/*
 [The "BSD license"]
 Copyright (c) 2005-2009 Jim Idle, Temporal Wave LLC
 http://www.temporal-wave.com
 http://www.linkedin.com/in/jimidle

 All rights reserved.

 Redistribution and use in source and binary forms, with or without
 modification, are permitted provided that the following conditions
 are met:
 1. Redistributions of source code must retain the above copyright
    notice, this list of conditions and the following disclaimer.
 2. Redistributions in binary form must reproduce the above copyright
    notice, this list of conditions and the following disclaimer in the
    documentation and/or other materials provided with the distribution.
 3. The name of the author may not be used to endorse or promote products
    derived from this software without specific prior written permission.

 THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/

/*
 * This code generating template and the associated C runtime was produced by:
 * Jim Idle jimi|hereisanat|idle|dotgoeshere|ws.
 * If it causes the destruction of the Universe, it will be pretty cool so long as
 * I am in a different one at the time.
 */
cTypeInitMap ::= [
	"int"		    : "0",              // Integers     start out being 0
	"long"		    : "0",              // Longs        start out being 0
	"float"		    : "0.0",           // Floats       start out being 0
	"double"	    : "0.0",           // Doubles      start out being 0
	"ANTLR3_BOOLEAN"    : "ANTLR3_FALSE",   // Booleans     start out being Antlr C for false
	"byte"		    : "0",              // Bytes        start out being 0
	"short"		    : "0",              // Shorts       start out being 0
	"char"		    : "0"              // Chars        start out being 0
]

leadIn(type) ::=
<<
/** \file
 *  This <type> file was generated by $ANTLR version <ANTLRVersion>
 *
 *     -  From the grammar source file : <fileName>
 *     -                            On : <generatedTimestamp>
<if(LEXER)>
 *     -                 for the lexer : <name>Lexer
<endif>
<if(PARSER)>
 *     -                for the parser : <name>Parser
<endif>
<if(TREE_PARSER)>
 *     -           for the tree parser : <name>TreeParser
<endif>
 *
 * Editing it, at least manually, is not wise.
 *
 * C language generator and runtime by Jim Idle, jimi|hereisanat|idle|dotgoeshere|ws.
 *
 *
>>

/** The overall file structure of a recognizer; stores methods for rules
 *  and cyclic DFAs plus support code.
 */
outputFile( LEXER,
            PARSER,
            TREE_PARSER,
            actionScope,
            actions,
            docComment,
            recognizer,
            name,
            tokens,
            tokenNames,
            rules,
            cyclicDFAs,
            bitsets,
            buildTemplate,
            buildAST,
            rewriteMode,
            profile,
            backtracking,
            synpreds,
            memoize,
            numRules,
            fileName,
            ANTLRVersion,
            generatedTimestamp,
            trace,
            scopes,
            superClass,
            literals
            ) ::=
<<
<leadIn("C source")>
*/
// [The "BSD license"]
// Copyright (c) 2005-2009 Jim Idle, Temporal Wave LLC
// http://www.temporal-wave.com
// http://www.linkedin.com/in/jimidle
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
// 1. Redistributions of source code must retain the above copyright
//    notice, this list of conditions and the following disclaimer.
// 2. Redistributions in binary form must reproduce the above copyright
//    notice, this list of conditions and the following disclaimer in the
//    documentation and/or other materials provided with the distribution.
// 3. The name of the author may not be used to endorse or promote products
//    derived from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
// IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
// OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
// IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
// NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
// THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

<if(actions.(actionScope).header)>

/* =============================================================================
 * This is what the grammar programmer asked us to put at the top of every file.
 */
<actions.(actionScope).header>
/* End of Header action.
 * =============================================================================
 */
<endif>

/* -----------------------------------------
 * Include the ANTLR3 generated header file.
 */
#include    "<name>.h"
<actions.(actionScope).postinclude>
/* ----------------------------------------- */

<docComment>

<if(literals)>
/** String literals used by <name> that we must do things like MATCHS() with.
 *  C will normally just lay down 8 bit characters, and you can use L"xxx" to
 *  get wchar_t, but wchar_t is 16 bits on Windows, which is not UTF32 and so
 *  we perform this little trick of defining the literals as arrays of UINT32
 *  and passing in the address of these.
 */
<literals:{it | static ANTLR3_UCHAR	lit_<i>[]  = <it>;}; separator="\n">

<endif>




/* MACROS that hide the C interface implementations from the
 * generated code, which makes it a little more understandable to the human eye.
 * I am very much against using C pre-processor macros for function calls and bits
 * of code as you cannot see what is happening when single stepping in debuggers
 * and so on. The exception (in my book at least) is for generated code, where you are
 * not maintaining it, but may wish to read and understand it. If you single step it, you know that input()
 * hides some indirect calls, but is always referring to the input stream. This is
 * probably more readable than ctx->input->istream->input(snarfle0->blarg) and allows me to rejig
 * the runtime interfaces without changing the generated code too often, without
 * confusing the reader of the generated output, who may not wish to know the gory
 * details of the interface inheritance.
 */

#define		CTX	ctx

/* Aids in accessing scopes for grammar programmers
 */
#undef	SCOPE_TYPE
#undef	SCOPE_STACK
#undef	SCOPE_TOP
#define	SCOPE_TYPE(scope)   p<name>_##scope##_SCOPE
#define SCOPE_STACK(scope)  p<name>_##scope##Stack
#define	SCOPE_TOP(scope)    ctx->p<name>_##scope##Top
#define	SCOPE_SIZE(scope)		ctx->p<name>_##scope##Stack_limit
#define SCOPE_INSTANCE(scope, i)	(ctx->SCOPE_STACK(scope)->get(ctx->SCOPE_STACK(scope),i))

<if(LEXER)>

/* Macros for accessing things in a lexer
 */
#undef	    LEXER
#undef	    RECOGNIZER
#undef	    RULEMEMO
#undef	    GETCHARINDEX
#undef	    GETLINE
#undef	    GETCHARPOSITIONINLINE
#undef	    EMIT
#undef	    EMITNEW
#undef	    MATCHC
#undef	    MATCHS
#undef	    MATCHRANGE
#undef	    LTOKEN
#undef	    HASFAILED
#undef	    FAILEDFLAG
#undef	    INPUT
#undef	    STRSTREAM
#undef	    LA
#undef	    HASEXCEPTION
#undef	    EXCEPTION
#undef	    CONSTRUCTEX
#undef	    CONSUME
#undef	    LRECOVER
#undef	    MARK
#undef	    REWIND
#undef	    REWINDLAST
#undef	    BACKTRACKING
#undef		MATCHANY
#undef		MEMOIZE
#undef		HAVEPARSEDRULE
#undef		GETTEXT
#undef		INDEX
#undef		SEEK
#undef		PUSHSTREAM
#undef		POPSTREAM
#undef		SETTEXT
#undef		SETTEXT8

#define	    LEXER					ctx->pLexer
#define	    RECOGNIZER			    LEXER->rec
#define		LEXSTATE				RECOGNIZER->state
#define		TOKSOURCE				LEXSTATE->tokSource
#define	    GETCHARINDEX()			LEXER->getCharIndex(LEXER)
#define	    GETLINE()				LEXER->getLine(LEXER)
#define	    GETTEXT()				LEXER->getText(LEXER)
#define	    GETCHARPOSITIONINLINE() LEXER->getCharPositionInLine(LEXER)
#define	    EMIT()					LEXSTATE->type = _type; LEXER->emit(LEXER)
#define	    EMITNEW(t)				LEXER->emitNew(LEXER, t)
#define	    MATCHC(c)				LEXER->matchc(LEXER, c)
#define	    MATCHS(s)				LEXER->matchs(LEXER, s)
#define	    MATCHRANGE(c1,c2)	    LEXER->matchRange(LEXER, c1, c2)
#define	    MATCHANY()				LEXER->matchAny(LEXER)
#define	    LTOKEN  				LEXSTATE->token
#define	    HASFAILED()				(LEXSTATE->failed == ANTLR3_TRUE)
#define	    BACKTRACKING			LEXSTATE->backtracking
#define	    FAILEDFLAG				LEXSTATE->failed
#define	    INPUT					LEXER->input
#define	    STRSTREAM				INPUT
#define		ISTREAM					INPUT->istream
#define		INDEX()					ISTREAM->index(ISTREAM)
#define		SEEK(n)					ISTREAM->seek(ISTREAM, n)
#define	    EOF_TOKEN				&(LEXSTATE->tokSource->eofToken)
#define	    HASEXCEPTION()			(LEXSTATE->error == ANTLR3_TRUE)
#define	    EXCEPTION				LEXSTATE->exception
#define	    CONSTRUCTEX()			RECOGNIZER->exConstruct(RECOGNIZER)
#define	    LRECOVER()				LEXER->recover(LEXER)
#define	    MARK()					ISTREAM->mark(ISTREAM)
#define	    REWIND(m)				ISTREAM->rewind(ISTREAM, m)
#define	    REWINDLAST()			ISTREAM->rewindLast(ISTREAM)
#define		MEMOIZE(ri,si)			RECOGNIZER->memoize(RECOGNIZER, ri, si)
#define		HAVEPARSEDRULE(r)		RECOGNIZER->alreadyParsedRule(RECOGNIZER, r)
#define		PUSHSTREAM(str)			LEXER->pushCharStream(LEXER, str)
#define		POPSTREAM()				LEXER->popCharStream(LEXER)
#define		SETTEXT(str)			LEXSTATE->text = str
#define		SKIP()					LEXSTATE->token = &(TOKSOURCE->skipToken)
#define		USER1					LEXSTATE->user1
#define		USER2					LEXSTATE->user2
#define		USER3					LEXSTATE->user3
#define		CUSTOM					LEXSTATE->custom
#define		RULEMEMO				LEXSTATE->ruleMemo
#define		DBG						RECOGNIZER->debugger

/* If we have been told we can rely on the standard 8 bit or UTF16 input
 * stream, then we can define our macros to use the direct pointers
 * in the input object, which is much faster than indirect calls. This
 * is really only significant to lexers with a lot of fragment rules (which
 * do not place LA(1) in a temporary at the moment) and even then
 * only if there is a lot of input (order of say 1M or so).
 */
#if	defined(ANTLR3_INLINE_INPUT_8BIT) || defined(ANTLR3_INLINE_INPUT_UTF16)

# ifdef	ANTLR3_INLINE_INPUT_8BIT

/* 8 bit character set */

#  define	    NEXTCHAR	((pANTLR3_UINT8)(INPUT->nextChar))
#  define	    DATAP	((pANTLR3_UINT8)(INPUT->data))

# else

#  define	    NEXTCHAR	((pANTLR3_UINT16)(INPUT->nextChar))
#  define	    DATAP	((pANTLR3_UINT16)(INPUT->data))

# endif

# define	    LA(n) ((NEXTCHAR + n) > (DATAP + INPUT->sizeBuf) ? ANTLR3_CHARSTREAM_EOF : (ANTLR3_UCHAR)(*(NEXTCHAR + n - 1)))
# define            CONSUME()                                           \\
{                                                                       \\
    if        (NEXTCHAR \< (DATAP + INPUT->sizeBuf))                     \\
    {                                                                   \\
        INPUT->charPositionInLine++;                                    \\
        if  ((ANTLR3_UCHAR)(*NEXTCHAR) == INPUT->newlineChar)           \\
        {                                                               \\
            INPUT->line++;                                              \\
            INPUT->charPositionInLine        = 0;                       \\
            INPUT->currentLine                = (void *)(NEXTCHAR + 1); \\
        }                                                               \\
        INPUT->nextChar = (void *)(NEXTCHAR + 1);                       \\
    }                                                                   \\
}

#else

// Pick up the input character by calling the input stream implementation.
//
#define	    CONSUME()   INPUT->istream->consume(INPUT->istream)
#define	    LA(n)       INPUT->istream->_LA(INPUT->istream, n)

#endif
<endif>

<if(PARSER)>
/* Macros for accessing things in the parser
 */

#undef	    PARSER
#undef	    RECOGNIZER
#undef	    HAVEPARSEDRULE
#undef		MEMOIZE
#undef	    INPUT
#undef	    STRSTREAM
#undef	    HASEXCEPTION
#undef	    EXCEPTION
#undef	    MATCHT
#undef	    MATCHANYT
#undef	    FOLLOWSTACK
#undef	    FOLLOWPUSH
#undef	    FOLLOWPOP
#undef	    PRECOVER
#undef	    PREPORTERROR
#undef	    LA
#undef	    LT
#undef	    CONSTRUCTEX
#undef	    CONSUME
#undef	    MARK
#undef	    REWIND
#undef	    REWINDLAST
#undef	    PERRORRECOVERY
#undef	    HASFAILED
#undef	    FAILEDFLAG
#undef	    RECOVERFROMMISMATCHEDSET
#undef	    RECOVERFROMMISMATCHEDELEMENT
#undef		INDEX
#undef      ADAPTOR
#undef		SEEK
#undef	    RULEMEMO
#undef		DBG

#define	    PARSER				ctx->pParser
#define	    RECOGNIZER				PARSER->rec
#define	    PSRSTATE				RECOGNIZER->state
#define	    HAVEPARSEDRULE(r)			RECOGNIZER->alreadyParsedRule(RECOGNIZER, r)
#define	    MEMOIZE(ri,si)			RECOGNIZER->memoize(RECOGNIZER, ri, si)
#define	    INPUT				PARSER->tstream
#define	    STRSTREAM				INPUT
#define	    ISTREAM				INPUT->istream
#define	    INDEX()				ISTREAM->index(INPUT->istream)
#define	    HASEXCEPTION()			(PSRSTATE->error == ANTLR3_TRUE)
#define	    EXCEPTION				PSRSTATE->exception
#define	    MATCHT(t, fs)			RECOGNIZER->match(RECOGNIZER, t, fs)
#define	    MATCHANYT()				RECOGNIZER->matchAny(RECOGNIZER)
#define	    FOLLOWSTACK				PSRSTATE->following
#ifdef  SKIP_FOLLOW_SETS
#define	    FOLLOWPUSH(x)
#define	    FOLLOWPOP()
#else
#define	    FOLLOWPUSH(x)			FOLLOWSTACK->push(FOLLOWSTACK, ((void *)(&(x))), NULL)
#define	    FOLLOWPOP()				FOLLOWSTACK->pop(FOLLOWSTACK)
#endif
#define	    PRECOVER()				RECOGNIZER->recover(RECOGNIZER)
#define	    PREPORTERROR()			RECOGNIZER->reportError(RECOGNIZER)
#define	    LA(n)				INPUT->istream->_LA(ISTREAM, n)
#define	    LT(n)				INPUT->_LT(INPUT, n)
#define	    CONSTRUCTEX()			RECOGNIZER->exConstruct(RECOGNIZER)
#define	    CONSUME()				ISTREAM->consume(ISTREAM)
#define	    MARK()				ISTREAM->mark(ISTREAM)
#define	    REWIND(m)				ISTREAM->rewind(ISTREAM, m)
#define	    REWINDLAST()			ISTREAM->rewindLast(ISTREAM)
#define	    SEEK(n)				ISTREAM->seek(ISTREAM, n)
#define	    PERRORRECOVERY			PSRSTATE->errorRecovery
#define	    FAILEDFLAG				PSRSTATE->failed
#define	    HASFAILED()				(FAILEDFLAG == ANTLR3_TRUE)
#define	    BACKTRACKING			PSRSTATE->backtracking
#define	    RECOVERFROMMISMATCHEDSET(s)		RECOGNIZER->recoverFromMismatchedSet(RECOGNIZER, s)
#define	    RECOVERFROMMISMATCHEDELEMENT(e)	RECOGNIZER->recoverFromMismatchedElement(RECOGNIZER, s)
#define     ADAPTOR                         ctx->adaptor
#define		RULEMEMO						PSRSTATE->ruleMemo
#define		DBG								RECOGNIZER->debugger

