"""
Wrapper around the ``dateutil.rrule`` module.

Provides more consistent behavior with the rfc2445 specification,
notably differing from `dateutil.rrule`` in the handling of the
`dtstart` parameter and the additional handling of a `dtend`
parameter. Also, the `byweekday` parameter in `dateutil.rrule` is
`byday` in this package to reflect the specification. See the `Rule`
and `Recurrence` class documentation for details on the differences.
"""

import re
import datetime
import calendar

import dateutil.rrule
from dateutil import tz

from django.utils import dateformat
from django.utils.timezone import get_current_timezone, is_aware, is_naive, make_aware
from django.utils.translation import gettext as _, pgettext as _p

from recurrence import exceptions
from recurrence import settings

YEARLY, MONTHLY, WEEKLY, DAILY, HOURLY, MINUTELY, SECONDLY = range(7)

(JANUARY, FEBRUARY, MARCH, APRIL, MAY, JUNE, JULY, AUGUST,
 SEPTEMBER, OCTOBER, NOVEMBER, DECEMBER) = range(1, 13)


class Rule:
    """
    A recurrence rule.

    `Rule` is a representation of a rfc2445 `RECUR` type, used in
    the `RRULE` and `EXRULE` properties. More information about the
    `RECUR` type specification can be found in the rfc at
    http://www.ietf.org/rfc/rfc2445.txt.

    An `Rrule` wraps the `dateutil.rrule.rrule` class while adhering
    to the rfc2445 spec. Notably a `dtstart` parameter cannot be
    specified with a `Rule` unlike `dateutil.rrule.rrule` as only one
    `dtstart` can be used with a set of `RRULE` and `EXRULE` rfc2445
    properties, therefore the `Recurrence` class (which is based on
    `dateutil.rrule.rruleset`) accepts a `dtstart` parameter instead.
    `Recurrence` also accepts a `dtend` parameter.

    Documentation is largely sourced from the `dateutil.rrule.rrule`
    documentation at http://labix.org/python-dateutil

    :Variables:
        `freq` : int
            One of the enumerated constants `YEARLY`, `MONTHLY`,
            `WEEKLY`, `DAILY`, `HOURLY`, `MINUTELY`, or `SECONDLY`,
            specifying the base recurring frequency.

        `interval` : int
            The interval between each freq iteration. For example,
            when using YEARLY, an interval of 2 means once every two
            years, but with HOURLY, it means once every two hours. The
            default interval is 1.

        `wkst` : int
            The week start day. Must be one of the `MO`, `TU`, `WE`,
            `TH`, `FR`, `SA`, `SU` constants, or an integer,
            specifying the first day of the week. This will affect
            recurrences based on weekly periods. The default week
            start is got from `calendar.firstweekday()`, and may be
            modified by `calendar.setfirstweekday()`.

        `count` : int
            How many occurrences will be generated by this rule.

        `until` : datetime.datetime
            If given, this must be a `datetime.datetime` instance,
            that will specify the limit of the recurrence. If a
            recurrence instance happens to be the same as the
            `datetime.datetime` instance given in the `until` keyword,
            this will be the last occurrence.

        `bysetpos` : int or sequence
            If given, it must be either an integer, or a sequence of
            integers, positive or negative. Each given integer will
            specify an occurrence number, corresponding to the nth
            occurrence of the rule inside the frequency period. For
            example, a `bysetpos` of `-1` if combined with a `MONTHLY`
            frequency, and a `byday` of `(MO, TU, WE, TH, FR)`, will
            result in the last work day of every month.

        `bymonth` : int or sequence
            If given, it must be either an integer, or a sequence of
            integers, meaning the months to apply the recurrence to.

        `bymonthday` : int or sequence
            If given, it must be either an integer, or a sequence of
            integers, meaning the month days to apply the recurrence
            to.

        `byyearday` : int or sequence
            If given, it must be either an integer, or a sequence of
            integers, meaning the year days to apply the recurrence
            to.

        `byweekno` : int or sequence
            If given, it must be either an integer, or a sequence of
            integers, meaning the week numbers to apply the recurrence
            to. Week numbers have the meaning described in ISO8601,
            that is, the first week of the year is that containing at
            least four days of the new year.

        `byday` : int or sequence
            If given, it must be either an integer `(0 == MO)`, a
            sequence of integers, one of the weekday constants `(MO,
            TU, ...)`, or a sequence of these constants. When given,
            these variables will define the weekdays where the
            recurrence will be applied. It's also possible to use an
            argument n for the weekday instances, which will mean the
            nth occurrence of this weekday in the period. For example,
            with `MONTHLY`, or with `YEARLY` and `BYMONTH`, using
            `FR(1)` in byweekday will specify the first friday of the
            month where the recurrence happens.

        `byhour` : int or sequence
            If given, it must be either an integer, or a sequence of
            integers, meaning the hours to apply the recurrence to.

        `byminute` : int or sequence
            If given, it must be either an integer, or a sequence of
            integers, meaning the minutes to apply the recurrence to.

        `bysecond` : int or sequence
            If given, it must be either an integer, or a sequence of
            integers, meaning the seconds to apply the recurrence to.
    """
    byparams = (
        'bysetpos', 'bymonth', 'bymonthday', 'byyearday',
        'byweekno', 'byday', 'byhour', 'byminute', 'bysecond'
    )
    frequencies = (
        'YEARLY', 'MONTHLY', 'WEEKLY', 'DAILY',
        'HOURLY', 'MINUTELY', 'SECONDLY'
    )
    weekdays = (
        'MO', 'TU', 'WE', 'TH', 'FR', 'SA', 'SU'
    )
    firstweekday = calendar.firstweekday()

    def __init__(
        self, freq,
        interval=1, wkst=None, count=None, until=None, **kwargs
    ):
        """
        Create a new rule.

