/*!

\if MANPAGES
\page dcm2json Convert DICOM file and data set to JSON
\else
\page dcm2json dcm2json: Convert DICOM file and data set to JSON
\endif

\section dcm2json_synopsis SYNOPSIS

\verbatim
dcm2json [options] dcmfile-in [jsonfile-out]
\endverbatim

\section dcm2json_description DESCRIPTION

The \b dcm2json utility converts the contents of a DICOM file (file format or
raw data set) to JSON (JavaScript Object Notation).  The output refers to the
"DICOM JSON Model", which is found in DICOM Part 18 Section F.

If \b dcm2json reads a raw data set (DICOM data without a file format
meta-header), it will attempt to guess the transfer syntax by examining the
first few bytes of the file.  It is not always possible to correctly guess the
transfer syntax and it is better to convert a data set to a file format
whenever possible (using the \b dcmconv utility).  It is also possible to use
the \e -f and <em>-t[ieb]</em> options to force \b dcm2json to read a data set
with a particular transfer syntax.

\section dcm2json_parameters PARAMETERS

\verbatim
dcmfile-in   DICOM input filename to be converted ("-" for stdin)

jsonfile-out JSON output filename (default: stdout)
\endverbatim

\section dcm2json_options OPTIONS

\subsection dcm2json_general_options general options
\verbatim
  -h   --help
         print this help text and exit

       --version
         print version information and exit

       --arguments
         print expanded command line arguments

  -q   --quiet
         quiet mode, print no warnings and errors

  -v   --verbose
         verbose mode, print processing details

  -d   --debug
         debug mode, print debug information

  -ll  --log-level  [l]evel: string constant
         (fatal, error, warn, info, debug, trace)
         use level l for the logger

  -lc  --log-config  [f]ilename: string
         use config file f for the logger
\endverbatim

\subsection dcm2json_input_options input options
\verbatim
input file format:

  +f   --read-file
         read file format or data set (default)

  +fo  --read-file-only
         read file format only

  -f   --read-dataset
         read data set without file meta information

input transfer syntax:

  -t=  --read-xfer-auto
         use TS recognition (default)

  -td  --read-xfer-detect
         ignore TS specified in the file meta header

  -te  --read-xfer-little
         read with explicit VR little endian TS

  -tb  --read-xfer-big
         read with explicit VR big endian TS

  -ti  --read-xfer-implicit
         read with implicit VR little endian TS
\endverbatim

\subsection dcm2json_processing_options processing options
\verbatim
encoding of infinity and not-a-number:

  -es  --encode-strict
         report error for 'inf' and 'nan' (default)

  -ee  --encode-extended
         permit 'inf' and 'nan' in JSON numbers

encoding of IS and DS (integer/decimal string) elements:

  -ia  --is-ds-auto
         encode as number if valid, as string otherwise (default)

  -in  --is-ds-num
         always encode as number, fail if invalid

  -is  --is-ds-string
         always encode as string
\endverbatim

\subsection dcm2json_output_options output options
\verbatim
output format:

  +fc  --formatted-code
         enable whitespace formatting (default)

         # prints additional spaces and newlines for increased
         # readability

  -fc  --compact-code
         print only required characters

  +m   --write-meta
         write data set with meta information
         (warning: not conforming to the DICOM standard)
\endverbatim

\section dcm2json_json_format JSON Format

The basic structure of the JSON output created from a DICOM file looks like
the following (see DICOM Part 18 Section F for details):

