# Makefile.in --
#
#	This file is a Makefile for the Thread Tcl Extension.
#
#--------------------------------------------------------------------
# This Makefile.in is based on the Tcl Extension Architecture (TEA)
# v2002 spec.  See the sampleextension module for a fully commented
# version of the configure.in and makefiles to build your own extension.
#    http://tcl.sourceforge.net/  'sampleextension' cvs module
#    http://www.tcl.tk/           Tcl Developer Exchange
#--------------------------------------------------------------------
#
#	This is based on the Sample TEA Extension.  If it has the name
#	"Makefile.in" then it is a template for a Makefile;  to generate the
#	actual Makefile, run "./configure", which is a configuration script
#	generated by the "autoconf" program (constructs like "@foo@" will get
#	replaced in the actual Makefile.
#
# Copyright (c) 1999 Scriptics Corporation.
# Copyright (c) 2002 ActiveState Corporation.
# Copyright (c) 2002 by Zoran Vasiljevic.
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
#
# RCS: @(#) $Id: Makefile.in,v 1.18 2002/12/14 14:27:50 vasiljevic Exp $

#========================================================================
# Enumerate the names of the source files included in this package.
# This will be used when a dist target is added to the Makefile.
#========================================================================

thread_SOURCES	= threadCmd.c threadSvCmd.c threadSpCmd.c \
                  threadSvListCmd.c threadPoolCmd.c

#========================================================================
# Magic macro to identify the object files
#========================================================================

thread_OBJECTS	= $(thread_SOURCES:.c=.@OBJEXT@)
thread_LIB_FILE	= @thread_LIB_FILE@

#========================================================================
# This is a list of header files to be installed
#========================================================================

GENERIC_HDRS	= $(srcdir)/generic/tclThread.h

#========================================================================
# Nothing of the variables below this line need to be changed.  Please
# check the TARGETS section below to make sure the make targets are
# correct.
#========================================================================

AOL_DIR	=  @AOL_DIR@

#========================================================================
# Change the name of the variable "thread_LIB_FILE" to match the one
# used in the configure script.  This is the parameterized name of the
# library that we are building.
#========================================================================

lib_BINARIES	= $($(PACKAGE)_LIB_FILE)
BINARIES	= $(lib_BINARIES)

SHELL		= @SHELL@

srcdir		= @srcdir@
prefix		= @prefix@
exec_prefix	= @exec_prefix@

bindir		= @bindir@
libdir		= @libdir@
datadir		= @datadir@
mandir		= @mandir@
includedir	= @includedir@

DESTDIR		=

PKG_DIR		= $(PACKAGE)$(VERSION)
pkgdatadir	= $(datadir)/$(PKG_DIR)
pkglibdir	= $(libdir)/$(PKG_DIR)
pkgincludedir	= $(includedir)/$(PKG_DIR)

top_builddir	= .

INSTALL		= @INSTALL@
INSTALL_PROGRAM	= @INSTALL_PROGRAM@
INSTALL_DATA	= @INSTALL_DATA@
INSTALL_SCRIPT	= @INSTALL_SCRIPT@

PACKAGE		= @PACKAGE@
VERSION		= @VERSION@
THREAD_VERSION	= @VERSION@
THREAD_VERSION_SUBSET83 = @THREAD_VERSION_SUBSET83@
CC		= @CC@
CFLAGS_DEBUG	= @CFLAGS_DEBUG@
CFLAGS_DEFAULT	= @CFLAGS_DEFAULT@
CFLAGS_OPTIMIZE	= @CFLAGS_OPTIMIZE@
CLEANFILES	= @CLEANFILES@
EXEEXT		= @EXEEXT@
LDFLAGS_DEBUG	= @LDFLAGS_DEBUG@
LDFLAGS_DEFAULT	= @LDFLAGS_DEFAULT@
LDFLAGS_OPTIMIZE = @LDFLAGS_OPTIMIZE@
MAKE_LIB	= @MAKE_LIB@
MAKE_SHARED_LIB	= @MAKE_SHARED_LIB@
MAKE_STATIC_LIB	= @MAKE_STATIC_LIB@
OBJEXT		= @OBJEXT@
RANLIB		= @RANLIB@
SHLIB_CFLAGS	= @SHLIB_CFLAGS@
SHLIB_LD	= @SHLIB_LD@
SHLIB_LDFLAGS	= @SHLIB_LDFLAGS@
SHLIB_LD_LIBS	= @SHLIB_LD_LIBS@
STLIB_LD	= @STLIB_LD@
TCL_DEFS	= @TCL_DEFS@
TCL_SRC_DIR	= @TCL_SRC_DIR@
TCL_BIN_DIR	= @TCL_BIN_DIR@
# Not used, but retained for reference of what libs Tcl required
TCL_LIBS	= @TCL_LIBS@

