; ACL2 Version 6.5 -- A Computational Logic for Applicative Common Lisp
; Copyright (C) 2014, Regents of the University of Texas

; This version of ACL2 is a descendent of ACL2 Version 1.9, Copyright
; (C) 1997 Computational Logic, Inc.  See the documentation topic NOTE-2-0.

; This program is free software; you can redistribute it and/or modify
; it under the terms of the LICENSE file distributed with ACL2.

; This program is distributed in the hope that it will be useful,
; but WITHOUT ANY WARRANTY; without even the implied warranty of
; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
; LICENSE for more details.

; Written by:  Matt Kaufmann               and J Strother Moore
; email:       Kaufmann@cs.utexas.edu      and Moore@cs.utexas.edu
; Department of Computer Science
; University of Texas at Austin
; Austin, TX 78712 U.S.A.

; Acknowledgments:  Bob Boyer contributed crucially to the design and
; implementation of early versions of ACL2.  Many others, largely at CLI, have
; also contributed to the design of certain features.  We especially thank
; Bishop Brock and John Cowles for their contributions.  See the documentation
; topic ACKNOWLEDGMENTS for more information.

; This research was supported in part at Computational Logic, Inc. by the
; Defense Advanced Research Projects Agency (DARPA), ARPA Orders #6082, 9151
; and 7406 and by the Office of Naval Research, contracts numbers
; N00014-88-C-0454, N00014-91-C-0130, and N00014-94-C-0193.  The views and
; conclusions contained in this document are those of the author(s) and should
; not be interpreted as representing the official policies, either expressed or
; implied, of Computational Logic, Inc., Office of Naval Research, DARPA or the
; U.S. Government.

; This file, acl2.lisp, (a) builds the packages for the ACL2 system, (b)
; defines the functions for loading and compiling ACL2 and for running code
; verified using ACL2, and (c) makes a couple of checks concerning minor,
; non-CLTL, assumptions that we make about Common Lisps in which ACL2 is to
; run.

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;                            CLTL1/CLTL2
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; For the most part, we program in a subset both of CLTL1 and CLTL2.
; However, there are a few places, notably the name of the main
; package for Lisp symbols, where this is impossible.  So we use the
; read conditional #+CLTL2.  If one wishes to run ACL2 under CLTL2,
; execute the following form before commencing compiling or loading:

;        (push :CLTL2 *features*)

; For example, for Allegro and lispworks (respectively) we have the following.

#+(or ansi-cl draft-ansi-cl-2 lispworks clisp ccl)
(push :CLTL2 *features*)

; We use IN-PACKAGE in a way that is consistent with both CLTL1 and
; CLTL2, namely as a macro (i.e., whose argument is not evaluated) for
; switching *package* to an existing package, value ignored.

(in-package #-CLTL2 "USER" #+CLTL2 "COMMON-LISP-USER")

; Avoid warning, at least in Allegro CL, for use of this variable below.  Note
; that it is set to nil using GNUmakefile when ACL2_COMPILER_DISABLED is set.
(defvar *acl2-compiler-enabled*)

; Changes Made in Support of CMU Lisp

; (0) (The following issue with Cmulisp no longer seems to be true, at least
;     as of Version 19e on Linux.)
;     Cmulisp doesn't support EVAL-WHEN.  This meant that in the #+cmu case
;     I had to put down special code to try to do what other lisps do.
;     Generally, this involved just not checking for certain errors (compiling
;     files that weren't supposed to be compiled) in #+cmu that were checked
;     in other lisps.  In one case, namely the initialization of
;     current-acl2-world, it involved a little more.

; (1) cmulisp switches from *standard-input* to *terminal-io* when the input
;     stream reaches eof; our other lisps all exit to the operating system.
;     This means all the batch jobs we submit via make have to be arranged to
;     exit from cmulisp before eof.  This required changing the top-level
;     makefile and the makefiles of all the community books.  I generally put a
;     `:q #+cmu (lisp::quit)' at the end of each workxxx.
;     These could be replaced simply by `:q (acl2::exit-lisp)'.

; (2) Cmulisp checks type assertions at runtime.  I found two of our assertions
;     violated by actual use.  In fmt-char we mistakenly claimed the string's
;     length was less than 101.  This was a typo -- elsewhere in the same
;     function we claimed it was just a fixnum -- apparently caused by
;     copying a type-declaration and failing to edit it thoroughly.  (Another
;     variable was correctly limited to 101.)

;     In maximal-elements1, used in the selection of induction candidates,
;     we claimed (by using int=) that the scores for an induction candidate
;     are integers when in fact they are rationals.

; (3) Evidently, all functions in cmulisp pass the compiled-function-p test.
;     If you defun foo and immediately get its symbol-function you get
;     an object like #<Interpreted function ...>.  If you ask whether
;     this object is a compiled-function-p you get t.  If you compile
;     foo the symbol-function changes to an object like #<Function
;     ...>, which also passes the test.

;     The fact that everything in a symbol-function field looks like a compiled
;     function killed us in an interesting way.  Most locally, it made
;     compile-uncompiled-*1*-defuns write out an empty file of functions to
;     compile, because everything looked compiled already.  But where that
;     really got us was that we use that function to create TMP1.lisp during
;     the bootstrapping.  TMP1.lisp, recall, contains the mechanically
;     generated executable counterparts of logic mode functions defined in
;     axioms.lisp.  By not generating these we built an image in which the
;     relevant functions were undefined.  Because of the rugged way we invoke
;     them, catching errors and producing a HIDE term if we can't eval them,
;     we survived the certification of many books before we finally got to a
;     proof that couldn't be done without running one of those functions.
;     The proof, in the bdd community books, required evaling (nth -1 nil), which
;     according to the axioms is nil but which we couldn't deduce because
;     ACL2_*1*_COMMON-LISP::NTH was undefined.

;     My fix was to define and use compiled-function-p! instead of the standard
;     compiled-function-p.  The new function has a #+/-cmu split in it.  In the
;     cmu case I ask

;     (not (eq (type-of (symbol-function fn)) 'eval:interpreted-function))

;     So I say fn is compiled if its symbol-function is not an object like
;     #<Interpreted function ...>.

; (4) CMU Lisp does not allow us to "undefine" a macro-function.  That is,
;     one is not permitted to store a nil into the macro-function
;     field because nil is not a function.  We do this when we
;     implement undo.  We handle it by storing a dummy function
;     instead, and change the notion of when a symbol is virgin to
;     recognize the case that its symbol-function or macro-function is
;     the dummy.

; (5) We made a few fixes and cleanups in order to avoid compiler warnings.

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;                               SAFETY AND PROCLAIMING
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

(proclaim `(optimize #+cltl2 (compilation-speed 0)

; The user is welcome to modify this proclaim form.  Warning: Keep it in sync
; with the settings in compile-acl2 under #+sbcl.

; The following may allow more tail recursion elimination (from "Lisp
; Knowledgebase" at lispworks.com); might consider for Allegro CL too.

                     #+(or lispworks ccl) (debug 0)
                     #+cmu (extensions:inhibit-warnings 3)
                     #+sbcl (sb-ext:inhibit-warnings 3)
                     (speed 3)

; Consider replacing cmu on the next line with (or cmu sbcl).  The SBCL manual
; says the following, but a quick test with (or cmu sbcl) yielded no smaller
; .core file size and no quicker (mini-proveall).

;   The value of space mostly influences the compiler's decision whether to
;   inline operations, which tend to increase the size of programs. Use the
;   value 0 with caution, since it can cause the compiler to inline operations
;   so indiscriminately that the net effect is to slow the program by causing
;   cache misses or even swapping.

                     (space #+cmu 1 #-cmu 0)

; WARNING:  Do not proclaim (cl-user::fixnum-safety 0) for LispWorks.  Any
; fixnum-safety less than 3 expects all integers to be fixnums!

                     (safety

; Consider using (safety 3) if there is a problem with LispWorks.  It enabled
; us to see a stack overflow involving collect-assumptions in the proof of
; bitn-lam0 from community book books/rtl/rel2/support/lop3.lisp.  The safety
; setting of 3 helped in this example, because, when the safety is set to 0,
; the stack is not always automatically extended upon overflow (despite setting
; system::*stack-overflow-behaviour* to nil in acl2-init.lisp).

; Safety 1 for CCL has avoided the kernel debugger, e.g. for compiled calls
; of car on a non-nil atom.  The following results for CCL show why we have
; decided to keep the safety at 0 by default and why safety 3 is not too bad.
;
; Safety 0:
; 12955.537u 542.877s 3:46:24.68 99.3%  0+0k 0+0io 0pf+0w
;
; Safety 1:
; 15343.578u 562.207s 4:27:03.67 99.2%  0+0k 0+0io 0pf+0w

; Try safety 2 or 3 to find violations with Allegro CL like the car of a
; non-nil atom.  (Note: safety 3 has failed in GCL due to a stack overflow.)
; Here are some numbers with Allegro CL, 8 processors with make -j 8:

; Safety 0:
; 11262.699u 291.730s 38:23.72 501.5%   0+0k 0+0io 16pf+0w

; Safety 2:
; 15588.206u 285.249s 54:19.72 486.9%   0+0k 0+0io 0pf+0w

; Safety 3:
; 16450.508u 284.473s 57:46.03 482.8%   0+0k 0+0io 0pf+0w

; Here are GCL numbers, again with make -j 8 (and using "fast builds").

; Safety 0:
; 10013.573u 566.983s 33:33.80 525.4%   0+0k 0+0io 0pf+0w

; Safety 2:
; [Note: community book
; books/clause-processors/SULFA/books/sat-tests/test-incremental.lisp
; ran out of space, saving perhaps a minute]
; 15637.669u 511.811s 52:02.78 517.1%   0+0k 0+0io 0pf+0w

                      ,(let ((our-safety
                              #-CLTL2
                              (if (boundp 'user::*acl2-safety*)
                                  (symbol-value 'user::*acl2-safety*)
                                nil)
                              #+CLTL2
                              (if (boundp 'common-lisp-user::*acl2-safety*)
                                  (symbol-value 'common-lisp-user::*acl2-safety*)
                                nil)))
                         (if our-safety
                             (progn (format t "Note: Setting SAFETY to ~s."
                                            our-safety)
                                    our-safety)
                           0))
                     )))

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;                               FILES
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; This is the file acl2.lisp, the first source file for ACL2.  The names of the
; other ACL2 source files are listed under *acl2-files*.

; All of ACL2 is written in Common Lisp and we expect that ACL2 will run in any
; Common Lisp except for those Common Lisps which fail the tests we execute
; upon loading this file, acl2.lisp.  With the exception of this and other
; initialiation files, files *-raw.lisp, and those constructs after the
; #-acl2-loop-only readtime conditional, ACL2 is written in the applicative
; Common Lisp for which ACL2 is a verification system.

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;                       READING CHARACTERS FROM FILES
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; Files may be viewed as sequences of bytes.  But Lisp can interpret these byte
; sequences as sequences of characters, depending on so-called character
; encodings.

; For example, through about March 2012 the default character encoding in CCL
; was ISO-8859-1, sometimes known as LATIN-1.  When this changed to UTF-8 a
; failure was reported when attempting to certify community book
; books/workshops/2006/cowles-gamboa-euclid/Euclid/fld-u-poly/coe-fld.lisp,
; apparently because of the following line, where the next-to-last character is
; actually an accented `o' sometimes known as
; #\LATIN_SMALL_LETTER_O_WITH_ACUTE, having code 243.  (The CLISP build fails
; if we use that character here, because at this point we have not yet made the
; adjustments to the character encoding that are done below!)

  ;;; Inverso de la primera operacion

; The accented `o' above is encoded as a single byte in LATIN-1 but as two
; bytes in UTF-8.

; Jared Davis then suggested that we explicitly specify ISO-8859-1, which might
; be slightly more efficient for reading files.  Note that GCL (non-Ansi, circa
; 2010 but probably later) only supports ISO-8859-1 as far as we can tell.  We
; follow Jared's suggestion below.  It seems that character encoding for
; reading from files is controlled differently from character encoding for ACL2
; reading from the terminal.  Jared also suggested setting the terminal
; encoding to ISO-8859-1 as well, and showed us how to do that in CCL.  We have
; been unable to figure out how to do that in some other host Lisps, but since
; files are typically shared between users and (of course) ACL2 reading from
; the terminal is not, the encoding for the terminal seems less important than
; for files.

