//  Copyright (C) 2001  MandrakeSoft S.A.
//
//    MandrakeSoft S.A.
//    43, rue d'Aboukir
//    75002 Paris - France
//    http://www.linux-mandrake.com/
//    http://www.mandrakesoft.com/
//
//  This library is free software; you can redistribute it and/or
//  modify it under the terms of the GNU Lesser General Public
//  License as published by the Free Software Foundation; either
//  version 2 of the License, or (at your option) any later version.
//
//  This library is distributed in the hope that it will be useful,
//  but WITHOUT ANY WARRANTY; without even the implied warranty of
//  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
//  Lesser General Public License for more details.
//
//  You should have received a copy of the GNU Lesser General Public
//  License along with this library; if not, write to the Free Software
//  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA

//
// config.h.in is distributed in the source TAR file.  When you run
// the configure script, it generates config.h with some changes
// according to your build environment.  For example, in config.h.in,
// SIZEOF_UNSIGNED_CHAR is set to 0.  When configure produces config.h
// it will change "0" to the detected value for your system.
//
// config.h contains ONLY preprocessor #defines and a few typedefs.
// It must be included by both C and C++ files, so it must not
// contain anything language dependent such as a class declaration.
//

#ifndef _BX_CONFIG_H_
#define _BX_CONFIG_H_ 1

///////////////////////////////////////////////////////////////////
// USER CONFIGURABLE OPTIONS : EDIT ONLY OPTIONS IN THIS SECTION //
///////////////////////////////////////////////////////////////////


#if 1
// quit_sim is defined in gui/siminterface.h
#define BX_EXIT(x)  SIM->quit_sim (x)
#else
// provide the real main and the usual exit.
#define BX_EXIT(x)  ::exit(x)
#endif

// We have tested the following combinations:
//  * processors=1, bootstrap=0, ioapic_id=1   (uniprocessor system)
//  * processors=2, bootstrap=0, ioapic_id=2
//  * processors=4, bootstrap=0, ioapic_id=4
#define BX_SUPPORT_SMP 0
#define BX_BOOTSTRAP_PROCESSOR 0
#define BX_MAX_SMP_THREADS_SUPPORTED 8

// include in APIC models, required for a multiprocessor system.
#define BX_SUPPORT_APIC 0

#if (BX_SUPPORT_SMP && !BX_SUPPORT_APIC)
#error For multiprocessor simulation, BX_SUPPORT_APIC is required.
#endif

// if simulating Linux, this provides a few more debugging options
// such as tracing all system calls.
#define BX_DEBUG_LINUX 0

// adds support for the GNU readline library in the debugger command
// prompt.
#define HAVE_LIBREADLINE 0
#define HAVE_READLINE_HISTORY_H 0

// Define to 1 if you have <locale.h>
#define HAVE_LOCALE_H 0

// I rebuilt the code which provides timers to IO devices.
// Setting this to 1 will introduce a little code which
// will panic out if cases which shouldn't happen occur.
// Set this to 0 for optimal performance.
#define BX_TIMER_DEBUG 0

// Settable A20 line.  For efficiency, you can disable
// having a settable A20 line, eliminating conditional
// code for every physical memory access.  You'll have
// to tell your software not to mess with the A20 line,
// and accept it as always being on if you change this.
//   1 = use settable A20 line. (normal)
//   0 = A20 is like the rest of the address lines

#define BX_SUPPORT_A20 1

// Processor Instructions Per Second
// To find out what value to use for the 'ips' directive
// in your '.bochsrc' file, set BX_SHOW_IPS to 1, and
// run the software in bochs you plan to use most.  Bochs
// will print out periodic IPS ratings.  This will change
// based on the processor mode at the time, and various
// other factors.  You'll get a reasonable estimate though.
// When you're done, reset BX_SHOW_IPS to 0, do a
// 'make all-clean', then 'make' again.

#define BX_SHOW_IPS         0


#if (BX_SHOW_IPS) && (defined(__MINGW32__) || defined(_MSC_VER))
#define        SIGALRM         14
#endif

// Compile in support for DMA & FLOPPY IO.  You'll need this
// if you plan to use the floppy drive emulation.  But if
// you're environment doesn't require it, you can change
// it to 0.

#define BX_DMA_FLOPPY_IO 1

// Default number of Megs of memory to emulate.  The
// 'megs:' directive in the '.bochsrc' file overrides this,
// allowing per-run settings.

#define BX_DEFAULT_MEM_MEGS 32

// CPU level emulation.  Default level is set in
// the configure script.  BX_CPU_LEVEL defines the CPU level
// to emulate.  BX_CPU_LEVEL_HACKED is a hack to define the
// level of some instructions, so they can be tested before
// the rest of the emulation is up to that level.

