# APPTAINER.CONF
# This is the global configuration file for Apptainer. This file controls
# what the container is allowed to do on a particular host, and as a result
# this file must be owned by root.


# ALLOW SETUID: [BOOL]
# DEFAULT: yes
# Should we allow users to utilize the setuid program flow within Apptainer?
# note1: This is the default mode, and to utilize all features, this option
# will need to be enabled.
# note2: If this option is disabled, it will rely on the user namespace
# exclusively which has not been integrated equally between the different
# Linux distributions.
allow setuid = {{ if eq .AllowSetuid true }}yes{{ else }}no{{ end }}


# MAX LOOP DEVICES: [INT]
# DEFAULT: 256
# Set the maximum number of loop devices that Apptainer should ever attempt
# to utilize.
max loop devices = {{ .MaxLoopDevices }}


# ALLOW PID NS: [BOOL]
# DEFAULT: yes
# Should we allow users to request the PID namespace? Note that for some HPC
# resources, the PID namespace may confuse the resource manager and break how
# some MPI implementations utilize shared memory. (note, on some older
# systems, the PID namespace is always used)
allow pid ns = {{ if eq .AllowPidNs true }}yes{{ else }}no{{ end }}


# CONFIG PASSWD: [BOOL]
# DEFAULT: yes
# If /etc/passwd exists within the container, this will automatically append
# an entry for the calling user.
config passwd = {{ if eq .ConfigPasswd true }}yes{{ else }}no{{ end }}


# CONFIG GROUP: [BOOL]
# DEFAULT: yes
# If /etc/group exists within the container, this will automatically append
# group entries for the calling user.
config group = {{ if eq .ConfigGroup true }}yes{{ else }}no{{ end }}


# CONFIG RESOLV_CONF: [BOOL]
# DEFAULT: yes
# If there is a bind point within the container, use the host's
# /etc/resolv.conf.
config resolv_conf = {{ if eq .ConfigResolvConf true }}yes{{ else }}no{{ end }}


# MOUNT PROC: [BOOL]
# DEFAULT: yes
# Should we automatically bind mount /proc within the container?
mount proc = {{ if eq .MountProc true }}yes{{ else }}no{{ end }}


# MOUNT SYS: [BOOL]
# DEFAULT: yes
# Should we automatically bind mount /sys within the container?
mount sys = {{ if eq .MountSys true }}yes{{ else }}no{{ end }}


# MOUNT DEV: [yes/no/minimal]
# DEFAULT: yes
# Should we automatically bind mount /dev within the container? If 'minimal'
# is chosen, then only 'null', 'zero', 'random', 'urandom', and 'shm' will
# be included (the same effect as the --contain options)
mount dev = {{ .MountDev }}


# MOUNT DEVPTS: [BOOL]
# DEFAULT: yes
# Should we mount a new instance of devpts if there is a 'minimal'
# /dev, or -C is passed?  Note, this requires that your kernel was
# configured with CONFIG_DEVPTS_MULTIPLE_INSTANCES=y, or that you're
# running kernel 4.7 or newer.
mount devpts = {{ if eq .MountDevPts true }}yes{{ else }}no{{ end }}


# MOUNT HOME: [BOOL]
# DEFAULT: yes
# Should we automatically determine the calling user's home directory and
# attempt to mount it's base path into the container? If the --contain option
# is used, the home directory will be created within the session directory or
# can be overridden with the APPTAINER_HOME or APPTAINER_WORKDIR
# environment variables (or their corresponding command line options).
mount home = {{ if eq .MountHome true }}yes{{ else }}no{{ end }}


# MOUNT TMP: [BOOL]
# DEFAULT: yes
# Should we automatically bind mount /tmp and /var/tmp into the container? If
# the --contain option is used, both tmp locations will be created in the
# session directory or can be specified via the  APPTAINER_WORKDIR
# environment variable (or the --workingdir command line option).
mount tmp = {{ if eq .MountTmp true }}yes{{ else }}no{{ end }}


# MOUNT HOSTFS: [BOOL]
# DEFAULT: no
# Probe for all mounted file systems that are mounted on the host, and bind
# those into the container?
mount hostfs = {{ if eq .MountHostfs true }}yes{{ else }}no{{ end }}


# BIND PATH: [STRING]
# DEFAULT: Undefined
# Define a list of files/directories that should be made available from within
# the container. The file or directory must exist within the container on
# which to attach to. you can specify a different source and destination
# path (respectively) with a colon; otherwise source and dest are the same.
#bind path = /etc/apptainer/default-nsswitch.conf:/etc/nsswitch.conf
#bind path = /opt
#bind path = /scratch
{{ range $path := .BindPath }}
{{- if ne $path "" -}}
bind path = {{$path}}
{{ end -}}
{{ end }}

