<pre>Network Working Group                                      S. Hollenbeck
Request for Comments: 3733                                VeriSign, Inc.
Category: Standards Track                                     March 2004


         <span class="h1">Extensible Provisioning Protocol (EPP) Contact Mapping</span>

Status of this Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (2004).  All Rights Reserved.

Abstract

   This document describes an Extensible Provisioning Protocol (EPP)
   mapping for the provisioning and management of individual or
   organizational social information identifiers (known as "contacts")
   stored in a shared central repository.  Specified in Extensible
   Markup Language (XML), the mapping defines EPP command syntax and
   semantics as applied to contacts.

Table of Contents

   <a href="#section-1">1</a>.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  <a href="#page-2">2</a>
       <a href="#section-1.1">1.1</a>.  Conventions Used In This Document. . . . . . . . . . . .  <a href="#page-2">2</a>
   <a href="#section-2">2</a>.  Object Attributes. . . . . . . . . . . . . . . . . . . . . . .  <a href="#page-3">3</a>
       <a href="#section-2.1">2.1</a>.  Contact and Client Identifiers . . . . . . . . . . . . .  <a href="#page-3">3</a>
       <a href="#section-2.2">2.2</a>.  Status Values. . . . . . . . . . . . . . . . . . . . . .  <a href="#page-3">3</a>
       <a href="#section-2.3">2.3</a>.  Individual and Organizational Names. . . . . . . . . . .  <a href="#page-5">5</a>
       <a href="#section-2.4">2.4</a>.  Address. . . . . . . . . . . . . . . . . . . . . . . . .  <a href="#page-5">5</a>
             <a href="#section-2.4.1">2.4.1</a>.  Street, City, and State or Province. . . . . . .  <a href="#page-5">5</a>
             <a href="#section-2.4.2">2.4.2</a>.  Postal Code. . . . . . . . . . . . . . . . . . .  <a href="#page-5">5</a>
             <a href="#section-2.4.3">2.4.3</a>.  Country. . . . . . . . . . . . . . . . . . . . .  <a href="#page-5">5</a>
       <a href="#section-2.5">2.5</a>.  Telephone Numbers. . . . . . . . . . . . . . . . . . . .  <a href="#page-5">5</a>
       <a href="#section-2.6">2.6</a>.  Email Addresses. . . . . . . . . . . . . . . . . . . . .  <a href="#page-6">6</a>
       <a href="#section-2.7">2.7</a>.  Dates and Times. . . . . . . . . . . . . . . . . . . . .  <a href="#page-6">6</a>
       <a href="#section-2.8">2.8</a>.  Authorization Information. . . . . . . . . . . . . . . .  <a href="#page-6">6</a>
       <a href="#section-2.9">2.9</a>.  Disclosure of Data Elements and Attributes . . . . . . .  <a href="#page-6">6</a>
   <a href="#section-3">3</a>.  EPP Command mapping. . . . . . . . . . . . . . . . . . . . . .  <a href="#page-8">8</a>
       <a href="#section-3.1">3.1</a>.  EPP Query Commands . . . . . . . . . . . . . . . . . . .  <a href="#page-8">8</a>
             <a href="#section-3.1.1">3.1.1</a>.  EPP &lt;check&gt; Command. . . . . . . . . . . . . . .  <a href="#page-8">8</a>



<span class="grey">Hollenbeck                  Standards Track                     [Page 1]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-2" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


             <a href="#section-3.1.2">3.1.2</a>.  EPP &lt;info&gt; Command . . . . . . . . . . . . . . . <a href="#page-10">10</a>
             <a href="#section-3.1.3">3.1.3</a>.  EPP &lt;transfer&gt; Query Command . . . . . . . . . . <a href="#page-14">14</a>
       <a href="#section-3.2">3.2</a>.  EPP Transform Commands . . . . . . . . . . . . . . . . . <a href="#page-16">16</a>
             <a href="#section-3.2.1">3.2.1</a>.  EPP &lt;create&gt; Command . . . . . . . . . . . . . . <a href="#page-17">17</a>
             <a href="#section-3.2.2">3.2.2</a>.  EPP &lt;delete&gt; Command . . . . . . . . . . . . . . <a href="#page-20">20</a>
             <a href="#section-3.2.3">3.2.3</a>.  EPP &lt;renew&gt; Command  . . . . . . . . . . . . . . <a href="#page-21">21</a>
             3.2.4.  EPP &lt;transfer&gt; Command.  . . . . . . . . . . . . <a href="#page-21">21</a>
             3.2.5.  EPP &lt;update&gt; Command.  . . . . . . . . . . . . . <a href="#page-23">23</a>
             <a href="#section-3.2.6">3.2.6</a>.  Offline Review of Requested Actions. . . . . . . <a href="#page-26">26</a>
   <a href="#section-4">4</a>.  Formal Syntax. . . . . . . . . . . . . . . . . . . . . . . . . <a href="#page-29">29</a>
   <a href="#section-5">5</a>.  Internationalization Considerations  . . . . . . . . . . . . . <a href="#page-37">37</a>
   <a href="#section-6">6</a>.  IANA Considerations. . . . . . . . . . . . . . . . . . . . . . <a href="#page-38">38</a>
   <a href="#section-7">7</a>.  Security Considerations. . . . . . . . . . . . . . . . . . . . <a href="#page-38">38</a>
   <a href="#section-8">8</a>.  Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . <a href="#page-38">38</a>
   <a href="#section-9">9</a>.  References . . . . . . . . . . . . . . . . . . . . . . . . . . <a href="#page-39">39</a>
       <a href="#section-9.1">9.1</a>.  Normative References . . . . . . . . . . . . . . . . . . <a href="#page-39">39</a>
       <a href="#section-9.2">9.2</a>.  Informative References . . . . . . . . . . . . . . . . . <a href="#page-39">39</a>
   <a href="#section-10">10</a>. Author's Address . . . . . . . . . . . . . . . . . . . . . . . <a href="#page-40">40</a>
   <a href="#section-11">11</a>. Full Copyright Statement . . . . . . . . . . . . . . . . . . . <a href="#page-41">41</a>

<span class="h2"><a class="selflink" id="section-1" href="#section-1">1</a>.  Introduction</span>

   This document describes a personal and organizational identifier
   mapping for version 1.0 of the Extensible Provisioning Protocol
   (EPP).  This mapping is specified using the Extensible Markup
   Language (XML) 1.0 as described in [<a href="#ref-XML" title="&quot;Extensible Markup Language (XML) 1.0 (Second Edition)&quot;">XML</a>] and XML Schema notation as
   described in [<a href="#ref-XMLS-1" title="&quot;XML Schema Part 1: Structures&quot;">XMLS-1</a>] and [<a href="#ref-XMLS-2" title="&quot;XML Schema Part 2: Datatypes&quot;">XMLS-2</a>].

   [<a id="ref-RFC3730">RFC3730</a>] provides a complete description of EPP command and response
   structures.  A thorough understanding of the base protocol
   specification is necessary to understand the mapping described in
   this document.

   XML is case sensitive.  Unless stated otherwise, XML specifications
   and examples provided in this document MUST be interpreted in the
   character case presented to develop a conforming implementation.

<span class="h3"><a class="selflink" id="section-1.1" href="#section-1.1">1.1</a>.  Conventions Used In This Document</span>

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [<a href="./rfc2119" title="&quot;Key Words for Use in RFCs to Indicate Requirement Levels&quot;">RFC2119</a>].

   In examples, "C:" represents lines sent by a protocol client and "S:"
   represents lines returned by a protocol server.  Indentation and
   white space in examples is provided only to illustrate element
   relationships and is not a REQUIRED feature of this protocol.




<span class="grey">Hollenbeck                  Standards Track                     [Page 2]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-3" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


<span class="h2"><a class="selflink" id="section-2" href="#section-2">2</a>.  Object Attributes</span>

   An EPP contact object has attributes and associated values that can
   be viewed and modified by the sponsoring client or the server.  This
   section describes each attribute type in detail.  The formal syntax
   for the attribute values described here can be found in the "Formal
   Syntax" section of this document and in the appropriate normative
   references.

<span class="h3"><a class="selflink" id="section-2.1" href="#section-2.1">2.1</a>.  Contact and Client Identifiers</span>

   All EPP contacts are identified by a server-unique identifier.
   Contact identifiers are character strings with a specified minimum
   length, a specified maximum length, and a specified format.  Contact
   identifiers use the "clIDType" client identifier syntax described in
   [<a href="./rfc3730" title="&quot;Extensible Provisioning Protocol (EPP)&quot;">RFC3730</a>].

<span class="h3"><a class="selflink" id="section-2.2" href="#section-2.2">2.2</a>.  Status Values</span>

   A contact object MUST always have at least one associated status
   value.  Status values can be set only by the client that sponsors a
   contact object and by the server on which the object resides.  A
   client can change the status of a contact object using the EPP
   &lt;update&gt; command.  Each status value MAY be accompanied by a string
   of human-readable text that describes the rationale for the status
   applied to the object.

   A client MUST NOT alter status values set by the server.  A server
   MAY alter or override status values set by a client subject to local
   server policies.  The status of an object MAY change as a result of
   either a client-initiated transform command or an action performed by
   a server operator.

   Status values that can be added or removed by a client are prefixed
   with "client".  Corresponding status values that can be added or
   removed by a server are prefixed with "server".  Status values that
   do not begin with either "client" or "server" are server-managed.

   Status Value Descriptions:

   -  clientDeleteProhibited, serverDeleteProhibited

   Requests to delete the object MUST be rejected.

   -  clientTransferProhibited, serverTransferProhibited

   Requests to transfer the object MUST be rejected.




<span class="grey">Hollenbeck                  Standards Track                     [Page 3]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-4" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


   -  clientUpdateProhibited, serverUpdateProhibited

   Requests to update the object (other than to remove this status) MUST
   be rejected.

   -  linked

   The contact object has at least one active association with another
   object, such as a domain object.  Servers SHOULD provide services to
   determine existing object associations.

   -  ok

   This is the normal status value for an object that has no pending
   operations or prohibitions.  This value is set and removed by the
   server as other status values are added or removed.

   -  pendingCreate, pendingDelete, pendingTransfer, pendingUpdate

   A transform command has been processed for the object, but the action
   has not been completed by the server.  Server operators can delay
   action completion for a variety of reasons, such as to allow for
   human review or third-party action.  A transform command that is
   processed, but whose requested action is pending, is noted with
   response code 1001.

   With one exception, transform commands MUST be rejected when a
   pendingCreate, pendingDelete, pendingTransfer, or pendingUpdate
   status is set.  The only exception is that a &lt;transfer&gt; command to
   approve, reject, or cancel a transfer MAY be processed while an
   object is in "pendingTransfer" status.

   When the requested action has been completed, the pendingCreate,
   pendingDelete, pendingTransfer, or pendingUpdate status value MUST be
   removed.  All clients involved in the transaction MUST be notified
   using a service message that the action has been completed and that
   the status of the object has changed.

   "ok" status MAY only be combined with "linked" status.

   "linked" status MAY be combined with any status.

   "pendingDelete" status MUST NOT be combined with either
   "clientDeleteProhibited" or "serverDeleteProhibited" status.

   "pendingTransfer" status MUST NOT be combined with either
   "clientTransferProhibited" or "serverTransferProhibited" status.




<span class="grey">Hollenbeck                  Standards Track                     [Page 4]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-5" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


   "pendingUpdate" status MUST NOT be combined with either
   "clientUpdateProhibited" or "serverUpdateProhibited" status.

   The pendingCreate, pendingDelete, pendingTransfer, and pendingUpdate
   status values MUST NOT be combined with each other.

   Other status combinations not expressly prohibited MAY be used.