; Even for files, we assert there is no soundness issue, in the sense that for
; maximum trust we expect each user to certify all books from scratch in a
; single environment.  But in practice, users share books (in particular,
; via the community books); so it is desirable to enforce uniform character
; encodings for files.

; The use of latin-1 could in principle cause problems for those whose default
; Emacs buffer encoding is utf-8.  That's in fact the case for us at UT CS, but
; not on one of our Mac laptops as of this writing (April 2012), probably
; because environment variable LANG is en_US.UTF-8 at UT CS.  But ACL2 users
; don't often save Lisp files with nonstandard characters.  If they have
; occasion to do so, they can evaluate

; (setq save-buffer-coding-system 'iso-8859-1)

; in Emacs buffers before saving into files.  This will happen automatically
; for users who load file emacs/emacs-acl2.el into their emacs sessions.

; At any rate, it seems best to standardize file encodings and leave it to
; individuals to cope with editing issues.

; Without further ado, we set the default encoding for files.  Below, we make
; some attempt to do so for the terminal.  We wrap all this into a function,
; because we have found that for sbcl, upon restart we lose the effect of the
; assignment below.  It seems safest then to do these same assignments at
; startup; see the call of the following function in acl2-default-restart.

(defun acl2-set-character-encoding ()

; We set the character encoding (see discussion above).

  #+allegro
; Alternatively, we could set the locale on the command line using -locale C:
; see http://www.franz.com/support/documentation/6.1/doc/iacl.htm#locales-1
; Note that (setq *default-external-format* :ISO-8859-1) is obsolete:
; http://www.franz.com/support/documentation/6.1/doc/iacl.htm#older-ef-compatibility-2
  (setq *locale* (find-locale "C"))

  #+ccl
  (setq ccl:*default-file-character-encoding* :iso-8859-1)

; #+clisp
; Set using -E ISO-8859-1 command-line option from save-exec.
; Note that the setting below for custom:*default-file-encoding* works for
; files, but we were unable to do the analogous thing successfully for
; custom:*terminal-encoding*, even when restricting that assignment to
; (interactive-stream-p *terminal-io*).

  #+cmu
  (setq *default-external-format* :iso-8859-1)

; #+gcl -- already iso-8859-1, it seems, and nothing we can do to change
;          the encoding anyhow

  #+lispworks
; This the default on our linux system, at least on both 32- and 64-bit,
; version 6.1.0.  But it doesn't seem to suffice; see
; our-lispworks-file-encoding below.
  (setq stream::*default-external-format* '(:LATIN-1 :EOL-STYLE :LF))

  #+sbcl
  (setq sb-impl::*default-external-format* :iso-8859-1)

; ;;;
; We have made only limited attempts to set the character encoding at the
; terminal, as discussed above.
; ;;;

; #+allegro
; Handled by *locale* setting above.  Formerly the following was later in
; this file; now we include it only as a comment.
;  #+(and allegro allegro-version>= (version>= 6 0))
;  (setf (stream-external-format *terminal-io*)
;        (excl::find-external-format
;         #+unix :latin1-base
;         #-unix :latin1))

; #+ccl
; For terminal, set using -K ISO-8859-1 command-line option from save-exec.

; #+cmucl -- Probably no setting is necessary.

; #+clisp -- Set using command-line option (see above).

; #+gcl -- There seems to be nothing we can do.

; #+lispworks -- No support seems to be available.

; #+sbcl
; We found that "unsetenv LANG" results in (stream-external-format
; *terminal-io*) being ascii at the terminal instead of utf-8; or, just start
; up sbcl like this to get ascii:

;   LANG=C ; XTERM_LOCALE=C ; sbcl

; But we don't know how to get latin-1.  We even tried each of these, but got
; ascii:

;   LANG=en_US.LATIN-1 ; XTERM_LOCALE=en_US.LATIN-1
;   LANG=en_US.ISO-8859-1 ; XTERM_LOCALE=en_US.ISO-8859-1

  )

; Here, we invoke the function defined above, so that a suitable character
; encoding is used during the build, not only when starting up a built image
; (which is why we call acl2-set-character-encoding in acl2-default-restart).
(acl2-set-character-encoding)

; We also do the following for clisp, since we set the encoding on the command
; line (see comment above) but we want to be able to read our own source files
; during the build.  See the comment in (defxdoc character-encoding ...) in
; community book books/system/doc/acl2-doc.lisp.
#+clisp
(setq custom:*default-file-encoding*
      (ext:make-encoding :charset 'charset:iso-8859-1

; The following is consistent with what we used to do in acl2-init.lisp; see
; the commented-out call there that sets custom:*default-file-encoding*.
; Unfortunately, according to http://www.clisp.org/impnotes/clhs-newline.html,
; this doesn't treat CR/LF as two characters when reading files -- for example,
; the file "foo.lisp" defined in a comment below for dealing with LispWorks
; provides (len *c*) = 3, not 4.

                         :line-terminator :unix))

; We seem to need to do more for LispWorks.  To see why, create a book
; "foo.lisp" as follows.
;
;   (in-package "ACL2")
;  (defconst *c*
;    "x
;  y")
;
; Next, if you have arranged in emacs to set save-buffer-coding-system
; 'iso-8859-1, as in emacs/emacs-acl2.el, turn that off and bring foo.lisp into
; a buffer; then add control-M at the end of every line; and finally, save the
; buffer, which will save the control-M at the end of every line and, in
; particular, in the middle of the string.  (And now restore your handling of
; save-buffer-coding-system.)  In a Lispworks image of ACL2, execute (ld
; "foo.lisp"), and you can evaluate (length *c*) to get 3, where 4 is expected
; because of the control-M.  We adopt here a solution found on the web at:
; http://www.lispworks.com/documentation/lw60/LW/html/lw-470.htm

#+lispworks
(defun our-file-encoding (pathname ef-spec buffer length)
  (system:merge-ef-specs ef-spec '(:LATIN-1 :EOL-STYLE :LF)))

#+lispworks
(setq system::*file-encoding-detection-algorithm*
      '(our-file-encoding))

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;                          LISP BUGS AND QUIRKS
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; See acl2-fns.lisp for a fix to user-homedir-pathname for some versions of
; GCL.

; To use ACL2 under LispWorks 3.2.0, execute the following to work around a
; bug.

; #+lispworks
; (setf (svref ccl::*funny-symbol-char-table* (char-code #\.)) t)

; Next, we correct *features* for Windows.

#+(and (or winnt win32 windows) (not mswindows))
(setq *features*
      (cons :mswindows *features*))

#+(and (or mswindows winnt) unix)
(setq *features*
      (delete :unix *features*
              :test
              (function (lambda (x y)
                          (equal (symbol-name x) (symbol-name y))))))

; Turn off automatic declaration of special variables, in particular since we
; do not want state declared special; see the comment above
; (eval '(setq state *the-live-state*)) in load-acl2.
#+cmu
(setq ext:*top-level-auto-declare* nil)

; Turn off compiler verbosity going to error stream, since even >& does not
; seem to redirect that stream to a file.
#+(or cmu sbcl)
(setq *compile-verbose* nil)
#+(or cmu sbcl)
(setq *compile-print* nil)

; Turn off gc verbosity (same reason as above).
#+cmu
(setq ext:*gc-verbose* nil)

#+ccl
(when (fboundp 'ccl::gc-verbose) ; not in OpenMCL 1.0 (CCL)
  (apply 'ccl::gc-verbose nil nil))

; See later in this file for with-warnings-suppressed (after we introduce and
; enter the ACL2 package).

; Avoid saving source file information, which could cause some slowdown and
; isn't typically exploited by ACL2 users.
#+ccl
(setq ccl::*record-source-file* nil)

; Camm Maguire has suggested, on 9/22/2013, the following forms, which allowed
; him to complete an ACL2 regresssion using 2.6.10pre.
#+gcl
(progn
  (si::allocate 'contiguous 15000 t)
  (si::allocate-sgc 'contiguous 15000 100000 10))

; The following avoids errors from extra right parentheses, but we leave it
; commented out since it doesn't seem important enough to merit messing around
; at this low level, and for just one Lisp.
; #+ccl
; (setq ccl::*ignore-extra-close-parenthesis* t)

; We have tried to build under ECL (Embeddable Common-Lisp), and with some
; modifications, we made progress -- except there appears (as of Sept. 2011) to
; be no good way for us to save an executable image.  Specifically, it appears
; that c:build-program not will suffice for saving state (properties etc.) --
; it's just for saving specified .o files.  (This impression seems to be
; confirmed at http://stackoverflow.com/questions/7686246/saving-lisp-state .)

; Here we document steps to take towards possibly porting to ECL in the future.

; If state-global-let* expansion causes an error due to excessive code blow-up,
; then consider replacing its definition by placing the following after
; state-free-global-let*.  HOWEVER, first think about whether this is right; we
; haven't thought through the effect of mixing a stack of let*-bindings of
; state global variables with the acl2-unwind-protect mechanism.  Also,
; comments are omitted here; be sure to restore them.

;;; (defmacro state-global-let*-logical (bindings body)
;;;   (declare (xargs :guard (and (state-global-let*-bindings-p bindings)
;;;                               (no-duplicatesp-equal (strip-cars bindings)))))
;;;
;;;   `(let ((state-global-let*-cleanup-lst
;;;           (list ,@(state-global-let*-get-globals bindings))))
;;;      ,@(and (null bindings)
;;;             '((declare (ignore state-global-let*-cleanup-lst))))
;;;      (acl2-unwind-protect
;;;       "state-global-let*"
;;;       (pprogn ,@(state-global-let*-put-globals bindings)
;;;               (check-vars-not-free (state-global-let*-cleanup-lst) ,body))
;;;       (pprogn
;;;        ,@(state-global-let*-cleanup bindings 0)
;;;        state)
;;;       (pprogn
;;;        ,@(state-global-let*-cleanup bindings 0)
;;;        state))))
;;;
;;; #-acl2-loop-only
;;; (defmacro enforce-live-state-p (form)
;;;
;;; ; Note that STATE is intended to be lexically bound at the point where this
;;; ; macro is called.
;;;
;;;   `(progn (when (not (live-state-p state)) ; (er hard! ...)
;;;             (let ((*hard-error-returns-nilp* nil))
;;;               (illegal 'enforce-live-state-p
;;;                        "The state was expected to be live in the context of ~
;;;                         an evaluation of the form:~|~x0"
;;;                        (list (cons #\0 ',form)))))
;;;           ,form))
;;;
;;; (defmacro state-global-let* (bindings body)
;;;   (cond #-acl2-loop-only
;;;         ((and (symbol-doublet-listp bindings)
;;;               (not (assoc-eq 'acl2-raw-mode-p bindings)))
;;;
;;; ; The test above guarantees that we merely have bindings of state globals.  A
;;; ; triple requires cleanup using a setter function.  Also we avoid giving this
;;; ; simple treatment to 'acl2-raw-mode-p because the semantics of
;;; ; state-global-let* are to call f-put-global, which has side effects in the
;;; ; case of 'acl2-raw-mode-p.
;;;
;;;          `(enforce-live-state-p
;;;            (warn-about-parallelism-hazard
;;;             '(state-global-let* ,bindings ,body)
;;;             (state-free-global-let* ,bindings ,body))))
;;;         (t `(state-global-let*-logical ,bindings ,body))))

; Also, place the following forms in file acl2-fns.lisp, just above qfuncall
; (but there may be better ways to do this).

;;; ; The following is in acl2.lisp, but seems to be needed here as well.
;;; #+ecl
;;; (ext:package-lock "COMMON-LISP" nil)
;;;
;;; Similarly in acl2.lisp, just before handling of package-lock on
;;; "COMMON-LISP" for clisp:
;;;
;;; #+ecl
;;; (ext:package-lock "COMMON-LISP" nil)

; Finally, consider these additional notes.

;;; We need (require "cmp") if we're to use c:build-program.

;;; Special-form-or-op-p: treat ecl like sbcl.

