#!/usr/bin/perl
#-----------------------------------------------------------------------------
# Allows you to get one unique output log file, sorted on date,
# built from particular sources.
# This tool is part of AWStats log analyzer but can be use
# alone for any other log analyzer.
# See COPYING.TXT file about AWStats GNU General Public License.
#-----------------------------------------------------------------------------

use strict; no strict "refs";
#use diagnostics;
use POSIX qw( strftime );


#-----------------------------------------------------------------------------
# Defines
#-----------------------------------------------------------------------------

# ENABLETHREAD --> COMMENT THIS BLOCK TO USE A THREADED VERSION
my $UseThread=0;
&Check_Thread_Use();
my $NbOfDNSLookupAsked = 0;
my %threadarray = ();
my %MyDNSTable = ();
my %TmpDNSLookup = ();

# ENABLETHREAD --> UNCOMMENT THIS BLOCK TO USE A THREADED VERSION
#my $UseThread=1;
#&Check_Thread_Use();
#my $NbOfDNSLookupAsked : shared = 0;
#my %threadarray : shared = ();
#my %MyDNSTable : shared = ();
#my %TmpDNSLookup : shared = ();


# ---------- Init variables --------
use vars qw/ $REVISION $VERSION /;
$REVISION = '20140126';
$VERSION="1.2 (build $REVISION)";

use vars qw/ $NBOFLINESFORBENCHMARK /;
$NBOFLINESFORBENCHMARK=8192;

use vars qw/
$DIR $PROG $Extension
$Debug $ShowSteps $AddFileNum $AddFileName $LastLogNum $PrintFields
$MaxNbOfThread $DNSLookup $DNSCache $DirCgi $DirData $DNSLookupAlreadyDone
$NbOfLinesShowsteps $AFINET $QueueCursor $StopOnFirstEof $IgnoreMissing
/;
$DIR='';
$PROG='';
$Extension='';
$Debug=0;
$ShowSteps=0;
$AddFileNum=0;
$AddFileName=0;
$LastLogNum=0;
$PrintFields=0;
$MaxNbOfThread=0;
$DNSLookup=0;
$DNSCache='';
$DirCgi='';
$DirData='';
$DNSLookupAlreadyDone=0;
$NbOfLinesShowsteps=0;
$AFINET='';
$StopOnFirstEof=0;
$IgnoreMissing=0;

# ---------- Init arrays --------
use vars qw/
@SkipDNSLookupFor
@ParamFile
@Fields
/;
# ---------- Init hash arrays --------
use vars qw/
%LogFileToDo %linerecord %timerecord %corrupted
%QueueHostsToResolve %QueueRecords
/;
%LogFileToDo = %linerecord = %timerecord = %corrupted = ();
%QueueHostsToResolve = %QueueRecords = ();

# DRA2: the order of timerecords are kept here, each index in the array is the filerecordnumber, which
# DRA2: is used as the key for the other hashes
use vars qw/
@timerecordorder
/;
@timerecordorder = ();

# ---------- External Program variables ----------
# For gzip compression
my $zcat = 'gzip -cd';
my $zcat_file = '\.gz$';
# For bz2 compression
my $bzcat = 'bzip2 -cd';
my $bzcat_file = '\.bz2$';
# For xz compression
my $xzcat = 'xz -cd';
my $xzcat_file = '\.xz$';


#-----------------------------------------------------------------------------
# Functions
#-----------------------------------------------------------------------------

#------------------------------------------------------------------------------
# Function:		Add all files of a specific directory
# Parameters:	$message
# Input:		Directory path
# Output:		None
# Return:		Array with list of files
#------------------------------------------------------------------------------
sub addDirectory {
    my ($dir,@list) = @_;
    my $dirH;
    opendir($dirH, $dir) || die ("Can't open '$dir'");
    while ($_ = readdir($dirH) ) {
		if (-f "$dir/$_") {
		    push @list, "$dir/$_";
		}
    }
    closedir($dirH);
    return @list;
}

#------------------------------------------------------------------------------
# Function:		Write an error message and exit
# Parameters:	$message
# Input:		None
# Output:		None
# Return:		None
#------------------------------------------------------------------------------
sub error {
	print STDERR "Error: $_[0].\n";
    exit 1;
}

#------------------------------------------------------------------------------
# Function:		Write a debug message
# Parameters:	$message
# Input:		$Debug
# Output:		None
# Return:		None
#------------------------------------------------------------------------------
sub debug {
	my $level = $_[1] || 1;
	if ($Debug >= $level) { 
		my $debugstring = $_[0];
		print "DEBUG $level - ".localtime(time())." : $debugstring\n";
	}
}

#------------------------------------------------------------------------------
# Function:		Write a warning message
# Parameters:	$message
# Input:		$Debug
# Output:		None
# Return:		None
#------------------------------------------------------------------------------
sub warning {
	my $messagestring=shift;
	if ($Debug) { debug("$messagestring",1); }
   	print STDERR "$messagestring\n";
}

