1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350
|
/*
* Asterisk -- An open source telephony toolkit.
*
* Based on frompcm.c and topcm.c from the Emiliano MIPL browser/
* interpreter. See http://www.bsdtelephony.com.mx
*
* Copyright (c) 2001 - 2005 Digium, Inc.
* All rights reserved.
*
* Karl Sackett <krs@linux-support.net>, 2001-03-21
*
* See http://www.asterisk.org for more information about
* the Asterisk project. Please do not directly contact
* any of the maintainers of this project for assistance;
* the project provides a web site, mailing lists and IRC
* channels for your use.
*
* This program is free software, distributed under the terms of
* the GNU General Public License Version 2. See the LICENSE file
* at the top of the source tree.
*/
/*! \file
*
* \brief codec_adpcm.c - translate between signed linear and Dialogic ADPCM
*
* \ingroup codecs
*/
/*** MODULEINFO
<support_level>core</support_level>
***/
#include "asterisk.h"
ASTERISK_FILE_VERSION(__FILE__, "$Revision: 328259 $")
#include "asterisk/lock.h"
#include "asterisk/linkedlists.h"
#include "asterisk/module.h"
#include "asterisk/config.h"
#include "asterisk/translate.h"
#include "asterisk/utils.h"
/* define NOT_BLI to use a faster but not bit-level identical version */
/* #define NOT_BLI */
#define BUFFER_SAMPLES 8096 /* size for the translation buffers */
/* Sample frame data */
#include "asterisk/slin.h"
#include "ex_adpcm.h"
/*
* Step size index shift table
*/
static int indsft[8] = { -1, -1, -1, -1, 2, 4, 6, 8 };
/*
* Step size table, where stpsz[i]=floor[16*(11/10)^i]
*/
static int stpsz[49] = {
16, 17, 19, 21, 23, 25, 28, 31, 34, 37, 41, 45, 50, 55, 60, 66, 73,
80, 88, 97, 107, 118, 130, 143, 157, 173, 190, 209, 230, 253, 279,
307, 337, 371, 408, 449, 494, 544, 598, 658, 724, 796, 876, 963,
1060, 1166, 1282, 1411, 1552
};
/*
* Decoder/Encoder state
* States for both encoder and decoder are synchronized
*/
struct adpcm_state {
int ssindex;
int signal;
int zero_count;
int next_flag;
};
/*
* Decode(encoded)
* Decodes the encoded nibble from the adpcm file.
*
* Results:
* Returns the encoded difference.
*
* Side effects:
* Sets the index to the step size table for the next encode.
*/
static inline short decode(int encoded, struct adpcm_state *state)
{
int diff;
int step;
int sign;
step = stpsz[state->ssindex];
sign = encoded & 0x08;
encoded &= 0x07;
#ifdef NOT_BLI
diff = (((encoded << 1) + 1) * step) >> 3;
#else /* BLI code */
diff = step >> 3;
if (encoded & 4)
diff += step;
if (encoded & 2)
diff += step >> 1;
if (encoded & 1)
diff += step >> 2;
if ((encoded >> 1) & step & 0x1)
diff++;
#endif
if (sign)
diff = -diff;
if (state->next_flag & 0x1)
state->signal -= 8;
else if (state->next_flag & 0x2)
state->signal += 8;
state->signal += diff;
if (state->signal > 2047)
state->signal = 2047;
else if (state->signal < -2047)
state->signal = -2047;
state->next_flag = 0;
#ifdef AUTO_RETURN
if (encoded)
state->zero_count = 0;
else if (++(state->zero_count) == 24) {
state->zero_count = 0;
if (state->signal > 0)
state->next_flag = 0x1;
else if (state->signal < 0)
state->next_flag = 0x2;
}
#endif
state->ssindex += indsft[encoded];
if (state->ssindex < 0)
state->ssindex = 0;
else if (state->ssindex > 48)
state->ssindex = 48;
return state->signal << 4;
}
/*
* Adpcm
* Takes a signed linear signal and encodes it as ADPCM
* For more information see http://support.dialogic.com/appnotes/adpcm.pdf
*
* Results:
* Foo.
*
* Side effects:
* signal gets updated with each pass.