;;; System-call: treat ecl like akcl (actually replace #+akcl by #+(or akcl
;;; ecl)).

;;; Initialize-state-globals: treat ecl just like lispworks.

;;; Where we have the binding (compiler:*suppress-compiler-notes* t) for akcl,
;;; perhaps include the binding (*compile-verbose* t) for ecl.

;;; Modify exit-lisp to treat ecl like akcl, except using ext::quit instead of
;;; lisp::bye.

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;                              PACKAGES
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; We never intend that this file should be compiled, and hence we do
; not need to obey the CLTL1 strictures about putting all IN-PACKAGE
; forms near the front.

(let ((lisp-pkg (find-package "LISP")))
  (if lisp-pkg
      (let ((cl-pkg (find-package "COMMON-LISP")))
        (cond
         ((and cl-pkg (eq cl-pkg lisp-pkg))

; Then all is well.

          )
         #+(or cmu (and gcl cltl2))

; Starting with CMUCL 19a, lisp-pkg and cl-pkg are no longer the same.  We view
; CMUCL as CLTL2; see (push :CLTL2 *features*) above, noting that :ANSI-CL is
; in *features*.  So in this case, we simply ignore lisp-pkg.  Probably we can
; do the same for most other lisps, and in fact we do so for ANSI GCL as well.
; However, non-ANSI GCL is handled differently, since the "LISP" package is
; populated there but the "COMMON-LISP" appears to be largely irrelevant.

         (t nil)
         #-(or cmu (and gcl cltl2))
         (t
          (when cl-pkg ; but by the test above, cl-pkg is not lisp-pkg
            #-gcl ; not non-ANSI GCL

; Perhaps we can just add the present lisp to the case for #+(or cmu (and gcl
; cltl2)), above.

            (error "This Lisp is unsuitable for ACL2, because the ~
                    COMMON-LISP~% package is defined but is not the LISP ~
                    package.")
            #+gcl ; non-ANSI GCL

; Early versions of GCL 2.4.3/2.5.0 had a "COMMON-LISP" package that was
; initially populated only with LISP::T and LISP::NIL.  It seems safe to move
; any GCL COMMON-LISP package out of the way before we make "COMMON-LISP" a
; nickname for "LISP".

            (rename-package "COMMON-LISP" "COMMON-LISP-renamed"))
          (let ((old-name (package-name lisp-pkg)) ; reuse old name, nicknames
                (old-nicknames (package-nicknames lisp-pkg)))
            (rename-package "LISP"
                            old-name
                            (cons "COMMON-LISP" old-nicknames))))))))

(eval-when #-cltl2 (compile)
           #+cltl2 (:compile-toplevel)
           (error "The file acl2.lisp should never be compiled."))

(dolist
 (p (list-all-packages))
 (cond ((equal 4 (string< "ACL2" (package-name p)))
        (format t
                "~%~%Warning:  There is already a package with the ~
                 name ~a. ~%The ACL2 implementation depends upon ~
                 having complete knowledge of ~%and control over any ~
                 packge whose name begins with the ~%four letters ``ACL2'', ~
                 so ACL2 may not work in this Lisp." (package-name p))
        (cond ((package-use-list p)
               (format t "~%~%Warning:  The package with name ~a ~
                   USES the packages in the list ~a.  ACL2 will not work ~
                   in state of affairs."
                       (package-name p) (package-use-list p)))))))

(or (find-package "ACL2")
    (make-package "ACL2" :use nil))

; The definition of defconst appears just below because we use it
; early in axioms.lisp.  But first, we define the constant
; *the-live-state* because it is used below in the definition of
; defconst and cmulisp warns if we use it before it has been defined.

; And, in order to define *the-live-state* we need the ACL2_INVISIBLE
; package, which we define here.  This package is used for a few odd
; objects that are to be hidden from the ACL2 user.  Symbols in this
; package having names that start with "HONS" are reserved for the
; hons/memoization implementation.

(let ((inv "ACL2_INVISIBLE"))
  (or (find-package inv)
      (make-package inv :use nil)))

; LispWorks has a package named "DEF", and that name conflicts with an ACL2
; package of that name introduced in community book books/coi/.  We deal with
; that issue here.  Thanks to Martin Simmons for providing this code in place
; of the original code, which instead invoked (rename-package "DEF"
; "DEF-FROM-LW-RENAMED").
#+lispworks
(when (find-package "DEF")
  (unless (equal (package-name "DEF") "DSPEC")
    (error "Expected LispWorks DEF package to be called DSPEC"))
  (rename-package "DSPEC" "DSPEC"
                  (remove "DEF" (package-nicknames "DSPEC") :test 'equal)))

; The value of the constant *the-live-state* is actually just a
; symbol, but that symbol is the unique representative of the one
; single active, global, real-time state of ACL2, which is represented
; both in real-time (e.g., characters not yet typed) and also rather
; efficiently, using typical von Neumann storage techniques.
; Functions that wish to access the global state must have received
; *the-live-state* as an arg.  Functions that modify this global state
; must receive it as an arg and return it.

(defconstant acl2::*the-live-state* 'acl2_invisible::|The Live State Itself|)

; (Defconst *var* term) is essentially just (defparameter *var* term).  But
; things are made complicated by the desire not to evaluate term unnecessarily.
; Suppose (defconst *var* term) appears in a certified book, say "book.lisp".
; Then when the events in "book.lisp" are processed, a CLTL-COMMAND is executed
; which causes (defconst *var* term) to be evaluated in the underlying raw
; lisp, assigning a value to *var* in Lisp.  But now suppose that the compiled
; file for another book, say "book2.o", is loaded on behalf of include-book.
; If defconst were just defparameter, term would be evaluated again (yielding a
; presumably EQUAL value), which is an unfortunate waste of computation.

; We avoid this in the code below by saving, on the raw Lisp property list of
; *var*, under the key 'REDUNDANT-RAW-LISP-DISCRIMINATOR, a triple, (DEFCONST
; term . val), giving the term we evaluated to produce the setting of the var
; and the value, val, produced.  When a defconst (defconst *var* term) is
; evaluated, we ask whether *var* has a value.  If not, we just proceed
; normally.  But if it has a value, we insist that the discriminator be present
; and appropriate or else we cause a hard error.  By appropriate in this case
; we mean that it be a DEFCONST such that the value produced last time is EQ to
; the current setting of *var*, and moreover, either the old and new DEFCONST
; have the same (EQUAL) term to evaluate or else the new value is EQUAL to the
; old.  The EQ check is meant to provide some safety if the user has manually
; set *var* in raw lisp, as with setq, since the last defconst to it.

; We anticipate that redundant-raw-lisp-discriminator may be used by the
; support functions for other events, e.g., defstobj.  So the value of that
; property is not necessarily (DEFCONST term . val) but may depend on the kind
; of event that stored it.  The reason we put the discriminator on the raw lisp
; property list of *var* rather than looking in the world of *the-live-state*,
; where we could in principle find an event-landmark, is that we execute many
; defconsts in axioms.lisp, before the world processing functions, like
; getprop, are defined and so the defmacro below must expand to code that can
; be executed in a partially booted ACL2.

(defvar acl2::*compiling-certified-file* nil)

(defun acl2::defconst-redeclare-error (name)
  (let ((stk (symbol-value 'acl2::*load-compiled-stack*)))
    (cond (stk
           (error
            "Illegal attempt to redeclare the constant ~s.~%~
             The problem appears to be that you are including a book,~%~
             ~2T~a,~%~
             that attempts to give a definition of this constant that~%~
             is incompatible with its existing definition.  The ~%~
             discrepancy is being discovered while loading that book's~%~
             compiled (or expansion) file~:[, as the last such load for~%~
             the following nested sequence of included books (outermost~%~
             to innermost):~%~{  ~a~%~}~;.~]"
            name
            (caar stk)
            (null (cdr stk))
            (reverse (loop for x in stk collect (car x)))))
          (t
           (error "Illegal attempt to redeclare the constant ~s."
                  name)))))

(defparameter acl2::*safe-mode-verified-p*

; This global may be bound to t when we are evaluating a form that we know will
; not lead to an ill-guarded call in raw Lisp (say, because the form was
; previously evaluated by ACL2 in safe-mode).  See also the comment in
; ec-call1-raw.

  nil)

(defmacro acl2::defconst (name term &rest rst)
  (declare (ignore rst)) ; e.g., documentation
  (let ((disc (gensym)))
    `(defparameter ,name
       (let ((acl2::*safe-mode-verified-p* t))
         (cond
          ((boundp ',name)
           (cond
            (acl2::*compiling-certified-file*

; We avoid the potentially expensive redundancy check done below, which is
; legitimate since we are simply loading a compiled file at the end of
; certify-book.  To see how important this optimization can be, try removing it
; before certifying the following book (thanks to Sol Swords for this
; example).

; (in-package "ACL2")
; (defun tree (n)
;    (if (zp n)
;        nil
;      (let ((sub (tree (1- n))))
;        (cons sub sub))))
; (defmacro deftree (name n)
;    `(defconst ,name ',(tree n)))
; (deftree *big* 35)

             (symbol-value ',name))
            (t

; Even though ',name is bound, we refer to its value with
; (symbol-value ',name) rather than simply an in-line ,name, to avoid
; compiler warnings.

             (let ((,disc (get ',name
                               'acl2::redundant-raw-lisp-discriminator)))
               (cond
                ((and (consp ,disc)
                      (eq (car ,disc) 'acl2::defconst))
                 (assert (consp (cdr ,disc)))
                 (cond
                  ((and (eq (cdr (cdr ,disc)) (symbol-value ',name))
                        (or (equal (car (cdr ,disc)) ',term)
                            (equal (cdr (cdr ,disc)) ,term)))
                   (symbol-value ',name))
                  (t (acl2::defconst-redeclare-error ',name))))
                ((acl2::raw-mode-p acl2::*the-live-state*)

; In this case we allow redeclaration of the constant; this is, after all, raw
; mode, where there are no guarantees.

                 ,term)
                (t
                 (acl2::defconst-redeclare-error ',name)))))))

; If ',name is not bound, we must evaluate ,term.  Note that we do so
; outside of all local bindings, so as not to disturb variables in
; term.  (There should be none -- this is supposed to be a constant,
; but you never know!)  We may want to enforce that this code is only executed
; during the boot-strap; see the Essay on Guard Checking.

          (t (let* ((val ,term)
                    (d (list* 'acl2::defconst ',term val)))
               (setf (get ',name 'acl2::redundant-raw-lisp-discriminator)
                     d)
               (cdr (cdr d)))))))))

; We now get our imports for package ACL2, putting them into the
; variable acl2::*common-lisp-symbols-from-main-lisp-package*.

; We use different variables for common-lisp-symbols-from-main-lisp-package*,
; *acl2-version*, and *acl2-files*, in order to avoid compiler warnings for
; redefined variables.  Actually, *acl2-version* no longer exists starting with
; Version_2.9.1, but we keep the name below nonetheless.

(defvar acl2::*copy-of-common-lisp-symbols-from-main-lisp-package*)
(defvar acl2::*copy-of-common-lisp-specials-and-constants*)
(defvar acl2::*copy-of-acl2-version*)

(defconstant acl2::*acl2-files*

; The order of these files determines compilation order.

; Note regarding backups at UT CS:

; Even though it's convenient to refer to our UT CS development directory as
; /projects/acl2/devel/, we'll need to get backups from
; /v/filer4b/v11q002/acl2space/acl2/.snapshot/*/devel, not from
; /projects/acl2/.snapshot/*/devel.  The latter is just a soft link to
; /projects/acl2/devel, i.e., to /v/filer4b/v11q002/acl2space/acl2/devel.

