*  ================================================================
*  This file contains the following LAPACK routines, for use by the
*  BLACS tester:  LSAME, SLAMCH, DLAMCH, DLARND, ZLARND, DLARAN,
*  and ZLARAN. If you have ScaLAPACK or LAPACK, all of these files
*  are present in your library, and you may discard this file and 
*  point to the appropriate archive instead.
*  ================================================================

      DOUBLE PRECISION FUNCTION DLAMCH( CMACH )
*
*  -- LAPACK auxiliary routine (version 2.0) --
*     Univ. of Tennessee, Univ. of California Berkeley, NAG Ltd.,
*     Courant Institute, Argonne National Lab, and Rice University
*     October 31, 1992
*
*     .. Scalar Arguments ..
      CHARACTER          CMACH
*     ..
*
*  Purpose
*  =======
*
*  DLAMCH determines double precision machine parameters.
*
*  Arguments
*  =========
*
*  CMACH   (input) CHARACTER*1
*          Specifies the value to be returned by DLAMCH:
*          = 'E' or 'e',   DLAMCH := eps
*          = 'S' or 's ,   DLAMCH := sfmin
*          = 'B' or 'b',   DLAMCH := base
*          = 'P' or 'p',   DLAMCH := eps*base
*          = 'N' or 'n',   DLAMCH := t
*          = 'R' or 'r',   DLAMCH := rnd
*          = 'M' or 'm',   DLAMCH := emin
*          = 'U' or 'u',   DLAMCH := rmin
*          = 'L' or 'l',   DLAMCH := emax
*          = 'O' or 'o',   DLAMCH := rmax
*
*          where
*
*          eps   = relative machine precision
*          sfmin = safe minimum, such that 1/sfmin does not overflow
*          base  = base of the machine
*          prec  = eps*base
*          t     = number of (base) digits in the mantissa
*          rnd   = 1.0 when rounding occurs in addition, 0.0 otherwise
*          emin  = minimum exponent before (gradual) underflow
*          rmin  = underflow threshold - base**(emin-1)
*          emax  = largest exponent before overflow
*          rmax  = overflow threshold  - (base**emax)*(1-eps)
*
* =====================================================================
*
*     .. Parameters ..
      DOUBLE PRECISION   ONE, ZERO
      PARAMETER          ( ONE = 1.0D+0, ZERO = 0.0D+0 )
*     ..
*     .. Local Scalars ..
      LOGICAL            FIRST, LRND
      INTEGER            BETA, IMAX, IMIN, IT
      DOUBLE PRECISION   BASE, EMAX, EMIN, EPS, PREC, RMACH, RMAX, RMIN,
     $                   RND, SFMIN, SMALL, T
*     ..
*     .. External Functions ..
      LOGICAL            LSAME
      EXTERNAL           LSAME
*     ..
*     .. External Subroutines ..
      EXTERNAL           DLAMC2
*     ..
*     .. Save statement ..
      SAVE               FIRST, EPS, SFMIN, BASE, T, RND, EMIN, RMIN,
     $                   EMAX, RMAX, PREC
*     ..
*     .. Data statements ..
      DATA               FIRST / .TRUE. /
*     ..
*     .. Executable Statements ..
*
      IF( FIRST ) THEN
         FIRST = .FALSE.
         CALL DLAMC2( BETA, IT, LRND, EPS, IMIN, RMIN, IMAX, RMAX )
         BASE = BETA
         T = IT
         IF( LRND ) THEN
            RND = ONE
            EPS = ( BASE**( 1-IT ) ) / 2
         ELSE
            RND = ZERO
            EPS = BASE**( 1-IT )
         END IF
         PREC = EPS*BASE
         EMIN = IMIN
         EMAX = IMAX
         SFMIN = RMIN
         SMALL = ONE / RMAX
         IF( SMALL.GE.SFMIN ) THEN
*
*           Use SMALL plus a bit, to avoid the possibility of rounding
*           causing overflow when computing  1/sfmin.
*
            SFMIN = SMALL*( ONE+EPS )
         END IF
      END IF
*
      IF( LSAME( CMACH, 'E' ) ) THEN
         RMACH = EPS
      ELSE IF( LSAME( CMACH, 'S' ) ) THEN
         RMACH = SFMIN
      ELSE IF( LSAME( CMACH, 'B' ) ) THEN
         RMACH = BASE
      ELSE IF( LSAME( CMACH, 'P' ) ) THEN
         RMACH = PREC
      ELSE IF( LSAME( CMACH, 'N' ) ) THEN
         RMACH = T
      ELSE IF( LSAME( CMACH, 'R' ) ) THEN
         RMACH = RND
      ELSE IF( LSAME( CMACH, 'M' ) ) THEN
         RMACH = EMIN
      ELSE IF( LSAME( CMACH, 'U' ) ) THEN
         RMACH = RMIN
      ELSE IF( LSAME( CMACH, 'L' ) ) THEN
         RMACH = EMAX
      ELSE IF( LSAME( CMACH, 'O' ) ) THEN
         RMACH = RMAX
      END IF
*
      DLAMCH = RMACH
      RETURN
*
*     End of DLAMCH
*
      END
*
************************************************************************
*
      SUBROUTINE DLAMC1( BETA, T, RND, IEEE1 )
*
*  -- LAPACK auxiliary routine (version 2.0) --
*     Univ. of Tennessee, Univ. of California Berkeley, NAG Ltd.,
*     Courant Institute, Argonne National Lab, and Rice University
*     October 31, 1992
*
*     .. Scalar Arguments ..
      LOGICAL            IEEE1, RND
      INTEGER            BETA, T
*     ..
*
*  Purpose
*  =======
*
*  DLAMC1 determines the machine parameters given by BETA, T, RND, and
*  IEEE1.
*
*  Arguments
*  =========
*
*  BETA    (output) INTEGER
*          The base of the machine.
*
*  T       (output) INTEGER
*          The number of ( BETA ) digits in the mantissa.
*
*  RND     (output) LOGICAL
*          Specifies whether proper rounding  ( RND = .TRUE. )  or
*          chopping  ( RND = .FALSE. )  occurs in addition. This may not
*          be a reliable guide to the way in which the machine performs
*          its arithmetic.
*
*  IEEE1   (output) LOGICAL
*          Specifies whether rounding appears to be done in the IEEE
*          'round to nearest' style.
*
*  Further Details
*  ===============
*
*  The routine is based on the routine  ENVRON  by Malcolm and
*  incorporates suggestions by Gentleman and Marovich. See
*
*     Malcolm M. A. (1972) Algorithms to reveal properties of
*        floating-point arithmetic. Comms. of the ACM, 15, 949-951.
*
*     Gentleman W. M. and Marovich S. B. (1974) More on algorithms
*        that reveal properties of floating point arithmetic units.
*        Comms. of the ACM, 17, 276-277.
*
* =====================================================================
*
*     .. Local Scalars ..
      LOGICAL            FIRST, LIEEE1, LRND
      INTEGER            LBETA, LT
      DOUBLE PRECISION   A, B, C, F, ONE, QTR, SAVEC, T1, T2
*     ..
*     .. External Functions ..
      DOUBLE PRECISION   DLAMC3
      EXTERNAL           DLAMC3
*     ..
*     .. Save statement ..
      SAVE               FIRST, LIEEE1, LBETA, LRND, LT
*     ..
*     .. Data statements ..
      DATA               FIRST / .TRUE. /
*     ..
*     .. Executable Statements ..
*
      IF( FIRST ) THEN
         FIRST = .FALSE.
         ONE = 1
*
*        LBETA,  LIEEE1,  LT and  LRND  are the  local values  of  BETA,
*        IEEE1, T and RND.
*
*        Throughout this routine  we use the function  DLAMC3  to ensure
*        that relevant values are  stored and not held in registers,  or
*        are not affected by optimizers.
*
*        Compute  a = 2.0**m  with the  smallest positive integer m such
*        that
*
*           fl( a + 1.0 ) = a.
*
         A = 1
         C = 1
*
*+       WHILE( C.EQ.ONE )LOOP
   10    CONTINUE
         IF( C.EQ.ONE ) THEN
            A = 2*A
            C = DLAMC3( A, ONE )
            C = DLAMC3( C, -A )
            GO TO 10
         END IF
*+       END WHILE
*
*        Now compute  b = 2.0**m  with the smallest positive integer m
*        such that
*
*           fl( a + b ) .gt. a.
*
         B = 1
         C = DLAMC3( A, B )
*
*+       WHILE( C.EQ.A )LOOP
   20    CONTINUE
         IF( C.EQ.A ) THEN
            B = 2*B
            C = DLAMC3( A, B )
            GO TO 20
         END IF
*+       END WHILE
*
*        Now compute the base.  a and c  are neighbouring floating point
*        numbers  in the  interval  ( beta**t, beta**( t + 1 ) )  and so
*        their difference is beta. Adding 0.25 to c is to ensure that it
*        is truncated to beta and not ( beta - 1 ).
