# Config file for the Apache httpd.

# Configuration.tmpl is the template for Configuration. Configuration should
# be edited to select the modules to be included as well as various flags
# for Makefile.

# The template should only be changed when a new system or module is added,
# or an existing one modified. This will also most likely require some minor
# changes to Configure to recognize those changes.

# There are 5 types of lines here:

# '#' comments, distinguished by having a '#' as the first non-blank character
#
# Makefile options, such as CC=gcc, etc...
#
# Rules, distinguished by having "Rule" at the front. These are used to
# control Configure's behavior as far as how to create Makefile.
#
# Module selection lines, distinguished by having 'AddModule' at the front.
# These list the configured modules, in priority order (highest priority
# last).  They're down at the bottom.
#
# Optional module selection lines, distinguished by having `%Module'
# at the front.  These specify a module that is to be compiled in (but
# not enabled).  The AddModule directive can be used to enable such a
# module.  By default no such modules are defined.


################################################################
# Makefile configuration
#
# These are added to the general flags determined by Configure.
# Edit these to work around Configure if needed. The EXTRA_* family
# will be added to the regular Makefile flags. For example, if you
# want to compile with -Wall, then add that to EXTRA_CFLAGS. These
# will be added to whatever flags Configure determines as appropriate
# and needed for your platform.
#
# You can also set the compiler and Optimization used here as well.
# Settings here have priority; If not set, Configure will attempt to guess
# the C compiler, looking for gcc first, then cc.
#
EXTRA_CFLAGS= `$(SRCDIR)/apaci`
EXTRA_LDFLAGS=
EXTRA_LIBS=
EXTRA_INCLUDES=

#CC=
OPTIM=-O2
#RANLIB=

################################################################
# Dynamic Shared Object (DSO) support
#
# There is experimental support for compiling the Apache core and
# the Apache modules into dynamic shared object (DSO) files for
# maximum runtime flexibility.
#
# The Configure script currently has only limited built-in
# knowledge on how to compile these DSO files because this is
# heavily platform-dependent. The current state of supported and
# explicitly unsupported platforms can be found in the README.DSO
# file under "Supported Platforms".
#
# For other platforms where you want to use the DSO mechanism you
# first have to make sure it supports the pragmatic dlopen()
# system call and then you have to provide the appropriate
# compiler and linker flags below to create the DSO files on your
# particular platform.
#
# The placement of the Apache core into a DSO file is triggered
# by the SHARED_CORE rule below while support for building
# individual Apache Modules as DSO files and loading them under
# runtime without recompilation is triggered by `SharedModule'
# commands. To be able to use the latter one first enable the
# module mod_so (see corresponding `AddModule' command below).
# Then enable the DSO feature for particular modules individually
# by replacing their `AddModule' command with `SharedModule' and
# change the filename extension from `.o' to `.so'. 

#CFLAGS_SHLIB=
#LDFLAGS_SHLIB=
#LDFLAGS_SHLIB_EXPORT=

Rule SHARED_CORE=yes

################################################################
# Rules configuration
#
# These are used to let Configure know that we want certain
# functions. The format is: Rule RULE=value
#
# At present, only the following RULES are known: WANTHSREGEX, SOCKS4,
# STATUS, IRIXNIS, IRIXN32 and PARANOID.
#
# For all Rules, if set to "yes", then Configure knows we want that
# capability and does what is required to add it in. If set to "default"
# then Configure makes a "best guess"; if set to anything else, or not
# present, then nothing is done.
#
# SOCKS4:
#  If SOCKS4 is set to 'yes', be sure that you add the sock library
#  location to EXTRA_LIBS, otherwise Configure will assume
#  "-L/usr/local/lib -lsocks"
#
# STATUS:
#  If Configure determines that you are using the status_module,
#  it will automatically enable full status information if set
#  to 'yes'. If the status module is not included, having STATUS
#  set to 'yes' has no impact.
#
# IRIXNIS:
#  Only takes effect if Configure determines that you are running
#  SGI IRIX.  If you are using a (ancient) 4.x version of IRIX, you
#  need this if you are using NIS and Apache needs access to it for
#  things like mod_userdir.  This is not required on 5.x and later
#  and you should not enable it on such systems.
#
# IRIXN32:
#  If you are running a version of IRIX and Configure detects
#  n32 libraries, it will use those instead of the o32 ones.
#
# PARANOID:
#  New with version 1.3, during Configure modules can run
#  pre-programmed shell commands in the same environment that
#  Configure runs in. This allows modules to control how Configure
#  works. Normally, Configure will simply note that a module
#  is performing this function. If PARANOID is set to yes, it will
#  actually print-out the code that the modules execute
#