  '(
    #+acl2-par "multi-threading-raw"
    #+hons "serialize-raw"
    "axioms"
    "memoize"   ; but only get special under-the-hood treatment with #+hons
    "hons"      ; but only get special under-the-hood treatment with #+hons
    "serialize" ; but only get special under-the-hood treatment with #+hons
    "basis"
    "parallel" ; but only get special under-the-hood treatment with #+acl2-par
    #+acl2-par "futures-raw"
    #+acl2-par "parallel-raw"
    #+hons "hons-raw"
    #+hons "memoize-raw"
    "translate"
    "type-set-a"
    "linear-a"
    "type-set-b"
    "linear-b"
    "non-linear"
    "tau"
    "rewrite"
    "simplify"
    "bdd"
    "other-processes"
    "induct"
    "proof-checker-pkg"
    "doc"
    "history-management"
    "prove"
    "defuns"
    "proof-checker-a"
    "defthm"
    "other-events"
    "ld"
    "proof-checker-b"
    "interface-raw"
    "defpkgs"
    "boot-strap-pass-2" ; at the end so that it is compiled last
    )
  "*acl2-files* is the list of all the files necessary to build
ACL2 from scratch.")

; CLISP version 2.30 (along with perhaps other versions) locks the LISP
; package.  That causes problems when we try to read the second form in
; axioms.lisp, which defines
; acl2::*common-lisp-symbols-from-main-lisp-package*, when CLISP tries to read
; some of the symbols in that list (e.g., CALL-METHOD) into the COMMON-LISP
; package.  (Specifically, INTERN breaks.)  We use eval below to avoid any
; chance (we hope) of getting an "undefined function" warning with earlier
; CLISP versions.

#+clisp
(if (fboundp 'package-lock)
    (eval '(setf (package-lock "LISP") nil)))

; CLISP version 2.33 defines the symbol custom::*suppress-check-redefinition*,
; but version 2.30 does not.  We temporarily unlock that package if necessary
; in order to define this variable.  While we are at it we make the variable
; special, in order to avoid potential compiler warnings in 2.30 when we bind
; it but never use it.

#+clisp
(if (not (find-symbol "*SUPPRESS-CHECK-REDEFINITION*" "CUSTOM"))
    (if (fboundp 'package-lock)
        (let ((old-lock (package-lock "CUSTOM")))
          (eval '(setf (package-lock "CUSTOM") nil))
          (let ((sym (intern "*SUPPRESS-CHECK-REDEFINITION*" "CUSTOM")))
            (eval `(defvar ,sym nil)))
          (eval `(setf (package-lock "CUSTOM") ',old-lock)))
      (let ((sym (intern "*SUPPRESS-CHECK-REDEFINITION*" "CUSTOM")))
        (eval `(defvar ,sym nil)))))

(with-open-file
 (fl "axioms.lisp" :direction :input)

;  Get into the main lisp package in order to read in
;  *common-lisp-symbols-from-main-lisp-package*.

 (let ((*package* (find-package #-CLTL2 "LISP" #+CLTL2 "COMMON-LISP")))

;  Skip the in-package

   (read fl)

;  Do the defconst for *common-lisp-symbols-from-main-lisp-package*.

   (setq acl2::*copy-of-common-lisp-symbols-from-main-lisp-package*
         (eval (caddr (read fl))))
   (import acl2::*copy-of-common-lisp-symbols-from-main-lisp-package* "ACL2")

   (setq acl2::*copy-of-acl2-version*
;  Keep this in sync with the value of acl2-version in *initial-global-table*.
         (concatenate 'string
                      "ACL2 Version 6.5"
                      #+non-standard-analysis
                      "(r)"
                      #+(and mcl (not ccl))
                      "(mcl)"))

;  Do the defconst for *common-lisp-specials-and-constants*.

   (setq acl2::*copy-of-common-lisp-specials-and-constants*
         (eval (caddr (read fl))))))

(in-package "ACL2")

(defparameter *compiled-file-extension*

; Note that for the community books, files books/Makefile-generic,
; books/Makefile-subdirs, and books/Makefile-psubdirs all deal with compiled
; file extensions.  Thanks to Gary Byers for suggested the following approach
; for #+ansi-cl, which however appears to work for all Lisps supported as of
; early 2006.

  (pathname-type (compile-file-pathname "foo.lisp")))

(defmacro initialize-state-globals ()
  (let ((acl2-compiler-enabled-var
         #+cltl2 'common-lisp-user::*acl2-compiler-enabled*
         #-cltl2 'user::*acl2-compiler-enabled*))
    `(progn (dolist (pair *initial-global-table*)
              (f-put-global (car pair) (cdr pair) *the-live-state*))
            (f-put-global 'acl2-sources-dir (our-pwd) *the-live-state*)
            (f-put-global 'iprint-ar
                          (compress1 'iprint-ar
                                     (f-get-global 'iprint-ar *the-live-state*))
                          *the-live-state*)
            (f-put-global 'compiler-enabled

; Either t, nil, or :books is fine here.  For example, it might be reasonable
; to initialize to (not *suppress-compile-build-time*).  But for now we enable
; compilation of books for all Lisps.

                          (cond ((boundp ',acl2-compiler-enabled-var)
                                 (or (member ,acl2-compiler-enabled-var
                                             '(t nil :books))
                                     (error "Illegal value for ~
                                             user::*acl2-compiler-enabled*, ~s"
                                            ,acl2-compiler-enabled-var))
                                 ,acl2-compiler-enabled-var)
                                (t

; Warning: Keep the following "compile on the fly" readtime conditional in sync
; with the one in acl2-compile-file.

                                 #+(or ccl sbcl)
                                 :books
                                 #-(or ccl sbcl)
                                 t))
                          *the-live-state*)
            (f-put-global
             'host-lisp
             ,(let () ; such empty binding has avoided errors in  GCL 2.6.7
                #+gcl :gcl
                #+ccl :ccl
                #+sbcl :sbcl
                #+allegro :allegro
                #+clisp :clisp
                #+cmu :cmu
                #+lispworks :lispworks
                #-(or gcl ccl sbcl allegro clisp cmu lispworks)
                (error
                 "Error detected in initialize-state-globals: ~%~
                  The underlying host Lisp appears not to support ACL2. ~%~
                  Contact the ACL2 implementors to request such support."))
             *the-live-state*)
            (f-put-global
             'compiled-file-extension
             ,*compiled-file-extension*
             *the-live-state*)
            #+unix
            (f-put-global 'tmp-dir "/tmp" *the-live-state*)
            #+gcl ; for every OS, including Windows (thanks to Camm Maguire)
            (when (boundp 'si::*tmp-dir*)
              (f-put-global 'tmp-dir si::*tmp-dir* *the-live-state*))
            #-acl2-mv-as-values
            (f-put-global 'raw-arity-alist *initial-raw-arity-alist*
                          *the-live-state*))))

(defconstant *suppress-compile-build-time*

; This flag controls whether explicit calls to the compiler during the build,
; that is via compile and compile-file, are suppressed.  The "interpreters" of
; SBCL and CCL compile on-the-fly, so a nice optimization is for us to
; avoid calling the compiler ourselves.

  #+(or sbcl ccl) ; these compile on-the-fly
  t
  #-(or sbcl ccl)
  nil)

(defparameter *global-package-prefix* "ACL2_GLOBAL_")

(defparameter *1*-package-prefix* "ACL2_*1*_")

(defun make-global-package (x)
  (let* ((n (concatenate 'string *global-package-prefix* x))
         (p (find-package n)))
    (cond (p
           (do-symbols (sym p)
                       (makunbound sym)))
          (t (make-package n :use nil)))))

(defun make-*1*-package (x)
  (let* ((n (concatenate 'string *1*-package-prefix* x)))

; Unlike make-global-package, here we really don't have to worry about bound
; (or fbound) symbols.  Presumably ``bound'' is irrelevant, and ``fbound'' is
; taken care of by our undoing mechanisms.

    (make-package n :use nil)))

(or (find-package "ACL2-INPUT-CHANNEL")
    (make-package "ACL2-INPUT-CHANNEL" :use nil))

(or (find-package "ACL2-OUTPUT-CHANNEL")
    (make-package "ACL2-OUTPUT-CHANNEL" :use nil))


; Next we define the initial global and *1* packages.

(defconstant *main-lisp-package*
  (find-package "COMMON-LISP"))

(defconstant *main-lisp-package-name-raw*
; Keep this in sync with *main-lisp-package-name*.
  "COMMON-LISP")

; Keep the following in sync with *main-lisp-package-name*.
(make-global-package *main-lisp-package-name-raw*)
(make-global-package "KEYWORD")
(make-global-package "ACL2")
(make-global-package "ACL2-INPUT-CHANNEL")
(make-global-package "ACL2-OUTPUT-CHANNEL")

; Keep the following in sync with *main-lisp-package-name*.
(make-*1*-package *main-lisp-package-name-raw*)
; Functions cannot be defined in the keyword package, so we do not do so.
;  (make-*1*-package "KEYWORD")
(make-*1*-package "ACL2")
(make-*1*-package "ACL2-INPUT-CHANNEL")
(make-*1*-package "ACL2-OUTPUT-CHANNEL")

; Common Lisp does not require that the symbol-package of the basic
; Lisp symbols be the basic LISP or COMMON-LISP package, but merely
; that those symbols be exported from that package.

(defparameter acl2::*initial-lisp-symbol-mark*
  'acl2_invisible::initial-lisp-symbol-mark)

(let ((cl-pkg-name *main-lisp-package-name-raw*))
  (dolist (sym *copy-of-common-lisp-symbols-from-main-lisp-package*)

; We support the Invariant on Symbols in the Common Lisp Package.  See the long
; comment about this invariant in the symbolp case of bad-lisp-objectp.

    (setf (get sym *initial-lisp-symbol-mark*) cl-pkg-name)))

(defconstant *acl2-package* (find-package "ACL2"))

(dolist (x *features*)
        (cond ((or (equal "AKCL-SET-MV"
                          (symbol-name x))
                   (equal "ACL2-LOOP-ONLY"
                          (symbol-name x))
                   (equal "ACL2-METERING"
                          (symbol-name x)))
               (format t "~%~%Warning:  This Common Lisp may be ~
                          unsuitable for ACL2 because a symbol with~
                          ~%the name \"ACL2-LOOP-ONLY\", ~
                          \"AKCL-SET-MV\" or \"ACL2-METERING\" is ~
                          a member of *FEATURES*."))))

#+akcl
(if (fboundp 'si::set-mv)
    (push :akcl-set-mv *features*)
  (error "Use a version of ACKL after 206"))

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;                                CHECKS
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; See acl2-check.lisp for more checks.

; The following macro turns off some style warnings.  It is defined here
; instead of the "LISP BUGS AND QUIRKS" section because we want to define this
; in the ACL2 package.

(defmacro with-redefinition-suppressed (&rest forms)

; This macro is equivalent to progn for SBCL and CMUCL, where we typically
; suppress more warnings anyhow; see with-warnings-suppressed.

  `(let (#+lispworks
         (compiler::*redefinition-action* :QUIET)
         #+allegro
         (excl:*redefinition-warnings* nil)
         #+clisp
         (custom::*suppress-check-redefinition*

; This binding may not suffice during the build.  Below is a comment that is
; probably old as of this writing (Oct. 9, 2011).

; Unfortunately, the above binding seems to be ignored when in the scope of
; with-compilation-unit, so we get redefinition warnings from clisp during the
; build.  Here is an example that exhibits that behavior CLISP 2.44.1 (even
; without ACL2); and the same problem occurs if we switch the order of
; with-compilation-unit and the binding of *suppress-check-redefinition*.

;   (common-lisp::with-compilation-unit
;    ()
;    (let ((custom::*suppress-check-redefinition* t))
;      (dolist (name '("foo" "bar"))
;        (let ((source (make-pathname :name name :type "lisp")))
;          (load source)
;          (progn
;            (compile-file source)
;            (load (make-pathname :name name :type "fas")))))))

          t)
         #+ccl
         (ccl::*compiler-warn-on-duplicate-definitions* nil))
     ,@forms))

(defmacro with-warnings-suppressed (&rest forms)

; See also the handler-bind call in init.lisp.  Thanks to Juho Snellman for his
; assistance with handler-bind.

; We are happy to turn off redefinition warnings because we trust that
; functions such as add-trip know what they are doing.  Without this code, for
; example, :oops can cause many screens of such warnings.

  #+sbcl

; Warning: We turn off all warnings in SBCL because they are so noisy.  We
; eliminate most of them in the proclaim form earlier in this file, using
; (sb-ext:inhibit-warnings 3), because without that the following doesn't work;
; just start up sbcl and submit the following form without the leading
; backquote and replacing ,@forms by (defun f (x y) x).