#-----------------------------------------------------------------------------
# Function:     Return 1 if string contains only ascii chars
# Input:        String
# Return:       0 or 1
#-----------------------------------------------------------------------------
sub IsAscii {
	my $string=shift;
	if ($Debug) { debug("IsAscii($string)",5); }
	if ($string =~ /^[\w\+\-\/\\\.%,;:=\"\'&?!\s]+$/) {
		if ($Debug) { debug(" Yes",5); }
		return 1;		# Only alphanum chars (and _) or + - / \ . % , ; : = " ' & ? space \t
	}
	if ($Debug) { debug(" No",5); }
	return 0;
}

#-----------------------------------------------------------------------------
# DRA Function:     Return 1 if DNS lookup should be skipped
# Input:        String
# Return:       0 or 1
#-----------------------------------------------------------------------------
sub SkipDNSLookup {
	foreach my $match (@SkipDNSLookupFor) { if ($_[0] =~ /$match/i) { return 1; } }
	0; # Not in @SkipDNSLookupFor
}

#-----------------------------------------------------------------------------
# Function:     Function that wait for DNS lookup (can be threaded)
# Input:        String
# Return:       0 or 1
#-----------------------------------------------------------------------------
sub MakeDNSLookup {
	my $ipaddress=shift;
 	$NbOfDNSLookupAsked++;
	use Socket; $AFINET=AF_INET;
	my $tid=0;
	$tid=$MaxNbOfThread?eval("threads->self->tid()"):0;
	if ($Debug) { debug("  ***** Thread id $tid: MakeDNSlookup started (for $ipaddress)",4); }
	my $lookupresult=gethostbyaddr(pack("C4",split(/\./,$ipaddress)),$AFINET);	# This is very slow, may took 20 seconds
	if (! $lookupresult || $lookupresult =~ /^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$/ || ! IsAscii($lookupresult)) {
		$TmpDNSLookup{$ipaddress}='*';
	}
	else {
		$TmpDNSLookup{$ipaddress}=$lookupresult;
	}
	if ($Debug) { debug("  ***** Thread id $tid: MakeDNSlookup done ($ipaddress resolved into $TmpDNSLookup{$ipaddress})",4); }
	delete $threadarray{$ipaddress};
	return;
}

#-----------------------------------------------------------------------------
# Function:     WriteRecordsReadyInQueue
# Input:        -
# Return:       0
#-----------------------------------------------------------------------------
sub WriteRecordsReadyInQueue {
	my $logfilechosen=shift;
	if ($Debug) { debug("Check head of queue to write records ready to flush (QueueCursor=$QueueCursor, QueueSize=".(scalar keys %QueueRecords).")",4); }
	while ( $QueueHostsToResolve{$QueueCursor} && ( ($QueueHostsToResolve{$QueueCursor} eq '*') || ($MyDNSTable{$QueueHostsToResolve{$QueueCursor}}) || ($TmpDNSLookup{$QueueHostsToResolve{$QueueCursor}}) ) ) {
		# $QueueCursor point to a ready record
		if ($QueueHostsToResolve{$QueueCursor} eq '*') {
			if ($Debug) { debug(" First elem in queue is ready. No change on it. We pull it.",4); }
		}
		else {
			if ($MyDNSTable{$QueueHostsToResolve{$QueueCursor}}) {
				if ($MyDNSTable{$QueueHostsToResolve{$QueueCursor}} ne '*') {
					$QueueRecords{$QueueCursor}=~s/$QueueHostsToResolve{$QueueCursor}/$MyDNSTable{$QueueHostsToResolve{$QueueCursor}}/;
					if ($Debug) { debug(" First elem in queue has been resolved (found in MyDNSTable $MyDNSTable{$QueueHostsToResolve{$QueueCursor}}). We pull it.",4); }
				}
			}
			elsif ($TmpDNSLookup{$QueueHostsToResolve{$QueueCursor}}) {
				if ($TmpDNSLookup{$QueueHostsToResolve{$QueueCursor}} ne '*') {
					$QueueRecords{$QueueCursor}=~s/$QueueHostsToResolve{$QueueCursor}/$TmpDNSLookup{$QueueHostsToResolve{$QueueCursor}}/;
					if ($Debug) { debug(" First elem in queue has been resolved (found in TmpDNSLookup $TmpDNSLookup{$QueueHostsToResolve{$QueueCursor}}). We pull it.",4); }
				}
			}
		}
		# Record is ready, we output it.
		if ($AddFileNum)  { print "$logfilechosen "; }
		if ($AddFileName) { print "$LogFileToDo{$logfilechosen} "; }
		# see if we need to dump fields
		if ($PrintFields && $LastLogNum != $logfilechosen){
			print($Fields[$logfilechosen]."\n");
			$LastLogNum = $logfilechosen;
		}
		print "$QueueRecords{$QueueCursor}\n";
		delete $QueueRecords{$QueueCursor};
		delete $QueueHostsToResolve{$QueueCursor};
		$QueueCursor++;
	}
	return 0;
}

