#!/bin/bash
MSG_FILE=tmp-messages

if [ x`uname | grep Linux` != x"" ] ; then
	NUM_PROCS=`cat /proc/cpuinfo | grep cores | uniq | sed 's/.*:\s*//'`
else
	#For other platforms, guess!
	NUM_PROCS=4
fi




if [ ! -f configure ] ; then
	echo "Configure not found -- are you running this script from the top dir? " 
	exit 1
fi

#Don't overwrite message file
while [ -f $MSG_FILE ] ; 
do
	MSG_FILE=tmp-$MSG_FILE
done
	
#Check build for combinations of 
#	- enable/disable parallel 
#	- debug checking
#	- C++11
#	- ubsan
#-------
#CONF_ARGS=("--enable-openmp-parallel" "--disable-debug-checks " " --enable-debug-checks " " --enable-openmp-parallel --disable-debug-checks " " --enable-ubsan --enable-openmp-parallel " " --enable-ubsan "  )
#
#for i in ${CONF_ARGS[*]}
#do
#	if [ -f Makefile ] ; then
#		make distclean
#	fi
#
#	./configure "$i"
#
#	if [ $? -ne 0 ] ; then
#		echo "test-configuration failed to configure: arguments are $i"
#		exit 1
#	fi
#
#	if [ ! -f Makefile ] ; then
#		echo "Configure claimed everything was OK, but did not create a Makefile"
#		exit 1
#	fi
#
#	make -j $NUM_PROCS
#	if [ $? -ne 0 ] ; then
#		echo "failed to build: arguments are $i"
#		exit 1
#	fi
#
#	#Check for unit test availability, and run them
#	# where possible
#	pushd src
#	TEST_FLAG=`./3Depict --help  2>&1 | grep "\-\-test"`
#	if [ x"$TEST_FLAG" != x"" ] ; then
#		./3Depict -t
##		if [ $? -ne 0 ] ; then
##			echo "Unit tests failed for configure flag : $i" 
###			exit 1
##		fi
#	fi
#	popd	
#      
#	make distclean
#done
#-------

./configure
if [ $? -ne 0 ] ; then
	echo "Something went wrong with configure. Cannot continue"
	exit 1
fi
rm -rf autom4te.cache

#Build tarball
make dist -j $NUM_PROCS

if [ $? -ne 0 ] ; then
	echo "make dist failed";
	exit 1;
fi

#Various release-time checks
#----

echo "--------- RUNNING SANITY CHECKS -------"

#Check version
VER=`ls 3depict-*gz | sed 's/^3depict-\([0-9\.]*\).tar.gz$/\1/' `
echo "Version is apparently :" $VER

if [ x"`grep $VER .hgtags`" == x""  ] ; then
	echo " NOTICE: version number not seen in HG file..." >> $MSG_FILE
else
	echo " NOTICE: Version number exists in HG (OK)" >> $MSG_FILE
fi

#Check version number in various files is set concomitantly.
if [ x"`grep $VER ChangeLog.txt`" == x"" ] ; then
	echo " WARNING: Program version not set to match between configure.ac. and ChangeLog">> $MSG_FILE
fi

if [ x"`grep PROGRAM_VERSION src/common/constants.cpp | grep $VER`" == x"" ] ; then
	echo " WARNING: Program version not set to match between configure.ac. and constants.cpp">> $MSG_FILE
fi

#Check version number in deb & rpm
if [ x"`head -n 1 packaging/debian/changelog |grep 3depict | grep $VER`"  = x"" ] ; then
	echo " WARNING: Program version does not match between configure.ac and packaging/debian/changelog" >> $MSG_FILE
fi

if [ x"` grep '^Version:' packaging/RPM/3Depict.spec  | grep $VER`"  = x"" ] ; then
	echo " WARNING: Program version does not match between configure.ac and packaging/RPM/3Depict.spec" >> $MSG_FILE
fi

if [ x"` grep 'PRODUCT_VERSION'  packaging/mingw-debian-cross/windows-installer.nsi | grep $VER`"  = x"" ] ; then
	echo " WARNING: Program version does not match between configure.ac and packaging/mingw-debian-cross/windows-installer.nsi" >> $MSG_FILE
fi

#Check latex manual
if [ x"`grep --after-context=2 'Version:' docs/manual-latex/manual.tex | grep $VER`" == x"" ] ; then
	echo " WARNING: Program version does not match between configure.ac and docs/manual-latex/manual.tex" >> $MSG_FILE
fi

#Check that the fp exceptions are disabled.
if [ x"`grep feenableexcept src/3Depict.cpp | egrep -v '^\s*//'`" != x"" ] ; then
	echo " WARNING: Floating point exceptions still appear to be enabled..." >> $MSG_FILE
fi

#check that we are not using preprocessor macros incorrectly
#Apple preprocessor is exactly __APPLE__
RES=`find src/ -name *.cpp -exec grep APPLE {} \; | egrep '^\s*#' | grep -v EFFECTS_WORKAROUND | grep -v __APPLE__`
if [ x"$RES" != x"" ] ; then
	echo " WARNING: possible incorrect APPLE preprocessor token..." >> $MSG_FILE
	echo "$RES" >> $MSG_FILE
fi

RES=`find src/ -name *.h -exec grep APPLE {} \; | egrep '^\s*#' | grep -v EFFECTS_WORKAROUND | grep -v __APPLE__`
if [ x"$RES" != x"" ] ;  then
	echo " WARNING: possible incorrect APPLE preprocessor token..." >> $MSG_FILE
	echo "$RES" >> $MSG_FILE
fi

#Check for editor ~ files and orig files
SOMEFILES=`find ./ -name \*~`
if [ x"$SOMEFILES" != x"" ] ; then
	echo " WARNING : Found some maybe-backup files (~ extension)" >> $MSG_FILE
	echo "$FILES" >> $MSG_FILE
fi

