dolfin (2016.2.0-2) unstable; urgency=medium

  * Dolfin depends on specific 3.7.X patch releases of PETSc and SLEPc
    (see dolfin.pc, DOLFINConfig.cmake)

 -- Drew Parsons <dparsons@debian.org>  Tue, 24 Jan 2017 06:18:32 +0800

dolfin (2016.2.0-1) unstable; urgency=medium

  [ Drew Parsons ]
  * Drop HDF5 Fortran configuration (it's not actually used).
  * Tighten build and python-dolfin fenics dependencies to the
    FENiCS minor version: (>= 2016.2.0), (<< 2016.3~)

  [ Johannes Ring ]
  * New upstream release.
  * d/watch: Check pgp signature.
  * d/control:
    - Update package names (libdolfin2016.1 -> libdolfin2016.2
      and libdolfin2016.1-dbg -> libdolfin2016.2-dbg).
    - Bump minimum required version for python-instant, python-ufl and
      python-ffc to 2016.2.
    - Add python-dijitso to Build-Depends and Depends for binary package
      python-dolfin.

 -- Drew Parsons <dparsons@debian.org>  Wed, 21 Dec 2016 16:47:36 +0800

dolfin (2016.1.0-5) unstable; urgency=medium

  * Reenable HDF5 support.
  * patches/HDF5-configure.patch helps configure HDF5 parallel.

 -- Drew Parsons <dparsons@debian.org>  Fri, 16 Sep 2016 11:16:05 +0800

dolfin (2016.1.0-4) unstable; urgency=medium

  * Disable HDF5 support.  
    HDF5 was never actually enabled previously due to a discrepant
    configuration between serial and parallel HDF5, but that now
    causes dolfin to fail to build.

 -- Drew Parsons <dparsons@debian.org>  Wed, 14 Sep 2016 12:52:59 +0800

dolfin (2016.1.0-3) unstable; urgency=medium

  * Thanks Christophe Prud'homme for your uploads of the earlier
    versions of dolfin.  Removing from the Uploaders list now.
    Closes: #835003.
  * enable parallel build (dh $@ --parallel). Closes: #833602.

 -- Drew Parsons <dparsons@debian.org>  Mon, 12 Sep 2016 17:19:42 +0800

dolfin (2016.1.0-2) unstable; urgency=medium

  * Enable build against version of PETSc (and SLEPc) provided by
    petsc-dev, e.g. PETSc 3.6 or 3.7.
  * Include support for petsc4py and slepc4py.
  * Update debian/watch (uscan).

 -- Drew Parsons <dparsons@debian.org>  Thu, 11 Aug 2016 23:08:05 +0800

dolfin (2016.1.0-1) unstable; urgency=medium

  [ Johannes Ring ]
  * New upstream release.
  * debian/control:
    - Update package names for new SONAME 2016.1 (libdolfin1.6 ->
      libdolfin2016.1 and libdolfin1.6-dbg -> libdolfin2016.1-dbg).
    - Bump minimum required version for python-instant, python-ufl and
      python-ffc to 2016.1.
  * Move debian/libdolfin1.6.install -> debian/libdolfin2016.1.install.
  * debian/rules: Add -fpermissive to CXX flags.

 -- Drew Parsons <dparsons@debian.org>  Tue, 05 Jul 2016 13:14:01 +0800

dolfin (1.6.0-5) unstable; urgency=medium

  * Depends: libpetsc3.6-dev rather than petsc-dev.
    Likewise libslepc3.6-dev.
    dolfin 1.6 is not compatible with petsc 3.7.

 -- Drew Parsons <dparsons@debian.org>  Tue, 07 Jun 2016 09:11:42 +0800

dolfin (1.6.0-4) unstable; urgency=medium

  [ Mattia Rizzolo ]
  * debian/control:
    + Update VCS fields after the move to Git.

  [ Drew Parsons ]
  * Remove python-dolfin dependency on python-netcdf. Closes: #821215.
  * Build against vtk6 not vtk5 (source and libdolfin-dev dependencies).
    Requires Qt4 support to be switched off (vtk6 uses Qt5).
    Qt support has been dropped upstream. Closes: #821875. 
  * Activate support for SCOTCH.
  * Standards-Version: 3.9.8

 -- Drew Parsons <dparsons@debian.org>  Tue, 26 Apr 2016 23:59:41 +0800

dolfin (1.6.0-3) unstable; urgency=medium

  * Team upload.
  * Use OPENMPI_ARCHITECTURES from mpi-default-dev instead of hardcoding
    architectures where not to use openmpi.