#-----------------------------------------------------------------------------
# Function:     Check if thread are enabled or not
# Input:        -
# Return:       -
#-----------------------------------------------------------------------------
sub Check_Thread_Use {
	if ($] >= 5.008) {	for (0..@ARGV-1) { if ($ARGV[$_] =~ /^-dnslookup[:=](\d{1,2})/i) {
		if ($UseThread) {
			if (!eval ('require "threads.pm";')) { &error("Failed to load perl module 'threads' required for multi-threaded DNS lookup".($@?": $@":"")); }
			if (!eval ('require "threads/shared.pm";')) { &error("Failed to load perl module 'threads::shared' required for multi-threaded DNS lookup".($@?": $@":"")); }
		}
		else { &error("Multi-thread is disabled in default version of this script.\nYou must manually edit the file '$0' to comment/uncomment all\nlines marked with 'ENABLETHREAD' string to enable multi-threading"); }
		} }
	}
}


#-----------------------------------------------------------------------------
# MAIN
#-----------------------------------------------------------------------------
($DIR=$0) =~ s/([^\/\\]*)$//; ($PROG=$1) =~ s/\.([^\.]*)$//; $Extension=$1;

# Get parameters (Note: $MaxNbOfThread is already known
my $cpt=1;
for (0..@ARGV-1) {
	if ($ARGV[$_] =~ /^-/) {
		if ($ARGV[$_] =~ /debug=(\d)/i) { $Debug=$1; }
		elsif ($ARGV[$_] =~ /dnscache=/i) { $DNSLookup||=2; $DNSCache=$ARGV[$_]; $DNSCache =~ s/-dnscache=//; }
		elsif ($ARGV[$_] =~ /dnslookup[:=](\d{1,2})/i) { $DNSLookup||=1; $MaxNbOfThread=$1; }
		elsif ($ARGV[$_] =~ /dnslookup/i) { $DNSLookup||=1; }
		elsif ($ARGV[$_] =~ /showsteps/i) { $ShowSteps=1; }
		elsif ($ARGV[$_] =~ /addfilenum/i) { $AddFileNum=1; }
		elsif ($ARGV[$_] =~ /addfilename/i) { $AddFileName=1; }
		elsif ($ARGV[$_] =~ /stoponfirsteof/i) { $StopOnFirstEof=1; }
		elsif ($ARGV[$_] =~ /printfields/i) { $PrintFields=1; }
		elsif ($ARGV[$_] =~ /ignoremissing/i) { $IgnoreMissing=1; }
		else { print "Unknown argument $ARGV[$_] ignored\n"; }
	}
	elsif ($ARGV[$_] =~ /addfolder=(.*)$/i) {
   		@ParamFile = addDirectory($1, @ParamFile);
	}
	else {
		push @ParamFile, $ARGV[$_];
		$cpt++;
	}
}
if ($Debug) { $|=1; }

if ($Debug) {
	debug(ucfirst($PROG)." - $VERSION - Perl $^X $]",1);
	debug("DNSLookup=$DNSLookup");
	debug("DNSCache=$DNSCache");
	debug("MaxNbOfThread=$MaxNbOfThread");
}

# Disallow MaxNbOfThread and Perl < 5.8
if ($] < 5.008 && $MaxNbOfThread) {
	error("Multi-threaded DNS lookup is only supported with Perl 5.8 or higher (not $]). Use -dnslookup option instead");
}

# Warning, there is a memory hole in ActiveState perl version (in delete functions)
if ($^X =~ /activestate/i || $^X =~ /activeperl/i) {
	# TODO Add a warning

}

if (scalar @ParamFile == 0) {
	print "----- $PROG $VERSION (c) Laurent Destailleur -----\n";
	print "$PROG allows you to get one unique output log file, sorted on date,\n";
	print "built from particular sources:\n";
	print " - It can read several input log files,\n";
	print " - It can read .gz/.bz2/.xz log files,\n";
	print " - It can also makes a fast reverse DNS lookup to replace\n";
	print "   all IP addresses into host names in resulting log file.\n";
	print "$PROG comes with ABSOLUTELY NO WARRANTY. It's a free software\n";
	print "distributed with a GNU General Public License (See COPYING.txt file).\n";
	print "$PROG is part of AWStats but can be used alone as a log merger\n";
	print "or resolver before using any other log analyzer.\n";
	print "\n";
	print "Usage:\n";
	print "  $PROG.$Extension [options] file\n";
	print "  $PROG.$Extension [options] file1 ... filen\n";
	print "  $PROG.$Extension [options] *.*\n";
	print "  $PROG.$Extension [options] addfolder=dirname\n";
	print "  perl $PROG.$Extension [options] *.* > newfile\n";
	print "Options:\n";
	print "  -dnslookup      make a reverse DNS lookup on IP adresses\n";
	print "  -dnslookup=n    same with a n parallel threads instead of serial requests\n";
	print "  -dnscache=file  make DNS lookup from cache file first before network lookup\n";
	print "  -showsteps      print on stderr benchmark information every $NBOFLINESFORBENCHMARK lines\n";
	print "  -addfilenum     if used with several files, file number can be added in first\n";
	print "  -addfilename    if used with several files, file name can be added in first\n";
	print "                  field of output file. This can be used to add a cluster id\n";
	print "                  when log files come from several load balanced computers.\n";
	print "  -stoponfirsteof Stop processing when any logfile reaches end-of-file.\n";
	print "  -printfields    For IIS or W3C logs, prints the latest field header for\n";
	print "                  the currentlog file when switching between log file entries\n";
	print "                  so that the parsercan automatically determine which fields\n";
	print "                  are avaiable.\n";
	print "  -ignoremissing  will not fail if a log file is missing\n";
	print "\n";
	
