $filename, $testname, $command ) = @_;

    local( $temp );
    local( $exit_code );
    local( $signal );
    local( $newcommand );
    local( $ofile );
    local( $tmp );
    local( $file );
    local( $ofilestring );

    open( FILE, "<$filename" ) ||
        &print_log( "Error: cannot open file '$filename'\n" );

    $files = "";
    $ofilestring = "";
    $first_time = 1;

    &print_log( "Compiling\n" );

    while( <FILE> ) {
        $temp = $_;                                # <link_dir>/<basename>.cpp

        $temp =~ s|\s+$||;
        $file = `basename $temp .cpp`;                # file = <basename>
        $file =~ s|\s+$||;

        $newcommand = $command;
        if( $rt_systemc_arch =~ /^msvc/ ) {
            $ofilestring .= " $file.obj";
           $newcommand  .= " -Fo$file.obj $temp";
        } else {
            $ofilestring .= " $file.o";
            $newcommand  .= " -o $file.o $temp";
        }

        # if first time create the file, else append to it
        if( $first_time ) {
            $first_time = 0;
            $newcommand .= " 1> $testname.log 2>&1";
        } else {
            $newcommand .= " 1>> $testname.log 2>&1";
        }

        &print_log( "  $file\n" ) unless $rt_verbose;
        &print_log( "  $newcommand\n" ) if $rt_verbose;

        ( $exit_code, $signal ) = &rt_timed_system( $newcommand, $rt_timeout,
                                                    "$testname.log" );

        if( $exit_code != 0 || $signal != 0 ) {
            return ( $exit_code, $signal, $temp, $ofilestring );
        }
        next;
    }
    close FILE;

    return ( 0, 0, 0, $ofilestring );
}


# -----------------------------------------------------------------------------
#  SUB : strip_tracelog
#
#  Routine that strips first 7 lines from .vcd and .awif log files,
#  which contain SystemC version and date information.
# -----------------------------------------------------------------------------

sub strip_tracelog
{
    local( $log_file, $stripped_file ) = @_;

    # check existence of log file
    if( ! -e $log_file ) {
        &print_log( "Error: cannot find log file '$log_file'\n" );
        return 'exst_stp_input';
    }

    local( $dir );

    # put output in file $stripped_file
    ( $dir = $stripped_file ) =~ s|/[^/]+$||;
    &create_dir( $dir );

    $command = "`sed '1,7d' < $log_file > $stripped_file`";

    ( $exit_code, $signal ) = &rt_system( $command );

    # chmod( $rt_file_permissions, "$stripped_file" );

    0;
};


# -----------------------------------------------------------------------------
#  SUB : check_sim_in_log
#
#  Read as much of the log file as needed to find simulator pattern.
# -----------------------------------------------------------------------------

sub check_sim_in_log
{
    for( @strip_logfile ) {
        /$rt_sim_pat/o && return 0;
    }

    &print_log( "Error: failed to find simulator pattern!\n" );
    return 1;
}


# -----------------------------------------------------------------------------
#  SUB : strip_tail
#
#  Remove tail banner up to beginning of compile messages.
# -----------------------------------------------------------------------------

sub strip_tail
{
    local( $eval_cmds );

    # use eval loop so regex compiles once
    $eval_cmds = <<"EVAL";
    local( \$tmp ) = $#strip_logfile;
    while( \$tmp >= 0 ) {
        last if \$strip_logfile[\$tmp] =~ /$rt_strip_tail_pat/;
        \$tmp --;
    }
    \$#strip_logfile = \$tmp - 1 unless \$tmp < 0;
EVAL
    eval $eval_cmds;
}


# -----------------------------------------------------------------------------
#  SUB : strip_header
#
#  Remove header banner up to beginning of compile messages.
# -----------------------------------------------------------------------------

sub strip_header
{
    local( $eval_cmds );

    # use eval loop so regex compiles once
    $eval_cmds = <<"EVAL";
    while( \$#strip_logfile >= 0 ) {
          last if \$strip_logfile[0] =~ /$rt_strip_head_pat/;
          shift \@strip_logfile;
      }
EVAL
    eval $eval_cmds;
}