<endif>

<if(TREE_PARSER)>
/* Macros for accessing things in the parser
 */

#undef	    PARSER
#undef	    RECOGNIZER
#undef	    HAVEPARSEDRULE
#undef	    INPUT
#undef	    STRSTREAM
#undef	    HASEXCEPTION
#undef	    EXCEPTION
#undef	    MATCHT
#undef	    MATCHANYT
#undef	    FOLLOWSTACK
#undef	    FOLLOWPUSH
#undef	    FOLLOWPOP
#undef	    PRECOVER
#undef	    PREPORTERROR
#undef	    LA
#undef	    LT
#undef	    CONSTRUCTEX
#undef	    CONSUME
#undef	    MARK
#undef	    REWIND
#undef	    REWINDLAST
#undef	    PERRORRECOVERY
#undef	    HASFAILED
#undef	    FAILEDFLAG
#undef	    RECOVERFROMMISMATCHEDSET
#undef	    RECOVERFROMMISMATCHEDELEMENT
#undef	    BACKTRACKING
#undef      ADAPTOR
#undef	    RULEMEMO
#undef		SEEK
#undef		INDEX
#undef		DBG

#define	    PARSER							ctx->pTreeParser
#define	    RECOGNIZER						PARSER->rec
#define		PSRSTATE						RECOGNIZER->state
#define	    HAVEPARSEDRULE(r)				RECOGNIZER->alreadyParsedRule(RECOGNIZER, r)
#define	    INPUT							PARSER->ctnstream
#define		ISTREAM							INPUT->tnstream->istream
#define	    STRSTREAM						INPUT->tnstream
#define	    HASEXCEPTION()					(PSRSTATE->error == ANTLR3_TRUE)
#define	    EXCEPTION						PSRSTATE->exception
#define	    MATCHT(t, fs)					RECOGNIZER->match(RECOGNIZER, t, fs)
#define	    MATCHANYT()						RECOGNIZER->matchAny(RECOGNIZER)
#define	    FOLLOWSTACK					    PSRSTATE->following
#define	    FOLLOWPUSH(x)					FOLLOWSTACK->push(FOLLOWSTACK, ((void *)(&(x))), NULL)
#define	    FOLLOWPOP()						FOLLOWSTACK->pop(FOLLOWSTACK)
#define	    PRECOVER()						RECOGNIZER->recover(RECOGNIZER)
#define	    PREPORTERROR()					RECOGNIZER->reportError(RECOGNIZER)
#define	    LA(n)							ISTREAM->_LA(ISTREAM, n)
#define	    LT(n)							INPUT->tnstream->_LT(INPUT->tnstream, n)
#define	    CONSTRUCTEX()					RECOGNIZER->exConstruct(RECOGNIZER)
#define	    CONSUME()						ISTREAM->consume(ISTREAM)
#define	    MARK()							ISTREAM->mark(ISTREAM)
#define	    REWIND(m)						ISTREAM->rewind(ISTREAM, m)
#define	    REWINDLAST()					ISTREAM->rewindLast(ISTREAM)
#define	    PERRORRECOVERY					PSRSTATE->errorRecovery
#define	    FAILEDFLAG						PSRSTATE->failed
#define	    HASFAILED()						(FAILEDFLAG == ANTLR3_TRUE)
#define	    BACKTRACKING					PSRSTATE->backtracking
#define	    RECOVERFROMMISMATCHEDSET(s)		RECOGNIZER->recoverFromMismatchedSet(RECOGNIZER, s)
#define	    RECOVERFROMMISMATCHEDELEMENT(e)	RECOGNIZER->recoverFromMismatchedElement(RECOGNIZER, s)
#define     ADAPTOR                         INPUT->adaptor
#define		RULEMEMO						PSRSTATE->ruleMemo
#define		SEEK(n)							ISTREAM->seek(ISTREAM, n)
#define		INDEX()							ISTREAM->index(ISTREAM)
#define		DBG								RECOGNIZER->debugger


<endif>

#define		TOKTEXT(tok, txt)				tok, (pANTLR3_UINT8)txt

/* The 4 tokens defined below may well clash with your own #defines or token types. If so
 * then for the present you must use different names for your defines as these are hard coded
 * in the code generator. It would be better not to use such names internally, and maybe
 * we can change this in a forthcoming release. I deliberately do not #undef these
 * here as this will at least give you a redefined error somewhere if they clash.
 */
#define	    UP	    ANTLR3_TOKEN_UP
#define	    DOWN    ANTLR3_TOKEN_DOWN
#define	    EOR	    ANTLR3_TOKEN_EOR
#define	    INVALID ANTLR3_TOKEN_INVALID


/* =============================================================================
 * Functions to create and destroy scopes. First come the rule scopes, followed
 * by the global declared scopes.
 */

<rules: {r |<if(r.ruleDescriptor.ruleScope)>
<ruleAttributeScopeFuncDecl(scope=r.ruleDescriptor.ruleScope)>
<ruleAttributeScopeFuncs(scope=r.ruleDescriptor.ruleScope)>
<endif>}>

<recognizer.scopes:{it | <if(it.isDynamicGlobalScope)>
<globalAttributeScopeFuncDecl(it)>
<globalAttributeScopeFuncs(it)>
<endif>}>

/* ============================================================================= */

/* =============================================================================
 * Start of recognizer
 */

<recognizer>

/* End of code
 * =============================================================================
 */

>>
headerFileExtension() ::= ".h"

headerFile( LEXER,
            PARSER,
            TREE_PARSER,
            actionScope,
            actions,
            docComment,
            recognizer,
            name,
            tokens,
            tokenNames,
            rules,
            cyclicDFAs,
            bitsets,
            buildTemplate,
            buildAST,
            rewriteMode,
            profile,
            backtracking,
            synpreds,
            memoize,
            numRules,
            fileName,
            ANTLRVersion,
            generatedTimestamp,
            trace,
            scopes,
			superClass,
            literals
        ) ::=
<<
<leadIn("C header")>
<if(PARSER)>
 * The parser <mainName()>
<endif>
<if(LEXER)>
 * The lexer <mainName()>
<endif>
<if(TREE_PARSER)>
 * The tree parser <mainName()>
<endif>
has the callable functions (rules) shown below,
 * which will invoke the code for the associated rule in the source grammar
 * assuming that the input stream is pointing to a token/text stream that could begin
 * this rule.
 *
 * For instance if you call the first (topmost) rule in a parser grammar, you will
 * get the results of a full parse, but calling a rule half way through the grammar will
 * allow you to pass part of a full token stream to the parser, such as for syntax checking
 * in editors and so on.
 *
 * The parser entry points are called indirectly (by function pointer to function) via
 * a parser context typedef p<name>, which is returned from a call to <name>New().
 *
<if(LEXER)>
 * As this is a generated lexer, it is unlikely you will call it 'manually'. However
 * the methods are provided anyway.
 *
<endif>
 * The methods in p<name> are  as follows:
 *
 * <rules:{r | <if(!r.ruleDescriptor.isSynPred)> - <headerReturnType(ruleDescriptor=r.ruleDescriptor,...)>      p<name>-><r.ruleDescriptor.name>(p<name>)<endif>}; separator="\n * ">
 *
 * The return type for any particular rule is of course determined by the source
 * grammar file.
 */
// [The "BSD license"]
// Copyright (c) 2005-2009 Jim Idle, Temporal Wave LLC
// http://www.temporal-wave.com
// http://www.linkedin.com/in/jimidle
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
// 1. Redistributions of source code must retain the above copyright
//    notice, this list of conditions and the following disclaimer.
// 2. Redistributions in binary form must reproduce the above copyright
//    notice, this list of conditions and the following disclaimer in the
//    documentation and/or other materials provided with the distribution.
// 3. The name of the author may not be used to endorse or promote products
//    derived from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
// IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
// OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
// IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
// NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
// THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

#ifndef	_<name>_H
#define _<name>_H
<actions.(actionScope).preincludes>
/* =============================================================================
 * Standard antlr3 C runtime definitions
 */
#include    \<antlr3.h>

/* End of standard antlr 3 runtime definitions
 * =============================================================================
 */
<actions.(actionScope).includes>

#ifdef __cplusplus
extern "C" {
#endif

// Forward declare the context typedef so that we can use it before it is
// properly defined. Delegators and delegates (from import statements) are
// interdependent and their context structures contain pointers to each other
// C only allows such things to be declared if you pre-declare the typedef.
//
typedef struct <name>_Ctx_struct <name>, * p<name>;

<if(recognizer.grammar.delegates)>
// Include delegate definition header files
//
<recognizer.grammar.delegates: {g|#include	\<<g.recognizerName>.h>}; separator="\n">

<endif>


<actions.(actionScope).header>

#ifdef	ANTLR3_WINDOWS
// Disable: Unreferenced parameter,							- Rules with parameters that are not used
//          constant conditional,							- ANTLR realizes that a prediction is always true (synpred usually)
//          initialized but unused variable					- tree rewrite variables declared but not needed
//          Unreferenced local variable						- lexer rule declares but does not always use _type
//          potentially unitialized variable used			- retval always returned from a rule
//			unreferenced local function has been removed	- susually getTokenNames or freeScope, they can go without warnigns
//
// These are only really displayed at warning level /W4 but that is the code ideal I am aiming at
// and the codegen must generate some of these warnings by necessity, apart from 4100, which is
// usually generated when a parser rule is given a parameter that it does not use. Mostly though
// this is a matter of orthogonality hence I disable that one.
//
#pragma warning( disable : 4100 )
#pragma warning( disable : 4101 )
#pragma warning( disable : 4127 )
#pragma warning( disable : 4189 )
#pragma warning( disable : 4505 )
#pragma warning( disable : 4701 )
#endif
<if(backtracking)>

/* ========================
 * BACKTRACKING IS ENABLED
 * ========================
 */
<endif>

<rules:{r |<headerReturnScope(ruleDescriptor=r.ruleDescriptor,...)>}>

<scopes:{it | <if(it.isDynamicGlobalScope)><globalAttributeScopeDecl(it)><endif>}>
<rules:{r |<ruleAttributeScopeDecl(scope=r.ruleDescriptor.ruleScope)>}>
<if(recognizer.grammar.delegators)>
// Include delegator definition header files
//
<recognizer.grammar.delegators: {g|#include	\<<g.recognizerName>.h>}; separator="\n">

<endif>

/** Context tracking structure for <mainName()>
 */
struct <name>_Ctx_struct
{
    /** Built in ANTLR3 context tracker contains all the generic elements
     *  required for context tracking.
     */
<if(PARSER)>
    pANTLR3_PARSER   pParser;
<endif>
<if(LEXER)>
    pANTLR3_LEXER    pLexer;
<endif>
<if(TREE_PARSER)>
    pANTLR3_TREE_PARSER	    pTreeParser;
<endif>

<if(recognizer.grammar.delegates)>
	<recognizer.grammar.delegates:
         {g|p<g.recognizerName>	<g:delegateName()>;}; separator="\n">
<endif>
<if(recognizer.grammar.delegators)>
	<recognizer.grammar.delegators:
         {g|p<g.recognizerName>	<g:delegateName()>;}; separator="\n">
<endif>
<scopes:{it | <if(it.isDynamicGlobalScope)>
    <globalAttributeScopeDef(it)>
<endif>}; separator="\n\n">
<rules: {r |<if(r.ruleDescriptor.ruleScope)>
    <ruleAttributeScopeDef(scope=r.ruleDescriptor.ruleScope)>
<endif>}>

<if(LEXER)>
    <rules:{r | <if(!r.ruleDescriptor.isSynPred)><headerReturnType(ruleDescriptor=r.ruleDescriptor)> (*m<r.ruleDescriptor.name>)	(struct <name>_Ctx_struct * ctx<if(r.ruleDescriptor.parameterScope)>, <endif><r.ruleDescriptor.parameterScope:parameterScope()>);<endif>}; separator="\n">
<endif>
<if(!LEXER)>
    <rules:{r | <headerReturnType(ruleDescriptor=r.ruleDescriptor)> (*<r.ruleDescriptor.name>)	(struct <name>_Ctx_struct * ctx<if(r.ruleDescriptor.parameterScope)>, <endif><r.ruleDescriptor.parameterScope:parameterScope()>);}; separator="\n">
<! generate rule/method definitions for imported rules so they
   appear to be defined in this recognizer. !>
    // Delegated rules
<recognizer.grammar.delegatedRules:{ruleDescriptor|
    <headerReturnType(ruleDescriptor)> (*<ruleDescriptor.name>)(struct <name>_Ctx_struct * ctx<if(ruleDescriptor.parameterScope)>, <endif><ruleDescriptor.parameterScope:parameterScope()>);}; separator="\n">
<endif>

    const char * (*getGrammarFileName)();
    void            (*reset)  (struct <name>_Ctx_struct * ctx);
    void	    (*free)   (struct <name>_Ctx_struct * ctx);
    <@members>
    <@end>
    <actions.(actionScope).context>
};