        See `Rule` class documentation for available `**kwargs` and
        parameter usage.
        """
        self.freq = freq
        self.interval = interval
        self.wkst = wkst
        self.count = count
        self.until = until

        for param in self.byparams:
            if param in kwargs:
                value = kwargs[param]
                if hasattr(value, '__iter__'):
                    value = list(value)
                    if not value:
                        value = []
                elif value is not None:
                    value = [value]
                else:
                    value = []
                setattr(self, param, value)
            else:
                setattr(self, param, [])

    def __hash__(self):
        byparam_values = []
        for param in self.byparams:
            byparam_values.append(param)
            byparam_values.extend(getattr(self, param, []) or [])
        return hash((
            self.freq, self.interval, self.wkst, self.count, self.until,
            tuple(byparam_values)))

    def __eq__(self, other):
        if not isinstance(other, Rule):
            raise TypeError('object to compare must be Rule object')
        return hash(self) == hash(other)

    def __ne__(self, other):
        return not self.__eq__(other)

    def to_text(self, short=False):
        return rule_to_text(self, short)

    def to_dateutil_rrule(self, dtstart=None, dtend=None, cache=False):
        """
        Create a `dateutil.rrule.rrule` instance from this `Rule`.

        :Parameters:
            `dtstart` : datetime.datetime
                The date/time the recurrence rule starts.

            `dtend` : datetime.datetime
                The rule should not yield occurrences past this
                date. Replaces `until` if `until` is greater than
                `dtend`. Note: `dtend` in this case does not count for
                an occurrence itself.

            `cache` : bool
                If given, it must be a boolean value specifying to
                enable or disable caching of results. If you will use
                the same `dateutil.rrule.rrule` instance multiple
                times, enabling caching will improve the performance
                considerably.

        :Returns:
            A `dateutil.rrule.rrule` instance.
        """
        kwargs = dict((p, getattr(self, p) or None) for p in self.byparams)
        # dateutil.rrule renames the parameter 'byweekday' by we're using
        # the parameter name originally specified by rfc2445.
        kwargs['byweekday'] = kwargs.pop('byday')

        until = self.until
        if until:
            until = normalize_offset_awareness(until, dtstart)
            if dtend:
                if until > dtend:
                    until = dtend
        elif dtend:
            until = dtend

        return dateutil.rrule.rrule(
            self.freq, dtstart, self.interval, self.wkst, self.count, until,
            cache=cache, **kwargs)


class Recurrence:
    """
    A combination of `Rule` and `datetime.datetime` instances.

    A `Recurrence` instance provides the combined behavior of the
    rfc2445 `DTSTART`, `DTEND`, `RRULE`, `EXRULE`, `RDATE`, and
    `EXDATE` properties in generating recurring date/times.

    This is a wrapper around the `dateutil.rrule.rruleset` class while
    adhering to the rfc2445 spec. Notably a `dtstart` parameter can be
    given which cascades to all `dateutil.rrule.rrule` instances
    generated by included `Rule` instances. A `dtend` parameter has
    also been included to reflect the `DTEND` rfc2445 parameter.

    :Variables:
        `dtstart` : datetime.datetime
            Optionally specify the first occurrence. This defaults to
            `datetime.datetime.now()` when the occurrence set is
            generated.

        `dtend` : datetime.datetime
            Optionally specify the last occurrence.

        `rrules` : list
            A list of `Rule` instances to include in the recurrence
            set generation.

        `exrules` : list
            A list of `Rule` instances to include in the recurrence
            set exclusion list. Dates which are part of the given
            recurrence rules will not be generated, even if some
            inclusive `Rule` or `datetime.datetime` instances matches
            them.

        `rdates` : list
            A list of `datetime.datetime` instances to include in the
            occurrence set generation.

        `exdates` : list
            A list of `datetime.datetime` instances to exclude in the
            occurrence set generation. Dates included that way will
            not be generated, even if some inclusive `Rule` or
            `datetime.datetime` instances matches them.

        `include_dtstart` : bool
            Defines if `dtstart` is included in the recurrence set as
            the first occurrence. With `include_dtstart == True` it is
            both the starting point for recurrences and the first
            recurrence in the set (according to the rfc2445 spec).
            With `include_dtstart == False` `dtstart` is only the rule's
            starting point like in python's `dateutil.rrule`.
    """
    def __init__(
        self, dtstart=None, dtend=None, rrules=(), exrules=(),
            rdates=(), exdates=(), include_dtstart=True
    ):
        """
        Create a new recurrence.

        Parameters map directly to instance attributes, see
        `Recurrence` class documentation for usage.
        """
        self._cache = {}

        self.dtstart = dtstart
        self.dtend = dtend

        self.rrules = list(rrules)
        self.exrules = list(exrules)
        self.rdates = list(rdates)
        self.exdates = list(exdates)
        self.include_dtstart = include_dtstart

    def __iter__(self):
        return self.occurrences()

    def __str__(self):
        return serialize(self)

    def __hash__(self):
        return hash((
            self.dtstart, self.dtend,
            tuple(self.rrules), tuple(self.exrules),
            tuple(self.rdates), tuple(self.exdates)))

    def __bool__(self):
        if (self.dtstart or self.dtend or
            tuple(self.rrules) or tuple(self.exrules) or
            tuple(self.rdates) or tuple(self.exdates)):
            return True
        else:
            return False

    def __nonzero__(self):
        # Required for Python 2 compatibility
        return type(self).__bool__(self)

    def __eq__(self, other):
        if type(other) != type(self):
            return False
        if not isinstance(other, Recurrence):
            raise TypeError('object to compare must be Recurrence object')
        return hash(self) == hash(other)

    def __ne__(self, other):
        return not self.__eq__(other)

    def occurrences(
        self, dtstart=None, dtend=None, cache=False
    ):
        """
        Get a generator yielding `datetime.datetime` instances in this
        occurrence set.