# -----------------------------------------------------------------------------
#  SUB : scl_strip
# -----------------------------------------------------------------------------

sub scl_strip
{
    while( $#strip_logfile >= 0 ) {
        ( $_ = shift( @strip_logfile ) ) =~ s|$rt_systemc_home|\$SYSTEMC_HOME|;
        # remove file and line number information (always changes!)
        s|^(In file: ).*/src/sysc/.*$|$1<removed by verify\.pl>|;
        s|^(In file: ).*/include/sysc/.*$|$1<removed by verify\.pl>|;
        s|^(In file: ).*:.*$|$1<removed by verify\.pl>|;
        # remove ^M in msvc generated output files
        s|\r||;
        # additional filter
        if( $rt_add_filter ne '' ) {
            s|$rt_add_filter||;
        }
        $strip_output_log .= $_;
    }
}


# -----------------------------------------------------------------------------
#  SUB : strip_log
#
#  Strip simulator specific info from log file;
#  Filename passed to striplog is expected
#    to already be verified (full rooted
#    pathname must be given).
#
# -------- Significant Modifications:  Dec 27, 1996, JLMurdock-------------
# Arguments: (1) $logfilename must be full rooted pathname for file
#                     to be stripped.
#
#            (2) $outfilename can be either a full rooted pathname of
#                     where to put the output,  or it can be nothing.
#                     If no second argument is given, then output goes
#                     to stdout.
#
# Return values: one of {0, exst_stp_input, copen_stp_input, bad_sim_type,
#                        copen_stp_output, copen_stdout}
#
#                           0:  means everything went OK.
#              exst_stp_input:  means the input file for stipping, i.e.
#                               $logfilename, doesn't exist.
#             copen_stp_input:  means "Can't open the input file,
#                               $logfilename, for stripping."
#            copen_stp_output:  means "Can't open the file, $outfilename, to
#                               recieve the output of the strip."
#                bad_sim_type:  means the type of a recognized simulator,
#                               (e.g. Vivace, OVIsim, VerilogXL) could not
#                               be found in $logfilename.  This can also
#                               mean that the simulation failed horribly
#                               (e.g. a seg fault in Vivace) and the
#                               simulator's name never made it into the log.
#                               Stripping cannot be done unless the name of
#                               the simulator (i.e. sim_type) is known.
#                copen_stdout:  means that the striplog subroutine attempted
#                               to write to STDOUT, but was unsuccessful.
#                               (striplog writes to STDOUT when no
#                               $outfilename is given.)
# -----------------------------------------------------------------------------

sub strip_log
{
    local( $logfilename, $outfilename ) = @_;

    local( $routine );
    local( $path );

    @strip_logfile = ();        # use these as globals within
    $strip_output_log = '';        # the strip routines...

    if( ! ( -e $logfilename ) ) {
        &print_log( "Error: file to be stripped, '$logfilename', " .
                   "does not exist\n" );
        return 'exst_stp_input';
    }

    if( ! open( STRIP_IN, "$logfilename" ) ) {
        &print_log( "Error: cannot open log file to be stripped " .
                   "'$logfilename'\n" );
        return 'copen_stp_input';
    }

    @strip_logfile = <STRIP_IN>;

    # if segfault while simulating
    if( &check_sim_in_log ) {
        return 'bad_sim_type';
    }

    &strip_tail;

    &strip_header;

    $routine = "&scl_strip;";
    eval $routine; # Also apparently using globals.

    if( $outfilename eq '' ) { # stripped log goes to stdout
        if( ! open( STRIP_OUT, ">-" ) ) {
            &print_log( "Error: cannot dup stdout\n" );
            return 'copen_stdout';
        }
    } else { # put output in file $outfilename
        ( $path = $outfilename ) =~ s|/[^/]+$||;
        &create_dir( $path );
        if( ! open( STRIP_OUT, ">$outfilename" ) ) {
            &print_log( "Error: cannot open stripped output file " .
                       "'$outfilename'\n" );
            return 'copen_stp_output';
        }
    }
    # chmod( $rt_file_permissions, "$outfilename" );
    print STRIP_OUT $strip_output_log;
    close STRIP_OUT;