; `(handler-bind
;   ((warning       (lambda (c)
;                     (declare (ignore c))
;                     (invoke-restart 'muffle-warning)))
;    (style-warning (lambda (c)
;                     (declare (ignore c))
;                     (invoke-restart 'muffle-warning))))
;   ,@forms)

; However, even with the above proclaim form we still get redefinition
; warnings.  So we wrap the following handler-bind around forms in order to
; eliminate redefinition warnings as well.

  `(handler-bind
    ((warning (lambda (c)
                (declare (ignore c))
                (invoke-restart 'muffle-warning))))
    ,@forms)

  #+cmu
  `(progn (setq ext:*gc-verbose* nil)
          (handler-bind
           ((warning (lambda (c)
                       (declare (ignore c))
                       (invoke-restart 'muffle-warning))))
           ,@forms))

  #-(or sbcl cmu)
  `(with-redefinition-suppressed ,@forms))

(defmacro with-more-warnings-suppressed (&rest forms)

; We add additional warning suppression beyond what is provided by
; with-warnings-suppressed.  Warning: We do not necessarily suppress all
; warnings that are suppressed by with-warnings-suppressed, so you will
; probably want to call this macro in a context underneath
; with-warnings-suppressed.

; The handler-bind form given in with-warnings-suppressed for sbcl and cmucl is
; sufficient; we do not need anything further here.  But even with the addition
; of style-warnings (as commented there), that form doesn't seem to work for
; CCL, Allegro CL, Lispworks, or CLISP.  So we bind some globals instead.

  #+lispworks
  `(let ((compiler::*compiler-warnings* nil))
     ,@forms)

  #+allegro
  `(handler-bind
    ((style-warning (lambda (c)
                      (declare (ignore c))
                      (invoke-restart 'muffle-warning))))
    ,@forms)

  #+clisp
  `(let ((*compile-verbose* nil))
     ,@forms)

  #+ccl
  `(let ((ccl::*suppress-compiler-warnings* t))
     ,@forms)

  #-(or lispworks allegro clisp ccl)
  (if (cdr forms) `(progn ,@forms) (car forms)))

(defmacro with-suppression (&rest forms)

; Since "COMMON-LISP" is a package known to ACL2, a user should have permission
; to type 'common-lisp::foo (say) and not get a reader error due to a package
; lock.  This macro suppresses the package lock on "COMMON-LISP" for Lisps
; where we know this is necessary, and also inhibits some warnings.

  #-(or sbcl clisp) `(with-warnings-suppressed ,@forms)
  #+sbcl `(sb-ext:with-unlocked-packages
           ("COMMON-LISP")
           (with-warnings-suppressed ,@forms))
  #+clisp `(ext:without-package-lock
            ("COMMON-LISP")
            (with-warnings-suppressed ,@forms)))

(defconstant acl2::*acl2-status-file*
  (make-pathname :name "acl2-status"
                 :type "txt"))

(defun acl2::check-suitability-for-acl2 ()

; As of version 18a, cmulisp spews gc messages to the terminal even when
; standard and error output are redirected.  So we turn them off.

  (with-warnings-suppressed
   (or (not (probe-file *acl2-status-file*))
       (delete-file *acl2-status-file*))
   (load "acl2-check.lisp")
   (with-open-file (str *acl2-status-file*
                        :direction :output)
                   (format str
                           "~s"
                           :checked))
   t))

(defun note-compile-ok ()
  (progn (or (not (probe-file *acl2-status-file*))
             (delete-file *acl2-status-file*))
         (with-open-file (str *acl2-status-file*
                              :direction :output)
                         (format str
                                 "~s"
                                 :compiled))))

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;                       COMPILING and LOADING, PART 1
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; To compile ACL2, invoke (load "acl2.lisp") and then invoke
; (acl2::compile-acl2).  Having compiled ACL2, to build ACL2, invoke
; (load "acl2.lisp") and then invoke (acl2::load-acl2).  To run ACL2
; verified code, one may either load all of ACL2 as above, or
; alternatively, having complied ACL2, invoke (load "acl2.lisp") and
; invoke (acl2::load-acl2-execution-environment).  The top-level user
; functions for ACL2 are in package "ACL2", so invoke (in-package
; "ACL2") to obviate typing package names.

; NOTE:  In order to compile ACL2, checks must first be run on the suitability
; of the underlying Common Lisp implementation, by executing
; (check-suitability-for-acl2).  If the Common Lisp is suitable, this form will
; write the file acl2-status.txt with the symbol :CHECKED.  Successful
; compilation should write out that same file with the symbol :COMPILED.

; Compiling is a no-op if *suppress-compile-build-time* is non-nil, but we
; still write :COMPILED as indicated above.

(defvar *lisp-extension* "lisp")

#+sbcl ; turn off compiler notes (noisy)
(declaim (sb-ext:muffle-conditions sb-ext:compiler-note))

; The Allegro CL documentation tells us that the following variable is
; "Initially true only if speed is 3 and safety is 0", and that it allows the
; compiler to assume that the sum of two declared fixnums is a fixnum, etc.  We
; hope that by setting this variable to nil we avoid seeing occasional checksum
; errors during include-book when certifying the regression suite.
#+allegro
(setf comp:declared-fixnums-remain-fixnums-switch nil)

; Previous value for the above:
; (eval (read-from-string "
;   (SETQ COMPILER::DECLARED-FIXNUMS-REMAIN-FIXNUMS-SWITCH
;         #'(LAMBDA (X Y Z #+(VERSION>= 4 1) D) NIL)) "))

; The following appears to allow tail recursion elimination for functions
; locally defined using LABELS.  This is important for efficiency since we
; use LABELS in defining executable counterparts (see e.g. oneify-cltl-code).
#+allegro
(setq compiler:tail-call-non-self-merge-switch t)

; LispWorks Version 4.2.0 has issued the following complaint during compilation
; until the next form was executed:
; **++++ Error in NTH-UPDATE-REWRITER1:
;   Function size 73824 is too large.
; But even with the next form, we have seen the following:
; **++++ Error in XTRANS-EVAL:
;   Function size 67910 is too large.
; This problem has disappeared with LispWorks 6.0.  But it seems reasonable to
; leave the following in place.
#+lispworks
(cl-user::toggle-source-debugging nil)

(defmacro our-with-compilation-unit (form)

; In fact, with-compilation-unit is only defined in dpANS, not CLtL2.  But MCL
; and CCL do seem to support it, so we allow it with #+cltl2 and #+ccl.
; We also have noticed that while :CLTL2 belongs to *features* in Version
; :CMU17 (presumably 17f), it does not belong in a cmucl version 18d that we
; obtained for Linux, even though with-compilation-unit continues to be
; defined.

  #+cltl2
  `(common-lisp::with-compilation-unit
    ()
    ,form)
  #-cltl2
  form)

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;                           BASIC FUNCTIONS TO BE COMPILED
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;  Functions for proclaiming and for defining ACL2's Implementation of the
;  Backquote Readmacro are to be compiled, so we do not include them in the
;  present file.  Instead we put them in acl2-fns.lisp, after defining the
;  following constant.  (We could put this defconstant in acl2-fns.lisp, but
;  CLISP would warn unless we made it conditional on a (not (boundp ..))
;  check.  That sort of fix has gotten us into trouble with Allegro, so we take
;  the simpler solution of putting the defconstant in this file, which is
;  loaded only once (there is no compiled version of this file to load).

(defconstant *acl2-read-character-terminators*
  '(#\Tab #\Newline #\Page #\Space #\" #\' #\( #\) #\; #\` #\,))

(our-with-compilation-unit

; At one time we avoided recompiling and had the following code inside a COND:

;    ((and (probe-file object-file)
;          (<= (file-write-date "acl2-fns.lisp")
;              (file-write-date object-file)))
;     (load object-file))

; But for example, if we compile with Allegro under SunOS and then later build
; the system with Allegro under Linux, the same ".fasl" extension could fool us
; into thinking that recompilation is not necessary.

 (progn
   (load "acl2-fns.lisp") ;we like to load before compiling
   (let ((acl2-fns-compiled
          (make-pathname :name "acl2-fns"
                         :type *compiled-file-extension*)))
     (when (probe-file acl2-fns-compiled)
       (delete-file acl2-fns-compiled))
     (when (not *suppress-compile-build-time*)
       (compile-file "acl2-fns.lisp")

; Note that load-compiled is not used below, but on the other hand we are still
; using the original readtable here so that's not a problem.

       (load acl2-fns-compiled)))))

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;                           ACL2-READTABLE
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

(defparameter *acl2-readtable*
  (copy-readtable nil)
  "*acl2-readtable* is the readtable we use (a) to restrict the use
#. to cause evaluation during READing (b) and to define our own version
of backquote.")

(defparameter *host-readtable*
  (copy-readtable)
  "*host-readtable* is the original readtable provided by the host Lisp,
which is saved just in case it's needed later.")

(defun set-new-dispatch-macro-character (char subchar fn)

; This function currently causes an error when attempting to build ACL2(h) on
; top of CLISP, where (get-dispatch-macro-character #\# #\Y) evaluates to
; #<SYSTEM-FUNCTION SYSTEM::CLOSURE-READER>.  Here is a discussion of that
; issue.

; With some thought we might be able to avoid the special cases below for which
; char is #\# and subchar is, for example, #\Y -- i.e., smashing (in that
; example) which reader is invoked by #\Y.  We certainly have in mind our own
; semantics for ACL2 source files, to be read using *acl2-readtable*, while the
; host Lisp's semantics are expected for compiled files.  But consider files
; like .cert and @expansion.lsp files, i.e., files that may be written by the
; host Lisp (see the call of prin1 in print-object$-ser) but are read by ACL2.
; Perhaps the issue goes away if we are using the serialize reader and writer,
; as must be the case when we install a reader for #\Y.  We may think all this
; through when there is sufficient reason to do so.  For now, the only problem
; pertaining to our handling of dispatch macro characters is in the case of
; CLISP and ACL2(h), since #\Y is already defined in CLISP -- this function
; causes an error when attempting to build ACL2(h) on CLISP.  Since CLISP is
; much slower than the other six host Lisps that we support, and since ACL2(h)
; is optimized for CCL such that it is really only intended for CCL at this
; point (June 2013), we can live without CLISP support for ACL2(h).

  (let ((old (get-dispatch-macro-character char subchar)))
    (cond ((or (null old)
               (eql fn old)
               #+cmu

; This is really just a guess, but it's a pretty good one, as several values of
; subchar (for char equal to #\#) give this function, at least in our copies of
; CMU CL 19e and CMU CL 20D.

               (eq old (symbol-function 'LISP::DISPATCH-CHAR-ERROR))
               #+gcl

; For GCL, Camm Maguire has told us that he believes that it's safe for us to
; make this redefinition for these characters.

               (and (eql char #\#)
                    (member subchar '(#\@ #\! #\u #\Y #\Z)))
               #+allegro

; The #u reader has been defined in Allegro CL to invoke parse-uri.  It seems
; harmless to overwrite it (especially since we only smash #u in
; *acl2-readtable*).  David Margolies of Franz Inc. has kindly pointed us to
; the web page
; http://www.franz.com/support/documentation/8.1/doc/uri.htm#acl-implementation-1
; where we find this:

;   4. #u"..." is shorthand for (parse-uri "...") but if an existing #u
;   dispatch macro definition exists, it will not be overridden.

               (and (eql char #\#)
                    (member subchar '(#\u))))
           (set-dispatch-macro-character char subchar fn))
          (t (error "ACL2 cannot be built in this host Lisp, because ~%~
                     ~s is already defined, to be: ~s"
                    `(get-dispatch-macro-character ,char ,subchar)
                    old)))))

(defun define-sharp-dot ()
  (set-dispatch-macro-character
   #\#
   #\.
   #'sharp-dot-read))

(defun define-sharp-comma ()
  (set-dispatch-macro-character
   #\#
   #\,
   #'sharp-comma-read))

(defun define-sharp-atsign ()
  (set-new-dispatch-macro-character
   #\#
   #\@
   #'sharp-atsign-read))

(defun define-sharp-bang ()
  (set-new-dispatch-macro-character
   #\#
   #\!
   #'sharp-bang-read))

(defun define-sharp-u ()
  (set-new-dispatch-macro-character
   #\#
   #\u
   #'sharp-u-read))

(defvar *old-character-reader*
  (get-dispatch-macro-character #\# #\\))

(defun modify-acl2-readtable (do-all-changes)
  (let ((*readtable* *acl2-readtable*))

; Thanks to Jared Davis for contributing the code for #\Y and #\Z (see
; serialize-raw.lisp).  Note that p. 531 of CLtL2 specifies that #\Y and #\Z
; may be available to us (though we check this by using
; set-new-dispatch-macro-character).  Keep these two settings in sync with
; *reckless-acl2-readtable*.