 -- Mattia Rizzolo <mattia@debian.org>  Thu, 21 Apr 2016 15:33:43 +0000

dolfin (1.6.0-2) unstable; urgency=medium

  * Team upload.
  * Run wrap-and-sort -s
  * Switch to unversioned Build-Depends on petsc-dev and slepc-dev (also for
    the libdolfin-dev dependencies).

 -- Mattia Rizzolo <mattia@debian.org>  Thu, 21 Apr 2016 13:32:44 +0000

dolfin (1.6.0-1) unstable; urgency=medium

  * New upstream release.
  * debian/control:
    - Add gfortran to build dependencies.
    - Update package names for new SONAME 1.6 (libdolfin1.5 ->
      libdolfin1.6 and libdolfin1.5-dbg -> libdolfin1.6-dbg).
    - Bump minimum required version for python-instant, python-ufl and
      python-ffc to 1.6.0.
    - Require swig3.0 (>= 3.0.3) in Build-Depends.
  * Move debian/libdolfin1.5.install -> debian/libdolfin1.6.install.
  * Remove patch for fixing problem with Python 2.7.10 (fixed upstream).
  * debian/rules:
    - Replace swig with swig3.0.
    - Set PETSC_DIR to /usr/lib/petsc and SLEPC_DIR to /usr/lib/slepc.
    - Explicitly disable petsc4py, slepc4py and sphinx.
    - Help CMake find the parallel version of hdf5.

 -- Johannes Ring <johannr@simula.no>  Sat, 31 Oct 2015 13:30:16 +0800

dolfin (1.5.0-4) unstable; urgency=medium

  * debian/control: Enable libpetsc3.2-dev and libslepc3.2-dev on
    armel, arm64 and hurd-i386 (closes: #787494).
  * debian/rules: Enable MPI on armel.

 -- Johannes Ring <johannr@simula.no>  Tue, 02 Jun 2015 12:39:45 +0200

dolfin (1.5.0-3) unstable; urgency=medium

  * Add patch to fix issue with Python 2.7.10 (closes: #786857).

 -- Johannes Ring <johannr@simula.no>  Mon, 01 Jun 2015 09:26:07 +0200

dolfin (1.5.0-2) unstable; urgency=medium

  * Upload to unstable (closes: #780359).

 -- Johannes Ring <johannr@simula.no>  Wed, 13 May 2015 09:48:59 +0200

dolfin (1.5.0-1) experimental; urgency=medium

  * New upstream release (closes: #780359).
  * debian/control:
    - Bump Standards-Version to 3.9.6 (no changes needed).
    - Bump X-Python-Version to >= 2.7.
    - Update package names for new SONAME 1.5 (libdolfin1.4 ->
      libdolfin1.5, libdolfin1.4-dbg -> libdolfin1.5-dbg and
      libdolfin1.4-dev -> libdolfin1.5-dev).
    - Bump minimum required version for python-instant, python-ufl and
      python-ffc to 1.5.0.
    - Add python-sympy and python-six to Depends for binary package
      python-dolfin.
    - Add dh-python to Build-Depends.
    - Remove libcgal-dev from {Build-}Depends.
  * Remove CSGCGALMeshGenerator3D-oom.patch since CGAL is no longer used
    by DOLFIN.
  * Move debian/libdolfin1.4.install -> debian/libdolfin1.5.install.
  * debian/rules: No longer any non DFSG-free stuff to remove, so update
    get-orig-source target (update debian/watch accordingly).
  * Update debian/copyright and debian/copyright_hints.

 -- Johannes Ring <johannr@simula.no>  Tue, 17 Mar 2015 07:57:11 +0100

dolfin (1.4.0+dfsg-4) unstable; urgency=medium

  * debian/control: Disable libcgal-dev on i386, mipsel and sparc.
  * debian/rules: Remove bad directives in pkg-config file dolfin.pc
    (closes: #760658).
  * Remove debian/libdolfin-dev.lintian-overrides.

 -- Johannes Ring <johannr@simula.no>  Mon, 22 Sep 2014 14:35:34 +0200

dolfin (1.4.0+dfsg-3) unstable; urgency=medium

  * debian/rules: Enable MPI on mips(el) and sparc (closes: #759182).
  * debian/control:
    - Disable libcgal-dev on {hurd, kfreebsd}-i386 since it requires
      unreasonable amounts of memory (closes: #759183).
    - Disable libpetsc3.4.2-dev and libslepc3.4.2-dev on amr64 since
      they are not available on this architecture.