        :Parameters:
            `dtstart` : datetime.datetime
                Optionally specify the first occurrence of the
                occurrence set. Defaults to `self.dtstart` if specified
                or `datetime.datetime.now()` if not when the
                occurrence set is generated.

            `dtend` : datetime.datetime
                Optionally specify the last occurrence of the
                occurrence set. Defaults to `self.dtend` if specified.

            `cache` : bool
                Whether to cache the occurrence set generator.

        :Returns:
            A sequence of `datetime.datetime` instances.
        """
        return self.to_dateutil_rruleset(dtstart, dtend, cache)

    def count(self, dtstart=None, dtend=None, cache=False):
        """
        Returns the number of occurrences in this occurrence set.

        :Parameters:
            `dtstart` : datetime.datetime
                Optionally specify the first occurrence of the
                occurrence set. Defaults to `self.dtstart` if specified
                or `datetime.datetime.now()` if not when the
                occurrence set is generated.

            `dtend` : datetime.datetime
                Optionally specify the last occurrence of the
                occurrence set. Defaults to `self.dtend` if specified.

            `cache` : bool
                Whether to cache the occurrence set generator.

        :Returns:
            The number of occurrences in this occurrence set.
        """
        return self.to_dateutil_rruleset(dtstart, dtend, cache).count()

    def before(
        self, dt, inc=False,
        dtstart=None, dtend=None, cache=False
    ):
        """
        Returns the last recurrence before the given
        `datetime.datetime` instance.

        :Parameters:
            `dt` : datetime.datetime
                The date to use as the threshold.

            `inc` : bool
                Defines what happens if `dt` is an occurrence. With
                `inc == True`, if `dt` itself is an occurrence, it
                will be returned.

            `dtstart` : datetime.datetime
                Optionally specify the first occurrence of the
                occurrence set. Defaults to `self.dtstart` if specified
                or `datetime.datetime.now()` if not when the
                occurrence set is generated.

            `dtend` : datetime.datetime
                Optionally specify the last occurrence of the
                occurrence set. Defaults to `self.dtend` if specified.

            `cache` : bool
                Whether to cache the occurrence set generator.

        :Returns:
            A `datetime.datetime` instance.
        """
        return self.to_dateutil_rruleset(
            dtstart, dtend, cache).before(dt, inc)

    def after(
        self, dt, inc=False,
        dtstart=None, dtend=None, cache=False
    ):
        """
        Returns the first recurrence after the given
        `datetime.datetime` instance.

        :Parameters:
            `dt` : datetime.datetime
                The date to use as the threshold.

            `inc` : bool
                Defines what happens if `dt` is an occurrence. With
                `inc == True`, if `dt` itself is an occurrence, it
                will be returned.

            `dtstart` : datetime.datetime
                Optionally specify the first occurrence of the
                occurrence set. Defaults to `self.dtstart` if specified
                or `datetime.datetime.now()` if not when the
                occurrence set is generated.

            `dtend` : datetime.datetime
                Optionally specify the last occurrence of the
                occurrence set. Defaults to `self.dtend` if specified.

            `cache` : bool
                Whether to cache the occurrence set generator.

        :Returns:
            A `datetime.datetime` instance.
        """
        return self.to_dateutil_rruleset(dtstart, dtend, cache).after(dt, inc)

    def between(
        self, after, before,
        inc=False, dtstart=None, dtend=None, cache=False
    ):
        """
        Returns the first recurrence after the given
        `datetime.datetime` instance.

        :Parameters:
            `after` : datetime.datetime
                Return dates after this date.

            `before` : datetime.datetime
                Return dates before this date.

            `inc` : bool
                Defines what happens if `after` and/or `before` are
                themselves occurrences. With `inc == True`, they will
                be included in the list, if they are found in the
                occurrence set.

            `dtstart` : datetime.datetime
                Optionally specify the first occurrence of the
                occurrence set. Defaults to `self.dtstart` if specified
                or `datetime.datetime.now()` if not when the
                occurrence set is generated.

            `dtend` : datetime.datetime
                Optionally specify the last occurrence of the
                occurrence set. Defaults to `self.dtend` if specified.

            `cache` : bool
                Whether to cache the occurrence set generator.

        :Returns:
            A sequence of `datetime.datetime` instances.
        """
        return self.to_dateutil_rruleset(
            dtstart, dtend, cache).between(after, before, inc)

    def to_dateutil_rruleset(self, dtstart=None, dtend=None, cache=False):
        """
        Create a `dateutil.rrule.rruleset` instance from this
        `Recurrence`.

        :Parameters:
            `dtstart` : datetime.datetime
                The date/time the recurrence rule starts. This value
                overrides the `dtstart` property specified by the
                `Recurrence` instance if its set.

            `dtstart` : datetime.datetime
                Optionally specify the first occurrence of the
                occurrence set. Defaults to `self.dtstart` if specified
                or `datetime.datetime.now()` if not when the
                occurrence set is generated.

