1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731
|
Network Working Group J. Young
Request for Comments: 1307 A. Nicholson
Cray Research, Inc.
March 1992
Dynamically Switched Link Control Protocol
Status of this Memo
This memo defines an Experimental Protocol for the Internet
community. Discussion and suggestions for improvement are requested.
Please refer to the current edition of the "IAB Official Protocol
Standards" for the standardization state and status of this protocol.
Distribution of this memo is unlimited.
Abstract
This memo describes an experimental protocol developed by a project
team at Cray Research, Inc., in implementing support for circuit-
switched T3 services. The protocol is used for the control of
network connections external to a host, but known to the host. It is
documented here for the benefit of others who may wish to perform
further research.
While working with circuit-switched T3 networks, developers at Cray
Research, Inc., defined a model wherein a host would generate control
messages for a network switch. This work is described in RFC 1306,
"Experiences Supporting By-Request Circuit-Switched T3 Networks". In
order to simplify the model it was decided that the inconsistencies
of switch control should be hidden from the host generating the
control messages. To that end, a protocol was defined and
implemented. This RFC documents the Dynamically Switched Link
Control Protocol (DSLCP), which is used for creation and control of
downstream network links by a host.
1.0 INTRODUCTION
The Dynamically Switched Link Control Protocol (DSLCP) allows a host
with knowledge of a special downstream network link to issue messages
to control the status of that link.
This document describes the functions of the DSLCP to control
external network connections.
Young & Nicholson [Page 1]
RFC 1307 Dynamically Switched Link Control Protocol March 1992
1.1 Motivation
Circuit Switched Networks are becoming available to the Internet
community. These networks are made available by requesting a
connection through a switch. Normally circuit switched network links
are disconnected, and their prohibitive cost suggests that it is very
costly to leave them connected at all times.
Internet users and hosts wish to send data over a circuit switched
networks, but only connect the network links when a transport
connection is to be established. While it would be possible to use
packet routers to identify the need for switching a connection on and
off, only the transport provider can positively identify the
beginning and end of a transport session. There must be a mechanism
to activate and deactivate the link at the beginning and end of a
transport session.
The DSLCP assumes that a transport provider has knowledge of a
downstream link which must be setup before data transfer may take
place. However, the details of link setup may vary by the type of
link (circuit-switched or other), specific hardware, or
administrative differences. The DSLCP hides these details from the
transport provider by offering a simple request/release model of link
preparation. The model assumes an entity in control of the link
which handles the details of connection preparation while responding
to the DSLCP commands of the transport provider. This entity is
called the link controller.
The DSLCP allows internet hosts to dynamically change the fabric of
the internet by sending messages through the internet in advance of
data which is to travel across the newly created links.
1.2 Scope
DSLCP is intended to provide an interface between transport providers
and arbitrary network links requiring creation, control, setup, or
conditioning before data communications may take place.
1.3 Interfaces
There are no specific user level interfaces to DSLCP, although they
are not precluded. Link control is a function of the network layer,
initiated by requests from the transport provider.
A DSLCP transaction is defined as a transport provider communicating
with a link controller for the duration of transport session. A
network path between the host providing transport services and the
link controller must exist in advance of the DSLCP transaction.
Young & Nicholson [Page 2]
RFC 1307 Dynamically Switched Link Control Protocol March 1992
Either party to an DSLCP transaction may asynchronously generate
messages.
1.4 Operation
The purpose of the DSLCP is to allow a transport provider to request
the setup of a downstream network link so that data transfer may take
place through that link. DSLCP messages are assumed to be
communicated between the transport provider and the link controller
through a transport service, such as UDP or TCP, or through a network
service such as IP.
DSLCP provides messages for link setup and teardown. All the details
of link management are left to the link controller. The transport
provider is interested only whether the link is ready to carry data.
1.5 Transmission
DSLCP messages are carried through the network in datagrams using
either IP or UDP. DSLCP is designed to not require a reliable
transport protocol.
