# Makefile.in generated automatically by automake 1.4-p4 from Makefile.am

# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

#all other files that are distributed


# beginning of file Makefile.conf

#
# GIMP: Adds GIMP plugin functionality to xmorph.
#   Also define NEED_GIMP=1.  If this is defined, then you may run
#   xmorph both as a standalone application, and by adding it to your
#   ~/.gimp/plug-ins directory (usually via a symlink).  From what I
#   understand, this will not work for tkmorph.  See GIMPLIBS, below.
#
# REAL: Size of a "REAL" used by spline code.
#   Correct value is "double".  Do not change.
#
# RGBA_MESH_WARP: flag to tell RgbaImage to include mesh-based warping
#   methods.  Do not change.
#
# RGBA_TK: flag to tell RgbaImage to include Tk Photo image code.
#   DO NOT DEFINE for xmorph.  Only define for tkmorph.
#   Also change the "all" target if RGBA_TK is changed.
#
# RED_GREEN_COLOR_BLIND: uses blue instead of red for color of
#   'destination' mesh lines and points.
#
# STRDUP_PROTO_BROKEN: For some versions of GNU C, the string.h
#   header file has an incorrect prototype for strdup.  If you
#   experience problems compiling, related to the strdup prototype,
#   then define STRDUP_PROTO_BROKEN.

# For tkmorph:
#DEFINES=-DREAL=double -DRGBA_MESH_WARP -DRGBA_TK

# For colorblind:
#DEFINES=-DREAL=double -DRGBA_MESH_WARP -DRED_GREEN_COLOR_BLIND

# For GIMP plugin:
#DEFINES=-DREAL=double -DRGBA_MESH_WARP -DGIMP -DNEED_GIMP=1

# Broken GNU C:
#DEFINES=-DREAL=double -DRGBA_MESH_WARP -DSTRDUP_PROTO_BROKEN

# Most systems:
#DEFINES=-DREAL=double -DRGBA_MESH_WARP


SHELL = @SHELL@

srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@

bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include

DESTDIR =

pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@

top_builddir = .

ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@

INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
transform = @program_transform_name@

NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_alias = @host_alias@
host_triplet = @host@
AS = @AS@
BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
CATALOGS = @CATALOGS@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
CFLAGS_DEBUG = @CFLAGS_DEBUG@
CFLAGS_OPTIMIZE = @CFLAGS_OPTIMIZE@
CFLAGS_WARNING = @CFLAGS_WARNING@
DATADIRNAME = @DATADIRNAME@
DLLTOOL = @DLLTOOL@
DL_LIBS = @DL_LIBS@
ECHO = @ECHO@
EXEEXT = @EXEEXT@
GDK_PIXBUF_CFLAGS = @GDK_PIXBUF_CFLAGS@
GDK_PIXBUF_CONFIG = @GDK_PIXBUF_CONFIG@
GDK_PIXBUF_LIBS = @GDK_PIXBUF_LIBS@
GENCAT = @GENCAT@
GLIBC21 = @GLIBC21@
GMOFILES = @GMOFILES@
GMSGFMT = @GMSGFMT@
GTK_CFLAGS = @GTK_CFLAGS@
GTK_CONFIG = @GTK_CONFIG@
GTK_LIBS = @GTK_LIBS@
INSTOBJEXT = @INSTOBJEXT@
INTLBISON = @INTLBISON@
INTLLIBS = @INTLLIBS@
INTLOBJS = @INTLOBJS@
INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
LIBICONV = @LIBICONV@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
MAKEINFO = @MAKEINFO@
MATH_LIBS = @MATH_LIBS@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
POFILES = @POFILES@
POSUB = @POSUB@
RANLIB = @RANLIB@
STRIP = @STRIP@
TCL_BIN_DIR = @TCL_BIN_DIR@
TCL_LIBS = @TCL_LIBS@
TCL_LIB_FILE = @TCL_LIB_FILE@
TCL_SRC_DIR = @TCL_SRC_DIR@
TK_BIN_DIR = @TK_BIN_DIR@
TK_LIB_FILE = @TK_LIB_FILE@
TK_SRC_DIR = @TK_SRC_DIR@
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
VERSION = @VERSION@

EXTRA_DIST = gtkmorph/ChangeLog AUTHORS INSTALL README gimp-README TODO HISTORY   configure   po/gtkmorph.glade.c   Makefile.conf gtkmorph.glade


CFLAGS_CONF = -DREAL=double -DRGBA_MESH_WARP

#
# Must have the X libraries: X11, MIT Athena Widgets, X Toolkit, X Misc Utils
#
# Linux 2.0: must have /usr/X11/lib
#   or /usr/X11R6/lib explicitly in library search path
#
# SunOS (pre-Solaris): Might have to use static X libraries because
#   dynamic X libraries are incomplete.
#
# Solaris: To link to openwin libraries, add -L/usr/openwin/lib
#
# IRIX6.2: Need to have -lcvt after -lXt
#   If you receive an error about an unresolved symbol named
#   SgCvtCreateConversionContext, you need to include -lcvt.
#   The cvt library is available in the goldengate.sw.goldengate package