 -- Johannes Ring <johannr@simula.no>  Fri, 29 Aug 2014 08:28:19 +0200

dolfin (1.4.0+dfsg-2) unstable; urgency=medium

  * Rename libdolfin1.4-dev to libdolfin-dev and remove dolfin-dev.

 -- Johannes Ring <johannr@simula.no>  Mon, 18 Aug 2014 10:21:43 +0200

dolfin (1.4.0+dfsg-1) unstable; urgency=medium

  * New upstream release.
  * debian/control:
    - Update package names for new SONAME 1.3 (libdolfin1.3 ->
      libdolfin1.4, libdolfin1.3-dbg -> libdolfin1.4-dbg and
      libdolfin1.3-dev -> libdolfin1.4-dev).
    - Bump minimum required version for python-instant, python-ufl and
      python-ffc to 1.4.0.
    - Add python-ffc (>= 1.4.0) to Build-Depends.
    - Replace swig2.0 with swig in Build-Depends.
    - Remove ufc and python-ufc from Build-Depends and from Depends for
      binary package libdolfin1.4-dev and python-dolfin (closes: #755727).
    - Add libdolfin1.3-dev in Conflicts and Replaces for binary package
      libdolfin1.4-dev.
    - Remove libarmadillo-dev from {Build-}Depends.
    - Remove libptscotch-dev from {Build-}Depends (closes: #741165).
  * Move debian/libdolfin1.3.install -> debian/libdolfin1.4.install
    and debian/libdolfin1.3-dev.install -> debian/libdolfin1.4-dev.install.
  * debian/rules:
    - Enable CGAL again (accidentally disabled in last upload).
    - No longer needed to remove .pyc files in get-orig-source target.
    - Add "export PERL_LWP_SSL_VERIFY_HOSTNAME=0" to get-orig-source
      target to help uscan download from Bitucket.
  * Remove patch for bug in Boost (fixed).
  * Add lintian override libdolfin1.4-dev: pkg-config-bad-directive.

 -- Johannes Ring <johannr@simula.no>  Mon, 11 Aug 2014 09:57:36 +0200

dolfin (1.3.0+dfsg-2) unstable; urgency=medium

  * debian/control:
    - Disable libcgal-dev on armhf and mips since it requires
      unreasonable amounts of memory (closes: 739697).
    - Disable libpetsc3.4.2-dev and libslepc3.4.2-dev on hurd-i386 since
      they are not available on this architecture.
  * Add patch to workaround bug in boost (thanks to Peter Green).
  * Use DEB_BUILD_MULTIARCH when installing the DOLFIN library and
    pkg-config file.

 -- Johannes Ring <johannr@simula.no>  Wed, 26 Feb 2014 12:23:11 +0100

dolfin (1.3.0+dfsg-1) unstable; urgency=medium

  * New upstream release.
  * Remove patches for PETSc/SLEPc 3.4 (no longer needed).
  * debian/docs: README -> README.rst and remove TODO.
  * debian/control:
    - Bump Standards-Version to 3.9.5 (no changes needed).
    - Add libeigen3-dev in Build-Depends and Depends for binary package
      libdolfin1.3-dev.
    - Add python-ply in Build-Depends.
    - Update package names for new SONAME 1.3 (libdolfin1.2 ->
      libdolfin1.3, libdolfin1.2-dbg -> libdolfin1.3-dbg and
      libdolfin1.2-dev -> libdolfin1.3-dev).
    - Bump minimum required version for ufc and python-ufc to 2.3.0, and
      for python-instant, python-ufl and python-ffc to 1.3.0.
    - Add libdolfin1.2-dev in Conflicts and Replaces for binary package
      libdolfin1.3-dev.
    - Add python-ply in Build-Depends.
  * Move debian/libdolfin1.2.install -> debian/libdolfin1.3.install
    and debian/libdolfin1.2-dev.install -> debian/libdolfin1.3-dev.install.
  * debian/libdolfin1.3-dev.install: Remove pkg-config file dolfin.pc
    (cmake files should be used instead).
  * debian/rules: Remove .pyc files in get-orig-source target.