	print "This runs $PROG in command line to open one or several\n";
	print "server log files to merge them (sorted on date) and/or to make a reverse\n";
	print "DNS lookup (if asked). The result log file is sent on standard output.\n";
	print "Note: $PROG is not a 'sort' tool to sort one file. It's a\n";
	print "software able to output sorted log records (with a reverse DNS lookup\n";
	print "included or not) even if log records are dispatched in several files.\n";
	print "Each of thoose files must be already independently sorted itself\n";
	print "(but that is the case in all web server log files). So you can use it\n";
	print "for load balanced log files or to group several old log files.\n";
	print "\n";
	print "Don't forget that the main goal of logresolvemerge is to send log records to\n";
	print "a log analyzer in a sorted order without merging files on disk (NO NEED\n";
	print "OF DISK SPACE AT ALL) and without loading files into memory (NO NEED\n";
	print "OF MORE MEMORY). Choose of output records is done on the fly.\n";
	print "\n";
	print "So logresolvemerge is particularly useful when you want to output several\n";
	print "and/or large log files in a fast process, with no use of disk or\n";
	print "more memory, and in a chronological order through a pipe (to be used by a log\n";
	print "analyzer).\n";
	print "\n";
	print "Note: If input records are not 'exactly' sorted but 'nearly' sorted (this\n";
	print "occurs with heavy servers), this is not a problem, the output will also\n";
	print "be 'nearly' sorted but a few log analyzers (like AWStats) knowns how to deal\n";
	print "with such logs.\n";
	print "\n";
	print "WARNING: If log files are old MAC text files (lines ended with CR char), you\n";
	print "can't run this tool on Win or Unix platforms.\n";
	print "\n";
	print "WARNING: Because of memory holes in ActiveState Perl version, use another\n";
	print "Perl interpreter if you need to process large log files.\n";
	print "\n";
	print "Now supports/detects:\n";
	print "  Automatic detection of log format\n";
	print "  Files can be .gz/.bz2/.xz files if gzip/bzip2/xz tools are available in PATH.\n";
	print "  Multithreaded reverse DNS lookup (several parallel requests) with Perl 5.8+.\n";
	print "New versions and FAQ at http://www.awstats.org\n";
	exit 0;
}

# Get current time
my $nowtime=time;
my ($nowsec,$nowmin,$nowhour,$nowday,$nowmonth,$nowyear) = localtime($nowtime);
if ($nowyear < 100) { $nowyear+=2000; } else { $nowyear+=1900; }
my $nowsmallyear=$nowyear;$nowsmallyear =~ s/^..//;
if (++$nowmonth < 10) { $nowmonth = "0$nowmonth"; }
if ($nowday < 10) { $nowday = "0$nowday"; }
if ($nowhour < 10) { $nowhour = "0$nowhour"; }
if ($nowmin < 10) { $nowmin = "0$nowmin"; }
if ($nowsec < 10) { $nowsec = "0$nowsec"; }
# Get tomorrow time (will be used to discard some record with corrupted date (future date))
my ($tomorrowsec,$tomorrowmin,$tomorrowhour,$tomorrowday,$tomorrowmonth,$tomorrowyear) = localtime($nowtime+86400);
if ($tomorrowyear < 100) { $tomorrowyear+=2000; } else { $tomorrowyear+=1900; }
my $tomorrowsmallyear=$tomorrowyear;$tomorrowsmallyear =~ s/^..//;
if (++$tomorrowmonth < 10) { $tomorrowmonth = "0$tomorrowmonth"; }
if ($tomorrowday < 10) { $tomorrowday = "0$tomorrowday"; }
if ($tomorrowhour < 10) { $tomorrowhour = "0$tomorrowhour"; }
if ($tomorrowmin < 10) { $tomorrowmin = "0$tomorrowmin"; }
if ($tomorrowsec < 10) { $tomorrowsec = "0$tomorrowsec"; }
my $timetomorrow=$tomorrowyear.$tomorrowmonth.$tomorrowday.$tomorrowhour.$tomorrowmin.$tomorrowsec;	

