1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
|
Starting from version 7.0, WindowEyes can use OEM-provided drivers, this is
such driver for making it use the BrlAPI interface.
It can be added by
* copying webrloem109.dll to the window eyes directory, along wineyes.exe,
* copy/pasting the content of braille.ini into your braille.ini (found in the
Application Data\GW Micro\Window-Eyes/users/default/ ), and in the same file,
appending the following two lines to the [BrailleDisplays] section:
brl##=oem109
brl###=oem109-raw
where ## and ### are the numbers right after the last one of that section, e.g.
if there was
brl55=zephyr
then these lines should be added:
brl56=oem109
brl57=oem109-raw
Restart WindowEyes, two BrlAPI choices should now appear last in the list.
- BrlAPI generic should work with any device, as it binds the brltty commands to
WindowEyes commands.
- BrlAPI device-specific permits to define device-specific bindings: WindowEyes
will get keyboard keycode as such, the user can then bind them at will from
the WindowEyes interface.
Note that here the Com1/Com2 parameter does not refer to an actual serial
device (the serial/usb configuration shall be done in brltty.conf), it refers to
how keycodes should be reported to WindowEyes: Com1 should always be used for
BrlAPI generic, and Com2 for BrlAPI device-specific.
|
