1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762
|
/*
* avrdude - A Downloader/Uploader for AVR device programmers
* Copyright (C) 2003-2004 Theodore A. Roth <troth@openavr.org>
* Copyright (C) 2005, 2007 Joerg Wunsch <j@uriah.heep.sax.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/* $Id: butterfly.c 1321 2014-06-13 20:07:40Z awachtler $ */
/*
* avrdude interface for the serial programming mode of the Atmel butterfly
* evaluation board. This board features a bootloader which uses a protocol
* very similar, but not identical, to the one described in application note
* avr910.
*
* Actually, the butterfly uses a predecessor of the avr910 protocol
* which is described in application notes avr109 (generic AVR
* bootloader) and avr911 (opensource programmer). This file now
* fully handles the features present in avr109. It should probably
* be renamed to avr109, but we rather stick with the old name inside
* the file. We'll provide aliases for "avr109" and "avr911" in
* avrdude.conf so users could call it by these name as well.
*/
#include "ac_cfg.h"
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <errno.h>
#include <ctype.h>
#include <unistd.h>
#include "avrdude.h"
#include "libavrdude.h"
#include "butterfly.h"
/*
* Private data for this programmer.
*/
struct pdata
{
char has_auto_incr_addr;
unsigned int buffersize;
};
#define PDATA(pgm) ((struct pdata *)(pgm->cookie))
static void butterfly_setup(PROGRAMMER * pgm)
{
if ((pgm->cookie = malloc(sizeof(struct pdata))) == 0) {
avrdude_message(MSG_INFO, "%s: butterfly_setup(): Out of memory allocating private data\n",
progname);
exit(1);
}
memset(pgm->cookie, 0, sizeof(struct pdata));
}
static void butterfly_teardown(PROGRAMMER * pgm)
{
free(pgm->cookie);
}
static int butterfly_send(PROGRAMMER * pgm, char * buf, size_t len)
{
return serial_send(&pgm->fd, (unsigned char *)buf, len);
}
static int butterfly_recv(PROGRAMMER * pgm, char * buf, size_t len)
{
int rv;
rv = serial_recv(&pgm->fd, (unsigned char *)buf, len);
if (rv < 0) {
avrdude_message(MSG_INFO, "%s: butterfly_recv(): programmer is not responding\n",
progname);
return -1;
}
return 0;
}
static int butterfly_drain(PROGRAMMER * pgm, int display)
{
return serial_drain(&pgm->fd, display);
}
static int butterfly_vfy_cmd_sent(PROGRAMMER * pgm, char * errmsg)
{
char c;
butterfly_recv(pgm, &c, 1);
if (c != '\r') {
avrdude_message(MSG_INFO, "%s: error: programmer did not respond to command: %s\n",
progname, errmsg);
return -1;
}
return 0;
}
static int butterfly_rdy_led(PROGRAMMER * pgm, int value)
{
/* Do nothing. */
return 0;
}
static int butterfly_err_led(PROGRAMMER * pgm, int value)
{
/* Do nothing. */
return 0;
}
static int butterfly_pgm_led(PROGRAMMER * pgm, int value)
{
/* Do nothing. */
return 0;
}
static int butterfly_vfy_led(PROGRAMMER * pgm, int value)
{
/* Do nothing. */
return 0;
}
/*
* issue the 'chip erase' command to the butterfly board
*/
static int butterfly_chip_erase(PROGRAMMER * pgm, AVRPART * p)
{
butterfly_send(pgm, "e", 1);
if (butterfly_vfy_cmd_sent(pgm, "chip erase") < 0)
return -1;
return 0;
}
static void butterfly_enter_prog_mode(PROGRAMMER * pgm)
{
butterfly_send(pgm, "P", 1);
butterfly_vfy_cmd_sent(pgm, "enter prog mode");
}
static void butterfly_leave_prog_mode(PROGRAMMER * pgm)
{
butterfly_send(pgm, "L", 1);
butterfly_vfy_cmd_sent(pgm, "leave prog mode");
}
/*
* issue the 'program enable' command to the AVR device
*/
static int butterfly_program_enable(PROGRAMMER * pgm, AVRPART * p)
{
return -1;
}
/*
* apply power to the AVR processor
*/
static void butterfly_powerup(PROGRAMMER * pgm)
{
/* Do nothing. */
return;
}
/*
* remove power from the AVR processor
*/
static void butterfly_powerdown(PROGRAMMER * pgm)
{
/* Do nothing. */
return;
}
#define IS_BUTTERFLY_MK 0x0001
/*
* initialize the AVR device and prepare it to accept commands
*/
static int butterfly_initialize(PROGRAMMER * pgm, AVRPART * p)
{
char id[8];
char sw[2];
char hw[2];
char buf[10];
char type;
char c, devtype_1st;
/*
* Send some ESC to activate butterfly bootloader. This is not needed
* for plain avr109 bootloaders but does not harm there either.