*/
static inline int adpcm(short csig, struct adpcm_state *state)
{
int diff;
int step;
int encoded;
/*
* Clip csig if too large or too small
*/
csig >>= 4;
step = stpsz[state->ssindex];
diff = csig - state->signal;
#ifdef NOT_BLI
if (diff < 0) {
encoded = (-diff << 2) / step;
if (encoded > 7)
encoded = 7;
encoded |= 0x08;
} else {
encoded = (diff << 2) / step;
if (encoded > 7)
encoded = 7;
}
#else /* BLI code */
if (diff < 0) {
encoded = 8;
diff = -diff;
} else
encoded = 0;
if (diff >= step) {
encoded |= 4;
diff -= step;
}
step >>= 1;
if (diff >= step) {
encoded |= 2;
diff -= step;
}
step >>= 1;
if (diff >= step)
encoded |= 1;
#endif /* NOT_BLI */
/* feedback to state */
decode(encoded, state);
return encoded;
}
/*----------------- Asterisk-codec glue ------------*/
/*! \brief Workspace for translating signed linear signals to ADPCM. */
struct adpcm_encoder_pvt {
struct adpcm_state state;
int16_t inbuf[BUFFER_SAMPLES]; /* Unencoded signed linear values */
};
/*! \brief Workspace for translating ADPCM signals to signed linear. */
struct adpcm_decoder_pvt {
struct adpcm_state state;
};
/*! \brief decode 4-bit adpcm frame data and store in output buffer */
static int adpcmtolin_framein(struct ast_trans_pvt *pvt, struct ast_frame *f)
{
struct adpcm_decoder_pvt *tmp = pvt->pvt;
int x = f->datalen;
unsigned char *src = f->data.ptr;
int16_t *dst = pvt->outbuf.i16 + pvt->samples;
while (x--) {
*dst++ = decode((*src >> 4) & 0xf, &tmp->state);
*dst++ = decode(*src++ & 0x0f, &tmp->state);
}
pvt->samples += f->samples;
pvt->datalen += 2*f->samples;
return 0;
}
/*! \brief fill input buffer with 16-bit signed linear PCM values. */
static int lintoadpcm_framein(struct ast_trans_pvt *pvt, struct ast_frame *f)
{
struct adpcm_encoder_pvt *tmp = pvt->pvt;
memcpy(&tmp->inbuf[pvt->samples], f->data.ptr, f->datalen);
pvt->samples += f->samples;
return 0;
}
/*! \brief convert inbuf and store into frame */
static struct ast_frame *lintoadpcm_frameout(struct ast_trans_pvt *pvt)
{
struct adpcm_encoder_pvt *tmp = pvt->pvt;
struct ast_frame *f;
int i;
int samples = pvt->samples; /* save original number */
if (samples < 2)
return NULL;
pvt->samples &= ~1; /* atomic size is 2 samples */
for (i = 0; i < pvt->samples; i += 2) {
pvt->outbuf.c[i/2] =
(adpcm(tmp->inbuf[i ], &tmp->state) << 4) |
(adpcm(tmp->inbuf[i+1], &tmp->state) );
};
f = ast_trans_frameout(pvt, pvt->samples/2, 0);
/*
* If there is a left over sample, move it to the beginning
* of the input buffer.
*/
if (samples & 1) { /* move the leftover sample at beginning */
tmp->inbuf[0] = tmp->inbuf[samples - 1];
pvt->samples = 1;
}
return f;
}
static struct ast_translator adpcmtolin = {
.name = "adpcmtolin",
.framein = adpcmtolin_framein,
.sample = adpcm_sample,
.desc_size = sizeof(struct adpcm_decoder_pvt),
.buffer_samples = BUFFER_SAMPLES,
.buf_size = BUFFER_SAMPLES * 2,
};
static struct ast_translator lintoadpcm = {
.name = "lintoadpcm",
.framein = lintoadpcm_framein,
.frameout = lintoadpcm_frameout,
.sample = slin8_sample,
.desc_size = sizeof (struct adpcm_encoder_pvt),
.buffer_samples = BUFFER_SAMPLES,
.buf_size = BUFFER_SAMPLES/ 2, /* 2 samples per byte */
};
/*! \brief standard module glue */
static int reload(void)
{
return AST_MODULE_LOAD_SUCCESS;
}
static int unload_module(void)
{
int res;
res = ast_unregister_translator(&lintoadpcm);
res |= ast_unregister_translator(&adpcmtolin);
return res;
}
static int load_module(void)
{
int res;
ast_format_set(&adpcmtolin.src_format, AST_FORMAT_ADPCM, 0);
ast_format_set(&adpcmtolin.dst_format, AST_FORMAT_SLINEAR, 0);
ast_format_set(&lintoadpcm.src_format, AST_FORMAT_SLINEAR, 0);
ast_format_set(&lintoadpcm.dst_format, AST_FORMAT_ADPCM, 0);
res = ast_register_translator(&adpcmtolin);
if (!res)
res = ast_register_translator(&lintoadpcm);
else
ast_unregister_translator(&adpcmtolin);
if (res)
return AST_MODULE_LOAD_FAILURE;
return AST_MODULE_LOAD_SUCCESS;
}
AST_MODULE_INFO(ASTERISK_GPL_KEY, AST_MODFLAG_DEFAULT, "Adaptive Differential PCM Coder/Decoder",
.load = load_module,
.unload = unload_module,
.reload = reload,
);
|