# Sun Solaris:
#XLIBS=-L/usr/openwin/lib -lXaw -lXmu -lXext -lXt -lX11

# Linux:
#XLIBS=-L/usr/X11/lib -lXaw -lXmu -lXext -lXt -lX11
#XLIBS=-L/usr/X11R6/lib -lXaw -lXmu -lXext -lXt -lX11

# SGI IRIX:
#XLIBS=              -lXaw -lXmu -lXext -lXt -lcvt -lX11

XLIBS = @X_LIBS@ @X_PRE_LIBS@ -lXaw -lXmu -lXext -lXt -lX11 @X_EXTRA_LIBS@

# If you have defined -DGIMP in the DEFINES section, then xmorph will
# be built to run both as a standalone application and as a GIMP
# plugin.  Here, you need to specify the appropriate GIMP libraries.
#
# Comment out this variable if you have not used -DGIMP.

#GIMPLIBS=-L/usr/local/lib -lgimp -lglib
#GIMPLIBS=-lgimp -lglib

GIMPLIBS = 

#
# Must have the math library (-lm).
#
#
# Linux: Add -ldl if you get link error regarding dlerror, dlopen, or
#   dlsym
#
#
# FreeBSD: Do not use static libraries, because for some reason they
#   do not work.
#
#
# SunOS: Use the /usr/lib/debug/malloc.o module if you want to do
#   memory checking.
#   Also see the CFLAGS comments about memory checking under SunOS.
#
#
# SGI IRIX: Use -lmalloc to link with their special memory allocation
#   routines.  If you get an error about mallopt being
#   unresolved, then you will have to link with the libmalloc
#   shared object.  Do this by specifying -lmalloc here.
#
#   -lmalloc_cv has more robust memory checking

#NON_GUI_LIBS = -lm
#NON_GUI_LIBS = -lm -ldl
#NON_GUI_LIBS = -lm /usr/lib/debug/malloc.o
#NON_GUI_LIBS = -lm -lmalloc

NON_GUI_LIBS = -lm
@COND_MORPH_TRUE@SUBDIRS1 = morph
@COND_MORPH_FALSE@SUBDIRS1 = 
@COND_XMORPH_TRUE@SUBDIRS2 = $(SUBDIRS1) xmorph
@COND_XMORPH_FALSE@SUBDIRS2 = 
@COND_GTKMORPH_TRUE@SUBDIRS3 = $(SUBDIRS2) gtkmorph
@COND_GTKMORPH_FALSE@SUBDIRS3 = $(SUBDIRS2)
@COND_TKMORPH_TRUE@SUBDIRS4 = $(SUBDIRS3) tkmorph
@COND_TKMORPH_FALSE@SUBDIRS4 = $(SUBDIRS3)

SUBDIRS = intl po doc libmorph $(SUBDIRS4)
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = 
DIST_COMMON =  README ./stamp-h.in ABOUT-NLS AUTHORS COPYING ChangeLog \
INSTALL Makefile.am Makefile.in NEWS TODO acconfig.h aclocal.m4 \
config.guess config.h.in config.sub configure configure.in install-sh \
ltconfig ltmain.sh missing mkinstalldirs


DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)

TAR = tar
GZIP_ENV = --best
DIST_SUBDIRS =  intl po doc libmorph morph xmorph gtkmorph morph xmorph \
tkmorph morph xmorph gtkmorph morph xmorph
all: all-redirect
.SUFFIXES:
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(srcdir)/Makefile.conf
	cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile

Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
	cd $(top_builddir) \
	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status

$(ACLOCAL_M4):  configure.in 
	cd $(srcdir) && $(ACLOCAL)

config.status: $(srcdir)/configure.in $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck
$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
	cd $(srcdir) && $(AUTOCONF)

config.h: stamp-h
	@if test ! -f $@; then \
		rm -f stamp-h; \
		$(MAKE) stamp-h; \
	else :; fi
stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status
	cd $(top_builddir) \
	  && CONFIG_FILES= CONFIG_HEADERS=config.h \
	     $(SHELL) ./config.status
	@echo timestamp > stamp-h 2> /dev/null
$(srcdir)/config.h.in: $(srcdir)/stamp-h.in
	@if test ! -f $@; then \
		rm -f $(srcdir)/stamp-h.in; \
		$(MAKE) $(srcdir)/stamp-h.in; \
	else :; fi
$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) acconfig.h
	cd $(top_srcdir) && $(AUTOHEADER)
	@echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null

mostlyclean-hdr:

clean-hdr:

distclean-hdr:
	-rm -f config.h

maintainer-clean-hdr:

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.

