.\"Document Author:  Timothy R. Butler   -   tbutler@uninetsolutions.com"
.TH bochsrc 5 "22 Jun 2006" "bochsrc" "The Bochs Project"
.\"SKIP_SECTION"
.SH NAME
bochsrc \- Configuration file for Bochs.
.\"SKIP_SECTION"
.SH DESCRIPTION
.LP
Bochsrc   is  the   configuration   file  that specifies
where  Bochs should look for disk images,  how the Bochs
emulation layer  should  work,  etc.   The  syntax  used
for bochsrc  can also be used as command line  arguments
for Bochs. The .bochsrc  file should be placed either in
the current  directory  before running  Bochs or in your
home directory.

Starting with Bochs 1.3, you can use environment variables in
the bochsrc file, for example: 

  floppya: 1_44="$IMAGES/bootdisk.img", status=inserted

Starting with version 2.0, two environment variables have a built-in
default value which is set at compile time.  $BXSHARE points to the
"share" directory which is typically /usr/local/share/bochs on UNIX
machines.  See the $(sharedir) variable in the Makefile for the exact
value.  $BXSHARE is used by disk images to locate the directory where 
the BIOS images and keymaps can be found.  If $BXSHARE is not defined, Bochs
will supply the default value.  Also, $LTDL_LIBRARY_PATH points to a list of
directories (separated by colons if more than one) to search in for Bochs
plugins.  A compile-time default is provided if this variable is not defined
by the user.
.\".\"DONT_SPLIT"
.SH OPTIONS

.TP
.I "#include"
This option includes another configuration file. It is
possible to put installation defaults in a global config
file (e.g. location of rom images).

Example:
  #include /etc/bochsrc

.TP
.I "config_interface:"
The configuration interface is a series of menus or dialog boxes that
allows you to change all the settings that control Bochs's behavior.
There are two choices of configuration interface: a text mode version
called "textconfig" and a graphical version called "wx".  The text
mode version uses stdin/stdout and is always compiled in.  The graphical
version is only available when you use "--with-wx" on the configure 
command.  If you do not write a config_interface line, Bochs will 
choose a default for you.

.B NOTE:
if you use the "wx" configuration interface, you must also use
the "wx" display library.

Example:
  config_interface: textconfig

.TP
.I "display_library:"
The display library is the code that displays the Bochs VGA screen.  Bochs 
has a selection of about 10 different display library implementations for 
different platforms.  If you run configure with multiple --with-* options, 
the display_library command lets you choose which one you want to run with.
If you do not write a display_library line, Bochs will choose a default for
you.

The choices are: 
  x           X windows interface, cross platform
  win32       native win32 libraries
  carbon      Carbon library (for MacOS X)
  beos        native BeOS libraries
  macintosh   MacOS pre-10
  amigaos     native AmigaOS libraries
  sdl         SDL library, cross platform
  term        text only, uses curses/ncurses library, cross platform
  rfb         provides an interface to AT&T's VNC viewer, cross platform
  wx          wxWidgets library, cross platform
  nogui       no display at all

.B NOTE:
if you use the "wx" configuration interface, you must also use
the "wx" display library.

Example:
  display_library: x

.TP
.I "romimage:"
The ROM BIOS controls what the PC does when it first powers on.  Normally, you
can use a precompiled BIOS in the source or binary distribution called
.B BIOS-bochs-latest.
The ROM BIOS is usually loaded starting at address 0xf0000, and it is exactly 64k long.
You can also use the environment variable $BXSHARE to specify the location of the BIOS.
The usage of external large BIOS images (up to 512k) at memory top is
now supported, but we still recommend to use the BIOS distributed with Bochs.
Now the start address can be calculated from image size.