 -- Johannes Ring <johannr@simula.no>  Fri, 14 Feb 2014 19:11:50 +0100

dolfin (1.2.0+dfsg-4) unstable; urgency=medium

  * Team upload.
  * CSGCGALMeshGenerator3D-oom.patch: new patch, workaround for FTBFS on some
    arches due to g++ eating all the RAM.

 -- Sébastien Villemot <sebastien@debian.org>  Sat, 14 Dec 2013 19:16:13 +0100

dolfin (1.2.0+dfsg-3) unstable; urgency=low

  * Team upload.
  * Refactor patches for PETSc/SLEPc 3.4, to fix a missing symbol in the library
    + petsc-slepc-3.4.2.patch: remove patch
    + {slepc,petsc}-3.4.patch: new patches taken from upstream

 -- Sébastien Villemot <sebastien@debian.org>  Sun, 27 Oct 2013 15:48:52 +0100

dolfin (1.2.0+dfsg-2) unstable; urgency=low

  * Team upload.
  * Update (build-)dependencies to libpetsc3.4.2-dev and
    libslepc3.4.2-dev.
  * petsc-slepc-3.4.2.patch: new patch to adapt for the new PETSC/SLEPC.

 -- Sébastien Villemot <sebastien@debian.org>  Sat, 26 Oct 2013 04:33:36 +0200

dolfin (1.2.0+dfsg-1) unstable; urgency=low

  * New upstream release (closes: #718636, #718153).
  * debian/control:
    - Replace libdolfin1.1 with libdolfin1.2 and libdolfin1.1-dev with
      libdolfin1.2-dev to follow library soname.
    - Bump required version for ufc, python-ufc, python-ffc, python-ufl,
      and python-instant.
    - Add libdolfin1.1-dev to Conflicts and Replaces for binary package
      libdolfin1.2-dev.
    - Bump Standards-Version to 3.9.4.
    - Remove DM-Upload-Allowed field.
    - Bump required debhelper version in Build-Depends.
    - Replace python-all-dev with python-dev in Build-Depends.
    - Remove cdbs from Build-Depends.
    - Use canonical URIs for Vcs-* fields.
    - Disable libcgal-dev on armel.
    - Enable libpetsc3.2-dev and libslepc3.2-dev on armhf and s390x.
    - Enable libptscotch-dev on all arches.
    - Add new debug package python-dolfin-dbg.
  * debian/compat: Bump to compatibility level 9.
  * debian/rules:
    - Rewrite for debhelper (drop cdbs).
    - Avoid hardcoding the swig2.0 version (closes: #692852).
    - Update get-orig-source target to remove non DFSG-free stuff,
      update watch file accordingly.
  * Update debian/copyright and debian/copyright_hints.
  * Move debian/libdolfin1.1.install to debian/libdolfin1.2.install and
    debian/libdolfin1.1-dev.install to debian/libdolfin1.2-dev.install
    to follow library soname.
  * Add dolfin-get-demos in dolfin-bin.install and add manual page for it.
  * Add all CMake files in libdolfin1.2-dev.install.

 -- Johannes Ring <johannr@simula.no>  Tue, 06 Aug 2013 16:49:23 +0200

dolfin (1.1.0-1) UNRELEASED; urgency=low

  * New upstream release.
  * debian/control:
    - Replace libdolfin1.0 with libdolfin1.1 and libdolfin1.0-dev with
      libdolfin1.1-dev to follow library soname.
    - Bump required version for ufc, python-ufc, python-ffc, python-ufl,
      and python-instant.
    - Add libdolfin1.0-dev to Conflicts and Depends for binary package
      libdolfin1.1-dev.
    - Add libvtk5-dev, libvtk5-qt4-dev, libqt4-dev, libhdf5-mpi-dev,
      libboost-timer-dev and libboost-chrono-dev to Build-Depends and in
      Depends field for binary package libdolfin1.1-dev.
    - Add python-ply to Depends for binary package python-dolfin.
    - Remove python-viper from Depends for binary package python-dolfin.
  * debian/rules: Enable building with HDF5, VTK, and QT.
  * Move debian/libdolfin1.0.install to debian/libdolfin1.1.install and
    debian/libdolfin1.0-dev.install to debian/libdolfin1.1-dev.install
    to follow library soname.
  * debian/patches: Remove patches now fixed upstream.
  * Determine swig2.0 version at build time (closes: #692852). Thanks to
    Stefano Riviera for the patch.