#define BX_CPU_LEVEL 0
#define BX_CPU_LEVEL_HACKED 0

// emulate x86-64 instruction set?
#define BX_SUPPORT_X86_64 0

// emulate long physical address (>32 bit)
#define BX_PHY_ADDRESS_LONG 0

#define BX_HAVE_SLEEP 0
#define BX_HAVE_MSLEEP 0
#define BX_HAVE_USLEEP 0
#define BX_HAVE_NANOSLEEP 0
#define BX_HAVE_ABORT 0
#define BX_HAVE_SOCKLEN_T 0
#define BX_HAVE_SOCKADDR_IN_SIN_LEN 0
#define BX_HAVE_GETTIMEOFDAY 0
#if defined(WIN32)
#define BX_HAVE_REALTIME_USEC 1
#else
#define BX_HAVE_REALTIME_USEC (BX_HAVE_GETTIMEOFDAY)
#endif
#define BX_HAVE_MKSTEMP 0
#define BX_HAVE_SYS_MMAN_H 0
#define BX_HAVE_XPM_H 0
#define BX_HAVE_TIMELOCAL 0
#define BX_HAVE_GMTIME 0
#define BX_HAVE_MKTIME 0
#define BX_HAVE_NET_IF_H 0

// This turns on Roland Mainz's idle hack.  Presently it is specific to the X11
// and term gui. If people try to enable it elsewhere, give a compile error
// after the gui definition so that they don't waste their time trying.
#define BX_USE_IDLE_HACK 0

// Minimum Emulated IPS.
// This is used in the realtime PIT as well as for checking the
// IPS value set in the config file.
#define BX_MIN_IPS 200000

// Minimum and maximum values for SMP quantum variable. Defines
// how many instructions each CPU could execute execute in one
// shot (one cpu_loop call)
#define BX_SMP_QUANTUM_MIN  1
#define BX_SMP_QUANTUM_MAX 16

// Use Static Member Funtions to eliminate 'this' pointer passing
// If you want the efficiency of 'C', you can make all the
// members of the C++ CPU class to be static.
// This defaults to 1 since it should improve performance, but when
// SMP mode is enabled, it will be turned off by configure.
#define BX_USE_CPU_SMF 1

#define BX_USE_MEM_SMF 1

// Use static member functions in IO DEVice emulation modules.
// For efficiency, use C like functions for IO handling,
// and declare a device instance at compile time,
// instead of using 'new' and storing the pointer.  This
// eliminates some overhead, especially for high-use IO
// devices like the disk drive.
//   1 = Use static member efficiency (normal)
//   0 = Use nonstatic member functions (use only if you need
//       multiple instances of a device class

#define BX_USE_HD_SMF       1  // Hard drive
#define BX_USE_BIOS_SMF     1  // BIOS
#define BX_USE_CMOS_SMF     1  // CMOS
#define BX_USE_DMA_SMF      1  // DMA
#define BX_USE_FD_SMF       1  // Floppy
#define BX_USE_KEY_SMF      1  // Keyboard
#define BX_USE_PAR_SMF      1  // Parallel
#define BX_USE_PIC_SMF      1  // PIC
#define BX_USE_PIT_SMF      1  // PIT
#define BX_USE_SER_SMF      1  // Serial
#define BX_USE_UM_SMF       1  // Unmapped
#define BX_USE_VGA_SMF      1  // VGA
#define BX_USE_SB16_SMF     1  // Sound (SB 16)
#define BX_USE_DEV_SMF      1  // System Devices (port92)
#define BX_USE_PCI_SMF      1  // PCI
#define BX_USE_P2I_SMF      1  // PCI-to-ISA bridge
#define BX_USE_PIDE_SMF     1  // PCI-IDE
#define BX_USE_PCIVGA_SMF   1  // PCI-VGA
#define BX_USE_PCIDEV_SMF   1  // PCI-DEV
#define BX_USE_PCIUSB_SMF   1  // USB hub
#define BX_USE_PCIPNIC_SMF  1  // PCI pseudo NIC
#define BX_USE_NE2K_SMF     1  // NE2K
#define BX_USE_EFI_SMF      1  // External FPU IRQ
#define BX_USE_GAMEPORT_SMF 1  // Gameport
#define BX_USE_CIRRUS_SMF   1  // SVGA Cirrus
#define BX_USE_BUSM_SMF     1  // Bus Mouse
#define BX_USE_ACPI_SMF     1  // ACPI