# Init other parameters
$NBOFLINESFORBENCHMARK--;
if ($ENV{"GATEWAY_INTERFACE"}) { $DirCgi=''; }
if ($DirCgi && !($DirCgi =~ /\/$/) && !($DirCgi =~ /\\$/)) { $DirCgi .= '/'; }
if (! $DirData || $DirData eq '.') { $DirData=$DIR; }	# If not defined or chosen as "." value then DirData is current dir
if (! $DirData)  { $DirData='.'; }						# If current dir not defined then we put it to "."
$DirData =~ s/\/$//;

#my %monthlib =  ( "01","$Message[60]","02","$Message[61]","03","$Message[62]","04","$Message[63]","05","$Message[64]","06","$Message[65]","07","$Message[66]","08","$Message[67]","09","$Message[68]","10","$Message[69]","11","$Message[70]","12","$Message[71]" );
# monthnum must be in english because it's used to translate log date in apache log files which are always in english
my %monthnum =  ( "Jan","01","jan","01","Feb","02","feb","02","Mar","03","mar","03","Apr","04","apr","04","May","05","may","05","Jun","06","jun","06","Jul","07","jul","07","Aug","08","aug","08","Sep","09","sep","09","Oct","10","oct","10","Nov","11","nov","11","Dec","12","dec","12" );

if ($DNSCache) {
	if ($Debug) { debug("Load DNS Cache file $DNSCache",2); }
	open(CACHE, "<$DNSCache") or error("Can't open cache file $DNSCache");
	while (<CACHE>) {
		my ($time, $ip, $name) = split;
        if ($ip && $name) {
            $name="$ip" if $name eq '*';
    		$MyDNSTable{$ip}=$name;
        }
	}
	close CACHE;
}

#-----------------------------------------------------------------------------
# PROCESSING CURRENT LOG(s)
#-----------------------------------------------------------------------------
my $NbOfLinesRead=0;
my $NbOfLinesParsed=0;
my $logfilechosen=0;
my $starttime=time();

# Define the LogFileToDo list
$cpt=1;
foreach my $key (0..(@ParamFile-1)) {
	if (($ParamFile[$key] !~ /\*/ && $ParamFile[$key] !~ /\?/) || $ParamFile[$key] =~ /\|$/) {

		if ($Debug) { debug("DBG1 Log file $ParamFile[$key] is added to LogFileToDo with number $cpt."); }
		# Check for supported compression 
		if ($ParamFile[$key] =~ /$zcat_file/) {
			if ($Debug) { debug("GZIP compression detected for Log file $ParamFile[$key]."); }
			# Modify the name to include the zcat command
			$ParamFile[$key] = $zcat . ' ' . $ParamFile[$key] . ' |';
		}
		elsif ($ParamFile[$key] =~ /$bzcat_file/) {
			if ($Debug) { debug("BZ2 compression detected for Log file $ParamFile[$key]."); }
			# Modify the name to include the bzcat command
			$ParamFile[$key] = $bzcat . ' ' . $ParamFile[$key] . ' |';
		}
		elsif ($ParamFile[$key] =~ /$xzcat_file/) {
			if ($Debug) { debug("XZ compression detected for Log file $ParamFile[$key]."); }
			# Modify the name to include the xzcat command
			$ParamFile[$key] = $xzcat . ' ' . $ParamFile[$key] . ' |';
		}

		$LogFileToDo{$cpt}=@ParamFile[$key];
		$cpt++;
		
	}
    else {
        my $DirFile=$ParamFile[$key]; $DirFile =~ s/([^\/\\]*)$//;
        $ParamFile[$key] = $1;
        if ($DirFile eq '') { $DirFile = '.'; }
        $ParamFile[$key] =~ s/\./\\\./g;
        $ParamFile[$key] =~ s/\*/\.\*/g;
        $ParamFile[$key] =~ s/\?/\./g;
        if ($Debug) { debug("Search for file \"$ParamFile[$key]\" into \"$DirFile\""); }
        opendir(DIR,"$DirFile");
        my @filearray = sort readdir DIR;
        close DIR;
        foreach my $i (0..$#filearray) {
            if ("$filearray[$i]" =~ /^$ParamFile[$key]$/ && "$filearray[$i]" ne "." && "$filearray[$i]" ne "..") {

                if ($Debug) { debug("DBG2 Log file $filearray[$i] is added to LogFileToDo with number $cpt."); }
                # Check for supported compression
                if ($filearray[$i] =~ /$zcat_file/) {
                    if ($Debug) { debug("GZIP compression detected for Log file $filearray[$i]."); }
                    # Modify the name to include the zcat command
                    $LogFileToDo{$cpt}=$zcat . ' ' . "$DirFile/$filearray[$i]" . ' |';
                }
                elsif ($filearray[$i] =~ /$bzcat_file/) {
                    if ($Debug) { debug("BZ2 compression detected for Log file $filearray[$i]."); }
                    # Modify the name to include the bzcat command
                    $LogFileToDo{$cpt}=$bzcat . ' ' . "$DirFile/$filearray[$i]" . ' |';
                }
                elsif ($filearray[$i] =~ /$xzcat_file/) {
                    if ($Debug) { debug("XZ compression detected for Log file $filearray[$i]."); }
                    # Modify the name to include the xzcat command
                    $LogFileToDo{$cpt}=$xzcat . ' ' . "$DirFile/$filearray[$i]" . ' |';
                }
                else {
                    $LogFileToDo{$cpt}="$DirFile/$filearray[$i]";
                }
                $cpt++;
                
