Network Working Group                                        D. Eastlake
Request for Comments: 2538                                           IBM
Category: Standards Track                                 O. Gudmundsson
                                                                TIS Labs
                                                              March 1999


          Storing Certificates in the Domain Name System (DNS)

Status of this Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (1999).  All Rights Reserved.

Abstract

   Cryptographic public key are frequently published and their
   authenticity demonstrated by certificates.  A CERT resource record
   (RR) is defined so that such certificates and related certificate
   revocation lists can be stored in the Domain Name System (DNS).

Table of Contents

   Abstract...................................................1
   1. Introduction............................................2
   2. The CERT Resource Record................................2
   2.1 Certificate Type Values................................3
   2.2 Text Representation of CERT RRs........................4
   2.3 X.509 OIDs.............................................4
   3. Appropriate Owner Names for CERT RRs....................5
   3.1 X.509 CERT RR Names....................................5
   3.2 PGP CERT RR Names......................................6
   4. Performance Considerations..............................6
   5. IANA Considerations.....................................7
   6. Security Considerations.................................7
   References.................................................8
   Authors' Addresses.........................................9
   Full Copyright Notice.....................................10






Eastlake & Gudmundsson      Standards Track                     [Page 1]

RFC 2538            Storing Certificates in the DNS           March 1999


1. Introduction

   Public keys are frequently published in the form of a certificate and
   their authenticity is commonly demonstrated by certificates and
   related certificate revocation lists (CRLs).  A certificate is a
   binding, through a cryptographic digital signature, of a public key,
   a validity interval and/or conditions, and identity, authorization,
   or other information. A certificate revocation list is a list of
   certificates that are revoked, and incidental information, all signed
   by the signer (issuer) of the revoked certificates. Examples are
   X.509 certificates/CRLs in the X.500 directory system or PGP
   certificates/revocations used by PGP software.

   Section 2 below specifies a CERT resource record (RR) for the storage
   of certificates in the Domain Name System.

   Section 3 discusses appropriate owner names for CERT RRs.

   Sections 4, 5, and 6 below cover performance, IANA, and security
   considerations, respectively.

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

2. The CERT Resource Record

   The CERT resource record (RR) has the structure given below.  Its RR
   type code is 37.

                         1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 3 3
     0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |             type              |             key tag           |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |   algorithm   |                                               /
    +---------------+            certificate or CRL                 /
    /                                                               /
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-|

   The type field is the certificate type as define in section 2.1
   below.

   The algorithm field has the same meaning as the algorithm field in
   KEY and SIG RRs [RFC 2535] except that a zero algorithm field
   indicates the algorithm is unknown to a secure DNS, which may simply
   be the result of the algorithm not having been standardized for
   secure DNS.



Eastlake & Gudmundsson      Standards Track                     [Page 2]

RFC 2538            Storing Certificates in the DNS           March 1999


   The key tag field is the 16 bit value computed for the key embedded
   in the certificate as specified in the DNSSEC Standard [RFC 2535].
   This field is used as an efficiency measure to pick which CERT RRs
   may be applicable to a particular key.  The key tag can be calculated
   for the key in question and then only CERT RRs with the same key tag
   need be examined. However, the key must always be transformed to the
   format it would have as the public key portion of a KEY RR before the
   key tag is computed.  This is only possible if the key is applicable
   to an algorithm (and limits such as key size limits) defined for DNS
   security.  If it is not, the algorithm field MUST BE zero and the tag
   field is meaningless and SHOULD BE zero.

2.1 Certificate Type Values

   The following values are defined or reserved:

    Value  Mnemonic  Certificate Type
    -----  --------  ----------- ----
        0            reserved
        1   PKIX     X.509 as per PKIX
        2   SPKI     SPKI cert
        3   PGP      PGP cert
    4-252            available for IANA assignment
      253   URI      URI private
      254   OID      OID private
    255-65534        available for IANA assignment
    65535            reserved

   The PKIX type is reserved to indicate an X.509 certificate conforming
   to the profile being defined by the IETF PKIX working group.  The
   certificate section will start with a one byte unsigned OID length
   and then an X.500 OID indicating the nature of the remainder of the
   certificate section (see 2.3 below).  (NOTE: X.509 certificates do
   not include their X.500 directory type designating OID as a prefix.)