<span class="h3"><a class="selflink" id="section-2.3" href="#section-2.3">2.3</a>.  Individual and Organizational Names</span>

   Individual and organizational names associated with a contact are
   represented using character strings.  These strings have a specified
   minimum length and a specified maximum length.  Individual and
   organizational names MAY be provided in both UTF-8 [<a href="./rfc2279" title="&quot;UTF-8, a transformation format of ISO 10646&quot;">RFC2279</a>] and a
   subset of UTF-8 that can be represented in 7-bit ASCII depending on
   local needs.

<span class="h3"><a class="selflink" id="section-2.4" href="#section-2.4">2.4</a>.  Address</span>

   Every contact has associated postal address information.  A postal
   address contains OPTIONAL street information, city information,
   OPTIONAL state/province information, an OPTIONAL postal code, and a
   country identifier.  Address information MAY be provided in both
   UTF-8 and a subset of UTF-8 that can be represented in 7-bit ASCII
   depending on local needs.

<span class="h4"><a class="selflink" id="section-2.4.1" href="#section-2.4.1">2.4.1</a>.  Street, City, and State or Province</span>

   Contact street, city, and state or province information is
   represented using character strings.  These strings have a specified
   minimum length and a specified maximum length.

<span class="h4"><a class="selflink" id="section-2.4.2" href="#section-2.4.2">2.4.2</a>.  Postal Code</span>

   Contact postal codes are represented using character strings.  These
   strings have a specified minimum length and a specified maximum
   length.

<span class="h4"><a class="selflink" id="section-2.4.3" href="#section-2.4.3">2.4.3</a>.  Country</span>

   Contact country identifiers are represented using two-character
   identifiers specified in [<a href="#ref-ISO3166" title="&quot;Codes for the representation of names of countries and their subdivisions - Part 1: Country codes&quot;">ISO3166</a>].

<span class="h3"><a class="selflink" id="section-2.5" href="#section-2.5">2.5</a>.  Telephone Numbers</span>

   Contact telephone number structure is derived from structures defined
   in [<a href="#ref-E164a" title="&quot;The International Public Telecommunication Numbering Plan&quot;">E164a</a>].  Telephone numbers described in this mapping are
   character strings that MUST begin with a plus sign ("+", ASCII value



<span class="grey">Hollenbeck                  Standards Track                     [Page 5]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-6" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


   0x002B), followed by a country code defined in [<a href="#ref-E164b" title="&quot;List of ITU-T Recommendation E.164 assigned country codes&quot;">E164b</a>], followed by a
   dot (".", ASCII value 0x002E), followed by a sequence of digits
   representing the telephone number.  An optional "x" attribute is
   provided to note telephone extension information.

<span class="h3"><a class="selflink" id="section-2.6" href="#section-2.6">2.6</a>.  Email Addresses</span>

   Email address syntax is defined in [<a href="./rfc2822" title="&quot;Internet Message Format&quot;">RFC2822</a>].  This mapping does not
   prescribe minimum or maximum lengths for character strings used to
   represent email addresses.

<span class="h3"><a class="selflink" id="section-2.7" href="#section-2.7">2.7</a>.  Dates and Times</span>

   Date and time attribute values MUST be represented in Universal
   Coordinated Time (UTC) using the Gregorian calendar.  The extended
   date-time form using upper case "T" and "Z" characters defined in
   [<a href="./rfc3339" title="&quot;Date and Time on the Internet: Timestamps&quot;">RFC3339</a>] MUST be used to represent date-time values as XML Schema
   does not support truncated date-time forms or lower case "T" and "Z"
   characters.

<span class="h3"><a class="selflink" id="section-2.8" href="#section-2.8">2.8</a>.  Authorization Information</span>

   Authorization information is associated with contact objects to
   facilitate transfer operations.  Authorization information is
   assigned when a contact object is created, and it might be updated in
   the future.  This specification describes password-based
   authorization information, though other mechanisms are possible.

<span class="h3"><a class="selflink" id="section-2.9" href="#section-2.9">2.9</a>.  Disclosure of Data Elements and Attributes</span>

   The EPP core protocol requires a server operator to announce data
   collection policies to clients; see <a href="./rfc3730#section-2.4">section&nbsp;2.4 of [RFC3730]</a>.  In
   conjunction with this disclosure requirement, this mapping includes
   data elements that allow a client to identify elements that require
   exceptional server operator handling to allow or restrict disclosure
   to third parties.

   A server operator announces a default disclosure policy when
   establishing a session with a client.  When an object is created or
   updated, the client can specify contact attributes that require
   exceptional disclosure handling using an OPTIONAL &lt;contact:disclose&gt;
   element.  Once set, disclosure preferences can be reviewed using a
   contact information query.  A server operator MUST reject any
   transaction that requests disclosure practices that do not conform to
   the announced data collection policy with a 2308 error response code.






<span class="grey">Hollenbeck                  Standards Track                     [Page 6]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-7" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


   If present, the &lt;contact:disclose&gt; element MUST contain a "flag"
   attribute.  The "flag" attribute contains an XML Schema boolean
   value.  A value of "true" or "1" (decimal one) notes a client
   preference to allow disclosure of the specified elements as an
   exception to the stated data collection policy.  A value of "false"
   or "0" (decimal zero) notes a client preference to not allow
   disclosure of the specified elements as an exception to the stated
   data collection policy.

   The &lt;contact:disclose&gt; element MUST contain at least one of the
   following child elements:

   &lt;contact:name type="int"&gt;
   &lt;contact:name type="loc"&gt;
   &lt;contact:org type="int"&gt;
   &lt;contact:org type="loc"&gt;
   &lt;contact:addr type="int"&gt;
   &lt;contact:addr type="loc"&gt;
   &lt;contact:voice&gt;
   &lt;contact:fax&gt;
   &lt;contact:email&gt;

   Example &lt;contact:disclose&gt; element, flag="0":

   &lt;contact:disclose flag="0"&gt;
     &lt;contact:email&gt;
     &lt;contact:voice&gt;
   &lt;/contact:disclose&gt;

   In this example, the contact email address and voice telephone number
   can not be disclosed.  All other elements are subject to disclosure
   in accordance with the server's data collection policy.

   Example &lt;contact:disclose&gt; element, flag="1":

   &lt;contact:disclose flag="1"&gt;
     &lt;contact:name type="int"&gt;
     &lt;contact:org type="int"&gt;
     &lt;contact:addr type="int"&gt;
   &lt;/contact:disclose&gt;

   In this example, the internationalized contact name, organization,
   and address information can be disclosed.  All other elements are
   subject to disclosure in accordance with the server's data collection
   policy.






<span class="grey">Hollenbeck                  Standards Track                     [Page 7]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-8" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


   Client identification features provided by the EPP &lt;login&gt; command
   and contact authorization information are used to determine if a
   client is authorized to perform contact information query commands.
   These features also determine if a client is authorized to receive
   data that is otherwise marked for non-disclosure in a query response.

<span class="h2"><a class="selflink" id="section-3" href="#section-3">3</a>.  EPP Command mapping</span>

   A detailed description of the EPP syntax and semantics can be found
   in [<a href="./rfc3730" title="&quot;Extensible Provisioning Protocol (EPP)&quot;">RFC3730</a>].  The command mappings described here are specifically
   for use in provisioning and managing contact objects via EPP.

<span class="h3"><a class="selflink" id="section-3.1" href="#section-3.1">3.1</a>.  EPP Query Commands</span>

   EPP provides three commands to retrieve contact information: &lt;check&gt;
   to determine if a contact object can be provisioned within a
   repository, &lt;info&gt; to retrieve detailed information associated with a
   contact object, and &lt;transfer&gt; to retrieve contact object transfer
   status information.

<span class="h4"><a class="selflink" id="section-3.1.1" href="#section-3.1.1">3.1.1</a>.  EPP &lt;check&gt; Command</span>

   The EPP &lt;check&gt; command is used to determine if an object can be
   provisioned within a repository.  It provides a hint that allows a
   client to anticipate the success or failure of provisioning an object
   using the &lt;create&gt; command as object provisioning requirements are
   ultimately a matter of server policy.

   In addition to the standard EPP command elements, the &lt;check&gt; command
   MUST contain a &lt;contact:check&gt; element that identifies the contact
   namespace and the location of the contact schema.  The
   &lt;contact:check&gt; element contains the following child elements:

   -  One or more &lt;contact:id&gt; elements that contain the server-unique
   identifier of the contact objects to be queried.

   Example &lt;check&gt; command:

   C:&lt;?xml version="1.0" encoding="UTF-8" standalone="no"?&gt;
   C:&lt;epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
   C:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
   C:     xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0
   C:     epp-1.0.xsd"&gt;
   C:  &lt;command&gt;
   C:    &lt;check&gt;
   C:      &lt;contact:check
   C:       xmlns:contact="urn:ietf:params:xml:ns:contact-1.0"
   C:       xsi:schemaLocation="urn:ietf:params:xml:ns:contact-1.0



<span class="grey">Hollenbeck                  Standards Track                     [Page 8]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-9" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


   C:       contact-1.0.xsd"&gt;
   C:        &lt;contact:id&gt;sh8013&lt;/contact:id&gt;
   C:        &lt;contact:id&gt;sah8013&lt;/contact:id&gt;
   C:        &lt;contact:id&gt;8013sah&lt;/contact:id&gt;
   C:      &lt;/contact:check&gt;
   C:    &lt;/check&gt;
   C:    &lt;clTRID&gt;ABC-12345&lt;/clTRID&gt;
   C:  &lt;/command&gt;
   C:&lt;/epp&gt;

   When a &lt;check&gt; command has been processed successfully, the EPP
   &lt;resData&gt; element MUST contain a child &lt;contact:chkData&gt; element that
   identifies the contact namespace and the location of the contact
   schema.  The &lt;contact:chkData&gt; element contains one or more
   &lt;contact:cd&gt; elements that contain the following child elements:

   -  A &lt;contact:id&gt; element that identifies the queried object.  This
      element MUST contain an "avail" attribute whose value indicates
      object availability (can it be provisioned or not) at the moment
      the &lt;check&gt; command was completed.  A value of "1" or "true" means
      that the object can be provisioned.  A value of "0" or "false"
      means that the object can not be provisioned.

   -  An OPTIONAL &lt;contact:reason&gt; element that MAY be provided when an
      object can not be provisioned.  If present, this element contains
      server-specific text to help explain why the object can not be
      provisioned.  This text MUST be represented in the response
      language previously negotiated with the client; an OPTIONAL "lang"
      attribute MAY be present to identify the language if the
      negotiated value is something other than the default value of "en"
      (English).

   Example &lt;check&gt; response:

   S:&lt;?xml version="1.0" encoding="UTF-8" standalone="no"?&gt;
   S:&lt;epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
   S:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
   S:     xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0
   S:     epp-1.0.xsd"&gt;
   S:  &lt;response&gt;
   S:    &lt;result code="1000"&gt;
   S:      &lt;msg&gt;Command completed successfully&lt;/msg&gt;
   S:    &lt;/result&gt;
   S:    &lt;resData&gt;
   S:      &lt;contact:chkData
   S:       xmlns:contact="urn:ietf:params:xml:ns:contact-1.0"
   S:       xsi:schemaLocation="urn:ietf:params:xml:ns:contact-1.0
   S:       contact-1.0.xsd"&gt;



<span class="grey">Hollenbeck                  Standards Track                     [Page 9]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-10" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


   S:        &lt;contact:cd&gt;
   S:          &lt;contact:id avail="1"&gt;sh8013&lt;/contact:id&gt;
   S:        &lt;/contact:cd&gt;
   S:        &lt;contact:cd&gt;
   S:          &lt;contact:id avail="0"&gt;sah8013&lt;/contact:id&gt;
   S:          &lt;contact:reason&gt;In use&lt;/contact:reason&gt;
   S:        &lt;/contact:cd&gt;
   S:        &lt;contact:cd&gt;
   S:          &lt;contact:id avail="1"&gt;8013sah&lt;/contact:id&gt;
   S:        &lt;/contact:cd&gt;
   S:      &lt;/contact:chkData&gt;
   S:    &lt;/resData&gt;
   S:    &lt;trID&gt;
   S:      &lt;clTRID&gt;ABC-12345&lt;/clTRID&gt;
   S:      &lt;svTRID&gt;54322-XYZ&lt;/svTRID&gt;
   S:    &lt;/trID&gt;
   S:  &lt;/response&gt;
   S:&lt;/epp&gt;

   An EPP error response MUST be returned if a &lt;check&gt; command can not
   be processed for any reason.