*
         QTR = ONE / 4
         SAVEC = C
         C = DLAMC3( C, -A )
         LBETA = C + QTR
*
*        Now determine whether rounding or chopping occurs,  by adding a
*        bit  less  than  beta/2  and a  bit  more  than  beta/2  to  a.
*
         B = LBETA
         F = DLAMC3( B / 2, -B / 100 )
         C = DLAMC3( F, A )
         IF( C.EQ.A ) THEN
            LRND = .TRUE.
         ELSE
            LRND = .FALSE.
         END IF
         F = DLAMC3( B / 2, B / 100 )
         C = DLAMC3( F, A )
         IF( ( LRND ) .AND. ( C.EQ.A ) )
     $      LRND = .FALSE.
*
*        Try and decide whether rounding is done in the  IEEE  'round to
*        nearest' style. B/2 is half a unit in the last place of the two
*        numbers A and SAVEC. Furthermore, A is even, i.e. has last  bit
*        zero, and SAVEC is odd. Thus adding B/2 to A should not  change
*        A, but adding B/2 to SAVEC should change SAVEC.
*
         T1 = DLAMC3( B / 2, A )
         T2 = DLAMC3( B / 2, SAVEC )
         LIEEE1 = ( T1.EQ.A ) .AND. ( T2.GT.SAVEC ) .AND. LRND
*
*        Now find  the  mantissa, t.  It should  be the  integer part of
*        log to the base beta of a,  however it is safer to determine  t
*        by powering.  So we find t as the smallest positive integer for
*        which
*
*           fl( beta**t + 1.0 ) = 1.0.
*
         LT = 0
         A = 1
         C = 1
*
*+       WHILE( C.EQ.ONE )LOOP
   30    CONTINUE
         IF( C.EQ.ONE ) THEN
            LT = LT + 1
            A = A*LBETA
            C = DLAMC3( A, ONE )
            C = DLAMC3( C, -A )
            GO TO 30
         END IF
*+       END WHILE
*
      END IF
*
      BETA = LBETA
      T = LT
      RND = LRND
      IEEE1 = LIEEE1
      RETURN
*
*     End of DLAMC1
*
      END
*
************************************************************************
*
      SUBROUTINE DLAMC2( BETA, T, RND, EPS, EMIN, RMIN, EMAX, RMAX )
*
*  -- LAPACK auxiliary routine (version 2.0) --
*     Univ. of Tennessee, Univ. of California Berkeley, NAG Ltd.,
*     Courant Institute, Argonne National Lab, and Rice University
*     October 31, 1992
*
*     .. Scalar Arguments ..
      LOGICAL            RND
      INTEGER            BETA, EMAX, EMIN, T
      DOUBLE PRECISION   EPS, RMAX, RMIN
*     ..
*
*  Purpose
*  =======
*
*  DLAMC2 determines the machine parameters specified in its argument
*  list.
*
*  Arguments
*  =========
*
*  BETA    (output) INTEGER
*          The base of the machine.
*
*  T       (output) INTEGER
*          The number of ( BETA ) digits in the mantissa.
*
*  RND     (output) LOGICAL
*          Specifies whether proper rounding  ( RND = .TRUE. )  or
*          chopping  ( RND = .FALSE. )  occurs in addition. This may not
*          be a reliable guide to the way in which the machine performs
*          its arithmetic.
*
*  EPS     (output) DOUBLE PRECISION
*          The smallest positive number such that
*
*             fl( 1.0 - EPS ) .LT. 1.0,
*
*          where fl denotes the computed value.
*
*  EMIN    (output) INTEGER
*          The minimum exponent before (gradual) underflow occurs.
*
*  RMIN    (output) DOUBLE PRECISION
*          The smallest normalized number for the machine, given by
*          BASE**( EMIN - 1 ), where  BASE  is the floating point value
*          of BETA.
*
*  EMAX    (output) INTEGER
*          The maximum exponent before overflow occurs.
*
*  RMAX    (output) DOUBLE PRECISION
*          The largest positive number for the machine, given by
*          BASE**EMAX * ( 1 - EPS ), where  BASE  is the floating point
*          value of BETA.
*
*  Further Details
*  ===============
*
*  The computation of  EPS  is based on a routine PARANOIA by
*  W. Kahan of the University of California at Berkeley.
*
* =====================================================================
*
*     .. Local Scalars ..
      LOGICAL            FIRST, IEEE, IWARN, LIEEE1, LRND
      INTEGER            GNMIN, GPMIN, I, LBETA, LEMAX, LEMIN, LT,
     $                   NGNMIN, NGPMIN
      DOUBLE PRECISION   A, B, C, HALF, LEPS, LRMAX, LRMIN, ONE, RBASE,
     $                   SIXTH, SMALL, THIRD, TWO, ZERO
*     ..
*     .. External Functions ..
      DOUBLE PRECISION   DLAMC3
      EXTERNAL           DLAMC3
*     ..
*     .. External Subroutines ..
      EXTERNAL           DLAMC1, DLAMC4, DLAMC5
*     ..
*     .. Intrinsic Functions ..
      INTRINSIC          ABS, MAX, MIN
*     ..
*     .. Save statement ..
      SAVE               FIRST, IWARN, LBETA, LEMAX, LEMIN, LEPS, LRMAX,
     $                   LRMIN, LT
*     ..
*     .. Data statements ..
      DATA               FIRST / .TRUE. / , IWARN / .FALSE. /
*     ..
*     .. Executable Statements ..
*
      IF( FIRST ) THEN
         FIRST = .FALSE.
         ZERO = 0
         ONE = 1
         TWO = 2
*
*        LBETA, LT, LRND, LEPS, LEMIN and LRMIN  are the local values of
*        BETA, T, RND, EPS, EMIN and RMIN.
*
*        Throughout this routine  we use the function  DLAMC3  to ensure
*        that relevant values are stored  and not held in registers,  or
*        are not affected by optimizers.
*
*        DLAMC1 returns the parameters  LBETA, LT, LRND and LIEEE1.
*
         CALL DLAMC1( LBETA, LT, LRND, LIEEE1 )
*
*        Start to find EPS.
*
         B = LBETA
         A = B**( -LT )
         LEPS = A
*
*        Try some tricks to see whether or not this is the correct  EPS.
*
         B = TWO / 3
         HALF = ONE / 2
         SIXTH = DLAMC3( B, -HALF )
         THIRD = DLAMC3( SIXTH, SIXTH )
         B = DLAMC3( THIRD, -HALF )
         B = DLAMC3( B, SIXTH )
         B = ABS( B )
         IF( B.LT.LEPS )
     $      B = LEPS
*
         LEPS = 1
*
*+       WHILE( ( LEPS.GT.B ).AND.( B.GT.ZERO ) )LOOP
   10    CONTINUE
         IF( ( LEPS.GT.B ) .AND. ( B.GT.ZERO ) ) THEN
            LEPS = B
            C = DLAMC3( HALF*LEPS, ( TWO**5 )*( LEPS**2 ) )
            C = DLAMC3( HALF, -C )
            B = DLAMC3( HALF, C )
            C = DLAMC3( HALF, -B )
            B = DLAMC3( HALF, C )
            GO TO 10
         END IF
*+       END WHILE
*
         IF( A.LT.LEPS )
     $      LEPS = A
*
*        Computation of EPS complete.
*
*        Now find  EMIN.  Let A = + or - 1, and + or - (1 + BASE**(-3)).
*        Keep dividing  A by BETA until (gradual) underflow occurs. This
*        is detected when we cannot recover the previous A.
*
         RBASE = ONE / LBETA
         SMALL = ONE
         DO 20 I = 1, 3
            SMALL = DLAMC3( SMALL*RBASE, ZERO )
   20    CONTINUE
         A = DLAMC3( ONE, SMALL )
         CALL DLAMC4( NGPMIN, ONE, LBETA )
         CALL DLAMC4( NGNMIN, -ONE, LBETA )
         CALL DLAMC4( GPMIN, A, LBETA )
         CALL DLAMC4( GNMIN, -A, LBETA )
         IEEE = .FALSE.
*
         IF( ( NGPMIN.EQ.NGNMIN ) .AND. ( GPMIN.EQ.GNMIN ) ) THEN
            IF( NGPMIN.EQ.GPMIN ) THEN
               LEMIN = NGPMIN
*            ( Non twos-complement machines, no gradual underflow;
*              e.g.,  VAX )
            ELSE IF( ( GPMIN-NGPMIN ).EQ.3 ) THEN
               LEMIN = NGPMIN - 1 + LT
               IEEE = .TRUE.
*            ( Non twos-complement machines, with gradual underflow;
*              e.g., IEEE standard followers )
            ELSE
               LEMIN = MIN( NGPMIN, GPMIN )
*            ( A guess; no known machine )
               IWARN = .TRUE.