#========================================================================
# TCLLIBPATH seeds the auto_path in Tcl's init.tcl so we can test our
# package without installing.  The other environment variables allow us
# to test against an uninstalled Tcl.  Add special env vars that you
# require for testing here (like TCLX_LIBRARY).
#========================================================================

EXTRA_PATH	= $(top_builddir):$(TCL_BIN_DIR)
TCLSH_ENV	= TCL_LIBRARY=`@CYGPATH@ $(TCL_SRC_DIR)/library` \
		  LD_LIBRARY_PATH="$(EXTRA_PATH):$(LD_LIBRARY_PATH)" \
		  LIBPATH="$(EXTRA_PATH):${LIBPATH}" \
		  SHLIB_PATH="$(EXTRA_PATH):${SHLIB_PATH}" \
		  PATH="$(EXTRA_PATH):$(PATH)" \
		  TCLLIBPATH="$(top_builddir)"
TCLSH_PROG	= @TCLSH_PROG@
TCLSH		= $(TCLSH_ENV) $(TCLSH_PROG)

INCLUDES	= @TCL_INCLUDES@ @AOL_INCLUDES@

EXTRA_CFLAGS	= $(MEM_DEBUG_FLAGS) @EXTRA_CFLAGS@

DEFS		= @DEFS@ $(TCL_DEFS) $(EXTRA_CFLAGS)

CONFIG_CLEAN_FILES = Makefile pkgIndex.tcl

CPPFLAGS	= @CPPFLAGS@
LIBS		= @LIBS@
AR		= ar
CFLAGS		= @CFLAGS@
COMPILE		= $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)

#========================================================================
# Start of user-definable TARGETS section
#========================================================================

#========================================================================
# TEA TARGETS.  Please note that the "libraries:" target refers to platform
# independent files, and the "binaries:" target inclues executable programs and
# platform-dependent libraries.  Modify these targets so that they install
# the various pieces of your package.  The make and install rules
# for the BINARIES that you specified above have already been done.
#========================================================================

all: binaries libraries doc

#========================================================================
# The binaries target builds executable programs, Windows .dll's, unix
# shared/static libraries, and any other platform-dependent files.
# The list of targets to build for "binaries:" is specified at the top
# of the Makefile, in the "BINARIES" variable.
#========================================================================

binaries: $(BINARIES)

libraries:

doc:

X-doc:
	@echo "If you have documentation to create, place the commands to"
	@echo "build the docs in the 'doc:' target.  For example:"
	@echo ""
	@echo "xml2nroff exampleA.xml > exampleA.n"
	@echo "xml2html exampleA.xml > exampleA.html"

install: all install-binaries install-doc

install-binaries: binaries install-lib-binaries install-bin-binaries
	$(INSTALL_DATA) pkgIndex.tcl $(DESTDIR)$(pkglibdir);

#========================================================================
# This rule installs platform-independent files, such as header files.
#========================================================================

install-libraries: libraries
	@mkdir -p $(DESTDIR)$(includedir)
	@echo "Installing header files in $(DESTDIR)$(includedir)"
	@for i in $(GENERIC_HDRS) ; do \
	    echo "Installing $$i" ; \
	    $(INSTALL_DATA) $$i $(DESTDIR)$(includedir) ; \
	done;

#========================================================================
# Install documentation.  Unix manpages should go in the $(mandir)
# directory.
#========================================================================

install-doc: doc
	@mkdir -p $(DESTDIR)$(mandir)/man3
	@echo "Installing documentation in $(DESTDIR)$(mandir)"
	@for i in $(srcdir)/doc/man/*.3tcl; do \
	    echo "Installing $$i"; \
	    rm -f $(DESTDIR)$(mandir)/man3/`basename $$i`; \
	    $(INSTALL_DATA) $$i $(DESTDIR)$(mandir)/man3 ; \
	done

test: binaries libraries
	$(TCLSH) `@CYGPATH@ $(srcdir)/tests/all.tcl` $(TESTFLAGS)

shell: binaries libraries
	@$(TCLSH) $(SCRIPT)

gdb:
	$(TCLSH_ENV) gdb $(TCLSH_PROG) $(SCRIPT)

depend:

#========================================================================
# $($(PACKAGE)_LIB_FILE) should be listed as part of the BINARIES variable
# mentioned above.  That will ensure that this target is built when you
# run "make binaries".
#
# The $($(PACKAGE)_OBJECTS) objects are created and linked into the final
# library.  In most cases these object files will correspond to the
# source files above.
#========================================================================

$($(PACKAGE)_LIB_FILE): $($(PACKAGE)_OBJECTS)
	-rm -f $($(PACKAGE)_LIB_FILE)
	${MAKE_LIB}
	$(RANLIB) $($(PACKAGE)_LIB_FILE)

