1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
|
# Hints shown to the user, periodically, randomly, one line at a time, and only
# while the plane is flying level.
# Empty lines an lines starting with '#' are not shown.
Hint: to exit the program press SHIFT-Q SHIFT-Q
Hint: to leave the window in background, press 'd'
Hint: check for updates at www.icosaedro.it/acm/download.html
Hint: press SHIFT-H to switch between HUD and classic instruments
Hint: press 'r' to show HSI, ADF and radar
Hint: one nautical mile corresponds to about 2 Km
Hint: knots is a speed unit corresponding to one nautical mile per hour
Hint: one feet is about one third of a meter
Hint: never exceed the maximum vertical load of the aircraft you are flying on!
Hint: your plane lacks the speed brakes? use the flaps instead!
Hint: press < or > to turn at standard rate of 3 DEG/s then press / or | to release
Hint: press , or . to turn at 1.5 DEG/s then press / or | to release
Hist: hold heading with | and release with /
Hint: never exceed 25 DEG angle of bank for best passengers comfort!
Hint: need a GPS? press SHIFT-D
Hint: don't forget to enable the rudder/aileron coordinator (SHIFT-X)
Hint: engine control keys: 1 (idle) 2 (decrease) 3 (increase) 4 (max)
Hint: to hold the current speed enable the auto-throttle (SHIFT-T)
Hint: to start/stop/reset the timer press 't'
Hint: to retract/deploy the landing gear press 'g'
Hint: to deploy the flaps press 'h' one or more times, retract with 'y'
Hint: to hold the current altitude, press SHIFT-Z
Hint: to hold the current climb rate press SHIFT-A
Hint: release the auto-pilot system with the Home key
Hint: select NAVAID frequency with 9 0, rotate the OBS pointer with 7 8
Hint: select RNAV waypoint with F3 F4 F5 F6
Hint: look around you: press NumLock then the arrows of the numeric keypad
Hint: switch between NAV/RNAV HSI receivers with SPACE
Hint: follow the VOR radial with the auto-navigator (SHIFT-N)
Hint: follow the ILS landing path with the auto-landing (SHIFT-L)
Hint: ACM comes with a good manual: read it carefully!
Hint: set the zoom factor with + and -
Hist: try flying in rate control mode with SHIFT-E
|