*/
avrdude_message(MSG_INFO, "Connecting to programmer: ");
if (pgm->flag & IS_BUTTERFLY_MK)
{
char mk_reset_cmd[6] = {"#aR@S\r"};
unsigned char mk_timeout = 0;
putc('.', stderr);
butterfly_send(pgm, mk_reset_cmd, sizeof(mk_reset_cmd));
usleep(20000);
do
{
c = 27;
butterfly_send(pgm, &c, 1);
usleep(20000);
c = 0xaa;
usleep(80000);
butterfly_send(pgm, &c, 1);
if (mk_timeout % 10 == 0) putc('.', stderr);
} while (mk_timeout++ < 10);
butterfly_recv(pgm, &c, 1);
if ( c != 'M' && c != '?')
{
avrdude_message(MSG_INFO, "\nConnection FAILED.");
return -1;
}
else
{
id[0] = 'M'; id[1] = 'K'; id[2] = '2'; id[3] = 0;
}
}
else
{
do {
putc('.', stderr);
butterfly_send(pgm, "\033", 1);
butterfly_drain(pgm, 0);
butterfly_send(pgm, "S", 1);
butterfly_recv(pgm, &c, 1);
if (c != '?') {
putc('\n', stderr);
/*
* Got a useful response, continue getting the programmer
* identifier. Programmer returns exactly 7 chars _without_
* the null.
*/
id[0] = c;
butterfly_recv(pgm, &id[1], sizeof(id)-2);
id[sizeof(id)-1] = '\0';
}
} while (c == '?');
}
/* Get the HW and SW versions to see if the programmer is present. */
butterfly_drain(pgm, 0);
butterfly_send(pgm, "V", 1);
butterfly_recv(pgm, sw, sizeof(sw));
butterfly_send(pgm, "v", 1);
butterfly_recv(pgm, hw, 1); /* first, read only _one_ byte */
if (hw[0]!='?') {
butterfly_recv(pgm, &hw[1], 1);/* now, read second byte */
};
/* Get the programmer type (serial or parallel). Expect serial. */
butterfly_send(pgm, "p", 1);
butterfly_recv(pgm, &type, 1);
avrdude_message(MSG_INFO, "Found programmer: Id = \"%s\"; type = %c\n", id, type);
avrdude_message(MSG_INFO, " Software Version = %c.%c; ", sw[0], sw[1]);
if (hw[0]=='?') {
avrdude_message(MSG_INFO, "No Hardware Version given.\n");
} else {
avrdude_message(MSG_INFO, "Hardware Version = %c.%c\n", hw[0], hw[1]);
};
/* See if programmer supports autoincrement of address. */
butterfly_send(pgm, "a", 1);
butterfly_recv(pgm, &PDATA(pgm)->has_auto_incr_addr, 1);
if (PDATA(pgm)->has_auto_incr_addr == 'Y')
avrdude_message(MSG_INFO, "Programmer supports auto addr increment.\n");
/* Check support for buffered memory access, abort if not available */
butterfly_send(pgm, "b", 1);
butterfly_recv(pgm, &c, 1);
if (c != 'Y') {
avrdude_message(MSG_INFO, "%s: error: buffered memory access not supported. Maybe it isn't\n"\
"a butterfly/AVR109 but a AVR910 device?\n", progname);
return -1;
};
butterfly_recv(pgm, &c, 1);
PDATA(pgm)->buffersize = (unsigned int)(unsigned char)c<<8;
butterfly_recv(pgm, &c, 1);
PDATA(pgm)->buffersize += (unsigned int)(unsigned char)c;
avrdude_message(MSG_INFO, "Programmer supports buffered memory access with buffersize=%i bytes.\n",
PDATA(pgm)->buffersize);
/* Get list of devices that the programmer supports. */
butterfly_send(pgm, "t", 1);
avrdude_message(MSG_INFO, "\nProgrammer supports the following devices:\n");
devtype_1st = 0;
while (1) {
butterfly_recv(pgm, &c, 1);
if (devtype_1st == 0)
devtype_1st = c;
if (c == 0)
break;
avrdude_message(MSG_INFO, " Device code: 0x%02x\n", (unsigned int)(unsigned char)c);
};
avrdude_message(MSG_INFO, "\n");
/* Tell the programmer which part we selected.