#define BX_PLUGINS  0
#define BX_HAVE_DLFCN_H 0

#if BX_PLUGINS && \
  (   !BX_USE_HD_SMF || !BX_USE_BIOS_SMF || !BX_USE_CMOS_SMF \
   || !BX_USE_DMA_SMF || !BX_USE_FD_SMF || !BX_USE_KEY_SMF \
   || !BX_USE_PAR_SMF || !BX_USE_PIC_SMF || !BX_USE_PIT_SMF \
   || !BX_USE_SER_SMF || !BX_USE_UM_SMF || !BX_USE_VGA_SMF \
   || !BX_USE_SB16_SMF || !BX_USE_DEV_SMF || !BX_USE_PCI_SMF \
   || !BX_USE_P2I_SMF || !BX_USE_PCIVGA_SMF || !BX_USE_PCIUSB_SMF \
   || !BX_USE_PCIPNIC_SMF || !BX_USE_PIDE_SMF || !BX_USE_ACPI_SMF \
   || !BX_USE_NE2K_SMF || !BX_USE_EFI_SMF || !BX_USE_GAMEPORT_SMF \
   || !BX_USE_PCIDEV_SMF || !BX_USE_CIRRUS_SMF)
#error You must use SMF to have plugins
#endif

#define BX_SUPPORT_SB16     0
#define BX_SUPPORT_GAMEPORT 0

#if BX_SUPPORT_SB16
// Use virtual methods for the sound output functions
#define BX_USE_SOUND_VIRTUAL  1
// Determines which sound output class is to be used.
// Currently the following are available:
//    bx_sound_linux_c      Output for Linux, to /dev/dsp and /dev/midi00
//    bx_sound_windows_c    Output for Windows midi and wave mappers
//    bx_sound_output_c     Dummy functions, no output
#define BX_SOUND_OUTPUT_C  bx_sound_output_c
#endif

#define USE_RAW_SERIAL 0

// This enables writing to port 0xe9 and the output
// is sent to the console.  Reading from port 0xe9
// will return 0xe9 to let you know this is available.
// Leave this 0 unless you have a reason to use it.
#define BX_PORT_E9_HACK 0

#define BX_GDBSTUB 0

// This option enables compressed (zlib) hd support
#define BX_COMPRESSED_HD_SUPPORT 0
#define BX_HAVE_ZLIB 0

#if BX_COMPRESSED_HD_SUPPORT && !BX_HAVE_ZLIB
#error You must have zlib to enable compressed hd support
#endif

// This option defines the number of supported ATA channels.
// There are up to two drives per ATA channel.
#define BX_MAX_ATA_CHANNEL 4

#if (BX_MAX_ATA_CHANNEL>4 || BX_MAX_ATA_CHANNEL<1)
#  error "BX_MAX_ATA_CHANNEL should be between 1 and 4"
#endif

// =================================================================
// BEGIN: OPTIONAL DEBUGGER SECTION
//
// These options are only used if you compile in support for the
// native command line debugging environment.  Typically, the debugger
// is not used, and this section can be ignored.
// =================================================================

// Compile in support for virtual/linear/physical breakpoints.
// Enable only those you need. Recommend using only linear
// breakpoints, unless you need others. Less supported means
// slightly faster execution time.
#define BX_DBG_MAX_VIR_BPOINTS 10
#define BX_DBG_MAX_LIN_BPOINTS 10
#define BX_DBG_MAX_PHY_BPOINTS 10

// max file pathname size for debugger commands
#define BX_MAX_PATH     256
// max nesting level for debug scripts including other scripts
#define BX_INFILE_DEPTH  10
// use this command to include (nest) debug scripts
#define BX_INCLUDE_CMD   "source"

// Make a call to command line debugger extensions.  If set to 1,
// a call is made.  An external routine has a chance to process
// the command.  If it does, than the debugger ignores the command.
#define BX_DBG_EXTENSIONS 0

// =================================================================
// END: OPTIONAL DEBUGGER SECTION
// =================================================================

//////////////////////////////////////////////////////////////////////
// END OF USER CONFIGURABLE OPTIONS : DON'T EDIT ANYTHING BELOW !!! //
// THIS IS GENERATED BY THE ./configure SCRIPT                      //
//////////////////////////////////////////////////////////////////////


#define BX_WITH_X11 0
#define BX_WITH_BEOS 0
#define BX_WITH_WIN32 0
#define BX_WITH_MACOS 0
#define BX_WITH_CARBON 0
#define BX_WITH_NOGUI 0
#define BX_WITH_TERM 0
#define BX_WITH_RFB 0
#define BX_WITH_AMIGAOS 0
#define BX_WITH_SDL 0
#define BX_WITH_SVGA 0
#define BX_WITH_WX 0

// BX_USE_TEXTCONFIG should be set to 1 unless Bochs is compiled
// for wxWidgets only.
#define BX_USE_TEXTCONFIG 1