            `cache` : bool
                If given, it must be a boolean value specifying to
                enable or disable caching of results. If you will use
                the same `dateutil.rrule.rrule` instance multiple
                times, enabling caching will improve the performance
                considerably.

        :Returns:
            A `dateutil.rrule.rruleset` instance.
        """
        # all datetimes used in dateutil.rrule objects will need to be
        # normalized to either offset-aware or offset-naive datetimes
        # to avoid exceptions. dateutil will use the tzinfo from the
        # given dtstart, which will cascade to other datetime objects.

        dtstart = dtstart or self.dtstart
        dtend = dtend or self.dtend
        include_dtstart = self.include_dtstart

        if dtend:
            dtend = normalize_offset_awareness(dtend or self.dtend, dtstart)

        if cache:
            # we need to cache an instance for each unique dtstart
            # value because the occurrence values will differ.
            cached = self._cache.get(dtstart)
            if cached:
                return cached

        rruleset = dateutil.rrule.rruleset(cache=cache)

        for rrule in self.rrules:
            rruleset.rrule(rrule.to_dateutil_rrule(dtstart, dtend, cache))
        for exrule in self.exrules:
            rruleset.exrule(exrule.to_dateutil_rrule(dtstart, dtend, cache))

        if include_dtstart and dtstart is not None:
            rruleset.rdate(dtstart)
        for rdate in self.rdates:
            rdate = normalize_offset_awareness(rdate, dtstart)
            if dtend is not None and rdate < dtend:
                rruleset.rdate(rdate)
            elif not dtend:
                rruleset.rdate(rdate)
        if dtend is not None:
            rruleset.rdate(dtend)

        for exdate in self.exdates:
            exdate = normalize_offset_awareness(exdate, dtstart)
            if dtend is not None and exdate < dtend:
                rruleset.exdate(exdate)
            elif not dtend:
                rruleset.exdate(exdate)

        if cache:
            self._cache[dtstart] = rruleset

        return rruleset


class Weekday:
    """
    Representation of a weekday.

    A `Weekday` is essentially an integer from 0 to 6, with an
    optional `index` which indicates its position in a month. For
    example, an `number` of 6 and an `index` of ``-1`` means the last
    sunday of the month. Weekday's with a specific index can be
    created by calling the existing `MO`, `TU`, `WE`, `TH`, `FR`,
    `SA`, `SU` constants::

        >>> SU(-1)
        -1SU

    `Weekday` objects have a smart equality test that can compare
    integers, other `Weekday` objects, and string constants as defined
    by rfc2445, such as '-1SU'.
    """
    def __init__(self, number, index=None):
        """
        Create a new weekday constant.

        :Parameters:
            `number` : int
                A number in `range(7)`.
            `index` : int
                An integer specifying the weekday's position in the
                month. A value of ``None`` or ``0`` means the index is
                ambiguous and represents all weekdays of that number.
        """
        int(number)

        if number > 6:
            raise ValueError('number must be in range(7)')
        self.number = number
        self.index = index

    def __call__(self, index):
        if index == self.index:
            return self
        else:
            return Weekday(self.number, index)

    def __hash__(self):
        if self.index:
            return hash((self.number, self.index))
        else:
            return hash(self.number)

    def __eq__(self, other):
        other = to_weekday(other)
        return (self.number, self.index) == (other.number, other.index)

    def __repr__(self):
        if self.index:
            return '%s%s' % (self.index, Rule.weekdays[self.number])
        else:
            return Rule.weekdays[self.number]

    weekday = property(lambda self: self.number)
    n = property(lambda self: self.index)


MONDAY, TUESDAY, WEDNESDAY, THURSDAY, FRIDAY, SATURDAY, SUNDAY = (
    MO, TU, WE, TH, FR, SA, SU) = WEEKDAYS = list(map(lambda n: Weekday(n), range(7)))


def to_utc(dt):
    if not dt:
        return dt

    if is_naive(dt):
        dt = make_aware(dt)
    dt = dt.astimezone(tz.UTC)
    return dt


def to_weekday(token):
    """
    Attempt to convert an object to a `Weekday` constant.

    :Parameters:
        `token` : str, int, dateutil.rrule.weekday or `Weekday`
            Can be values such as `MO`, `SU(-2)`, `"-2SU"`, or an
            integer like `1` for Tuesday. dateutil.rrule.weekday`
            are returned unchanged.

    :Returns:
        A `dateutil.rrule.weekday` instance.
    """
    if isinstance(token, Weekday):
        return token
    if isinstance(token, dateutil.rrule.weekday):
        return Weekday(token.weekday, token.n)
    if isinstance(token, int):
        if token > 6:
            raise ValueError
        return WEEKDAYS[token]
    elif not token:
        raise ValueError
    elif isinstance(token, str) and token.isdigit():
        if int(token) > 6:
            raise ValueError
        return WEEKDAYS[int(token)]
    elif isinstance(token, str):
        const = token[-2:].upper()
        if const not in Rule.weekdays:
            raise ValueError
        nth = token[:-2]
        if not nth:
            return Weekday(list(Rule.weekdays).index(const))
        else:
            return Weekday(list(Rule.weekdays).index(const), int(nth))


def validate(rule_or_recurrence):
    if isinstance(rule_or_recurrence, Rule):
        obj = Recurrence(rrules=[rule_or_recurrence])
    else:
        obj = rule_or_recurrence
    try:
        if not isinstance(obj, Rule) and not isinstance(obj, Recurrence):
            raise exceptions.ValidationError('incompatible object')
    except TypeError:
        raise exceptions.ValidationError('incompatible object')

