//
// *  Derby - Class org.apache.derbyTesting.functionTests.util.Derby3980DeadlockTest.policy
// *  
// * Licensed to the Apache Software Foundation (ASF) under one
// * or more contributor license agreements.  See the NOTICE file
// * distributed with this work for additional information
// * regarding copyright ownership.  The ASF licenses this file
// * to you under the Apache License, Version 2.0 (the
// * "License"); you may not use this file except in compliance
// * with the License.  You may obtain a copy of the License at
// *
// *   http://www.apache.org/licenses/LICENSE-2.0
// *
// * Unless required by applicable law or agreed to in writing,
// * software distributed under the License is distributed on an
// * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
// * KIND, either express or implied.  See the License for the
// * specific language governing permissions and limitations
// * under the License.
// *

//
// Policy file with minimal set of permissions to run derby's
// functional tests.
//
// The test harness sets up four variables used by this policy file
//
// derbyTesting.codejar - URL to the jar files when they are in the classpath
// derbyTesting.codeclasses - URL to the classes directory when it is in the classpath
//
// Only one of derbyTesting.codejar and derbyTesting.codeclasses will be valid, the
// other will be set to a bogus URL like file://unused
//
// derbyTesting.codedir - File location of either derbyTesting.codejar or derbyTesting.codeclasses.
// Only required due to a BUG (see below for more info).
//
// derbyTesting.jaxpjar - URL to the jar file containing the JAXP implementation
//     for XML-based tests (ex. lang/XMLBindingTest.java).
//
// derbyTesting.serverhost - Host name or ip where network server is started 
// derbyTesting.clienthost - specifies the clients ip address/hostName. 
//     when testing with networkserver on a remote host, this needs to be passed in 
//     with the NetworkServerControl start command

//
// Permissions for the embedded engine (derby.jar)
//
grant codeBase "${derbyTesting.codejar}derby.jar" {
  permission java.util.PropertyPermission "derby.*", "read";
  permission java.util.PropertyPermission "derby.storage.jvmInstanceId", 
      "write"; 
  // The next two properties are used to determine if the VM is 32 or 64 bit.
  permission java.util.PropertyPermission "sun.arch.data.model", "read";
  permission java.util.PropertyPermission "os.arch", "read";
  permission java.util.PropertyPermission "java.class.path", "read";//sysinfo
  permission java.util.PropertyPermission "java.runtime.version", "read";//sysinfo
  permission java.util.PropertyPermission "java.fullversion", "read";//sysinfo
  permission org.apache.derby.security.SystemPermission "engine", "usederbyinternals";
  
  // unit tests (e.g. store/T_RecoverFullLog) set this property 
  // (called from derbyTesting.jar through code in derby.jar)
  permission java.util.PropertyPermission "derbyTesting.unittest.*", "write";

  permission java.lang.RuntimePermission "createClassLoader";

  // getProtectionDomain is an optional permission needed for printing classpath
  // information to derby.log
  permission java.lang.RuntimePermission "getProtectionDomain";

  // permissions so that we can set the context class loader to
  // null for daemon threads to avoid class loader leak.
  // DERBY-3745
  permission java.lang.RuntimePermission "getClassLoader";
  permission java.lang.RuntimePermission "setContextClassLoader";

  permission java.security.SecurityPermission "getPolicy";
  
  permission java.io.FilePermission "${derby.system.home}${/}derby.properties", "read";
  permission java.io.FilePermission "${derby.system.home}${/}derby.log", "read, write, delete";
  // [DERBY-2000] The write permission was added to allow creation of the
  // derby.system.home directory when running tests under a security manager.
  permission java.io.FilePermission "${derby.system.home}", "read, write";
  
  // all databases under derby.system.home 
  permission java.io.FilePermission "${derby.system.home}${/}-", "read, write, delete";

