'\"
'\" Copyright 1998 by Bell Labs Innovations for Lucent Technologies.
'\"
'\" Permission to use, copy, modify, and distribute this software and its
'\" documentation for any purpose and without fee is hereby granted, provided
'\" that the above copyright notice appear in all copies and that both that the
'\" copyright notice and warranty disclaimer appear in supporting documentation,
'\" and that the names of Lucent Technologies any of their entities not be used
'\" in advertising or publicity pertaining to distribution of the software
'\" without specific, written prior permission.
'\"
'\" Lucent Technologies disclaims all warranties with regard to this software,
'\" including all implied warranties of merchantability and fitness.  In no event
'\" shall Lucent Technologies be liable for any special, indirect or
'\" consequential damages or any damages whatsoever resulting from loss of use,
'\" data or profits, whether in an action of contract, negligence or other
'\" tortuous action, arising out of or in connection with the use or performance
'\" of this software.  
'\"
'\" Container widget created by George Howlett.
'\"
.so man.macros.in
.TH container n BLT_VERSION BLT "BLT Built-In Commands"
.BS
'\" Note:  do not modify the .SH NAME line immediately below!
.SH NAME
container \- Widget to contain a foreign window.
.BE
.SH SYNOPSIS
\fBcontainer\fR \fIpathName \fR?\fIoptions\fR?
.SH DESCRIPTION
The \fBcontainer\fR widget lets you swallow another X11/Win32 toplevel or
embed an X11 window from a foreign
application into your Tk application.  The foreign window is
reparented inside of the widget. You can then place and arrange the
container just as you would any Tk widget.
.SH INTRODUCTION
Notebooks are a popular graphical paradigm.  They allow you to organize
many windows in a single widget.  For example, you might have an
application the displays several X-Y graphs at the same time.
Typically, you can't pack the graphs into the same \fBframe\fR because
they are too large.  The other alternative is to pack the graphs into
several \fBtoplevel\fR widgets, allowing them to overlap on the
screen.  The problem is that all the different toplevel windows
clutter the screen and are difficult to manage.
.PP
The \fBcontainer\fR widget lets organize your application by displaying
each graph as a page in a folder of a notebook.  Only one page is
visible at a time. When you click on a tab, the folder (graph)
corresponding to the tab is displayed in the \fBcontainer\fR widget.  The
container also lets you temporarily tear pages out of the notebook into a
separate toplevel widget, and put them back in the container later.  For
example, you could compare two graphs side-by-side by tearing them
out, and then replace them when you are finished.
.PP
A container may contain an unlimited number of folders.  If there are too
many tabs to view, you can arrange them as multiple tiers or scroll
the tabs. The container uses the conventional Tk scrollbar syntax, so you
can attach a scrollbar too. 
.SH EXAMPLE
You create a container widget with the \fBcontainer\fR command.
.CS
# Create a new container
container .c
.CE
A new Tcl command \fB.c\fR is also created.  This command can be
used to query and modify the container.  For example, to change the
default borderwidth, you use the new command and
the container's \fBconfigure\fR operation.
.CS
# Change the default font.
\&.c configure \-borderwidth 2
.CE
You can then add folders using the \fBinsert\fR operation.
.CS
# Create a new folder "f1"
\&.c coinsert 0 "f1"
.CE
This inserts the new tab named "f1" into the container.  The index
\fB0\fR indicates location to insert the new tab.  You can also use
the index \fBend\fR to append a tab to the end of the container.  By
default, the text of the tab is the name of the tab.  You can change
this by configuring the \fB\-text\fR option.
.CS
# Change the label of "f1"
\&.ts tab configure "f1" -label "Tab #1" 
.CE
The \fBinsert\fR operation lets you add one or more folders at a time.
.CS
\&.ts insert end "f2" -label "Tab #2" "f3" "f4" 
.CE
The tab on each folder contains a label.  A label may display both
an image and a text string.  You can reconfigure the tab's attributes
(foreground/background colors, font, rotation, etc) using the \fBtab
configure\fR operation.
.CS
# Add an image to the label of "f1"
set image [image create photo -file stopsign.gif]
\&.ts tab configure "f1" -image $image
\&.ts tab configure "f2" -rotate 90
.CE
Each folder may contain an embedded widget to represent its contents.