Examples:
  romimage: file=bios/BIOS-bochs-latest, address=0xf0000
  romimage: file=$BXSHARE/BIOS-bochs-latest, address=0xf0000
  romimage: file=mybios.bin, address=0xfff80000
  romimage: file=mybios.bin

.TP
.I "cpu:"
This defines cpu-related parameters inside Bochs:

count:

Set the number of processors:cores per processor:threads per core when
Bochs is compiled for SMP emulation. Bochs currently supports up to
8 processors. If Bochs is compiled without SMP support, it won't accept
values different from 1.

quantum:

Maximum amount of instructions allowed to execute by processor before
returning control to another cpu. This option exists only in Bochs 
binary compiled with SMP support.

reset_on_triple_fault:

Reset the CPU when triple fault occur (highly recommended) rather than
PANIC. Remember that if you trying to continue after triple fault the 
simulation will be completely bogus !

ips:

Emulated Instructions Per Second.  This is the
number of IPS that Bochs is capable of running
on your machine.  You can recompile Bochs with
--enable-show-ips option enabled, to find your
workstation's capability.  Measured IPS value
will then be logged into your log file or status
bar (if supported by the gui).

IPS is used to calibrate  many  time-dependent
events   within   the  bochs  simulation.  For
example, changing IPS affects the frequency of
VGA updates, the duration of time before a key
starts to autorepeat,  and the measurement  of
BogoMips and other benchmarks.

Example Specifications[1]
 Bochs Machine/Compiler                                Mips
 -------------------------------------------------------------------
 2.2.6 2.6Ghz Intel Core 2 Duo with WinXP/g++ 3.4      21 to 25 Mips
 2.2.6 2.1Ghz Athlon XP with Linux 2.6/g++ 3.4         12 to 15 Mips
 2.0.1 1.6Ghz Intel P4 with Win2000/g++ 3.3             5 to  7 Mips
 1.4   650Mhz Athlon K-7 with Linux 2.4.4/egcs-2.91.66  2 to  2.5 Mips
 1.4   400Mhz Pentium II with Linux 2.0.36/egcs-1.0.3   1 to  1.8 Mips

 [1]  IPS measurements depend on OS and compiler
configuration  in addition  to processor clock
speed.

Example:
  cpu: count=2, ips=10000000

.TP
.I "megs:"
Set the number of Megabytes of physical memory you want to emulate. 
The default is 32MB, most OS's won't need more than that.
The maximum amount of memory supported is 2048Mb.

Example:
  megs: 32

.TP
.I "optromimage1: \fP, \fIoptromimage2: \fP, \fIoptromimage3: \fPor \fIoptromimage4:"
You may now load up to 4 optional ROM images. Be sure to use a
read-only area, typically between C8000 and EFFFF. These optional
ROM images should not overwrite the rombios (located at
F0000-FFFFF) and the videobios (located at C0000-C7FFF).
Those ROM images will be initialized by the bios if they contain
the right signature (0x55AA).
It can also be a convenient way to upload some arbitrary code/data
in the simulation, that can be retrieved by the boot loader

Example:
  optromimage1: file=optionalrom.bin, address=0xd0000

.TP
.I "vgaromimage:"
You also need to load a VGA ROM BIOS into 0xC0000.

Examples:
  vgaromimage: file=bios/VGABIOS-elpin-2.40
  vgaromimage: file=bios/VGABIOS-lgpl-latest
  vgaromimage: file=$BXSHARE/VGABIOS-lgpl-latest

.TP
.I "vga:"
Here you can specify the display extension to be used. With the value 'none'
you can use standard VGA with no extension. Other supported values are 'vbe'
for Bochs VBE and 'cirrus' for Cirrus SVGA support.

Examples:
  vga: extension=cirrus
  vga: extension=vbe

.TP
.I "floppya: \fPor \fIfloppyb:"

Point  this to  the pathname of a floppy image
file or  device.  Floppya is the  first drive,
and  floppyb is the  second drive.  If  you're
booting from a floppy, floppya should point to
a bootable disk.

You can set the initial status of the media to
\&'ejected' or 'inserted'. Usually you will want
to use 'inserted'.

Example:

2.88M 3.5" Floppy:
  floppya: 2_88=path, status=ejected

1.44M 3.5" Floppy:
  floppya: 1_44=path, status=inserted

1.2M  5.25" Floppy:
  floppyb: 1_2=path, status=ejected

720K  3.5" Floppy:
  floppya: 720k=path, status=inserted

360K  5.25" Floppy:
  floppya: 360k=path, status=inserted

Autodetect Floppy type:
  floppya: image=path, status=inserted

.TP
.I "ata0: \fP, \fIata1: \fP, \fIata2: \fPor \fIata3:"

These options enables up to 4 ata channels. For each channel
the two base io addresses and the irq must be specified.
ata0 and ata1 are enabled by default, with the values shown below.