// A certain functions must NOT be fastcall even if compiled with fastcall
// option, and those are callbacks from Windows which are defined either 
// as cdecl or stdcall. The entry point main() also has to remain cdecl.
#ifndef CDECL
#if defined(_MSC_VER)
  #define CDECL __cdecl
#else
  #define CDECL
#endif
#endif

// add special export symbols for win32 DLL building.  The main code must
// have __declspec(dllexport) on variables, functions, or classes that the
// plugins can access.  The plugins should #define PLUGGABLE which will
// activate the __declspec(dllimport) instead.
#if defined(WIN32) || defined(__CYGWIN__)
#  if BX_PLUGINS && defined(BX_PLUGGABLE)
//   #warning I will import DLL symbols from Bochs main program.
#    define BOCHSAPI __declspec(dllimport)
#  elif BX_PLUGINS
//   #warning I will export DLL symbols.
#    define BOCHSAPI __declspec(dllexport)
#  endif
#endif
#ifndef BOCHSAPI
#  define BOCHSAPI
#endif

#if defined(__CYGWIN__)
// Make BOCHSAPI_CYGONLY exactly the same as BOCHSAPI.  This symbol
// will be used for any cases where Cygwin requires a special tag
// but VC++ does not.
#define BOCHSAPI_CYGONLY BOCHSAPI
#else
// define the symbol to be empty
#define BOCHSAPI_CYGONLY /*empty*/
#endif

#if defined(_MSC_VER)
// Make BOCHSAPI_MSVCONLY exactly the same as BOCHSAPI.  This symbol
// will be used for any cases where VC++ requires a special tag
// but Cygwin does not.
#define BOCHSAPI_MSVCONLY BOCHSAPI
#else
// define the symbol to be empty
#define BOCHSAPI_MSVCONLY /*empty*/
#endif

#define BX_DEFAULT_CONFIG_INTERFACE "defined_by_configure"
#define BX_DEFAULT_DISPLAY_LIBRARY "defined_by_configure"

// Roland Mainz's idle hack is presently specific to X11. If people try to
// enable it elsewhere, give a compile error so that they don't waste their
// time trying.
#if (BX_USE_IDLE_HACK && !BX_WITH_X11 && !BX_WITH_TERM)
#  error IDLE_HACK will only work with the X11 or term gui. Correct configure args and retry.
#endif

#define WORDS_BIGENDIAN 0

#define SIZEOF_UNSIGNED_CHAR      0
#define SIZEOF_UNSIGNED_SHORT     0
#define SIZEOF_UNSIGNED_INT       0
#define SIZEOF_UNSIGNED_LONG      0
#define SIZEOF_UNSIGNED_LONG_LONG 0
#define SIZEOF_INT_P              0

#define BX_64BIT_CONSTANTS_USE_LL 1
#if BX_64BIT_CONSTANTS_USE_LL
// doesn't work on Microsoft Visual C++, maybe others
#define BX_CONST64(x)  (x##LL)
#elif defined(_MSC_VER)
#define BX_CONST64(x)  (x##I64)
#else
#define BX_CONST64(x)  (x)
#endif

#if defined(WIN32)
  typedef unsigned char      Bit8u;
  typedef   signed char      Bit8s;
  typedef unsigned short     Bit16u;
  typedef   signed short     Bit16s;
  typedef unsigned int       Bit32u;
  typedef   signed int       Bit32s;
#ifdef __MINGW32__
  typedef unsigned long long Bit64u;
  typedef   signed long long Bit64s;
#include <sys/types.h>
#else
  typedef unsigned __int64   Bit64u;
  typedef   signed __int64   Bit64s;
#endif
#elif BX_WITH_MACOS
  typedef unsigned char      Bit8u;
  typedef   signed char      Bit8s;
  typedef unsigned short     Bit16u;
  typedef   signed short     Bit16s;
  typedef unsigned int       Bit32u;
  typedef   signed int       Bit32s;
  typedef unsigned long long Bit64u;
  typedef   signed long long Bit64s;
#else

// Unix like platforms

#if SIZEOF_UNSIGNED_CHAR != 1
#  error "sizeof (unsigned char) != 1"
#else
  typedef unsigned char Bit8u;
  typedef   signed char Bit8s;
#endif

#if SIZEOF_UNSIGNED_SHORT != 2
#  error "sizeof (unsigned short) != 2"
#else
  typedef unsigned short Bit16u;
  typedef   signed short Bit16s;
#endif