2.0 DSLCP Architecture
DSLCP is used in a host environment. Normally, transport users on
the host will make requests of a transport provider to carry data to
other hosts. Some of these requests may require the preparation of a
downstream network link. The transport provider has knowledge of
these special network links, and issues a request to DSLCP that the
link be prepared to carry data. This happens transparently to the
transport user.
When a transport user requests transport services, the transport
provider will normally attempt to establish a connection. In the
event the transport provider discovers that the connection requires
special link control, the transport provider will call upon DSLCP to
send a link setup message to the link controller. The transport
provider does not attempt to use the connection until DSLCP informs
the transport provider that the link is setup or that the setup
attempt failed. If the setup failed, then the transport provider is
free to attempt to find another way to create a connection.
When the transport user is finished using the services, then the
transport provider will call DSLCP to release the link. The
transport provider may now assume that the link is no longer
available.
In general, DSLCP maintains and hides the status of link control
Young & Nicholson [Page 3]
RFC 1307 Dynamically Switched Link Control Protocol March 1992
transactions from the transport provider. This way the transport
provider does not need to keep track of multiple DSLCP transactions.
For example, if the transport provider requests a link be setup for a
new transport user while another transport user has the link active,
the DSLCP may inform the transport provider that the link is ready
without delay, provided that the link can support multiple transport
connections.
3.0 FUNCTIONAL SPECIFICATION
This document specifies both a message format and a state machine for
DSLCP protocol transactions.
3.1 Control Message Format
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Identifier | Total length |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Function | Event Status |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Endpoint 1 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Endpoint 2 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Message |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Body |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Identifier: 16 bits
The identifier is a value assigned by the DSLCP used to uniquely
identify link setup transactions. It is intended to be used with
the endpoint addresses by a link controller to identify a
transaction.
Total length: 16 bits
The total length, in octets, including the header of this DSLCP
control message.
Function: 16 bits
The operation to be processed or being responded to.
Functions currently defined are:
Young & Nicholson [Page 4]
RFC 1307 Dynamically Switched Link Control Protocol March 1992
Bring up value 0
Bring down value 1
Event Status: 16 bits
The state of the controlled link, relative to the last function
request.
The possible event states are:
Setup request succeeded value 2
Setup request failed value 3
Teardown request succeeded value 4
Teardown request failed value 5
Asynchronous network down value 7
Endpoint addresses: 32 bits each
The internet addresses of the two communicating parties for which
the link is being prepared.
Message body: arbitrary length up to 65499 octets
An ascii string which is meaningful the link controller. When the
requesting host is configured, the system administrator sets the
control strings for each network link that may be accessed by the
requesting host.
3.2 State Machine
The transport provider is aware of only 2 possible states for the
controlled link: up or down. Furthermore, transport users may
request or release transport services from the transport provider at
any time. Thus, there must be a state machine employed by DSLCP when
communicating between the transport provider and the controlled link.
This state machine hides the details of link control transactions
from the transport provider. The state machine has 6 possible
states.
Down: There is no active transport connection and the controlled
link is not setup.
Coming Up: A transport user has requested a connection for which
the transport provider has given a setup request to the DSLCP.
The DSLCP has sent a setup request to the link controller and is
awaiting a response.
Up: At least one transport connection is active and the
controlled link is setup.
Young & Nicholson [Page 5]
RFC 1307 Dynamically Switched Link Control Protocol March 1992
Going Down: All transport connections have been terminated and
the transport provider has sent an equivalent number of up
requests and down requests to the DSLCP. The DSLCP has sent a
teardown request to the link controller and is awaiting a
response.
Bring Down: While DSLCP is in the Coming Up state, the transport
provider requested link teardown. As soon as a response is
received from the link controller, the DSLCP will send a
teardown request if the link setup was successful.