The widget to be embedded must be a child of the container widget.  Using
the \fB\-window\fR option, you specify the name of widget to be
embedded.  But don't pack the widget, the container takes care of placing
and arranging the widget for you.
.CS
graph .ts.graph
\&.ts tab configure "f1" -window ".ts.graph" \\
    -fill both -padx 0.25i -pady 0.25i
.CE
The size of the folder is determined the sizes of the Tk widgets
embedded inside each folder.  The folder will be as wide as the widest
widget in any folder. The tallest determines the height.  You can use
the tab's \fB\-pagewidth\fR and \fB\-pageheight\fR options override this.
.PP
Other options control how the widget appears in the folder.  The
\fB\-fill\fR option says that you wish to have the widget stretch to
fill the available space in the folder.
.CS
\&.ts tab configure "f1" -fill both -padx 0.25i -pady 0.25i
.CE
.PP
Now when you click the left mouse button on "f1", the
graph will be displayed in the folder.  It will be automatically
hidden when another folder is selected.  If you click on the right
mouse button, the embedded widget will be moved into a toplevel widget 
of its own.  Clicking again on the right mouse button puts it back into 
the folder.
.PP
If you want to share a page between two different folders, the
\fB\-command\fR option lets you specify a Tcl command to be invoked
whenever the folder is selected.  You can reset the \fB\-window\fR
option for the tab whenever it's clicked.
.CS
\&.ts tab configure "f2" -command { 
    \&.ts tab configure "f2" -window ".ts.graph"
}
\&.ts tab configure "f1" -command { 
    \&.ts tab configure "f1" -window ".ts.graph"
}
.CE
If you have many folders, you may wish to stack tabs in multiple
tiers.  The container's \fB\-tiers\fR option requests a maximum
number of tiers.   The default is one tier.  
.CS
\&.ts configure -tiers 2
.CE
If the tabs can fit in less tiers, the widget will use that many.  
Whenever there are more tabs than can be displayed in the maximum number
of tiers, the container will automatically let you scroll the tabs.  You
can even attach a scrollbar to the container.
.CS
\&.ts configure -scrollcommand { .sbar set }  -scrollincrement 20
\&.sbar configure -orient horizontal -command { .ts view }
.CE
By default tabs are along the top of the container from left to right.  
But tabs can be placed on any side of the container using the \fB\-side\fR
option.
.CS
# Arrange tabs along the right side of the container. 
\&.ts configure -side right -rotate 270
.CE
.SH SYNTAX
The \fBcontainer\fR command creates a new window using the \fIpathName\fR
argument and makes it into a container widget.
.CS
\fBcontainer \fIpathName \fR?\fIoption value\fR?...
.CE
Additional options may be specified on the command line or in the
option database to configure aspects of the container such as its colors,
font, text, and relief.  The \fBcontainer\fR command returns its
\fIpathName\fR argument.  At the time this command is invoked, there
must not exist a window named \fIpathName\fR, but \fIpathName\fR's
parent must exist.
.PP
When first created, a new container contains no tabs.  Tabs are added or
deleted using widget operations described below. It is not necessary
for all the tabs to be displayed in the container window at once;
commands described below may be used to change the view in the window.
Containers allow scrolling of tabs using the \fB\-scrollcommand\fR
option.  They also support scanning (see the \fBscan\fR operation).
Tabs may be arranged along any side of the container window using the
\fB\-side\fR option.
.PP
The size of the container window is determined the number of tiers of
tabs and the sizes of the Tk widgets embedded inside each folder.
The widest widget determines the width of the folder. The tallest
determines the height.  If no folders contain an embedded widget, the
size is determined solely by the size of the tabs.
.PP
You can override either dimension with the container's \fB\-width\fR
and \fB\-height\fR options.
.SH "CONTAINER OPERATIONS"
All \fBcontainer\fR operations are invoked by specifying the widget's
pathname, the operation, and any arguments that pertain to that
operation.  The general form is:
.sp
.CS
	\fIpathName operation \fR?\fIarg arg ...\fR?
.CE
.sp
\fIOperation\fR and the \fIarg\fRs determine the exact behavior of the
command.  The following operations are available for container widgets:
.TP
\fIpathName \fBcget\fR \fIoption\fR
Returns the current value of the configuration option given
by \fIoption\fR.
\fIOption\fR may have any of the values accepted by the \fBconfigure\fR
operation described below.