 -- Johannes Ring <johannr@simula.no>  Thu, 10 Jan 2013 11:28:21 +0100

dolfin (1.0.0-7) unstable; urgency=low

  * debian/control:
    - Remove Conflicts and Replaces from binary package libdolfin1.0-dbg.
    - Update long description for all packages.
    - Add python-netcdf to Depends for binary package python-dolfin
      (closes: #674014).
    - Require SWIG upstream version 2.0.7 for binary package
      python-dolfin (closes: #675207).
    - Require UFC >= 2.0.5-3.

 -- Johannes Ring <johannr@simula.no>  Fri, 29 Jun 2012 09:45:28 +0200

dolfin (1.0.0-6) unstable; urgency=low

  * debian/rules: Set default Python version to fix FTBFS when Python3
    is available (closes: #672952).
  * debian/control: Remove Provides: libdolfin0-dev from
    libdolfin1.0-dev (and same to -dbg package).

 -- Johannes Ring <johannr@simula.no>  Mon, 21 May 2012 10:09:59 +0200

dolfin (1.0.0-5) unstable; urgency=low

  * Add patches to fix problems with SWIG 2.0.5 and GCC 4.7.
  * debian/control: Require UFC >= 2.0.5-2.

 -- Johannes Ring <johannr@simula.no>  Mon, 14 May 2012 11:25:47 +0200

dolfin (1.0.0-4) unstable; urgency=low

  * debian/watch: Replace http with https in URL.
  * debian/control:
    - Add libcgal-dev to Build-Depends and Depends for binary package
      libdolfin1.0-dev.
    - Bump Standards-Version to 3.9.3 (no changes needed).
  * debian/rules:
    - Enable CGAL support.
    - Call dh_numpy in binary-install/python-dolfin target to fix
      lintian error missing-dependency-on-numpy-abi.

 -- Johannes Ring <johannr@simula.no>  Tue, 20 Mar 2012 14:47:27 +0100

dolfin (1.0.0-3) unstable; urgency=low

  * Disable building with PETSc, SLEPc and SCOTCH on some arches.

 -- Johannes Ring <johannr@simula.no>  Tue, 14 Feb 2012 11:46:11 +0100

dolfin (1.0.0-2) unstable; urgency=low

  * debian/control:
    - Replace libpetsc3.1-dev and libslepc3.1-dev with libpetsc3.2-dev
      and libslepc3.2-dev, respectively.
    - Require libptscotch-dev, libpetsc3.2-dev and libslepc3.2-dev on
      all arches.
  * debian/rules: Help CMake find version 3.2 of PETSc and SLEPc by
    defining PETSC_DIR and SLEPC_DIR variables, respectively.

 -- Johannes Ring <johannr@simula.no>  Mon, 30 Jan 2012 11:45:31 +0100

dolfin (1.0.0-1) unstable; urgency=low

  * New upstream release.
  * debian/control:
    - Bump version numbers for python-ufc, python-ffc, python-viper,
      python-ufl and python-instant in Depends field for binary package
      python-dolfin.
    - Bump version numbers for ufc and python-ufc in Build-Depends and
      in Depends field for binary package libdolfin1.0-dev.

 -- Johannes Ring <johannr@simula.no>  Thu, 08 Dec 2011 08:47:31 +0100

dolfin (1.0-rc2-1) unstable; urgency=low

  * New upstream release.
  * debian/control: Bump version for ufc and python-ufc to 2.0.4.

 -- Johannes Ring <johannr@simula.no>  Tue, 29 Nov 2011 11:44:52 +0100

dolfin (1.0-rc1-1) unstable; urgency=low

  * New upstream release.
  * debian/control:
    - Update Homepage field.
    - Add libboost-math-dev to Build-Depends and in Depends field for
      binary package libdolfin1.0-dev.
  * Disable Trilinos support (version >= 10.8.1 now required).
  * Remove patch for building with Trilinos.
  * Update debian/copyright and debian/copyright_hints.

 -- Johannes Ring <johannr@simula.no>  Tue, 22 Nov 2011 12:10:02 +0100

dolfin (1.0-beta2-1) unstable; urgency=low

  * New upstream release.
  * Add lintian override dolfin-dev: empty-binary-package.
  * debian/control:
    - Add libboost-mpi-dev in Build-Depends and in Depends field for
      binary package libdolfin1.0-dev.
    - Bump version numbers for dependencies ufc, python-ufc, python-ffc,
      and python-ufl.
  * debian/patches: Remove patch for importing PyTrilinos before DOLFIN
    as this is now fixed upstream.