            END IF
*
         ELSE IF( ( NGPMIN.EQ.GPMIN ) .AND. ( NGNMIN.EQ.GNMIN ) ) THEN
            IF( ABS( NGPMIN-NGNMIN ).EQ.1 ) THEN
               LEMIN = MAX( NGPMIN, NGNMIN )
*            ( Twos-complement machines, no gradual underflow;
*              e.g., CYBER 205 )
            ELSE
               LEMIN = MIN( NGPMIN, NGNMIN )
*            ( A guess; no known machine )
               IWARN = .TRUE.
            END IF
*
         ELSE IF( ( ABS( NGPMIN-NGNMIN ).EQ.1 ) .AND.
     $            ( GPMIN.EQ.GNMIN ) ) THEN
            IF( ( GPMIN-MIN( NGPMIN, NGNMIN ) ).EQ.3 ) THEN
               LEMIN = MAX( NGPMIN, NGNMIN ) - 1 + LT
*            ( Twos-complement machines with gradual underflow;
*              no known machine )
            ELSE
               LEMIN = MIN( NGPMIN, NGNMIN )
*            ( A guess; no known machine )
               IWARN = .TRUE.
            END IF
*
         ELSE
            LEMIN = MIN( NGPMIN, NGNMIN, GPMIN, GNMIN )
*         ( A guess; no known machine )
            IWARN = .TRUE.
         END IF
***
* Comment out this if block if EMIN is ok
         IF( IWARN ) THEN
            FIRST = .TRUE.
            WRITE( 6, FMT = 9999 )LEMIN
         END IF
***
*
*        Assume IEEE arithmetic if we found denormalised  numbers above,
*        or if arithmetic seems to round in the  IEEE style,  determined
*        in routine DLAMC1. A true IEEE machine should have both  things
*        true; however, faulty machines may have one or the other.
*
         IEEE = IEEE .OR. LIEEE1
*
*        Compute  RMIN by successive division by  BETA. We could compute
*        RMIN as BASE**( EMIN - 1 ),  but some machines underflow during
*        this computation.
*
         LRMIN = 1
         DO 30 I = 1, 1 - LEMIN
            LRMIN = DLAMC3( LRMIN*RBASE, ZERO )
   30    CONTINUE
*
*        Finally, call DLAMC5 to compute EMAX and RMAX.
*
         CALL DLAMC5( LBETA, LT, LEMIN, IEEE, LEMAX, LRMAX )
      END IF
*
      BETA = LBETA
      T = LT
      RND = LRND
      EPS = LEPS
      EMIN = LEMIN
      RMIN = LRMIN
      EMAX = LEMAX
      RMAX = LRMAX
*
      RETURN
*
 9999 FORMAT( / / ' WARNING. The value EMIN may be incorrect:-',
     $      '  EMIN = ', I8, /
     $      ' If, after inspection, the value EMIN looks',
     $      ' acceptable please comment out ',
     $      / ' the IF block as marked within the code of routine',
     $      ' DLAMC2,', / ' otherwise supply EMIN explicitly.', / )
*
*     End of DLAMC2
*
      END
*
************************************************************************
*
      DOUBLE PRECISION FUNCTION DLAMC3( A, B )
*
*  -- LAPACK auxiliary routine (version 2.0) --
*     Univ. of Tennessee, Univ. of California Berkeley, NAG Ltd.,
*     Courant Institute, Argonne National Lab, and Rice University
*     October 31, 1992
*
*     .. Scalar Arguments ..
      DOUBLE PRECISION   A, B
*     ..
*
*  Purpose
*  =======
*
*  DLAMC3  is intended to force  A  and  B  to be stored prior to doing
*  the addition of  A  and  B ,  for use in situations where optimizers
*  might hold one of these in a register.
*
*  Arguments
*  =========
*
*  A, B    (input) DOUBLE PRECISION
*          The values A and B.
*
* =====================================================================
*
*     .. Executable Statements ..
*
      DLAMC3 = A + B
*
      RETURN
*
*     End of DLAMC3
*
      END
*
************************************************************************
*
      SUBROUTINE DLAMC4( EMIN, START, BASE )
*
*  -- LAPACK auxiliary routine (version 2.0) --
*     Univ. of Tennessee, Univ. of California Berkeley, NAG Ltd.,
*     Courant Institute, Argonne National Lab, and Rice University
*     October 31, 1992
*
*     .. Scalar Arguments ..
      INTEGER            BASE, EMIN
      DOUBLE PRECISION   START
*     ..
*
*  Purpose
*  =======
*
*  DLAMC4 is a service routine for DLAMC2.
*
*  Arguments
*  =========
*
*  EMIN    (output) EMIN
*          The minimum exponent before (gradual) underflow, computed by
*          setting A = START and dividing by BASE until the previous A
*          can not be recovered.
*
*  START   (input) DOUBLE PRECISION
*          The starting point for determining EMIN.
*
*  BASE    (input) INTEGER
*          The base of the machine.
*
* =====================================================================
*
*     .. Local Scalars ..
      INTEGER            I
      DOUBLE PRECISION   A, B1, B2, C1, C2, D1, D2, ONE, RBASE, ZERO
*     ..
*     .. External Functions ..
      DOUBLE PRECISION   DLAMC3
      EXTERNAL           DLAMC3
*     ..
*     .. Executable Statements ..
*
      A = START
      ONE = 1
      RBASE = ONE / BASE
      ZERO = 0
      EMIN = 1
      B1 = DLAMC3( A*RBASE, ZERO )
      C1 = A
      C2 = A
      D1 = A
      D2 = A
*+    WHILE( ( C1.EQ.A ).AND.( C2.EQ.A ).AND.
*    $       ( D1.EQ.A ).AND.( D2.EQ.A )      )LOOP
   10 CONTINUE
      IF( ( C1.EQ.A ) .AND. ( C2.EQ.A ) .AND. ( D1.EQ.A ) .AND.
     $    ( D2.EQ.A ) ) THEN
         EMIN = EMIN - 1
         A = B1
         B1 = DLAMC3( A / BASE, ZERO )
         C1 = DLAMC3( B1*BASE, ZERO )
         D1 = ZERO
         DO 20 I = 1, BASE
            D1 = D1 + B1
   20    CONTINUE
         B2 = DLAMC3( A*RBASE, ZERO )
         C2 = DLAMC3( B2 / RBASE, ZERO )
         D2 = ZERO
         DO 30 I = 1, BASE
            D2 = D2 + B2
   30    CONTINUE
         GO TO 10
      END IF
*+    END WHILE
*
      RETURN
*
*     End of DLAMC4
*
      END
*
************************************************************************
*
      SUBROUTINE DLAMC5( BETA, P, EMIN, IEEE, EMAX, RMAX )
*
*  -- LAPACK auxiliary routine (version 2.0) --
*     Univ. of Tennessee, Univ. of California Berkeley, NAG Ltd.,
*     Courant Institute, Argonne National Lab, and Rice University
*     October 31, 1992
*
*     .. Scalar Arguments ..
      LOGICAL            IEEE
      INTEGER            BETA, EMAX, EMIN, P
      DOUBLE PRECISION   RMAX
*     ..
*
*  Purpose
*  =======
*
*  DLAMC5 attempts to compute RMAX, the largest machine floating-point
*  number, without overflow.  It assumes that EMAX + abs(EMIN) sum
*  approximately to a power of 2.  It will fail on machines where this
*  assumption does not hold, for example, the Cyber 205 (EMIN = -28625,
*  EMAX = 28718).  It will also fail if the value supplied for EMIN is
*  too large (i.e. too close to zero), probably with overflow.
*
*  Arguments
*  =========
*
*  BETA    (input) INTEGER
*          The base of floating-point arithmetic.
*
*  P       (input) INTEGER
*          The number of base BETA digits in the mantissa of a
*          floating-point value.
*
*  EMIN    (input) INTEGER
*          The minimum exponent before (gradual) underflow.
*
*  IEEE    (input) LOGICAL
*          A logical flag specifying whether or not the arithmetic
*          system is thought to comply with the IEEE standard.
*
*  EMAX    (output) INTEGER
*          The largest exponent before overflow
*
*  RMAX    (output) DOUBLE PRECISION
*          The largest machine floating-point number.
*
* =====================================================================
*
*     .. Parameters ..
      DOUBLE PRECISION   ZERO, ONE
      PARAMETER          ( ZERO = 0.0D0, ONE = 1.0D0 )
*     ..
*     .. Local Scalars ..
      INTEGER            EXBITS, EXPSUM, I, LEXP, NBITS, TRY, UEXP
      DOUBLE PRECISION   OLDY, RECBAS, Y, Z
*     ..
*     .. External Functions ..
      DOUBLE PRECISION   DLAMC3
      EXTERNAL           DLAMC3
*     ..
*     .. Intrinsic Functions ..
      INTRINSIC          MOD
*     ..
*     .. Executable Statements ..
*
*     First compute LEXP and UEXP, two powers of 2 that bound
*     abs(EMIN). We then assume that EMAX + abs(EMIN) will sum
*     approximately to the bound that is closest to abs(EMIN).