// Function protoypes for the constructor functions that external translation units
// such as delegators and delegates may wish to call.
//
ANTLR3_API p<name> <name>New         (<inputType()> instream<recognizer.grammar.delegators:{g|, p<g.recognizerName> <g:delegateName()>}>);
ANTLR3_API p<name> <name>NewSSD      (<inputType()> instream, pANTLR3_RECOGNIZER_SHARED_STATE state<recognizer.grammar.delegators:{g|, p<g.recognizerName> <g:delegateName()>}>);
<if(!recognizer.grammar.grammarIsRoot)>
extern pANTLR3_UINT8   <recognizer.grammar.composite.rootGrammar.recognizerName>TokenNames[];
<endif>


/** Symbolic definitions of all the tokens that the <grammarType()> will work with.
 * \{
 *
 * Antlr will define EOF, but we can't use that as it it is too common in
 * in C header files and that would be confusing. There is no way to filter this out at the moment
 * so we just undef it here for now. That isn't the value we get back from C recognizers
 * anyway. We are looking for ANTLR3_TOKEN_EOF.
 */
#ifdef	EOF
#undef	EOF
#endif
#ifdef	Tokens
#undef	Tokens
#endif
<tokens:{it | #define <it.name>      <it.type>}; separator="\n">
#ifdef	EOF
#undef	EOF
#define	EOF	ANTLR3_TOKEN_EOF
#endif

#ifndef TOKENSOURCE
#define TOKENSOURCE(lxr) lxr->pLexer->rec->state->tokSource
#endif

/* End of token definitions for <name>
 * =============================================================================
 */
/** \} */

#ifdef __cplusplus
}
#endif

#endif

/* END - Note:Keep extra line feed to satisfy UNIX systems */

>>

inputType() ::=<<
<if(LEXER)>
pANTLR3_INPUT_STREAM
<endif>
<if(PARSER)>
pANTLR3_COMMON_TOKEN_STREAM
<endif>
<if(TREE_PARSER)>
pANTLR3_COMMON_TREE_NODE_STREAM
<endif>
>>

grammarType() ::= <<
<if(PARSER)>
parser
<endif>
<if(LEXER)>
lexer
<endif>
<if(TREE_PARSER)>
tree parser
<endif>
>>

mainName() ::= <<
<if(PARSER)>
<name>
<endif>
<if(LEXER)>
<name>
<endif>
<if(TREE_PARSER)>
<name>
<endif>
>>

headerReturnScope(ruleDescriptor) ::= "<returnScope(...)>"

headerReturnType(ruleDescriptor) ::= <<
<if(LEXER)>
<if(!ruleDescriptor.isSynPred)>
 void
<else>
 <returnType()>
<endif>
<else>
 <returnType()>
<endif>
>>

// Produce the lexer output
//
lexer(  grammar,
		name,
        tokens,
        scopes,
        rules,
        numRules,
        filterMode,
        superClass,
        labelType="pANTLR3_COMMON_TOKEN") ::= <<

<if(filterMode)>
/* Forward declare implementation function for ANTLR3_TOKEN_SOURCE interface when
 * this is a filter mode lexer.
 */
static pANTLR3_COMMON_TOKEN <name>NextToken   (pANTLR3_TOKEN_SOURCE toksource);

/* Override the normal MEMOIZE and HAVEALREADYPARSED macros as this is a filtering
 * lexer. In filter mode, the memoizing and backtracking are gated at BACKTRACKING > 1 rather
 * than just BACKTRACKING. In some cases this might generate code akin to:
 *   if (BACKTRACKING) if (BACKTRACKING > 1) memoize.
 * However, I assume that the C compilers/optimizers are smart enough to work this one out
 * these days - Jim
 */
#undef		MEMOIZE
#define		MEMOIZE(ri,si)			if (BACKTRACKING>1) { RECOGNIZER->memoize(RECOGNIZER, ri, si) }
#undef		HAVEPARSEDRULE
#define		HAVEPARSEDRULE(r)		if (BACKTRACKING>1) { RECOGNIZER->alreadyParsedRule(RECOGNIZER, r) }
<endif>

/* Forward declare the locally static matching functions we have generated and any predicate functions.
 */
<rules:{r | static ANTLR3_INLINE <headerReturnType(ruleDescriptor=r.ruleDescriptor)>	<if(!r.ruleDescriptor.isSynPred)>m<endif><r.ruleDescriptor.name>    (p<name> ctx<if(r.ruleDescriptor.parameterScope)>, <endif><r.ruleDescriptor.parameterScope:parameterScope()>);}; separator="\n">
static void	<name>Free(p<name> ctx);

/* =========================================================================
 * Lexer matching rules end.
 * =========================================================================
 */

<scopes:{it |<if(it.isDynamicGlobalScope)><globalAttributeScope(it)><endif>}>

<actions.lexer.members>

static void
<name>Free  (p<name> ctx)
{
<if(memoize)>
	if	(RULEMEMO != NULL)
	{
		RULEMEMO->free(RULEMEMO);
		RULEMEMO = NULL;
	}
<endif>
<if(grammar.directDelegates)>
	// Free the lexers that we delegated to
	// functions to. NULL the state so we only free it once.
	//
	<grammar.directDelegates:
         {g|ctx-><g:delegateName()>->pLexer->rec->state = NULL;
         ctx-><g:delegateName()>->free(ctx-><g:delegateName()>);}; separator="\n">
<endif>
    LEXER->free(LEXER);

    ANTLR3_FREE(ctx);
}

static void
<name>Reset (p<name> ctx)
{
    RECOGNIZER->reset(RECOGNIZER);
}

/** \brief Name of the grammar file that generated this code
 */
static const char fileName[] = "<fileName>";

/** \brief Return the name of the grammar file that generated this code.
 */
static const char * getGrammarFileName()
{
	return fileName;
}

<if(filterMode)>
    <filteringNextToken()>
<endif>

/** \brief Create a new lexer called <name>
 *
 * \param[in]    instream Pointer to an initialized input stream
 * \return
 *     - Success p<name> initialized for the lex start
 *     - Fail NULL
 */
ANTLR3_API p<name> <name>New
(<inputType()> instream<grammar.delegators:{g|, p<g.recognizerName> <g:delegateName()>}>)
{
	// See if we can create a new lexer with the standard constructor
	//
	return <name>NewSSD(instream, NULL<grammar.delegators:{g|, <g:delegateName()>}>);
}

/** \brief Create a new lexer called <name>
 *
 * \param[in]    instream Pointer to an initialized input stream
 * \param[state] state Previously created shared recognizer stat
 * \return
 *     - Success p<name> initialized for the lex start
 *     - Fail NULL
 */
ANTLR3_API p<name> <name>NewSSD
(pANTLR3_INPUT_STREAM instream, pANTLR3_RECOGNIZER_SHARED_STATE state<grammar.delegators:{g|, p<g.recognizerName> <g:delegateName()>}>)
{
    p<name> ctx; // Context structure we will build and return

    ctx = (p<name>) ANTLR3_CALLOC(1, sizeof(<name>));

    if  (ctx == NULL)
    {
        // Failed to allocate memory for lexer context
        return  NULL;
    }

    /* -------------------------------------------------------------------
     * Memory for basic structure is allocated, now to fill in
     * in base ANTLR3 structures. We initialize the function pointers
     * for the standard ANTLR3 lexer function set, but upon return
     * from here, the programmer may set the pointers to provide custom
     * implementations of each function.
     *
     * We don't use the macros defined in <name>.h here so you can get a sense
     * of what goes where.
     */

    /* Create a base lexer, using the supplied input stream
     */
    ctx->pLexer	= antlr3LexerNewStream(ANTLR3_SIZE_HINT, instream, state);

    /* Check that we allocated the memory correctly
     */
    if	(ctx->pLexer == NULL)
    {
		ANTLR3_FREE(ctx);
		return  NULL;
    }
<if(memoize)>
<if(grammar.grammarIsRoot)>
    // Create a LIST for recording rule memos.
    //
    ctx->pLexer->rec->ruleMemo    = antlr3IntTrieNew(15);	/* 16 bit depth is enough for 32768 rules! */
<endif>
<endif>

    /* Install the implementation of our <name> interface
     */
    <rules:{r | <if(!r.ruleDescriptor.isSynPred)>ctx->m<r.ruleDescriptor.name>	= m<r.ruleDescriptor.name>;<endif>}; separator="\n">

    /** When the nextToken() call is made to this lexer's pANTLR3_TOKEN_SOURCE
     *  it will call mTokens() in this generated code, and will pass it the ctx
     * pointer of this lexer, not the context of the base lexer, so store that now.
     */
    ctx->pLexer->ctx	    = ctx;

    /**Install the token matching function
     */
    ctx->pLexer->mTokens = (void (*) (void *))(mTokens);

    ctx->getGrammarFileName	= getGrammarFileName;
    ctx->free		= <name>Free;
    ctx->reset          = <name>Reset;

<if(grammar.directDelegates)>
	// Initialize the lexers that we are going to delegate some
	// functions to.
	//
	<grammar.directDelegates:
         {g|ctx-><g:delegateName()> = <g.recognizerName>NewSSD(instream, ctx->pLexer->rec->state, ctx<grammar.delegators:{g|, <g:delegateName()>}>);}; separator="\n">
<endif>
<if(grammar.delegators)>
	// Install the pointers back to lexers that will delegate us to perform certain functions
	// for them.
	//
	<grammar.delegators:
         {g|ctx-><g:delegateName()>			= <g:delegateName()>;}; separator="\n">
<endif>
<if(filterMode)>
    /* We have filter mode turned on, so install the filtering nextToken function
     */
    ctx->pLexer->rec->state->tokSource->nextToken = <name>NextToken;
<endif>
	 <actions.lexer.apifuncs>

    /* Return the newly built lexer to the caller
     */
    return  ctx;
}
<if(cyclicDFAs)>

/* =========================================================================
 * DFA tables for the lexer
 */
<cyclicDFAs:cyclicDFA()> <! dump tables for all DFA !>
/* =========================================================================
 * End of DFA tables for the lexer
 */
<endif>

/* =========================================================================
 * Functions to match the lexer grammar defined tokens from the input stream
 */

<rules; separator="\n\n">

/* =========================================================================
 * Lexer matching rules end.
 * =========================================================================
 */
<if(synpreds)>

/* =========================================================================
 * Lexer syntactic predicates
 */
<synpreds:{p | <lexerSynpred(predname=p)>}>
/* =========================================================================
 * Lexer syntactic predicates end.
 * =========================================================================
 */
<endif>

/* End of Lexer code
 * ================================================
 * ================================================
 */

>>


filteringNextToken() ::= <<
/** An override of the lexer's nextToken() method that backtracks over mTokens() looking
 *  for matches in lexer filterMode.  No error can be generated upon error; just rewind, consume
 *  a token and then try again.  BACKTRACKING needs to be set as well.
 *  Make rule memoization happen only at levels above 1 as we start mTokens
 *  at BACKTRACKING==1.
 */
static pANTLR3_COMMON_TOKEN
<name>NextToken(pANTLR3_TOKEN_SOURCE toksource)
{
    pANTLR3_LEXER   lexer;
	pANTLR3_RECOGNIZER_SHARED_STATE state;

    lexer   = (pANTLR3_LEXER)(toksource->super);
    state	= lexer->rec->state;

    /* Get rid of any previous token (token factory takes care of
     * any deallocation when this token is finally used up.
     */
    state		->token	    = NULL;
    state		->error	    = ANTLR3_FALSE;	    /* Start out without an exception	*/
    state		->failed    = ANTLR3_FALSE;

    /* Record the start of the token in our input stream.
     */
    state->tokenStartCharIndex			= lexer->input->istream->index(lexer->input->istream);
    state->tokenStartCharPositionInLine	= lexer->input->getCharPositionInLine(lexer->input);
    state->tokenStartLine				= lexer->input->getLine(lexer->input);
    state->text							= NULL;

    /* Now call the matching rules and see if we can generate a new token
     */
    for	(;;)
    {
		if  (lexer->input->istream->_LA(lexer->input->istream, 1) == ANTLR3_CHARSTREAM_EOF)
		{
			/* Reached the end of the stream, nothing more to do.
			 */
			pANTLR3_COMMON_TOKEN    teof = &(toksource->eofToken);

			teof->setStartIndex (teof, lexer->getCharIndex(lexer));
			teof->setStopIndex  (teof, lexer->getCharIndex(lexer));
			teof->setLine		(teof, lexer->getLine(lexer));
			return  teof;
		}

		state->token		= NULL;
		state->error		= ANTLR3_FALSE;	    /* Start out without an exception	*/

		{
			ANTLR3_MARKER   m;

			m						= lexer->input->istream->mark(lexer->input->istream);
			state->backtracking		= 1;				/* No exceptions */
			state->failed			= ANTLR3_FALSE;

			/* Call the generated lexer, see if it can get a new token together.
			 */
			lexer->mTokens(lexer->ctx);
    		state->backtracking	= 0;

    		<! mTokens backtracks with synpred at BACKTRACKING==2
				and we set the synpredgate to allow actions at level 1. !>

			if	(state->failed == ANTLR3_TRUE)
			{
				lexer->input->istream->rewind(lexer->input->istream, m);
				lexer->input->istream->consume(lexer->input->istream); <! advance one char and try again !>
			}
			else
			{
				lexer->emit(lexer);					/* Assemble the token and emit it to the stream */
				return	state->token;
			}
		}
    }
}
>>

actionGate() ::= "BACKTRACKING==0"

filteringActionGate() ::= "BACKTRACKING==1"

/** How to generate a parser */
genericParser(  grammar,
				name,
                scopes,
                tokens,
                tokenNames,
                rules,
                numRules,
                bitsets,
                inputStreamType,
                superClass,
                labelType,
				members,
				rewriteElementType, filterMode,
                ASTLabelType="pANTLR3_BASE_TREE"
              ) ::= <<


<if(grammar.grammarIsRoot)>
/** \brief Table of all token names in symbolic order, mainly used for
 *         error reporting.
 */
pANTLR3_UINT8   <name>TokenNames[<length(tokenNames)>+4]
     = {
        (pANTLR3_UINT8) "\<invalid>",       /* String to print to indicate an invalid token */
        (pANTLR3_UINT8) "\<EOR>",
        (pANTLR3_UINT8) "\<DOWN>",
        (pANTLR3_UINT8) "\<UP>",
        <tokenNames:{it |(pANTLR3_UINT8) <it>}; separator=",\n">
       };
<endif>

    <@members>

    <@end>
<rules:{r |<ruleAttributeScopeFuncMacro(scope=r.ruleDescriptor.ruleScope)>}>
<scopes:{it |<if(it.isDynamicGlobalScope)><globalAttributeScopeFuncMacro(it)><endif>}>