Bring Up: While in the Going Down state, the transport provider
requested connection setup. As soon as a response is received
from the link controller, the DSLCP will send a setup request.
Young & Nicholson [Page 6]
RFC 1307 Dynamically Switched Link Control Protocol March 1992
DSLCP state diagram:
------- +----------------+
Transport | Down |<---------\
Connect ---->+----------------+ \
Request / ^ ^ \
------- Setup | | \
Send Failed | | Teardown \ Response Timeout
Setup /------ | | Success \ ---------------
/ / | | -------- |
| | | | |
| | | | |
| | Teardown Response | | |
| | Success Timeout | | |
| | ----------------- | | +----------+ |
| | Send---------|--|-----| Bring Up |--|----\
| | Setup | | +----------+ | | Transport
| | / | | ^ | | Teardown
| | / | | Transport | | Request
| | / | | Connect| | | ---------
| | / Setup | Request| | |
| | | Failed | -------| | |
v | v ------ | | | v
+--------------+ | | +-------------+
| Coming Up |----------+----|--|--Response--->| Going Down |
+--------------+ ^ | | Timeout +-------------+
| ^ | | | | -------- ^ ^
| | Transport | | | Send | |
| Transport Teardown | | | Teardown | |
| Connect Request | | | / |
| Request ------- | | | / |
| ------- v | | | / /
| \ +------------+ - | | / /
| -| Bring Down | ------ | / /
\ +------------+ --------|--Setup----- /
\ | Success /
\ | ------- /
\ Setup Network | Send / Transport
\ Success Is Down | Teardown / Teardown
\ ------- ------- | / Request
\ | / --------
\ | / Send
\ +---------------+ / Teardown
\----------->| Up |---
+---------------+
Young & Nicholson [Page 7]
RFC 1307 Dynamically Switched Link Control Protocol March 1992
Events and State Transitions
The DSLCP will process three type of events:
A link control request from the transport provider
An DSLCP message from the link controller
DSLCP message timeout
The transport provider will make link setup and and teardown requests
to the DSLCP when transport users request and release services
requiring link control operations. The transport provider should not
keep track of the status of a particular link, as this is a function
of the DSLCP. The transport provider may be unaware of redirection
or other processing of link setup requests performed by DSLCP, so
this is a function best left to DSLCP. The DSLCP will inform the
transport provider as to the success or failure of a particular setup
request, and transport providers may assume the success of teardown
requests (the DSLCP will always return a success response to a
teardown request).
The DSLCP will engage in link control transactions with link
controllers. This will include accepting messages from link
controllers in response to requests as well as unexpected messages
from the link controller. Unexpected messages may include redundant
responses to redundant requests sent as a result of timeouts.
Because of the possibility of unavailable links and link controllers,
DSLCP should not wait indefinitely for message responses from link
controllers to which it has sent messages. Since DSLCP does not
require the use of a reliable transport protocol to carry DSLCP
messages, DSLCP must have a timeout and retransmission mechanism.
Since we have used DSLCP in a local network context with switch
controllers which offer a quick turnaround (on the order of 1
second), we use a 5 second timeout with a 3 retransmit limit. These
figures would require adaptation to different network and link
controller configurations, and a self-adapting algorithm would be
most appropriate for a general solution.
The specific events of interest to the DSLCP are:
Transport provider link setup request
Transport provider link teardown request
Link setup request failed
Link setup request succeeded
Link teardown request succeeded
Link teardown request failed
Network link is down
Young & Nicholson [Page 8]
RFC 1307 Dynamically Switched Link Control Protocol March 1992
Timeout waiting for DSLCP response from link controller
The necessary processing for each event while in each state is as
follows:
Transport provider link setup request
Down:
Send setup request to link controller.
Enter Coming Up state.
Notify transport provider to wait until link is up.
Coming Up:
Bring Up:
Notify transport provider to wait until link is up.
Up:
Notify transport provider that link is up.
Bring Down:
Enter Coming Up state.