According to the AVR109 code, this is ignored by the bootloader. As
some early versions might not properly ignore it, rather pick up the
first device type as reported above than anything out of avrdude.conf,
so to avoid a potential conflict. There appears to be no general
agreement on AVR910 device IDs beyond the ones from the original
appnote 910. */
buf[0] = 'T';
buf[1] = devtype_1st;
butterfly_send(pgm, buf, 2);
if (butterfly_vfy_cmd_sent(pgm, "select device") < 0)
return -1;
if (verbose)
avrdude_message(MSG_INFO, "%s: devcode selected: 0x%02x\n",
progname, (unsigned)buf[1]);
butterfly_enter_prog_mode(pgm);
butterfly_drain(pgm, 0);
return 0;
}
static void butterfly_disable(PROGRAMMER * pgm)
{
butterfly_leave_prog_mode(pgm);
return;
}
static void butterfly_enable(PROGRAMMER * pgm)
{
return;
}
static int butterfly_open(PROGRAMMER * pgm, char * port)
{
union pinfo pinfo;
strcpy(pgm->port, port);
/*
* If baudrate was not specified use 19200 Baud
*/
if(pgm->baudrate == 0) {
pgm->baudrate = 19200;
}
pinfo.baud = pgm->baudrate;
if (serial_open(port, pinfo, &pgm->fd)==-1) {
return -1;
}
/*
* drain any extraneous input
*/
butterfly_drain (pgm, 0);
return 0;
}
static void butterfly_close(PROGRAMMER * pgm)
{
/* "exit programmer" */
butterfly_send(pgm, "E", 1);
butterfly_vfy_cmd_sent(pgm, "exit bootloader");
serial_close(&pgm->fd);
pgm->fd.ifd = -1;
}
static void butterfly_display(PROGRAMMER * pgm, const char * p)
{
return;
}
static void butterfly_set_addr(PROGRAMMER * pgm, unsigned long addr)
{
char cmd[3];
cmd[0] = 'A';
cmd[1] = (addr >> 8) & 0xff;
cmd[2] = addr & 0xff;
butterfly_send(pgm, cmd, sizeof(cmd));
butterfly_vfy_cmd_sent(pgm, "set addr");
}
static void butterfly_set_extaddr(PROGRAMMER * pgm, unsigned long addr)
{
char cmd[4];
cmd[0] = 'H';
cmd[1] = (addr >> 16) & 0xff;
cmd[2] = (addr >> 8) & 0xff;
cmd[3] = addr & 0xff;
butterfly_send(pgm, cmd, sizeof(cmd));
butterfly_vfy_cmd_sent(pgm, "set extaddr");
}
static int butterfly_write_byte(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
unsigned long addr, unsigned char value)
{
char cmd[6];
int size;
int use_ext_addr = m->op[AVR_OP_LOAD_EXT_ADDR] != NULL;
if ((strcmp(m->desc, "flash") == 0) || (strcmp(m->desc, "eeprom") == 0))
{
cmd[0] = 'B';
cmd[1] = 0;
if ((cmd[3] = toupper((int)(m->desc[0]))) == 'E') { /* write to eeprom */
cmd[2] = 1;
cmd[4] = value;
size = 5;
} else { /* write to flash */
/* @@@ not yet implemented */
cmd[2] = 2;
size = 6;
return -1;
}
if (use_ext_addr) {
butterfly_set_extaddr(pgm, addr);
} else {
butterfly_set_addr(pgm, addr);
}
}
else if (strcmp(m->desc, "lock") == 0)
{
cmd[0] = 'l';
cmd[1] = value;
size = 2;
}
else
return -1;
butterfly_send(pgm, cmd, size);
if (butterfly_vfy_cmd_sent(pgm, "write byte") < 0)
return -1;
return 0;
}
static int butterfly_read_byte_flash(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
unsigned long addr, unsigned char * value)
{
