#!/bin/sh
# Run this to generate all the initial makefiles, etc.

# default version requirements ...
test "$REQUIRED_AUTOMAKE_VERSION" || REQUIRED_AUTOMAKE_VERSION=1.8
test "$REQUIRED_AUTORECONF_VERSION" || REQUIRED_AUTORECONF_VERSION=2.52
test "$REQUIRED_GLIB_GETTEXT_VERSION" || REQUIRED_GLIB_GETTEXT_VERSION=2.2.0
test "$REQUIRED_INTLTOOL_VERSION" || REQUIRED_INTLTOOL_VERSION=0.25
test "$REQUIRED_PKG_CONFIG_VERSION" || REQUIRED_PKG_CONFIG_VERSION=0.14.0

# a list of required m4 macros.  Package can set an initial value
test "$REQUIRED_M4MACROS" || REQUIRED_M4MACROS=

topdir=`pwd`
srcdir=`dirname $0`

# Not all echo versions allow -n, so we check what is possible. This test is
# based on the one in autoconf.
ECHO_C=
ECHO_N=
case `echo -n x` in
-n*)
  case `echo 'x\c'` in
  *c*) ;;
  *)   ECHO_C='\c';;
  esac;;
*)
  ECHO_N='-n';;
esac

# some terminal codes ...
if tty 1>/dev/null 2>&1; then
    boldface="`tput bold 2>/dev/null`"
    normal="`tput sgr0 2>/dev/null`"
else
    boldface=
    normal=
fi
printbold() {
    echo $ECHO_N "$boldface" $ECHO_C
    echo "$@"
    echo $ECHO_N "$normal" $ECHO_C
}    
printerr() {
    echo "$@" >&2
}

if [ -z "$srcdir" ]; then
    printerr "***Warning*** \$srcdir is not defined, out of dir autogen is broken!"
    srcdir=.
fi

PKG_NAME=`autoconf --trace='AC_INIT:$1' "$srcdir/configure.ac"`

# Usage:
#     compare_versions MIN_VERSION ACTUAL_VERSION
# returns true if ACTUAL_VERSION >= MIN_VERSION
compare_versions() {
    ch_min_version=$1
    ch_actual_version=$2
    ch_status=0
    IFS="${IFS=	 }"; ch_save_IFS="$IFS"; IFS="."
    set $ch_actual_version
    for ch_min in $ch_min_version; do
        ch_cur=`echo $1 | sed 's/[^0-9].*$//'`; shift # remove letter suffixes
        if [ -z "$ch_min" ]; then break; fi
        if [ -z "$ch_cur" ]; then ch_status=1; break; fi
        if [ $ch_cur -gt $ch_min ]; then break; fi
        if [ $ch_cur -lt $ch_min ]; then ch_status=1; break; fi
    done
    IFS="$ch_save_IFS"
    return $ch_status
}

# Usage:
#     version_check PACKAGE VARIABLE CHECKPROGS MIN_VERSION SOURCE
# checks to see if the package is available
version_check() {
    vc_package=$1
    vc_variable=$2
    vc_checkprogs=$3
    vc_min_version=$4
    vc_source=$5
    vc_status=1
    local ${vc_variable}_VERSION

    vc_checkprog=`eval echo "\\$$vc_variable"`
    if [ -n "$vc_checkprog" ]; then
	printbold "using $vc_checkprog for $vc_package"
	return 0
    fi

    printbold "checking for $vc_package >= $vc_min_version..."
    for vc_checkprog in $vc_checkprogs; do
	echo $ECHO_N "  testing $vc_checkprog... " $ECHO_C
	if $vc_checkprog --version < /dev/null > /dev/null 2>&1; then
	    vc_actual_version=`$vc_checkprog --version | head -n 1 | \
                               sed 's/^.*[ 	]\([0-9.]*[a-z]*\).*$/\1/'`
	    if compare_versions $vc_min_version $vc_actual_version; then
		echo "found $vc_actual_version"
		# set variables
		eval "$vc_variable=$vc_checkprog; \
			${vc_variable}_VERSION=$vc_actual_version"
		vc_status=0
		break
	    else
		echo "too old (found version $vc_actual_version)"
	    fi
	else
	    echo "not found."
	fi
    done
    if [ "$vc_status" != 0 ]; then
	printerr "***Error***: You must have $vc_package >= $vc_min_version installed"
	printerr "  to build $PKG_NAME.  Download the appropriate package for"
	printerr "  from your distribution or get the source tarball at"
        printerr "    $vc_source"
	printerr
	exit $vc_status
    fi
    return $vc_status
}

# Usage:
#     require_m4macro filename.m4
# adds filename.m4 to the list of required macros
require_m4macro() {
    case "$REQUIRED_M4MACROS" in
	$1\ * | *\ $1\ * | *\ $1) ;;
	*) REQUIRED_M4MACROS="$REQUIRED_M4MACROS $1" ;;
    esac
}

# Usage:
#     add_to_cm_macrodirs dirname
# Adds the dir to $cm_macrodirs, if it's not there yet.
add_to_cm_macrodirs() {
    case $cm_macrodirs in
    "$1 "* | *" $1 "* | *" $1") ;;
    *) cm_macrodirs="$cm_macrodirs $1";;
    esac
}

# Usage:
#     print_m4macros_error
# Prints an error message saying that autoconf macros were misused
print_m4macros_error() {
    printerr "***Error***: some autoconf macros required to build $PKG_NAME"
    printerr "  were not found in your aclocal path, or some forbidden"
    printerr "  macros were found.  Perhaps you need to adjust your"
    printerr "  ACLOCAL_PATH?"
    printerr
}

# Usage:
#     check_m4macros
# Checks that all the requested macro files are in the aclocal macro path
# Uses REQUIRED_M4MACROS and ACLOCAL_PATH variables.
check_m4macros() {
    # construct list of macro directories
    cm_macrodirs=`aclocal --print-ac-dir`
    # aclocal also searches a version specific dir, eg. /usr/share/aclocal-1.9
    # but it contains only Automake's own macros, so we can ignore it.