    #+hons ; SBCL requires #+hons (same restriction as ser-hons-reader-macro)
    (set-new-dispatch-macro-character
     #\#
     #\Z
     'ser-hons-reader-macro)

    #+hons ; SBCL requires #+hons (same restriction as ser-cons-reader-macro)
    (set-new-dispatch-macro-character
     #\#
     #\Y
     'ser-cons-reader-macro)

; Backquote

    (set-macro-character
     #\`
     #'(lambda (stream char)
         (declare (ignore char))
         (let ((*backquote-counter* (1+ *backquote-counter*)))
           (backquote (read stream t nil t)))))

; Comma

    (set-macro-character
     #\,
     #'(lambda (stream char)
         (declare (ignore char))
         (let ((*backquote-counter* (1- *backquote-counter*)))
           (acl2-comma-reader stream))))

;  Restrict #.

    (when do-all-changes
      (define-sharp-dot)
      (define-sharp-comma)
      (define-sharp-atsign)
      (define-sharp-bang)
      (define-sharp-u))

;  Keep control of character reader.  However, we do not need to keep such
;  control when reading in a .fas file for CLISP, and in fact, the set-theory
;  book's use of (code-char 255) generates
;  #\LATIN_SMALL_LETTER_Y_WITH_DIAERESIS in set-theory.fas.  We see no reason
;  to restrict reading of such characters in .fas files.

    (when do-all-changes
      (set-dispatch-macro-character
       #\#
       #\\
       #'acl2-character-reader))))

(eval-when
 #-cltl2
 (load eval compile)
 #+cltl2
 (:load-toplevel :execute :compile-toplevel)
 #-clisp
 (modify-acl2-readtable t)
 #+clisp
 (progn (modify-acl2-readtable nil)
        (defparameter *acl2-readtable-clisp-fas*
          (copy-readtable *acl2-readtable*))
        (let ((*readtable* *acl2-readtable*))
          (define-sharp-dot)
          (define-sharp-comma)
          (define-sharp-atsign)
          (define-sharp-bang)
          (define-sharp-u)
          (set-dispatch-macro-character
           #\#
           #\\
           #'acl2-character-reader))))

(defvar *reckless-acl2-readtable*

; See "SUPPORT FOR FAST #n= and #n#" in acl2-fns.lisp.

  (let ((*readtable* (copy-readtable *acl2-readtable*)))
    (set-dispatch-macro-character #\#
                                  #\#
                                  #'reckless-sharp-sharp-read)
    (set-dispatch-macro-character #\#
                                  #\=
                                  #'reckless-sharp-equal-read)
    (set-dispatch-macro-character
     #\#
     #\\
     *old-character-reader*)
    *readtable*))

(defvar *load-compiled-verbose* nil)

(defun load-compiled (filename &optional verbose)

; It may be useful to implement the maybe-verbose argument for Lisps that do
; not print a "loading" message.  For now, we comment out code below that would
; do this.

  (when (and verbose
             *load-compiled-verbose*)
    (eval `(cw "~%Note: loading file ~s0.~|" ',filename)))
  #+clisp
  (let ((*readtable* *acl2-readtable-clisp-fas*))
    (load filename))
  #-clisp
  (load filename))

;                       Remarks on *acl2-readtable*
;
;
; Because read-object$ calls the Common Lisp function read, read-object$
; is a function of the values of the Common Lisp symbols (a)
; *readtable*, (b) *package*, and (c) *features*.  In ACL2, the user can
; specify the package to use, via in-package, which sets the global
; current-package.  The user of ACL2 has no (legitimate) control over the
; readtable, which is set above and discussed below.
;
; As for *features*, we currently permit full use of the *features*
; facility of the Common Lisp reader, with this caveat: it is an
; official part of the ACL2 story that *features* should have the same
; setting throughout all phases of ACL2 usage.  That is, the user must
; set up *features* at the beginning, before starting to use ACL2 and
; the user must then leave *features* alone (even though the
; implementors of ACL2 put :acl2-loop-only onto *features* during
; boot-strapping).  One bad consequence of our *features* policy is that
; verified files will not in general be verifiable or useable in other
; Lisp implementations or installations unless the settings of
; *features* relevant to one's usages of the #+ and #- are the same in
; the two Lisp implementations.  One simple way to obtain peace of mind
; on this topic is for the user not to use #+ or #- at all!  It might be
; cleaner for us simply to prohibit the use of the #+ and #- readmacros
; all together in ACL2.  This could be done at the cost of replacing the
; many uses of #+ and #- in axioms.lisp, and a few other places, with
; some sort of regular macro.
;
; Below is a detailed examination of the default Common Lisp readtable
; from the perspective of ACL2.  We want to make sure that when we read,
; we do not have side effects (e.g. via #.) of ACL2 but will merely
; either (a) cause an error or (b) generate a Lisp object, which we then
; will check with bad-lisp-object before handing it to ACL2 functions.
;
; All of the standard Common Lisp characters are either white space or
; constituent, with the following exceptions, which are read macros:
;
;   "  quote
;   #  number sign
;   '  quote
;   () parentheses
;   ,  comma
;   ;  comment
;   \  single escape
;   `  backquote
;   |  multiple escape
;
; With the exception of number sign, backquote and comma, we certainly
; want all of these readmacros to have their usual Common Lisp
; semantics.
;
; We have defined our own backquote and discussed it above.
;
; We now review the # situation:
;
;   ## and #= are for reading possibly circular stuff
;          bad-lisp-object may run forever
;   #'  reads as function
;          won't hurt anything
;   #(  vector
;          will be rejected by bad-lisp-object
;   #)  signals an error
;          enough said
;   #*  bit vector
;          will be rejected by bad-lisp-object
;   #,  load-time evaluation
;          we shut it off
;   #0-#9 used for infix arguments
;          ok
;   #:  uninterned symbol
;          will be rejected by bad-lisp-object
;   #<  signals an error
;          enough said
;   #\  character object
;          will be checked by bad-lisp-object; see also below
;   #|  start comment, ended by |#
;          ok
;   #<backspace | tab | newline | linefeed | page | return | space>
;       signals an error -- ok
;   #+  and #-
;       see the discussion of *features* above
;   #.  read time evaluation
;          we restrict it
;   #A, #a  arrays
;          will be checked by bad-lisp-object
;   #B, #b  binary rational
;          ok
;   #C, #c complex
;          ok (rejected by bad-lisp-object except for rational components)
;   #O, #o octal
;          ok
;   #P, #p pathname
;          will be checked by bad-lisp-object
;   #R, #r radix-n
;          fine
;   #S, #s structure
;          will be rejected by bad-lisp-object
;   #X, #x hex
;          ok
;
; Eventually, it will be best to define a read function for ACL2 solely in terms
; of ACL2 character reading primitives.  Common Lisp read is ambiguous.  There is
; the ambiguity of backquote described above.  There is the abiguity of which
; tokens get read as numbers.  To make matters a little more scary, there is
; nothing that prevents a Common Lisp implementation from adding, for example, a
; new # readmacro option that would provide something as potentially catastrophic
; as full-blown sharp-dot.  One obstacle to doing a read within ACL2 this is
; efficiency.  For example, ACL2 does not now support unread-char.  And given the
; requirement that whatever is specified in a guard must be checkable, it is
; unclear now how best to add unread-char since Common Lisp does permit one to
; detect whether a stream is in a ``just unread'' state.  ACL2 could enable one
; to answer such a question, but at the cost of having to store the information
; every time that a character was unread.


;          ACL2's Implementation of the character reader

; We have decided to take full charge of everything that # reader
; does, which is just a part of the way towards writing READ totally
; from scratch.  And we are pretty conservative about what #\ does
; accept; one can always get the characters one wants by using
; code-char.  Notice for example that if we're not careful, then ACL2
; could be potentially unsound when we have 8-bit characters, because
; it's conceivable that
;
; (equal (char-code "#\fifth-control-character") 5)
;
; is a theorem in one Common Lisp and yet
;
; (equal (char-code "#\fifth-control-character") 6)
;
; is a theorem in another.  Bizarre, but apparently not ruled out by
; dpANS.
;
; So, we manage this simply by modifying the character reader so that
; the #\ notation only works for single characters and for Space, Tab,
; Newline, Page, and Rubout; an error is caused otherwise.

; Our algorithm for reading character objects starting with #\ is
; quite simple.  We accumulate characters until encountering a
; whitespace character or a terminating macro character, from the list
; *acl2-read-character-terminators*.  The result must be either a
; single standard character or else one of the names (up to case,
; which we ignore in the multiple-character case) SPACE, TAB, NEWLINE,
; PAGE, and RUBOUT.  Otherwise we cause an error.  Note that if we do
; NOT cause an error, then any dpANS-compliant Common Lisp
; implementation's character reader would behave the same way, because
; dpANS says (in the section ``Sharpsign Backslash'') the following.

;    .....  After #\ is read, the reader backs up
;    over the slash and then reads a token, treating the initial slash
;    as a single escape character (whether it really is or not in the
;    current readtable).

; The rather involved description from dpANS in the section ``Reader
; Algorithm'' implies that when a token is terminated without error,
; it must be upon first encountering a whitespace character or a
; terminating macro character.

; Finally, here is an argument that we cannot reasonably allow ACL2 to
; accept character notations of the sort akcl allows, such as #\\112
; for #\J for example.  (By the way, 112 is octal for 74, which is
; (char-code #\J).)  This is sad, because it would have been nice to
; provide a way of reading arbitrary 8-bit characters in ACL2.

; In the following, we refer to documentation from Bill Schelter's
; info version of dpANS.

; So, assume that #\J parses the same as #\\112 (and we'll derive a
; ``contradiction'' of sorts).  The documentation from ``Sharpsign
; Backslash'' below implies that #\\112 parses as the character whose
; name is [STRING-UPCASE applied to] the 4-character string \112.  So
; if #\\112 parses as #\J, then the name of the character #\J is
; "\\112".  Then, the documentation for ``char-name'' (part of which
; is also below) implies that CHAR-NAME returns the character name,
; and hence (CHAR-NAME #\J) must be "\\112".  But probably this isn't
; true of the implementation (it's not true for akcl or allegro, for
; example).  And, it seems really dangerous for us to redefine
; CHAR-NAME in ACL2.

; What's worse, if we apply the first part of this argument to
; #\Newline, we see that the name of the character #\Newline is
; "\\12", which directly contradicts the final passage below from
; dpANS.

; In what follows we'll quote from dpANS (an emacs Info version).  We
; quote here from three sections, separated by ++++++++++++++++++.

;
; Sharpsign Backslash
; ...................
;
; Syntax: #\<<x>>
;
; [[[ text omitted ]]]
;
; When the token x is more than one character long, the x must have the
; syntax of a symbol with no embedded package markers.  In this case, the
; sharpsign backslash notation parses as the character whose name is
; (string-upcase x); see *See Character Names::.
;
; ++++++++++++++++++
;
; char-name                                                        [Function]
; ---------------------------------------------------------------------------
;
; `char-name'  character =>  name
;
; Arguments and Values::
; ......................
;
; character--a character.
;
; name--a string or nil.
;
; Description::
; .............
;
; Returns a string that is the name of the character, or nil if the
; character has no name.
;
; ++++++++++++++++++
;
; Character Names
; ---------------
;
; The following character names must be present in all conforming
; implementations:
;
; Newline


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;                       COMPILING and LOADING, PART 2
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

(defun non-trivial-acl2-proclaims-file-p ()
  (with-open-file (str "acl2-proclaims.lisp"
                       :direction :input
                       :if-does-not-exist nil)
                  (and str
                       (let* ((new-cons (cons nil nil))
                              (val (read str nil new-cons)))
                         (and (not (eq new-cons val))

; We might not need the following, but just in case we decide always to print
; an in-package form into the file, we require that the file have at least two
; forms.