    0; # Return 0 if everything went OK.
}


# -----------------------------------------------------------------------------
#  SUB : diff_log
#
#  Diff the log file and the golden reference file.
# -----------------------------------------------------------------------------

sub diff_log
{
    local( $logfile ) = @_;

    # strip log file
    local( $striplogfile ) = $logfile . ".stripped";
    local( $new ) = "$rt_output_dir/$striplogfile";
    local( $result );
    # use strip_tracelog() for trace tests, striplog() for other tests
    if( $logfile =~ /vcd_trace/ || $logfile =~ /wif_trace/ ) {
        $result =  &strip_tracelog( "$rt_output_dir/$logfile", $new );
    } else {
        $result =  &strip_log( "$rt_output_dir/$logfile", $new );
    }
    if( $result ) {
        return "o_$result";
    }

    # check for golden log file
    local( $golden_logfile );
    # first: platform dependent file
    ( $golden_logfile = $logfile ) =~
        s|^(.*)/([^/]+)$|$1/golden/$2\.$rt_systemc_arch|;
    if( ! -e "$rt_tests_dir/$golden_logfile" ) {
        # second: platform independent file
        ( $golden_logfile = $logfile ) =~ s|^(.*)/([^/]+)$|$1/golden/$2|;
        if( ! -e "$rt_tests_dir/$golden_logfile" ) {
            &print_log( "Error: " .
                       "cannot find golden log file '$golden_logfile'\n" );
            return 'g_exst_stp_input';
        }
    }
    local( $ref ) = "$rt_tests_dir/$golden_logfile";

    # do diff
    if( ! open( DIFFCMD_OUT, "diff -a -w $new $ref |" ) ) {
        &print_log( "Error: diff on '$new' and '$ref' failed\n" );
        return 'diff_prog_fail';
    }
    local( @diff_output );
    @diff_output = <DIFFCMD_OUT>;
    close DIFFCMD_OUT;

    # passed?
    if( $#diff_output < 0 ) {
        return '';
    }

#    @diff_output = grep( /^[<>] /, @diff_output );
#    unshift( @diff_output, "< $rt_output_dir/$striplogfile\n" );
#    unshift( @diff_output, "> $rt_tests_dir/$golden_logfile\n" );
    join( '', @diff_output );
}


# -----------------------------------------------------------------------------
#  SUB : do_diff
#
#  Does strip and diff of log files.
# -----------------------------------------------------------------------------

sub do_diff
{
    local( $file ) = @_;

    local( $diff_outfile );
    local( $path );

    ( $diff_outfile = "$rt_output_dir/$file" ) =~ s|\.\w+$|.diff|;

    ( $path = $diff_outfile ) =~ s|/[^/]+$||;
    &create_dir( $path );

    # For trace tests diff .vcd or .awif files.
    # For all other tests diff .log files. -- Amit 3/8/99

    $file =~ tr| |/|; # combine path & name

    if( $file =~ /vcd_trace/ ) {
        ( $logfile = $file ) =~ s/\.\w+$/.vcd/; # change test to .vcd
    } elsif( $file =~ /wif_trace/ ) {
        ( $logfile = $file ) =~ s/\.\w+$/.awif/; # change test to .vcd
    } else {
        ( $logfile = $file ) =~ s/\.\w+$/.log/; # change test to log
    }

    if( ! ( -e "$rt_output_dir/$logfile" ) ) {
        &print_log( "Error: cannot find logfile '$logfile'\n" );
        return 'missolog';
    }

    $diff_result = &diff_log( $logfile );

    if( $rt_error_code{ $diff_result } ) {
        &print_log( "FAILED\n" );
        return $diff_result;
    } elsif( $diff_result ) {
        if( ! open( DIFF_OUT, ">$diff_outfile" ) ) {
            &print_log( "Error: cannot open output file '$diff_outfile'\n" );
            return 'difffile';
        }
        # chmod( $rt_file_permissions, "$diff_outfile" );
        print DIFF_OUT '-' x 79, "\n",
            "  diff failed on '$logfile'\n",
            '-' x 79, "\n";
        print DIFF_OUT $diff_result;
        close DIFF_OUT;
        &print_log( "FAILED\n" );
        return 'fdiff';
    } else { # diff produced nothing
        &print_log( "PASSED\n" );
        return 'pass';
    }
}