            }
        }
    }
}

# If no files to process
if (scalar keys %LogFileToDo == 0) {
	error("No input log file found");
}

# Open all log files
if ($Debug) { debug("Start of processing ".(scalar keys %LogFileToDo)." log file(s), $MaxNbOfThread threads max"); }
foreach my $logfilenb (keys %LogFileToDo) {
	if ($Debug) { debug("Open log file number $logfilenb: \"$LogFileToDo{$logfilenb}\""); }
	if ($IgnoreMissing){
		if (!open("LOG$logfilenb","$LogFileToDo{$logfilenb}")){
			debug("Couldn't open log file \"$LogFileToDo{$logfilenb}\" : $!");
			delete $LogFileToDo{$logfilenb};
		}
	}else{
		open("LOG$logfilenb","$LogFileToDo{$logfilenb}") || error("Couldn't open log file \"$LogFileToDo{$logfilenb}\" : $!");
	}
	binmode "LOG$logfilenb";	# To avoid pb of corrupted text log files with binary chars.
}

$QueueCursor=1;
STOPONFIRSTEOF: while (1 == 1)
{
	# BEGIN Read new record
	# For each log file if logfilechosen is 0
	# If not, we go directly to log file instead of iterating over all keys for a match
	#----------------------------------------------------------------------------------
    my @readlist;
	if($logfilechosen == 0) {
	    @readlist = keys %LogFileToDo;
	} else {
	    @readlist = ($logfilechosen);
	}
	foreach my $logfilenb (@readlist)
	{
		if ($Debug) { debug("Search next record in file number $logfilenb",3); }
		# Read chosen log file until we found a record with good date or reaching end of file
		while (1 == 1) {
			my $LOG="LOG$logfilenb";
			$_=<$LOG>;	# Read new line
			if (! $_) 
			{							# No more records in log file number $logfilenb
				if ($Debug) { debug(" No more records in file number $logfilenb",2); }
				delete $LogFileToDo{$logfilenb};
				if ($StopOnFirstEof) 
				{
					if ($Debug) { debug("Exiting loop due to EOF of logfile $logfilenb",1); }
					last STOPONFIRSTEOF;
				}
				last;
			}
		
			# Get the latest Fields header for printing IIS and W3C logs
			if ($PrintFields && $_ =~ m/#Fields:/){
				my $field = $_;
				# strip whitespace
				$field =~ s/^\s+|\s+$//g;
				if (!$Fields[$logfilenb] || $field != $Fields[$logfilenb]){
					$Fields[$logfilenb] = $field;
					debug("Found new fields in $logfilenb: $Fields[$logfilenb]");
				}
			}
			
			$NbOfLinesRead++;
			chomp $_; s/\r$//;

			if (/^#/) { next; }									# Ignore comment lines (ISS writes such comments)
			if (/^!!/) { next; }								# Ignore comment lines (Webstar writes such comments)
			if (/^$/) { next; }									# Ignore blank lines (With ISS: happens sometimes, with Apache: possible when editing log file)

			$linerecord{$logfilenb}=$_; 

			# Check filters
			#----------------------------------------------------------------------

			# Split YYYY-MM-DD HH:MM:SS
			#    or DD/Month/YYYY:HH:MM:SS
			#    or MM/DD/YY\tHH:MM:SS
			#    or 9999.999
 			#    or Month DD HH:MM:SS
			my $year=0; my $month=0; my $day=0; my $hour=0; my $minute=0; my $second=0;
			if ($_ =~ /(\d\d\d\d)-(\d\d)-(\d\d)\s(\d\d):(\d\d):(\d\d)/) { $year=$1; $month=$2; $day=$3; $hour=$4; $minute=$5; $second=$6; }
			elsif ($_ =~ /\[(\d?\d)[\/:\s](\w+)[\/:\s](\d\d\d\d)[\/:\s](\d\d)[\/:\s](\d\d)[\/:\s](\d\d) /) { $year=$3; $month=$2; $day=$1; $hour=$4; $minute=$5; $second=$6; }
			elsif ($_ =~ /\w+ (\w+) {1,2}(\d?\d) (\d\d)[\/:\s](\d\d)[\/:\s](\d\d) (\d\d\d\d)/) { $year=$6; $month=$1; $day=$2; $hour=$3; $minute=$4; $second=$5; }
			elsif ($_ =~ /^(\d\d\d\d+\.\d\d\d) /)
			{
				my $timetime = strftime('%Y-%m-%d-%T', gmtime($1));
				$timetime =~ /(\d\d\d\d)-(\d\d)-(\d\d)-(\d\d):(\d\d):(\d\d)/;
				$year=$1; $month=$2; $day=$3; $hour=$4; $minute=$5; $second=$6;
			}
 			elsif ($_ =~ /(\w+)\s\s?(\d?\d) (\d\d):(\d\d):(\d\d) /) {	# Month DD HH:MM:SS
 				$month=$1; $day=$2; $hour=$3; $minute=$4; $second=$5;
 				if (($monthnum{$month}>$monthnum{$nowmonth}) || ($monthnum{$month}==$monthnum{$nowmonth} &&  $day>$nowday)) {
 					$year=$nowyear-1;
 				}
                else { $year=$nowyear; }
 			}
			if (length $day == 1) { $day = "0".$day; }