  // Add permission
  permission java.io.FilePermission "${user.dir}${/}-", "read, write, delete";
  // Import/export and other support files from these locations in tests
  permission java.io.FilePermission "${user.dir}${/}extin${/}-", "read";
  permission java.io.FilePermission "${user.dir}${/}extinout${/}-", "read,  write, delete";
  permission java.io.FilePermission "${user.dir}${/}extout${/}-", "read,write";
  permission java.io.FilePermission "${user.dir}${/}extinout", "read,write";
  
  // These permissions are needed to load the JCE for encryption with Sun and IBM JDK131.
  // JDK14 has the JCE  preloaded
  permission java.security.SecurityPermission "insertProvider.SunJCE";
  permission java.security.SecurityPermission "insertProvider.IBMJCE";
  
//
// Permissions needed for JMX based management and monitoring, which is only
// available for JVMs supporting "platform management", that is J2SE 5.0 or better.
//
// Allows this code to create an MBeanServer:
//
  permission javax.management.MBeanServerPermission "createMBeanServer";
//
// Allows access to Derby's built-in MBeans, within the domain org.apache.derby.
// Derby must be allowed to register and unregister these MBeans.
// To fine tune this permission, see the javadoc of javax.management.MBeanPermission
// or the JMX Instrumentation and Agent Specification.
//
  permission javax.management.MBeanPermission "org.apache.derby.*#[org.apache.derby:*]","registerMBean,unregisterMBean";
//
// Trusts Derby code to be a source of MBeans and to register these in the MBean server.
//
  permission javax.management.MBeanTrustPermission "register";

  // Gives permission for jmx to be used against Derby but
  // only if JMX authentication is not being used.
  // In that case the application would need to create
  // a whole set of fine-grained permissions to allow specific
  // users access to MBeans and actions they perform.
  permission org.apache.derby.security.SystemPermission "jmx", "control";
  permission org.apache.derby.security.SystemPermission "engine", "monitor";
  permission org.apache.derby.security.SystemPermission "server", "monitor";  
 
  // These permissions are needed by AssertFailure to dump the thread stack
  // traces upon failure.
  permission java.lang.RuntimePermission "getStackTrace";
  permission java.lang.RuntimePermission "modifyThreadGroup";
};

//
// Permissions for the network server (derbynet.jar)
//
grant codeBase "${derbyTesting.codejar}derbynet.jar" {
  permission java.util.PropertyPermission "java.class.path", "read";//sysinfo
  permission java.util.PropertyPermission "java.runtime.version", "read";//sysinfo
  permission java.util.PropertyPermission "java.fullversion", "read";//sysinfo
  permission org.apache.derby.security.SystemPermission "engine", "usederbyinternals";
  
  // accept is needed for the server accepting connections
  // connect is needed for ping command (which is in the server jar)
  // listen is needed for the server listening on the network port
  permission java.net.SocketPermission "127.0.0.1", "accept,connect";
  permission java.net.SocketPermission "localhost", "accept,connect,listen";
  permission java.net.SocketPermission "${derbyTesting.clienthost}", "accept,connect";
  permission java.net.SocketPermission "${derbyTesting.serverhost}", "accept,connect";

  // Need to be able to write to trace file for NetworkServerControlApiTest
  permission java.io.FilePermission "${user.dir}${/}system${/}trace", "write"; 
  permission java.io.FilePermission "${user.dir}${/}system${/}trace${/}-", "write"; 
    // Needed for NetworkServerMBean access (see JMX section above)
  permission org.apache.derby.security.SystemPermission "server", "control,monitor";
  
};

//
// Permissions for the network client (derbyclient.jar)
//
grant codeBase "${derbyTesting.clientjar}derbyclient.jar" {
  permission java.net.SocketPermission "127.0.0.1", "connect,resolve";
  permission java.net.SocketPermission "localhost", "connect,resolve";
  permission java.net.SocketPermission "${derbyTesting.serverhost}", "connect,resolve";