// Forward declare the locally static matching functions we have generated.
//
<rules:{r | static <headerReturnType(ruleDescriptor=r.ruleDescriptor)>	<r.ruleDescriptor.name>    (p<name> ctx<if(r.ruleDescriptor.parameterScope)>, <endif><r.ruleDescriptor.parameterScope:parameterScope()>);}; separator="\n">
static void	<name>Free(p<name> ctx);
static void     <name>Reset (p<name> ctx);

<if(!LEXER)>
<! generate rule/method definitions for imported rules so they
   appear to be defined in this recognizer. !>
<if(recognizer.grammar.delegatedRules)>
// Delegated rules
//
<recognizer.grammar.delegatedRules:{ruleDescriptor|static <headerReturnType(ruleDescriptor)> <ruleDescriptor.name>(p<name> ctx<if(ruleDescriptor.parameterScope)>, <endif><ruleDescriptor.parameterScope:parameterScope()>);}; separator="\n">

<endif>
<endif>

/* For use in tree output where we are accumulating rule labels via label += ruleRef
 * we need a function that knows how to free a return scope when the list is destroyed.
 * We cannot just use ANTLR3_FREE because in debug tracking mode, this is a macro.
 */
static	void ANTLR3_CDECL freeScope(void * scope)
{
    ANTLR3_FREE(scope);
}

/** \brief Name of the grammar file that generated this code
 */
static const char fileName[] = "<fileName>";

/** \brief Return the name of the grammar file that generated this code.
 */
static const char * getGrammarFileName()
{
	return fileName;
}
/** \brief Create a new <name> parser and return a context for it.
 *
 * \param[in] instream Pointer to an input stream interface.
 *
 * \return Pointer to new parser context upon success.
 */
ANTLR3_API p<name>
<name>New   (<inputStreamType> instream<grammar.delegators:{g|, p<g.recognizerName> <g:delegateName()>}>)
{
	// See if we can create a new parser with the standard constructor
	//
	return <name>NewSSD(instream, NULL<grammar.delegators:{g|, <g:delegateName()>}>);
}

/** \brief Create a new <name> parser and return a context for it.
 *
 * \param[in] instream Pointer to an input stream interface.
 *
 * \return Pointer to new parser context upon success.
 */
ANTLR3_API p<name>
<name>NewSSD   (<inputStreamType> instream, pANTLR3_RECOGNIZER_SHARED_STATE state<grammar.delegators:{g|, p<g.recognizerName> <g:delegateName()>}>)
{
    p<name> ctx;	    /* Context structure we will build and return   */

    ctx	= (p<name>) ANTLR3_CALLOC(1, sizeof(<name>));

    if	(ctx == NULL)
    {
		// Failed to allocate memory for parser context
		//
        return  NULL;
    }

    /* -------------------------------------------------------------------
     * Memory for basic structure is allocated, now to fill in
     * the base ANTLR3 structures. We initialize the function pointers
     * for the standard ANTLR3 parser function set, but upon return
     * from here, the programmer may set the pointers to provide custom
     * implementations of each function.
     *
     * We don't use the macros defined in <name>.h here, in order that you can get a sense
     * of what goes where.
     */

<if(PARSER)>
    /* Create a base parser/recognizer, using the supplied token stream
     */
    ctx->pParser	    = antlr3ParserNewStream(ANTLR3_SIZE_HINT, instream->tstream, state);
<endif>
<if(TREE_PARSER)>
    /* Create a base Tree parser/recognizer, using the supplied tree node stream
     */
    ctx->pTreeParser		= antlr3TreeParserNewStream(ANTLR3_SIZE_HINT, instream, state);
<endif>

    /* Install the implementation of our <name> interface
     */
    <rules:{r | ctx-><r.ruleDescriptor.name>	= <r.ruleDescriptor.name>;}; separator="\n">
<if(grammar.delegatedRules)>
	// Install the delegated methods so that they appear to be a part of this
	// parser
	//
    <grammar.delegatedRules:{ruleDescriptor | ctx-><ruleDescriptor.name>	= <ruleDescriptor.name>;}; separator="\n">
<endif>

    ctx->free			= <name>Free;
    ctx->reset			= <name>Reset;
    ctx->getGrammarFileName	= getGrammarFileName;

    /* Install the scope pushing methods.
     */
    <rules: {r |<if(r.ruleDescriptor.ruleScope)>
<ruleAttributeScope(scope=r.ruleDescriptor.ruleScope)><\n>
<endif>}>
    <recognizer.scopes:{it |<if(it.isDynamicGlobalScope)>
<globalAttributeScope(it)><\n>
<endif>}>
    <@apifuncs>

    <@end>
<if(grammar.directDelegates)>
	// Initialize the parsers that we are going to delegate some
	// functions to.
	//
	<grammar.directDelegates:
         {g|ctx-><g:delegateName()> = <g.recognizerName>NewSSD(instream, PSRSTATE, ctx<grammar.delegators:{g|, <g:delegateName()>}>);}; separator="\n">
<endif>
<if(grammar.delegators)>
	// Install the pointers back to parsers that will delegate us to perform certain functions
	// for them.
	//
	<grammar.delegators:
         {g|ctx-><g:delegateName()>			= <g:delegateName()>;}; separator="\n">
<endif>
    <actions.parser.apifuncs>
    <actions.treeparser.apifuncs>
<if(memoize)>
<if(grammar.grammarIsRoot)>
    /* Create a LIST for recording rule memos.
     */
     RULEMEMO    = antlr3IntTrieNew(15);	/* 16 bit depth is enough for 32768 rules! */<\n>
<endif>
<endif>
    /* Install the token table
     */
    PSRSTATE->tokenNames   = <grammar.composite.rootGrammar.recognizerName>TokenNames;

    <@debugStuff()>

    /* Return the newly built parser to the caller
     */
    return  ctx;
}

static void
<name>Reset (p<name> ctx)
{
    RECOGNIZER->reset(RECOGNIZER);
}

/** Free the parser resources
 */
 static void
 <name>Free(p<name> ctx)
 {
    /* Free any scope memory
     */
    <rules: {r |<if(r.ruleDescriptor.ruleScope)><ruleAttributeScopeFree(scope=r.ruleDescriptor.ruleScope)><\n><endif>}>
    <recognizer.scopes:{it |<if(it.isDynamicGlobalScope)><globalAttributeScopeFree(it)><\n><endif>}>

    <@cleanup>
    <@end>
<if(grammar.directDelegates)>
	// Free the parsers that we delegated to
	// functions to.NULL the state so we only free it once.
	//
	<grammar.directDelegates:
         {g| ctx-><g:delegateName()>-><if(TREE_PARSER)>pTreeParser<else>pParser<endif>->rec->state = NULL;
         ctx-><g:delegateName()>->free(ctx-><g:delegateName()>);}; separator="\n">
<endif>
<if(memoize)>
<if(grammar.grammarIsRoot)>
	if	(RULEMEMO != NULL)
	{
		RULEMEMO->free(RULEMEMO);
		RULEMEMO = NULL;
	}
<endif>
<endif>
	// Free this parser
	//
<if(TREE_PARSER)>
    ctx->pTreeParser->free(ctx->pTreeParser);<\n>
<else>
    ctx->pParser->free(ctx->pParser);<\n>
<endif>

    ANTLR3_FREE(ctx);

    /* Everything is released, so we can return
     */
    return;
 }

/** Return token names used by this <grammarType()>
 *
 * The returned pointer is used as an index into the token names table (using the token
 * number as the index).
 *
 * \return Pointer to first char * in the table.
 */
static pANTLR3_UINT8    *getTokenNames()
{
        return <grammar.composite.rootGrammar.recognizerName>TokenNames;
}

    <members>

/* Declare the bitsets
 */
<bitsets:{it | <bitsetDeclare(name={FOLLOW_<it.name>_in_<it.inName><it.tokenIndex>},
                    words64=it.bits)>}>


<if(cyclicDFAs)>

/* =========================================================================
 * DFA tables for the parser
 */
<cyclicDFAs:cyclicDFA()> <! dump tables for all DFA !>
/* =========================================================================
 * End of DFA tables for the parser
 */
<endif>

/* ==============================================
 * Parsing rules
 */
<rules; separator="\n\n">
<if(grammar.delegatedRules)>
	// Delegated methods that appear to be a part of this
	// parser
	//
<grammar.delegatedRules:{ruleDescriptor|
    <returnType()> <ruleDescriptor.name>(p<name> ctx<if(ruleDescriptor.parameterScope.attributes)>, <endif><ruleDescriptor.parameterScope:parameterScope()>)
    \{
        <if(ruleDescriptor.hasReturnValue)>return <endif>ctx-><ruleDescriptor.grammar:delegateName()>-><ruleDescriptor.name>(ctx-><ruleDescriptor.grammar:delegateName()><if(ruleDescriptor.parameterScope.attributes)>, <endif><ruleDescriptor.parameterScope.attributes:{a|<a.name>}; separator=", ">);
	\}}; separator="\n">

<endif>
/* End of parsing rules
 * ==============================================
 */

/* ==============================================
 * Syntactic predicates
 */
<synpreds:{p | <synpred(predname=p)>}>
/* End of syntactic predicates
 * ==============================================
 */





>>

parser(	grammar,
		name,
		scopes,
		tokens,
		tokenNames,
		rules,
		numRules,
		bitsets,
		ASTLabelType,
		superClass="Parser",
		labelType="pANTLR3_COMMON_TOKEN",
		members={<actions.parser.members>}
		) ::= <<
<genericParser(inputStreamType="pANTLR3_COMMON_TOKEN_STREAM", rewriteElementType="TOKEN", ...)>
>>

/** How to generate a tree parser; same as parser except the input
 *  stream is a different type.
 */
treeParser(	grammar,
			name,
			scopes,
			tokens,
			tokenNames,
			globalAction,
			rules,
			numRules,
			bitsets,
			filterMode,
			labelType={<ASTLabelType>},
			ASTLabelType="pANTLR3_BASE_TREE",
			superClass="TreeParser",
			members={<actions.treeparser.members>}
			) ::= <<
<genericParser(inputStreamType="pANTLR3_COMMON_TREE_NODE_STREAM", rewriteElementType="NODE", ...)>
>>

/** A simpler version of a rule template that is specific to the imaginary
 *  rules created for syntactic predicates.  As they never have return values
 *  nor parameters etc..., just give simplest possible method.  Don't do
 *  any of the normal memoization stuff in here either; it's a waste.
 *  As predicates cannot be inlined into the invoking rule, they need to
 *  be in a rule by themselves.
 */
synpredRule(ruleName, ruleDescriptor, block, description, nakedBlock) ::=
<<
// $ANTLR start <ruleName>
static void <ruleName>_fragment(p<name> ctx <ruleDescriptor.parameterScope:parameterScope()>)
{
	<ruleLabelDefs()>
	<ruleLabelInitializations()>
<if(trace)>
    ANTLR3_PRINTF("enter <ruleName> %d failed = %d, backtracking = %d\\n",LT(1),failed,BACKTRACKING);
    <block>
    ANTLR3_PRINTF("exit <ruleName> %d, failed = %d, backtracking = %d\\n",LT(1),failed,BACKTRACKING);

<else>
    <block>
<endif>
<ruleCleanUp()>
}
// $ANTLR end <ruleName>
>>

synpred(predname) ::= <<
static ANTLR3_BOOLEAN <predname>(p<name> ctx)
{
    ANTLR3_MARKER   start;
    ANTLR3_BOOLEAN  success;

    BACKTRACKING++;
    <@start()>
    start	= MARK();
    <predname>_fragment(ctx);	    // can never throw exception
    success	= !(FAILEDFLAG);
    REWIND(start);
    <@stop()>
    BACKTRACKING--;
    FAILEDFLAG	= ANTLR3_FALSE;
    return success;
}<\n>
>>

lexerSynpred(predname) ::= <<
<synpred(predname)>
>>

ruleMemoization(rname) ::= <<
<if(memoize)>
if ( (BACKTRACKING>0) && (HAVEPARSEDRULE(<ruleDescriptor.index>)) )
{
<if(ruleDescriptor.hasMultipleReturnValues)>
<if(!ruleDescriptor.isSynPred)>
	retval.start = 0;<\n>
<endif>
<endif>
    <(ruleDescriptor.actions.after):execAfter()>
    <finalCode(finalBlock=finally)>
<if(!ruleDescriptor.isSynPred)>
    <scopeClean()><\n>
<endif>
    return <ruleReturnValue()>;
}
<endif>
>>

/** How to test for failure and return from rule */
checkRuleBacktrackFailure() ::= <<
if  (HASEXCEPTION())
{
    goto rule<ruleDescriptor.name>Ex;
}
<if(backtracking)>
if (HASFAILED())
{
    <scopeClean()>
    <@debugClean()>
    return <ruleReturnValue()>;
}
<endif>
>>

/** This rule has failed, exit indicating failure during backtrack */
ruleBacktrackFailure() ::= <<
<if(backtracking)>
if (BACKTRACKING>0)
{
    FAILEDFLAG = <true_value()>;
    <scopeClean()>
    return <ruleReturnValue()>;
}
<endif>
>>

/** How to generate code for a rule.  This includes any return type
 *  data aggregates required for multiple return values.
 */
rule(ruleName,ruleDescriptor,block,emptyRule,description,exceptions,finally,memoize) ::= <<
/**
 * $ANTLR start <ruleName>
 * <fileName>:<description>
 */
static <returnType()>
<ruleName>(p<name> ctx<if(ruleDescriptor.parameterScope)>, <endif><ruleDescriptor.parameterScope:parameterScope()>)
{
    <if(trace)>ANTLR3_PRINTF("enter <ruleName> %s failed=%d, backtracking=%d\n", LT(1), BACKTRACKING);<endif>
    <ruleDeclarations()>
    <ruleDescriptor.actions.declarations>
    <ruleLabelDefs()>
    <ruleInitializations()>
    <ruleDescriptor.actions.init>
    <ruleMemoization(rname=ruleName)>
    <ruleLabelInitializations()>
    <@preamble()>
    {
        <block>
    }

    <ruleCleanUp()>
<if(exceptions)>
    if	(HASEXCEPTION())
    {
	<exceptions:{e|<catch(decl=e.decl,action=e.action)><\n>}>
    }
    else
    {
	<(ruleDescriptor.actions.after):execAfter()>
    }
<else>
    <if(!emptyRule)>
        <if(actions.(actionScope).rulecatch)>
            <actions.(actionScope).rulecatch>
        <else>
            if (HASEXCEPTION())
            {
                PREPORTERROR();
                PRECOVER();
                <@setErrorReturnValue()>
            }
            <if(ruleDescriptor.actions.after)>
            else
            {
                <(ruleDescriptor.actions.after):execAfter()>
            }<\n>
            <endif>
        <endif>
    <endif>
<endif>