Rule STATUS=yes
Rule SOCKS4=no
Rule IRIXNIS=no
Rule IRIXN32=yes
Rule PARANOID=no

# The following rules should be set automatically by Configure. However, if
# they are not set by Configure (because we don't know the correct value for
# your platform), or are set incorrectly, you may override them here.
# If you have to do this, please let us know what you set and what your
# platform is, by filling out a problem report form at the Apache web site:
# <http://bugs.apache.org/>.  If your browser is forms-incapable, you
# can get the information to us by sending mail to apache-bugs@apache.org.
#
# WANTHSREGEX:
#  Apache requires a POSIX regex implementation. Henry Spencer's
#  excellent regex package is included with Apache and can be used
#  if desired. If your OS has a decent regex, you can elect to
#  not use this one by setting WANTHSREGEX to 'no' or commenting
#  out the Rule. The "default" action is "yes" unless overruled
#  by OS specifics

Rule WANTHSREGEX=default

################################################################
# Module configuration
#
# Modules are listed in reverse priority order --- the ones that come
# later can override the behavior of those that come earlier.  This
# can have visible effects; for instance, if UserDir followed Alias,
# you couldn't alias out a particular user's home directory.

# The configuration below is what we consider a decent default 
# configuration.  If you want the functionality provided by a particular
# module, remove the "#" sign at the beginning of the line. But remember, 
# the more modules you compile into the server, the larger the executable
# is and the more memory it will take, so if you are unlikely to use the
# functionality of a particular module you might wish to leave it out.

##
## Config manipulation modules
##
## mod_env sets up additional or restricted environment variables to be
## passed to CGI/SSI scripts.  It is listed first (lowest priority) since
## it does not do per-request stuff.

SharedModule modules/standard/mod_env.so

##
## Request logging modules
##

SharedModule modules/standard/mod_log_config.so

## Optional modules for NCSA user-agent/referer logging compatibility
## We recommend, however, that you just use the configurable access_log.

SharedModule modules/standard/mod_log_agent.so
SharedModule modules/standard/mod_log_referer.so

##
## Type checking modules
##
## mod_mime_magic determines the type of a file by examining a few bytes
## of it and testing against a database of filetype signatures.  It is
## based on the unix file(1) command.
## mod_mime maps filename extensions to content types, encodings, and
## "magic" type handlers (the latter is obsoleted by mod_actions, and
## don't confuse it with the previous module).
## mod_negotiation allows content selection based on the Accept* headers.

SharedModule modules/standard/mod_mime_magic.so
SharedModule modules/standard/mod_mime.so
SharedModule modules/standard/mod_negotiation.so

##
## Content delivery modules
##
## The status module allows the server to display current details about 
## how well it is performing and what it is doing.  Consider also enabling 
## STATUS=yes (see the Rules section near the start of this file) to allow
## full status information.  Check conf/access.conf on how to enable this.

SharedModule modules/standard/mod_status.so

## The Info module displays configuration information for the server and 
## all included modules. It's very useful for debugging.

SharedModule modules/standard/mod_info.so

## mod_include translates server-side include (SSI) statements in text files.
## mod_autoindex handles requests for directories which have no index file
## mod_dir handles requests on directories and directory index files.
## mod_cgi handles CGI scripts.

SharedModule modules/standard/mod_include.so
SharedModule modules/standard/mod_autoindex.so
SharedModule modules/standard/mod_dir.so
SharedModule modules/standard/mod_cgi.so

## The asis module implements ".asis" file types, which allow the embedding
## of HTTP headers at the beginning of the document.  mod_imap handles internal 
## imagemaps (no more cgi-bin/imagemap/!).  mod_actions is used to specify 
## CGI scripts which act as "handlers" for particular files, for example to
## automatically convert every GIF to another file type.