# -----------------------------------------------------------------------------
#  SUB : run_test
#
#  - first arg is testname without path
#  - second arg is path to test starting from testdir
# -----------------------------------------------------------------------------

sub run_test
{
    local( $currtestdir,       # path to tests
           $testname
           ) = @_;

    local( $props ) = $rt_testlist{ "$currtestdir $testname" };

    local( $type );             # test type (t=pli, s=single, f=include, c=csh)
    local( $temp );
    local( $command );          # command given to system call
    local( $linkdir );          # final dir in path to test
    local( $opts );             # command line options passed to compiler
    local( $basename );         # basename for test
    local( $test_set );         # set of tests (first part of path)
    local( $exit_code );        # exit code returned by system calls
    local( $signal );           # signal on which system call terminated
    local( $tmp );
    local( $diff_result );      # value returned by calling do_diff, which
                                # lives in rt_comm.pl.  It is a value from
                                # the array %rt_error_code.
    local( $comp_opts );        # options to compiler (vvc)
    local( $sym_opts );         # options to simulator (sym)
    local( $err_file );
    local( $scl_include );
    local( @test_set_includes ) = ( '.' );

    &print_log( "\n" );


    # ***** Basic Setup *****

    # determine test type
    $testname =~ s/\.([a-z]{1,3})$//;
    $type = $1;

    # making a global to keep track of progress
    $rt_current_test = "$currtestdir/$testname.$type";

    # determine the test set
    ( $test_set = $currtestdir ) =~ s|^(\./)*([^/]+)/.*|\2|;
    $test_set = undef if ( $test_set eq '.' );

    # cd and create symlink
    $linkdir = &setup_for_test( $currtestdir );

    # add test directory to includes
    push ( @test_set_includes, $linkdir );
    # add local include dir, if exists
    push ( @test_set_includes, "$rt_systemc_test/include/$test_set" )
        if ( defined $test_set && -d "$rt_systemc_test/include/$test_set" );
    # add global include dirs
    push ( @test_set_includes, @rt_includes );

    # extract base name
    $basename = "$linkdir/$testname";

    # read options file
    $opts = "$rt_opts";

    $command = "";

    &print_log( "---------------------------------------" .
               "----------------------------------------\n" );
    local( $num_tests ) = scalar keys %rt_testlist;
    &print_log( " TEST : $rt_current_test  ($rt_test_number/$num_tests)\n" );
    &print_log( "---------------------------------------" .
               "----------------------------------------\n" );

    local( $extra_flags ) = "";
    if( $rt_props & $rt_test_props{ 'debug' } ) {
        $rt_msvc_runtime = $rt_msvc_runtime_dbg; # prefer debug runtime
        $extra_flags .= " $rt_debug_flag";
    }
    if( $rt_props & $rt_test_props{ 'optimize' } ) {
        $extra_flags .= " $rt_optimize_flag";
    }

    # add MSVC runtime (need to be done here, as we need to consider debug flag)
    $extra_flags .= " $rt_msvc_runtime" if $rt_systemc_arch =~ /^msvc/;

    local( $pure ) = "";
    local( $pure_log );
    ( $pure_log = $rt_prodname ) =~ s|.exe|.purelog|;
    if( $rt_props & $rt_test_props{ 'purecov' } ) {
        $pure = "purecov -log-file=$pure_log";
    } elsif( $rt_props & $rt_test_props{ 'purify' } ) {
        $pure = "purify -windows=no -log-file=$pure_log";
    } elsif( $rt_props & $rt_test_props{ 'quantify' } ) {
        $pure = "quantify -windows=no -log-file=$pure_log";
    }

    # ***** COMPILE *****

    #
    # create compile command line for single .cpp file
    #
    if( $type =~ /$rt_test_type{'s'}/ ) {

        # compile command
        $command  = "$rt_cc $rt_ccflags $extra_flags ";
        $command .= join( '', map { "-D $_ " } @rt_defines );
        $command .= join( '', map { "-I $_ " } @test_set_includes );
        $command .= "-c ";

