1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108
|
/*
* vim:tw=80:ai:tabstop=4:softtabstop=4:shiftwidth=4:expandtab
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* (C) Copyright Phil Dibowitz 2007
*/
/*
* These are all the commands and responses that can be sent to the remote.
*
* This lists all base commands (first nibble of first byte), and also the
* sub-command for those commands that have them.
*
* The second nibble of the *first* byte is a size mapping.
*
* For more details please see specs/protocol.h
*
* Below, where the second half of the byte may change, it's always defined
* as a 0. However, where the command will always be a static size, it's
* defined with that value.
*/
#ifndef PROTOCOL_H
#define PROTOCOL_H
/*
* Masks for command nibble and length nibble
*/
#define COMMAND_MASK 0xF0
#define LENGTH_MASK 0x0F
/*
* Base commands one can send to the Harmony
*/
#define COMMAND_INVALID 0x00
#define COMMAND_GET_VERSION 0x10
#define COMMAND_WRITE_FLASH 0x30
#define COMMAND_WRITE_FLASH_DATA 0x40
#define COMMAND_READ_FLASH 0x50
/*
* Byte 2 for ... flash command?
*/
#define COMMAND_PROM_TYPE_MCU_FLASH 0x01
#define COMMAND_PROM_TYPE_MCU_EEPROM 0x02
#define COMMAND_PROM_TYPE_MCU_ID 0x03
#define COMMAND_PROM_TYPE_EXT_FLASH 0x04
/*
* Continuing with our base commands
*/
#define COMMAND_START_IRCAP 0x70
#define COMMAND_STOP_IRCAP 0x80
#define COMMAND_WRITE_MISC 0xA0
#define COMMAND_READ_MISC 0xB0
/*
* Byte 2 for COMMAND_*_MISC
*/
#define COMMAND_MISC_EEPROM 0x00
#define COMMAND_MISC_STATE 0x01
#define COMMAND_MISC_INVALIDATE_FLASH 0x02
#define COMMAND_MISC_QUEUE_ACTION 0x03
#define COMMAND_MISC_PROGRAM 0x04
#define COMMAND_MISC_INTERRUPT 0x05
#define COMMAND_MISC_RAM 0x06
#define COMMAND_MISC_REGISTER 0x07
#define COMMAND_MISC_CLOCK_RECALCULATE 0x08
#define COMMAND_MISC_QUEUE_EVENT 0x09
#define COMMAND_MISC_RESTART_CONFIG 0x0A
/*
* Continuing with base commands...
*/
#define COMMAND_ERASE_FLASH 0xD3
#define COMMAND_RESET 0xE1
/*
* Byte 2 for COMMAND_RESET
*/
#define COMMAND_RESET_USB 0x01
#define COMMAND_RESET_DEVICE 0x02
#define COMMAND_RESET_DEVICE_DISCONNECT 0x03
#define COMMAND_RESET_TEST_FINISH 0x04
/*
* Continuing with base commands...
*/
#define COMMAND_DONE 0xF1
/*
* Responses from the Harmony
*/
#define RESPONSE_VERSION_DATA 0x20
#define RESPONSE_READ_FLASH_DATA 0x60
#define RESPONSE_IRCAP_DATA 0x90
#define RESPONSE_READ_MISC_DATA 0xC0
#define RESPONSE_DONE 0xF0
#endif
|