#if SIZEOF_UNSIGNED_INT == 4
  typedef unsigned int Bit32u;
  typedef   signed int Bit32s;
#elif SIZEOF_UNSIGNED_LONG == 4
  typedef unsigned long Bit32u;
  typedef   signed long Bit32s;
#else
#  error "can't find sizeof(type) of 4 bytes!"
#endif

#if SIZEOF_UNSIGNED_LONG == 8
  typedef unsigned long Bit64u;
  typedef   signed long Bit64s;
#elif SIZEOF_UNSIGNED_LONG_LONG == 8
  typedef unsigned long long Bit64u;
  typedef   signed long long Bit64s;
#else
#  error "can't find data type of 8 bytes"
#endif

#endif

#define GET32L(val64) ((Bit32u)(((Bit64u)(val64)) & 0xFFFFFFFF))
#define GET32H(val64) ((Bit32u)(((Bit64u)(val64)) >> 32))

// now that Bit32u and Bit64u exist, defined bx_address
#if BX_SUPPORT_X86_64
typedef Bit64u bx_address;
#else
typedef Bit32u bx_address;
#endif

// define physical and linear address types
typedef bx_address bx_lin_address;

#if BX_SUPPORT_X86_64
#define BX_LIN_ADDRESS_WIDTH 48
#else
#define BX_LIN_ADDRESS_WIDTH 32
#endif

#if BX_PHY_ADDRESS_LONG
typedef Bit64u bx_phy_address;
#define BX_PHY_ADDRESS_WIDTH 40
#else
typedef Bit32u bx_phy_address;
#define BX_PHY_ADDRESS_WIDTH 32
#endif

// technically, in an 8 bit signed the real minimum is -128, not -127.
// But if you decide to negate -128 you tend to get -128 again, so it's
// better not to use the absolute maximum in the signed range.
#define BX_MAX_BIT64U ( (Bit64u) -1           )
#define BX_MIN_BIT64U ( 0                     )
#define BX_MAX_BIT64S ( ((Bit64u) -1) >> 1    )
#define BX_MIN_BIT64S ( (Bit64s)-(((Bit64u) -1) >> 1) )
#define BX_MAX_BIT32U ( (Bit32u) -1           )
#define BX_MIN_BIT32U ( 0                     )
#define BX_MAX_BIT32S ( ((Bit32u) -1) >> 1    )
#define BX_MIN_BIT32S ( (Bit32s)-(((Bit32u) -1) >> 1) )
#define BX_MAX_BIT16U ( (Bit16u) -1           )
#define BX_MIN_BIT16U ( 0                     )
#define BX_MAX_BIT16S ( ((Bit16u) -1) >> 1    )
#define BX_MIN_BIT16S ( (Bit16s)-(((Bit16u) -1) >> 1) )
#define BX_MAX_BIT8U  ( (Bit8u) -1            )
#define BX_MIN_BIT8U  ( 0                     )
#define BX_MAX_BIT8S  ( ((Bit8u) -1) >> 1     )
#define BX_MIN_BIT8S  ( (Bit8s)-(((Bit8u) -1) >> 1)  )


// create an unsigned integer type that is the same size as a pointer.
// You can typecast a pointer to a bx_pr_equiv_t without losing any
// bits (and without getting the compiler excited).  This is used in
// the FPU emulation code, where pointers and integers are often
// used interchangeably.
#if SIZEOF_INT_P == 4
  typedef Bit32u bx_ptr_equiv_t;
#elif SIZEOF_INT_P == 8
  typedef Bit64u bx_ptr_equiv_t;
#else
#  error "could not define bx_ptr_equiv_t to size of int*"
#endif

// Use a boolean type that will not conflict with the builtin type
// on any system.
typedef Bit32u bx_bool;

#if BX_WITH_MACOS
#  define bx_ptr_t char *
#else
#  define bx_ptr_t void *
#endif

#if defined(WIN32)
#  define BX_LITTLE_ENDIAN
#elif BX_WITH_MACOS
#  define BX_BIG_ENDIAN
#else
#if WORDS_BIGENDIAN
#  define BX_BIG_ENDIAN
#else
#  define BX_LITTLE_ENDIAN
#endif
#endif // defined(WIN32)


#if BX_SUPPORT_X86_64
#ifdef BX_LITTLE_ENDIAN
typedef
  struct {
         Bit64u lo;
         Bit64u hi;
         } Bit128u;
typedef
  struct {
         Bit64u lo;
         Bit64s hi;
         } Bit128s;
#else   // must be Big Endian
typedef
  struct {
         Bit64u hi;
         Bit64u lo;
         } Bit128u;
typedef
  struct {
         Bit64s hi;
         Bit64u lo;
         } Bit128s;
#endif
#endif  // #if BX_SUPPORT_X86_64


