# $Id: NEWS 375 2018-10-15 21:47:01Z joerg_wunsch $

Summary of changes since AVaRICE 2.13
==================================

. Replace the USB daemon by Posix threads (bug #15).

. Implement JTAGICE3 handling

. Implement Atmel-ICE handling, including JTAGICE3 with firmware
  version 3.x, EDBG and mEDBG integrated debuggers

. Implement the GDB 7+ flash write protocol (for the "load" command)

. Implement a backend command for the GDB "monitor" command; by
  now, this is mostly a stub, but "monitor help" and "monitor
  version" are already around.

. New devices: ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2,
  ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2

. Bugfix: support software breakpoints on ATmega48P, ATmega88P,
  ATmega168P, ATmega328P, ATtiny24, ATtiny44, ATtiny84


Summary of changes in AVaRICE 2.13
==================================

. Rearrange the entire error handling to use exceptions, rather than a
  mix between error code returns, and prematurely exiting the program
  from deep inside, without any attempt to cleanup the JTAG ICE
  connection status.  This is a lot cleaner now, with a much reduced
  chance to leave the ICE in an unworkable state when exiting the
  program.

. New devices: ATxmega128B1, ATxmega128B3, ATxmega64B1, ATxmega64B3,
  ATmega16M1, ATmega64M1, ATmega64C1, ATxmega128A3, ATxmega32A4

. Deprecate target programming (downloading) from the ELF file.  It
  must be explicitly enabled now by the --enable-target-programming
  configure option.  If not enabled, AVaRICE no longer depends on
  libbfd and its prerequisites.  Use AVRDUDE for device programming.

. Added IO register definitions (for GDB's "info io_registers"
  command) for the following devices: ATmega323, ATmega64, AT90CAN128,
  ATmega164p, ATmega324p, ATmega644, ATmega325, ATmega3250, ATmega645,
  ATmega6450, ATmega329, ATmega3290, ATmega649, ATmega6490, ATmega640,
  ATmega1280, ATmega1281, ATmega2560, ATmega2561, ATmega48, ATmega88,
  ATmega168, ATtiny13, ATtiny2313, AT90PWM2, AT90PWM3, AT90PWM2B,
  AT90PWM3B, ATmega32M1, ATmega32C1, ATtiny24, ATtiny44, ATtiny84,
  ATtiny25, ATtiny45, ATtiny85, ATtiny261, ATtiny461, ATtiny861,
  AT90CAN32, AT90CAN64, AT90PWM216, AT90PWM316, AT90USB1287,
  AT90USB162, AT90USB646, AT90USB647, ATmega1284P, ATmega165,
  ATmega165P, ATmega168P, ATmega16HVA, ATmega3250P, ATmega325P,
  ATmega328P, ATmega3290P, ATmega329P, ATmega32HVB, ATmega32U4,
  ATmega406, ATmega48P, ATmega644P, ATmega88P, ATtiny167, ATtiny43U,
  ATtiny48, ATtiny88, ATmega128RFA1

=====================================================================

Summary of changes in AVaRICE 2.12
==================================

. Many Xmega fixes for firmware versions 7 and above (as shipping by
  AVR Studio 5); code breakpoints and accessing the various Xmega
  memories appear to almost work now.  Many thanks to Detlev Kraft for
  his in-depth analysis of the AVR Studio 5 communiction with the ICE.

. Cache the PC returned by BREAK events, to speedup the communication.

. New devices: ATxmega256A3, ATxmega16D4, ATtiny4313

. Moved source code repository from CVS to SVN.

. Implement PDI debugging (JTAGICEmkII / Xmega).

=====================================================================

Summary of changes in AVaRICE 2.11
==================================

. Fixed an annoying error that prevented it from compiling on recent
  versions of GCC.

. Fixed *all* warnings, making the code -Wall -Wextra safe, so they
  can be enabled by default now.  GCC 3.x users might want to run
  configure with --disable-warnings though, as some of the warnings
  are suppressed by GCC 4.x pragmas.