Examples:
   ata0: enabled=1, ioaddr1=0x1f0, ioaddr2=0x3f0, irq=14
   ata1: enabled=1, ioaddr1=0x170, ioaddr2=0x370, irq=15
   ata2: enabled=1, ioaddr1=0x1e8, ioaddr2=0x3e0, irq=11
   ata3: enabled=1, ioaddr1=0x168, ioaddr2=0x360, irq=9

.TP
.I "ata\fR[\fB0-3\fR]\fI-master: \fPor \fIata\fR[\fB0-3\fR]\fI-slave:"

This defines the type and characteristics of all attached ata devices:
   type=       type of attached device [disk|cdrom] 
   path=       path of the image
   mode=       image mode [flat|concat|external|dll|sparse|vmware3|undoable|growing|volatile], only valid for disks
   cylinders=  only valid for disks
   heads=      only valid for disks
   spt=        only valid for disks
   status=     only valid for cdroms [inserted|ejected]
   biosdetect= type of biosdetection [none|auto], only for disks on ata0 [cmos]
   translation=type of translation of the bios, only for disks [none|lba|large|rechs|auto]
   model=      string returned by identify device command
   journal=    optional filename of the redolog for undoable and volatile disks
   
Point this at a hard disk image file, cdrom iso file,
or a physical cdrom device.  
To create a hard disk image, try running bximage.  
It will help you choose the size and then suggest a line that 
works with it.

In UNIX it is possible to use a raw device as a Bochs hard disk, 
but WE DON'T RECOMMEND IT.

The path is always mandatory. Disk geometry autodetection works with images
created by bximage if CHS is set to 0/0/0 (cylinders are calculated using
heads=16 and spt=63). For other hard disk images and modes the cylinders,
heads, and spt are mandatory.

The mode option defines how the disk image is handled. Disks can be defined as:
  - flat : one file flat layout
  - concat : multiple files layout
  - external : developer's specific, through a C++ class
  - dll : developer's specific, through a DLL
  - sparse : stackable, commitable, rollbackable 
  - vmware3 : vmware3 disk support
  - undoable : flat file with commitable redolog
  - growing : growing file
  - volatile : flat file with volatile redolog

The disk translation scheme (implemented in legacy int13 bios functions, and used by
older operating systems like MS-DOS), can be defined as:
  - none : no translation, for disks up to 528MB (1032192 sectors)
  - large : a standard bitshift algorithm, for disks up to 4.2GB (8257536 sectors)
  - rechs : a revised bitshift algorithm, using a 15 heads fake physical geometry, for disks up to 7.9GB (15482880 sectors). (don't use this unless you understand what you're doing)
  - lba : a standard lba-assisted algorithm, for disks up to 8.4GB (16450560 sectors)
  - auto : autoselection of best translation scheme. (it should be changed if system does not boot)

Default values are:
   mode=flat, biosdetect=auto, translation=auto, model="Generic 1234"

The biosdetect option has currently no effect on the bios

Examples:
   ata0-master: type=disk, path=10M.sample, cylinders=306, heads=4, spt=17
   ata0-slave:  type=disk, path=20M.sample, cylinders=615, heads=4, spt=17
   ata1-master: type=disk, path=30M.sample, cylinders=615, heads=6, spt=17
   ata1-slave:  type=disk, path=46M.sample, cylinders=940, heads=6, spt=17
   ata2-master: type=disk, path=62M.sample, cylinders=940, heads=8, spt=17
   ata2-slave:  type=disk, path=112M.sample, cylinders=900, heads=15, spt=17
   ata3-master: type=disk, path=483M.sample, cylinders=1024, heads=15, spt=63
   ata3-slave:  type=cdrom, path=iso.sample, status=inserted

.TP
.I "com1: \fP, \fIcom2: \fP, \fIcom3: \fPor \fIcom4:"
This defines a serial port (UART type 16550A). In the 'term' you can specify
a device to use as com1. This can be a real serial line, or a pty.  To use
a pty (under X/Unix), create two windows (xterms, usually).  One of them will
run bochs, and the other will act as com1. Find out the tty the com1 window
using the `tty' command, and use that as the `dev' parameter.  Then do
`sleep 1000000' in the com1 window to keep the shell from messing with things,
and run bochs in the other window.  Serial I/O to com1 (port 0x3f8) will all
go to the other window.