\verbatim
{
    "00080005": {
        "vr": "CS",
        "Value": [
            "ISO_IR 192"
        ]
    },
    "00080020": {
        "vr": "DT",
        "Value": [
            "20130409"
        ]
    },
    "00080030": {
        "vr": "TM",
        "Value": [
            "131600.0000"
        ]
    },
    "00080050": {
        "vr": "SH",
        "Value": [
            "11235813"
        ]
    },
    "00080056": {
        "vr": "CS",
        "Value": [
            "ONLINE"
        ]
    },
    "00080061": {
        "vr": "CS",
        "Value": [
            "CT",
            "PET"
        ]
    },
    "00080090": {
        "vr": "PN",
        "Value": [
          {
            "Alphabetic": "^Bob^^Dr."
          }
        ]
    },
    "00081190": {
        "vr": "UR",
        "Value": [
            "http://wado.nema.org/studies/
            1.2.392.200036.9116.2.2.2.1762893313.1029997326.945873"
        ]
    },
    "00090010": {
        "vr": "LO",
        "Value": [
            "Vendor A"
        ]
    },
    "00091002": {
        "vr": "UN",
        "InlineBinary": "z0x9c8v7"
    },
    "00100010": {
        "vr": "PN",
        "Value": [
          {
            "Alphabetic": "Wang^XiaoDong"
          }
        ]
    },
    "00100020": {
        "vr": "LO",
        "Value": [
            "12345"
        ]
    },
    "00100021": {
        "vr": "LO",
        "Value": [
            "Hospital A"
        ]
    },
    "00100030": {
        "vr": "DA",
        "Value": [
            "19670701"
        ]
    },
    "00100040": {
        "vr": "CS",
        "Value": [
            "M"
        ]
    },
    "00101002": {
        "vr": "SQ",
        "Value": [
            {
                "00100020": {
                    "vr": "LO",
                    "Value": [
                        "54321"
                    ]
                },
                "00100021": {
                    "vr": "LO",
                    "Value": [
                        "Hospital B"
                    ]
                }
            },
            {
                "00100020": {
                    "vr": "LO",
                    "Value": [
                        "24680"
                    ]
                },
                "00100021": {
                    "vr": "LO",
                    "Value": [
                        "Hospital C"
                    ]
                }
            }
        ]
    },
    "0020000D": {
        "vr": "UI",
        "Value": [
            "1.2.392.200036.9116.2.2.2.1762893313.1029997326.945873"
        ]
    },
    "00200010": {
        "vr": "SH",
        "Value": [
            "11235813"
        ]
    },
    "00201206": {
        "vr": "IS",
        "Value": [
            4
        ]
    },
    "00201208": {
        "vr": "IS",
        "Value": [
            942
        ]
    }
}
\endverbatim

\subsection dcm2json_bulk_data Bulk Data

Binary data, i.e. DICOM element values with Value Representations (VR) of OB
or OW, as well as OD, OF, OL, OV and UN values are always written as
"InlineBinary" (base64 encoding) to the JSON output.  A future version of this
tool might optionally use a "BulkDataURI" instead, i.e. the WADO-RS URL of a
bulk data item that contains the element value.  This would be particularly
useful for large amounts of data, such as pixel data.

\section dcm2json_notes NOTES

\subsection dcm2json_numbers_as_strings Numbers as Strings

The DICOM standard allows certain numeric DICOM value representations, DS, IS,
SV and UV, to be converted either to a JSON number or a JSON string.
\b dcm2json converts DS and IS values to JSON numbers if they are valid decimal
strings or integer strings, and to strings if they contain any illegal
character.  \b dcm2json converts SV and UV values to numbers if they are not
larger than 9007199254740991ll or smaller than -9007199254740991ll, and to
strings otherwise.  While the JSON specification permits larger numbers, these
are the largest integers that JavaScript can handle.  Therefore, many JSON
parsers cannot process larger numbers.

\subsection dcm2json_character_encoding Character Encoding

As required by the DICOM JSON encoding, \b dcm2json always creates output in
Unicode UTF-8 encoding and converts DICOM datasets accordingly.  If this is not
possible, for example because DCMTK has been compiled without character set
conversion support, an error is returned.

\section dcm2json_logging LOGGING

The level of logging output of the various command line tools and underlying
libraries can be specified by the user.  By default, only errors and warnings
are written to the standard error stream.  Using option \e --verbose also
informational messages like processing details are reported.  Option
\e --debug can be used to get more details on the internal activity, e.g. for
debugging purposes.  Other logging levels can be selected using option
\e --log-level.  In \e --quiet mode only fatal errors are reported.  In such
very severe error events, the application will usually terminate.  For more
details on the different logging levels, see documentation of module "oflog".