        # add user provided options to command
        $command .= " $opts";

        # add C++ file to command
        $command .= " ./$basename.$type";

        # add logfile to command
        $command .= " 1> $testname.log  2>&1";

        if( $rt_systemc_arch =~ /^msvc/ ) {
            # translate Cygwin path to Windows path
            $command =~ s!/(cygdrive|drives)/(.)/!$2:/!g;
        }

        &print_log( "Compiling\n" );
        &print_log( "  $command\n" ) if $rt_verbose;

        # run command
            ( $exit_code, $signal ) = &rt_system( $command );

        # error checking
        if( $exit_code != 0 || $signal != 0 ) {
            &print_log( "FAILED\n" );
            return $rt_error_code{'fcomp'};
        }

        # stop here if compile only
        if( ( $props & $rt_test_props{'comp_only'} ) > 0 ) {
            &print_log( "PASSED\n" );
            return $rt_error_code{'pass'};
        }

        # link command
        $command  = "$pure $rt_ld $rt_ldflags $extra_flags ";
        if( $rt_props & $rt_test_props{ 'debug' } ) {
            $command .= "$rt_debug_ldflags ";
        }

        if( $rt_systemc_arch =~ /^msvc/ ) {
            $command .= "-out:$rt_prodname ";
            $command .= "$testname.obj ";
            $command .= join( '', map { "-LIBPATH:$_ " } @rt_ldpaths );
            $command .= join( '', map { "$_.lib " } @rt_ldlibs );

        } else {
            $command .= "-o $rt_prodname ";
            $command .= "$testname.o ";
            $command .= "-L. ";
            if($rt_systemc_arch =~ /^mingw/ ) {
                $command .= join('', map { "-L$_ " } @rt_ldpaths);
            }else{
	        $command .= join('', map { "-L$_ $rt_ldrpath$_ " } @rt_ldpaths);
            }
            $command .= join('', map { "-l$_ " } @rt_ldlibs);
        }

        if( $rt_systemc_arch !~ /^msvc/ ) {
            # add user provided options to command
            $command .= " $opts";
        }

        # add logfile to command
        $command .= " 1>> $testname.log  2>&1";

        if( $rt_systemc_arch =~ /^msvc/ ) {
            # translate Cygwin path to Windows path
            $command =~ s!/(cygdrive|drives)/(.)/!$2:/!g;
        }

        &print_log( "Linking\n" );
        &print_log( "  $command\n" ) if $rt_verbose;
    }

    #
    # create compile command line for command file with .f extension
    #
    if( $type =~ /$rt_test_type{'f'}/ ) {

        # compile command
        $command  = "$rt_cc $rt_ccflags $extra_flags ";
        $command .= join( '', map { "-D $_ " } @rt_defines );
        $command .= join( '', map { "-I $_ " } @test_set_includes );
        $command .= "-c ";

        # add user provided options to command
        $command .= " $opts";

        if( $rt_systemc_arch =~ /^msvc/ ) {
            # translate Cygwin path to Windows path
            $command =~ s!/(cygdrive|drives)/(.)/!$2:/!g;
        }

        # call compile_files to execute command for each C++ file
        ( $exit_code, $signal, $err_filename, $ofiles ) =
            &compile_files( "./$basename.$type", $testname, $command );

        # error checking on compile_files
        if( $exit_code != 0 || $signal != 0 ) {
            &print_log( "FAILED\n" );
            return $rt_error_code{'fcomp'};
        }

        # stop here if compile only
        if( ( $props & $rt_test_props{'comp_only'} ) > 0 ) {
            &print_log( "PASSED\n" );
            return $rt_error_code{'pass'};
        }

        # link command
        $command  = "$pure $rt_ld $rt_ldflags $extra_flags ";
        if( $rt_props & $rt_test_props{ 'debug' } ) {
            $command .= "$rt_debug_ldflags ";
        }

        if( $rt_systemc_arch =~ /^msvc/ ) {
            $command .= "-out:$rt_prodname ";
            $command .= "$ofiles ";
            $command .= join('', map { "-LIBPATH:$_ " } @rt_ldpaths );
            $command .= join('', map { "$_.lib " } @rt_ldlibs );