<span class="h4"><a class="selflink" id="section-3.1.2" href="#section-3.1.2">3.1.2</a>.  EPP &lt;info&gt; Command</span>

   The EPP &lt;info&gt; command is used to retrieve information associated
   with a contact object.  In addition to the standard EPP command
   elements, the &lt;info&gt; command MUST contain a &lt;contact:info&gt; element
   that identifies the contact namespace and the location of the contact
   schema.  The &lt;contact:info&gt; element contains the following child
   elements:

   -  A &lt;contact:id&gt; element that contains the server-unique identifier
      of the contact object to be queried.

   -  An OPTIONAL &lt;contact:authInfo&gt; element that contains authorization
      information associated with the contact object.  If this element
      is not provided or if the authorization information is invalid,
      server policy determines if the command is rejected or if response
      information will be returned to the client.

   Example &lt;info&gt; command:

   C:&lt;?xml version="1.0" encoding="UTF-8" standalone="no"?&gt;
   C:&lt;epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
   C:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
   C:     xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0
   C:     epp-1.0.xsd"&gt;
   C:  &lt;command&gt;



<span class="grey">Hollenbeck                  Standards Track                    [Page 10]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-11" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


   C:    &lt;info&gt;
   C:      &lt;contact:info
   C:       xmlns:contact="urn:ietf:params:xml:ns:contact-1.0"
   C:       xsi:schemaLocation="urn:ietf:params:xml:ns:contact-1.0
   C:       contact-1.0.xsd"&gt;
   C:        &lt;contact:id&gt;sh8013&lt;/contact:id&gt;
   C:        &lt;contact:authInfo&gt;
   C:          &lt;contact:pw&gt;2fooBAR&lt;/contact:pw&gt;
   C:        &lt;/contact:authInfo&gt;
   C:      &lt;/contact:info&gt;
   C:    &lt;/info&gt;
   C:    &lt;clTRID&gt;ABC-12345&lt;/clTRID&gt;
   C:  &lt;/command&gt;
   C:&lt;/epp&gt;

   When an &lt;info&gt; command has been processed successfully, the EPP
   &lt;resData&gt; element MUST contain a child &lt;contact:infData&gt; element that
   identifies the contact namespace and the location of the contact
   schema.  The &lt;contact:infData&gt; element contains the following child
   elements:

   -  A &lt;contact:id&gt; element that contains the server-unique identifier
      of the contact object.

   -  A &lt;contact:roid&gt; element that contains the Repository Object
      IDentifier assigned to the contact object when the object was
      created.

   -  One or more &lt;contact:status&gt; elements that describe the status of
      the contact object.

   -  One or two &lt;contact:postalInfo&gt; elements that contain postal
      address information.  Two elements are provided so that address
      information can be provided in both internationalized and
      localized forms; a "type" attribute is used to identify the two
      forms.  If an internationalized form (type="int") is provided,
      element content MUST be represented in a subset of UTF-8 that can
      be represented in the 7-bit US-ASCII character set.  If a
      localized form (type="loc") is provided, element content MAY be
      represented in unrestricted UTF-8.  The &lt;contact:postalInfo&gt;
      element contains the following child elements:

      -  A &lt;contact:name&gt; element that contains the name of the
         individual or role represented by the contact.

      -  An OPTIONAL &lt;contact:org&gt; element that contains the name of the
         organization with which the contact is affiliated.




<span class="grey">Hollenbeck                  Standards Track                    [Page 11]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-12" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


      -  A &lt;contact:addr&gt; element that contains address information
         associated with the contact.  A &lt;contact:addr&gt; element contains
         the following child elements:

         -  One, two, or three OPTIONAL &lt;contact:street&gt; elements that
            contain the contact's street address.

         -  A &lt;contact:city&gt; element that contains the contact's city.

         -  An OPTIONAL &lt;contact:sp&gt; element that contains the contact's
            state or province.

         -  An OPTIONAL &lt;contact:pc&gt; element that contains the contact's
            postal code.

         -  A &lt;contact:cc&gt; element that contains the contact's country
            code.

   -  An OPTIONAL &lt;contact:voice&gt; element that contains the contact's
      voice telephone number.

   -  An OPTIONAL &lt;contact:fax&gt; element that contains the contact's
      facsimile telephone number.

   -  A &lt;contact:email&gt; element that contains the contact's email
      address.

   -  A &lt;contact:clID&gt; element that contains the identifier of the
      sponsoring client.

   -  A &lt;contact:crID&gt; element that contains the identifier of the
      client that created the contact object.

   -  A &lt;contact:crDate&gt; element that contains the date and time of
      contact object creation.

   -  A &lt;contact:upID&gt; element that contains the identifier of the
      client that last updated the contact object.  This element MUST
      NOT be present if the contact has never been modified.

   -  A &lt;contact:upDate&gt; element that contains the date and time of the
      most recent contact object modification.  This element MUST NOT be
      present if the contact object has never been modified.

   -  A &lt;contact:trDate&gt; element that contains the date and time of the
      most recent successful contact object transfer.  This element MUST
      NOT be provided if the contact object has never been transferred.




<span class="grey">Hollenbeck                  Standards Track                    [Page 12]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-13" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


   -  A &lt;contact:authInfo&gt; element that contains authorization
      information associated with the contact object.  This element MUST
      NOT be provided if the querying client is not the current
      sponsoring client.

   -  An OPTIONAL &lt;contact:disclose&gt; element that identifies elements
      that require exceptional server operator handling to allow or
      restrict disclosure to third parties.  See <a href="#section-2.9">section 2.9</a>. for a
      description of the child elements contained within the
      &lt;contact:disclose&gt; element.

   Example &lt;info&gt; response for an authorized client:

   S:&lt;?xml version="1.0" encoding="UTF-8" standalone="no"?&gt;
   S:&lt;epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
   S:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
   S:     xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0
   S:     epp-1.0.xsd"&gt;
   S:  &lt;response&gt;
   S:    &lt;result code="1000"&gt;
   S:      &lt;msg&gt;Command completed successfully&lt;/msg&gt;
   S:    &lt;/result&gt;
   S:    &lt;resData&gt;
   S:      &lt;contact:infData
   S:       xmlns:contact="urn:ietf:params:xml:ns:contact-1.0"
   S:       xsi:schemaLocation="urn:ietf:params:xml:ns:contact-1.0
   S:       contact-1.0.xsd"&gt;
   S:        &lt;contact:id&gt;sh8013&lt;/contact:id&gt;
   S:        &lt;contact:roid&gt;SH8013-REP&lt;/contact:roid&gt;
   S:        &lt;contact:status s="linked"/&gt;
   S:        &lt;contact:status s="clientDeleteProhibited"/&gt;
   S:        &lt;contact:postalInfo type="int"&gt;
   S:          &lt;contact:name&gt;John Doe&lt;/contact:name&gt;
   S:          &lt;contact:org&gt;Example Inc.&lt;/contact:org&gt;
   S:          &lt;contact:addr&gt;
   S:            &lt;contact:street&gt;123 Example Dr.&lt;/contact:street&gt;
   S:            &lt;contact:street&gt;Suite 100&lt;/contact:street&gt;
   S:            &lt;contact:city&gt;Dulles&lt;/contact:city&gt;
   S:            &lt;contact:sp&gt;VA&lt;/contact:sp&gt;
   S:            &lt;contact:pc&gt;20166-6503&lt;/contact:pc&gt;
   S:            &lt;contact:cc&gt;US&lt;/contact:cc&gt;
   S:          &lt;/contact:addr&gt;
   S:        &lt;/contact:postalInfo&gt;
   S:        &lt;contact:voice x="1234"&gt;+1.7035555555&lt;/contact:voice&gt;
   S:        &lt;contact:fax&gt;+1.7035555556&lt;/contact:fax&gt;
   S:        &lt;contact:email&gt;jdoe@example.com&lt;/contact:email&gt;
   S:        &lt;contact:clID&gt;ClientY&lt;/contact:clID&gt;
   S:        &lt;contact:crID&gt;ClientX&lt;/contact:crID&gt;



<span class="grey">Hollenbeck                  Standards Track                    [Page 13]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-14" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


   S:        &lt;contact:crDate&gt;1999-04-03T22:00:00.0Z&lt;/contact:crDate&gt;
   S:        &lt;contact:upID&gt;ClientX&lt;/contact:upID&gt;
   S:        &lt;contact:upDate&gt;1999-12-03T09:00:00.0Z&lt;/contact:upDate&gt;
   S:        &lt;contact:trDate&gt;2000-04-08T09:00:00.0Z&lt;/contact:trDate&gt;
   S:        &lt;contact:authInfo&gt;
   S:          &lt;contact:pw&gt;2fooBAR&lt;/contact:pw&gt;
   S:        &lt;/contact:authInfo&gt;
   S:        &lt;contact:disclose flag="0"&gt;
   S:          &lt;contact:voice/&gt;
   S:          &lt;contact:email/&gt;
   S:        &lt;/contact:disclose&gt;
   S:      &lt;/contact:infData&gt;
   S:    &lt;/resData&gt;
   S:    &lt;trID&gt;
   S:      &lt;clTRID&gt;ABC-12345&lt;/clTRID&gt;
   S:      &lt;svTRID&gt;54322-XYZ&lt;/svTRID&gt;
   S:    &lt;/trID&gt;
   S:  &lt;/response&gt;
   S:&lt;/epp&gt;

   An EPP error response MUST be returned if an &lt;info&gt; command can not
   be processed for any reason.

<span class="h4"><a class="selflink" id="section-3.1.3" href="#section-3.1.3">3.1.3</a>.  EPP &lt;transfer&gt; Query Command</span>

   The EPP &lt;transfer&gt; command provides a query operation that allows a
   client to determine real-time status of pending and completed
   transfer requests.  In addition to the standard EPP command elements,
   the &lt;transfer&gt; command MUST contain an "op" attribute with value
   "query", and a &lt;contact:transfer&gt; element that identifies the contact
   namespace and the location of the contact schema.  The
   &lt;contact:transfer&gt; element MUST contain the following child elements:

   -  A &lt;contact:id&gt; element that contains the server-unique identifier
      of the contact object to be queried.

   -  An OPTIONAL &lt;contact:authInfo&gt; element that contains authorization
      information associated with the contact object.  If this element
      is not provided or if the authorization information is invalid,
      server policy determines whether the command is rejected or the
      response information will be returned to the client.