Notify transport provider to wait until link is up.
Going Down:
Enter Bring Up state.
Notify transport provider to wait until link is up.
Discussion:
If the controlled link is not capable to support multiple
transport connections, then the DSLCP must return
appropriate errors when it detects multiple transport setup
requests for that link.
Transport provider link teardown request.
Down:
Bring Down:
Going Down:
Notify transport provider that link is down.
Coming Up:
Enter Bring Down state.
Notify transport provider that link is down.
Bring Down:
Notify transport provider that link is down.
Young & Nicholson [Page 9]
RFC 1307 Dynamically Switched Link Control Protocol March 1992
Up:
Send teardown request.
Enter Going Down state.
Notify transport provider that link is down.
Link setup request failed
Down:
Going Down:
Bring Up:
Unexpected message, possibly due to duplicate requests -
ignore it.
Up:
Unexpected message, link controller may be refusing
multiple setup requests sent because of timeout - ignore
it.
Coming Up:
Bring Down:
Enter down state.
Link setup request succeeded
Down:
Unexpected message, possibly due to duplicate requests
and reordering of request packets by network.
Send teardown request.
Going Down:
Bring Up:
Up:
Unexpected message, possibly due to duplicate requests -
ignore it.
Coming Up:
Enter Up state.
Notify transport provider(s) waiting for link that it is
available.
Bring Down:
Send teardown request.
Enter Going Down state.
Link teardown request succeeded
Down:
Coming Up:
Young & Nicholson [Page 10]
RFC 1307 Dynamically Switched Link Control Protocol March 1992
Bring Down:
Unexpected message, possibly due to duplicate requests -
ignore it.
Up:
Unexpected message, possibly due to duplicate requests
and reordering of request packets by network.
Send teardown request.
Enter Going Down state.
Notify transport providers that link has gone down.
Bring Up:
Send setup request
Enter Coming Up state
Going Down:
Enter Down state
Discussion:
If a teardown request succeeded message arrives when the
DSLCP is in the UP state, then some error has occurred, and
the conservative approach is to bring down the connection
and resynchronize. However, it may be satisfactory to
ignore the message without ill effect.
Link teardown request failed
Down:
Coming up:
Bring Down:
Bring Up:
Going Down:
Up:
DSLCP sent a teardown request message for an invalid
transaction. The link controller has no
identifier/endpoints transaction record for the request.
Continue as if request had succeeded.
Network link is down
Down:
Ignore message.
Bring Down:
Going Down:
Enter Down state.
Young & Nicholson [Page 11]
RFC 1307 Dynamically Switched Link Control Protocol March 1992
Coming up:
Bring Up:
Up:
Enter down state.
Notify transport provider that link is down.
Timeout waiting for DSLCP response from controller
Down:
Up:
DSLCP protocol error - fix bug, don't set timer when
there are no outstanding requests.
Coming Up:
Bring Down:
Send teardown request.
Enter Going down state.
Going Down:
Enter Down state.
Bring Up:
Send setup request.
Enter Coming Up state.
References
[1] Nicholson, et. al., "High Speed Networking at Cray Research",
Computer Communications Review, January, 1991.
[2] Nicholson, A., and J. Young, "Experiences Supporting By-Request
Circuit-Switched T3 Networks", RFC 1306, Cray Research, Inc.,
March 1992.
Security Considerations
Security issues are not discussed in this memo.
Young & Nicholson [Page 12]
RFC 1307 Dynamically Switched Link Control Protocol March 1992
Authors' Addresses
Jeff Young
Cray Research, Inc.
655F Lone Oak Drive
Eagan, MN 55123
Phone: (612) 452-6650
EMail: jsy@cray.com
Andy Nicholson
Cray Research, Inc.
655F Lone Oak Drive
Eagan, MN 55123
Phone: (612) 452-6650
EMail: droid@cray.com
Young & Nicholson [Page 13]
|