*     (EMAX is the exponent of the required number RMAX).
*
      LEXP = 1
      EXBITS = 1
   10 CONTINUE
      TRY = LEXP*2
      IF( TRY.LE.( -EMIN ) ) THEN
         LEXP = TRY
         EXBITS = EXBITS + 1
         GO TO 10
      END IF
      IF( LEXP.EQ.-EMIN ) THEN
         UEXP = LEXP
      ELSE
         UEXP = TRY
         EXBITS = EXBITS + 1
      END IF
*
*     Now -LEXP is less than or equal to EMIN, and -UEXP is greater
*     than or equal to EMIN. EXBITS is the number of bits needed to
*     store the exponent.
*
      IF( ( UEXP+EMIN ).GT.( -LEXP-EMIN ) ) THEN
         EXPSUM = 2*LEXP
      ELSE
         EXPSUM = 2*UEXP
      END IF
*
*     EXPSUM is the exponent range, approximately equal to
*     EMAX - EMIN + 1 .
*
      EMAX = EXPSUM + EMIN - 1
      NBITS = 1 + EXBITS + P
*
*     NBITS is the total number of bits needed to store a
*     floating-point number.
*
      IF( ( MOD( NBITS, 2 ).EQ.1 ) .AND. ( BETA.EQ.2 ) ) THEN
*
*        Either there are an odd number of bits used to store a
*        floating-point number, which is unlikely, or some bits are
*        not used in the representation of numbers, which is possible,
*        (e.g. Cray machines) or the mantissa has an implicit bit,
*        (e.g. IEEE machines, Dec Vax machines), which is perhaps the
*        most likely. We have to assume the last alternative.
*        If this is true, then we need to reduce EMAX by one because
*        there must be some way of representing zero in an implicit-bit
*        system. On machines like Cray, we are reducing EMAX by one
*        unnecessarily.
*
         EMAX = EMAX - 1
      END IF
*
      IF( IEEE ) THEN
*
*        Assume we are on an IEEE machine which reserves one exponent
*        for infinity and NaN.
*
         EMAX = EMAX - 1
      END IF
*
*     Now create RMAX, the largest machine number, which should
*     be equal to (1.0 - BETA**(-P)) * BETA**EMAX .
*
*     First compute 1.0 - BETA**(-P), being careful that the
*     result is less than 1.0 .
*
      RECBAS = ONE / BETA
      Z = BETA - ONE
      Y = ZERO
      DO 20 I = 1, P
         Z = Z*RECBAS
         IF( Y.LT.ONE )
     $      OLDY = Y
         Y = DLAMC3( Y, Z )
   20 CONTINUE
      IF( Y.GE.ONE )
     $   Y = OLDY
*
*     Now multiply by BETA**EMAX to get RMAX.
*
      DO 30 I = 1, EMAX
         Y = DLAMC3( Y*BETA, ZERO )
   30 CONTINUE
*
      RMAX = Y
      RETURN
*
*     End of DLAMC5
*
      END
      REAL             FUNCTION SLAMCH( CMACH )
*
*  -- LAPACK auxiliary routine (version 2.0) --
*     Univ. of Tennessee, Univ. of California Berkeley, NAG Ltd.,
*     Courant Institute, Argonne National Lab, and Rice University
*     October 31, 1992
*
*     .. Scalar Arguments ..
      CHARACTER          CMACH
*     ..
*
*  Purpose
*  =======
*
*  SLAMCH determines single precision machine parameters.
*
*  Arguments
*  =========
*
*  CMACH   (input) CHARACTER*1
*          Specifies the value to be returned by SLAMCH:
*          = 'E' or 'e',   SLAMCH := eps
*          = 'S' or 's ,   SLAMCH := sfmin
*          = 'B' or 'b',   SLAMCH := base
*          = 'P' or 'p',   SLAMCH := eps*base
*          = 'N' or 'n',   SLAMCH := t
*          = 'R' or 'r',   SLAMCH := rnd
*          = 'M' or 'm',   SLAMCH := emin
*          = 'U' or 'u',   SLAMCH := rmin
*          = 'L' or 'l',   SLAMCH := emax
*          = 'O' or 'o',   SLAMCH := rmax
*
*          where
*
*          eps   = relative machine precision
*          sfmin = safe minimum, such that 1/sfmin does not overflow
*          base  = base of the machine
*          prec  = eps*base
*          t     = number of (base) digits in the mantissa
*          rnd   = 1.0 when rounding occurs in addition, 0.0 otherwise
*          emin  = minimum exponent before (gradual) underflow
*          rmin  = underflow threshold - base**(emin-1)
*          emax  = largest exponent before overflow
*          rmax  = overflow threshold  - (base**emax)*(1-eps)
*
* =====================================================================
*
*     .. Parameters ..
      REAL               ONE, ZERO
      PARAMETER          ( ONE = 1.0E+0, ZERO = 0.0E+0 )
*     ..
*     .. Local Scalars ..
      LOGICAL            FIRST, LRND
      INTEGER            BETA, IMAX, IMIN, IT
      REAL               BASE, EMAX, EMIN, EPS, PREC, RMACH, RMAX, RMIN,
     $                   RND, SFMIN, SMALL, T
*     ..
*     .. External Functions ..
      LOGICAL            LSAME
      EXTERNAL           LSAME
*     ..
*     .. External Subroutines ..
      EXTERNAL           SLAMC2
*     ..
*     .. Save statement ..
      SAVE               FIRST, EPS, SFMIN, BASE, T, RND, EMIN, RMIN,
     $                   EMAX, RMAX, PREC
*     ..
*     .. Data statements ..
      DATA               FIRST / .TRUE. /
*     ..
*     .. Executable Statements ..
*
      IF( FIRST ) THEN
         FIRST = .FALSE.
         CALL SLAMC2( BETA, IT, LRND, EPS, IMIN, RMIN, IMAX, RMAX )
         BASE = BETA
         T = IT
         IF( LRND ) THEN
            RND = ONE
            EPS = ( BASE**( 1-IT ) ) / 2
         ELSE
            RND = ZERO
            EPS = BASE**( 1-IT )
         END IF
         PREC = EPS*BASE
         EMIN = IMIN
         EMAX = IMAX
         SFMIN = RMIN
         SMALL = ONE / RMAX
         IF( SMALL.GE.SFMIN ) THEN
*
*           Use SMALL plus a bit, to avoid the possibility of rounding
*           causing overflow when computing  1/sfmin.
*
            SFMIN = SMALL*( ONE+EPS )
         END IF
      END IF
*
      IF( LSAME( CMACH, 'E' ) ) THEN
         RMACH = EPS
      ELSE IF( LSAME( CMACH, 'S' ) ) THEN
         RMACH = SFMIN
      ELSE IF( LSAME( CMACH, 'B' ) ) THEN
         RMACH = BASE
      ELSE IF( LSAME( CMACH, 'P' ) ) THEN
         RMACH = PREC
      ELSE IF( LSAME( CMACH, 'N' ) ) THEN
         RMACH = T
      ELSE IF( LSAME( CMACH, 'R' ) ) THEN
         RMACH = RND
      ELSE IF( LSAME( CMACH, 'M' ) ) THEN
         RMACH = EMIN
      ELSE IF( LSAME( CMACH, 'U' ) ) THEN
         RMACH = RMIN
      ELSE IF( LSAME( CMACH, 'L' ) ) THEN
         RMACH = EMAX
      ELSE IF( LSAME( CMACH, 'O' ) ) THEN
         RMACH = RMAX
      END IF
*
      SLAMCH = RMACH
      RETURN
*
*     End of SLAMCH
*
      END
*
************************************************************************
*
      SUBROUTINE SLAMC1( BETA, T, RND, IEEE1 )
*
*  -- LAPACK auxiliary routine (version 2.0) --
*     Univ. of Tennessee, Univ. of California Berkeley, NAG Ltd.,
*     Courant Institute, Argonne National Lab, and Rice University
*     October 31, 1992
*
*     .. Scalar Arguments ..
      LOGICAL            IEEE1, RND
      INTEGER            BETA, T
*     ..
*
*  Purpose
*  =======
*
*  SLAMC1 determines the machine parameters given by BETA, T, RND, and
*  IEEE1.
*
*  Arguments
*  =========
*
*  BETA    (output) INTEGER
*          The base of the machine.
*
*  T       (output) INTEGER
*          The number of ( BETA ) digits in the mantissa.
*
*  RND     (output) LOGICAL
*          Specifies whether proper rounding  ( RND = .TRUE. )  or
*          chopping  ( RND = .FALSE. )  occurs in addition. This may not
*          be a reliable guide to the way in which the machine performs
*          its arithmetic.
*
*  IEEE1   (output) LOGICAL
*          Specifies whether rounding appears to be done in the IEEE
*          'round to nearest' style.