    <if(trace)>ANTLR3_PRINTF("exit <ruleName> %d failed=%s backtracking=%s\n", LT(1), failed, BACKTRACKING);<endif>
    <memoize()>
<if(finally)>
    <finalCode(finalBlock=finally)>
<endif>
    <scopeClean()>
    <@postamble()>
    return <ruleReturnValue()>;
}
/* $ANTLR end <ruleName> */
>>

finalCode(finalBlock) ::= <<
{
    <finalBlock>
}

>>

catch(decl,action) ::= <<
/* catch(decl,action)
 */
{
    <e.action>
}

>>

ruleDeclarations() ::= <<
<if(ruleDescriptor.hasMultipleReturnValues)>
<returnType()> retval;<\n>
<else>
<ruleDescriptor.returnScope.attributes:{ a |
<a.type> <a.name>;
}>
<endif>
<if(memoize)>
ANTLR3_MARKER <ruleDescriptor.name>_StartIndex;
<endif>
>>

ruleInitializations() ::= <<
/* Initialize rule variables
 */
<if(ruleDescriptor.hasMultipleReturnValues)>
<ruleDescriptor.returnScope.attributes:{ a |
<if(a.initValue)>retval.<a.name> = <a.initValue>;<endif>
}>
<else>
<ruleDescriptor.returnScope.attributes:{ a |
<if(a.initValue)><a.name> = <a.initValue>;<endif>
}>
<endif>
<if(memoize)>
<ruleDescriptor.name>_StartIndex = INDEX();<\n>
<endif>
<ruleDescriptor.useScopes:{it |<scopeTop(it)> = <scopePush(it)>;}; separator="\n">
<ruleDescriptor.ruleScope:{it |<scopeTop(it.name)> = <scopePush(it.name)>;}; separator="\n">
>>

ruleLabelDefs() ::= <<
<[ruleDescriptor.tokenLabels,ruleDescriptor.tokenListLabels]
    :{it |<labelType>    <it.label.text>;}; separator="\n"
>
<[ruleDescriptor.tokenListLabels,ruleDescriptor.ruleListLabels]
    :{it |pANTLR3_VECTOR    list_<it.label.text>;}; separator="\n"
>
<[ruleDescriptor.ruleLabels,ruleDescriptor.ruleListLabels]
    :ruleLabelDef(); separator="\n"
>
>>

ruleLabelInitializations() ::= <<
<[ruleDescriptor.tokenLabels,ruleDescriptor.tokenListLabels]
    :{it |<it.label.text>       = NULL;}; separator="\n"
>
<[ruleDescriptor.tokenListLabels,ruleDescriptor.ruleListLabels]
    :{it |list_<it.label.text>     = NULL;}; separator="\n"
>
<[ruleDescriptor.ruleLabels,ruleDescriptor.ruleListLabels]
    :ruleLabelInitVal(); separator="\n"
>
<if(ruleDescriptor.hasMultipleReturnValues)>
<if(!ruleDescriptor.isSynPred)>
retval.start = LT(1); retval.stop = retval.start;<\n>
<endif>
<endif>
>>

lexerRuleLabelDefs() ::= <<
<[ruleDescriptor.tokenLabels,
  ruleDescriptor.tokenListLabels,
  ruleDescriptor.ruleLabels]
    :{it |<labelType> <it.label.text>;}; separator="\n"
>
<ruleDescriptor.charLabels:{it |ANTLR3_UINT32 <it.label.text>;}; separator="\n">
<[ruleDescriptor.tokenListLabels,
  ruleDescriptor.ruleListLabels,
  ruleDescriptor.ruleListLabels]
    :{it |pANTLR3_INT_TRIE list_<it.label.text>;}; separator="\n"
>
>>

lexerRuleLabelInit() ::= <<
<[ruleDescriptor.tokenLabels,
  ruleDescriptor.tokenListLabels,
  ruleDescriptor.ruleLabels]
    :{it |<it.label.text> = NULL;}; separator="\n"
>
<[ruleDescriptor.tokenListLabels,
  ruleDescriptor.ruleListLabels,
  ruleDescriptor.ruleListLabels]
    :{it |list_<it.label.text> = antlr3IntTrieNew(31);}; separator="\n"
>
>>

lexerRuleLabelFree() ::= <<
<[ruleDescriptor.tokenLabels,
  ruleDescriptor.tokenListLabels,
  ruleDescriptor.ruleLabels]
    :{it |<it.label.text> = NULL;}; separator="\n"
>
<[ruleDescriptor.tokenListLabels,
  ruleDescriptor.ruleListLabels,
  ruleDescriptor.ruleListLabels]
    :{it |list_<it.label.text>->free(list_<it.label.text>);}; separator="\n"
>
>>

ruleReturnValue() ::= <%
<if(!ruleDescriptor.isSynPred)>
<if(ruleDescriptor.hasReturnValue)>
<if(ruleDescriptor.hasSingleReturnValue)>
<ruleDescriptor.singleValueReturnName>
<else>
retval
<endif>
<endif>
<endif>
%>

memoize() ::= <<
<if(memoize)>
<if(backtracking)>
if ( BACKTRACKING>0 ) { MEMOIZE(<ruleDescriptor.index>, <ruleDescriptor.name>_StartIndex); }
<endif>
<endif>
>>

ruleCleanUp() ::= <<

// This is where rules clean up and exit
//
goto rule<ruleDescriptor.name>Ex; /* Prevent compiler warnings */
rule<ruleDescriptor.name>Ex: ;
<if(ruleDescriptor.hasMultipleReturnValues)>
<if(!TREE_PARSER)>
<if(!ruleDescriptor.isSynPred)>
retval.stop = LT(-1);<\n>
<endif>
<endif>
<endif>
>>

scopeClean() ::= <<
<ruleDescriptor.useScopes:{it |<scopePop(it)>}; separator="\n">
<ruleDescriptor.ruleScope:{it |<scopePop(it.name)>}; separator="\n">

>>
/** How to generate a rule in the lexer; naked blocks are used for
 *  fragment rules, which do not produce tokens.
 */
lexerRule(ruleName,nakedBlock,ruleDescriptor,block,memoize) ::= <<
//   Comes from: <block.description>
/** \brief Lexer rule generated by ANTLR3
 *
 * $ANTLR start <ruleName>
 *
 * Looks to match the characters the constitute the token <ruleName>
 * from the attached input stream.
 *
 *
 * \remark
 *  - lexer->error == ANTLR3_TRUE if an exception was thrown.
 */
static ANTLR3_INLINE
void m<ruleName>(p<name> ctx<if(ruleDescriptor.parameterScope)>, <endif><ruleDescriptor.parameterScope:parameterScope()>)
{
	ANTLR3_UINT32	_type;
    <ruleDeclarations()>
    <ruleDescriptor.actions.declarations>
    <lexerRuleLabelDefs()>
    <if(trace)>System.out.println("enter <ruleName> '"+(char)LA(1)+"' line="+GETLINE()+":"+GETCHARPOSITIONINLINE()+" failed="+failed+" backtracking="+BACKTRACKING);<endif>

<if(nakedBlock)>
    <ruleMemoization(rname=ruleName)>
    <lexerRuleLabelInit()>
    <ruleDescriptor.actions.init>

    <block><\n>
<else>
    <ruleMemoization(rname=ruleName)>
    <lexerRuleLabelInit()>
    _type	    = <ruleName>;

    <ruleDescriptor.actions.init>

    <block>
	LEXSTATE->type = _type;
<endif>
    <if(trace)> ANTLR3_FPRINTF(stderr, "exit <ruleName> '%c' line=%d:%d failed = %d, backtracking =%d\n",LA(1),GETLINE(),GETCHARPOSITIONINLINE(),failed,BACKTRACKING);<endif>
    <ruleCleanUp()>
    <lexerRuleLabelFree()>
    <(ruleDescriptor.actions.after):execAfter()>
    <memoize>
}
// $ANTLR end <ruleName>
>>

/** How to generate code for the implicitly-defined lexer grammar rule
 *  that chooses between lexer rules.
 */
tokensRule(ruleName,nakedBlock,args,block,ruleDescriptor) ::= <<
/** This is the entry point in to the lexer from an object that
 *  wants to generate the next token, such as a pCOMMON_TOKEN_STREAM
 */
static void
mTokens(p<name> ctx)
{
    <block><\n>

    goto ruleTokensEx; /* Prevent compiler warnings */
ruleTokensEx: ;
}
>>

// S U B R U L E S

/** A (...) subrule with multiple alternatives */
block(alts,decls,decision,enclosingBlockLevel,blockLevel,decisionNumber,maxK,maxAlt,description) ::= <<

// <fileName>:<description>
{
    int alt<decisionNumber>=<maxAlt>;
    <decls>
    <@predecision()>
    <decision>
    <@postdecision()>
    <@prebranch()>
    switch (alt<decisionNumber>)
    {
	<alts:{a | <altSwitchCase(i,a)>}>
    }
    <@postbranch()>
}
>>

/** A rule block with multiple alternatives */
ruleBlock(alts,decls,decision,enclosingBlockLevel,blockLevel,decisionNumber,maxK,maxAlt,description) ::= <<
{
    //  <fileName>:<description>

    ANTLR3_UINT32 alt<decisionNumber>;

    alt<decisionNumber>=<maxAlt>;

    <decls>
    <@predecision()>
    <decision>
    <@postdecision()>
    switch (alt<decisionNumber>)
    {
	<alts:{a | <altSwitchCase(i,a)>}>
    }
}
>>

ruleBlockSingleAlt(alts,decls,decision,enclosingBlockLevel,blockLevel,decisionNumber,description) ::= <<
// <fileName>:<description>
<decls>
<@prealt()>
<alts>
<@postalt()>
>>

/** A special case of a (...) subrule with a single alternative */
blockSingleAlt(alts,decls,decision,enclosingBlockLevel,blockLevel,decisionNumber,description) ::= <<
// <fileName>:<description>
<decls>
<@prealt()>
<alts>
<@postalt()>
>>

/** A (..)+ block with 1 or more alternatives */
positiveClosureBlock(alts,decls,decision,enclosingBlockLevel,blockLevel,decisionNumber,maxK,maxAlt,description) ::= <<
// <fileName>:<description>
{
    int cnt<decisionNumber>=0;
    <decls>
    <@preloop()>

    for (;;)
    {
        int alt<decisionNumber>=<maxAlt>;
	<@predecision()>
	<decision>
	<@postdecision()>
	switch (alt<decisionNumber>)
	{
	    <alts:{a | <altSwitchCase(i,a)>}>
	    default:

		if ( cnt<decisionNumber> >= 1 )
		{
		    goto loop<decisionNumber>;
		}
		<ruleBacktrackFailure()>
		<earlyExitEx()>
		<@earlyExitException()>
		goto rule<ruleDescriptor.name>Ex;
	}
	cnt<decisionNumber>++;
    }
    loop<decisionNumber>: ;	/* Jump to here if this rule does not match */
    <@postloop()>
}
>>

earlyExitEx() ::= <<
/* mismatchedSetEx()
 */
CONSTRUCTEX();
EXCEPTION->type = ANTLR3_EARLY_EXIT_EXCEPTION;
EXCEPTION->name = (void *)ANTLR3_EARLY_EXIT_NAME;
<\n>
>>
positiveClosureBlockSingleAlt ::= positiveClosureBlock

/** A (..)* block with 1 or more alternatives */
closureBlock(alts,decls,decision,enclosingBlockLevel,blockLevel,decisionNumber,maxK,maxAlt,description) ::= <<

// <fileName>:<description>
<decls>

<@preloop()>
for (;;)
{
    int alt<decisionNumber>=<maxAlt>;
    <@predecision()>
    <decision>
    <@postdecision()>
    switch (alt<decisionNumber>)
    {
	<alts:{a | <altSwitchCase(i,a)>}>
	default:
	    goto loop<decisionNumber>;	/* break out of the loop */
	    break;
    }
}
loop<decisionNumber>: ; /* Jump out to here if this rule does not match */
<@postloop()>
>>

closureBlockSingleAlt ::= closureBlock

/** Optional blocks (x)? are translated to (x|) by antlr before code generation
 *  so we can just use the normal block template
 */
optionalBlock ::= block

optionalBlockSingleAlt ::= block

/** A case in a switch that jumps to an alternative given the alternative
 *  number.  A DFA predicts the alternative and then a simple switch
 *  does the jump to the code that actually matches that alternative.
 */
altSwitchCase(altNum,alt) ::= <<
case <altNum>:
    <@prealt()>
    <alt>
    break;<\n>
>>

/** An alternative is just a list of elements; at outermost level */
alt(elements,altNum,description,autoAST,outerAlt,treeLevel,rew) ::= <<
// <fileName>:<description>
{
    <@declarations()>
    <@initializations()>
    <elements:element()>
    <rew>
    <@cleanup()>
}
>>

// E L E M E N T S
/** What to emit when there is no rewrite.  For auto build
 *  mode, does nothing.
 */
noRewrite(rewriteBlockLevel, treeLevel) ::= ""

/** Dump the elements one per line */
element(e) ::= <<
<@prematch()>
<e.el><\n>
>>

/** match a token optionally with a label in front */
tokenRef(token,label,elementIndex,terminalOptions) ::= <<
<if(label)><label> = (<labelType>)<endif> MATCHT(<token>, &FOLLOW_<token>_in_<ruleName><elementIndex>);
<checkRuleBacktrackFailure()>
>>

/** ids+=ID */
tokenRefAndListLabel(token,label,elementIndex,terminalOptions) ::= <<
<tokenRef(...)>
<listLabel(elem=label,...)>
>>

listLabel(label,elem) ::= <<
if (list_<label> == NULL)
{
    list_<label>=ctx->vectors->newVector(ctx->vectors);
}
list_<label>->add(list_<label>, <elem>, NULL);
>>


/** match a character */
charRef(char,label) ::= <<
<if(label)>
<label> = LA(1);<\n>
<endif>
MATCHC(<char>);
<checkRuleBacktrackFailure()>
>>

/** match a character range */
charRangeRef(a,b,label) ::= <<
<if(label)>
<label> = LA(1);<\n>
<endif>
MATCHRANGE(<a>, <b>);
<checkRuleBacktrackFailure()>
>>