SharedModule modules/standard/mod_asis.so
SharedModule modules/standard/mod_imap.so
SharedModule modules/standard/mod_actions.so

##
## URL translation modules.
##

## The Speling module attempts to correct misspellings of URLs that
## users might have entered, namely by checking capitalizations
## or by allowing up to one misspelling (character insertion / omission /
## transposition/typo). This catches the majority of misspelled requests.
## If it finds a match, a "spelling corrected" redirection is returned.

SharedModule modules/standard/mod_speling.so

## The UserDir module for selecting resource directories by user name
## and a common prefix, e.g., /~<user> , /usr/web/<user> , etc.

SharedModule modules/standard/mod_userdir.so

## The proxy module enables the server to act as a proxy for outside
## http and ftp services. It's not as complete as it could be yet.
## NOTE: You do not want this module UNLESS you are running a proxy;
##       it is not needed for normal (origin server) operation.

SharedModule modules/proxy/libproxy.so

## The Alias module provides simple URL translation and redirection.

SharedModule modules/standard/mod_alias.so

## The URL rewriting module allows for powerful URI-to-URI and 
## URI-to-filename mapping using a regular expression based 
## rule-controlled rewriting engine.

SharedModule modules/standard/mod_rewrite.so

##
## Access control and authentication modules. 
##
SharedModule modules/standard/mod_access.so
SharedModule modules/standard/mod_auth.so

## The anon_auth module allows for anonymous-FTP-style username/ 
## password authentication.

SharedModule modules/standard/mod_auth_anon.so

## db_auth and dbm_auth work with Berkeley DB files - make sure there
## is support for DBM files on your system.  You may need to grab the GNU
## "gdbm" package if not and possibly adjust EXTRA_LIBS. (This may be
## done by Configure at a later date)

SharedModule modules/standard/mod_auth_dbm.so
SharedModule modules/standard/mod_auth_db.so

## "digest" implements HTTP Digest Authentication rather than the less 
## secure Basic Auth used by the other modules.

SharedModule modules/standard/mod_digest.so

## Optional response header manipulation modules. 
##
## cern_meta mimics the behavior of the CERN web server with regards to 
## metainformation files.  

SharedModule modules/standard/mod_cern_meta.so

## The expires module can apply Expires: headers to resources,
## as a function of access time or modification time.

SharedModule modules/standard/mod_expires.so

## The headers module can set arbitrary HTTP response headers,
## as configured in server, vhost, access.conf or .htaccess configs

SharedModule modules/standard/mod_headers.so

## Miscellaneous modules
##
## mod_usertrack is the new name for mod_cookies.  This module
## uses Netscape cookies to automatically construct and log
## click-trails from Netscape cookies, or compatible clients who
## aren't coming in via proxy.   
##
## You do not need this, or any other module to allow your site
## to use Cookies.  This module is for user tracking only

SharedModule modules/standard/mod_usertrack.so

## The example module, which demonstrates the use of the API.  See
## the file modules/example/README for details.  This module should
## only be used for testing -- DO NOT ENABLE IT on a production server.

SharedModule modules/example/mod_example.so

## mod_unique_id generates unique identifiers for each hit, which are
## available in the environment variable UNIQUE_ID.  It may not work on all
## systems, hence it is not included by default.

SharedModule modules/standard/mod_unique_id.so

## mod_so lets you add modules to Apache without recompiling.
## This is an experimental feature at this stage and only supported 
## on a subset of the platforms we generally support. 
## Don't change this entry to a 'SharedModule' variant (Bootstrapping!)

AddModule modules/standard/mod_so.o

## mod_mmap_static is an experimental module, you almost certainly
## don't need it.  It can make some webservers faster.  No further
## documentation is provided here because you'd be foolish
## to use mod_mmap_static without reading the full documentation.

SharedModule modules/experimental/mod_mmap_static.so

## mod_setenvif lets you set environment variables based on the HTTP header
## fields in the request; this is useful for conditional HTML, for example.
## Since it is also used to detect buggy browsers for workarounds, it
## should be the last (highest priority) module.

SharedModule modules/standard/mod_setenvif.so

## Local stuffs

SharedModule modules/throttle/mod_throttle.so