# USER BIND CONTROL: [BOOL]
# DEFAULT: yes
# Allow users to influence and/or define bind points at runtime? This will allow
# users to specify bind points, scratch and tmp locations. (note: User bind
# control is only allowed if the host also supports PR_SET_NO_NEW_PRIVS)
user bind control = {{ if eq .UserBindControl true }}yes{{ else }}no{{ end }}


# ENABLE OVERLAY: [yes/no/try]
# DEFAULT: try
# Enabling this option will make it possible to specify bind paths to locations
# that do not currently exist within the container.  If 'try' is chosen,
# overlayfs will be tried but if it is unavailable it will be silently ignored.
enable overlay = {{ .EnableOverlay }}


# MOUNT SLAVE: [BOOL]
# DEFAULT: yes
# Should we automatically propagate file-system changes from the host?
# This should be set to 'yes' when autofs mounts in the system should
# show up in the container.
mount slave = {{ if eq .MountSlave true }}yes{{ else }}no{{ end }}


# SESSIONDIR MAXSIZE: [STRING]
# DEFAULT: 64
# This specifies how large the default sessiondir should be (in MB) and it will
# only affect users who use the "--contain" options and don't also specify a
# location to do default read/writes to (e.g. "--workdir" or "--home").
sessiondir max size = {{ .SessiondirMaxSize }}


# LIMIT CONTAINER OWNERS: [STRING]
# DEFAULT: NULL
# Only allow containers to be used that are owned by a given user. If this
# configuration is undefined (commented or set to NULL), all containers are
# allowed to be used. This feature only applies when Apptainer is running in
# SUID mode and the user is non-root.
#limit container owners = gmk, apptainer, nobody
{{ range $index, $owners := .LimitContainerOwners }}
limit container owners = 
{{ if $index }}, {{ end }}{{$owners}}
{{- end }}

# LIMIT CONTAINER GROUPS: [STRING]
# DEFAULT: @LIMIT_CONTAINER_GROUPS_DEFAULT@
# Only allow containers to be used that are owned by a given group. If this
# configuration is undefined (commented or set to NULL), all containers are
# allowed to be used. This feature only applies when Apptainer is running in
# SUID mode and the user is non-root.
#limit container groups = group1, apptainer, nobody
{{ range $index, $groups := .LimitContainerGroups }}
limit container groups = 
{{ if $index }}, {{ end }}{{$groups}}
{{- end }}

# LIMIT CONTAINER PATHS: [STRING]
# DEFAULT: NULL
# Only allow containers to be used that are located within an allowed path
# prefix. If this configuration is undefined (commented or set to NULL),
# containers will be allowed to run from anywhere on the file system. This
# feature only applies when Apptainer is running in SUID mode and the user is
# non-root.
#limit container paths = /scratch, /tmp, /global
{{ range $index, $paths := .LimitContainerPaths }}
limit container paths = 
{{ if $index }}, {{ end }}{{$paths}}
{{- end }}

# ALLOW CONTAINER ${TYPE}: [BOOL]
# DEFAULT: yes
# This feature limits what kind of containers that Apptainer will allow
# users to use (note this does not apply for root).
allow container squashfs = {{ if eq .AllowContainerSquashfs true }}yes{{ else }}no{{ end }}
allow container extfs = {{ if eq .AllowContainerExtfs true }}yes{{ else }}no{{ end }}
allow container dir = {{ if eq .AllowContainerDir true }}yes{{ else }}no{{ end }}


# ALWAYS USE NV ${TYPE}: [BOOL]
# DEFAULT: no
# This feature allows an administrator to determine that every action command
# should be executed implicitly with the --nv option (useful for GPU only 
# environments). 
always use nv = {{ if eq .AlwaysUseNv true }}yes{{ else }}no{{ end }}


# ROOT DEFAULT CAPABILITIES: [full/file/no]
# DEFAULT: full
# Define default root capability set kept during runtime
# - full: keep all capabilities (same as --keep-privs)
# - file: keep capabilities configured for root in
#         ${prefix}/etc/apptainer/capability.json
# - no: no capabilities (same as --no-privs)
root default capabilities = {{ .RootDefaultCapabilities }}


# MEMORY FS TYPE: [tmpfs/ramfs]
# DEFAULT: tmpfs
# This feature allow to choose temporary filesystem type used by Apptainer.
# Cray CLE 5 and 6 up to CLE 6.0.UP05 there is an issue (kernel panic) when Apptainer
# use tmpfs, so on affected version it's recommended to set this value to ramfs to avoid
# kernel panic
memory fs type = {{ .MemoryFSType }}