   The SPKI type is reserved to indicate a certificate formated as to be
   specified by the IETF SPKI working group.

   The PGP type indicates a Pretty Good Privacy certificate as described
   in RFC 2440 and its extensions and successors.

   The URI private type indicates a certificate format defined by an
   absolute URI.  The certificate portion of the CERT RR MUST begin with
   a null terminated URI [RFC 2396] and the data after the null is the
   private format certificate itself.  The URI SHOULD be such that a
   retrieval from it will lead to documentation on the format of the
   certificate.  Recognition of private certificate types need not be
   based on URI equality but can use various forms of pattern matching



Eastlake & Gudmundsson      Standards Track                     [Page 3]

RFC 2538            Storing Certificates in the DNS           March 1999


   so that, for example, subtype or version information can also be
   encoded into the URI.

   The OID private type indicates a private format certificate specified
   by a an ISO OID prefix.  The certificate section will start with a
   one byte unsigned OID length and then a BER encoded OID indicating
   the nature of the remainder of the certificate section.  This can be
   an X.509 certificate format or some other format.  X.509 certificates
   that conform to the IETF PKIX profile SHOULD be indicated by the PKIX
   type, not the OID private type.  Recognition of private certificate
   types need not be based on OID equality but can use various forms of
   pattern matching such as OID prefix.

2.2 Text Representation of CERT RRs

   The RDATA portion of a CERT RR has the type field as an unsigned
   integer or as a mnemonic symbol as listed in section 2.1 above.

   The key tag field is represented as an unsigned integer.

   The algorithm field is represented as an unsigned integer or a
   mnemonic symbol as listed in [RFC 2535].

   The certificate / CRL portion is represented in base 64 and may be
   divided up into any number of white space separated substrings, down
   to single base 64 digits, which are concatenated to obtain the full
   signature.  These substrings can span lines using the standard
   parenthesis.

   Note that the certificate / CRL portion may have internal sub-fields
   but these do not appear in the master file representation.  For
   example, with type 254, there will be an OID size, an OID, and then
   the certificate / CRL proper. But only a single logical base 64
   string will appear in the text representation.

2.3 X.509 OIDs

   OIDs have been defined in connection with the X.500 directory for
   user certificates, certification authority certificates, revocations
   of certification authority, and revocations of user certificates.
   The following table lists the OIDs, their BER encoding, and their
   length prefixed hex format for use in CERT RRs:









Eastlake & Gudmundsson      Standards Track                     [Page 4]

RFC 2538            Storing Certificates in the DNS           March 1999


    id-at-userCertificate
        = { joint-iso-ccitt(2) ds(5) at(4) 36 }
           == 0x 03 55 04 24
    id-at-cACertificate
        = { joint-iso-ccitt(2) ds(5) at(4) 37 }
           == 0x 03 55 04 25
    id-at-authorityRevocationList
        = { joint-iso-ccitt(2) ds(5) at(4) 38 }
           == 0x 03 55 04 26
    id-at-certificateRevocationList
        = { joint-iso-ccitt(2) ds(5) at(4) 39 }
           == 0x 03 55 04 27

3. Appropriate Owner Names for CERT RRs

   It is recommended that certificate CERT RRs be stored under a domain
   name related to their subject, i.e., the name of the entity intended
   to control the private key corresponding to the public key being
   certified.  It is recommended that certificate revocation list CERT
   RRs be stored under a domain name related to their issuer.

   Following some of the guidelines below may result in the use in DNS
   names of characters that require DNS quoting which is to use a
   backslash followed by the octal representation of the ASCII code for
   the character such as \000 for NULL.