   Example &lt;transfer&gt; query command:

   C:&lt;?xml version="1.0" encoding="UTF-8" standalone="no"?&gt;
   C:&lt;epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
   C:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
   C:     xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0



<span class="grey">Hollenbeck                  Standards Track                    [Page 14]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-15" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


   C:     epp-1.0.xsd"&gt;
   C:  &lt;command&gt;
   C:    &lt;transfer op="query"&gt;
   C:      &lt;contact:transfer
   C:       xmlns:contact="urn:ietf:params:xml:ns:contact-1.0"
   C:       xsi:schemaLocation="urn:ietf:params:xml:ns:contact-1.0
   C:       contact-1.0.xsd"&gt;
   C:        &lt;contact:id&gt;sh8013&lt;/contact:id&gt;
   C:        &lt;contact:authInfo&gt;
   C:          &lt;contact:pw&gt;2fooBAR&lt;/contact:pw&gt;
   C:        &lt;/contact:authInfo&gt;
   C:      &lt;/contact:transfer&gt;
   C:    &lt;/transfer&gt;
   C:    &lt;clTRID&gt;ABC-12345&lt;/clTRID&gt;
   C:  &lt;/command&gt;
   C:&lt;/epp&gt;

   When a &lt;transfer&gt; query command has been processed successfully, the
   EPP &lt;resData&gt; element MUST contain a child &lt;contact:trnData&gt; element
   that identifies the contact namespace and the location of the contact
   schema.  The &lt;contact:trnData&gt; element contains the following child
   elements:

   -  A &lt;contact:id&gt; element that contains the server-unique identifier
      for the queried contact.

   -  A &lt;contact:trStatus&gt; element that contains the state of the most
      recent transfer request.

   -  A &lt;contact:reID&gt; element that contains the identifier of the
      client that requested the object transfer.

   -  A &lt;contact:reDate&gt; element that contains the date and time that
      the transfer was requested.

   -  A &lt;contact:acID&gt; element that contains the identifier of the
      client that SHOULD act upon the transfer request.

   -  A &lt;contact:acDate&gt; element that contains the date and time of a
      required or completed response.  For a pending request, the value
      identifies the date and time by which a response is required
      before an automated response action SHOULD be taken by the server.
      For all other status types, the value identifies the date and time
      when the request was completed.







<span class="grey">Hollenbeck                  Standards Track                    [Page 15]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-16" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


   Example &lt;transfer&gt; query response:

   S:&lt;?xml version="1.0" encoding="UTF-8" standalone="no"?&gt;
   S:&lt;epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
   S:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
   S:     xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0
   S:     epp-1.0.xsd"&gt;
   S:  &lt;response&gt;
   S:    &lt;result code="1000"&gt;
   S:      &lt;msg&gt;Command completed successfully&lt;/msg&gt;
   S:    &lt;/result&gt;
   S:    &lt;resData&gt;
   S:      &lt;contact:trnData
   S:       xmlns:contact="urn:ietf:params:xml:ns:contact-1.0"
   S:       xsi:schemaLocation="urn:ietf:params:xml:ns:contact-1.0
   S:       contact-1.0.xsd"&gt;
   S:        &lt;contact:id&gt;sh8013&lt;/contact:id&gt;
   S:        &lt;contact:trStatus&gt;pending&lt;/contact:trStatus&gt;
   S:        &lt;contact:reID&gt;ClientX&lt;/contact:reID&gt;
   S:        &lt;contact:reDate&gt;2000-06-06T22:00:00.0Z&lt;/contact:reDate&gt;
   S:        &lt;contact:acID&gt;ClientY&lt;/contact:acID&gt;
   S:        &lt;contact:acDate&gt;2000-06-11T22:00:00.0Z&lt;/contact:acDate&gt;
   S:      &lt;/contact:trnData&gt;
   S:    &lt;/resData&gt;
   S:    &lt;trID&gt;
   S:      &lt;clTRID&gt;ABC-12345&lt;/clTRID&gt;
   S:      &lt;svTRID&gt;54322-XYZ&lt;/svTRID&gt;
   S:    &lt;/trID&gt;
   S:  &lt;/response&gt;
   S:&lt;/epp&gt;

   An EPP error response MUST be returned if a &lt;transfer&gt; query command
   can not be processed for any reason.

<span class="h3"><a class="selflink" id="section-3.2" href="#section-3.2">3.2</a>.  EPP Transform Commands</span>

   EPP provides four commands to transform contact object information:
   &lt;create&gt; to create an instance of a contact object, &lt;delete&gt; to
   delete an instance of a contact object, &lt;transfer&gt; to manage contact
   object sponsorship changes, and &lt;update&gt; to change information
   associated with a contact object.  This document does not define a
   mapping for the EPP &lt;renew&gt; command.

   Transform commands are typically processed and completed in real
   time.  Server operators MAY receive and process transform commands,
   but defer completing the requested action if human or third-party
   review is required before the requested action can be completed.  In
   such situations the server MUST return a 1001 response code to the



<span class="grey">Hollenbeck                  Standards Track                    [Page 16]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-17" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


   client to note that the command has been received and processed, but
   the requested action is pending.  The server MUST also manage the
   status of the object that is the subject of the command to reflect
   the initiation and completion of the requested action.  Once the
   action has been completed, all clients involved in the transaction
   MUST be notified using a service message that the action has been
   completed and that the status of the object has changed.

<span class="h4"><a class="selflink" id="section-3.2.1" href="#section-3.2.1">3.2.1</a>.  EPP &lt;create&gt; Command</span>

   The EPP &lt;create&gt; command provides a transform operation that allows a
   client to create a contact object.  In addition to the standard EPP
   command elements, the &lt;create&gt; command MUST contain a
   &lt;contact:create&gt; element that identifies the contact namespace and
   the location of the contact schema.  The &lt;contact:create&gt; element
   contains the following child elements:

   -  A &lt;contact:id&gt; element that contains the desired server-unique
      identifier for the contact to be created.

   -  One or two &lt;contact:postalInfo&gt; elements that contain postal
      address information.  Two elements are provided so that address
      information can be provided in both internationalized and
      localized forms; a "type" attribute is used to identify the two
      forms.  If an internationalized form (type="int") is provided,
      element content MUST be represented in a subset of UTF-8 that can
      be represented in the 7-bit US-ASCII character set.  If a
      localized form (type="loc") is provided, element content MAY be
      represented in unrestricted UTF-8.  The &lt;contact:postalInfo&gt;
      element contains the following child elements:

      -  A &lt;contact:name&gt; element that contains the name of the
         individual or role represented by the contact.

      -  An OPTIONAL &lt;contact:org&gt; element that contains the name of the
         organization with which the contact is affiliated.

      -  A &lt;contact:addr&gt; element that contains address information
         associated with the contact.  A &lt;contact:addr&gt; element contains
         the following child elements:

         -  One, two, or three OPTIONAL &lt;contact:street&gt; elements that
            contain the contact's street address.

         -  A &lt;contact:city&gt; element that contains the contact's city.

         -  An OPTIONAL &lt;contact:sp&gt; element that contains the contact's
            state or province.



<span class="grey">Hollenbeck                  Standards Track                    [Page 17]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-18" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


         -  An OPTIONAL &lt;contact:pc&gt; element that contains the contact's
            postal code.

         -  A &lt;contact:cc&gt; element that contains the contact's country
            code.

   -  An OPTIONAL &lt;contact:voice&gt; element that contains the contact's
      voice telephone number.

   -  An OPTIONAL &lt;contact:fax&gt; element that contains the contact's
      facsimile telephone number.

   -  A &lt;contact:email&gt; element that contains the contact's email
      address.

   -  A &lt;contact:authInfo&gt; element that contains authorization
      information to be associated with the contact object.  This
      mapping includes a password-based authentication mechanism, but
      the schema allows new mechanisms to be defined in new schemas.

   -  An OPTIONAL &lt;contact:disclose&gt; element that allows a client to
      identify elements that require exceptional server operator
      handling to allow or restrict disclosure to third parties.  See
      <a href="#section-2.9">section 2.9</a> for a description of the child elements contained
      within the &lt;contact:disclose&gt; element.

   Example &lt;create&gt; command:

   C:&lt;?xml version="1.0" encoding="UTF-8" standalone="no"?&gt;
   C:&lt;epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
   C:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
   C:     xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0
   C:     epp-1.0.xsd"&gt;
   C:  &lt;command&gt;
   C:    &lt;create&gt;
   C:      &lt;contact:create
   C:       xmlns:contact="urn:ietf:params:xml:ns:contact-1.0"
   C:       xsi:schemaLocation="urn:ietf:params:xml:ns:contact-1.0
   C:       contact-1.0.xsd"&gt;
   C:        &lt;contact:id&gt;sh8013&lt;/contact:id&gt;
   C:        &lt;contact:postalInfo type="int"&gt;
   C:          &lt;contact:name&gt;John Doe&lt;/contact:name&gt;
   C:          &lt;contact:org&gt;Example Inc.&lt;/contact:org&gt;
   C:          &lt;contact:addr&gt;
   C:            &lt;contact:street&gt;123 Example Dr.&lt;/contact:street&gt;
   C:            &lt;contact:street&gt;Suite 100&lt;/contact:street&gt;
   C:            &lt;contact:city&gt;Dulles&lt;/contact:city&gt;
   C:            &lt;contact:sp&gt;VA&lt;/contact:sp&gt;



<span class="grey">Hollenbeck                  Standards Track                    [Page 18]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-19" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


   C:            &lt;contact:pc&gt;20166-6503&lt;/contact:pc&gt;
   C:            &lt;contact:cc&gt;US&lt;/contact:cc&gt;
   C:          &lt;/contact:addr&gt;
   C:        &lt;/contact:postalInfo&gt;
   C:        &lt;contact:voice x="1234"&gt;+1.7035555555&lt;/contact:voice&gt;
   C:        &lt;contact:fax&gt;+1.7035555556&lt;/contact:fax&gt;
   C:        &lt;contact:email&gt;jdoe@example.com&lt;/contact:email&gt;
   C:        &lt;contact:authInfo&gt;
   C:          &lt;contact:pw&gt;2fooBAR&lt;/contact:pw&gt;
   C:        &lt;/contact:authInfo&gt;
   C:        &lt;contact:disclose flag="0"&gt;
   C:          &lt;contact:voice/&gt;
   C:          &lt;contact:email/&gt;
   C:        &lt;/contact:disclose&gt;
   C:      &lt;/contact:create&gt;
   C:    &lt;/create&gt;
   C:    &lt;clTRID&gt;ABC-12345&lt;/clTRID&gt;
   C:  &lt;/command&gt;
   C:&lt;/epp&gt;

   When a &lt;create&gt; command has been processed successfully, the EPP
   &lt;resData&gt; element MUST contain a child &lt;contact:creData&gt; element that
   identifies the contact namespace and the location of the contact
   schema.  The &lt;contact:creData&gt; element contains the following child
   elements:

   -  A &lt;contact:id&gt; element that contains the server-unique identifier
      for the created contact.

   -  A &lt;contact:crDate&gt; element that contains the date and time of
      contact object creation.

   Example &lt;create&gt; response:

   S:&lt;?xml version="1.0" encoding="UTF-8" standalone="no"?&gt;
   S:&lt;epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
   S:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
   S:     xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0
   S:     epp-1.0.xsd"&gt;
   S:  &lt;response&gt;
   S:    &lt;result code="1000"&gt;
   S:      &lt;msg&gt;Command completed successfully&lt;/msg&gt;
   S:    &lt;/result&gt;
   S:    &lt;resData&gt;
   S:      &lt;contact:creData
   S:       xmlns:contact="urn:ietf:params:xml:ns:contact-1.0"
   S:       xsi:schemaLocation="urn:ietf:params:xml:ns:contact-1.0
   S:       contact-1.0.xsd"&gt;



<span class="grey">Hollenbeck                  Standards Track                    [Page 19]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-20" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


   S:        &lt;contact:id&gt;sh8013&lt;/contact:id&gt;
   S:        &lt;contact:crDate&gt;1999-04-03T22:00:00.0Z&lt;/contact:crDate&gt;
   S:      &lt;/contact:creData&gt;
   S:    &lt;/resData&gt;
   S:    &lt;trID&gt;
   S:      &lt;clTRID&gt;ABC-12345&lt;/clTRID&gt;
   S:      &lt;svTRID&gt;54321-XYZ&lt;/svTRID&gt;
   S:    &lt;/trID&gt;
   S:  &lt;/response&gt;
   S:&lt;/epp&gt;

   An EPP error response MUST be returned if a &lt;create&gt; command can not
   be processed for any reason.