In case the logging output should be written to file (optionally with logfile
rotation), to syslog (Unix) or the event log (Windows) option \e --log-config
can be used.  This configuration file also allows for directing only certain
messages to a particular output stream and for filtering certain messages
based on the module or application where they are generated.  An example
configuration file is provided in <em>\<etcdir\>/logger.cfg</em>.

\section dcm2json_command_line COMMAND LINE

All command line tools use the following notation for parameters: square
brackets enclose optional values (0-1), three trailing dots indicate that
multiple values are allowed (1-n), a combination of both means 0 to n values.

Command line options are distinguished from parameters by a leading '+' or '-'
sign, respectively.  Usually, order and position of command line options are
arbitrary (i.e. they can appear anywhere).  However, if options are mutually
exclusive the rightmost appearance is used.  This behavior conforms to the
standard evaluation rules of common Unix shells.

In addition, one or more command files can be specified using an '@' sign as a
prefix to the filename (e.g. <em>\@command.txt</em>).  Such a command argument
is replaced by the content of the corresponding text file (multiple
whitespaces are treated as a single separator unless they appear between two
quotation marks) prior to any further evaluation.  Please note that a command
file cannot contain another command file.  This simple but effective approach
allows one to summarize common combinations of options/parameters and avoids
longish and confusing command lines (an example is provided in file
<em>\<datadir\>/dumppat.txt</em>).

\section dcm2json_exit_codes EXIT CODES

The \b dcm2json utility uses the following exit codes when terminating.  This
enables the user to check for the reason why the application terminated.

\subsection dcm2json_exit_codes_general general
\verbatim
EXITCODE_NO_ERROR                         0
EXITCODE_COMMANDLINE_SYNTAX_ERROR         1
\endverbatim

\subsection dcm2json_exit_codes_input_file_errors input file errors
\verbatim
EXITCODE_CANNOT_READ_INPUT_FILE          20
EXITCODE_NO_INPUT_FILES                  21
\endverbatim

\subsection dcm2json_exit_codes_output_file_errors output file errors
\verbatim
EXITCODE_CANNOT_WRITE_OUTPUT_FILE        40
\endverbatim

\subsection dcm2json_exit_codes_processing_errors processing errors
\verbatim
EXITCODE_CANNOT_CONVERT_TO_UNICODE       80
EXITCODE_CANNOT_WRITE_VALID_JSON         81
\endverbatim

\section dcm2json_environment ENVIRONMENT

The \b dcm2json utility will attempt to load DICOM data dictionaries specified
in the \e DCMDICTPATH environment variable.  By default, i.e. if the
\e DCMDICTPATH environment variable is not set, the file
<em>\<datadir\>/dicom.dic</em> will be loaded unless the dictionary is built
into the application (default for Windows).

The default behavior should be preferred and the \e DCMDICTPATH environment
variable only used when alternative data dictionaries are required.  The
\e DCMDICTPATH environment variable has the same format as the Unix shell
\e PATH variable in that a colon (":") separates entries.  On Windows systems,
a semicolon (";") is used as a separator.  The data dictionary code will
attempt to load each file specified in the \e DCMDICTPATH environment variable.
It is an error if no data dictionary can be loaded.

The \b dcm2json utility will attempt to load character set mapping tables.
This happens when DCMTK was compiled with the oficonv library (which is the
default) and the mapping tables are not built into the library (default when
DCMTK uses shared libraries).

The mapping table files are expected in DCMTK's <em>\<datadir\></em>.
The \e DCMICONVPATH environment variable can be used to specify a different
location.  If a different location is specified, those mapping tables also
replace any built-in tables.

\section dcm2json_copyright COPYRIGHT

Copyright (C) 2016-2024 by OFFIS e.V., Escherweg 2, 26121 Oldenburg, Germany.

*/