/*========================================================================= Program: Visualization Toolkit Module: $RCSfile: vtkImageMagnify.cxx,v $ Language: C++ Date: $Date: 2000/12/10 20:09:07 $ Version: $Revision: 1.34 $ Thanks: Thanks to C. Charles Law who developed this class. Copyright (c) 1993-2001 Ken Martin, Will Schroeder, Bill Lorensen All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither name of Ken Martin, Will Schroeder, or Bill Lorensen nor the names of any contributors may be used to endorse or promote products derived from this software without specific prior written permission. * Modified source versions must be plainly marked as such, and must not be misrepresented as being the original software. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. =========================================================================*/ #include "vtkImageMagnify.h" #include "vtkObjectFactory.h" //------------------------------------------------------------------------------ vtkImageMagnify* vtkImageMagnify::New() { // First try to create the object from the vtkObjectFactory vtkObject* ret = vtkObjectFactory::CreateInstance("vtkImageMagnify"); if(ret) { return (vtkImageMagnify*)ret; } // If the factory was unable to create the object, then create it here. return new vtkImageMagnify; } //---------------------------------------------------------------------------- // Constructor: Sets default filter to be identity. vtkImageMagnify::vtkImageMagnify() { int idx; this->Interpolate = 0; for (idx = 0; idx < 3; ++idx) { this->MagnificationFactors[idx] = 1; } } //---------------------------------------------------------------------------- // Computes any global image information associated with regions. void vtkImageMagnify::ExecuteInformation(vtkImageData *inData, vtkImageData *outData) { float *spacing; int idx; int *inExt; float outSpacing[3]; int outExt[6]; inExt = inData->GetWholeExtent(); spacing = inData->GetSpacing(); for (idx = 0; idx < 3; idx++) { // Scale the output extent outExt[idx*2] = inExt[idx*2] * this->MagnificationFactors[idx]; outExt[idx*2+1] = outExt[idx*2] + (inExt[idx*2+1] - inExt[idx*2] + 1)*this->MagnificationFactors[idx] - 1; // Change the data spacing outSpacing[idx] = spacing[idx] / (float)(this->MagnificationFactors[idx]); } outData->SetWholeExtent(outExt); outData->SetSpacing(outSpacing); } //---------------------------------------------------------------------------- // This method computes the Region of input necessary to generate outRegion. // It assumes offset and size are multiples of Magnify Factors. void vtkImageMagnify::ComputeInputUpdateExtent(int inExt[6], int outExt[6]) { int idx; for (idx = 0; idx < 3; idx++) { // For Min. Round Down inExt[idx*2] = (int)(floor((float)(outExt[idx*2]) / (float)(this->MagnificationFactors[idx]))); inExt[idx*2+1] = (int)(floor((float)(outExt[idx*2+1]) / (float)(this->MagnificationFactors[idx]))); } } //---------------------------------------------------------------------------- // The templated execute function handles all the data types. // 2d even though operation is 1d. // Note: Slight misalignment (pixel replication is not nearest neighbor). template static void vtkImageMagnifyExecute(vtkImageMagnify *self, vtkImageData *inData, T *inPtr, int inExt[6], vtkImageData *outData, T *outPtr, int outExt[6], int id) { int idxC, idxX, idxY, idxZ; int inIdxX, inIdxY, inIdxZ; int inMaxX, inMaxY, inMaxZ; int maxC, maxX, maxY, maxZ; int inIncX, inIncY, inIncZ; int outIncX, outIncY, outIncZ; unsigned long count = 0; unsigned long target; int interpolate; int magXIdx, magX; int magYIdx, magY; int magZIdx, magZ; T *inPtrZ, *inPtrY, *inPtrX, *outPtrC; float iMag, iMagP, iMagPY, iMagPZ, iMagPYZ; T dataP, dataPX, dataPY, dataPZ; T dataPXY, dataPXZ, dataPYZ, dataPXYZ; int interpSetup; interpolate = self->GetInterpolate(); magX = self->GetMagnificationFactors()[0]; magY = self->GetMagnificationFactors()[1]; magZ = self->GetMagnificationFactors()[2]; iMag = 1.0/(magX*magY*magZ); // find the region to loop over maxC = outData->GetNumberOfScalarComponents(); maxX = outExt[1] - outExt[0]; maxY = outExt[3] - outExt[2]; maxZ = outExt[5] - outExt[4]; target = (unsigned long)(maxC*(maxZ+1)*(maxY+1)/50.0); target++; // Get increments to march through data inData->GetIncrements(inIncX, inIncY, inIncZ); outData->GetContinuousIncrements(outExt, outIncX, outIncY, outIncZ); // Now I am putting in my own boundary check because of ABRs and FMRs // And I do not understand (nor do I care to figure out) what // Ken is doing with his checks. (Charles) inMaxX = inExt[1]; inMaxY = inExt[3]; inMaxZ = inExt[5]; inData->GetExtent(idxC, inMaxX, idxC, inMaxY, idxC, inMaxZ); // Loop through ouput pixels for (idxC = 0; idxC < maxC; idxC++) { inPtrZ = inPtr + idxC; inIdxZ = inExt[4]; outPtrC = outPtr + idxC; magZIdx = magZ - outExt[4]%magZ - 1; for (idxZ = 0; idxZ <= maxZ; idxZ++, magZIdx--) { inPtrY = inPtrZ; inIdxY = inExt[2]; magYIdx = magY - outExt[2]%magY - 1; for (idxY = 0; !self->AbortExecute && idxY <= maxY; idxY++, magYIdx--) { if (!id) { if (!(count%target)) { self->UpdateProgress(count/(50.0*target)); } count++; } if (interpolate) { // precompute some values for interpolation iMagP = (magYIdx + 1)*(magZIdx + 1)*iMag; iMagPY = (magY - magYIdx - 1)*(magZIdx + 1)*iMag; iMagPZ = (magYIdx + 1)*(magZ - magZIdx - 1)*iMag; iMagPYZ = (magY - magYIdx - 1)*(magZ - magZIdx - 1)*iMag; } magXIdx = magX - outExt[0]%magX - 1; inPtrX = inPtrY; inIdxX = inExt[0]; interpSetup = 0; for (idxX = 0; idxX <= maxX; idxX++, magXIdx--) { // Pixel operation if (!interpolate) { *outPtrC = *inPtrX; } else { // setup data values for interp, overload dataP as an // indicator of if this has been done yet if (!interpSetup) { int tiX, tiY, tiZ; dataP = *inPtrX; // Now I am putting in my own boundary check because of // ABRs and FMRs // And I do not understand (nor do I care to figure out) what // Ken was doing with his checks. (Charles) if (inIdxX < inMaxX) { tiX = inIncX; } else { tiX = 0; } if (inIdxY < inMaxY) { tiY = inIncY; } else { tiY = 0; } if (inIdxZ < inMaxZ) { tiZ = inIncZ; } else { tiZ = 0; } dataPX = *(inPtrX + tiX); dataPY = *(inPtrX + tiY); dataPZ = *(inPtrX + tiZ); dataPXY = *(inPtrX + tiX + tiY); dataPXZ = *(inPtrX + tiX + tiZ); dataPYZ = *(inPtrX + tiY + tiZ); dataPXYZ = *(inPtrX + tiX + tiY + tiZ); interpSetup = 1; } *outPtrC = (T) ((float)dataP*(magXIdx + 1)*iMagP + (float)dataPX*(magX - magXIdx - 1)*iMagP + (float)dataPY*(magXIdx + 1)*iMagPY + (float)dataPXY*(magX - magXIdx - 1)*iMagPY + (float)dataPZ*(magXIdx + 1)*iMagPZ + (float)dataPXZ*(magX - magXIdx - 1)*iMagPZ + (float)dataPYZ*(magXIdx + 1)*iMagPYZ + (float)dataPXYZ*(magX - magXIdx - 1)*iMagPYZ); } outPtrC += maxC; if (!magXIdx) { inPtrX += inIncX; ++inIdxX; magXIdx = magX; interpSetup = 0; } } outPtrC += outIncY; if (!magYIdx) { inPtrY += inIncY; ++inIdxY; magYIdx = magY; } } outPtrC += outIncZ; if (!magZIdx) { inPtrZ += inIncZ; ++inIdxZ; magZIdx = magZ; } } } } void vtkImageMagnify::ThreadedExecute(vtkImageData *inData, vtkImageData *outData, int outExt[6], int id) { int inExt[6]; this->ComputeInputUpdateExtent(inExt,outExt); void *inPtr = inData->GetScalarPointerForExtent(inExt); void *outPtr = outData->GetScalarPointerForExtent(outExt); vtkDebugMacro(<< "Execute: inData = " << inData << ", outData = " << outData); // this filter expects that input is the same type as output. if (inData->GetScalarType() != outData->GetScalarType()) { vtkErrorMacro(<< "Execute: input ScalarType, " << inData->GetScalarType() << ", must match out ScalarType " << outData->GetScalarType()); return; } switch (inData->GetScalarType()) { vtkTemplateMacro8(vtkImageMagnifyExecute, this, inData, (VTK_TT *)(inPtr), inExt, outData, (VTK_TT *)(outPtr), outExt, id); default: vtkErrorMacro(<< "Execute: Unknown ScalarType"); return; } } void vtkImageMagnify::PrintSelf(ostream& os, vtkIndent indent) { vtkImageToImageFilter::PrintSelf(os,indent); os << indent << "MagnificationFactors: ( " << this->MagnificationFactors[0] << ", " << this->MagnificationFactors[1] << ", " << this->MagnificationFactors[2] << " )\n"; os << indent << "Interpolate: " << (this->Interpolate ? "On\n" : "Off\n"); }