  // DERBY-1883: Since some classes that are included in both derby.jar and
  // derbyclient.jar read properties, derbyclient.jar needs permission to read
  // derby.* properties to avoid failures when it is listed before derby.jar in
  // the classpath.
  permission java.util.PropertyPermission "derby.*", "read";

  // DERBY-2302: derbyclient.jar needs to be able to read the user.dir property in order to
  // do tracing in that directory. Also, it needs read/write permissions in user.dir in order
  // to create the trace files in that directory.
  permission java.util.PropertyPermission "user.dir", "read";
  permission java.io.FilePermission "${user.dir}${/}-", "read, write"; 
  
  // These permissions are needed by AssertFailure to dump the thread stack
  // traces upon failure.
  permission java.lang.RuntimePermission "getStackTrace";
  permission java.lang.RuntimePermission "modifyThreadGroup";

};

//
// Permissions for the tools (derbytools.jar)
// Ideally this would be more secure, for now the
// focus is on getting the engine & network server secure.
//
grant codeBase "${derbyTesting.codejar}derbytools.jar" {
  // Access all properties using System.getProperties -
  // ij enumerates the properties in order to open connections
  // for any property set in ij.connection.* and set protocols
  // for any property in ij.protocol.*
  permission java.util.PropertyPermission "*", "read, write";
  
  // Read all files under ${user.dir}
  permission java.io.FilePermission "${user.dir}${/}-", "read";
  
  // IjTestCases read, write, and delete ij's output in the extinout dir
  permission java.io.FilePermission "${user.dir}${/}extinout${/}-", "read, write, delete";
 
  // ij needs permission to read the sql files in this jar
  permission java.io.FilePermission "${derbyTesting.testjarpath}", "read";
  
};

//
// Permissions for the tests (derbyTesting.jar)
// We are liberal here, it's not a goal to make the test harness
// or tests secure.
//
grant codeBase "${derbyTesting.testjar}derbyTesting.jar" {
  // Access all properties using System.getProperties
  permission java.util.PropertyPermission "*", "read, write";
  
  //Need to read and delete file for user.dir (Derby3980DeadlockTest)
  permission java.io.FilePermission "${user.dir}", "read"; 
  permission java.io.FilePermission "${user.dir}${/}*.txt", "read,write,delete";
  // Access all files under ${user.dir}to write the test directory structure
  permission java.io.FilePermission "${user.dir}${/}-", "read,write,delete"; 

  // When running with useprocess=false need to install and uninstall
  // the security manager and allow setIO to change the system err and out
  // streams. Currently the nist suite runs with useprocess=false.
  permission java.lang.RuntimePermission "setSecurityManager";
  permission java.security.SecurityPermission "getPolicy";
  permission java.lang.RuntimePermission "setIO";  

  // These permissions are needed to dump the thread stack
  // traces upon failure.
  permission java.lang.RuntimePermission "getStackTrace";
  permission java.lang.RuntimePermission "modifyThreadGroup";
  
  // Allow MBeanTest to register the application management MBean.
  permission javax.management.MBeanServerPermission "createMBeanServer";
  permission javax.management.MBeanPermission "org.apache.derby.mbeans.Management#[org.apache.derby:type=Management]","registerMBean,unregisterMBean";
  permission javax.management.MBeanPermission "org.apache.derby.mbeans.Management#-[-]", "instantiate";
  permission javax.management.MBeanTrustPermission "register";
   
  // And to find and use Derby's MBeans
  permission javax.management.MBeanPermission "org.apache.derby.mbeans.*#[org.apache.derby:*]", "getAttribute,invoke";
  permission javax.management.MBeanPermission "org.apache.derby.mbeans.*#-[org.apache.derby:*]", "getMBeanInfo";
  permission javax.management.MBeanPermission "-#-[-]", "queryNames";
  permission javax.management.MBeanPermission "org.apache.derby.mbeans.*#-[org.apache.derby:*]", "queryNames";
  