=====================================================================

Summary of changes in AVaRICE 2.10
==================================

Important bug fixes:
--------------------

. Add a check for the requirement to link against libz in order
  to successfully work with libbfd.  That appears to be necessary
  for GNU binutils >= 2.19.

=====================================================================

Summary of changes in AVaRICE 2.9
=================================

New CPU support added:
----------------------

. ATmega128RFA1

=====================================================================
Summary of changes in AVaRICE 2.8
=================================

New CPU support added:
----------------------

. ATtiny84 and ATtiny85 (debugWIRE devices)
. ATmega32C1, ATmega32M1
. AT90PWM316, AT90USB162, AT90USB646, AT90USB647, ATmega1284P,
  ATmega165, ATmega165P, ATmega168P, ATmega16HVA, ATmega3250P,
  ATmega325P, ATmega328P, ATmega3290P, ATmega329P, ATmega32HVB,
  ATmega32U4, ATmega406, ATmega48P, ATmega644P, ATmega88P, ATtiny167,
  ATtiny43U, ATtiny48, ATtiny88, ATXmega128A1

New features added:
-------------------

. External reset through nSRST (option -R/--reset-srst)

. Handle ICE events (intelligently) beyond just BREAK events

. Option -k/--known-devices to print all known devices

. Default bitrate decreased to 250 kHz to comply with most AVRs
  shipping with a CPU frequency of 1 MHz


Summary of important bug fixes:
-------------------------------

. Fix a bug with single-stepping on the JTAG ICE mkII or AVR Dragon.
  The bug could eventually result in a "Cannot read program counter"
  message.

. Fix a sign-extension bug in the length calculation of received JTAG
  ICE mkII packets that could result in a C++ allocation error.

. [ 1869060 ] jtag daisy chain bits limitations

. [ 1833342 ] useless warning message about jtag bitrate using dragon

. [ 1831392 ] --jtag option does not default to usb using dragon

. [ patch 1750202 ] set parameter command failed

. [ 1865183 ] bfd.h not used for checking of libbfd

. [ 1880464 ] AVR-Dragon needs libusb-dev

. [ 1833340 ] cannot read program counter/Watchdog has expired


=====================================================================
Summary of changes in AVaRICE 2.7
=================================

New CPU support added:
----------------------

. AT90PWM2B/AT90PWM3B (same as AT90PWM2/3 but different signature)
. ATmega325/3250/645/6450

New features added:
-------------------

. Software breakpoints are now also supported when using JTAG.

Summary of important bug fixes:
-------------------------------

. Complete overhaul of the USB communication, making it much more
  robust, and less resource-consuming.

. DebugWire bug fix submittted by Shaun Jackman.


=====================================================================
Summary of changes in AVaRICE 2.6
=================================

New CPU support added:
----------------------

. ATmega164P/324P (removed non-existing ATmega164/324)

New features added:
-------------------

. Support of the AVR Dragon (both, JTAG and debugWire)

Summary of important bug fixes:
-------------------------------

. Don't fork the USB daemon with the libusb handle open;
  instead, re-open the connection in the child.  Fixes issues
  with MacOS X and Cygwin.

=====================================================================
Summary of changes in AVaRICE 2.5
=================================

New CPU support added:
----------------------

. AT90USB1287
. ATmega2560/2561
. debugWIRE AVRs (ATmega48/88/168, ATtiny13, ATtiny2313, AT90PWM2/3,
  ATtiny24/44, ATtiny25/45, ATtiny261/461/861)

New features added:
-------------------

. JTAG daisy chainging
. basic debugWIRE support (still limited to four breakpoints; known
  to occasionally cause trouble over USB, works better over RS-232)

Summary of important bug fixes:
-------------------------------

. fix ucAllowFullPageBitstream for ATmega640/1280/1281, AT90CAN128
. fix device descriptors, in particular EEPROM access on recent AVRs

=====================================================================
[Versions up to AVaRICE 2.4 did not have a NEWS file entry.]