        } else {
            $command .= "-o $rt_prodname ";
            $command .= "$ofiles ";
            if($rt_systemc_arch =~ /^mingw/ ) {
                $command .= join('', map { "-L$_ " } @rt_ldpaths);
            }else{
	        $command .= join('', map { "-L$_ $rt_ldrpath$_ " } @rt_ldpaths);
            }
            $command .= join('', map { "-l$_ " } @rt_ldlibs);
        }

        if( $rt_systemc_arch !~ /^msvc/ ) {
            # add user provided options to command
            $command .= " $opts";
        }

        # add logfile to command
        $command .= " 1>> $testname.log  2>&1";

        if( $rt_systemc_arch =~ /^msvc/ ) {
            # translate Cygwin path to Windows path
            $command =~ s!/(cygdrive|drives)/(.)/!$2:/!g;
        }

        &print_log( "Linking\n" );
        &print_log( "  $command\n" ) if $rt_verbose;
    }

    #
    # create compile command line for Makefile with .mk extension
    #
    if( $type =~ /$rt_test_type{'c'}/ ) {

        $command = "make -f ./$basename.$type ";
        $command .= "CC=\"$rt_cc\" CCFLAGS=\"$rt_ccflags\" ";
        $command .= "LDFLAGS=\"$rt_ldflags\" SYSTEMC_HOME=$rt_systemc_home ";
        $command .= "SYSTEMC_ARCH=$rt_systemc_arch";

        # add user provided options to command
        $command .= " $opts";

        # add logfile to command
        $command .= " 1> $testname.log  2>&1";

        # stop here if compile only (???)
        if( $props & $rt_test_props{'comp_only'} > 0 ) {
            return $rt_error_code{'skip'};
        }

        &print_log( "Making\n" );
        &print_log( "  $command\n" ) if $rt_verbose;
    }

    # run command
    ( $exit_code, $signal ) = &rt_system( $command );


    # ***** COMPILE ERROR CHECKING *****

    if( $exit_code != 0 || $signal != 0 ) {
        &print_log( "FAILED\n" );
        return $rt_error_code{'fvvc'};
    }


    # ***** END ERROR CHECKING *****

    # stop here if compile only
    if( ( $props & $rt_test_props{'comp_only'} ) > 0 ) {
        &print_log( "PASSED\n" );
        return $rt_error_code{'pass'};
    }


    # ***** SIMULATE *****

    # run simulation
    $command = "$rt_systemc_run_tool";
    $command .= " ./$rt_prodname";
    $command .= " $sym_opts";

    # add logfile
    $command .= " 1>> $testname.log  2>&1";

    &print_log( "Running\n" );
    &print_log( "  $command\n" ) if $rt_verbose;

    # time tests, before
    local( @before );
    if( $rt_time_tests ) {
        @before = times;
    }

    # running simulation without timeout.
    ( $exit_code, $signal ) = &rt_system( $command );
    if( $signal != 0 ) {
        &print_log( "FAILED\n" );
        return $rt_error_code{'fsym'};
    }

    # time tests, after
    if( $rt_time_tests ) {
        local( @after ) = times;
        &print_log( "  " . int( $after[2] - $before[2] ) . " s\n" );
    }

    $command = "echo End of SystemC Simulation";
    $command .= " 1>> $testname.log  2>&1";
    ( $exit_code, $signal ) = &rt_system( $command );

    # chmod( $rt_file_permissions,
    #           "$rt_output_dir/$currtestdir/$testname.log" ); # (???)

    # ***** DIFF LOGS *****

    # do diffing of the logs
    &print_log( "Comparing\n" );

    $diff_result = &do_diff( "$currtestdir/$testname.$type" );
    return $rt_error_code{ $diff_result };
}