			if ($monthnum{$month}) { $month=$monthnum{$month}; }	# Change lib month in num month if necessary

			# Create $timerecord like YYYYMMDDHHMMSS
	 		$timerecord{$logfilenb}=int("$year$month$day$hour$minute$second");
			if ($timerecord{$logfilenb}<10000000000000) {
				if ($Debug) { debug(" This record is corrupted (no date found)",3); }
				$corrupted{$logfilenb}++;
				next;
			}
			if ($Debug) { debug(" This is next record for file $logfilenb : timerecord=$timerecord{$logfilenb}",3); }
			
			# Sort and insert into timerecordorder, oldest at end/back of array
			# At the beginning, timerecordorder is empty. Then beceause the first pass is
			# a loop on each file to read each first line, the timerecordorder size is
			# number of input files.
			# After, each new loop, read only one new line, so timerecordorder size increase
			# by one but decrease just after by the pop command later.
			my $inserted=0;
			for(my $c=$#timerecordorder; $c>=0 ; $c--) {
			    if($timerecord{$logfilenb} <= $timerecord{$timerecordorder[$c]})
			    {
    				# Is older or equal than index at $c, add after
				    $timerecordorder[$c + 1]=$logfilenb;
				    $inserted = 1;
				    last;
			    } else {
				    $timerecordorder[$c + 1]=$timerecordorder[$c];
			    }
			}
			if(! $inserted) {
			    $timerecordorder[0] = $logfilenb;
			}

			last;
		}
	}
	# END Read new lines for each log file. After this, following var are filled
	# $timerecord{$logfilenb}
	# @timerecordorder array

	# We choose which record of which log file to process
	if ($Debug) { debug("Choose which record of which log file to process",3); }
	$logfilechosen=pop(@timerecordorder);
	if(!defined($logfilechosen)) { last; }              # No more record to process 
	
	# Record is chosen
	if ($Debug) { debug(" We chose to qualify record of file number $logfilechosen",3); }
	if ($Debug) { debug("  Record is $linerecord{$logfilechosen}",3); }
			
	# Record is approved. We found a new line to parse in file number $logfilechosen
	#-------------------------------------------------------------------------------
	$NbOfLinesParsed++;
	if ($ShowSteps) {
		if ((++$NbOfLinesShowsteps & $NBOFLINESFORBENCHMARK) == 0) {
			my $delay=(time()-$starttime)||1;
			print STDERR "$NbOfLinesParsed lines processed (".(1000*$delay)." ms, ".int($NbOfLinesShowsteps/$delay)." lines/seconds)\n";
		}
	}