3.1 X.509 CERT RR Names

   Some X.509 versions permit multiple names to be associated with
   subjects and issuers under "Subject Alternate Name" and "Issuer
   Alternate Name".  For example, x.509v3 has such Alternate Names with
   an ASN.1 specification as follows:

         GeneralName ::= CHOICE {
            otherName                  [0] INSTANCE OF OTHER-NAME,
            rfc822Name                 [1] IA5String,
            dNSName                    [2] IA5String,
            x400Address                [3] EXPLICIT OR-ADDRESS.&Type,
            directoryName              [4] EXPLICIT Name,
            ediPartyName               [5] EDIPartyName,
            uniformResourceIdentifier  [6] IA5String,
            iPAddress                  [7] OCTET STRING,
            registeredID               [8] OBJECT IDENTIFIER
         }

   The recommended locations of CERT storage are as follows, in priority
   order:




Eastlake & Gudmundsson      Standards Track                     [Page 5]

RFC 2538            Storing Certificates in the DNS           March 1999


   (1) If a domain name is included in the identification in the
       certificate or CRL, that should be used.
   (2) If a domain name is not included but an IP address is included,
       then the translation of that IP address into the appropriate
       inverse domain name should be used.
   (3) If neither of the above it used but a URI containing a domain
       name is present, that domain name should be used.
   (4) If none of the above is included but a character string name is
       included, then it should be treated as described for PGP names in
       3.2 below.
   (5) If none of the above apply, then the distinguished name (DN)
       should be mapped into a domain name as specified in RFC 2247.

   Example 1: Assume that an X.509v3 certificate is issued to /CN=John
   Doe/DC=Doe/DC=com/DC=xy/O=Doe Inc/C=XY/ with Subject Alternative
   names of (a) string "John (the Man) Doe", (b) domain name john-
   doe.com, and (c) uri <https://www.secure.john-doe.com:8080/>.  Then
   the storage locations recommended, in priority order, would be
       (1) john-doe.com,
       (2) www.secure.john-doe.com, and
       (3) Doe.com.xy.

   Example 2:  Assume that an X.509v3 certificate is issued to /CN=James
   Hacker/L=Basingstoke/O=Widget Inc/C=GB/ with Subject Alternate names
   of (a) domain name widget.foo.example, (b) IPv4 address
   10.251.13.201, and (c) string "James Hacker
   <hacker@mail.widget.foo.example>".  Then the storage locations
   recommended, in priority order, would be
        (1) widget.foo.example,
        (2) 201.13.251.10.in-addr.arpa, and
        (3) hacker.mail.widget.foo.example.

3.2 PGP CERT RR Names

   PGP signed keys (certificates) use a general character string User ID
   [RFC 2440]. However, it is recommended by PGP that such names include
   the RFC 822 email address of the party, as in "Leslie Example
   <Leslie@host.example>".  If such a format is used, the CERT should be
   under the standard translation of the email address into a domain
   name, which would be leslie.host.example in this case.  If no RFC 822
   name can be extracted from the string name no specific domain name is
   recommended.

4. Performance Considerations

   Current Domain Name System (DNS) implementations are optimized for
   small transfers, typically not more than 512 bytes including
   overhead.  While larger transfers will perform correctly and work is



Eastlake & Gudmundsson      Standards Track                     [Page 6]

RFC 2538            Storing Certificates in the DNS           March 1999


   underway to make larger transfers more efficient, it is still
   advisable at this time to make every reasonable effort to minimize
   the size of certificates stored within the DNS.  Steps that can be
   taken may include using the fewest possible optional or extensions
   fields and using short field values for variable length fields that
   must be included.

5. IANA Considerations

   Certificate types 0x0000 through 0x00FF and 0xFF00 through 0xFFFF can
   only be assigned by an IETF standards action [RFC 2434] (and this
   document assigns 0x0001 through 0x0003 and 0x00FD and 0x00FE).
   Certificate types 0x0100 through 0xFEFF are assigned through IETF
   Consensus [RFC 2434] based on RFC documentation of the certificate
   type.  The availability of private types under 0x00FD and 0x00FE
   should satisfy most requirements for proprietary or private types.

