1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
|
Template: debian-installer/arcboot-installer/title
Type: text
_Description: Install the Arcboot boot loader on a hard disk
# Beware, this one is shared with arcboot
Template: arcboot/boot_device
Type: string
Default: /dev/sda
_Description: Disk for boot loader installation:
Arcboot must be installed into the volume header of a disk with a SGI
disklabel. Usually the volume header of /dev/sda is used. Please give
the device name of the disk on which to put arcboot.
Template: arcboot-installer/serial-console
Type: note
_Description: Arcboot configured to use a serial console
Arcboot is configured to use the serial port ${PORT} as the console.
The serial port speed is set to ${SPEED}.
Template: arcboot-installer/apt-install-failed
Type: boolean
_Description: Arcboot installation failed. Continue anyway?
The arcboot package failed to install into /target/. Installing Arcboot
as a boot loader is a required step. The install problem might however be
unrelated to Arcboot, so continuing the installation may be possible.
Template: arcboot-installer/prom-variables
Type: note
_Description: Setting PROM variables for Arcboot
If this is the first Linux installation on this machine, or if the
hard drives have been repartitioned, some variables need to be set
in the PROM before the system is able to boot normally.
.
At the end of this installation stage, the system will reboot. After this,
enter the command monitor from the "Stop for Maintenance" option,
and enter the following commands:
.
setenv SystemPartition scsi(${BOOTBUS})disk(${BOOTID})rdisk(${BOOTLUN})partition(8)
setenv OSLoadPartition scsi(${ROOTBUS})disk(${ROOTID})rdisk(${ROOTLUN})partition(${ROOTPART})
setenv OSLoader arcboot
setenv OSLoadFilename Linux
.
You will only need to do this once. Afterwards, enter the "boot" command
or reboot the system to proceed to the next Debian installation stage.
|