static int cached = 0;
static unsigned char cvalue;
static unsigned long caddr;
int use_ext_addr = m->op[AVR_OP_LOAD_EXT_ADDR] != NULL;
if (cached && ((caddr + 1) == addr)) {
*value = cvalue;
cached = 0;
}
else {
char buf[2];
if (use_ext_addr) {
butterfly_set_extaddr(pgm, addr >> 1);
} else {
butterfly_set_addr(pgm, addr >> 1);
}
butterfly_send(pgm, "g\000\002F", 4);
/* Read back the program mem word (MSB first) */
butterfly_recv(pgm, buf, sizeof(buf));
if ((addr & 0x01) == 0) {
*value = buf[0];
cached = 1;
cvalue = buf[1];
caddr = addr;
}
else {
*value = buf[1];
}
}
return 0;
}
static int butterfly_read_byte_eeprom(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
unsigned long addr, unsigned char * value)
{
butterfly_set_addr(pgm, addr);
butterfly_send(pgm, "g\000\001E", 4);
butterfly_recv(pgm, (char *)value, 1);
return 0;
}
static int butterfly_page_erase(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m, unsigned int addr)
{
if (strcmp(m->desc, "flash") == 0)
return -1; /* not supported */
if (strcmp(m->desc, "eeprom") == 0)
return 0; /* nothing to do */
avrdude_message(MSG_INFO, "%s: butterfly_page_erase() called on memory type \"%s\"\n",
progname, m->desc);
return -1;
}
static int butterfly_read_byte(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
unsigned long addr, unsigned char * value)
{
char cmd;
if (strcmp(m->desc, "flash") == 0) {
return butterfly_read_byte_flash(pgm, p, m, addr, value);
}
if (strcmp(m->desc, "eeprom") == 0) {
return butterfly_read_byte_eeprom(pgm, p, m, addr, value);
}
if (strcmp(m->desc, "lfuse") == 0) {
cmd = 'F';
}
else if (strcmp(m->desc, "hfuse") == 0) {
cmd = 'N';
}
else if (strcmp(m->desc, "efuse") == 0) {
cmd = 'Q';
}
else if (strcmp(m->desc, "lock") == 0) {
cmd = 'r';
}
else
return -1;
butterfly_send(pgm, &cmd, 1);
butterfly_recv(pgm, (char *)value, 1);
return *value == '?'? -1: 0;
}
static int butterfly_paged_write(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
unsigned int page_size,
unsigned int addr, unsigned int n_bytes)
{
unsigned int max_addr = addr + n_bytes;
char *cmd;
unsigned int blocksize = PDATA(pgm)->buffersize;
int use_ext_addr = m->op[AVR_OP_LOAD_EXT_ADDR] != NULL;
unsigned int wr_size = 2;
if (strcmp(m->desc, "flash") && strcmp(m->desc, "eeprom"))
return -2;
if (m->desc[0] == 'e')
wr_size = blocksize = 1; /* Write to eeprom single bytes only */
if (use_ext_addr) {
butterfly_set_extaddr(pgm, addr / wr_size);
} else {
butterfly_set_addr(pgm, addr / wr_size);
}
#if 0
usleep(1000000);
butterfly_send(pgm, "y", 1);
if (butterfly_vfy_cmd_sent(pgm, "clear LED") < 0)
return -1;
#endif
cmd = malloc(4+blocksize);
if (!cmd) return -1;
cmd[0] = 'B';
cmd[3] = toupper((int)(m->desc[0]));
while (addr < max_addr) {
if ((max_addr - addr) < blocksize) {
blocksize = max_addr - addr;
};
memcpy(&cmd[4], &m->buf[addr], blocksize);
cmd[1] = (blocksize >> 8) & 0xff;
cmd[2] = blocksize & 0xff;