Other serial modes are 'null' (no input/output), 'file' (output to a file
specified as the 'dev' parameter), 'raw' (use the real serial port - under
construction for win32) and 'mouse' (standard serial mouse - requires
mouse option setting 'type=serial' or 'type=serial_wheel')

Examples:
  com1: enabled=term, dev=/dev/ttyp7
  com2: enabled=1, mode=file, dev=serial.out
  com1: enabled=1, mode=mouse

.TP
.I "parport1: \fPor \fIparport2:"
This defines a parallel (printer) port. When turned on and an output file is
defined the emulated printer port sends characters printed by the guest
OS into the output file. On some platforms a device filename can be used to
send the data to the real parallel port (e.g. "/dev/lp0" on Linux).

Examples:
  parport1: enabled=1, file=parport.out
  parport2: enabled=1, file="/dev/lp0"
  parport1: enabled=0

.TP
.I "boot:"
This defines the boot sequence. Now you can specify up to 3 boot drives.
You can either boot from 'floppy', 'disk' or 'cdrom'
(legacy 'a' and 'c' are also supported)

Example:
  boot: cdrom, floppy, disk

.TP
.I "floppy_bootsig_check:"
This disables the 0xaa55 signature check on boot floppies
The check is enabled by default.

Example:
  floppy_bootsig_check: disabled=1

.TP
.I "log:"
Give the path of the log file you'd like Bochs
debug and misc. verbiage to be written to.   If
you really don't want it, make it /dev/null.

Example:
  log: bochs.out
  log: /dev/tty               (unix only)
  log: /dev/null              (unix only)

.TP
.I "logprefix:"
This handles the format of the string prepended to each log line :
You may use those special tokens :
  %t : 11 decimal digits timer tick
  %i : 8 hexadecimal digits of cpu0 current eip
  %e : 1 character event type ('i'nfo, 'd'ebug, 'p'anic, 'e'rror)
  %d : 5 characters string of the device, between brackets
 
Default : %t%e%d

Examples:
  logprefix: %t-%e-@%i-%d
  logprefix: %i%e%d

.TP
.I "panic:"
If Bochs reaches  a condition  where it cannot
emulate correctly, it does a panic.  This  can
be a configuration problem  (like a misspelled
bochsrc line) or an emulation problem (like an
unsupported video mode). The  "panic"  setting
in  bochsrc  tells  Bochs  how to respond to a
panic.  You  can  set this to fatal (terminate
the session),  report   (print information  to
the console), or ignore (do nothing).

The safest setting is action=fatal. If you are
getting  panics,  you  can  try  action=report
instead.  If you allow Bochs to continue after
a panic, don't be surprised if you get strange
behavior or crashes if a panic occurs.  Please
report  panic  messages  unless  it is just  a
configuration  problem  like  "could  not find
hard drive image."

Example:
  panic: action=fatal


.TP
.I "error:"
Bochs produces an error message when it  finds
a condition that really shouldn't happen,  but
doesn't endanger the simulation. An example of
an error  might be  if the  emulated  software
produces an illegal disk command.

The "error" setting tells Bochs how to respond
to an error condition.   You can set  this  to
fatal  (terminate the session),  report (print
information to the  console),  or  ignore  (do
nothing).

Example:
  error: action=report

.TP
.I "info:"
This setting tells Bochs what to  do  when  an
event  occurs   that  generates  informational
messages.  You can  set this  to  fatal  (that
would not be very smart though), report (print
information to the  console),  or  ignore  (do
nothing).   For  general  usage,  the "report"
option is probably a good choice.

Example:
  info: action=report

.TP
.I "debug:"
This  setting  tells  Bochs what  to  do  with
messages intended to assist in debugging.  You
can set  this  to  fatal  (but you shouldn't),
report (print information to the  console), or
ignore (do nothing). You should generally  set
this  to  ignore,  unless  you are  trying  to
diagnose a particular problem.

.B NOTE: 
When  action=report,   Bochs   may  spit  out
thousands of debug messages per second, which
can impact performance and fill up your disk.