<span class="h4"><a class="selflink" id="section-3.2.2" href="#section-3.2.2">3.2.2</a>.  EPP &lt;delete&gt; Command</span>

   The EPP &lt;delete&gt; command provides a transform operation that allows a
   client to delete a contact object.  In addition to the standard EPP
   command elements, the &lt;delete&gt; command MUST contain a
   &lt;contact:delete&gt; element that identifies the contact namespace and
   the location of the contact schema.  The &lt;contact:delete&gt; element
   MUST contain the following child element:

   -  A &lt;contact:id&gt; element that contains the server-unique identifier
      of the contact object to be deleted.

      A contact object SHOULD NOT be deleted if it is associated with
      other known objects.  An associated contact SHOULD NOT be deleted
      until associations with other known objects have been broken.  A
      server SHOULD notify clients of object relationships when a
      &lt;delete&gt; command is attempted and fails due to existing object
      relationships.

   Example &lt;delete&gt; command:

   C:&lt;?xml version="1.0" encoding="UTF-8" standalone="no"?&gt;
   C:&lt;epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
   C:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
   C:     xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0
   C:     epp-1.0.xsd"&gt;
   C:  &lt;command&gt;
   C:    &lt;delete&gt;
   C:      &lt;contact:delete
   C:       xmlns:contact="urn:ietf:params:xml:ns:contact-1.0"
   C:       xsi:schemaLocation="urn:ietf:params:xml:ns:contact-1.0
   C:       contact-1.0.xsd"&gt;
   C:        &lt;contact:id&gt;sh8013&lt;/contact:id&gt;
   C:      &lt;/contact:delete&gt;



<span class="grey">Hollenbeck                  Standards Track                    [Page 20]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-21" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


   C:    &lt;/delete&gt;
   C:    &lt;clTRID&gt;ABC-12345&lt;/clTRID&gt;
   C:  &lt;/command&gt;
   C:&lt;/epp&gt;

   When a &lt;delete&gt; command has been processed successfully, a server
   MUST respond with an EPP response with no &lt;resData&gt; element.

   Example &lt;delete&gt; response:

   S:&lt;?xml version="1.0" encoding="UTF-8" standalone="no"?&gt;
   S:&lt;epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
   S:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
   S:     xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0
   S:     epp-1.0.xsd"&gt;
   S:  &lt;response&gt;
   S:    &lt;result code="1000"&gt;
   S:      &lt;msg&gt;Command completed successfully&lt;/msg&gt;
   S:    &lt;/result&gt;
   S:    &lt;trID&gt;
   S:      &lt;clTRID&gt;ABC-12345&lt;/clTRID&gt;
   S:      &lt;svTRID&gt;54321-XYZ&lt;/svTRID&gt;
   S:    &lt;/trID&gt;
   S:  &lt;/response&gt;
   S:&lt;/epp&gt;

   An EPP error response MUST be returned if a &lt;delete&gt; command can not
   be processed for any reason.

<span class="h4"><a class="selflink" id="section-3.2.3" href="#section-3.2.3">3.2.3</a>.  EPP &lt;renew&gt; Command</span>

   Renewal semantics do not apply to contact objects, so there is no
   mapping defined for the EPP &lt;renew&gt; command.

<span class="h4"><a class="selflink" id="section-3.2.4" href="#section-3.2.4">3.2.4</a>.  EPP &lt;transfer&gt; Command</span>

   The EPP &lt;transfer&gt; command provides a transform operation that allows
   a client to manage requests to transfer the sponsorship of a contact
   object.  In addition to the standard EPP command elements, the
   &lt;transfer&gt; command MUST contain a &lt;contact:transfer&gt; element that
   identifies the contact namespace and the location of the contact
   schema.  The &lt;contact:transfer&gt; element contains the following child
   elements:

   -  A &lt;contact:id&gt; element that contains the server-unique identifier
      of the contact object for which a transfer request is to be
      created, approved, rejected, or cancelled.




<span class="grey">Hollenbeck                  Standards Track                    [Page 21]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-22" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


   -  A &lt;contact:authInfo&gt; element that contains authorization
      information associated with the contact object.

      Every EPP &lt;transfer&gt; command MUST contain an "op" attribute that
      identifies the transfer operation to be performed as defined in
      [<a href="./rfc3730" title="&quot;Extensible Provisioning Protocol (EPP)&quot;">RFC3730</a>].

   Example &lt;transfer&gt; request command:

   C:&lt;?xml version="1.0" encoding="UTF-8" standalone="no"?&gt;
   C:&lt;epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
   C:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
   C:     xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0
   C:     epp-1.0.xsd"&gt;
   C:  &lt;command&gt;
   C:    &lt;transfer op="request"&gt;
   C:      &lt;contact:transfer
   C:       xmlns:contact="urn:ietf:params:xml:ns:contact-1.0"
   C:       xsi:schemaLocation="urn:ietf:params:xml:ns:contact-1.0
   C:       contact-1.0.xsd"&gt;
   C:        &lt;contact:id&gt;sh8013&lt;/contact:id&gt;
   C:        &lt;contact:authInfo&gt;
   C:          &lt;contact:pw&gt;2fooBAR&lt;/contact:pw&gt;
   C:        &lt;/contact:authInfo&gt;
   C:      &lt;/contact:transfer&gt;
   C:    &lt;/transfer&gt;
   C:    &lt;clTRID&gt;ABC-12345&lt;/clTRID&gt;
   C:  &lt;/command&gt;
   C:&lt;/epp&gt;

   When a &lt;transfer&gt; command has been processed successfully, the EPP
   &lt;resData&gt; element MUST contain a child &lt;contact:trnData&gt; element that
   identifies the contact namespace and the location of the contact
   schema.  The &lt;contact:trnData&gt; element contains the same child
   elements defined for a transfer query response.

   Example &lt;transfer&gt; response:

   S:&lt;?xml version="1.0" encoding="UTF-8" standalone="no"?&gt;
   S:&lt;epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
   S:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
   S:     xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0
   S:     epp-1.0.xsd"&gt;
   S:  &lt;response&gt;
   S:    &lt;result code="1000"&gt;
   S:      &lt;msg&gt;Command completed successfully&lt;/msg&gt;
   S:    &lt;/result&gt;
   S:    &lt;resData&gt;



<span class="grey">Hollenbeck                  Standards Track                    [Page 22]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-23" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


   S:      &lt;contact:trnData
   S:       xmlns:contact="urn:ietf:params:xml:ns:contact-1.0"
   S:       xsi:schemaLocation="urn:ietf:params:xml:ns:contact-1.0
   S:       contact-1.0.xsd"&gt;
   S:        &lt;contact:id&gt;sh8013&lt;/contact:id&gt;
   S:        &lt;contact:trStatus&gt;pending&lt;/contact:trStatus&gt;
   S:        &lt;contact:reID&gt;ClientX&lt;/contact:reID&gt;
   S:        &lt;contact:reDate&gt;2000-06-08T22:00:00.0Z&lt;/contact:reDate&gt;
   S:        &lt;contact:acID&gt;ClientY&lt;/contact:acID&gt;
   S:        &lt;contact:acDate&gt;2000-06-13T22:00:00.0Z&lt;/contact:acDate&gt;
   S:      &lt;/contact:trnData&gt;
   S:    &lt;/resData&gt;
   S:    &lt;trID&gt;
   S:      &lt;clTRID&gt;ABC-12345&lt;/clTRID&gt;
   S:      &lt;svTRID&gt;54322-XYZ&lt;/svTRID&gt;
   S:    &lt;/trID&gt;
   S:  &lt;/response&gt;
   S:&lt;/epp&gt;

   An EPP error response MUST be returned if a &lt;transfer&gt; command can
   not be processed for any reason.

<span class="h4"><a class="selflink" id="section-3.2.5" href="#section-3.2.5">3.2.5</a>.  EPP &lt;update&gt; Command</span>

   The EPP &lt;update&gt; command provides a transform operation that allows a
   client to modify the attributes of a contact object.  In addition to
   the standard EPP command elements, the &lt;update&gt; command MUST contain
   a &lt;contact:update&gt; element that identifies the contact namespace and
   the location of the contact schema.  The &lt;contact:update&gt; element
   contains the following child elements:

   -  A &lt;contact:id&gt; element that contains the server-unique identifier
      of the contact object to be updated.

   -  An OPTIONAL &lt;contact:add&gt; element that contains attribute values
      to be added to the object.

   -  An OPTIONAL &lt;contact:rem&gt; element that contains attribute values
      to be removed from the object.

   -  An OPTIONAL &lt;contact:chg&gt; element that contains object attribute
      values to be changed.

   At least one &lt;contact:add&gt;, &lt;contact:rem&gt;, or &lt;contact:chg&gt; element
   MUST be provided.  The &lt;contact:add&gt; and &lt;contact:rem&gt; elements
   contain the following child elements:





<span class="grey">Hollenbeck                  Standards Track                    [Page 23]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-24" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


   -  One or more &lt;contact:status&gt; elements that contain status values
      to be associated with or removed from the object.  When specifying
      a value to be removed, only the attribute value is significant;
      element text is not required to match a value for removal.

   A &lt;contact:chg&gt; element contains the following OPTIONAL child
   elements.  At least one child element MUST be present:

   -  One or two &lt;contact:postalInfo&gt; elements that contain postal
      address information.  Two elements are provided so that address
      information can be provided in both internationalized and
      localized forms; a "type" attribute is used to identify the two
      forms.  If an internationalized form (type="int") is provided,
      element content MUST be represented in a subset of UTF-8 that can
      be represented in the 7-bit US-ASCII character set.  If a
      localized form (type="loc") is provided, element content MAY be
      represented in unrestricted UTF-8.  The &lt;contact:postalInfo&gt;
      element contains the following OPTIONAL child elements:

      -  A &lt;contact:name&gt; element that contains the name of the
         individual or role represented by the contact.

      -  A &lt;contact:org&gt; element that contains the name of the
         organization with which the contact is affiliated.

      -  A &lt;contact:addr&gt; element that contains address information
         associated with the contact.  A &lt;contact:addr&gt; element contains
         the following child elements:

         -  One, two, or three OPTIONAL &lt;contact:street&gt; elements that
            contain the contact's street address.

         -  A &lt;contact:city&gt; element that contains the contact's city.

         -  An OPTIONAL &lt;contact:sp&gt; element that contains the contact's
            state or province.

         -  An OPTIONAL &lt;contact:pc&gt; element that contains the contact's
            postal code.

         -  A &lt;contact:cc&gt; element that contains the contact's country
            code.

   -  A &lt;contact:voice&gt; element that contains the contact's voice
      telephone number.






<span class="grey">Hollenbeck                  Standards Track                    [Page 24]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-25" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


   -  A &lt;contact:fax&gt; element that contains the contact's facsimile
      telephone number.

   -  A &lt;contact:email&gt; element that contains the contact's email
      address.

   -  A &lt;contact:authInfo&gt; element that contains authorization
      information associated with the contact object.  This mapping
      includes a password-based authentication mechanism, but the schema
      allows new mechanisms to be defined in new schemas.