// for now only term.cc requires a GUI sighandler.
#define BX_GUI_SIGHANDLER (BX_WITH_TERM)

#define HAVE_SIGACTION 1

// configure will change the definition of "inline" to the value
// that the C compiler allows.  It tests the following keywords to
// see if any is permitted: inline, __inline__, __inline.  If none
// is permitted, it defines inline to be empty.
#define inline inline

// inline functions in headers that are compiled with C compiler
// (e.g. fpu code) are declared with BX_C_INLINE macro.  Note that
// the word "inline" itself may now be redefined by the above #define.
// Many compilers are known to work with "static inline".  If the
// compiler can put the function inline, it does so and never creates
// a symbol for the function.  If optimization is off, or inline is
// defined to be empty, the static keyword causes the function to create
// a symbol that's visible only to that .c file.  Each .c file that
// includes the header will produde another local version of the
// BX_C_INLINE function (not ideal).  However without "static" you can
// duplicate symbol problems which are even worse.
#define BX_C_INLINE static inline

// Use BX_CPP_INLINE for all C++ inline functions.  Note that the
// word "inline" itself may now be redefined by the above #define.
#define BX_CPP_INLINE inline

#ifdef __GNUC__

// Some helpful compiler hints for compilers that allow them; GCC for now.
//
// BX_CPP_AlignN(n):
//   Align a construct on an n-byte boundary.
//
// BX_CPP_AttrPrintf(formatArg, firstArg):
//   This function takes printf-like arguments, so the compiler can check
//   the consistency of the format string and the matching arguments.
//   'formatArg' is the parameter number (starting from 1) of the format
//   string argument.  'firstArg' is the parameter number of the 1st argument
//   to check against the string argument.  NOTE: For non-static member
//   functions, the this-ptr is argument number 1 but is invisible on
//   the function prototype declaration - but you still have to count it.
//
// BX_CPP_AttrNoReturn():
//   This function never returns.  The compiler can optimize-out following
//   code accordingly.

#define BX_CPP_AlignN(n) __attribute__ ((aligned (n)))
#define BX_CPP_AttrPrintf(formatArg, firstArg) \
                          __attribute__ ((format (printf, formatArg, firstArg)))
#define BX_CPP_AttrNoReturn() __attribute__ ((noreturn))

#else

#define BX_CPP_AlignN(n) /* Not supported. */
#define BX_CPP_AttrPrintf(formatArg, firstArg)  /* Not supported. */
#define BX_CPP_AttrNoReturn() /* Not supported. */

#endif

#define BX_DEBUGGER 0
#define BX_DISASM   0

#if (BX_DEBUGGER == 1) && (BX_DISASM == 0)
#error Dissembler is required for BX_DEBUGGER !
#endif

#define BX_PROVIDE_CPU_MEMORY    1
#define BX_PROVIDE_DEVICE_MODELS 1

#define BX_PROVIDE_MAIN       1

#define BX_INSTRUMENTATION    0

// enable BX_DEBUG/BX_ERROR/BX_INFO messages
#define BX_NO_LOGGING 0

// limited i440FX PCI support
#define BX_SUPPORT_PCI 0

// Bochs VBE display interface
#define BX_SUPPORT_VBE 0

// CLGD54XX emulation
#define BX_SUPPORT_CLGD54XX 0

// ACPI controller
#define BX_SUPPORT_ACPI 0

#if (BX_SUPPORT_ACPI && !BX_SUPPORT_PCI)
#error To enable ACPI support, you must also enable PCI
#endif

// Experimental VGA on PCI
#define BX_SUPPORT_PCIVGA 0

// Experimental host PCI device mapping
#define BX_SUPPORT_PCIDEV 0

#if (BX_SUPPORT_PCIDEV && !BX_SUPPORT_PCI)
#error To enable PCI host device mapping, you must also enable PCI
#endif

// limited USB on PCI
#define BX_SUPPORT_PCIUSB 0

#if (BX_SUPPORT_PCIUSB && !BX_SUPPORT_PCI)
#error To enable USB, you must also enable PCI
#endif

#define BX_SUPPORT_BUSMOUSE 0

#define BX_SUPPORT_ALIGNMENT_CHECK 0
#define BX_SUPPORT_FPU 0
#define BX_SUPPORT_MMX 0
#define BX_SUPPORT_3DNOW 0
#define BX_SUPPORT_SSE 0
#define BX_SUPPORT_SSE_EXTENSION 0
#define BX_SUPPORT_SSE4A 0
#define BX_SUPPORT_SSE5A 0
#define BX_SUPPORT_DAZ 0
#define BX_SUPPORT_MISALIGNED_SSE 0
#define BX_SUPPORT_SEP 0
#define BX_SUPPORT_VME 0
#define BX_SUPPORT_POPCNT 0
#define BX_SUPPORT_MONITOR_MWAIT 0
#define BX_SUPPORT_XSAVE 0
#define BX_SUPPORT_AES 0