Example:
  debug: action=ignore

.TP
.I "debugger_log:"
Give the path of the log file you'd like Bochs to log debugger output.
If you really don't want it, make it '/dev/null', or '-'.

Example:
  log: debugger.out
  log: /dev/null              (unix only)
  log: -

.TP
.I "sb16:"
This  defines the SB16 sound emulation. It can
have several of the  following properties. All
properties are in this format:
  sb16: property=value


.B PROPERTIES FOR sb16:

midi:

The  filename is where the midi data is  sent.
This can  be  a device  or just a file if  you
want to record the midi data.

midimode:

 0 = No data should be output.
 1 = output to device (system dependent - midi
 denotes the device driver).
 2 = SMF file output, including headers.
 3 = Output  the midi  data stream to the file
 (no  midi headers  and  no delta  times, just
 command and data bytes).

wave:

This  is the device/file where wave  output is
stored.

wavemode:

 0 = no data
 1 = output to device (system dependent - wave
 denotes the device driver).
 2 = VOC file output, including headers.
 3 = Output the raw wave stream to the file.

log:

The file to write the sb16 emulator messages to.

loglevel:

 0 = No log.
 1 = Resource changes, midi program and bank changes.
 2 = Severe errors.
 3 = All errors.
 4 = All errors plus all port accesses.
 5 = All  errors and port  accesses plus a lot
 of extra information.

It is possible to change the loglevel at runtime.

dmatimer:

Microseconds per second for a DMA cycle.  Make it smaller
to fix non-continuous sound.  750000 is  usually  a  good
value.  This  needs  a reasonably  correct   setting  for
the  IPS  parameter of the CPU option.  It is possible to
adjust the dmatimer at runtime.

Example:
  sb16: midimode=1, midi=/dev/midi00,
  wavemode=1, wave=/dev/dsp, loglevel=2,
  log=sb16.log, dmatimer=600000

.B NOTE:
The  example is  wrapped onto three  lines for
formatting  reasons, but  it should all be  on
one line in the actual bochsrc file.

.TP
.I "vga_update_interval:"
Video memory is scanned for updates and screen updated
every so many virtual seconds. The default value is
40000, about 25Hz. Keep in mind that you  must tweak
the 'cpu: ips=N' directive to be as close  to the number of
emulated instructions-per-second your  workstation can
do, for this to be accurate.

Example:
  vga_update_interval: 250000


.TP
.I "keyboard_serial_delay:"
Approximate time in microseconds that it takes
one  character  to   be  transfered  from  the
keyboard to controller over the serial path.

Example:
  keyboard_serial_delay: 200

.TP
.I "keyboard_paste_delay:"
Approximate time in microseconds between attempts to paste
characters to the keyboard controller. This leaves time for the
guest os to deal with the flow of characters.  The ideal setting
depends on how your operating system processes characters.  The
default of 100000 usec (.1 seconds) was chosen because it works 
consistently in Windows.

If your OS is losing characters during a paste, increase the paste
delay until it stops losing characters.

Example:
  keyboard_paste_delay: 100000

.TP
.I "ips:"
Emulated Instructions Per Second.  This option is deprecated.
Use the CPU paramter IPS instead (cpu: ips=N).

.TP
.I "clock:"
This defines the parameters of the clock inside Bochs.

sync

TO BE COMPLETED (see Greg explanation in feature request #536329)

time0

Specifies the start (boot) time of the virtual machine. Use a time 
value as returned by the time(2) system call. If no time0 value is 
set or if time0 equal to 1 (special case) or if time0 equal 'local', 
the simulation will be started at the current local host time.
If time0 equal to 2 (special case) or if time0 equal 'utc',
the simulation will be started at the current utc time.

Syntax:
  clock: sync=[none|slowdown|realtime|both], time0=[timeValue|local|utc]

Default value are sync=none, time0=local

Example:
  clock: sync=realtime, time0=938581955   # Wed Sep 29 07:12:35 1999

.TP
.I "mouse:"
This option prevents Bochs from creating mouse "events"
unless a mouse is enabled. The hardware emulation itself
is not disabled  by this. You can turn the mouse on by
setting enabled to  1, or turn it off by setting enabled
to 0. Unless you have a particular reason  for enabling
the mouse by default, it is recommended that you leave
it off. You can also toggle the mouse usage at runtime
(control key + middle mouse button).
With the mouse type option you can select the type of mouse to emulate.
The default value is 'ps2'. The other choices are 'imps2' (wheel mouse
on PS/2), 'serial', 'serial_wheel' (one com port requires setting 'mode=mouse')
and 'usb' (3-button mouse - one of the USB ports must be connected with
the 'mouse' device - requires PCI and USB support).