# -----------------------------------------------------------------------------
#  SUB : clean_up
#
#  Remove the current test directory, including any files.
# -----------------------------------------------------------------------------

sub clean_up
{
    local( $dir );
    ( $dir = $rt_current_test ) =~ s|/[^/]+$||;
    local( $full_dir ) = "$rt_output_dir/$dir";

    opendir( RT_DIR, $full_dir ) || return 0;
    local( @files );
    @files = readdir( RT_DIR );
    closedir( RT_DIR );

    local( $f );
    foreach $f ( @files ) {
        if( -d "$full_dir/$f" && $f !~ /^\.\.?$/ ) {
            local( @args );
            @args = ( "rm", "-rf", "$full_dir/$f" );
            system( @args );
        }
        if( $f !~ /^\.\.?$/ &&
            $f !~ /.pcv$/   &&
            $f !~ /.qv$/    &&
            $f !~ /.purelog$/ ) {
            unlink "$full_dir/$f" || return 0;
        }
    }

    chdir( $rt_output_dir );
    while( rmdir( $full_dir ) ) {
        $full_dir =~ s|/[^/]+$|| ;
    }

    1;
}

sub test_dirs {
    my $t;
    my @tests;
    foreach $t ( sort( keys %rt_testlist ) ) {
        my $dir = (split(/ /, $t))[0];
        push(@tests, File::Spec->canonpath($dir));
    }

    @tests;
}

sub gen_deps {
    use Data::Dumper;

    my @tests = @_;
    my %deps;
    my $t;
    foreach $t (@tests) {
        my @parts = File::Spec->splitdir($t);
        for(my $n = 1; $n < scalar @parts; $n = $n + 1){
            my $base = File::Spec->catdir(@parts[0..$n - 1]);
            my $dep =  File::Spec->catdir(($base, $parts[$n]));
            $deps{$base}{$dep} = 0;
        }
    }

    %deps;
}

sub write_base_rules {
    my %deps = @_;
    my @bases;
    my $b;
    my $verify = File::Spec->catdir($rt_systemc_test, "scripts", "verify.pl");

    foreach $b (keys %deps) {
        if (File::Spec->splitdir($b) == 1) {
            push(@bases, $b);
        }
    }

    print <<"EOT";
test: clean
	\@\$(MAKE) all

all: @bases

	touch pass.log fail.log
	echo -n pass: > result.log
	wc -l < pass.log >> result.log
	echo -n fail: >> result.log
	wc -l < fail.log >> result.log
	cat result.log

clean:
	rm -rf result.log pass.log fail.log @bases

	touch pass.log fail.log

.PHONY: clean
.PHONY: all
.PHONY: test

%.log:
	$verify $rt_mk_opts \"\$*\" && echo \"\$*\" >> pass.log || echo \"\$*\" >> fail.log
EOT
}

sub write_deps {
    my %deps = @_;
    my $base;
    foreach $base (keys %deps) {
        my @depstr = keys %{ $deps{$base} };
        print ".PHONY:\n";
        print "$base: @depstr\n\n";
    }
}

sub write_targets {
    my @tests = @_;
    my $t;
    foreach $t (@tests) {
        print ".PHONY: $t\n$t: $t.log\n\n";
    }
}

sub gen_makefile {
    my @tests = test_dirs();
    my %deps = gen_deps(@tests);
    write_base_rules(%deps);
    write_deps(%deps);
    write_targets(@tests);
}

# -----------------------------------------------------------------------------
#  SUB : main
#
#  The main routine.
# -----------------------------------------------------------------------------

sub main
{
    &init_globals;

    # parse the command line arguments
    local( $tests );
    local( $files );
    ( $tests, $files ) = &parse_args( @ARGV );

    &prepare_environment;

    &get_testlist( $tests, $files ) || exit 1;
 
    if( $rt_makefile ) {
        gen_makefile();
        exit 0;
    }

    &print_intro;

    my $exit_code = 0;
    local( $t );
    $rt_test_number = 0;
    foreach $t ( sort( keys %rt_testlist ) ) {
        $rt_test_number ++;
        $error_code = &run_test( split( ' ', $t ) );
        $t =~ s| |/|;
        if( $error_code eq $rt_error_code{ 'pass' } ) {
            push( @rt_pass, $t );
            &clean_up if( $rt_cleanup );
        } else {
            push( @rt_fail, "$error_code : $t" );
            $exit_code ++;
        }
        &print_log( "(", $#rt_pass + 1, ":", $#rt_fail + 1, ")\n" );
    }

    &compile_results;

    exit $exit_code;
}


# Taf!