.TP
\fIpathName \fBconfigure\fR ?\fIoption\fR? ?\fIvalue option value ...\fR?
Query or modify the configuration options of the widget.
If no \fIoption\fR is specified, returns a list describing all 
the available options for \fIpathName\fR (see \fBTk_ConfigureInfo\fR for
information on the format of this list).  If \fIoption\fR is specified
with no \fIvalue\fR, then the command returns a list describing the
one named option (this list will be identical to the corresponding
sublist of the value returned if no \fIoption\fR is specified).  If
one or more \fIoption\-value\fR pairs are specified, then the command
modifies the given widget option(s) to have the given value(s);  in
this case the command returns an empty string.
\fIOption\fR and \fIvalue\fR are described below:
.RS
.TP
\fB\-background \fIcolor\fR
Sets the border color of the container.  
.TP
\fB\-borderwidth \fIpixels\fR
Sets the width of the 3\-D border around the outside edge of the widget.  The
\fB\-relief\fR option determines how the border is to be drawn.  The
default is \fB2\fR.
.TP
\fB\-command \fIpattern\fR
Specifies to search for a window whose \fBWM_COMMAND\fR property matches
the given pattern (X11 only).  If no windows, or more than one window, matches
the pattern, an error is generated.  If \fIpattern\fR is the empty
string, then no command search is performed.
The default is \fB""\fR.
.TP
\fB\-cursor \fIcursor\fR
Specifies the widget's cursor.  The default cursor is \fB""\fR.
.TP
\fB\-height \fIpixels\fR
Specifies the requested height of widget.  If \fIpixels\fR is
0, then the height is height the embedded window plus the specified 
borderwidth. The default is \fB0\fR.
.TP 
\fB\-highlightbackground  \fIcolor\fR
Sets the color to display in the traversal highlight region when
the container does not have the input focus.  
.TP 
\fB\-highlightcolor \fIcolor\fR
Sets the color to use for the traversal highlight rectangle that is
drawn around the widget when it has the input focus. 
The default is \fBblack\fR.
.TP 
\fB\-highlightthickness \fIpixels\fR
Sets the width of the highlight rectangle to draw around the outside of 
the widget when it has the input focus. \fIPixels\fR is a non-negative 
value and may have any of the forms acceptable to \fBTk_GetPixels\fR.
If the value is zero, no focus highlight is drawn around the widget.
The default is \fB2\fR.
.TP
\fB\-name \fIpattern\fR
Specifies to search for a window whose \fBWM_NAME\fR property matches
the given pattern (X11 only).  If no windows, or more than one window, matches
the pattern, an error is generated.  If \fIpattern\fR is the empty
string, then no name search is performed.
The default is \fB""\fR.
.TP
\fB\-relief \fIrelief\fR
Specifies the 3-D effect for the container widget.  \fIRelief\fR
specifies how the container should appear relative to widget that
it is packed into; for example, \fBraised\fR means the container should
appear to protrude.  The default is \fBsunken\fR.
.TP
\fB\-takefocus\fR \fIfocus\fR 
Provides information used when moving the focus from window to window
via keyboard traversal (e.g., Tab and Shift-Tab).  If \fIfocus\fR is
\fB0\fR, this means that this window should be skipped entirely during
keyboard traversal.  \fB1\fR means that the this window should always
receive the input focus.  An empty value means that the traversal
scripts decide whether to focus on the window.
The default is \fB1\fR.
.TP
\fB\-width \fIpixels\fR 
Specifies the requested width of the widget.  If \fIpixels\fR is 0,
then the width is the width the embedded window and the specified
borderwidth.  The default is \fB0\fR.
.TP
\fB\-window \fIid\fR
Specifies the foreign embedded using its path or X window id.  
.RE
.TP
\fIpathName \fBfind \fB\-command\fR|\fB\-name\fR \fIpattern\fR
Searches for all windows that match the given pattern.  If the
\fB\-command\fR switch is given, all windows whose \fCWWM_COMMAND\fR
property match \fIpattern\fR are returned in a list (X11 only).  If the
\fB\-name\fR switch is given, all windows whose \fCWWM_NAME\fR
property match \fIpattern\fR are returned in a list.  The list
returned will contains pairs of the window id and the matching property.
.SH KEYWORDS
container, widget