*
*  Further Details
*  ===============
*
*  The routine is based on the routine  ENVRON  by Malcolm and
*  incorporates suggestions by Gentleman and Marovich. See
*
*     Malcolm M. A. (1972) Algorithms to reveal properties of
*        floating-point arithmetic. Comms. of the ACM, 15, 949-951.
*
*     Gentleman W. M. and Marovich S. B. (1974) More on algorithms
*        that reveal properties of floating point arithmetic units.
*        Comms. of the ACM, 17, 276-277.
*
* =====================================================================
*
*     .. Local Scalars ..
      LOGICAL            FIRST, LIEEE1, LRND
      INTEGER            LBETA, LT
      REAL               A, B, C, F, ONE, QTR, SAVEC, T1, T2
*     ..
*     .. External Functions ..
      REAL               SLAMC3
      EXTERNAL           SLAMC3
*     ..
*     .. Save statement ..
      SAVE               FIRST, LIEEE1, LBETA, LRND, LT
*     ..
*     .. Data statements ..
      DATA               FIRST / .TRUE. /
*     ..
*     .. Executable Statements ..
*
      IF( FIRST ) THEN
         FIRST = .FALSE.
         ONE = 1
*
*        LBETA,  LIEEE1,  LT and  LRND  are the  local values  of  BETA,
*        IEEE1, T and RND.
*
*        Throughout this routine  we use the function  SLAMC3  to ensure
*        that relevant values are  stored and not held in registers,  or
*        are not affected by optimizers.
*
*        Compute  a = 2.0**m  with the  smallest positive integer m such
*        that
*
*           fl( a + 1.0 ) = a.
*
         A = 1
         C = 1
*
*+       WHILE( C.EQ.ONE )LOOP
   10    CONTINUE
         IF( C.EQ.ONE ) THEN
            A = 2*A
            C = SLAMC3( A, ONE )
            C = SLAMC3( C, -A )
            GO TO 10
         END IF
*+       END WHILE
*
*        Now compute  b = 2.0**m  with the smallest positive integer m
*        such that
*
*           fl( a + b ) .gt. a.
*
         B = 1
         C = SLAMC3( A, B )
*
*+       WHILE( C.EQ.A )LOOP
   20    CONTINUE
         IF( C.EQ.A ) THEN
            B = 2*B
            C = SLAMC3( A, B )
            GO TO 20
         END IF
*+       END WHILE
*
*        Now compute the base.  a and c  are neighbouring floating point
*        numbers  in the  interval  ( beta**t, beta**( t + 1 ) )  and so
*        their difference is beta. Adding 0.25 to c is to ensure that it
*        is truncated to beta and not ( beta - 1 ).
*
         QTR = ONE / 4
         SAVEC = C
         C = SLAMC3( C, -A )
         LBETA = C + QTR
*
*        Now determine whether rounding or chopping occurs,  by adding a
*        bit  less  than  beta/2  and a  bit  more  than  beta/2  to  a.
*
         B = LBETA
         F = SLAMC3( B / 2, -B / 100 )
         C = SLAMC3( F, A )
         IF( C.EQ.A ) THEN
            LRND = .TRUE.
         ELSE
            LRND = .FALSE.
         END IF
         F = SLAMC3( B / 2, B / 100 )
         C = SLAMC3( F, A )
         IF( ( LRND ) .AND. ( C.EQ.A ) )
     $      LRND = .FALSE.
*
*        Try and decide whether rounding is done in the  IEEE  'round to
*        nearest' style. B/2 is half a unit in the last place of the two
*        numbers A and SAVEC. Furthermore, A is even, i.e. has last  bit
*        zero, and SAVEC is odd. Thus adding B/2 to A should not  change
*        A, but adding B/2 to SAVEC should change SAVEC.
*
         T1 = SLAMC3( B / 2, A )
         T2 = SLAMC3( B / 2, SAVEC )
         LIEEE1 = ( T1.EQ.A ) .AND. ( T2.GT.SAVEC ) .AND. LRND
*
*        Now find  the  mantissa, t.  It should  be the  integer part of
*        log to the base beta of a,  however it is safer to determine  t
*        by powering.  So we find t as the smallest positive integer for
*        which
*
*           fl( beta**t + 1.0 ) = 1.0.
*
         LT = 0
         A = 1
         C = 1
*
*+       WHILE( C.EQ.ONE )LOOP
   30    CONTINUE
         IF( C.EQ.ONE ) THEN
            LT = LT + 1
            A = A*LBETA
            C = SLAMC3( A, ONE )
            C = SLAMC3( C, -A )
            GO TO 30
         END IF
*+       END WHILE
*
      END IF
*
      BETA = LBETA
      T = LT
      RND = LRND
      IEEE1 = LIEEE1
      RETURN
*
*     End of SLAMC1
*
      END
*
************************************************************************
*
      SUBROUTINE SLAMC2( BETA, T, RND, EPS, EMIN, RMIN, EMAX, RMAX )
*
*  -- LAPACK auxiliary routine (version 2.0) --
*     Univ. of Tennessee, Univ. of California Berkeley, NAG Ltd.,
*     Courant Institute, Argonne National Lab, and Rice University
*     October 31, 1992
*
*     .. Scalar Arguments ..
      LOGICAL            RND
      INTEGER            BETA, EMAX, EMIN, T
      REAL               EPS, RMAX, RMIN
*     ..
*
*  Purpose
*  =======
*
*  SLAMC2 determines the machine parameters specified in its argument
*  list.
*
*  Arguments
*  =========
*
*  BETA    (output) INTEGER
*          The base of the machine.
*
*  T       (output) INTEGER
*          The number of ( BETA ) digits in the mantissa.
*
*  RND     (output) LOGICAL
*          Specifies whether proper rounding  ( RND = .TRUE. )  or
*          chopping  ( RND = .FALSE. )  occurs in addition. This may not
*          be a reliable guide to the way in which the machine performs
*          its arithmetic.
*
*  EPS     (output) REAL
*          The smallest positive number such that
*
*             fl( 1.0 - EPS ) .LT. 1.0,
*
*          where fl denotes the computed value.
*
*  EMIN    (output) INTEGER
*          The minimum exponent before (gradual) underflow occurs.
*
*  RMIN    (output) REAL
*          The smallest normalized number for the machine, given by
*          BASE**( EMIN - 1 ), where  BASE  is the floating point value
*          of BETA.
*
*  EMAX    (output) INTEGER
*          The maximum exponent before overflow occurs.
*
*  RMAX    (output) REAL
*          The largest positive number for the machine, given by
*          BASE**EMAX * ( 1 - EPS ), where  BASE  is the floating point
*          value of BETA.
*
*  Further Details
*  ===============
*
*  The computation of  EPS  is based on a routine PARANOIA by
*  W. Kahan of the University of California at Berkeley.
*
* =====================================================================
*
*     .. Local Scalars ..
      LOGICAL            FIRST, IEEE, IWARN, LIEEE1, LRND
      INTEGER            GNMIN, GPMIN, I, LBETA, LEMAX, LEMIN, LT,
     $                   NGNMIN, NGPMIN
      REAL               A, B, C, HALF, LEPS, LRMAX, LRMIN, ONE, RBASE,
     $                   SIXTH, SMALL, THIRD, TWO, ZERO
*     ..
*     .. External Functions ..
      REAL               SLAMC3
      EXTERNAL           SLAMC3
*     ..
*     .. External Subroutines ..
      EXTERNAL           SLAMC1, SLAMC4, SLAMC5
*     ..
*     .. Intrinsic Functions ..
      INTRINSIC          ABS, MAX, MIN
*     ..
*     .. Save statement ..
      SAVE               FIRST, IWARN, LBETA, LEMAX, LEMIN, LEPS, LRMAX,
     $                   LRMIN, LT
*     ..
*     .. Data statements ..
      DATA               FIRST / .TRUE. / , IWARN / .FALSE. /
*     ..
*     .. Executable Statements ..
*
      IF( FIRST ) THEN
         FIRST = .FALSE.
         ZERO = 0
         ONE = 1
         TWO = 2
*
*        LBETA, LT, LRND, LEPS, LEMIN and LRMIN  are the local values of
*        BETA, T, RND, EPS, EMIN and RMIN.
*
*        Throughout this routine  we use the function  SLAMC3  to ensure
*        that relevant values are stored  and not held in registers,  or
*        are not affected by optimizers.
*
*        SLAMC1 returns the parameters  LBETA, LT, LRND and LIEEE1.
*
         CALL SLAMC1( LBETA, LT, LRND, LIEEE1 )
*
*        Start to find EPS.
*
         B = LBETA
         A = B**( -LT )
         LEPS = A
*
*        Try some tricks to see whether or not this is the correct  EPS.