   -  A &lt;contact:disclose&gt; element that allows a client to identify
      elements that require exceptional server operator handling to
      allow or restrict disclosure to third parties.  See <a href="#section-2.9">section 2.9</a>.
      for a description of the child elements contained within the
      &lt;contact:disclose&gt; element.

   Example &lt;update&gt; command:

   C:&lt;?xml version="1.0" encoding="UTF-8" standalone="no"?&gt;
   C:&lt;epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
   C:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
   C:     xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0
   C:     epp-1.0.xsd"&gt;
   C:  &lt;command&gt;
   C:    &lt;update&gt;
   C:      &lt;contact:update
   C:       xmlns:contact="urn:ietf:params:xml:ns:contact-1.0"
   C:       xsi:schemaLocation="urn:ietf:params:xml:ns:contact-1.0
   C:       contact-1.0.xsd"&gt;
   C:        &lt;contact:id&gt;sh8013&lt;/contact:id&gt;
   C:        &lt;contact:add&gt;
   C:          &lt;contact:status s="clientDeleteProhibited"/&gt;
   C:        &lt;/contact:add&gt;
   C:        &lt;contact:chg&gt;
   C:          &lt;contact:postalInfo type="int"&gt;
   C:            &lt;contact:org/&gt;
   C:            &lt;contact:addr&gt;
   C:              &lt;contact:street&gt;124 Example Dr.&lt;/contact:street&gt;
   C:              &lt;contact:street&gt;Suite 200&lt;/contact:street&gt;
   C:              &lt;contact:city&gt;Dulles&lt;/contact:city&gt;
   C:              &lt;contact:sp&gt;VA&lt;/contact:sp&gt;
   C:              &lt;contact:pc&gt;20166-6503&lt;/contact:pc&gt;
   C:              &lt;contact:cc&gt;US&lt;/contact:cc&gt;
   C:            &lt;/contact:addr&gt;
   C:          &lt;/contact:postalInfo&gt;
   C:          &lt;contact:voice&gt;+1.7034444444&lt;/contact:voice&gt;
   C:          &lt;contact:fax/&gt;



<span class="grey">Hollenbeck                  Standards Track                    [Page 25]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-26" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


   C:          &lt;contact:authInfo&gt;
   C:            &lt;contact:pw&gt;2fooBAR&lt;/contact:pw&gt;
   C:          &lt;/contact:authInfo&gt;
   C:          &lt;contact:disclose flag="1"&gt;
   C:            &lt;contact:voice/&gt;
   C:            &lt;contact:email/&gt;
   C:          &lt;/contact:disclose&gt;
   C:        &lt;/contact:chg&gt;
   C:      &lt;/contact:update&gt;
   C:    &lt;/update&gt;
   C:    &lt;clTRID&gt;ABC-12345&lt;/clTRID&gt;
   C:  &lt;/command&gt;
   C:&lt;/epp&gt;

   When an &lt;update&gt; command has been processed successfully, a server
   MUST respond with an EPP response with no &lt;resData&gt; element.

   Example &lt;update&gt; response:

   S:&lt;?xml version="1.0" encoding="UTF-8" standalone="no"?&gt;
   S:&lt;epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
   S:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
   S:     xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0
   S:     epp-1.0.xsd"&gt;
   S:  &lt;response&gt;
   S:    &lt;result code="1000"&gt;
   S:      &lt;msg&gt;Command completed successfully&lt;/msg&gt;
   S:    &lt;/result&gt;
   S:    &lt;trID&gt;
   S:      &lt;clTRID&gt;ABC-12345&lt;/clTRID&gt;
   S:      &lt;svTRID&gt;54321-XYZ&lt;/svTRID&gt;
   S:    &lt;/trID&gt;
   S:  &lt;/response&gt;
   S:&lt;/epp&gt;

   An EPP error response MUST be returned if an &lt;update&gt; command can not
   be processed for any reason.

<span class="h4"><a class="selflink" id="section-3.2.6" href="#section-3.2.6">3.2.6</a>.  Offline Review of Requested Actions</span>

   Commands are processed by a server in the order they are received
   from a client.  Though an immediate response confirming receipt and
   processing of the command is produced by the server, a server
   operator MAY perform an offline review of requested transform
   commands before completing the requested action.  In such situations,
   the response from the server MUST clearly note that the transform
   command has been received and processed, but the requested action is
   pending.  The status of the corresponding object MUST clearly reflect



<span class="grey">Hollenbeck                  Standards Track                    [Page 26]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-27" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


   processing of the pending action.  The server MUST notify the client
   when offline processing of the action has been completed.

   Examples describing a &lt;create&gt; command that requires offline review
   are included here.  Note the result code and message returned in
   response to the &lt;create&gt; command.

   S:&lt;?xml version="1.0" encoding="UTF-8" standalone="no"?&gt;
   S:&lt;epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
   S:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
   S:     xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0
   S:     epp-1.0.xsd"&gt;
   S:  &lt;response&gt;
   S:    &lt;result code="1001"&gt;
   S:      &lt;msg&gt;Command completed successfully; action pending&lt;/msg&gt;
   S:    &lt;/result&gt;
   S:    &lt;resData&gt;
   S:      &lt;contact:creData
   S:       xmlns:contact="urn:ietf:params:xml:ns:contact-1.0"
   S:       xsi:schemaLocation="urn:ietf:params:xml:ns:contact-1.0
   S:       contact-1.0.xsd"&gt;
   S:        &lt;contact:id&gt;sh8013&lt;/contact:id&gt;
   S:        &lt;contact:crDate&gt;1999-04-03T22:00:00.0Z&lt;/contact:crDate&gt;
   S:      &lt;/contact:creData&gt;
   S:    &lt;/resData&gt;
   S:    &lt;trID&gt;
   S:      &lt;clTRID&gt;ABC-12345&lt;/clTRID&gt;
   S:      &lt;svTRID&gt;54321-XYZ&lt;/svTRID&gt;
   S:    &lt;/trID&gt;
   S:  &lt;/response&gt;
   S:&lt;/epp&gt;

   The status of the contact object after returning this response MUST
   include "pendingCreate".  The server operator reviews the request
   offline, and informs the client of the outcome of the review by
   queuing a service message for retrieval via the &lt;poll&gt; command.

   The service message MUST contain text in the &lt;response&gt;, &lt;msgQ&gt;,
   &lt;msg&gt; element that describes the notification.  In addition, the EPP
   &lt;resData&gt; element MUST contain a child &lt;contact:panData&gt; element that
   identifies the contact namespace and the location of the contact
   schema.  The &lt;contact:panData&gt; element contains the following child
   elements:

   -  A &lt;contact:id&gt; element that contains the server-unique identifier
      of the contact object.  The &lt;contact:id&gt; element contains a
      REQUIRED "paResult" attribute.  A positive boolean value indicates
      that the request has been approved and completed.  A negative



<span class="grey">Hollenbeck                  Standards Track                    [Page 27]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-28" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


      boolean value indicates that the request has been denied and the
      requested action has not been taken.

   -  A &lt;contact:paTRID&gt; element that contains the client transaction
      identifier and server transaction identifier returned with the
      original response to process the command.  The client transaction
      identifier is OPTIONAL and will only be returned if the client
      provided an identifier with the original &lt;create&gt; command.

   -  A &lt;contact:paDate&gt; element that contains the date and time
      describing when review of the requested action was completed.

   Example "review completed" service message:

   S:&lt;?xml version="1.0" encoding="UTF-8" standalone="no"?&gt;
   S:&lt;epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
   S:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
   S:     xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0
   S:     epp-1.0.xsd"&gt;
   S:  &lt;response&gt;
   S:    &lt;result code="1301"&gt;
   S:      &lt;msg&gt;Command completed successfully; ack to dequeue&lt;/msg&gt;
   S:    &lt;/result&gt;
   S:    &lt;msgQ count="5" id="12345"&gt;
   S:      &lt;qDate&gt;1999-04-04T22:01:00.0Z&lt;/qDate&gt;
   S:      &lt;msg&gt;Pending action completed successfully.&lt;/msg&gt;
   S:    &lt;/msgQ&gt;
   S:    &lt;resData&gt;
   S:      &lt;contact:panData
   S:       xmlns:contact="urn:ietf:params:xml:ns:contact-1.0"
   S:       xsi:schemaLocation="urn:ietf:params:xml:ns:contact-1.0
   S:       contact-1.0.xsd"&gt;
   S:        &lt;contact:id paResult="1"&gt;sh8013&lt;/contact:id&gt;
   S:        &lt;contact:paTRID&gt;
   S:          &lt;clTRID&gt;ABC-12345&lt;/clTRID&gt;
   S:          &lt;svTRID&gt;54321-XYZ&lt;/svTRID&gt;
   S:        &lt;/contact:paTRID&gt;
   S:        &lt;contact:paDate&gt;1999-04-04T22:00:00.0Z&lt;/contact:paDate&gt;
   S:      &lt;/contact:panData&gt;
   S:    &lt;/resData&gt;
   S:    &lt;trID&gt;
   S:      &lt;clTRID&gt;BCD-23456&lt;/clTRID&gt;
   S:      &lt;svTRID&gt;65432-WXY&lt;/svTRID&gt;
   S:    &lt;/trID&gt;
   S:  &lt;/response&gt;
   S:&lt;/epp&gt;





<span class="grey">Hollenbeck                  Standards Track                    [Page 28]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-29" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


<span class="h2"><a class="selflink" id="section-4" href="#section-4">4</a>.  Formal Syntax</span>

   An EPP object mapping is specified in XML Schema notation.  The
   formal syntax presented here is a complete schema representation of
   the object mapping suitable for automated validation of EPP XML
   instances.  The BEGIN and END tags are not part of the schema; they
   are used to note the beginning and ending of the schema for URI
   registration purposes.

   BEGIN
   &lt;?xml version="1.0" encoding="UTF-8"?&gt;

   &lt;schema targetNamespace="urn:ietf:params:xml:ns:contact-1.0"
           xmlns:contact="urn:ietf:params:xml:ns:contact-1.0"
           xmlns:epp="urn:ietf:params:xml:ns:epp-1.0"
           xmlns:eppcom="urn:ietf:params:xml:ns:eppcom-1.0"
           xmlns="http://www.w3.org/2001/XMLSchema"
           elementFormDefault="qualified"&gt;

   &lt;!--
   Import common element types.
   --&gt;
     &lt;import namespace="urn:ietf:params:xml:ns:eppcom-1.0"
             schemaLocation="eppcom-1.0.xsd"/&gt;
     &lt;import namespace="urn:ietf:params:xml:ns:epp-1.0"
             schemaLocation="epp-1.0.xsd"/&gt;

     &lt;annotation&gt;
       &lt;documentation&gt;
         Extensible Provisioning Protocol v1.0
         contact provisioning schema.
       &lt;/documentation&gt;
     &lt;/annotation&gt;

   &lt;!--
   Child elements found in EPP commands.
   --&gt;
     &lt;element name="check" type="contact:mIDType"/&gt;
     &lt;element name="create" type="contact:createType"/&gt;
     &lt;element name="delete" type="contact:sIDType"/&gt;
     &lt;element name="info" type="contact:authIDType"/&gt;
     &lt;element name="transfer" type="contact:authIDType"/&gt;
     &lt;element name="update" type="contact:updateType"/&gt;

   &lt;!--
   Utility types.
   --&gt;
     &lt;simpleType name="ccType"&gt;



<span class="grey">Hollenbeck                  Standards Track                    [Page 29]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-30" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


       &lt;restriction base="token"&gt;
         &lt;length value="2"/&gt;
       &lt;/restriction&gt;
     &lt;/simpleType&gt;