                              (not (eq new-cons
                                       (read str nil new-cons))))))))

(defun compile-acl2 (&optional use-acl2-proclaims)

  (with-warnings-suppressed

   #+sbcl
   (declaim (optimize (safety 0) (space 0) (speed 3) (debug 0)))

; Here is a natural place to put compiler options.  In fact, we put them above,
; globally.

; (declaim (optimize (safety 0) (space 0) (speed 3)))

; However, Juho Snellman points out that SBCL resets the compiler policy on
; entry to LOAD / COMPILE-FILE, and restores the old value once the file has
; been loaded / compiled; thus the global declaim is no longer in effect once
; COMPILE-ACL2 gets called.

; Note on Illegal Instructions:  If ACL2 causes an illegal instruction
; trap it is difficult to figure out what is happening.  Here is a
; brute force way to do it.
; (0) create an events file or book that will recreate the
;     the state up to the event that causes the illegal instruction.
; (1) Copy saved_acl2 to old_saved_acl2
; (2) replace the declaim above with
;     (declaim (optimize (safety 3) (space 0) (speed 0)));
; (3) make full init
;     this will fail because of stack overflows during booting.
; (4) fire up old_saved_acl2
; (5) load the saved events file or book, recreating the state.
; (6) :q from (LP)
; (7) (progn (setq old-world-pair (get 'current-acl2-world 'acl2-world-pair))
;            t)
; (8) (dolist (name *acl2-files*)
;           (or (equal name "defpkgs")
;               (load source)))   ; load the (safety 3) .o files
;     Actually, the last time I did this I loaded each file manually
;     and I did not load ld or interface-raw.  I think they can be
;     loaded here though.
; (9) (progn (f-put-global 'current-acl2-world
;                          (car old-world-pair) *the-live-state*)
;            t)
;(10) (si::use-fast-links nil)
;(11) enter (LP) and execute the offending event.
;(12) once the bug is fixed, be sure to change the declaim
;     back to (safety 0) (speed 3) before recompiling.

; Note on loading before compiling.  We load each ACL2 source file before
; compiling it to make sure that the functions needed to execute macros have
; been defun-ed before they are called.  Normal Common Lisp compilation does
; not do this.  So we cause all forms to be executed before we start the
; compilation.  This guarantees that when macros run, the functions they call
; have been defined.

; In general, and for the same reason, all ACL2 user checked files are also
; loaded before they are compiled.

; As of version 18a, cmulisp spews gc messages to the terminal even when
; standard and error output are redirected.  So we turn them off.

   (when (and use-acl2-proclaims
              (not (non-trivial-acl2-proclaims-file-p)))

; Note that GNUmakefile provides special treatment for the value :REUSE of
; environment/make variable USE_ACL2_PROCLAIMS.  With that treatment, we avoid
; calling compile-acl2 with use-acl2-proclaims = t, and thus we don't get to
; this point.

     (error "Note: Skipping compilation that is intended to use generated ~
             file \"acl2-proclaims.lisp\", because that file is missing or ~
             has no forms in it."))
   (when (and (not use-acl2-proclaims)
              (probe-file "acl2-proclaims.lisp"))
     (delete-file "acl2-proclaims.lisp"))
   (cond
    ((or (not (probe-file *acl2-status-file*))
         (with-open-file (str *acl2-status-file*
                              :direction :input)
                         (not (eq (read str nil)
                                  :checked))))
     (check-suitability-for-acl2)))
   (when (not *suppress-compile-build-time*)
     (our-with-compilation-unit
      (let ((*readtable* *acl2-readtable*)
            #+akcl

; AKCL compiler note stuff.  We have so many tail recursive functions
; that the notes about tail recursion optimization are just too much
; to take.

            (compiler:*suppress-compiler-notes* t))
        (when use-acl2-proclaims
          (proclaim-files nil "acl2-proclaims.lisp" nil))
        (dolist (name *acl2-files*)
          (or (equal name "defpkgs")
              (let ((source (make-pathname :name name
                                           :type *lisp-extension*)))
                (load source)
                (or (equal name "proof-checker-pkg")
                    (progn
                      (when (not use-acl2-proclaims)

; So, we have not loaded acl2-proclaims.lisp.

                        (proclaim-file source))
                      (compile-file source)
                      (load-compiled
                       (make-pathname :name name
                                      :type *compiled-file-extension*))))))))))
   (note-compile-ok)))

#+gcl
(defvar user::*fast-acl2-gcl-build* nil)

(defun load-acl2 (&optional fast)

; If fast is true, then we are welcome to avoid optimizations that might make
; for a better saved image.  For example, we use fast = t when building simply
; to write proclaim forms into acl2-proclaims.lisp.

  (declare (ignorable fast))

  (our-with-compilation-unit ; only needed when *suppress-compile-build-time*
   (with-warnings-suppressed

    (when (and *suppress-compile-build-time*
               (not fast))

; When we rely on Lisp to compile on-the-fly, we want to proclaim before
; loading.  This might actually be broken; we got an error when trying to do
; proclaiming here for GCL, complaining that "The variable
; *COMMON-LISP-SYMBOLS-FROM-MAIN-LISP-PACKAGE* is unbound."  If we ever decide
; to proclaim when *suppress-compile-build-time* is true, we can deal with that
; problem then, perhaps by using
; *copy-of-common-lisp-symbols-from-main-lisp-package* instead (though we
; haven't tried that).

      (proclaim-files nil "acl2-proclaims.lisp" t))

; If we are in the first pass of two passes, then don't waste time doing the
; slow build for GCL (where we compile all *1* functions as we go through
; initialization).

    #+(and gcl acl2-mv-as-values)
    (when fast
      (setq user::*fast-acl2-gcl-build* t))

    #+akcl

; We grow the image slowly, since we now do allocation on start-up.  We are
; assuming that people will be using load-acl2 only as part of the process of
; building a saved image, and hence that this slow growth policy will be undone
; by the function save-acl2-in-akcl.  If we are

    (when (not fast)
      (loop
       for type in
       '(cons fixnum symbol array string cfun sfun

; In akcl, at least some versions of it, we cannot call allocate-growth on the
; following two types.

              #+gcl contiguous
              #+gcl relocatable
              )
       do
       (cond
        ((or (boundp 'si::*gcl-major-version*) ;GCL 2.0 or greater
             (and (boundp 'si::*gcl-version*)  ;GCL 1.1
                  (= si::*gcl-version* 1)))
         (si::allocate-growth type 1 10 50 2))
        (t (si::allocate-growth type 1 10 50)))))
    (cond
     ((or (not (probe-file *acl2-status-file*))
          (with-open-file (str *acl2-status-file*
                               :direction :input)
                          (not (member (read str nil)
                                       '(:compiled :initialized)))))
      (error "Please compile ACL2 using ~s, which will write~%~
              the token :COMPILED to the file acl2-status.txt."
             '(compile-acl2))))
    (let ((*readtable* *acl2-readtable*)
          (extension (if *suppress-compile-build-time*
                         *lisp-extension*
                       *compiled-file-extension*)))
      (dolist (name *acl2-files*)
        (or (equal name "defpkgs")
            (if (equal name "proof-checker-pkg")
                (load "proof-checker-pkg.lisp")
              (load-compiled (make-pathname :name name
                                            :type extension)))))
      (load "defpkgs.lisp")
      (when (and (not *suppress-compile-build-time*) ; other case is above
                 (not fast))
        (proclaim-files nil "acl2-proclaims.lisp" t))
      (in-package "ACL2")

; Do not make state special, as that can interfere with tail recursion removal.
; The following form is provided merely as a convenience to the user, who may
; want to execute ACL2 forms in raw Lisp.  The use of set instead of setq is to
; avoid getting a warning in cmulisp that state is undefined.

      (set 'state *the-live-state*)
      "ACL2"))))

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;                            DECLARATIONS
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; We use XARGS in DECLARE forms.  By making this proclamation, we
; suppress compiler warnings.

(declaim (declaration xargs))

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;                            EXITING LISP
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

(defparameter *acl2-panic-exit-status* nil)

(defun exit-lisp (&optional (status '0 status-p))

; Parallelism blemish: In ACL2(p), LispWorks 6.0.1 hasn't always successfully
; exited when exit-lisp was called.  The call below of stop-multiprocessing is
; an attempt to improve the chance of a succesful exit.  In practice, the call
; does not fix the problem.  However, we leave it for now since we don't think
; it can hurt.  If exit-lisp starts working reliably without the following
; calls to send-die-to-worker-threads and stop-multiprocessing, they should be
; removed.

  #+(and acl2-par lispworks)
  (when mp::*multiprocessing*
    (send-die-to-worker-threads)
    (mp::stop-multiprocessing))

; The status (an integer) will be returned as the exit status (shell variable
; $?).  We avoid passing the status argument when it is 0, in case Windows or
; other operating systems get confused by it.  However, this function is a
; no-op if we are already in the process of quitting via this function; see the
; comment below the occurrence below of *acl2-panic-exit-status*.

; It appeared at one point that (ccl::quit 0) is more reliable than
; (ccl::quit), but that's no longer clear.  Still, it seems reasonable to pass
; the status explicitly to the individual Lisp's exit function if that status
; is passed explicitly here -- hence the use of status-p.

  (cond
   ((null status) ; shouldn't happen
    (error "Passed null status to exit-lisp!"))
   (*acl2-panic-exit-status*

; We have seen various type errors and bus errors when attempting to quit in
; CCL.  Gary Byers pointed out that this may be caused by attempting to quit
; while in the process of quitting.  So, we avoid doing a quit if already in
; the process of quitting.

    (return-from exit-lisp nil)))
  (setq *acl2-panic-exit-status* status)
  #+clisp
  (if status-p (user::exit status) (user::exit))
  #+lispworks ; Version 4.2.0; older versions have used bye
  (if status-p (lispworks:quit :status status) (lispworks:quit))
  #+akcl
  (if status-p (lisp::bye status) (lisp::bye))
  #+lucid
  (lisp::exit) ; don't know how to handle status, but don't support lucid
  #+ccl
  (if status-p (ccl::quit status) (ccl::quit))
  #+cmu
  (cond ((null status-p)
         (common-lisp-user::quit t))
        (t ; quit does not take an exit status as of CMUCL version 19e
         (unix:unix-exit status)))
  #+allegro
  (user::exit status :no-unwind t)
  #+(and mcl (not ccl))
  (cl-user::quit) ; mcl support is deprecated, so we don't worry about status
  #+sbcl
  (let ((sym (or (find-symbol "EXIT" 'sb-ext)
                 (find-symbol "QUIT" 'sb-ext))))

; Quoting http://www.sbcl.org/manual/#Exit, regarding sb-ext:quit:

;   Deprecated in favor of sb-ext:exit as of 1.0.56.55 in May 2012. Expected to
;   move into late deprecation in May 2013.

    (cond ((or (null sym)
               (not (fboundp sym)))
           (error "No function named \"EXIT\" or \"QUIT\" is defined in the ~%~
                   \"SB-EXT\" package.  Perhaps you are using a very old or ~%~
                   very new version of SBCL.  If you are surprised by this ~%~
                   message, feel free to contact the ACL2 implementors."))
          ((equal (symbol-name sym) "EXIT")
           (if status-p
               (funcall sym :code status)
             (funcall sym)))
          (t ; (equal (symbol-name sym) "QUIT")
           (if status-p
               (funcall sym :unix-status status)
             (funcall sym)))))

; Return status (to avoid an ignore declaration) if we cannot exit lisp.  The
; caller of this function should complain if Lisp survives the call.  The panic
; flag may help though.

  (progn status-p status))

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;                            CONSTANTS
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; Allegro 6.0 (and probably later versions) warns when the following two (at
; least) constants are in axioms.lisp, even with boundp checks (as in ACL2
; Version_2.5).  The warning is a result of evaluating the defconstant twice:
; when loading the source file and when subsequently loading the compiled file.
; So starting with Version_2.6 we put the constants here, since this file
; (acl2.lisp) is not compiled and hence is only loaded once.