  // Test code needs this as well for the platform MBeanServer
  // tests where the testing code is in the stack frame.
  permission org.apache.derby.security.SystemPermission "jmx", "control";
  permission org.apache.derby.security.SystemPermission "engine", "monitor";
  permission org.apache.derby.security.SystemPermission "server", "control,monitor";

  // Needed by NetworkServerTestSetup when probing ports.
  permission java.net.SocketPermission "localhost", "listen";
};

//
// super-set of the jar permissions for running out of the classes directory
//
grant codeBase "${derbyTesting.codeclasses}" {
  // Access all properties using System.getProperties
  permission java.util.PropertyPermission "*", "read, write";
  
  permission java.util.PropertyPermission "derby.*", "read";
  permission java.lang.RuntimePermission "createClassLoader";

  // permissions so that we can set the context class loader to
  // null for daemon threads to avoid class loader leak.
  // DERBY-3745
  permission java.lang.RuntimePermission "getClassLoader";
  permission java.lang.RuntimePermission "setContextClassLoader";

  permission java.security.SecurityPermission "getPolicy";
   
  permission java.io.FilePermission "${derby.system.home}${/}derby.properties", "read";
  permission java.io.FilePermission "${derby.system.home}${/}derby.log", "read, write, delete";
  permission java.io.FilePermission "${derby.system.home}", "read";
  permission java.io.FilePermission "${derby.system.home}${/}-", "read, write, delete";

  //Need to read and delete file for user.dir (Derby3980DeadlockTest)
  permission java.io.FilePermission "${user.dir}", "read"; 
  permission java.io.FilePermission "${user.dir}${/}*.txt", "read,write,delete";
  // Access all files under ${user.dir}to write the test directory structure
  permission java.io.FilePermission "${user.dir}${/}-", "read,write,delete"; 

  // combination of client and server side.
  permission java.net.SocketPermission "127.0.0.1", "accept,connect,resolve";
  permission java.net.SocketPermission "localhost", "accept,connect,resolve,listen";
  permission java.net.SocketPermission "${derbyTesting.clienthost}", "accept,connect";
  permission java.net.SocketPermission "${derbyTesting.serverhost}", "connect,resolve";
  
  // Access all files under ${user.dir}to write the test directory structure
  // Also covers extin, extout and extinout locations
  permission java.io.FilePermission "${user.dir}${/}-", "read,write,delete"; 
    
  // These permissions are needed to load the JCE for encryption with Sun and IBM JDK131.
  // JDK14 has the JCE  preloaded
  permission java.security.SecurityPermission "insertProvider.SunJCE";
  permission java.security.SecurityPermission "insertProvider.IBMJCE";

  // When running with useprocess=false need to install and uninstall
  // the security manager and allow setIO to change the system err and out
  // streams. Currently the nist suite runs with useprocess=false.
  permission java.lang.RuntimePermission "setSecurityManager";
  permission java.lang.RuntimePermission "setIO"; 

  // These permissions are needed by stress.multi to dump the thread stack
  // traces upon failure.
  permission java.lang.RuntimePermission "getStackTrace";
  permission java.lang.RuntimePermission "modifyThreadGroup";
  
    // Allow MBeanTest to register the application management MBean.
  permission javax.management.MBeanServerPermission "createMBeanServer";
  permission javax.management.MBeanPermission "org.apache.derby.mbeans.Management#[org.apache.derby:type=Management]","registerMBean,unregisterMBean";
  permission javax.management.MBeanPermission "org.apache.derby.mbeans.Management#-[-]", "instantiate";
  permission javax.management.MBeanTrustPermission "register";
  
  // Allows access to Derby's built-in MBeans, within the domain org.apache.derby.
  permission javax.management.MBeanPermission "org.apache.derby.*#[org.apache.derby:*]","registerMBean,unregisterMBean";
  