butterfly_send(pgm, cmd, 4+blocksize);
if (butterfly_vfy_cmd_sent(pgm, "write block") < 0)
return -1;
addr += blocksize;
} /* while */
free(cmd);
return addr;
}
static int butterfly_paged_load(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
unsigned int page_size,
unsigned int addr, unsigned int n_bytes)
{
unsigned int max_addr = addr + n_bytes;
int rd_size = 2;
int blocksize = PDATA(pgm)->buffersize;
int use_ext_addr = m->op[AVR_OP_LOAD_EXT_ADDR] != NULL;
/* check parameter syntax: only "flash" or "eeprom" is allowed */
if (strcmp(m->desc, "flash") && strcmp(m->desc, "eeprom"))
return -2;
if (m->desc[0] == 'e')
rd_size = blocksize = 1; /* Read from eeprom single bytes only */
{ /* use buffered mode */
char cmd[4];
cmd[0] = 'g';
cmd[3] = toupper((int)(m->desc[0]));
if (use_ext_addr) {
butterfly_set_extaddr(pgm, addr / rd_size);
} else {
butterfly_set_addr(pgm, addr / rd_size);
}
while (addr < max_addr) {
if ((max_addr - addr) < blocksize) {
blocksize = max_addr - addr;
};
cmd[1] = (blocksize >> 8) & 0xff;
cmd[2] = blocksize & 0xff;
butterfly_send(pgm, cmd, 4);
butterfly_recv(pgm, (char *)&m->buf[addr], blocksize);
addr += blocksize;
} /* while */
}
return addr * rd_size;
}
/* Signature byte reads are always 3 bytes. */
static int butterfly_read_sig_bytes(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m)
{
unsigned char tmp;
if (m->size < 3) {
avrdude_message(MSG_INFO, "%s: memsize too small for sig byte read", progname);
return -1;
}
butterfly_send(pgm, "s", 1);
butterfly_recv(pgm, (char *)m->buf, 3);
/* Returned signature has wrong order. */
tmp = m->buf[2];
m->buf[2] = m->buf[0];
m->buf[0] = tmp;
return 3;
}
const char butterfly_desc[] = "Atmel Butterfly evaluation board; Atmel AppNotes AVR109, AVR911";
void butterfly_initpgm(PROGRAMMER * pgm)
{
strcpy(pgm->type, "butterfly");
/*
* mandatory functions
*/
pgm->rdy_led = butterfly_rdy_led;
pgm->err_led = butterfly_err_led;
pgm->pgm_led = butterfly_pgm_led;
pgm->vfy_led = butterfly_vfy_led;
pgm->initialize = butterfly_initialize;
pgm->display = butterfly_display;
pgm->enable = butterfly_enable;
pgm->disable = butterfly_disable;
pgm->powerup = butterfly_powerup;
pgm->powerdown = butterfly_powerdown;
pgm->program_enable = butterfly_program_enable;
pgm->chip_erase = butterfly_chip_erase;
pgm->open = butterfly_open;
pgm->close = butterfly_close;
pgm->read_byte = butterfly_read_byte;
pgm->write_byte = butterfly_write_byte;
/*
* optional functions
*/
pgm->page_erase = butterfly_page_erase;
pgm->paged_write = butterfly_paged_write;
pgm->paged_load = butterfly_paged_load;
pgm->read_sig_bytes = butterfly_read_sig_bytes;
pgm->setup = butterfly_setup;
pgm->teardown = butterfly_teardown;
pgm->flag = 0;
}
const char butterfly_mk_desc[] = "Mikrokopter.de Butterfly";
void butterfly_mk_initpgm(PROGRAMMER * pgm)
{
butterfly_initpgm(pgm);
strcpy(pgm->type, "butterfly_mk");
pgm->flag = IS_BUTTERFLY_MK;
}
|