     &lt;complexType name="e164Type"&gt;
       &lt;simpleContent&gt;
         &lt;extension base="contact:e164StringType"&gt;
           &lt;attribute name="x" type="token"/&gt;
         &lt;/extension&gt;
       &lt;/simpleContent&gt;
     &lt;/complexType&gt;

     &lt;simpleType name="e164StringType"&gt;
       &lt;restriction base="token"&gt;
         &lt;pattern value="(\+[0-9]{1,3}\.[0-9]{1,14})?"/&gt;
         &lt;maxLength value="17"/&gt;
       &lt;/restriction&gt;
     &lt;/simpleType&gt;

     &lt;simpleType name="pcType"&gt;
       &lt;restriction base="token"&gt;
         &lt;maxLength value="16"/&gt;
       &lt;/restriction&gt;
     &lt;/simpleType&gt;

     &lt;simpleType name="postalLineType"&gt;
        &lt;restriction base="normalizedString"&gt;
          &lt;minLength value="1"/&gt;
          &lt;maxLength value="255"/&gt;
        &lt;/restriction&gt;
     &lt;/simpleType&gt;

     &lt;simpleType name="optPostalLineType"&gt;
        &lt;restriction base="normalizedString"&gt;
          &lt;maxLength value="255"/&gt;
        &lt;/restriction&gt;
     &lt;/simpleType&gt;

   &lt;!--
   Child elements of the &lt;create&gt; command.
   --&gt;
     &lt;complexType name="createType"&gt;
       &lt;sequence&gt;
         &lt;element name="id" type="eppcom:clIDType"/&gt;
         &lt;element name="postalInfo" type="contact:postalInfoType"
          maxOccurs="2"/&gt;
         &lt;element name="voice" type="contact:e164Type"



<span class="grey">Hollenbeck                  Standards Track                    [Page 30]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-31" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


          minOccurs="0"/&gt;
         &lt;element name="fax" type="contact:e164Type"
          minOccurs="0"/&gt;
         &lt;element name="email" type="eppcom:minTokenType"/&gt;
         &lt;element name="authInfo" type="contact:authInfoType"/&gt;
         &lt;element name="disclose" type="contact:discloseType"
          minOccurs="0"/&gt;
       &lt;/sequence&gt;
     &lt;/complexType&gt;

     &lt;complexType name="postalInfoType"&gt;
       &lt;sequence&gt;
         &lt;element name="name" type="contact:postalLineType"/&gt;
         &lt;element name="org" type="contact:optPostalLineType"
          minOccurs="0"/&gt;
         &lt;element name="addr" type="contact:addrType"/&gt;
       &lt;/sequence&gt;
       &lt;attribute name="type" type="contact:postalInfoEnumType"
        use="required"/&gt;
     &lt;/complexType&gt;

     &lt;simpleType name="postalInfoEnumType"&gt;
       &lt;restriction base="token"&gt;
         &lt;enumeration value="loc"/&gt;
         &lt;enumeration value="int"/&gt;
       &lt;/restriction&gt;
     &lt;/simpleType&gt;

     &lt;complexType name="addrType"&gt;
       &lt;sequence&gt;
         &lt;element name="street" type="contact:optPostalLineType"
          minOccurs="0" maxOccurs="3"/&gt;
         &lt;element name="city" type="contact:postalLineType"/&gt;
         &lt;element name="sp" type="contact:optPostalLineType"
          minOccurs="0"/&gt;
         &lt;element name="pc" type="contact:pcType"
          minOccurs="0"/&gt;
         &lt;element name="cc" type="contact:ccType"/&gt;
       &lt;/sequence&gt;
     &lt;/complexType&gt;

     &lt;complexType name="authInfoType"&gt;
       &lt;choice&gt;
         &lt;element name="pw" type="eppcom:pwAuthInfoType"/&gt;
         &lt;element name="ext" type="eppcom:extAuthInfoType"/&gt;
       &lt;/choice&gt;
     &lt;/complexType&gt;




<span class="grey">Hollenbeck                  Standards Track                    [Page 31]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-32" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


     &lt;complexType name="discloseType"&gt;
       &lt;sequence&gt;
         &lt;element name="name" type="contact:intLocType"
          minOccurs="0" maxOccurs="2"/&gt;
         &lt;element name="org" type="contact:intLocType"
          minOccurs="0" maxOccurs="2"/&gt;
         &lt;element name="addr" type="contact:intLocType"
          minOccurs="0" maxOccurs="2"/&gt;
         &lt;element name="voice" minOccurs="0"/&gt;
         &lt;element name="fax" minOccurs="0"/&gt;
         &lt;element name="email" minOccurs="0"/&gt;
       &lt;/sequence&gt;
       &lt;attribute name="flag" type="boolean" use="required"/&gt;
     &lt;/complexType&gt;

     &lt;complexType name="intLocType"&gt;
       &lt;attribute name="type" type="contact:postalInfoEnumType"
        use="required"/&gt;
     &lt;/complexType&gt;

   &lt;!--
   Child element of commands that require only an identifier.
   --&gt;
     &lt;complexType name="sIDType"&gt;
       &lt;sequence&gt;
         &lt;element name="id" type="eppcom:clIDType"/&gt;
       &lt;/sequence&gt;
     &lt;/complexType&gt;

   &lt;!--
   Child element of commands that accept multiple identifiers.
   --&gt;
     &lt;complexType name="mIDType"&gt;
       &lt;sequence&gt;
         &lt;element name="id" type="eppcom:clIDType"
          maxOccurs="unbounded"/&gt;
       &lt;/sequence&gt;
     &lt;/complexType&gt;

   &lt;!--
   Child elements of the &lt;info&gt; and &lt;transfer&gt; commands.
   --&gt;
     &lt;complexType name="authIDType"&gt;
       &lt;sequence&gt;
         &lt;element name="id" type="eppcom:clIDType"/&gt;
         &lt;element name="authInfo" type="contact:authInfoType"
          minOccurs="0"/&gt;
       &lt;/sequence&gt;



<span class="grey">Hollenbeck                  Standards Track                    [Page 32]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-33" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


     &lt;/complexType&gt;

   &lt;!--
   Child elements of the &lt;update&gt; command.
   --&gt;
     &lt;complexType name="updateType"&gt;
       &lt;sequence&gt;
         &lt;element name="id" type="eppcom:clIDType"/&gt;
         &lt;element name="add" type="contact:addRemType"
          minOccurs="0"/&gt;
         &lt;element name="rem" type="contact:addRemType"
          minOccurs="0"/&gt;
         &lt;element name="chg" type="contact:chgType"
          minOccurs="0"/&gt;
       &lt;/sequence&gt;
     &lt;/complexType&gt;

   &lt;!--
   Data elements that can be added or removed.
   --&gt;
     &lt;complexType name="addRemType"&gt;
       &lt;sequence&gt;
         &lt;element name="status" type="contact:statusType"
          maxOccurs="7"/&gt;
       &lt;/sequence&gt;
     &lt;/complexType&gt;

   &lt;!--
   Data elements that can be changed.
   --&gt;
     &lt;complexType name="chgType"&gt;
       &lt;sequence&gt;
         &lt;element name="postalInfo" type="contact:chgPostalInfoType"
          minOccurs="0" maxOccurs="2"/&gt;
         &lt;element name="voice" type="contact:e164Type"
          minOccurs="0"/&gt;
         &lt;element name="fax" type="contact:e164Type"
          minOccurs="0"/&gt;
         &lt;element name="email" type="eppcom:minTokenType"
          minOccurs="0"/&gt;
         &lt;element name="authInfo" type="contact:authInfoType"
          minOccurs="0"/&gt;
         &lt;element name="disclose" type="contact:discloseType"
          minOccurs="0"/&gt;
       &lt;/sequence&gt;
     &lt;/complexType&gt;

     &lt;complexType name="chgPostalInfoType"&gt;



<span class="grey">Hollenbeck                  Standards Track                    [Page 33]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-34" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


       &lt;sequence&gt;
         &lt;element name="name" type="contact:postalLineType"
          minOccurs="0"/&gt;
         &lt;element name="org" type="contact:optPostalLineType"
          minOccurs="0"/&gt;
         &lt;element name="addr" type="contact:addrType"
          minOccurs="0"/&gt;
       &lt;/sequence&gt;
       &lt;attribute name="type" type="contact:postalInfoEnumType"
        use="required"/&gt;
     &lt;/complexType&gt;

   &lt;!--
   Child response elements.
   --&gt;
     &lt;element name="chkData" type="contact:chkDataType"/&gt;
     &lt;element name="creData" type="contact:creDataType"/&gt;
     &lt;element name="infData" type="contact:infDataType"/&gt;
     &lt;element name="panData" type="contact:panDataType"/&gt;
     &lt;element name="trnData" type="contact:trnDataType"/&gt;

   &lt;!--
   &lt;check&gt; response elements.
   --&gt;
     &lt;complexType name="chkDataType"&gt;
       &lt;sequence&gt;
         &lt;element name="cd" type="contact:checkType"
          maxOccurs="unbounded"/&gt;
       &lt;/sequence&gt;
     &lt;/complexType&gt;

     &lt;complexType name="checkType"&gt;
       &lt;sequence&gt;
         &lt;element name="id" type="contact:checkIDType"/&gt;
         &lt;element name="reason" type="eppcom:reasonType"
          minOccurs="0"/&gt;
       &lt;/sequence&gt;
     &lt;/complexType&gt;

     &lt;complexType name="checkIDType"&gt;
       &lt;simpleContent&gt;
         &lt;extension base="eppcom:clIDType"&gt;
           &lt;attribute name="avail" type="boolean"
            use="required"/&gt;
         &lt;/extension&gt;
       &lt;/simpleContent&gt;
     &lt;/complexType&gt;




<span class="grey">Hollenbeck                  Standards Track                    [Page 34]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-35" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


   &lt;!--
   &lt;create&gt; response elements.
   --&gt;
     &lt;complexType name="creDataType"&gt;
       &lt;sequence&gt;
         &lt;element name="id" type="eppcom:clIDType"/&gt;
         &lt;element name="crDate" type="dateTime"/&gt;
       &lt;/sequence&gt;
     &lt;/complexType&gt;

   &lt;!--
   &lt;info&gt; response elements.
   --&gt;
     &lt;complexType name="infDataType"&gt;
       &lt;sequence&gt;
         &lt;element name="id" type="eppcom:clIDType"/&gt;
         &lt;element name="roid" type="eppcom:roidType"/&gt;
         &lt;element name="status" type="contact:statusType"
          maxOccurs="7"/&gt;
         &lt;element name="postalInfo" type="contact:postalInfoType"
          maxOccurs="2"/&gt;
         &lt;element name="voice" type="contact:e164Type"
          minOccurs="0"/&gt;
         &lt;element name="fax" type="contact:e164Type"
          minOccurs="0"/&gt;
         &lt;element name="email" type="eppcom:minTokenType"/&gt;
         &lt;element name="clID" type="eppcom:clIDType"/&gt;
         &lt;element name="crID" type="eppcom:clIDType"/&gt;
         &lt;element name="crDate" type="dateTime"/&gt;
         &lt;element name="upID" type="eppcom:clIDType"
          minOccurs="0"/&gt;
         &lt;element name="upDate" type="dateTime"
          minOccurs="0"/&gt;
         &lt;element name="trDate" type="dateTime"
          minOccurs="0"/&gt;
         &lt;element name="authInfo" type="contact:authInfoType"
          minOccurs="0"/&gt;
         &lt;element name="disclose" type="contact:discloseType"
          minOccurs="0"/&gt;
       &lt;/sequence&gt;
     &lt;/complexType&gt;