*
         B = TWO / 3
         HALF = ONE / 2
         SIXTH = SLAMC3( B, -HALF )
         THIRD = SLAMC3( SIXTH, SIXTH )
         B = SLAMC3( THIRD, -HALF )
         B = SLAMC3( B, SIXTH )
         B = ABS( B )
         IF( B.LT.LEPS )
     $      B = LEPS
*
         LEPS = 1
*
*+       WHILE( ( LEPS.GT.B ).AND.( B.GT.ZERO ) )LOOP
   10    CONTINUE
         IF( ( LEPS.GT.B ) .AND. ( B.GT.ZERO ) ) THEN
            LEPS = B
            C = SLAMC3( HALF*LEPS, ( TWO**5 )*( LEPS**2 ) )
            C = SLAMC3( HALF, -C )
            B = SLAMC3( HALF, C )
            C = SLAMC3( HALF, -B )
            B = SLAMC3( HALF, C )
            GO TO 10
         END IF
*+       END WHILE
*
         IF( A.LT.LEPS )
     $      LEPS = A
*
*        Computation of EPS complete.
*
*        Now find  EMIN.  Let A = + or - 1, and + or - (1 + BASE**(-3)).
*        Keep dividing  A by BETA until (gradual) underflow occurs. This
*        is detected when we cannot recover the previous A.
*
         RBASE = ONE / LBETA
         SMALL = ONE
         DO 20 I = 1, 3
            SMALL = SLAMC3( SMALL*RBASE, ZERO )
   20    CONTINUE
         A = SLAMC3( ONE, SMALL )
         CALL SLAMC4( NGPMIN, ONE, LBETA )
         CALL SLAMC4( NGNMIN, -ONE, LBETA )
         CALL SLAMC4( GPMIN, A, LBETA )
         CALL SLAMC4( GNMIN, -A, LBETA )
         IEEE = .FALSE.
*
         IF( ( NGPMIN.EQ.NGNMIN ) .AND. ( GPMIN.EQ.GNMIN ) ) THEN
            IF( NGPMIN.EQ.GPMIN ) THEN
               LEMIN = NGPMIN
*            ( Non twos-complement machines, no gradual underflow;
*              e.g.,  VAX )
            ELSE IF( ( GPMIN-NGPMIN ).EQ.3 ) THEN
               LEMIN = NGPMIN - 1 + LT
               IEEE = .TRUE.
*            ( Non twos-complement machines, with gradual underflow;
*              e.g., IEEE standard followers )
            ELSE
               LEMIN = MIN( NGPMIN, GPMIN )
*            ( A guess; no known machine )
               IWARN = .TRUE.
            END IF
*
         ELSE IF( ( NGPMIN.EQ.GPMIN ) .AND. ( NGNMIN.EQ.GNMIN ) ) THEN
            IF( ABS( NGPMIN-NGNMIN ).EQ.1 ) THEN
               LEMIN = MAX( NGPMIN, NGNMIN )
*            ( Twos-complement machines, no gradual underflow;
*              e.g., CYBER 205 )
            ELSE
               LEMIN = MIN( NGPMIN, NGNMIN )
*            ( A guess; no known machine )
               IWARN = .TRUE.
            END IF
*
         ELSE IF( ( ABS( NGPMIN-NGNMIN ).EQ.1 ) .AND.
     $            ( GPMIN.EQ.GNMIN ) ) THEN
            IF( ( GPMIN-MIN( NGPMIN, NGNMIN ) ).EQ.3 ) THEN
               LEMIN = MAX( NGPMIN, NGNMIN ) - 1 + LT
*            ( Twos-complement machines with gradual underflow;
*              no known machine )
            ELSE
               LEMIN = MIN( NGPMIN, NGNMIN )
*            ( A guess; no known machine )
               IWARN = .TRUE.
            END IF
*
         ELSE
            LEMIN = MIN( NGPMIN, NGNMIN, GPMIN, GNMIN )
*         ( A guess; no known machine )
            IWARN = .TRUE.
         END IF
***
* Comment out this if block if EMIN is ok
         IF( IWARN ) THEN
            FIRST = .TRUE.
            WRITE( 6, FMT = 9999 )LEMIN
         END IF
***
*
*        Assume IEEE arithmetic if we found denormalised  numbers above,
*        or if arithmetic seems to round in the  IEEE style,  determined
*        in routine SLAMC1. A true IEEE machine should have both  things
*        true; however, faulty machines may have one or the other.
*
         IEEE = IEEE .OR. LIEEE1
*
*        Compute  RMIN by successive division by  BETA. We could compute
*        RMIN as BASE**( EMIN - 1 ),  but some machines underflow during
*        this computation.
*
         LRMIN = 1
         DO 30 I = 1, 1 - LEMIN
            LRMIN = SLAMC3( LRMIN*RBASE, ZERO )
   30    CONTINUE
*
*        Finally, call SLAMC5 to compute EMAX and RMAX.
*
         CALL SLAMC5( LBETA, LT, LEMIN, IEEE, LEMAX, LRMAX )
      END IF
*
      BETA = LBETA
      T = LT
      RND = LRND
      EPS = LEPS
      EMIN = LEMIN
      RMIN = LRMIN
      EMAX = LEMAX
      RMAX = LRMAX
*
      RETURN
*
 9999 FORMAT( / / ' WARNING. The value EMIN may be incorrect:-',
     $      '  EMIN = ', I8, /
     $      ' If, after inspection, the value EMIN looks',
     $      ' acceptable please comment out ',
     $      / ' the IF block as marked within the code of routine',
     $      ' SLAMC2,', / ' otherwise supply EMIN explicitly.', / )
*
*     End of SLAMC2
*
      END
*
************************************************************************
*
      REAL             FUNCTION SLAMC3( A, B )
*
*  -- LAPACK auxiliary routine (version 2.0) --
*     Univ. of Tennessee, Univ. of California Berkeley, NAG Ltd.,
*     Courant Institute, Argonne National Lab, and Rice University
*     October 31, 1992
*
*     .. Scalar Arguments ..
      REAL               A, B
*     ..
*
*  Purpose
*  =======
*
*  SLAMC3  is intended to force  A  and  B  to be stored prior to doing
*  the addition of  A  and  B ,  for use in situations where optimizers
*  might hold one of these in a register.
*
*  Arguments
*  =========
*
*  A, B    (input) REAL
*          The values A and B.
*
* =====================================================================
*
*     .. Executable Statements ..
*
      SLAMC3 = A + B
*
      RETURN
*
*     End of SLAMC3
*
      END
*
************************************************************************
*
      SUBROUTINE SLAMC4( EMIN, START, BASE )
*
*  -- LAPACK auxiliary routine (version 2.0) --
*     Univ. of Tennessee, Univ. of California Berkeley, NAG Ltd.,
*     Courant Institute, Argonne National Lab, and Rice University
*     October 31, 1992
*
*     .. Scalar Arguments ..
      INTEGER            BASE, EMIN
      REAL               START
*     ..
*
*  Purpose
*  =======
*
*  SLAMC4 is a service routine for SLAMC2.
*
*  Arguments
*  =========
*
*  EMIN    (output) EMIN
*          The minimum exponent before (gradual) underflow, computed by
*          setting A = START and dividing by BASE until the previous A
*          can not be recovered.
*
*  START   (input) REAL
*          The starting point for determining EMIN.
*
*  BASE    (input) INTEGER
*          The base of the machine.
*
* =====================================================================
*
*     .. Local Scalars ..
      INTEGER            I
      REAL               A, B1, B2, C1, C2, D1, D2, ONE, RBASE, ZERO
*     ..
*     .. External Functions ..
      REAL               SLAMC3
      EXTERNAL           SLAMC3
*     ..
*     .. Executable Statements ..
*
      A = START
      ONE = 1
      RBASE = ONE / BASE
      ZERO = 0
      EMIN = 1
      B1 = SLAMC3( A*RBASE, ZERO )
      C1 = A
      C2 = A
      D1 = A
      D2 = A
*+    WHILE( ( C1.EQ.A ).AND.( C2.EQ.A ).AND.
*    $       ( D1.EQ.A ).AND.( D2.EQ.A )      )LOOP
   10 CONTINUE
      IF( ( C1.EQ.A ) .AND. ( C2.EQ.A ) .AND. ( D1.EQ.A ) .AND.
     $    ( D2.EQ.A ) ) THEN
         EMIN = EMIN - 1
         A = B1
         B1 = SLAMC3( A / BASE, ZERO )
         C1 = SLAMC3( B1*BASE, ZERO )
         D1 = ZERO
         DO 20 I = 1, BASE
            D1 = D1 + B1
   20    CONTINUE
         B2 = SLAMC3( A*RBASE, ZERO )
         C2 = SLAMC3( B2 / RBASE, ZERO )
         D2 = ZERO
         DO 30 I = 1, BASE
            D2 = D2 + B2
   30    CONTINUE
         GO TO 10
      END IF
*+    END WHILE
*
      RETURN
*
*     End of SLAMC4
*
      END
*
************************************************************************
*
      SUBROUTINE SLAMC5( BETA, P, EMIN, IEEE, EMAX, RMAX )
*
*  -- LAPACK auxiliary routine (version 2.0) --
*     Univ. of Tennessee, Univ. of California Berkeley, NAG Ltd.,
*     Courant Institute, Argonne National Lab, and Rice University
*     October 31, 1992
*
*     .. Scalar Arguments ..