    def validate_dt(dt):
        if not isinstance(dt, datetime.datetime):
            raise exceptions.ValidationError('invalid datetime: %r' % dt)

    def validate_iterable(rule, param):
        try:
            [v for v in getattr(rule, param, []) if v]
        except TypeError:
            # TODO: I'm not sure it's possible to get here - all the
            # places we call validate_iterable convert single ints to
            # sequences, and other types raise TypeErrors earlier.
            raise exceptions.ValidationError(
                '%s parameter must be iterable' % param)

    def validate_iterable_ints(rule, param, min_value=None, max_value=None):
        for value in getattr(rule, param, []):
            try:
                value = int(value)
                if min_value is not None:
                    if value < min_value:
                        raise ValueError
                if max_value is not None:
                    if value > max_value:
                        raise ValueError
            except ValueError:
                raise exceptions.ValidationError(
                    'invalid %s parameter: %r' % (param, value))

    def validate_rule(rule):
        # validate freq
        try:
            Rule.frequencies[int(rule.freq)]
        except IndexError:
            raise exceptions.ValidationError(
                'invalid freq parameter: %r' % rule.freq)
        except ValueError:
            raise exceptions.ValidationError(
                'invalid freq parameter: %r' % rule.freq)

        # validate interval
        try:
            interval = int(rule.interval)
            if interval < 1:
                raise ValueError
        except ValueError:
            raise exceptions.ValidationError(
                'invalid interval parameter: %r' % rule.interval)

        # validate wkst
        if rule.wkst:
            try:
                to_weekday(rule.wkst)
            except ValueError:
                raise exceptions.ValidationError(
                    'invalide wkst parameter: %r' % rule.wkst)

        # validate until
        if rule.until:
            try:
                validate_dt(rule.until)
            except ValueError:
                # TODO: I'm not sure it's possible to get here
                # (validate_dt doesn't raise ValueError)
                raise exceptions.ValidationError(
                    'invalid until parameter: %r' % rule.until)

        # validate count
        if rule.count:
            try:
                int(rule.count)
            except ValueError:
                raise exceptions.ValidationError(
                    'invalid count parameter: %r' % rule.count)

        # TODO: Should we check that you haven't specified both
        # rule.count and rule.until? Note that we only serialize
        # rule.until if there's no rule.count.

        # validate byparams
        for param in Rule.byparams:
            validate_iterable(rule, param)
            if param == 'byday':
                for value in getattr(rule, 'byday', []):
                    try:
                        to_weekday(value)
                    except ValueError:
                        raise exceptions.ValidationError(
                            'invalid byday parameter: %r' % value)
            elif param == 'bymonth':
                validate_iterable_ints(rule, param, 1, 12)
            elif param == 'bymonthday':
                validate_iterable_ints(rule, param, -4, 31)
            elif param == 'byhour':
                validate_iterable_ints(rule, param, 0, 23)
            elif param == 'byminute':
                validate_iterable_ints(rule, param, 0, 59)
            elif param == 'bysecond':
                validate_iterable_ints(rule, param, 0, 59)
            else:
                validate_iterable_ints(rule, param)

    if obj.dtstart:
        validate_dt(obj.dtstart)
    if obj.dtend:
        validate_dt(obj.dtend)
    if obj.rrules:
        list(map(lambda rule: validate_rule(rule), obj.rrules))
    if obj.exrules:
        list(map(lambda rule: validate_rule(rule), obj.exrules))
    if obj.rdates:
        list(map(lambda dt: validate_dt(dt), obj.rdates))
    if obj.exdates:
        list(map(lambda dt: validate_dt(dt), obj.exdates))


def serialize(rule_or_recurrence):
    """
    Serialize a `Rule` or `Recurrence` instance.

    `Rule` instances are wrapped as an rrule in a `Recurrence`
    instance before serialization, and will serialize as the `RRULE`
    property.

    All `datetime.datetime` objects will be converted and serialized
    as UTC.

    :Returns:
        A rfc2445 formatted unicode string.
    """
    def serialize_dt(dt):
        dt = to_utc(dt)
        return u'%s%s%sT%s%s%sZ' % (
            str(dt.year).rjust(4, '0'),
            str(dt.month).rjust(2, '0'),
            str(dt.day).rjust(2, '0'),
            str(dt.hour).rjust(2, '0'),
            str(dt.minute).rjust(2, '0'),
            str(dt.second).rjust(2, '0'),
        )

    def serialize_rule(rule):
        values = []
        values.append((u'FREQ', [Rule.frequencies[rule.freq]]))

        if rule.interval != 1:
            values.append((u'INTERVAL', [str(int(rule.interval))]))
        if rule.wkst:
            values.append((u'WKST', [Rule.weekdays[getattr(rule.wkst, 'number', rule.wkst)]]))

        if rule.count is not None:
            values.append((u'COUNT', [str(rule.count)]))
        elif rule.until is not None:
            values.append((u'UNTIL', [serialize_dt(rule.until)]))

        if rule.byday:
            days = []
            for d in rule.byday:
                d = to_weekday(d)
                # TODO - this if/else copies what Weekday's __repr__
                # does - perhaps we should refactor it into a __str__
                # method on Weekday?
                if d.index:
                    days.append(u'%s%s' % (d.index, Rule.weekdays[d.number]))
                else:
                    days.append(Rule.weekdays[d.number])
            values.append((u'BYDAY', days))