@SET_MAKE@

all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive  \
check-recursive installcheck-recursive info-recursive dvi-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
	  rev="$$subdir $$rev"; \
	  test "$$subdir" = "." && dot_seen=yes; \
	done; \
	test "$$dot_seen" = "no" && rev=". $$rev"; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP)
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	here=`pwd` && cd $(srcdir) \
	  && mkid -f$$here/ID $$unique $(LISP)

TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
   if test "$$subdir" = .; then :; else \
	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
   fi; \
	done; \
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \
	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP) -o $$here/TAGS)

mostlyclean-tags:

clean-tags:

distclean-tags:
	-rm -f TAGS ID

maintainer-clean-tags:

distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	-rm -rf $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
	mkdir $(distdir)/=build
	mkdir $(distdir)/=inst
	dc_install_base=`cd $(distdir)/=inst && pwd`; \
	cd $(distdir)/=build \
	  && ../configure --with-included-gettext --srcdir=.. --prefix=$$dc_install_base \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) dist
	-rm -rf $(distdir)
	@banner="$(distdir).tar.gz is ready for distribution"; \
	dashes=`echo "$$banner" | sed s/./=/g`; \
	echo "$$dashes"; \
	echo "$$banner"; \
	echo "$$dashes"
dist: distdir
	-chmod -R a+r $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
	-rm -rf $(distdir)
dist-all: distdir
	-chmod -R a+r $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
	-rm -rf $(distdir)
distdir: $(DISTFILES)
	-rm -rf $(distdir)
	mkdir $(distdir)
	-chmod 777 $(distdir)
	here=`cd $(top_builddir) && pwd`; \
	top_distdir=`cd $(distdir) && pwd`; \
	distdir=`cd $(distdir) && pwd`; \
	cd $(top_srcdir) \
	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu Makefile
	$(mkinstalldirs) $(distdir)/gtkmorph $(distdir)/po
	@for file in $(DISTFILES); do \
	  d=$(srcdir); \
	  if test -d $$d/$$file; then \
	    cp -pr $$d/$$file $(distdir)/$$file; \
	  else \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file || :; \
	  fi; \
	done
	for subdir in $(DIST_SUBDIRS); do \
	  if test "$$subdir" = .; then :; else \
	    test -d $(distdir)/$$subdir \
	    || mkdir $(distdir)/$$subdir \
	    || exit 1; \
	    chmod 777 $(distdir)/$$subdir; \
	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-hook
info-am:
info: info-recursive
dvi-am:
dvi: dvi-recursive
check-am: all-am
check: check-recursive
installcheck-am:
installcheck: installcheck-recursive
all-recursive-am: config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

install-exec-am:
install-exec: install-exec-recursive

install-data-am: install-data-local
install-data: install-data-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am:
uninstall: uninstall-recursive
all-am: Makefile config.h
all-redirect: all-recursive-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:


mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log stamp-h stamp-h[0-9]*

maintainer-clean-generic:
mostlyclean-am:  mostlyclean-hdr mostlyclean-tags mostlyclean-generic

mostlyclean: mostlyclean-recursive

clean-am:  clean-hdr clean-tags clean-generic mostlyclean-am

clean: clean-recursive

distclean-am:  distclean-hdr distclean-tags distclean-generic clean-am
	-rm -f libtool

distclean: distclean-recursive
	-rm -f config.status

maintainer-clean-am:  maintainer-clean-hdr maintainer-clean-tags \
		maintainer-clean-generic distclean-am
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."

maintainer-clean: maintainer-clean-recursive
	-rm -f config.status

.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
install-data-recursive uninstall-data-recursive install-exec-recursive \
uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
all-recursive check-recursive installcheck-recursive info-recursive \
dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \
install-exec-am install-exec install-data-local install-data-am \
install-data install-am install uninstall-am uninstall all-redirect \
all-am all installdirs-am installdirs mostlyclean-generic \
distclean-generic clean-generic maintainer-clean-generic clean \
mostlyclean distclean maintainer-clean


#
### ACGM : the project now ignores this variable
#
# Read the man page for your linker before sending me email about
# problems.
#
# Apollo w/ Domain/OS, BSD: omit XLIBS

#LIBS = $(GIMPLIBS) $(NON_GUI_LIBS)
#LIBS =

# end of file Makefile.conf

install-data-local:
	@$(NORMAL_INSTALL)
	if test -d $(srcdir)/pixmaps; then \
	  $(mkinstalldirs) $(DESTDIR)$(pkgdatadir)/pixmaps; \
	  for pixmap in $(srcdir)/pixmaps/*; do \
	    if test -f $$pixmap; then \
	      $(INSTALL_DATA) $$pixmap $(DESTDIR)$(pkgdatadir)/pixmaps; \
	    fi \
	  done \
	fi

dist-hook:
	if test -d pixmaps; then \
	  mkdir $(distdir)/pixmaps; \
	  for pixmap in pixmaps/*; do \
	    if test -f $$pixmap; then \
	      cp -p $$pixmap $(distdir)/pixmaps; \
	    fi \
	  done \
	fi

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