   &lt;!--
   Status is a combination of attributes and an optional human-readable
   message that may be expressed in languages other than English.
   --&gt;
     &lt;complexType name="statusType"&gt;
       &lt;simpleContent&gt;



<span class="grey">Hollenbeck                  Standards Track                    [Page 35]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-36" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


         &lt;extension base="normalizedString"&gt;
           &lt;attribute name="s" type="contact:statusValueType"
            use="required"/&gt;
           &lt;attribute name="lang" type="language"
            default="en"/&gt;
         &lt;/extension&gt;
       &lt;/simpleContent&gt;
     &lt;/complexType&gt;

     &lt;simpleType name="statusValueType"&gt;
       &lt;restriction base="token"&gt;
         &lt;enumeration value="clientDeleteProhibited"/&gt;
         &lt;enumeration value="clientTransferProhibited"/&gt;
         &lt;enumeration value="clientUpdateProhibited"/&gt;
         &lt;enumeration value="linked"/&gt;
         &lt;enumeration value="ok"/&gt;
         &lt;enumeration value="pendingCreate"/&gt;
         &lt;enumeration value="pendingDelete"/&gt;
         &lt;enumeration value="pendingTransfer"/&gt;
         &lt;enumeration value="pendingUpdate"/&gt;
         &lt;enumeration value="serverDeleteProhibited"/&gt;
         &lt;enumeration value="serverTransferProhibited"/&gt;
         &lt;enumeration value="serverUpdateProhibited"/&gt;
       &lt;/restriction&gt;
     &lt;/simpleType&gt;

   &lt;!--
   Pending action notification response elements.
   --&gt;
     &lt;complexType name="panDataType"&gt;
       &lt;sequence&gt;
         &lt;element name="id" type="contact:paCLIDType"/&gt;
         &lt;element name="paTRID" type="epp:trIDType"/&gt;
         &lt;element name="paDate" type="dateTime"/&gt;
       &lt;/sequence&gt;
     &lt;/complexType&gt;

     &lt;complexType name="paCLIDType"&gt;
       &lt;simpleContent&gt;
         &lt;extension base="eppcom:clIDType"&gt;
           &lt;attribute name="paResult" type="boolean"
            use="required"/&gt;
         &lt;/extension&gt;
       &lt;/simpleContent&gt;
     &lt;/complexType&gt;

   &lt;!--
   &lt;transfer&gt; response elements.



<span class="grey">Hollenbeck                  Standards Track                    [Page 36]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-37" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


   --&gt;
     &lt;complexType name="trnDataType"&gt;
       &lt;sequence&gt;
         &lt;element name="id" type="eppcom:clIDType"/&gt;
         &lt;element name="trStatus" type="eppcom:trStatusType"/&gt;
         &lt;element name="reID" type="eppcom:clIDType"/&gt;
         &lt;element name="reDate" type="dateTime"/&gt;
         &lt;element name="acID" type="eppcom:clIDType"/&gt;
         &lt;element name="acDate" type="dateTime"/&gt;
       &lt;/sequence&gt;
     &lt;/complexType&gt;

   &lt;!--
   End of schema.
   --&gt;
   &lt;/schema&gt;
   END

<span class="h2"><a class="selflink" id="section-5" href="#section-5">5</a>.  Internationalization Considerations</span>

   EPP is represented in XML, which provides native support for encoding
   information using the Unicode character set and its more compact
   representations, including UTF-8.  Conformant XML processors
   recognize both UTF-8 and UTF-16 [<a href="./rfc2781" title="&quot;UTF-16, an encoding of ISO 10646&quot;">RFC2781</a>].  Though XML includes
   provisions to identify and use other character encodings through use
   of an "encoding" attribute in an &lt;?xml?&gt; declaration, use of UTF-8 is
   RECOMMENDED in environments where parser encoding support
   incompatibility exists.

   All date-time values presented via EPP MUST be expressed in Universal
   Coordinated Time using the Gregorian calendar.  The XML Schema allows
   use of time zone identifiers to indicate offsets from the zero
   meridian, but this option MUST NOT be used with EPP.  The extended
   date-time form using upper case "T" and "Z" characters defined in
   [<a href="./rfc3339" title="&quot;Date and Time on the Internet: Timestamps&quot;">RFC3339</a>] MUST be used to represent date-time values as the XML
   Schema does not support truncated date-time forms or lower case "T"
   and "Z" characters.

   Humans, organizations, and other entities often need to represent
   social information in both a commonly understood character set and a
   locally optimized character set.  This specification provides
   features allowing representation of social information in both a
   subset of UTF-8 for broad readability and unrestricted UTF-8 for
   local optimization.







<span class="grey">Hollenbeck                  Standards Track                    [Page 37]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-38" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


<span class="h2"><a class="selflink" id="section-6" href="#section-6">6</a>.  IANA Considerations</span>

   This document uses URNs to describe XML namespaces and XML schemas
   conforming to a registry mechanism described in [<a href="./rfc3688" title="&quot;The IETF XML Registry&quot;">RFC3688</a>].  Two URI
   assignments have been registered by the IANA.

   Registration request for the contact namespace:

   URI: urn:ietf:params:xml:ns:contact-1.0

   Registrant Contact: See the "Author's Address" section of this
   document.

   XML: None.  Namespace URIs do not represent an XML specification.

   Registration request for the contact XML schema:

   URI: urn:ietf:params:xml:schema:contact-1.0

   Registrant Contact: See the "Author's Address" section of this
   document.

   XML: See the "Formal Syntax" section of this document.

<span class="h2"><a class="selflink" id="section-7" href="#section-7">7</a>.  Security Considerations</span>

   Authorization information as described in <a href="#section-2.8">section 2.8</a>. is REQUIRED to
   create a contact object.  This information is used in some query and
   transfer operations as an additional means of determining client
   authorization to perform the command.  Failure to protect
   authorization information from inadvertent disclosure can result in
   unauthorized transfer operations and unauthorized information
   release.  Both client and server MUST ensure that authorization
   information is stored and exchanged with high-grade encryption
   mechanisms to provide privacy services.

   The object mapping described in this document does not provide any
   other security services or introduce any additional considerations
   beyond those described by [<a href="./rfc3730" title="&quot;Extensible Provisioning Protocol (EPP)&quot;">RFC3730</a>] and protocol layers used by EPP.

<span class="h2"><a class="selflink" id="section-8" href="#section-8">8</a>.  Acknowledgements</span>

   This document was originally written as an individual submission
   Internet-Draft.  The provreg working group later adopted it as a
   working group document and provided many invaluable comments and
   suggested improvements.  The author wishes to acknowledge the efforts
   of WG chairs Edward Lewis and Jaap Akkerhuis for their process and
   editorial contributions.



<span class="grey">Hollenbeck                  Standards Track                    [Page 38]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-39" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


   Specific suggestions that have been incorporated into this document
   were provided by Chris Bason, Eric Brunner-Williams, Jordyn Buchanan,
   Robert Burbidge, Dave Crocker, Ayesha Damaraju, Anthony Eden, Sheer
   El-Showk, Dipankar Ghosh, Klaus Malorny, Dan Manley, Michael
   Mealling, Patrick Mevzek, Asbjorn Steira, and Rick Wesson.

<span class="h2"><a class="selflink" id="section-9" href="#section-9">9</a>.  References</span>

<span class="h3"><a class="selflink" id="section-9.1" href="#section-9.1">9.1</a>.  Normative References</span>

   [<a id="ref-ISO3166">ISO3166</a>]  ISO 3166-1: "Codes for the representation of names of
              countries and their subdivisions - Part 1: Country codes",
              October 1997.

   [<a id="ref-RFC2119">RFC2119</a>]  Bradner, S., "Key Words for Use in RFCs to Indicate
              Requirement Levels", <a href="https://www.rfc-editor.org/bcp/bcp14">BCP 14</a>, <a href="./rfc2119">RFC 2119</a>, March 1997.

   [<a id="ref-RFC2279">RFC2279</a>]  Yergeau, F., "UTF-8, a transformation format of ISO
              10646", <a href="./rfc2279">RFC 2279</a>, January 1998.

   [<a id="ref-RFC2822">RFC2822</a>]  Resnick, P., "Internet Message Format", <a href="./rfc2822">RFC 2822</a>, April
              2001.

   [<a id="ref-RFC3339">RFC3339</a>]  Klyne, G. and C. Newman: "Date and Time on the Internet:
              Timestamps", <a href="./rfc3339">RFC 3339</a>, July 2002.

   [<a id="ref-RFC3688">RFC3688</a>]  Mealling, M., "The IETF XML Registry", <a href="https://www.rfc-editor.org/bcp/bcp81">BCP 81</a>, <a href="./rfc3688">RFC 3688</a>,
              January 2004.

   [<a id="ref-RFC3730">RFC3730</a>]  Hollenbeck, S., "Extensible Provisioning Protocol (EPP)",
              <a href="./rfc3730">RFC 3730</a>, March 2004.

   [<a id="ref-XML">XML</a>]      Editor T. Bray et al.: "Extensible Markup Language (XML)
              1.0 (Second Edition)", W3C Recommendation 6 October 2000.

   [<a id="ref-XMLS-1">XMLS-1</a>]   Editors H. Thompson et al.: "XML Schema Part 1:
              Structures", W3C Recommendation 2 May 2001.

   [<a id="ref-XMLS-2">XMLS-2</a>]   Editors P. Biron, A. Malhotra: "XML Schema Part 2:
              Datatypes", W3C Recommendation 2 May 2001.

<span class="h3"><a class="selflink" id="section-9.2" href="#section-9.2">9.2</a>.  Informative References</span>

   [<a id="ref-RFC2781">RFC2781</a>]  Hoffman, P. and F. Yergeau, "UTF-16, an encoding of ISO
              10646", <a href="./rfc2781">RFC 2781</a>, February 2000.

   [<a id="ref-E164a">E164a</a>]    ITU-T Recommendation E.164: "The International Public
              Telecommunication Numbering Plan", May 1997.



<span class="grey">Hollenbeck                  Standards Track                    [Page 39]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-40" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


   [<a id="ref-E164b">E164b</a>]    Complement To ITU-T Recommendation E.164 (05/1997): "List
              of ITU-T Recommendation E.164 assigned country codes",
              June 2000.

<span class="h2"><a class="selflink" id="section-10" href="#section-10">10</a>.  Author's Address</span>

   Scott Hollenbeck
   VeriSign Global Registry Services
   21345 Ridgetop Circle
   Dulles, VA 20166-6503
   USA

   EMail: shollenbeck@verisign.com






































<span class="grey">Hollenbeck                  Standards Track                    [Page 40]</span></pre>
<hr class='noprint'/><!--NewPage--><pre class='newpage'><span id="page-41" ></span>
<span class="grey"><a href="./rfc3733">RFC 3733</a>                  EPP Contact Mapping                 March 2004</span>


<span class="h2"><a class="selflink" id="section-11" href="#section-11">11</a>.  Full Copyright Statement</span>

   Copyright (C) The Internet Society (2004).  This document is subject
   to the rights, licenses and restrictions contained in <a href="https://www.rfc-editor.org/bcp/bcp78">BCP 78</a> and
   except as set forth therein, the authors retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in <a href="https://www.rfc-editor.org/bcp/bcp78">BCP 78</a> and <a href="https://www.rfc-editor.org/bcp/bcp79">BCP 79</a>.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   <a href="http://www.ietf.org/ipr">http://www.ietf.org/ipr</a>.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at ietf-
   ipr@ietf.org.

Acknowledgement

   Funding for the RFC Editor function is currently provided by the
   Internet Society.









Hollenbeck                  Standards Track                    [Page 41]
</pre>