        remaining_params = list(Rule.byparams)
        remaining_params.remove('byday')
        for param in remaining_params:
            value_list = getattr(rule, param, None)
            if value_list:
                values.append((param.upper(), [str(n) for n in value_list]))

        return u';'.join(u'%s=%s' % (i[0], u','.join(i[1])) for i in values)

    if rule_or_recurrence is None:
        return None

    try:
        validate(rule_or_recurrence)
    except exceptions.ValidationError as error:
        raise exceptions.SerializationError(error.args[0])

    obj = rule_or_recurrence
    if isinstance(obj, Rule):
        obj = Recurrence(rrules=[obj])

    items = []

    if obj.dtstart:
        items.append((u'DTSTART', serialize_dt(obj.dtstart)))
    if obj.dtend:
        items.append((u'DTEND', serialize_dt(obj.dtend)))

    for rrule in obj.rrules:
        items.append((u'RRULE', serialize_rule(rrule)))
    for exrule in obj.exrules:
        items.append((u'EXRULE', serialize_rule(exrule)))

    for rdate in obj.rdates:
        items.append((u'RDATE', serialize_dt(rdate)))
    for exdate in obj.exdates:
        items.append((u'EXDATE', serialize_dt(exdate)))

    return u'\n'.join(u'%s:%s' % i for i in items)


def deserialize(text, include_dtstart=True):
    """
    Deserialize a rfc2445 formatted string.

    This is a basic parser that is a partial implementation of rfc2445
    which pertains to specifying recurring date/times. Limitations
    include:

      - Only collects `DTSTART`, `DTEND`, `RRULE`, `EXRULE`, `RDATE`,
        and `EXDATE` properties.

      - Does not capture parameter options (i.e. RDATE;VALUE=PERIOD).
        `dateutil.rrule` does not support anything other than
        `DATE-TIME` parameter types.

      - `VTIMEZONE` and `TZID` can't be specified, so dates without
        the 'Z' marker will be localized to
        `settings.TIME_ZONE`. `datetime.datetime` objects in
        `Recurrence`/`Rrule` objects will be serialized as UTC.

      - The `DTSTART`, `DTEND`, `RDATE` and `EXDATE` properties also
        only support the `DATE-TIME` type.

    :Returns:
        A `Recurrence` instance.
    """
    def deserialize_dt(text):
        """
        Deserialize a rfc2445 text to a datetime.

        The setting RECURRENCE_USE_TZ determines if a naive or
        timezone aware datetime is returned.

        If this setting is not present the setting USE_TZ is used
        as a default.

        This setting is accessed via the `.settings.deserialize_tz`
        function.
        """
        try:
            year, month, day = int(text[:4]), int(text[4:6]), int(text[6:8])
        except ValueError:
            raise exceptions.DeserializationError('malformed date-time: %r' % text)
        if u'T' in text:
            # time is also specified
            try:
                hour, minute, second = (
                    int(text[9:11]), int(text[11:13]), int(text[13:15]))
            except ValueError:
                raise exceptions.DeserializationError('malformed date-time: %r' % text)
        else:
            # only date is specified, use midnight
            hour, minute, second = (0, 0, 0)
        if u'Z' in text:
            # time is in utc
            tzinfo = tz.UTC
        else:
            # right now there is no support for VTIMEZONE/TZID since
            # this is a partial implementation of rfc2445 so we'll
            # just use the time zone specified in the Django settings.
            tzinfo = get_current_timezone()

        dt = datetime.datetime(
            year, month, day, hour, minute, second, tzinfo=tzinfo)

        if settings.deserialize_tz():
            return dt

        dt = dt.astimezone(get_current_timezone())

        # set tz to settings.TIME_ZONE and return offset-naive datetime
        return datetime.datetime(
            dt.year, dt.month, dt.day, dt.hour, dt.minute, dt.second)

    dtstart, dtend, rrules, exrules, rdates, exdates = None, None, [], [], [], []

    tokens = re.compile(
        u'(DTSTART|DTEND|RRULE|EXRULE|RDATE|EXDATE)[^:]*:(.*)',
        re.MULTILINE).findall(text)

    if not tokens and text:
        raise exceptions.DeserializationError('malformed data')

    for label, param_text in tokens:
        if not param_text:
            raise exceptions.DeserializationError('empty property: %r' % label)

        if label in (u'RRULE', u'EXRULE'):
            params = {}
            param_tokens = filter(lambda p: p, param_text.split(u';'))
            for item in param_tokens:
                try:
                    param_name, param_value = map(
                        lambda i: i.strip(), item.split(u'=', 1))
                except ValueError:
                    raise exceptions.DeserializationError(
                        'missing parameter value: %r' % item)
                params[param_name] = list(map(
                    lambda i: i.strip(), param_value.split(u',')))