/** For now, sets are interval tests and must be tested inline */
matchSet(s,label,elementIndex,terminalOptions,postmatchCode="") ::= <<
<if(label)>
<if(LEXER)>
<label>= LA(1);<\n>
<else>
<label>=(<labelType>)LT(1);<\n>
<endif>
<endif>
if ( <s> )
{
    CONSUME();
    <postmatchCode>
<if(!LEXER)>
    PERRORRECOVERY=ANTLR3_FALSE;
<endif>
    <if(backtracking)>FAILEDFLAG=ANTLR3_FALSE;<\n><endif>
}
else
{
    <ruleBacktrackFailure()>
    <mismatchedSetEx()>
    <@mismatchedSetException()>
<if(LEXER)>
    LRECOVER();
<else>
<! use following code to make it recover inline;
    RECOVERFROMMISMATCHEDSET(&FOLLOW_set_in_<ruleName><elementIndex>);
!>
<endif>
    goto rule<ruleDescriptor.name>Ex;
}<\n>
>>

mismatchedSetEx() ::= <<
CONSTRUCTEX();
EXCEPTION->type         = ANTLR3_MISMATCHED_SET_EXCEPTION;
EXCEPTION->name         = (void *)ANTLR3_MISMATCHED_SET_NAME;
<if(PARSER)>
EXCEPTION->expectingSet = NULL;
<! use following code to make it recover inline;
EXCEPTION->expectingSet = &FOLLOW_set_in_<ruleName><elementIndex>;
!>
<endif>
>>

matchRuleBlockSet ::= matchSet

matchSetAndListLabel(s,label,elementIndex,postmatchCode) ::= <<
<matchSet(...)>
<listLabel(elem=label,...)>
>>

/** Match a string literal */
lexerStringRef(string,label,elementIndex) ::= <<
<if(label)>
<label>Start = GETCHARINDEX();
MATCHS(<string>);
<checkRuleBacktrackFailure()>
<label> = LEXSTATE->tokFactory->newToken(LEXSTATE->tokFactory);
<label>->setType(<label>, ANTLR3_TOKEN_INVALID);
<label>->setStartIndex(<label>, <label>Start);
<label>->setStopIndex(<label>, GETCHARINDEX()-1);
<label>->input = INPUT->tnstream->istream;
<else>
MATCHS(<string>);
<checkRuleBacktrackFailure()><\n>
<endif>
>>

wildcard(token,label,elementIndex,terminalOptions) ::= <<
<if(label)>
<label>=(<labelType>)LT(1);<\n>
<endif>
MATCHANYT();
<checkRuleBacktrackFailure()>
>>

wildcardAndListLabel(token,label,elementIndex,terminalOptions) ::= <<
<wildcard(...)>
<listLabel(elem=label,...)>
>>

/** Match . wildcard in lexer */
wildcardChar(label, elementIndex) ::= <<
<if(label)>
<label> = LA(1);<\n>
<endif>
MATCHANY();
<checkRuleBacktrackFailure()>
>>

wildcardCharListLabel(label, elementIndex) ::= <<
<wildcardChar(...)>
<listLabel(elem=label,...)>
>>

/** Match a rule reference by invoking it possibly with arguments
 *  and a return value or values. The 'rule' argument was the
 *  target rule name, but now is type Rule, whose toString is
 *  same: the rule name.  Now though you can access full rule
 *  descriptor stuff.
 */
ruleRef(rule,label,elementIndex,args,scope) ::= <<
FOLLOWPUSH(FOLLOW_<rule.name>_in_<ruleName><elementIndex>);
<if(label)><label>=<endif><if(scope)>ctx-><scope:delegateName()>-><endif><rule.name>(ctx<if(scope)>-><scope:delegateName()><endif><if(args)>, <args; separator=", "><endif>);<\n>
FOLLOWPOP();
<checkRuleBacktrackFailure()>
>>

/** ids+=r */
ruleRefAndListLabel(rule,label,elementIndex,args,scope) ::= <<
<ruleRef(...)>
<listLabel(elem=label,...)>
>>

/** A lexer rule reference
 *  The 'rule' argument was the target rule name, but now
 *  is type Rule, whose toString is same: the rule name.
 *  Now though you can access full rule descriptor stuff.
 */
lexerRuleRef(rule,label,args,elementIndex,scope) ::= <<
/* <description> */
<if(label)>
{
    ANTLR3_MARKER <label>Start<elementIndex> = GETCHARINDEX();
    <if(scope)>ctx-><scope:delegateName()>-><endif>m<rule.name>(ctx<if(scope)>-><scope:delegateName()><endif> <if(args)>, <endif><args; separator=", ">);
    <checkRuleBacktrackFailure()>
    <label> = LEXSTATE->tokFactory->newToken(LEXSTATE->tokFactory);
    <label>->setType(<label>, ANTLR3_TOKEN_INVALID);
    <label>->setStartIndex(<label>, <label>Start<elementIndex>);
    <label>->setStopIndex(<label>, GETCHARINDEX()-1);
    <label>->input = INPUT;
}
<else>
<if(scope)>ctx-><scope:delegateName()>-><endif>m<rule.name>(ctx<if(scope)>-><scope:delegateName()><endif> <if(args)>, <endif><args; separator=", ">);
<checkRuleBacktrackFailure()>
<endif>
>>

/** i+=INT in lexer */
lexerRuleRefAndListLabel(rule,label,args,elementIndex,scope) ::= <<
<lexerRuleRef(...)>
<listLabel(elem=label,...)>
>>

/** EOF in the lexer */
lexerMatchEOF(label,elementIndex) ::= <<
<if(label)>
{
    ANTLR3_UINT32 <label>Start<elementIndex>;
    <labelType> <label>;
    <label>Start<elementIndex> = GETCHARINDEX();
    MATCHC(ANTLR3_CHARSTREAM_EOF);
    <checkRuleBacktrackFailure()>
    <label> = LEXSTATE->tokFactory->newToken(LEXSTATE->tokFactory);
    <label>->setType(<label>, ANTLR3_TOKEN_EOF);
    <label>->setStartIndex(<label>, <label>Start<elementIndex>);
    <label>->setStopIndex(<label>, GETCHARINDEX()-1);
    <label>->input = INPUT->tnstream->istream;
}
<else>
    MATCHC(ANTLR3_CHARSTREAM_EOF);
    <checkRuleBacktrackFailure()>
    <endif>
>>

// used for left-recursive rules
recRuleDefArg()                       ::= "int <recRuleArg()>"
recRuleArg()                          ::= "_p"
recRuleAltPredicate(ruleName,opPrec)  ::= "<recRuleArg()> \<= <opPrec>"
recRuleSetResultAction()              ::= "root_0=$<ruleName>_primary.tree;"
recRuleSetReturnAction(src,name)      ::= "$<name>=$<src>.<name>;"

/** match ^(root children) in tree parser */
tree(root, actionsAfterRoot, children, nullableChildList, enclosingTreeLevel, treeLevel) ::= <<
<root:element()>
<actionsAfterRoot:element()>
<if(nullableChildList)>
if ( LA(1)==ANTLR3_TOKEN_DOWN ) {
    MATCHT(ANTLR3_TOKEN_DOWN, NULL);
    <checkRuleBacktrackFailure()>
    <children:element()>
    MATCHT(ANTLR3_TOKEN_UP, NULL);
    <checkRuleBacktrackFailure()>
}
<else>
MATCHT(ANTLR3_TOKEN_DOWN, NULL);
<checkRuleBacktrackFailure()>
<children:element()>
MATCHT(ANTLR3_TOKEN_UP, NULL);
<checkRuleBacktrackFailure()>
<endif>
>>

/** Every predicate is used as a validating predicate (even when it is
 *  also hoisted into a prediction expression).
 */
validateSemanticPredicate(pred,description) ::= <<
if ( !(<evalPredicate(...)>) )
{
    <ruleBacktrackFailure()>
    <newFPE(...)>
}
>>

newFPE() ::= <<
    CONSTRUCTEX();
    EXCEPTION->type         = ANTLR3_FAILED_PREDICATE_EXCEPTION;
    EXCEPTION->message      = (void *)"<description>";
    EXCEPTION->ruleName	 = (void *)"<ruleName>";
    <\n>
>>

// F i x e d  D F A  (if-then-else)

dfaState(k,edges,eotPredictsAlt,description,stateNumber,semPredState) ::= <<

{
    int LA<decisionNumber>_<stateNumber> = LA(<k>);
    <edges; separator="\nelse ">
    else
    {
<if(eotPredictsAlt)>
        alt<decisionNumber>=<eotPredictsAlt>;
<else>
        <ruleBacktrackFailure()>

        <newNVException()>
        goto rule<ruleDescriptor.name>Ex;

<endif>
    }
}
>>

newNVException() ::= <<
CONSTRUCTEX();
EXCEPTION->type         = ANTLR3_NO_VIABLE_ALT_EXCEPTION;
EXCEPTION->message      = (void *)"<description>";
EXCEPTION->decisionNum  = <decisionNumber>;
EXCEPTION->state        = <stateNumber>;
<@noViableAltException()>
<\n>
>>

/** Same as a normal DFA state except that we don't examine lookahead
 *  for the bypass alternative.  It delays error detection but this
 *  is faster, smaller, and more what people expect.  For (X)? people
 *  expect "if ( LA(1)==X ) match(X);" and that's it.
 */
dfaOptionalBlockState(k,edges,eotPredictsAlt,description,stateNumber,semPredState) ::= <<
{
    int LA<decisionNumber>_<stateNumber> = LA(<k>);
    <edges; separator="\nelse ">
}
>>

/** A DFA state that is actually the loopback decision of a closure
 *  loop.  If end-of-token (EOT) predicts any of the targets then it
 *  should act like a default clause (i.e., no error can be generated).
 *  This is used only in the lexer so that for ('a')* on the end of a rule
 *  anything other than 'a' predicts exiting.
 */

dfaLoopbackStateDecls()::= <<
ANTLR3_UINT32   LA<decisionNumber>_<stateNumber>;
>>
dfaLoopbackState(k,edges,eotPredictsAlt,description,stateNumber,semPredState) ::= <<
{
   /* dfaLoopbackState(k,edges,eotPredictsAlt,description,stateNumber,semPredState)
    */
    int LA<decisionNumber>_<stateNumber> = LA(<k>);
    <edges; separator="\nelse "><\n>
    <if(eotPredictsAlt)>
    <if(!edges)>
	alt<decisionNumber>=<eotPredictsAlt>; <! if no edges, don't gen ELSE !>
	<else>
    else
    {
	alt<decisionNumber>=<eotPredictsAlt>;
    }<\n>
    <endif>
    <endif>
}
>>

/** An accept state indicates a unique alternative has been predicted */
dfaAcceptState(alt) ::= "alt<decisionNumber>=<alt>;"

/** A simple edge with an expression.  If the expression is satisfied,
 *  enter to the target state.  To handle gated productions, we may
 *  have to evaluate some predicates for this edge.
 */
dfaEdge(labelExpr, targetState, predicates) ::= <<
if ( <if(predicates)>(<predicates>) && <endif>(<labelExpr>))
{
    <targetState>
}
>>

// F i x e d  D F A  (switch case)

/** A DFA state where a SWITCH may be generated.  The code generator
 *  decides if this is possible: CodeGenerator.canGenerateSwitch().
 */
dfaStateSwitch(k,edges,eotPredictsAlt,description,stateNumber,semPredState) ::= <<
switch ( LA(<k>) )
{
<edges; separator="\n">

default:
<if(eotPredictsAlt)>
    alt<decisionNumber>=<eotPredictsAlt>;
<else>
    <ruleBacktrackFailure()>
    <newNVException()>
    goto rule<ruleDescriptor.name>Ex;<\n>
<endif>
}<\n>
>>

dfaOptionalBlockStateSwitch(k,edges,eotPredictsAlt,description,stateNumber,semPredState) ::= <<
switch ( LA(<k>) )
{
    <edges; separator="\n">
}<\n>
>>

dfaLoopbackStateSwitch(k, edges,eotPredictsAlt,description,stateNumber,semPredState) ::= <<
switch ( LA(<k>) )
{
<edges; separator="\n"><\n>
<if(eotPredictsAlt)>
default:
    alt<decisionNumber>=<eotPredictsAlt>;
    break;<\n>
<endif>
}<\n>
>>

dfaEdgeSwitch(labels, targetState) ::= <<
<labels:{it |case <it>:}; separator="\n">
	{
		<targetState>
	}
    break;
>>

// C y c l i c  D F A

/** The code to initiate execution of a cyclic DFA; this is used
 *  in the rule to predict an alt just like the fixed DFA case.
 *  The <name> attribute is inherited via the parser, lexer, ...
 */
dfaDecision(decisionNumber,description) ::= <<
alt<decisionNumber> = cdfa<decisionNumber>.predict(ctx, RECOGNIZER, ISTREAM, &cdfa<decisionNumber>);
<checkRuleBacktrackFailure()>
>>

/* Dump DFA tables as static initialized arrays of shorts(16 bits)/characters(8 bits)
 * which are then used to statically initialize the dfa structure, which means that there
 * is no runtime initialization whatsoever, other than anything the C compiler might
 * need to generate. In general the C compiler will lay out memory such that there is no
 * runtime code required.
 */
cyclicDFA(dfa) ::= <<
/** Static dfa state tables for Cyclic dfa:
 *    <dfa.description>
 */
static const ANTLR3_INT32 dfa<dfa.decisionNumber>_eot[<dfa.numberOfStates>] =
    {
	<dfa.eot; wrap="\n", separator=", ", null="-1">
    };
static const ANTLR3_INT32 dfa<dfa.decisionNumber>_eof[<dfa.numberOfStates>] =
    {
	<dfa.eof; wrap="\n", separator=", ", null="-1">
    };
static const ANTLR3_INT32 dfa<dfa.decisionNumber>_min[<dfa.numberOfStates>] =
    {
	<dfa.min; wrap="\n", separator=", ", null="-1">
    };
static const ANTLR3_INT32 dfa<dfa.decisionNumber>_max[<dfa.numberOfStates>] =
    {
	<dfa.max; wrap="\n", separator=", ", null="-1">
    };
static const ANTLR3_INT32 dfa<dfa.decisionNumber>_accept[<dfa.numberOfStates>] =
    {
	<dfa.accept; wrap="\n", separator=", ", null="-1">
    };
static const ANTLR3_INT32 dfa<dfa.decisionNumber>_special[<dfa.numberOfStates>] =
    {
	<dfa.special; wrap="\n", separator=", ", null="-1">
    };

/** Used when there is no transition table entry for a particular state */
#define dfa<dfa.decisionNumber>_T_empty	    NULL

<dfa.edgeTransitionClassMap.keys:{ table |
static const ANTLR3_INT32 dfa<dfa.decisionNumber>_T<i0>[] =
    {
	<table; separator=", ", wrap="\n", null="-1">
    \};}; null = "">