#========================================================================
# We need to enumerate the list of .c to .o lines here.
#
# In the following lines, $(srcdir) refers to the toplevel directory
# containing your extension.  If your sources are in a subdirectory,
# you will have to modify the paths to reflect this:
#
# threadCmd.$(OBJEXT): $(srcdir)/generic/threadCmd.c
#	$(COMPILE) -c `@CYGPATH@ $(srcdir)/generic/threadCmd.c` -o $@
#
# Setting the VPATH variable to a list of paths will cause the 
# makefile to look into these paths when resolving .c to .obj
# dependencies.
#========================================================================

VPATH = $(srcdir)/generic:$(srcdir)/unix:$(srcdir)/win

.c.$(OBJEXT):
	$(COMPILE) -c `@CYGPATH@ $<` -o $@

#========================================================================
# Distribution creation
# You may need to tweak this target to make it work correctly.
#========================================================================

#COMPRESS	= tar cvf $(PKG_DIR).tar $(PKG_DIR); compress $(PKG_DIR).tar
COMPRESS	= gtar zcvf $(PKG_DIR).tar.gz $(PKG_DIR)
DIST_ROOT	= /tmp/dist
DIST_DIR	= $(DIST_ROOT)/$(PKG_DIR)

dist-clean:
	rm -rf $(DIST_DIR) $(DIST_ROOT)/$(PKG_DIR).tar.*

dist: dist-clean
	mkdir -p $(DIST_DIR)
	cp -p $(srcdir)/ChangeLog $(srcdir)/README* $(srcdir)/license* \
		$(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/*.in \
		$(DIST_DIR)/
	chmod 664 $(DIST_DIR)/Makefile.in $(DIST_DIR)/aclocal.m4
	chmod 775 $(DIST_DIR)/configure $(DIST_DIR)/configure.in

	mkdir $(DIST_DIR)/tclconfig
	cp $(srcdir)/tclconfig/install-sh $(srcdir)/tclconfig/tcl.m4 \
		$(DIST_DIR)/tclconfig/
	chmod 664 $(DIST_DIR)/tclconfig/tcl.m4
	chmod +x $(DIST_DIR)/tclconfig/install-sh

	list='demos doc generic library mac tests unix win'; \
	for p in $$list; do \
	    if test -d $(srcdir)/$$p ; then \
		mkdir $(DIST_DIR)/$$p; \
		cp -p $(srcdir)/$$p/*.* $(DIST_DIR)/$$p/; \
	    fi; \
	done

	(cd $(DIST_ROOT); $(COMPRESS);)

#========================================================================
# End of user-definable section
#========================================================================

#========================================================================
# Don't modify the file to clean here.  Instead, set the "CLEANFILES"
# variable in configure.in
#========================================================================

clean:  
	-test -z "$(BINARIES)" || rm -f $(BINARIES)
	-rm -f *.$(OBJEXT) core *.core
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean: clean
	-rm -f *.tab.c
	-rm -f $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log config.status

#========================================================================
# Install binary object libraries.  On Windows this includes both .dll and
# .lib files.  Because the .lib files are not explicitly listed anywhere,
# we need to deduce their existence from the .dll file of the same name.
# Additionally, the .dll files go into the bin directory, but the .lib
# files go into the lib directory.  On Unix platforms, all library files
# go into the lib directory.  In addition, this will generate the pkgIndex.tcl
# file in the install location (assuming it can find a usable tclsh8.2 shell)
#
# You should not have to modify this target.
#========================================================================

install-lib-binaries:
	@mkdir -p $(DESTDIR)$(pkglibdir)
	@list='$(lib_BINARIES)'; for p in $$list; do \
	  if test -f $$p; then \
	    echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p"; \
	    $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p; \
	    echo " $(RANLIB) $(DESTDIR)$(pkglibdir)/$$p"; \
	    $(RANLIB) $(DESTDIR)$(pkglibdir)/$$p; \
	    ext=`echo $$p|sed -e "s/.*\.//"`; \
	    if test "x$$ext" = "xdll"; then \
		lib=`basename $$p|sed -e 's/.[^.]*$$//'`.lib; \
		if test -f $$lib; then \
		    echo " $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib"; \
	            $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib; \
		fi; \
	    fi; \
	  fi; \
	done

#========================================================================
# Install binary executables (e.g. .exe files)
#
# You should not have to modify this target.
#========================================================================

install-bin-binaries:
	@mkdir -p $(DESTDIR)$(bindir)
	@list='$(bin_BINARIES)'; for p in $$list; do \
	  if test -f $$p; then \
	    echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p"; \
	    $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p; \
	  fi; \
	done

.SUFFIXES: .c .$(OBJEXT)

Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) \
	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status

uninstall-binaries:
	list='$(BINARIES)'; for p in $$list; do \
	  rm -f $(DESTDIR)$(libdir)/$$p; \
	done

.PHONY: all binaries clean depend distclean doc install libraries test

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