            kwargs = {}
            for key, value in params.items():
                if key == u'FREQ':
                    try:
                        kwargs[str(key.lower())] = list(
                            Rule.frequencies).index(value[0])
                    except ValueError:
                        raise exceptions.DeserializationError(
                            'bad frequency value: %r' % value[0])
                elif key == u'INTERVAL':
                    try:
                        kwargs[str(key.lower())] = int(value[0])
                    except ValueError:
                        raise exceptions.DeserializationError(
                            'bad interval value: %r' % value[0])
                elif key == u'WKST':
                    try:
                        kwargs[str(key.lower())] = to_weekday(value[0]).number
                    except ValueError:
                        raise exceptions.DeserializationError(
                            'bad weekday value: %r' % value[0])
                elif key == u'COUNT':
                    try:
                        kwargs[str(key.lower())] = int(value[0])
                    except ValueError:
                        raise exceptions.DeserializationError(
                            'bad count value: %r' % value[0])
                elif key == u'UNTIL':
                    kwargs[str(key.lower())] = deserialize_dt(value[0])
                elif key == u'BYDAY':
                    bydays = []
                    for v in value:
                        try:
                            bydays.append(to_weekday(v))
                        except ValueError:
                            raise exceptions.DeserializationError(
                                'bad weekday value: %r' % v)
                    kwargs[str(key.lower())] = bydays
                elif key.lower() in Rule.byparams:
                    numbers = []
                    for v in value:
                        try:
                            numbers.append(int(v))
                        except ValueError:
                            raise exceptions.DeserializationError(
                                'bad value: %r' % value)
                    kwargs[str(key.lower())] = numbers
                else:
                    raise exceptions.DeserializationError('bad parameter: %s' % key)
            if 'freq' not in kwargs:
                raise exceptions.DeserializationError(
                    'frequency parameter missing from rule')
            if label == u'RRULE':
                rrules.append(Rule(**kwargs))
            else:
                exrules.append(Rule(**kwargs))
        elif label == u'DTSTART':
            dtstart = deserialize_dt(param_text)
        elif label == u'DTEND':
            dtend = deserialize_dt(param_text)
        elif label == u'RDATE':
            rdates.append(deserialize_dt(param_text))
        elif label == u'EXDATE':
            for item in param_text.split(','):
                exdates.append(deserialize_dt(item))

    return Recurrence(dtstart, dtend, rrules, exrules, rdates, exdates, include_dtstart)


def rule_to_text(rule, short=False):
    """
    Render the given `Rule` as natural text.

    :Parameters:
        `short` : bool
            Use abbreviated labels, i.e. 'Fri' instead of 'Friday'.
    """
    frequencies = (
        _('annually'), _('monthly'), _('weekly'), _('daily'),
        _('hourly'), _('minutely'), _('secondly'),
    )
    timeintervals = (
        _('years'), _('months'), _('weeks'), _('days'),
        _('hours'), _('minutes'), _('seconds'),
    )

    if short:
        positional_display = {
            1: _('1st %(weekday)s'),
            2: _('2nd %(weekday)s'),
            3: _('3rd %(weekday)s'),
            -1: _('last %(weekday)s'),
            -2: _('2nd last %(weekday)s'),
            -3: _('3rd last %(weekday)s'),
        }
        last_of_month_display = {
            -1: _('last'),
            -2: _('2nd last'),
            -3: _('3rd last'),
            -4: _('4th last'),
        }
        weekdays_display = (
            _('Mon'), _('Tue'), _('Wed'),
            _('Thu'), _('Fri'), _('Sat'), _('Sun'),
        )
        months_display = (
            _('Jan'), _('Feb'), _('Mar'), _('Apr'),
            _p('month name', 'May'), _('Jun'), _('Jul'), _('Aug'),
            _('Sep'), _('Oct'), _('Nov'), _('Dec'),
        )

    else:
        positional_display = {
            1: _('first %(weekday)s'),
            2: _('second %(weekday)s'),
            3: _('third %(weekday)s'),
            4: _('fourth %(weekday)s'),
            -1: _('last %(weekday)s'),
            -2: _('second last %(weekday)s'),
            -3: _('third last %(weekday)s'),
        }
        last_of_month_display = {
            -1: _('last'),
            -2: _('second last'),
            -3: _('third last'),
            -4: _('fourth last'),
        }
        weekdays_display = (
            _('Monday'), _('Tuesday'), _('Wednesday'),
            _('Thursday'), _('Friday'), _('Saturday'), _('Sunday'),
        )
        months_display = (
            _('January'), _('February'), _('March'), _('April'),
            _p('month name', 'May'), _('June'), _('July'), _('August'),
            _('September'), _('October'), _('November'), _('December'),
        )

    def get_positional_weekdays(rule):
        items = []
        if rule.bysetpos and rule.byday:
            for setpos in rule.bysetpos:
                for byday in rule.byday:
                    byday = to_weekday(byday)
                    items.append(
                        positional_display.get(setpos) % {
                            'weekday': weekdays_display[byday.number]})
        elif rule.byday:
            for byday in rule.byday:
                byday = to_weekday(byday)
                items.append(
                    positional_display.get(byday.index, '%(weekday)s') % {
                        'weekday': weekdays_display[byday.number]})
        return _(', ').join(items)

    parts = []

    if rule.interval > 1:
        parts.append(
            _('every %(number)s %(freq)s') % {
                'number': rule.interval,
                'freq': timeintervals[rule.freq]
            })
    else:
        parts.append(frequencies[rule.freq])

    if rule.freq == YEARLY:
        if rule.bymonth:
            # bymonths are 1-indexed (January is 1), months_display
            # are 0-indexed (January is 0).
            items = _(', ').join(
                [months_display[month] for month in
                 [month_index - 1 for month_index in rule.bymonth]])
            parts.append(_('each %(items)s') % {'items': items})
        if rule.byday or rule.bysetpos:
            parts.append(
                _('on the %(items)s') % {
                    'items': get_positional_weekdays(rule)})

    if rule.freq == MONTHLY:
        if rule.bymonthday:
            items = _(', ').join([
                dateformat.format(datetime.datetime(1, 1, day), 'jS') if day > 0
                else last_of_month_display.get(day, day)
                for day in rule.bymonthday])
            parts.append(_('on the %(items)s') % {'items': items})
        elif rule.byday:
            if rule.byday or rule.bysetpos:
                parts.append(
                    _('on the %(items)s') % {
                        'items': get_positional_weekdays(rule)})

    if rule.freq == WEEKLY:
        if rule.byday:
            items = _(', ').join([
                weekdays_display[to_weekday(day).number]
                for day in rule.byday])
            parts.append(_('each %(items)s') % {'items': items})