      LOGICAL            IEEE
      INTEGER            BETA, EMAX, EMIN, P
      REAL               RMAX
*     ..
*
*  Purpose
*  =======
*
*  SLAMC5 attempts to compute RMAX, the largest machine floating-point
*  number, without overflow.  It assumes that EMAX + abs(EMIN) sum
*  approximately to a power of 2.  It will fail on machines where this
*  assumption does not hold, for example, the Cyber 205 (EMIN = -28625,
*  EMAX = 28718).  It will also fail if the value supplied for EMIN is
*  too large (i.e. too close to zero), probably with overflow.
*
*  Arguments
*  =========
*
*  BETA    (input) INTEGER
*          The base of floating-point arithmetic.
*
*  P       (input) INTEGER
*          The number of base BETA digits in the mantissa of a
*          floating-point value.
*
*  EMIN    (input) INTEGER
*          The minimum exponent before (gradual) underflow.
*
*  IEEE    (input) LOGICAL
*          A logical flag specifying whether or not the arithmetic
*          system is thought to comply with the IEEE standard.
*
*  EMAX    (output) INTEGER
*          The largest exponent before overflow
*
*  RMAX    (output) REAL
*          The largest machine floating-point number.
*
* =====================================================================
*
*     .. Parameters ..
      REAL               ZERO, ONE
      PARAMETER          ( ZERO = 0.0E0, ONE = 1.0E0 )
*     ..
*     .. Local Scalars ..
      INTEGER            EXBITS, EXPSUM, I, LEXP, NBITS, TRY, UEXP
      REAL               OLDY, RECBAS, Y, Z
*     ..
*     .. External Functions ..
      REAL               SLAMC3
      EXTERNAL           SLAMC3
*     ..
*     .. Intrinsic Functions ..
      INTRINSIC          MOD
*     ..
*     .. Executable Statements ..
*
*     First compute LEXP and UEXP, two powers of 2 that bound
*     abs(EMIN). We then assume that EMAX + abs(EMIN) will sum
*     approximately to the bound that is closest to abs(EMIN).
*     (EMAX is the exponent of the required number RMAX).
*
      LEXP = 1
      EXBITS = 1
   10 CONTINUE
      TRY = LEXP*2
      IF( TRY.LE.( -EMIN ) ) THEN
         LEXP = TRY
         EXBITS = EXBITS + 1
         GO TO 10
      END IF
      IF( LEXP.EQ.-EMIN ) THEN
         UEXP = LEXP
      ELSE
         UEXP = TRY
         EXBITS = EXBITS + 1
      END IF
*
*     Now -LEXP is less than or equal to EMIN, and -UEXP is greater
*     than or equal to EMIN. EXBITS is the number of bits needed to
*     store the exponent.
*
      IF( ( UEXP+EMIN ).GT.( -LEXP-EMIN ) ) THEN
         EXPSUM = 2*LEXP
      ELSE
         EXPSUM = 2*UEXP
      END IF
*
*     EXPSUM is the exponent range, approximately equal to
*     EMAX - EMIN + 1 .
*
      EMAX = EXPSUM + EMIN - 1
      NBITS = 1 + EXBITS + P
*
*     NBITS is the total number of bits needed to store a
*     floating-point number.
*
      IF( ( MOD( NBITS, 2 ).EQ.1 ) .AND. ( BETA.EQ.2 ) ) THEN
*
*        Either there are an odd number of bits used to store a
*        floating-point number, which is unlikely, or some bits are
*        not used in the representation of numbers, which is possible,
*        (e.g. Cray machines) or the mantissa has an implicit bit,
*        (e.g. IEEE machines, Dec Vax machines), which is perhaps the
*        most likely. We have to assume the last alternative.
*        If this is true, then we need to reduce EMAX by one because
*        there must be some way of representing zero in an implicit-bit
*        system. On machines like Cray, we are reducing EMAX by one
*        unnecessarily.
*
         EMAX = EMAX - 1
      END IF
*
      IF( IEEE ) THEN
*
*        Assume we are on an IEEE machine which reserves one exponent
*        for infinity and NaN.
*
         EMAX = EMAX - 1
      END IF
*
*     Now create RMAX, the largest machine number, which should
*     be equal to (1.0 - BETA**(-P)) * BETA**EMAX .
*
*     First compute 1.0 - BETA**(-P), being careful that the
*     result is less than 1.0 .
*
      RECBAS = ONE / BETA
      Z = BETA - ONE
      Y = ZERO
      DO 20 I = 1, P
         Z = Z*RECBAS
         IF( Y.LT.ONE )
     $      OLDY = Y
         Y = SLAMC3( Y, Z )
   20 CONTINUE
      IF( Y.GE.ONE )
     $   Y = OLDY
*
*     Now multiply by BETA**EMAX to get RMAX.
*
      DO 30 I = 1, EMAX
         Y = SLAMC3( Y*BETA, ZERO )
   30 CONTINUE
*
      RMAX = Y
      RETURN
*
*     End of SLAMC5
*
      END
      LOGICAL          FUNCTION LSAME( CA, CB )
*
*  -- LAPACK auxiliary routine (version 2.0) --
*     Univ. of Tennessee, Univ. of California Berkeley, NAG Ltd.,
*     Courant Institute, Argonne National Lab, and Rice University
*     June 30, 1994
*
*     .. Scalar Arguments ..
      CHARACTER          CA, CB
*     ..
*
*  Purpose
*  =======
*
*  LSAME returns .TRUE. if CA is the same letter as CB regardless of
*  case.
*
*  Arguments
*  =========
*
*  CA      (input) CHARACTER*1
*  CB      (input) CHARACTER*1
*          CA and CB specify the single characters to be compared.
*
* =====================================================================
*
*     .. Intrinsic Functions ..
      INTRINSIC          ICHAR
*     ..
*     .. Local Scalars ..
      INTEGER            INTA, INTB, ZCODE
*     ..
*     .. Executable Statements ..
*
*     Test if the characters are equal
*
      LSAME = CA.EQ.CB
      IF( LSAME )
     $   RETURN
*
*     Now test for equivalence if both characters are alphabetic.
*
      ZCODE = ICHAR( 'Z' )
*
*     Use 'Z' rather than 'A' so that ASCII can be detected on Prime
*     machines, on which ICHAR returns a value with bit 8 set.
*     ICHAR('A') on Prime machines returns 193 which is the same as
*     ICHAR('A') on an EBCDIC machine.
*
      INTA = ICHAR( CA )
      INTB = ICHAR( CB )
*
      IF( ZCODE.EQ.90 .OR. ZCODE.EQ.122 ) THEN
*
*        ASCII is assumed - ZCODE is the ASCII code of either lower or
*        upper case 'Z'.
*
         IF( INTA.GE.97 .AND. INTA.LE.122 ) INTA = INTA - 32
         IF( INTB.GE.97 .AND. INTB.LE.122 ) INTB = INTB - 32
*
      ELSE IF( ZCODE.EQ.233 .OR. ZCODE.EQ.169 ) THEN
*
*        EBCDIC is assumed - ZCODE is the EBCDIC code of either lower or
*        upper case 'Z'.
*
         IF( INTA.GE.129 .AND. INTA.LE.137 .OR.
     $       INTA.GE.145 .AND. INTA.LE.153 .OR.
     $       INTA.GE.162 .AND. INTA.LE.169 ) INTA = INTA + 64
         IF( INTB.GE.129 .AND. INTB.LE.137 .OR.
     $       INTB.GE.145 .AND. INTB.LE.153 .OR.
     $       INTB.GE.162 .AND. INTB.LE.169 ) INTB = INTB + 64
*
      ELSE IF( ZCODE.EQ.218 .OR. ZCODE.EQ.250 ) THEN
*
*        ASCII is assumed, on Prime machines - ZCODE is the ASCII code
*        plus 128 of either lower or upper case 'Z'.
*
         IF( INTA.GE.225 .AND. INTA.LE.250 ) INTA = INTA - 32
         IF( INTB.GE.225 .AND. INTB.LE.250 ) INTB = INTB - 32
      END IF
      LSAME = INTA.EQ.INTB
*
*     RETURN
*
*     End of LSAME
*
      END
      DOUBLE PRECISION FUNCTION DLARND( IDIST, ISEED )
*
*  -- LAPACK auxiliary routine (version 2.0) --
*     Univ. of Tennessee, Univ. of California Berkeley, NAG Ltd.,
*     Courant Institute, Argonne National Lab, and Rice University
*     June 30, 1994
*
*     .. Scalar Arguments ..
      INTEGER            IDIST
*     ..
*     .. Array Arguments ..
      INTEGER            ISEED( 4 )
*     ..
*
*  Purpose
*  =======
*
*  DLARND returns a random real number from a uniform or normal
*  distribution.