6. Security Considerations

   By definition, certificates contain their own authenticating
   signature.  Thus it is reasonable to store certificates in non-secure
   DNS zones or to retrieve certificates from DNS with DNS security
   checking not implemented or deferred for efficiency.  The results MAY
   be trusted if the certificate chain is verified back to a known
   trusted key and this conforms with the user's security policy.

   Alternatively, if certificates are retrieved from a secure DNS zone
   with DNS security checking enabled and are verified by DNS security,
   the key within the retrieved certificate MAY be trusted without
   verifying the certificate chain if this conforms with the user's
   security policy.

   CERT RRs are not used in connection with securing the DNS security
   additions so there are no security considerations related to CERT RRs
   and securing the DNS itself.
















Eastlake & Gudmundsson      Standards Track                     [Page 7]

RFC 2538            Storing Certificates in the DNS           March 1999


References

   RFC 1034   Mockapetris, P., "Domain Names - Concepts and Facilities",
              STD 13, RFC 1034, November 1987.

   RFC 1035   Mockapetris, P., "Domain Names - Implementation and
              Specifications", STD 13, RFC 1035, November 1987.

   RFC 2119   Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   RFC 2247   Kille, S., Wahl, M., Grimstad, A., Huber, R. and S.
              Sataluri, "Using Domains in LDAP/X.500 Distinguished
              Names", RFC 2247, January 1998.

   RFC 2396   Berners-Lee, T., Fielding, R. and L. Masinter, "Uniform
              Resource Identifiers (URI): Generic Syntax", RFC 2396,
              August 1998.

   RFC 2440   Callas, J., Donnerhacke, L., Finney, H. and R.  Thayer,
              "OpenPGP Message Format", RFC 2240, November 1998.

   RFC 2434   Narten, T. and H. Alvestrand, "Guidelines for Writing an
              IANA Considerations Section in RFCs", BCP 26, RFC 2434,
              October 1998.

   RFC 2535   Eastlake, D., "Domain Name System (DNS) Security
              Extensions", RFC 2535, March 1999.

   RFC 2459   Housley, R., Ford, W., Polk, W. and D. Solo, "Internet
              X.509 Public Key Infrastructure Certificate and CRL
              Profile", RFC 2459, January 1999.



















Eastlake & Gudmundsson      Standards Track                     [Page 8]

RFC 2538            Storing Certificates in the DNS           March 1999


Authors' Addresses

   Donald E. Eastlake 3rd
   IBM
   65 Shindegan Hill Road
   RR#1
   Carmel, NY 10512 USA

   Phone:   +1-914-784-7913 (w)
            +1-914-276-2668 (h)
   Fax:     +1-914-784-3833 (w-fax)
   EMail:   dee3@us.ibm.com


   Olafur Gudmundsson
   TIS Labs at Network Associates
   3060 Washington Rd, Route 97
   Glenwood MD 21738

   Phone: +1 443-259-2389
   EMail: ogud@tislabs.com






























Eastlake & Gudmundsson      Standards Track                     [Page 9]

RFC 2538            Storing Certificates in the DNS           March 1999


Full Copyright Statement

   Copyright (C) The Internet Society (1999).  All Rights Reserved.

   This document and translations of it may be copied and furnished to
   others, and derivative works that comment on or otherwise explain it
   or assist in its implementation may be prepared, copied, published
   and distributed, in whole or in part, without restriction of any
   kind, provided that the above copyright notice and this paragraph are
   included on all such copies and derivative works.  However, this
   document itself may not be modified in any way, such as by removing
   the copyright notice or references to the Internet Society or other
   Internet organizations, except as needed for the purpose of
   developing Internet standards in which case the procedures for
   copyrights defined in the Internet Standards process must be
   followed, or as required to translate it into languages other than
   English.

   The limited permissions granted above are perpetual and will not be
   revoked by the Internet Society or its successors or assigns.

   This document and the information contained herein is provided on an
   "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
   TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
   BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
   HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
























Eastlake & Gudmundsson      Standards Track                    [Page 10]