Examples:
  mouse: enabled=0
  mouse: enabled=1, type=imps2

.TP
.I "private_colormap:"
Requests that the GUI create and use it's  own
non-shared colormap.  This  colormap  will  be
used when in the bochs window. If not enabled,
a shared  colormap  scheme  may be used.  Once
again, enabled=1  turns on this feature  and 0
turns it off.

Example:
  private_colormap: enabled=1

.TP
.I "i440fxsupport:"
This option controls the presence of the i440FX PCI chipset. You can
also specify the devices connected to PCI slots. Up to 5 slots are
available now. These devices are currently supported: ne2k, pcivga,
pcidev and pcipnic. If Bochs is compiled with Cirrus SVGA support
you'll have the additional choice 'cirrus'.

Example:
  i440fxsupport: enabled=1, slot1=pcivga, slot2=ne2k

.TP
.I "pcidev:"
Enables the mapping of a host PCI hardware device within the PCI subsystem of
the Bochs x86 emulator. This feature requires Linux as a host OS.

Example:
  pcidev: vendor=0x1234, device=0x5678

The vendor and device arguments should contain the vendor ID respectively the
device ID of the PCI device you want to map within Bochs.
.B The PCI mapping is still very experimental.

.TP
.I "ne2k:"
Defines the characteristics of an attached ne2000 isa card :
   ioaddr=IOADDR,
   irq=IRQ, 
   mac=MACADDR, 
   ethmod=MODULE, 
   ethdev=DEVICE, 
   script=SCRIPT

.B PROPERTIES FOR ne2k:

ioaddr, irq:
You probably won't need to change ioaddr and irq, unless there are IRQ conflicts.
These parameters are ignored if the NE2000 is assigned to a PCI slot.

mac:
The MAC address MUST NOT match the address of any machine on the net.
Also, the first byte must be an even number (bit 0 set means a multicast
address), and you cannot use ff:ff:ff:ff:ff:ff because that's the broadcast
address.  For the ethertap module, you must use fe:fd:00:00:00:01.  There may
be other restrictions too.  To be safe, just use the b0:c4... address.

ethmod:
The ethmod value defines which low level OS specific module to be used
to access physical ethernet interface. Current implemented values include
 - fbsd   : ethernet on freebsd and openbsd
 - linux  : ethernet on linux
 - win32  : ethernet on win32
 - tap    : ethernet through a linux tap interface
 - tuntap : ethernet through a linux tuntap interface

If you don't want to make connections to any physical networks,
you can use the following 'ethmod's to simulate a virtual network.
 - null   : All packets are discarded, but logged to a few files
 - arpback: ARP is simulated (disabled by default)
 - vde    : Virtual Distributed Ethernet
 - vnet   : ARP, ICMP-echo(ping), DHCP and TFTP are simulated
            The virtual host uses 192.168.10.1
            DHCP assigns 192.168.10.2 to the guest
            The TFTP server use ethdev for the root directory and doesn't
            overwrite files

ethdev:
The ethdev value is the name of the network interface on your host
platform.  On UNIX machines, you can get the name by running ifconfig.  On
Windows machines, you must run niclist to get the name of the ethdev.
Niclist source code is in misc/niclist.c and it is included in Windows
binary releases.

script:
The script value is optional, and is the name of a script that
is executed after bochs initialize the network interface. You can use
this script to configure this network interface, or enable masquerading.
This is mainly useful for the tun/tap devices that only exist during
Bochs execution. The network interface name is supplied to the script
as first parameter