   
  // And to find and use Derby's MBeans
  permission javax.management.MBeanPermission "org.apache.derby.mbeans.*#[org.apache.derby:*]", "getAttribute,invoke";
  permission javax.management.MBeanPermission "org.apache.derby.mbeans.*#-[org.apache.derby:*]", "getMBeanInfo";
  permission javax.management.MBeanPermission "-#-[-]", "queryNames";
  permission javax.management.MBeanPermission "org.apache.derby.mbeans.*#-[org.apache.derby:*]", "queryNames";
  
  // Test code needs this as well for the platform MBeanServer
  // tests where the testing code is in the stack frame.
  permission org.apache.derby.security.SystemPermission "jmx", "control";
  permission org.apache.derby.security.SystemPermission "engine", "monitor";
  permission org.apache.derby.security.SystemPermission "server", "control,monitor";

  permission org.apache.derby.security.SystemPermission "engine", "usederbyinternals";
};

// JUnit jar file tries to read junit.properties in the user's
// home directory and seems to require permission to read the
// property user.home as well.
// junit.swingui.TestRunner writes to .junitsession on exit.
grant codeBase "${derbyTesting.junit}" {
    permission java.util.PropertyPermission "user.home", "read";
    permission java.io.FilePermission "${user.home}${/}junit.properties", "read";
    permission java.io.FilePermission "${user.home}${/}.junitsession", "write";

    // This permission is needed when running the tests using ant 1.7
    permission java.io.FilePermission "${user.dir}${/}-", "read, write, delete";
};

// Due to a problem running tests/derbynet/CompatibilityTest in the old test
// harness, permission to read junit.properties is granted to all. This can be 
// removed when CompatibilityTest is rewritten to conform to our current Junit
// usage. See DERBY-2076.
grant {
    permission java.io.FilePermission "${user.home}${/}junit.properties", "read";
};

// Ant's junit runner requires setOut to redirect the System output streams
// to the forked JVM used when running junit tests inside Ant. Ant requires
// forking the JVM if you want to run tests in a different directory than the
// current one.
grant codeBase "${derbyTesting.antjunit}" {
    permission java.lang.RuntimePermission "setIO";

    // This permission is needed when running the tests using ant 1.7
    permission java.io.FilePermission "${user.dir}${/}*", "write";
};

// functionTests.tests.lang.RoutineSecurityTest requires this grant
// to check to see if permissions are granted through generated code
// through this mechanism.
grant {
    permission java.util.PropertyPermission "derbyRoutineSecurityTest.yes", "read";
};

// These permissions are needed when testing code instrumented with EMMA.
// They will only be used if the emma.active system property property is
// set, which should be set to "" for the permissions to be correct. Must
// be granted to all code bases because EMMA doesn't use doPrivileged
// blocks around the code that needs the permissions.
grant {
  permission java.util.PropertyPermission "${emma.active}user.dir", "read";
  permission java.io.FilePermission "${emma.active}${user.dir}${/}coverage.ec", "read, write";
  permission java.lang.RuntimePermission "${emma.active}writeFileDescriptor";
};

// Grant the required permissions for JaCoCo (code coverage tool).
grant {
  permission java.io.FilePermission "${jacoco.active}${user.dir}${/}*", "read, write";
};

// When inserting XML values that use external DTD's, the JAXP parser
// needs permission to read the DTD files.  We assume that all DTD
// files will be copied to extin/ by whichever tests need them.  So
// grant the JAXP parser permissions to read that directory.
grant codeBase "${derbyTesting.jaxpjar}" {
  permission java.io.FilePermission "${user.dir}${/}extin${/}-", "read";
};

// Permissions for package-private tests run from 'classes.pptesting'
grant codeBase "${derbyTesting.ppcodeclasses}" {

  // Needed for ProtocolTest - allows connection to a server
  permission java.net.SocketPermission "127.0.0.1", "connect,resolve";
  permission java.net.SocketPermission "localhost", "connect,resolve";
  permission java.net.SocketPermission "${derbyTesting.serverhost}", "connect,resolve";

  // Allows reading support files in 'extin'
  permission java.io.FilePermission "${user.dir}${/}extin${/}-", "read";
};