    # daily freqencies has no additional formatting,
    # hour/minute/second formatting not supported

    if rule.count:
        if rule.count == 1:
            parts.append(_('occuring once'))
        else:
            parts.append(_('occuring %(number)s times') % {
                'number': rule.count})
    elif rule.until:
        parts.append(_('until %(date)s') % {
            'date': dateformat.format(rule.until, 'Y-m-d')})

    return _(', ').join(parts)


def normalize_offset_awareness(dt, from_dt=None):
    """
    Given two `datetime.datetime` objects, return the second object as
    timezone offset-aware or offset-naive depending on the existence
    of the first object's tzinfo.

    If the second object is to be made offset-aware, it is assumed to
    be in the local timezone (with the timezone derived from the
    TIME_ZONE setting). If it is to be made offset-naive, It is first
    converted to the local timezone before being made naive.

    :Parameters:
        `dt` : `datetime.datetime`
            The datetime object to make offset-aware/offset-naive.
        `from_dt` : `datetime.datetime`
            The datetime object to test the existence of a tzinfo. If
            the value is nonzero, it will be understood as
            offset-naive
    """
    if from_dt and is_aware(from_dt) and is_aware(dt):
        return dt
    elif from_dt and is_aware(from_dt) and is_naive(dt):
        dt = make_aware(dt)
    elif is_aware(dt):
        dt = dt.astimezone(get_current_timezone())
        dt = datetime.datetime(
            dt.year, dt.month, dt.day,
            dt.hour, dt.minute, dt.second)
    return dt


def from_dateutil_rrule(rrule):
    """
    Convert a `dateutil.rrule.rrule` instance to a `Rule` instance.

    :Returns:
        A `Rrule` instance.
    """
    kwargs = {}
    kwargs['freq'] = rrule._freq
    kwargs['interval'] = rrule._interval
    if rrule._wkst != 0:
        kwargs['wkst'] = rrule._wkst
    kwargs['bysetpos'] = rrule._bysetpos
    if rrule._count is not None:
        kwargs['count'] = rrule._count
    elif rrule._until is not None:
        kwargs['until'] = rrule._until

    days = []
    if (rrule._byweekday is not None and (
        WEEKLY != rrule._freq or len(rrule._byweekday) != 1 or
        rrule._dtstart.weekday() != rrule._byweekday[0])):
        # ignore byweekday if freq is WEEKLY and day correlates
        # with dtstart because it was automatically set by
        # dateutil
        days.extend(Weekday(n) for n in rrule._byweekday)

    if rrule._bynweekday is not None:
        days.extend(Weekday(*n) for n in rrule._bynweekday)

    if len(days) > 0:
        kwargs['byday'] = days

    if rrule._bymonthday is not None and len(rrule._bymonthday) > 0:
        if not (rrule._freq <= MONTHLY and len(rrule._bymonthday) == 1 and
                rrule._bymonthday[0] == rrule._dtstart.day):
            # ignore bymonthday if it's generated by dateutil
            kwargs['bymonthday'] = list(rrule._bymonthday)

    if rrule._bynmonthday is not None and len(rrule._bynmonthday) > 0:
        kwargs.setdefault('bymonthday', []).extend(rrule._bynmonthday)

    if rrule._bymonth is not None and len(rrule._bymonth) > 0:
        if (rrule._byweekday is not None or
            len(rrule._bynweekday or ()) > 0 or not (
            rrule._freq == YEARLY and len(rrule._bymonth) == 1 and
            rrule._bymonth[0] == rrule._dtstart.month)):
            # ignore bymonth if it's generated by dateutil
            kwargs['bymonth'] = list(rrule._bymonth)

    if rrule._byyearday is not None:
        kwargs['byyearday'] = list(rrule._byyearday)
    if rrule._byweekno is not None:
        kwargs['byweekno'] = list(rrule._byweekno)

    kwargs['byhour'] = list(rrule._byhour)
    kwargs['byminute'] = list(rrule._byminute)
    kwargs['bysecond'] = list(rrule._bysecond)
    if (rrule._dtstart.hour in rrule._byhour and
        rrule._dtstart.minute in rrule._byminute and
        rrule._dtstart.second in rrule._bysecond):
        # ignore byhour/byminute/bysecond automatically set by
        # dateutil from dtstart
        kwargs['byhour'].remove(rrule._dtstart.hour)
        kwargs['byminute'].remove(rrule._dtstart.minute)
        kwargs['bysecond'].remove(rrule._dtstart.second)

    return Rule(**kwargs)


def from_dateutil_rruleset(rruleset):
    """
    Convert a `dateutil.rrule.rruleset` instance to a `Recurrence`
    instance.

    :Returns:
        A `Recurrence` instance.
    """
    rrules = [from_dateutil_rrule(rrule) for rrule in rruleset._rrule]
    exrules = [from_dateutil_rrule(exrule) for exrule in rruleset._exrule]
    rdates = rruleset._rdate
    exdates = rruleset._exdate

    dts = [r._dtstart for r in rruleset._rrule] + rruleset._rdate
    if len(dts) > 0:
        dts.sort()
        dtstart = dts[0]
    else:
        dtstart = None

    return Recurrence(dtstart, rrules, exrules, rdates, exdates)