SOMEFILES=`find ./ -name \*.orig`
if [ x"$SOMEFILES" != x"" ] ; then
	echo " WARNING : Found some maybe-backup files (\"orig\" extension)" >> $MSG_FILE
	echo "$FILES" >> $MSG_FILE
fi

SOMEFILES=`find ./ -name \*.rej`
if [ x"$SOMEFILES" != x"" ] ; then
	echo " WARNING : Found some maybe-backup files (\"rej\" extension)" >> $MSG_FILE
	echo "$FILES" >> $MSG_FILE
fi

#Check that PDF manual is built
PDF_FILE=docs/manual-latex/manual.pdf
if [ ! -f  $PDF_FILE ] ; then
	echo " WARNING : PDF manual was not found -- has it been compiled?" >> $MSG_FILE
	echo "$FILES" >> $MSG_FILE
else 
	#Check PDF is actually a pdf
	if [ x"`file $PDF_FILE | grep "PDF document" `" == x""  ] ; then
		echo " WARNING : PDF manual found, but does not appear to be a valid PDF?" >> $MSG_FILE
		echo "$FILES" >> $MSG_FILE
	
	fi
fi

#Check for outstanding mercurial changes
SOME_LINES=`hg diff | wc -l`
if [ x"$SOME_LINES" != x"0" ] ; then
	echo " WARNING : Oustanding mercurial changes! Normally should commit fixes!" >> $MSG_FILE
fi

#Check translation files for "span" element - transifex has a bad habit of encoding whitspace
SPAN_ELEMENT=`cat translations/3Depict_*po | grep "<span"`
if [ x"$SPAN_ELEMENT" != x"" ] ; then
	echo "WARNING : Found \"span\" element in translation file - normally this is due to transifex incorrectly parsing translation files" >> $MSG_FILE
fi

#Run licensecheck over files, if available
if [ x`which licensecheck` != x"" ] ; then
	LIC_CHECK_OUT=`licensecheck -r  --ignore=".*\.(sh|sci|py|tex|js|Po|am|xml|rng|rrng)$" src/ | grep -v "GPL (v[23] or later)" | grep -v "GENERATED FILE" | grep -v "MPL"  | grep -v "tarball/"`

	if [ x"$LIC_CHECK_OUT" != x"" ] ; then
		echo "WARNING:" $LIC_CHECK_OUT >> $MSG_FILE
	fi
else
	echo "Did not run licensecheck"
fi

if [ x`grep $VER ChangeLog.txt` == x"" ] ; then
	echo "Version missing from changelog"
else
	if [ x`grep $VER ChangeLog.txt |  grep  '?' ` != x"" ] ; then
		echo "Unexpected symbols on version line - Is the date set for the release?"
	fi
fi


#----


rm -rf tarball
mkdir tarball

#Take the autoconf-generated tarball, and perform some fixups, to
# generate the release version
pushd tarball
	tar -zxf ../3depict-$VER.tar.gz
	rm ../3depict-$VER.tar.gz
	#Autoconf buggers up the name case
	mv 3depict-$VER 3Depict-$VER

	#--- Translation stuff--

	#Build the translation files
	pushd ../translations
		./makeTranslations 
		mkdir -p ../tarball/3Depict-$VER/translations
		cp 3Depict*.mo ../tarball/3Depict-$VER/translations/
	popd

	#copy the manual
	cp ../docs/manual-latex/manual.pdf ./tarball/3Depict-$VER/docs/manual-latex/

	#Copy changelog
	cp ChangeLog.txt ./tarball/3Depict-$VER/


	pushd 3Depict-$VER/translations/

	#Move the .mo file to the correct subdir
		for i in `ls *.mo`
		do
			LOCALEVAL=`basename $i | sed 's/\.mo//' | sed 's/3Depict_//'`

			mkdir -p locales/$LOCALEVAL/LC_MESSAGES
			mv $i locales/$LOCALEVAL/LC_MESSAGES/3Depict.mo
		done

		if [ -d locales ] ; then
			mv locales ../
		else
			echo "ERROR: No Locales built.. Aborting"
			exit 1
		fi

	popd

	#--------------


	# Configure stuffs up the directories marked as extra-dist
	# if you don't use a trailing slash, some versions of configure die
	# if you do, other versions of configure add it as a subdir of itself
	# so lets just "fix it"
	#--------
	pushd 3Depict-$VER/
		for i in textures tex-source glade-skeleton 
		do
			if [ -d src/$i/$i ] ; then
				mv src/$i/$i/* src/$i/
				rmdir src/$i/$i/
			fi
		done



		for i in packaging docs m4 translations deps test data
		do
			if [ -d $i/$i ] ; then
				mv $i/$i/* $i/
				rmdir $i/$i/
			fi
		done
	popd

	#make the final source tarball
	tar -cz 3Depict-$VER > 3Depict-$VER.tar.gz
popd
#------

#OK, now try unpacking the thing, then building it.
mkdir tarball/extract/
if [ $? -ne 0 ] ; then
	echo "failed to make tarball extract dir"
fi
pushd tarball/extract

	tar -zxf ../3Depict-$VER.tar.gz

	pushd 3Depict-$VER;
		./configure
		if [ $? -ne 0 ] ; then
			echo "didn't configure after tarball extract"
		fi


		make  -j$NUM_PROCS 
		if [ $? -ne 0 ] ; then
			echo "rebuilding tarball failed."
		else
			echo "tarball rebuild OK!"
		fi

	popd
popd
#--------

if [ -f $MSG_FILE ] ; then
	echo "------------- SUMMARY ----------"
	cat $MSG_FILE
	echo "--------------------------------"

	rm $MSG_FILE
fi