    # Read the dirlist file
    if [ -s $cm_macrodirs/dirlist ]; then
	cm_dirlist=`sed 's/[ 	]*#.*//;/^$/d' $cm_macrodirs/dirlist`
	if [ -n "$cm_dirlist" ] ; then
	    for cm_dir in $cm_dirlist; do
		if [ -d $cm_dir ]; then
		    add_to_cm_macrodirs $cm_dir
		fi
	    done
	fi
    fi

    # Parse $ACLOCAL_PATH
    IFS="${IFS=	 }"; save_IFS="$IFS"; IFS=":"
    for dir in ${ACLOCAL_PATH}; do
	add_to_cm_macrodirs "$dir"
    done
    IFS="$save_IFS"

    cm_status=0
    if [ -n "$REQUIRED_M4MACROS" ]; then
	printbold "Checking for required M4 macros..."
	# check that each macro file is in one of the macro dirs
	for cm_macro in $REQUIRED_M4MACROS; do
	    cm_macrofound=false
	    for cm_dir in $cm_macrodirs; do
		if [ -f "$cm_dir/$cm_macro" ]; then
		    cm_macrofound=true
		    break
		fi
		# The macro dir in Cygwin environments may contain a file
		# called dirlist containing other directories to look in.
		if [ -f "$cm_dir/dirlist" ]; then
		    for cm_otherdir in `cat $cm_dir/dirlist`; do
			if [ -f "$cm_otherdir/$cm_macro" ]; then
			    cm_macrofound=true
		            break
			fi
		    done
		fi
	    done
	    if $cm_macrofound; then
		:
	    else
		printerr "  $cm_macro not found"
		cm_status=1
	    fi
	done
    fi
    if [ "$cm_status" != 0 ]; then
        print_m4macros_error
        exit $cm_status
    fi
    if [ "$cm_status" != 0 ]; then
        print_m4macros_error
	exit $cm_status
    fi
}

version_check automake AUTOMAKE automake $REQUIRED_AUTOMAKE_VERSION \
    "http://ftp.gnu.org/pub/gnu/automake/automake-$REQUIRED_AUTOMAKE_VERSION.tar.xz"

version_check autoreconf AUTORECONF autoreconf $REQUIRED_AUTORECONF_VERSION \
    "http://ftp.gnu.org/pub/gnu/autoconf/autoconf-$REQUIRED_AUTORECONF_VERSION.tar.xz"

version_check glib-gettext GLIB_GETTEXTIZE glib-gettextize $REQUIRED_GLIB_GETTEXT_VERSION \
    "ftp://ftp.gtk.org/pub/gtk/v2.2/glib-$REQUIRED_GLIB_GETTEXT_VERSION.tar.gz"
require_m4macro glib-gettext.m4

version_check intltool INTLTOOLIZE intltoolize $REQUIRED_INTLTOOL_VERSION \
    "http://ftp.gnome.org/pub/GNOME/sources/intltool/"
require_m4macro intltool.m4

version_check pkg-config PKG_CONFIG pkg-config $REQUIRED_PKG_CONFIG_VERSION \
    "'http://www.freedesktop.org/software/pkgconfig/releases/pkgconfig-$REQUIRED_PKG_CONFIG_VERSION.tar.gz"
require_m4macro pkg.m4

check_m4macros

if [ "$#" = 0 -a "x$NOCONFIGURE" = "x" ]; then
  printerr "**Warning**: I am going to run \`configure' with no arguments."
  printerr "If you wish to pass any to it, please specify them on the"
  printerr \`$0\'" command line."
  printerr
fi

printbold "Processing $configure_ac"

cd $srcdir

# if the AC_CONFIG_MACRO_DIR() macro is used, create that directory
# This is a automake bug fixed in automake 1.13.2
# See http://debbugs.gnu.org/cgi/bugreport.cgi?bug=13514
m4dir=`autoconf --trace 'AC_CONFIG_MACRO_DIR:$1'`
if [ -n "$m4dir" ]; then
    mkdir -p $m4dir
fi

printbold "Running $GLIB_GETTEXTIZE... Ignore non-fatal messages."
echo "no" | $GLIB_GETTEXTIZE --force --copy || exit 1

printbold "Running $INTLTOOLIZE..."
$INTLTOOLIZE --force --copy --automake || exit 1

# Now that all the macros are sorted, run autoreconf ...
printbold "Running autoreconf..."
autoreconf --verbose --force --install -Wno-portability || exit 1

cd "$topdir"

if test x$NOCONFIGURE = x; then
    printbold Running $srcdir/configure "$@" ...
    $srcdir/configure "$@" \
	&& echo Now type \`make\' to compile $PKG_NAME || exit 1
else
    echo Skipping configure process.
fi