*
*  Arguments
*  =========
*
*  IDIST   (input) INTEGER
*          Specifies the distribution of the random numbers:
*          = 1:  uniform (0,1)
*          = 2:  uniform (-1,1)
*          = 3:  normal (0,1)
*
*  ISEED   (input/output) INTEGER array, dimension (4)
*          On entry, the seed of the random number generator; the array
*          elements must be between 0 and 4095, and ISEED(4) must be
*          odd.
*          On exit, the seed is updated.
*
*  Further Details
*  ===============
*
*  This routine calls the auxiliary routine DLARAN to generate a random
*  real number from a uniform (0,1) distribution. The Box-Muller method
*  is used to transform numbers from a uniform to a normal distribution.
*
*  =====================================================================
*
*     .. Parameters ..
      DOUBLE PRECISION   ONE, TWO
      PARAMETER          ( ONE = 1.0D+0, TWO = 2.0D+0 )
      DOUBLE PRECISION   TWOPI
      PARAMETER          ( TWOPI = 6.2831853071795864769252867663D+0 )
*     ..
*     .. Local Scalars ..
      DOUBLE PRECISION   T1, T2
*     ..
*     .. External Functions ..
      DOUBLE PRECISION   DLARAN
      EXTERNAL           DLARAN
*     ..
*     .. Intrinsic Functions ..
      INTRINSIC          COS, LOG, SQRT
*     ..
*     .. Executable Statements ..
*
*     Generate a real random number from a uniform (0,1) distribution
*
      T1 = DLARAN( ISEED )
*
      IF( IDIST.EQ.1 ) THEN
*
*        uniform (0,1)
*
         DLARND = T1
      ELSE IF( IDIST.EQ.2 ) THEN
*
*        uniform (-1,1)
*
         DLARND = TWO*T1 - ONE
      ELSE IF( IDIST.EQ.3 ) THEN
*
*        normal (0,1)
*
         T2 = DLARAN( ISEED )
         DLARND = SQRT( -TWO*LOG( T1 ) )*COS( TWOPI*T2 )
      END IF
      RETURN
*
*     End of DLARND
*
      END
      DOUBLE COMPLEX   FUNCTION ZLARND( IDIST, ISEED )
*
*  -- LAPACK auxiliary routine (version 2.0) --
*     Univ. of Tennessee, Univ. of California Berkeley, NAG Ltd.,
*     Courant Institute, Argonne National Lab, and Rice University
*     June 30, 1994
*
*     .. Scalar Arguments ..
      INTEGER            IDIST
*     ..
*     .. Array Arguments ..
      INTEGER            ISEED( 4 )
*     ..
*
*  Purpose
*  =======
*
*  ZLARND returns a random complex number from a uniform or normal
*  distribution.
*
*  Arguments
*  =========
*
*  IDIST   (input) INTEGER
*          Specifies the distribution of the random numbers:
*          = 1:  real and imaginary parts each uniform (0,1)
*          = 2:  real and imaginary parts each uniform (-1,1)
*          = 3:  real and imaginary parts each normal (0,1)
*          = 4:  uniformly distributed on the disc abs(z) <= 1
*          = 5:  uniformly distributed on the circle abs(z) = 1
*
*  ISEED   (input/output) INTEGER array, dimension (4)
*          On entry, the seed of the random number generator; the array
*          elements must be between 0 and 4095, and ISEED(4) must be
*          odd.
*          On exit, the seed is updated.
*
*  Further Details
*  ===============
*
*  This routine calls the auxiliary routine DLARAN to generate a random
*  real number from a uniform (0,1) distribution. The Box-Muller method
*  is used to transform numbers from a uniform to a normal distribution.
*
*  =====================================================================
*
*     .. Parameters ..
      DOUBLE PRECISION   ZERO, ONE, TWO
      PARAMETER          ( ZERO = 0.0D+0, ONE = 1.0D+0, TWO = 2.0D+0 )
      DOUBLE PRECISION   TWOPI
      PARAMETER          ( TWOPI = 6.2831853071795864769252867663D+0 )
*     ..
*     .. Local Scalars ..
      DOUBLE PRECISION   T1, T2
*     ..
*     .. External Functions ..
      DOUBLE PRECISION   DLARAN
      EXTERNAL           DLARAN
*     ..
*     .. Intrinsic Functions ..
      INTRINSIC          DCMPLX, EXP, LOG, SQRT
*     ..
*     .. Executable Statements ..
*
*     Generate a pair of real random numbers from a uniform (0,1)
*     distribution
*
      T1 = DLARAN( ISEED )
      T2 = DLARAN( ISEED )
*
      IF( IDIST.EQ.1 ) THEN
*
*        real and imaginary parts each uniform (0,1)
*
         ZLARND = DCMPLX( T1, T2 )
      ELSE IF( IDIST.EQ.2 ) THEN
*
*        real and imaginary parts each uniform (-1,1)
*
         ZLARND = DCMPLX( TWO*T1-ONE, TWO*T2-ONE )
      ELSE IF( IDIST.EQ.3 ) THEN
*
*        real and imaginary parts each normal (0,1)
*
         ZLARND = SQRT( -TWO*LOG( T1 ) )*EXP( DCMPLX( ZERO, TWOPI*T2 ) )
      ELSE IF( IDIST.EQ.4 ) THEN
*
*        uniform distribution on the unit disc abs(z) <= 1
*
         ZLARND = SQRT( T1 )*EXP( DCMPLX( ZERO, TWOPI*T2 ) )
      ELSE IF( IDIST.EQ.5 ) THEN
*
*        uniform distribution on the unit circle abs(z) = 1
*
         ZLARND = EXP( DCMPLX( ZERO, TWOPI*T2 ) )
      END IF
      RETURN
*
*     End of ZLARND
*
      END
      DOUBLE PRECISION FUNCTION DLARAN( ISEED )
*
*  -- LAPACK auxiliary routine (version 2.0) --
*     Univ. of Tennessee, Univ. of California Berkeley, NAG Ltd.,
*     Courant Institute, Argonne National Lab, and Rice University
*     February 29, 1992
*
*     .. Array Arguments ..
      INTEGER            ISEED( 4 )
*     ..
*
*  Purpose
*  =======
*
*  DLARAN returns a random real number from a uniform (0,1)
*  distribution.
*
*  Arguments
*  =========
*
*  ISEED   (input/output) INTEGER array, dimension (4)
*          On entry, the seed of the random number generator; the array
*          elements must be between 0 and 4095, and ISEED(4) must be
*          odd.
*          On exit, the seed is updated.
*
*  Further Details
*  ===============
*
*  This routine uses a multiplicative congruential method with modulus
*  2**48 and multiplier 33952834046453 (see G.S.Fishman,
*  'Multiplicative congruential random number generators with modulus
*  2**b: an exhaustive analysis for b = 32 and a partial analysis for
*  b = 48', Math. Comp. 189, pp 331-344, 1990).
*
*  48-bit integers are stored in 4 integer array elements with 12 bits
*  per element. Hence the routine is portable across machines with
*  integers of 32 bits or more.
*
*  =====================================================================
*
*     .. Parameters ..
      INTEGER            M1, M2, M3, M4
      PARAMETER          ( M1 = 494, M2 = 322, M3 = 2508, M4 = 2549 )
      DOUBLE PRECISION   ONE
      PARAMETER          ( ONE = 1.0D+0 )
      INTEGER            IPW2
      DOUBLE PRECISION   R
      PARAMETER          ( IPW2 = 4096, R = ONE / IPW2 )
*     ..
*     .. Local Scalars ..
      INTEGER            IT1, IT2, IT3, IT4
*     ..
*     .. Intrinsic Functions ..
      INTRINSIC          DBLE, MOD
*     ..
*     .. Executable Statements ..
*
*     multiply the seed by the multiplier modulo 2**48
*
      IT4 = ISEED( 4 )*M4
      IT3 = IT4 / IPW2
      IT4 = IT4 - IPW2*IT3
      IT3 = IT3 + ISEED( 3 )*M4 + ISEED( 4 )*M3
      IT2 = IT3 / IPW2
      IT3 = IT3 - IPW2*IT2
      IT2 = IT2 + ISEED( 2 )*M4 + ISEED( 3 )*M3 + ISEED( 4 )*M2
      IT1 = IT2 / IPW2
      IT2 = IT2 - IPW2*IT1
      IT1 = IT1 + ISEED( 1 )*M4 + ISEED( 2 )*M3 + ISEED( 3 )*M2 +
     $      ISEED( 4 )*M1
      IT1 = MOD( IT1, IPW2 )
*
*     return updated seed
*
      ISEED( 1 ) = IT1
      ISEED( 2 ) = IT2
      ISEED( 3 ) = IT3
      ISEED( 4 ) = IT4
*
*     convert 48-bit integer to a real number in the interval (0,1)
*
      DLARAN = R*( DBLE( IT1 )+R*( DBLE( IT2 )+R*( DBLE( IT3 )+R*
     $         ( DBLE( IT4 ) ) ) ) )
      RETURN
*
*     End of DLARAN
*
      END