/* Transition tables are a table of sub tables, with some tables
 * reused for efficiency.
 */
static const ANTLR3_INT32 * const dfa<dfa.decisionNumber>_transitions[] =
{
    <dfa.transitionEdgeTables:{xref|dfa<dfa.decisionNumber>_T<xref>}; separator=", ", wrap="\n", null="NULL">
};

<if(dfa.specialStateSTs)>
static ANTLR3_INT32 dfa<dfa.decisionNumber>_sst(p<name> ctx, pANTLR3_BASE_RECOGNIZER recognizer, pANTLR3_INT_STREAM is, pANTLR3_CYCLIC_DFA dfa, ANTLR3_INT32 s)
{
    ANTLR3_INT32    _s;

    _s	    = s;
    switch  (s)
    {
    <dfa.specialStateSTs:{state |
    case <i0>:

	<state>}; separator="\n">
    }
<if(backtracking)>
    if (BACKTRACKING > 0)
    {
	FAILEDFLAG = ANTLR3_TRUE;
	return	-1;
    }
<endif>

    CONSTRUCTEX();
    EXCEPTION->type         = ANTLR3_NO_VIABLE_ALT_EXCEPTION;
    EXCEPTION->message      = (void *)"<dfa.description>";
    EXCEPTION->decisionNum  = <dfa.decisionNumber>;
    EXCEPTION->state        = _s;
    <@noViableAltException()>
    return -1;
}
<endif>

<@errorMethod()>

/* Declare tracking structure for Cyclic DFA <dfa.decisionNumber>
 */
static
ANTLR3_CYCLIC_DFA cdfa<dfa.decisionNumber>
    =	{
	    <dfa.decisionNumber>,		    /* Decision number of this dfa	    */
	    /* Which decision this represents:   */
	    (const pANTLR3_UCHAR)"<dfa.description>",
<if(dfa.specialStateSTs)>
	    (CDFA_SPECIAL_FUNC) dfa<dfa.decisionNumber>_sst,
<else>
	    (CDFA_SPECIAL_FUNC) antlr3dfaspecialStateTransition,	/* Default special state transition function	*/
<endif>

	    antlr3dfaspecialTransition,		/* DFA specialTransition is currently just a default function in the runtime */
	    antlr3dfapredict,			/* DFA simulator function is in the runtime */
	    dfa<dfa.decisionNumber>_eot,	    /* EOT table			    */
	    dfa<dfa.decisionNumber>_eof,	    /* EOF table			    */
	    dfa<dfa.decisionNumber>_min,	    /* Minimum tokens for each state    */
	    dfa<dfa.decisionNumber>_max,	    /* Maximum tokens for each state    */
	    dfa<dfa.decisionNumber>_accept,	/* Accept table			    */
	    dfa<dfa.decisionNumber>_special,	/* Special transition states	    */
	    dfa<dfa.decisionNumber>_transitions	/* Table of transition tables	    */

	};
/* End of Cyclic DFA <dfa.decisionNumber>
 * ---------------------
 */
>>

/** A state in a cyclic DFA; it's a special state and part of a big switch on
 *  state.
 */
cyclicDFAState(decisionNumber,stateNumber,edges,needErrorClause,semPredState) ::= <<
{
    ANTLR3_UINT32 LA<decisionNumber>_<stateNumber>;<\n>
    ANTLR3_MARKER index<decisionNumber>_<stateNumber>;<\n>

	LA<decisionNumber>_<stateNumber> = LA(1);<\n>
    <if(semPredState)> <! get next lookahead symbol to test edges, then rewind !>
    index<decisionNumber>_<stateNumber> = INDEX();<\n>
    REWINDLAST();<\n>
    <endif>
    s = -1;
    <edges; separator="\nelse ">
	<if(semPredState)> <! return input cursor to state before we rewound !>
	SEEK(index<decisionNumber>_<stateNumber>);<\n>
	<endif>
    if ( s>=0 )
    {
	return s;
    }
}
break;
>>

/** Just like a fixed DFA edge, test the lookahead and indicate what
 *  state to jump to next if successful.
 */
cyclicDFAEdge(labelExpr, targetStateNumber, edgeNumber, predicates) ::= <<
if ( <if(predicates)>(<predicates>) && <endif>(<labelExpr>) )
{
    s = <targetStateNumber>;
}<\n>
>>

/** An edge pointing at end-of-token; essentially matches any char;
 *  always jump to the target.
 */
eotDFAEdge(targetStateNumber,edgeNumber, predicates) ::= <<
 s = <targetStateNumber>;<\n>
>>


// D F A  E X P R E S S I O N S

andPredicates(left,right) ::= "( (<left>) && (<right>) )"

orPredicates(operands) ::= "(<operands:{o|(<o>)}; separator=\"||\">)"

notPredicate(pred) ::= "!( <evalPredicate(pred,{})> )"

evalPredicate(pred,description) ::= "(<pred>)"

evalSynPredicate(pred,description) ::= "<pred>(ctx)"

lookaheadTest(atom,k,atomAsInt) ::= "LA<decisionNumber>_<stateNumber> == <atom>"

/** Sometimes a lookahead test cannot assume that LA(k) is in a temp variable
 *  somewhere.  Must ask for the lookahead directly.
 */
isolatedLookaheadTest(atom,k,atomAsInt) ::= "LA(<k>) == <atom>"

lookaheadRangeTest(lower,upper,k,rangeNumber,lowerAsInt,upperAsInt) ::= <%
((LA<decisionNumber>_<stateNumber> >= <lower>) && (LA<decisionNumber>_<stateNumber> \<= <upper>))
%>

isolatedLookaheadRangeTest(lower,upper,k,rangeNumber,lowerAsInt,upperAsInt) ::= "((LA(<k>) >= <lower>) && (LA(<k>) \<= <upper>))"

setTest(ranges) ::= "<ranges; separator=\" || \">"

// A T T R I B U T E S

makeScopeSet() ::= <<
/* makeScopeSet()
 */
 /** Definition of the <scope.name> scope variable tracking
 *  structure. An instance of this structure is created by calling
 *  <name>_<scope.name>Push().
 */
typedef struct  <scopeStruct(sname=scope.name,...)>_struct
{
    /** Function that the user may provide to be called when the
     *  scope is destroyed (so you can free pANTLR3_HASH_TABLES and so on)
     *
     * \param POinter to an instance of this typedef/struct
     */
    void    (ANTLR3_CDECL *free)	(struct <scopeStruct(sname=scope.name,...)>_struct * frame);

    /* =============================================================================
     * Programmer defined variables...
     */
    <scope.attributes:{it |<it.decl>;}; separator="\n">

    /* End of programmer defined variables
     * =============================================================================
     */
}
    <scopeStruct(sname=scope.name,...)>, * <scopeType(sname=scope.name,...)>;

>>

globalAttributeScopeDecl(scope) ::= <<
<if(scope.attributes)>
/* globalAttributeScopeDecl(scope)
 */
<makeScopeSet(...)>
<endif>
>>

ruleAttributeScopeDecl(scope) ::= <<
<if(scope.attributes)>
/* ruleAttributeScopeDecl(scope)
 */
<makeScopeSet(...)>
<endif>
>>

globalAttributeScopeFuncDecl(scope) ::=
<<
/* globalAttributeScopeFuncDecl(scope)
 */
<if(scope.attributes)>
/* -----------------------------------------------------------------------------
 * Function declaration for creating a <name>_<scope.name> scope set
 */
static <scopeType(sname=scope.name,...)>   <scopePushName(sname=scope.name,...)>(p<name> ctx);
static void ANTLR3_CDECL <scope.name>Free(<scopeType(sname=scope.name)> scope);
/* ----------------------------------------------------------------------------- */

<endif>
>>

globalAttributeScopeFuncMacro(scope) ::= <<
<if(scope.attributes)>
/* globalAttributeScopeFuncMacro(scope)
 */
/** Function  for popping the top value from a <scopeStack(sname=scope.name)>
 */
void
<scopePopName(sname=scope.name,...)>(p<name> ctx)
{
    // First see if the user defined a function they want to be called when a
    // scope is popped/freed.
    //
	// If the user supplied the scope entries with a free function,then call it first
	//
    if	(SCOPE_TOP(<scope.name>)->free != NULL)
	{
        SCOPE_TOP(<scope.name>)->free(SCOPE_TOP(<scope.name>));
	}

    // Now we decrement the scope's upper limit bound. We do not actually pop the scope as
    // we want to reuse scope entries if we do continuous push and pops. Most scopes don't
    // next too far so we don't want to keep freeing and allocating them
    //
    ctx-><scopeStack(sname=scope.name,...)>_limit--;
    SCOPE_TOP(<scope.name>) = (<scopeType(sname=scope.name)>)(ctx-><scopeStack(sname=scope.name,...)>->get(ctx-><scopeStack(sname=scope.name,...)>, ctx-><scopeStack(sname=scope.name,...)>_limit - 1));
}
<endif>
>>

ruleAttributeScopeFuncDecl(scope) ::= <<
<if(scope.attributes)>
/* ruleAttributeScopeFuncDecl(scope)
 */
/* -----------------------------------------------------------------------------
 * Function declarations for creating a <name>_<scope.name> scope set
 */
static <scopeType(sname=scope.name,...)>   <scopePushName(sname=scope.name,...)>(p<name> ctx);
static void ANTLR3_CDECL <scope.name>Free(<scopeType(sname=scope.name)> scope);
/* ----------------------------------------------------------------------------- */

<endif>
>>

ruleAttributeScopeFuncMacro(scope) ::= <<
<if(scope.attributes)>
/* ruleAttributeScopeFuncMacro(scope)
 */
/** Function for popping the top value from a <scopeStack(sname=scope.name,...)>
 */
void
<scopePopName(sname=scope.name,...)>(p<name> ctx)
{
    // First see if the user defined a function they want to be called when a
    // scope is popped/freed.
    //
	// If the user supplied the scope entries with a free function,then call it first
	//
    if	(SCOPE_TOP(<scope.name>)->free != NULL)
	{
        SCOPE_TOP(<scope.name>)->free(SCOPE_TOP(<scope.name>));
	}

    // Now we decrement the scope's upper limit bound. We do not actually pop the scope as
    // we want to reuse scope entries if we do continuous push and pops. Most scopes don't
    // next too far so we don't want to keep freeing and allocating them
    //
    ctx-><scopeStack(sname=scope.name,...)>_limit--;
    SCOPE_TOP(<scope.name>) = (<scopeType(sname=scope.name)>)(ctx-><scopeStack(sname=scope.name,...)>->get(ctx-><scopeStack(sname=scope.name,...)>, ctx-><scopeStack(sname=scope.name,...)>_limit - 1));
}

<endif>
>>

globalAttributeScopeDef(scope) ::=
<<
/* globalAttributeScopeDef(scope)
 */
<if(scope.attributes)>
/** Pointer to the  <scope.name> stack for use by <scopePushName(sname=scope.name)>()
 *  and <scopePopName(sname=scope.name,...)>()
 */
pANTLR3_STACK <scopeStack(sname=scope.name)>;
ANTLR3_UINT32 <scopeStack(sname=scope.name)>_limit;
/** Pointer to the top of the stack for the global scope <scopeStack(sname=scope.name)>
 */
<scopeType(sname=scope.name,...)>    (*<scopePushName(sname=scope.name,...)>)(struct <name>_Ctx_struct * ctx);
<scopeType(sname=scope.name,...)>    <scopeTopDecl(sname=scope.name,...)>;

<endif>
>>

ruleAttributeScopeDef(scope) ::= <<
<if(scope.attributes)>
/* ruleAttributeScopeDef(scope)
 */
/** Pointer to the  <scope.name> stack for use by <scopePushName(sname=scope.name)>()
 *  and <scopePopName(sname=scope.name,...)>()
 */
pANTLR3_STACK <scopeStack(sname=scope.name,...)>;
ANTLR3_UINT32 <scopeStack(sname=scope.name,...)>_limit;
<scopeType(sname=scope.name,...)>   (*<scopePushName(sname=scope.name,...)>)(struct <name>_Ctx_struct * ctx);
<scopeType(sname=scope.name,...)>   <scopeTopDecl(sname=scope.name,...)>;

<endif>
>>

globalAttributeScopeFuncs(scope) ::= <<
<if(scope.attributes)>
/* globalAttributeScopeFuncs(scope)
 */
<attributeFuncs(scope)>
<endif>
>>

ruleAttributeScopeFuncs(scope) ::= <<
<if(scope.attributes)>
/* ruleAttributeScopeFuncs(scope)
 */
<attributeFuncs(scope)>
<endif>
>>

globalAttributeScope(scope) ::= <<
<if(scope.attributes)>
/* globalAttributeScope(scope)
 */
ctx-><scopePushName(sname=scope.name,...)>     = <scopePushName(sname=scope.name,...)>;
ctx-><scopeStack(sname=scope.name,...)>    = antlr3StackNew(0);
ctx-><scopeStack(sname=scope.name,...)>_limit    = 0;
<scopeTop(sname=scope.name,...)>      = NULL;
<endif>
>>

ruleAttributeScope(scope) ::=
<<
<if(scope.attributes)>
/* ruleAttributeScope(scope)
 */
ctx-><scopePushName(sname=scope.name,...)>     = <scopePushName(sname=scope.name,...)>;
ctx-><scopeStack(sname=scope.name,...)>    = antlr3StackNew(0);
ctx-><scopeStack(sname=scope.name,...)>_limit    = 0;
<scopeTop(sname=scope.name,...)>      = NULL;
<endif>
>>
globalAttributeScopeFree(scope) ::= <<
<if(scope.attributes)>
/* globalAttributeScope(scope)
 */
ctx-><scopeStack(sname=scope.name,...)>->free(ctx-><scopeStack(sname=scope.name,...)>);
<endif>
>>

ruleAttributeScopeFree(scope) ::=
<<
<if(scope.attributes)>
/* ruleAttributeScope(scope)
 */
ctx-><scopeStack(sname=scope.name,...)>->free(ctx-><scopeStack(sname=scope.name,...)>);
<endif>
>>

scopeTopDecl(sname) ::= <<
p<name>_<sname>Top
>>

scopeTop(sname) ::= <<
ctx-><scopeTopDecl(sname=sname,...)>
>>

scopePop(sname) ::= <<
<scopePopName(sname=sname,...)>(ctx);
>>

scopePush(sname) ::= <<
p<name>_<sname>Push(ctx)
>>

scopePopName(sname) ::= <<
p<name>_<sname>Pop
>>

scopePushName(sname) ::= <<
p<name>_<sname>Push
>>

scopeType(sname) ::= <<
p<name>_<sname>_SCOPE
>>

scopeStruct(sname) ::= <<
<name>_<sname>_SCOPE
>>

scopeStack(sname) ::= <<
p<name>_<sname>Stack
>>

attributeFuncs(scope) ::= <<
<if(scope.attributes)>
/* attributeFuncs(scope)
 */

static void ANTLR3_CDECL <scope.name>Free(<scopeType(sname=scope.name)> scope)
{
    ANTLR3_FREE(scope);
}

