1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
|
idVendor: 0x0783
iManufacturer: C3PO
idProduct: 0x0006
iProduct: USB SMART CARD READER
bcdDevice: 0.08 (firmware release?)
bLength: 9
bDescriptorType: 4
bInterfaceNumber: 0
bAlternateSetting: 0
bNumEndpoints: 3
bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
bInterfaceSubClass: 0
bInterfaceProtocol: 0
iInterface: 0
CCID Class Descriptor
bLength: 0x36
bDescriptorType: 0x21
bcdCCID: 1.00
bMaxSlotIndex: 0x00
bVoltageSupport: 0x01
5.0V
dwProtocols: 0x0000 0x0003
T=0
T=1
dwDefaultClock: 4.000 MHz
dwMaximumClock: 20.000 MHz
bNumClockSupported: 0 (will use whatever is returned)
IFD does not support GET CLOCK FREQUENCIES request
dwDataRate: 9600 bps
dwMaxDataRate: 230400 bps
bNumDataRatesSupported: 0 (will use whatever is returned)
IFD does not support GET_DATA_RATES request
dwMaxIFSD: 254
dwSynchProtocols: 0x00000001
2-wire protocol
dwMechanical: 0x00000000
No special characteristics
dwFeatures: 0x000100BA
....02 Automatic parameter configuration based on ATR data
....08 Automatic ICC voltage selection
....10 Automatic ICC clock frequency change according to parameters
....20 Automatic baud rate change according to frequency and Fi, Di params
....80 Automatic PPS made by the CCID
01.... TPDU level exchange
dwMaxCCIDMessageLength: 271 bytes
bClassGetResponse: 0x00
bClassEnveloppe: 0x00
wLcdLayout: 0x0000
bPINSupport: 0x00
bMaxCCIDBusySlots: 1
|