File: aprx-rxigate.conf.in

package info (click to toggle)
aprx 2.9.0+dfsg-2
  • links: PTS, VCS
  • area: main
  • in suites: bullseye, buster, sid
  • size: 2,352 kB
  • sloc: ansic: 15,809; sh: 598; makefile: 160
file content (118 lines) | stat: -rw-r--r-- 3,436 bytes parent folder | download | duplicates (2)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
#
# Minimal sample configuration file for the APRX-2 as Rx-only iGate.
#
# This configuration is structured with Apache HTTPD style tags
# which then contain subsystem parameters.
#

#
# For simple case, you need to adjust 4 things:
#   - Mycall parameter
#   - Select correct type of interface (ax25-device or serial-device)
#   - Optionally set a beacon telling where this system is
#   - Optionally enable digipeater with or without tx-igate
#

#
# Define the parameters in following order:
#   1)  mycall
#   2)  <aprsis>     ** one
#   3)  <logging>    ** one
#   4)  <interface>  ** possibly multiple for each of radio receivers
#

#
# Global macro for simplified callsign definition:
# Usable for 99+% of cases.
#

mycall  N0CALL-1

<aprsis>
#login     OTHERCALL-7	# login defaults to $mycall

# APRS-IS server name and optional portnumber.
# Default port is 14580, and it should be enough for you.

server    rotate.aprs2.net

#server   euro.aprs2.net
#server   asia.aprs2.net
#server   noam.aprs2.net
#server   soam.aprs2.net
#server   aunz.aprs2.net

#
# Passcode for your callsign
#
passcode -1

</aprsis>

<logging>

# rflog defines a rotatable file into which all RF-received packets
# are logged.  The host system can rotate it at any time without
# need to signal the aprx that the file has been moved.
#
# rflog @VARLOG@/aprx-rf.log

# aprxlog defines a rotatable file into which most important 
# events on APRS-IS connection are logged, namely connects and
# disconnects.  The host system can rotate it at any time without
# need to signal the aprx that the file has been moved.
#
# aprxlog @VARLOG@/aprx.log

</logging>


# ***********  Multiple <interface> definitions can follow   *********

# ax25-device  Lists AX.25 ports by their callsigns that in Linux
#              systems receive APRS packets.  If none are defined,
#              or the system is not Linux, the AX.25 network receiver
#              is not enabled.  Used technologies need at least
#              Linux kernel 2.4.x
#
# tx-ok        Boolean telling if this device is able to transmit.
#

#<interface>
#   ax25-device $mycall
#   #tx-ok      false  # transmitter enable defaults to false
#</interface>


#
# The  TNC serial  options.  Parameters are:
#   - /dev/ttyUSB1    -- tty device
#   - 19200           -- baud rate, supported ones are:
#                        1200, 2400, 4800, 9600, 19200, 38400
#   - 8n1             -- 8-bits, no parity, one stop-bit,
#                        no other supported modes
#   - "KISS"                  - plain basic KISS mode
#   - "XORSUM" alias "BPQCRC" - KISS with BPQ "CRC" byte
#   - "SMACK"  alias "CRC16"  - KISS with real CRC
#   - "FLEXNET"               - KISS with real CRC
#   - "TNC2"                  - TNC2 monitor format
#   - "DPRS"                  - DPRS (RX) GW
#

#<interface>
#   serial-device /dev/ttyUSB0  19200 8n1    KISS
#   #callsign     $mycall  # callsign defaults to $mycall
#   #tx-ok        false    # transmitter enable defaults to false
#</interface>

#<interface>
#   serial-device /dev/ttyUSB1  19200 8n1    TNC2
#   #callsign     $mycall  # callsign defaults to $mycall
#   #tx-ok        false    # TNC2 monitor can not have transmitter
#</interface>

#<interface>
#   serial-device /dev/ttyUSB1  19200 8n1    DPRS
#   callsign     dprsgwcallsign  # must define actual callsign
#   #tx-ok       false           # DPRS monitor can not do transmit
#</interface>