#define BX_SUPPORT_MTRR 0
#define BX_SUPPORT_LARGE_PAGES 0
#define BX_SUPPORT_GLOBAL_PAGES 0
#define BX_SUPPORT_PAE 0

#define BX_SupportGuest2HostTLB 0
#define BX_SupportRepeatSpeedups 0
#define BX_SupportHostAsms 0

#define BX_SUPPORT_ICACHE 0
#define BX_SUPPORT_TRACE_CACHE 0

#if (BX_SUPPORT_TRACE_CACHE && BX_SUPPORT_ICACHE==0)
#error Trace cache optimization cannot be compiled without iCache!
#endif

// if 1, don't do gpf on MSRs that we don't implement
#define BX_IGNORE_BAD_MSR 0

// CLFLUSH was introduced together with SSE2 instruction set
#if BX_SUPPORT_SSE >= 2
  #define BX_SUPPORT_CLFLUSH 1
#else
  #define BX_SUPPORT_CLFLUSH 0
#endif

#if (BX_SUPPORT_ALIGNMENT_CHECK && BX_CPU_LEVEL < 4)
#error Alignment exception check is not supported in i386 !
#endif

#if (BX_SUPPORT_VME && BX_CPU_LEVEL < 5)
#error With CPU level < 5, you must disable v8086 mode extensions !
#endif

#if (BX_SUPPORT_MMX && BX_CPU_LEVEL < 5)
#error With CPU level < 5, you must disable MMX support !
#endif

#if (!BX_SUPPORT_FPU && BX_CPU_LEVEL > 4)
#error With CPU level > 4, you must enable FPU support !
#endif

#if (BX_SUPPORT_MMX && !BX_SUPPORT_FPU)
#error "MMX cannot be compiled without FPU support !"
#endif

#if (BX_SUPPORT_FPU && BX_CPU_LEVEL < 3)
#error "FPU cannot be compiled without cpu level >= 3 !"
#endif

#if (BX_SUPPORT_3DNOW && !BX_SUPPORT_MMX)
#error "3DNow! cannot be compiled without MMX support !"
#endif

#if (BX_SUPPORT_AES && !BX_SUPPORT_SSE)
#error "AES cannot be compiled without SSE support !"
#endif

#if (BX_SUPPORT_XSAVE && !BX_SUPPORT_SSE)
#error "XSAVE cannot be compiled without SSE support !"
#endif

#if (BX_SUPPORT_SSE && !BX_SUPPORT_MMX)
#error "SSE cannot be compiled without FPU+MMX support !"
#endif

#if (BX_CPU_LEVEL<6 && BX_SUPPORT_SSE)
#error "SSE is only supported with CPU_LEVEL >= 6 !"
#endif

#if (BX_CPU_LEVEL<6 && BX_SUPPORT_SEP)
#error "SYSENTER/SYSEXIT only supported with CPU_LEVEL >= 6 !"
#endif

#if (BX_CPU_LEVEL<6 && BX_SUPPORT_PAE)
#error "Physical Address Extensions (PAE) only supported with CPU_LEVEL >= 6 !"
#endif
#if (BX_CPU_LEVEL<6 && BX_SUPPORT_GLOBAL_PAGES)
#error "Page Global Extension (PGE) only supported with CPU_LEVEL >= 6 !"
#endif
#if (BX_CPU_LEVEL<5 && BX_SUPPORT_LARGE_PAGES)
#error "Page Size Extension (PSE) only supported with CPU_LEVEL >= 5 !"
#endif
#if (BX_CPU_LEVEL<6 && BX_SUPPORT_MTRR)
#error "MTRRs only supported with CPU_LEVEL >= 6 !"
#endif

#if (BX_SUPPORT_PAE && !BX_SUPPORT_LARGE_PAGES)
#error "Physical Address Extensions (PAE) requires large pages support !"
#endif

#if BX_SUPPORT_X86_64
// Sanity checks to ensure that you cannot accidently use conflicting options.