	# Do DNS lookup
	#--------------------
	my $Host='';
	my $ip=0;
	if ($DNSLookup) {			# DNS lookup is 1 or 2
		if ($linerecord{$logfilechosen} =~ /(\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3})/) { $ip=4; $Host=$1; }	# IPv4
		elsif ($linerecord{$logfilechosen} =~ /([0-9A-F]*:)/i) { $ip=6; $Host=$1; }						# IPv6
		if ($ip) {
			# Check in static DNS cache file
			if ($MyDNSTable{$Host}) {
				if ($Debug) { debug("  DNS lookup asked for $Host and found in static DNS cache file: $MyDNSTable{$Host}",4); }
			}
			elsif ($DNSLookup==1) {
				# Check in session cache (dynamic DNS cache file + session DNS cache)
				if (! $threadarray{$Host} && ! $TmpDNSLookup{$Host}) {
					if (@SkipDNSLookupFor && &SkipDNSLookup($Host)) {
						$TmpDNSLookup{$Host}='*';
						if ($Debug) { debug("  No need of reverse DNS lookup for $Host, skipped at user request.",4); }
					}
					else {
						if ($ip == 4) {
							# Create or not a new thread
							if ($MaxNbOfThread) {
								if (! $threadarray{$Host}) {	# No thread already launched for $Host
									while ((scalar keys %threadarray) >= $MaxNbOfThread) {
										if ($Debug) { debug(" $MaxNbOfThread thread running reached, so we wait",4); }
										sleep 1;
									}
									$threadarray{$Host}=1;		# Semaphore to tell thread for $Host is active
#									my $t = new Thread \&MakeDNSLookup, $Host;
									my $t = threads->create(sub { MakeDNSLookup($Host) });
									if (! $t) { error("Failed to create new thread"); }
									if ($Debug) { debug(" Reverse DNS lookup for $Host queued in thread ".$t->tid,4); }
									$t->detach();	# We don't need to keep return code
								}
								else {
									if ($Debug) { debug(" Reverse DNS lookup for $Host already queued in a thread"); }
								}
								# Here, this is the only way, $TmpDNSLookup{$Host} can be not defined
							} else {
								&MakeDNSLookup($Host);
								if ($Debug) { debug("  Reverse DNS lookup for $Host done: $TmpDNSLookup{$Host}",4); }
							}				
						}
						elsif ($ip == 6) {
							$TmpDNSLookup{$Host}='*';
							if ($Debug) { debug("  Reverse DNS lookup for $Host not available for IPv6",4); }
						}
					}
				} else {
					if ($Debug) { debug("  Reverse DNS lookup already queued or done for $Host: $TmpDNSLookup{$Host}",4); }
				}
			}
			else {
				if ($Debug) { debug("  DNS lookup by static DNS cache file asked for $Host but not found.",4); }
			}
		}
		else {
			if ($Debug) { debug("  DNS lookup asked for $Host but this is not an IP address.",4); }
			$DNSLookupAlreadyDone=$LogFileToDo{$logfilechosen};
		}
	}
	else {
		if ($linerecord{$logfilechosen} =~ /(\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3})/) { $ip=4; $Host=$1; }	# IPv4
		elsif ($linerecord{$logfilechosen} =~ /([0-9A-F]*:)/i) { $ip=6; $Host=$1; }						# IPv6
		if ($Debug) { debug("  No DNS lookup asked.",4); }
	}

	# Put record in record queue
	if ($Debug) { debug("Add record $NbOfLinesParsed in record queue (with host to resolve = ".($Host?$Host:'*').")",4); }
	$QueueRecords{$NbOfLinesParsed}=$linerecord{$logfilechosen};

	# Put record in host queue
	# If there is a host to resolve, we add line to queue with value of host to resolve
	# $Host is '' (no ip found) or is ip
	if ($DNSLookup==0) {
		$QueueHostsToResolve{$NbOfLinesParsed}='*';
	}
	if ($DNSLookup==1) { 
		$QueueHostsToResolve{$NbOfLinesParsed}=$Host?$Host:'*';
	}
	if ($DNSLookup==2) {
		$QueueHostsToResolve{$NbOfLinesParsed}=$MyDNSTable{$Host}?$Host:'*';
	}

	# Print all records in head of queue that are ready
	&WriteRecordsReadyInQueue($logfilechosen);
	
}	# End of processing new record. Loop on next one.

if ($Debug) { debug("End of processing log file(s)"); }

# Close all log files
foreach my $logfilenb (keys %LogFileToDo) {
	if ($Debug) { debug("Close log file number $logfilenb"); }
	close("LOG$logfilenb") || error("Command for pipe '$LogFileToDo{$logfilenb}' failed");
}

while ( $QueueHostsToResolve{$QueueCursor} && $QueueHostsToResolve{$QueueCursor} ne '*' && ! $MyDNSTable{$QueueHostsToResolve{$QueueCursor}} && ! $TmpDNSLookup{$QueueHostsToResolve{$QueueCursor}} ) {
	sleep 1;
	# Print all records in head of queue that are ready
	&WriteRecordsReadyInQueue($logfilechosen);
}

# Waiting queue is empty
if ($MaxNbOfThread) {
	foreach my $t (threads->list()) {
		if ($Debug) { debug("Join thread $t"); }
		$t->join();
	}
}

# DNSLookup warning
if ($DNSLookup==1 && $DNSLookupAlreadyDone) {
	warning("Warning: $PROG has detected that some host names were already resolved in your logfile $DNSLookupAlreadyDone.\nIf DNS lookup was already made by the logger (web server) in ALL your log files, you should not use -dnslookup option to increase $PROG speed.");
}

if ($Debug) {
	debug("Total nb of read lines: $NbOfLinesRead");
	debug("Total nb of parsed lines: $NbOfLinesParsed");
	debug("Total nb of DNS lookup asked: $NbOfDNSLookupAsked");
}

#if ($DNSCache) {
#	open(CACHE, ">$DNSCache") or die;
#	foreach (keys %TmpDNSLookup) {
#		$TmpDNSLookup{$_}="*" if $TmpDNSLookup{$_} eq "ip";
#		print CACHE "0\t$_\t$TmpDNSLookup{$_}\n";
#	}
#	close CACHE;
#}

0;	# Do not remove this line