Examples:
  ne2k: ioaddr=0x240, irq=9, mac=b0:c4:20:00:00:00, ethmod=fbsd, ethdev=xlo
  ne2k: ioaddr=0x240, irq=9, mac=b0:c4:20:00:00:00, ethmod=linux, ethdev=eth0
  ne2k: ioaddr=0x240, irq=9, mac=b0:c4:20:00:00:01, ethmod=win32, ethdev=MYCARD
  ne2k: ioaddr=0x240, irq=9, mac=fe:fd:00:00:00:01, ethmod=tap, ethdev=tap0
  ne2k: ioaddr=0x240, irq=9, mac=fe:fd:00:00:00:01, ethmod=tuntap, ethdev=/dev/net/tun0, script=./tunconfig
  ne2k: ioaddr=0x240, irq=9, mac=b0:c4:20:00:00:01, ethmod=vde, ethdev="/tmp/vde.ctl"
  ne2k: ioaddr=0x240, irq=9, mac=b0:c4:20:00:00:01, ethmod=vnet, ethdev="c:/temp"

.TP
.I "keyboard_mapping:"
This enables a remap of a physical localized keyboard to a
virtualized us keyboard, as the PC architecture expects.
If enabled, the keymap file must be specified.

 Examples:
   keyboard_mapping: enabled=1, map=gui/keymaps/x11-pc-de.map

.TP
.I "keyboard_type:"
Type of emulated keyboard sent back  to the OS
to a "keyboard identify"  command.  It must be 
one of "xt", "at" or "mf". 

Example:
  keyboard_type: mf

.TP
.I "user_shortcut:"
This defines the keyboard shortcut to be sent when you press the "user"
button in the headerbar. The shortcut string is a combination of maximum
3 key names (listed below) separated with a '-' character. The old-style
syntax (without the '-') still works for the key combinations supported
in Bochs 2.2.1.

Valid key names:

"alt", "bksl", "bksp", "ctrl", "del", "down", "end", "enter", "esc",
"f1", ... "f12", "home", "ins", "left", "menu", "minus", "pgdwn", "pgup", "plus",
"right", "shift", "space", "tab", "up", and "win".

Example:
  user_shortcut: keys=ctrl-alt-del

.TP
.I "cmosimage:"
This defines image file that can be loaded into the CMOS RAM at startup.
The rtc_init parameter controls whether initialize the RTC with values stored
in the image. By default the time0 argument given to the clock option is used.
With 'rtc_init=image' the image is the source for the initial time.

Example:
  cmosimage: file=cmos.img, rtc_init=time0

.TP
.I "usb1:"
This option controls the presence of the USB root hub which is a part
of the i440FX PCI chipset. With the portX option you can connect devices
to the hub (currently supported: 'mouse' and 'keypad'). If you connect
the mouse to one of the ports and use the mouse option 'type=usb' you'll
have a 3-button USB mouse.

Example:
  usb1: enabled=1, port1=mouse, port2=keypad

.\"SKIP_SECTION"
.SH LICENSE
This program  is distributed  under the terms of the  GNU
Lesser General Public License as published  by  the  Free
Software  Foundation.  See  the  COPYING file located  in
/usr/local/share/doc/bochs/ for details on the license and
the lack of warranty.
.\"SKIP_SECTION"
.SH AVAILABILITY
The latest version of this program can be found at:
  http://bochs.sourceforge.net/getcurrent.html
.\"SKIP_SECTION"
.SH SEE ALSO
bochs(1), bochs-dlx(1), bximage(1), bxcommit(1)
.PP
.nf
The Bochs IA-32 Emulator site on the World Wide Web:
        http://bochs.sourceforge.net

Online Bochs Documentation
	http://bochs.sourceforge.net/doc/docbook
.fi
.\"SKIP_SECTION"
.SH AUTHORS
The   Bochs  emulator  was   created   by  Kevin   Lawton
(kevin@mandrakesoft.com),  and  is  currently  maintained
by the  members of  the  Bochs x86 Emulator Project.  You
can see a current roster of members at:
  http://bochs.sourceforge.net/getinvolved.html
.\"SKIP_SECTION"
.SH BUGS
Please  report all  bugs to the bug tracker  on  our  web
site. Just go to http://bochs.sourceforge.net, and click
"Bug Reports" on the sidebar under "Feedback".
.PP
Provide a detailed description of the bug, the version of
the program you are running, the operating system you are
running the program on  and  the  operating   system  you
are running in the emulator.