#if BX_CPU_LEVEL < 6
#error "X86-64 requires cpu level 6 or greater !"
#endif
#if (BX_SUPPORT_SSE<2)
#error "X86-64 requires SSE2 !"
#endif
#if !BX_SUPPORT_PAE
#error "X86-64 requires Physical Address Extensions (PAE) !"
#endif
#if !BX_SUPPORT_GLOBAL_PAGES
#error "X86-64 requires Page Global Extension (PGE) !"
#endif
#if !BX_SUPPORT_LARGE_PAGES
#error "X86-64 requires Page Size Extension (PSE) !"
#endif
#endif

#define BX_HAVE_GETENV 0
#define BX_HAVE_SETENV 0
#define BX_HAVE_SELECT 0
#define BX_HAVE_SNPRINTF 0
#define BX_HAVE_VSNPRINTF 0
#define BX_HAVE_STRTOULL 0
#define BX_HAVE_STRTOUQ 0
#define BX_HAVE_STRDUP 0
#define BX_HAVE_STRREV 0
#define BX_HAVE_STRUCT_TIMEVAL 0

// used in term gui
#define BX_HAVE_COLOR_SET 0
#define BX_HAVE_MVHLINE 0
#define BX_HAVE_MVVLINE 0


// set if your compiler does not permit an empty struct
#define BX_NO_EMPTY_STRUCTS 0

// set if your compiler does not understand __attribute__ after a struct
#define BX_NO_ATTRIBUTES 0
#if BX_NO_ATTRIBUTES
#define GCC_ATTRIBUTE(x) /* attribute not supported */
#else
#define GCC_ATTRIBUTE __attribute__
#endif

// set to use fast function calls
#define BX_FAST_FUNC_CALL 0

// On gcc2.95+ x86 only
#if BX_FAST_FUNC_CALL && defined(__i386__) && defined(__GNUC__) && (__GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 95))
#if BX_USE_CPU_SMF == 1
#  define BX_CPP_AttrRegparmN(X) __attribute__((regparm(X)))
#else
// FIXME: BX_FAST_FUNC_CALL doesn't work with BX_USE_CPU_SMF = 0
#  define BX_CPP_AttrRegparmN(X) /* Not defined */
#endif
#else
#  define BX_CPP_AttrRegparmN(X) /* Not defined */
#endif

// set if your compiler does not allow label at the end of a {} block
#define BX_NO_BLANK_LABELS 0

// set if you do have <hash_map>, used in bx_debug/dbg_main.c
#define BX_HAVE_HASH_MAP 0

// set if you do have <hash_map.h>, used in bx_debug/dbg_main.c
#define BX_HAVE_HASH_MAP_H 0

// set if you do have <set>, used in bx_debug/dbg_main.c
#define BX_HAVE_SET 0

// set if you do have <set.h>, used in bx_debug/dbg_main.c
#define BX_HAVE_SET_H 0

// Support x86 hardware debugger registers and facilites.
// These are the debug facilites offered by the x86 architecture,
// not the optional built-in debugger.
#define BX_X86_DEBUGGER 0

#define BX_SUPPORT_CDROM 0

#if BX_SUPPORT_CDROM
   // This is the C++ class name to use if we are supporting
   // low-level CDROM.
#  define LOWLEVEL_CDROM cdrom_interface
#endif

// NE2K network emulation
#define BX_SUPPORT_NE2K 0

// Pseudo PCI NIC
#define BX_SUPPORT_PCIPNIC 0

#if (BX_SUPPORT_PCIPNIC && !BX_SUPPORT_PCI)
#error To enable the PCI pseudo NIC, you must also enable PCI
#endif

// this enables the lowlevel stuff below if one of the NICs is present
#define BX_NETWORKING 0

#define BX_ETH_NULL_LOGGING 1
#define BX_ETH_FBSD_LOGGING 1

// determine which NE2K packet mover modules will be enabled
// (this was moved from iodev/eth.h)
#define ETH_NULL  1
#ifdef BX_USE_ETH_ARPBACK
#  define ETH_ARPBACK 1
#endif
#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__OpenBSD__) || defined(__NetBSD__) || defined(__NetBSD_kernel__) || defined(__APPLE__)
#define ETH_FBSD  1
#endif
#if defined(linux)
#define ETH_LINUX 1
#endif
#if defined(WIN32)
#define ETH_WIN32 1
#endif

// this enables Ethertap packet mover; determined by configure script
#define HAVE_ETHERTAP 0

// this enables TUN/TAP packet mover; determined by configure script
#define HAVE_TUNTAP 0

// this enables VDE packet mover; determined by configure script
#define HAVE_VDE 0


// I/O Interface to debug
#define BX_SUPPORT_IODEBUG 0

// External Debugger
#define BX_EXTERNAL_DEBUGGER 0

#ifdef WIN32
#define BX_FLOPPY0_NAME "Floppy Disk A:"
#define BX_FLOPPY1_NAME "Floppy Disk B:"
#else
#define BX_FLOPPY0_NAME "Floppy Disk 0"
#define BX_FLOPPY1_NAME "Floppy Disk 1"
#endif

#endif  // _BX_CONFIG_H