; A slight complication is that *slashable-array* uses *slashable-chars*, which
; in turn is used in the definition of function some-slashable.  (There are
; other such examples, but we'll focus on that one.)  So, defconst
; *slashable-chars* needs to be defined in the ACL2 loop even though, as of
; Version_2.5, it was used in the definition of *slashable-array*, which we
; want to include in the present file.  So we inline the defconsts below.

(defconstant *slashable-array*
  (let ((ar (make-array 256 :initial-element nil)))
    (dolist (ch

; Inline *slashable-chars*; see the comment above.

             '(#\Newline #\Page #\Space #\" #\# #\' #\( #\) #\, #\: #\; #\\ #\`
               #\a #\b #\c #\d #\e #\f #\g #\h #\i #\j #\k #\l #\m #\n #\o #\p
               #\q #\r #\s #\t #\u #\v #\w #\x #\y #\z #\|))
            (setf (aref ar (char-code ch))
                  t))
    ar))

(defconstant *suspiciously-first-numeric-array*
  (let ((ar (make-array 256 :initial-element nil)))
    (dolist (x

; Inline *suspiciously-first-numeric-chars*; see the comment above.

             '(#\0 #\1 #\2 #\3 #\4 #\5 #\6 #\7 #\8 #\9 #\+ #\- #\. #\^ #\_))
            (setf (aref ar (char-code x))
                  t))
    ar))

(defconstant *suspiciously-first-hex-array*
  (let ((ar (make-array 256 :initial-element nil)))
    (dolist (x

; Inline *suspiciously-first-hex-chars*; see the comment above.

             '(#\0 #\1 #\2 #\3 #\4 #\5 #\6 #\7 #\8 #\9
               #\A #\B #\C #\D #\E #\F
               #\a #\b #\c #\d #\e #\f
               #\+ #\- #\. #\^ #\_))
            (setf (aref ar (char-code x))
                  t))
    ar))

(defconstant *base-10-array*
  (let ((ar (make-array 256 :initial-element nil)))
    (dolist (x

; Inline *base-10-chars*; see the comment above.

             '(#\0 #\1 #\2 #\3 #\4 #\5 #\6 #\7 #\8 #\9))
            (setf (aref ar (char-code x))
                  t))
    ar))

(defconstant *hex-array*
  (let ((ar (make-array 256 :initial-element nil)))
    (dolist (x

; Inline *hex-digits*; see the comment above.

             '(#\0 #\1 #\2 #\3 #\4 #\5 #\6 #\7 #\8 #\9
               #\A #\B #\C #\D #\E #\F
               #\a #\b #\c #\d #\e #\f))
            (setf (aref ar (char-code x))
                  t))
    ar))

(defconstant *letter-array*
  (let ((ar (make-array 256 :initial-element nil)))
    (dolist (ch

; Inline *letter-array*; see the comment above.

             '(#\A #\B #\C #\D #\E #\F #\G #\H #\I #\J #\K #\L #\M #\N #\O #\P
               #\Q #\R #\S #\T #\U #\V #\W #\X #\Y #\Z
               #\a #\b #\c #\d #\e #\f #\g #\h #\i #\j #\k #\l #\m #\n #\o #\p
               #\q #\r #\s #\t #\u #\v #\w #\x #\y #\z))
      (setf (aref ar (char-code ch))
            t))
    ar))

(defmacro suspiciously-first-numeric-array (print-base)
  `(if (eql ,print-base 16)
       *suspiciously-first-hex-array*
     *suspiciously-first-numeric-array*))

(defmacro numeric-array (print-base)
  `(if (eql ,print-base 16)
       *hex-array*
     *base-10-array*))

(defconstant *char-code-backslash* (char-code #\\))

(defconstant *char-code-slash* (char-code #\/))

(defconstant *char-code-double-gritch* (char-code #\"))

; The following constant was originally in translate.lisp, but CLISP warned
; that it was being redefined.  This seems to be the same problem as mentioned
; above for Allegro, so we define it here.

(defconstant *big-n-special-object* '(nil . nil))

(defconstant *number-of-return-values*

; Keep this in sync with related code in translate11.

  32)

(defconstant *boole-array*

; Keep this in sync with the defconst forms just above the definition of
; boole$.

  (let ((ar (make-array 16 :element-type 'fixnum))
        (i 0))
    (declare (type (simple-array fixnum (*)) ar))
    (dolist (x `((boole-1     . ,boole-1)
                 (boole-2     . ,boole-2)
                 (boole-and   . ,boole-and)
                 (boole-andc1 . ,boole-andc1)
                 (boole-andc2 . ,boole-andc2)
                 (boole-c1    . ,boole-c1)
                 (boole-c2    . ,boole-c2)
                 (boole-clr   . ,boole-clr)
                 (boole-eqv   . ,boole-eqv)
                 (boole-ior   . ,boole-ior)
                 (boole-nand  . ,boole-nand)
                 (boole-nor   . ,boole-nor)
                 (boole-orc1  . ,boole-orc1)
                 (boole-orc2  . ,boole-orc2)
                 (boole-set   . ,boole-set)
                 (boole-xor   . ,boole-xor)))
      (or (typep (cdr x) 'fixnum)
          (error "We expected the value of ~s to be a fixnum, but it is ~s!"
                 (car x) (cdr x)))
      (setf (aref ar i) (cdr x))
      (incf i))
    ar))

; The following constants were originally in memoize-raw.lisp, but CMUCL caused
; a redefinition error.  This may be the same problem as mentioned above for
; Allegro.
#+hons
(progn
; locals used in memoize-on and memoize-off

(defconstant *mo-f* (make-symbol "F"))
(defconstant *mo-h* (make-symbol "H"))
(defconstant *mo-o* (make-symbol "O"))


; locals used in functions generated by memoize-fn

(defconstant *mf-old-caller* (make-symbol "OLD-CALLER"))
(defconstant *mf-start-hons* (make-symbol "START-HONS"))
(defconstant *mf-start-pons* (make-symbol "START-PONS"))
(defconstant *mf-start-bytes* (make-symbol "START-BYTES"))
(defconstant *mf-ans* (make-symbol "ANS"))
(defconstant *mf-ans-p* (make-symbol "ANS-P"))
(defconstant *mf-ma* (make-symbol "MA"))
(defconstant *mf-args* (make-symbol "ARGS"))
(defconstant *mf-2mmf* (make-symbol "MF-2MMF"))
(defconstant *mf-2mmf-fnn* (make-symbol "MF-2MMF-FNN"))
(defconstant *mf-count-loc* (make-symbol "MF-COUNT-LOC"))

(defconstant *attached-fn-temp* (make-symbol "ATTACHED-FN-TEMP"))
)

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;                            STATISTICS
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; See the comment in *rewrite-depth-max* about rewrite stack depth:
; (push :acl2-rewrite-meter *features*)

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;                            PROMPTS
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; New ACL2 users sometimes do not notice that they are outside the ACL2
; read-eval-print loop when in a break.  See the discussion of "PROMPTS" in
; interface-raw.lisp for how we deal with this.  For GCL, we currently (as of
; GCL version 2.6.6) need a patch for built-in function si::break-level.  This
; requires a package change, so we put that patch in a file that is not
; compiled; the present file serves nicely.

; However, we abandon this prompts mess for ANSI GCL.

#+(and gcl (not cltl2)) ; Let's avoid this mess for the more recent ANSI GCL
(in-package "SYSTEM")
#+(and gcl (not cltl2))
(progn
(defvar *debug-prompt-suffix* "")
; See comment about ACL2 for how the following is patched from si::break-level.
(defun break-level-for-acl2 (at &optional env)
  (eval '(acl2::print-proof-tree-finish acl2::*the-live-state*))
  (let* ((*break-message* (if (stringp at) at *break-message*))
         (*quit-tags* (cons (cons *break-level* *quit-tag*) *quit-tags*))
         (*quit-tag* (cons nil nil))
         (*break-level* (if (not at) *break-level* (cons t *break-level*)))
         (*ihs-base* (1+ *ihs-top*))
         (*ihs-top* (1- (ihs-top)))
         (*current-ihs* *ihs-top*)
         (*frs-base* (or (sch-frs-base *frs-top* *ihs-base*) (1+ (frs-top))))
         (*frs-top* (frs-top))
         (*break-env* nil)
         (be *break-enable*)
         (*break-enable*
          (progn
            (if (stringp at) nil be)))
                                        ;(*standard-input* *terminal-io*)
         (*readtable* (or *break-readtable* *readtable*))
         (*read-suppress* nil)
         (+ +) (++ ++) (+++ +++)
         (- -)
         (* *) (** **) (*** ***)
         (/ /) (// //) (/// ///)
         )
                                        ; (terpri *error-output*)
    (unless (or be (not (stringp at)))
      (simple-backtrace)
      (break-quit (length (cdr *break-level*))))
    (catch-fatal 1)
    (setq *interrupt-enable* t)
    (cond ((stringp at) (set-current)(terpri *error-output*)
           (setq *no-prompt* nil)
           )
          (t (set-back at env)))
      (loop
       (setq +++ ++ ++ + + -)
       (cond (*no-prompt* (setq *no-prompt* nil))
             (t ; ACL2 patch is in the following form, only
              (format *debug-io* "~&~a~a~a>~{~*>~}"
                      (if (stringp at) "" "dbl:")
                      (if (eq *package* (find-package 'user)) ""
                        (package-name *package*))
                      *debug-prompt-suffix*
                      *break-level*)))
       (force-output *error-output*)
       (when
        (catch 'step-continue
        (catch *quit-tag*
          (setq - (locally (declare (notinline read))
                           (dbl-read *debug-io* nil *top-eof*)))
          (when (eq - *top-eof*) (lisp::bye -1))
          (let* ( break-command
                 (values
                  (multiple-value-list
                  (LOCALLY (declare (notinline break-call evalhook))
                           (if (keywordp -)(setq - (cons - nil)))
                           (cond ((and (consp -) (keywordp (car -)))
                                  (setq break-command t)
                                  (break-call (car -) (cdr -) 'si::break-command))
                                 (t (evalhook - nil nil *break-env*)))))))
            (and break-command (eq (car values) :resume )(return))
            (setq /// // // / / values *** ** ** * * (car /))
            (fresh-line *debug-io*)
            (dolist (val /)
                    (locally (declare (notinline prin1)) (prin1 val *debug-io*))
                    (terpri *debug-io*)))
          nil))
        (terpri *debug-io*)
        (break-current))))))
#+(and gcl (not cltl2))
(in-package "ACL2")

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;                        Additional hacks for CCL
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; Also see the acl2h-init code.

; Bob Boyer uses the following at times.

; #+ccl
; (in-package "CCL")
; #+ccl
; (flet ((go-slow
;         ()
;         (set-current-compiler-policy (new-compiler-policy :inline-self-calls #'false))
;         (set-current-file-compiler-policy (new-compiler-policy :inline-self-calls #'false))
;         (proclaim '(optimize (debug 3) (compilation-speed 0)
;                              (safety 3) (speed 0) (space 0)))))
;   (go-slow))

; The following two assignments seemed to speed up regression runs by about
; 7.7% as opposed to only the second, which seemed to have little effect.
; Binding these variables in LP, instead of this, didn't seem to provide any
; of that speed-up.
; NOTE: If you don't like these defaults, try Bob Boyer's approach: put these
; same forms in your ~/ccl-init.lisp file, but replacing nil with t.
; NOTE: The first of these seemed to be necessary even in 32-bit CCL r13193,
; where one might have expected that not to be the case.
#+ccl
(when (boundp 'ccl::*save-interactive-source-locations*)
  (setq ccl::*save-interactive-source-locations* nil))
#+ccl
(when (boundp 'ccl::*save-source-locations*)
  (setq ccl::*save-source-locations* nil))

; As of CCL revision 15972 (and probably many earlier revisions), CCL treats
; "~user/" as "~/".  (See CCL bug 1121,
; http://trac.clozure.com/ccl/ticket/1121.)  The following workaround was
; suggested by Gary Byers.
#+ccl
(setq ccl:*trust-paths-from-environment* nil)