/** \brief Allocate initial memory for a <name> <scope.name> scope variable stack entry and
 *         add it to the top of the stack.
 *
 * \remark
 * By default the structure is freed with ANTLR_FREE(), but you can use the
 * the \@init action to install a pointer to a custom free() routine by
 * adding the code:
 * \code
 *   <scopeTop(sname=scope.name)>->free = myroutine;
 * \endcode
 *
 * With lots of comments of course! The routine should be declared in
 * \@members { } as:
 * \code
 *   void ANTLR3_CDECL myfunc( <scopeType(sname=scope.name)> ptr).
 * \endcode
 *
 * It should perform any custom freeing stuff that you need (call ANTLR_FREE3, not free()
 * NB: It should not free the pointer it is given, which is the scope stack entry itself
 * and will be freed by the function that calls your custom free routine.
 *
 */
static <scopeType(sname=scope.name)>
<scopePushName(sname=scope.name)>(p<name> ctx)
{
    /* Pointer used to create a new set of attributes
     */
    <scopeType(sname=scope.name)>      newAttributes;

    /* Allocate the memory for a new structure if we need one.
     */
    if (ctx-><scopeStack(sname=scope.name)>->size(ctx-><scopeStack(sname=scope.name)>) > ctx-><scopeStack(sname=scope.name)>_limit)
    {
        // The current limit value was less than the number of scopes available on the stack so
        // we can just reuse one. Our limit tracks the stack count, so the index of the entry we want
        // is one less than that, or conveniently, the current value of limit.
        //
        newAttributes = (<scopeType(sname=scope.name)>)ctx-><scopeStack(sname=scope.name)>->get(ctx-><scopeStack(sname=scope.name)>, ctx-><scopeStack(sname=scope.name)>_limit);
    }
    else
    {
        // Need a new allocation
        //
        newAttributes = (<scopeType(sname=scope.name)>) ANTLR3_MALLOC(sizeof(<scopeStruct(sname=scope.name)>));
        if  (newAttributes != NULL)
        {
            /* Standard ANTLR3 library implementation
             */
            ctx-><scopeStack(sname=scope.name)>->push(ctx-><scopeStack(sname=scope.name)>, newAttributes, (void (*)(void *))<scope.name>Free);
        }
    }

    // Blank out any previous free pointer, the user might or might install a new one.
    //
    newAttributes->free = NULL;

    // Indicate the position in the available stack that the current level is at
    //
    ctx-><scopeStack(sname=scope.name)>_limit++;

	/* Return value is the pointer to the new entry, which may be used locally
	 * without de-referencing via the context.
     */
    return  newAttributes;
}<\n>

<endif>
>>
returnStructName(r) ::= "<r.name>_return"

returnType() ::= <%
<if(!ruleDescriptor.isSynPred)>
<if(ruleDescriptor.hasMultipleReturnValues)>
<ruleDescriptor.grammar.recognizerName>_<ruleDescriptor:returnStructName()>
<else>
<if(ruleDescriptor.hasSingleReturnValue)>
<ruleDescriptor.singleValueReturnType>
<else>
void
<endif>
<endif>
<else>
ANTLR3_BOOLEAN
<endif>
%>

/** Generate the C type associated with a single or multiple return
 *  value(s).
 */
ruleLabelType(referencedRule) ::= <%
<if(referencedRule.hasMultipleReturnValues)>
<referencedRule.grammar.recognizerName>_<referencedRule.name>_return
<else>
<if(referencedRule.hasSingleReturnValue)>
<referencedRule.singleValueReturnType>
<else>
void
<endif>
<endif>
%>

delegateName(d) ::= <<
<if(d.label)><d.label><else>g<it.name><endif>
>>

/** Using a type to init value map, try to init a type; if not in table
 *  must be an object, default value is "0".
 */
initValue(typeName) ::= <<
 = <cTypeInitMap.(typeName)>
>>

/** Define a rule label  */
ruleLabelDef(label) ::= <<
<ruleLabelType(referencedRule=label.referencedRule)> <label.label.text>;
#undef	RETURN_TYPE_<label.label.text>
#define	RETURN_TYPE_<label.label.text> <ruleLabelType(referencedRule=label.referencedRule)><\n>
>>
/**  Rule label default value */
ruleLabelInitVal(label) ::= <<
>>

ASTLabelType() ::= "<if(recognizer.ASTLabelType)><recognizer.ASTLabelType><else>pANTLR3_BASE_TREE<endif>"

/** Define a return struct for a rule if the code needs to access its
 *  start/stop tokens, tree stuff, attributes, ...  Leave a hole for
 *  subgroups to stick in members.
 */
returnScope(scope) ::= <<
<if(!ruleDescriptor.isSynPred)>
<if(ruleDescriptor.hasMultipleReturnValues)>
typedef struct <ruleDescriptor.grammar.recognizerName>_<ruleDescriptor:returnStructName()>_struct
{
<if(!TREE_PARSER)>
    /** Generic return elements for ANTLR3 rules that are not in tree parsers or returning trees
     */
    pANTLR3_COMMON_TOKEN    start;
    pANTLR3_COMMON_TOKEN    stop;
<else>
    <recognizer.ASTLabelType>       start;
    <recognizer.ASTLabelType>       stop;
<endif>
    <@ruleReturnMembers()>
    <ruleDescriptor.returnScope.attributes:{it |<it.type> <it.name>;}; separator="\n">
}
    <ruleDescriptor.grammar.recognizerName>_<ruleDescriptor:returnStructName()>;<\n><\n>
<endif>
<endif>
>>

parameterScope(scope) ::= <<
<scope.attributes:{it |<it.decl>}; separator=", ">
>>

parameterAttributeRef(attr) ::= "<attr.name>"
parameterSetAttributeRef(attr,expr) ::= "<attr.name>=<expr>;"

/** Note that the scopeAttributeRef does not have access to the
 * grammar name directly
 */
scopeAttributeRef(scope,attr,index,negIndex) ::= <%
<if(negIndex)>
	((SCOPE_TYPE(<scope>))(ctx->SCOPE_STACK(<scope>)->get( ctx->SCOPE_STACK(<scope>), ctx->SCOPE_STACK(<scope>)->size(ctx->SCOPE_STACK(<scope>)) - <negIndex> - 1) ))-><attr.name>
<else>
<if(index)>
	((SCOPE_TYPE(<scope>))(ctx->SCOPE_STACK(<scope>)->get(ctx->SCOPE_STACK(<scope>), (ANTLR3_UINT32)<index> ) ))-><attr.name>
<else>
	(SCOPE_TOP(<scope>))-><attr.name>
<endif>
<endif>
%>

scopeSetAttributeRef(scope,attr,expr,index,negIndex) ::= <%
<if(negIndex)>
	((SCOPE_TYPE(<scope>))(ctx->SCOPE_STACK(<scope>)->get( ctx->SCOPE_STACK(<scope>), ctx->SCOPE_STACK(<scope>)->size(ctx->SCOPE_STACK(<scope>)) - <negIndex> - 1) ))-><attr.name> = <expr>;
<else>
<if(index)>
	((SCOPE_TYPE(<scope>))(ctx->SCOPE_STACK(<scope>)->get(ctx->SCOPE_STACK(<scope>), (ANTLR3_UINT32)<index> ) ))-><attr.name> = <expr>;
<else>
	(SCOPE_TOP(<scope>))-><attr.name>=<expr>;
<endif>
<endif>
%>

/** $x is either global scope or x is rule with dynamic scope; refers
 *  to stack itself not top of stack.  This is useful for predicates
 *  like {$function.size()>0 && $function::name.equals("foo")}?
 */
isolatedDynamicScopeRef(scope) ::= "ctx->SCOPE_STACK(<scope>)"

/** reference an attribute of rule; might only have single return value */
ruleLabelRef(referencedRule,scope,attr) ::= <<
<if(referencedRule.hasMultipleReturnValues)>
<scope>.<attr.name>
<else>
<scope>
<endif>
>>

returnAttributeRef(ruleDescriptor,attr) ::= <<
<if(ruleDescriptor.hasMultipleReturnValues)>
retval.<attr.name>
<else>
<attr.name>
<endif>
>>

returnSetAttributeRef(ruleDescriptor,attr,expr) ::= <<
<if(ruleDescriptor.hasMultipleReturnValues)>
retval.<attr.name>=<expr>;
<else>
<attr.name>=<expr>;
<endif>
>>

/** How to translate $tokenLabel */
tokenLabelRef(label) ::= "<label>"

/** ids+=ID {$ids} or e+=expr {$e} */
listLabelRef(label) ::= "list_<label>"


// not sure the next are the right approach
//
tokenLabelPropertyRef_text(scope,attr) ::= "(<scope>->getText(<scope>))"
tokenLabelPropertyRef_type(scope,attr) ::= "(<scope>->getType(<scope>))"
tokenLabelPropertyRef_line(scope,attr) ::= "(<scope>->getLine(<scope>))"
tokenLabelPropertyRef_pos(scope,attr) ::= "(<scope>->getCharPositionInLine(<scope>))"
tokenLabelPropertyRef_channel(scope,attr) ::= "(<scope>->getChannel(<scope>))"
tokenLabelPropertyRef_index(scope,attr) ::= "(<scope>->getTokenIndex(<scope>))"
tokenLabelPropertyRef_tree(scope,attr) ::= "(<scope>->tree)"
tokenLabelPropertyRef_int(scope,attr) ::= "(<scope>->getText(<scope>)->toInt32(<scope>->getText(<scope>)))"

ruleLabelPropertyRef_start(scope,attr) ::= "(<scope>.start)"
ruleLabelPropertyRef_stop(scope,attr) ::= "(<scope>.stop)"
ruleLabelPropertyRef_tree(scope,attr) ::= "(<scope>.tree)"
ruleLabelPropertyRef_text(scope,attr) ::= <<
<if(TREE_PARSER)>
(STRSTREAM->toStringSS(STRSTREAM, <scope>.start, <scope>.start))
<else>
(STRSTREAM->toStringTT(STRSTREAM, <scope>.start, <scope>.stop))
<endif>
>>

ruleLabelPropertyRef_st(scope,attr) ::= "<scope>.st"

/** Isolated $RULE ref ok in lexer as it's a Token */
lexerRuleLabel(label) ::= "<label>"

lexerRuleLabelPropertyRef_type(scope,attr) ::= "(<scope>->getType(<scope>))"
lexerRuleLabelPropertyRef_line(scope,attr) ::= "(<scope>->getLine(<scope>))"
lexerRuleLabelPropertyRef_pos(scope,attr) ::= "(<scope>->getCharPositionInLine(<scope>))"
lexerRuleLabelPropertyRef_channel(scope,attr) ::= "(<scope>->getChannel(<scope>))"
lexerRuleLabelPropertyRef_index(scope,attr) ::= "(<scope>->getTokenIndex(<scope>))"
lexerRuleLabelPropertyRef_text(scope,attr) ::= "(<scope>->getText(<scope>))"

// Somebody may ref $template or $tree or $stop within a rule:
rulePropertyRef_start(scope,attr) ::= "retval.start"
rulePropertyRef_stop(scope,attr) ::= "retval.stop"
rulePropertyRef_tree(scope,attr) ::= "retval.tree"
rulePropertyRef_text(scope,attr) ::= <<
<if(TREE_PARSER)>
INPUT->toStringSS(INPUT, ADAPTOR->getTokenStartIndex(ADAPTOR, retval.start), ADAPTOR->getTokenStopIndex(ADAPTOR, retval.start))
<else>
STRSTREAM->toStringTT(STRSTREAM, retval.start, LT(-1))
<endif>
>>
rulePropertyRef_st(scope,attr) ::= "retval.st"

lexerRulePropertyRef_text(scope,attr) ::= "LEXER->getText(LEXER)"
lexerRulePropertyRef_type(scope,attr) ::= "_type"
lexerRulePropertyRef_line(scope,attr) ::= "LEXSTATE->tokenStartLine"
lexerRulePropertyRef_pos(scope,attr) ::= "LEXSTATE->tokenStartCharPositionInLine"
lexerRulePropertyRef_channel(scope,attr) ::= "LEXSTATE->channel"
lexerRulePropertyRef_start(scope,attr) ::= "LEXSTATE->tokenStartCharIndex"
lexerRulePropertyRef_stop(scope,attr) ::= "(LEXER->getCharIndex(LEXER)-1)"
lexerRulePropertyRef_index(scope,attr) ::= "-1" // undefined token index in lexer
lexerRulePropertyRef_int(scope,attr) ::= "LEXER->getText(LEXER)->toInt32(LEXER->getText(LEXER))"


// setting $st and $tree is allowed in local rule. everything else is flagged as error
ruleSetPropertyRef_tree(scope,attr,expr) ::= "retval.tree=<expr>;"
ruleSetPropertyRef_st(scope,attr,expr) ::= "retval.st=<expr>;"


/** How to deal with an @after for C targets. Because we cannot rely on
 *  any garbage collection, after code is executed even in backtracking
 *  mode. Must be documented clearly.
 */
execAfter(action) ::= <<
{
    <action>
}
>>

/** How to execute an action (when not backtracking) */
execAction(action) ::= <<
<if(backtracking)>
<if(actions.(actionScope).synpredgate)>
if ( <actions.(actionScope).synpredgate> )
{
    <action>
}
<else>
if ( BACKTRACKING == 0 )
{
    <action>
}
<endif>
<else>
{
    <action>
}
<endif>
>>

// M I S C (properties, etc...)

bitsetDeclare(name, words64) ::= <<

/** Bitset defining follow set for error recovery in rule state: <name>  */
static	ANTLR3_BITWORD <name>_bits[]	= { <words64:{it |ANTLR3_UINT64_LIT(<it>)}; separator=", "> };
static  ANTLR3_BITSET_LIST <name>	= { <name>_bits, <length(words64)>	};
>>

bitset(name, words64) ::= <<
antlr3BitsetSetAPI(&<name>);<\n>
>>

codeFileExtension() ::= ".c"

true_value() ::= "ANTLR3_TRUE"
false_value() ::= "ANTLR3_FALSE"