 -- Johannes Ring <johannr@simula.no>  Thu, 27 Oct 2011 13:17:47 +0200

dolfin (1.0-beta-1) unstable; urgency=low

  * New upstream release. This release fixes a large number of bugs and
    brings many improvements. The most notable changes are improved
    support for parallel computing and a redesigned and simplified
    interface for solving variational problems.
  * debian/control:
    - Add libboost-iostreams-dev to Build-Depends and to Depends in -dev
      package.
    - Replace libdolfin0 with libdolfin1.0 and libdolfin0-dev with
      libdolfin1.0-dev to follow library soname.
    - Bump required version for ufc, python-ufc, python-ffc,
      python-viper, python-ufl, and python-instant.
    - Add provide, replace and conflict on libdolfin0-dev for binary
      package libdolfin1.0-dev. Similarly for libdolfin1.0-dbg.
  * Add patch for importing PyTrilinos before dolfin (closes: #631589).
  * Rename libdolfin0.install to libdolfin1.0.install and
    libdolfin0-dev.install to libdolfin1.0-dev.install to follow library
    soname.

 -- Johannes Ring <johannr@simula.no>  Wed, 17 Aug 2011 12:01:58 +0200

dolfin (0.9.11-1) unstable; urgency=low

  * New upstream release. This release moves to SWIG 2.0 and it
    incorporates a significant number of bug fixes.
  * debian/control:
    - Bump Standards-Version to 3.9.2 (no changes needed).
    - Replace swig with swig2.0 in Build-Depends.
    - Add swig2.0 to Depends for binary package python-dolfin.
    - Bump required version for ufc and python-ufc in Build-Depends.
    - Bump required version for ufc, python-ufc, python-ffc, python-ufl
      and python-instant in Depends for binary packages libdolfin0-dev
      and python-dolfin.
  * debian/rules:
    - Set SWIG_EXECUTABLE to /usr/bin/swig2.0.
    - Use DEB_COMPRESS_EXCLUDE_ALL instead of deprecated
      DEB_COMPRESS_EXCLUDE.
    - Include cdbs utils.mk rule for automated copyright checks.
  * debian/copyright:
    - Update for upstream license change to LGPLv3.
    - Switch to DEP-5 format.
  * Remove custom cdbs rules and licensecheck script for copyright check.
  * Disable MPI on lam architectures (closes: #627172).
  * Add patch to fix FTBFS when Trilinos is enabled (closes: #624925).

 -- Johannes Ring <johannr@simula.no>  Wed, 18 May 2011 13:30:21 +0200

dolfin (0.9.10-2) unstable; urgency=low

  * Move from python-central to dh_python2 (closes: #616793).
    - Remove python-central from Build-Depends.
    - Bump minimum required python-all-dev package version to 2.6.6-3~.
    - Remove XB-Python-Version line.
    - Bump minimum required cdbs version to 0.4.90~.
    - Replace XS-Python-Version with X-Python-Version.
    - Replace call to dh_pycentral with dh_python2 in debian/rules.
  * Build for all supported Python versions.
  * Remove some unnecessary packages in Depends for binary packages
    libdolfin0 and libdolfin0-dev.
  * Add ufc and python-ufc in Depends for binary package libdolfin0-dev.
  * Add python-ufc, python-ffc, python-viper, python-ufl python-instant,
    and python-numpy in Depends for binary package python-dolfin.
  * Disable building with PETSc and SLEPc on some architectures.
  * Remove old Provides field for binary package python-dolfin.

 -- Johannes Ring <johannr@simula.no>  Fri, 15 Apr 2011 09:17:37 +0200

dolfin (0.9.10-1) unstable; urgency=low

  * New upstream release. This release fixes bug "FTBFS: error:
    'SCOTCH_Dgraph' was not declared in this scope" (closes: #612602).
  * debian/control:
    - Add libslepc3.1-dev and libboost-thread-dev to Build-Depends and
      Depends field in binary package libdolfin0-dev.
    - Bump build dependency on python-ufc to >= 2.0.0.
    - Remove Build-Depends-Indep field as upstream no longer ships the
      user manual.
    - Remove old fields Conflicts, Provides, and Replaces from
      libdolfin0-dev, libdolfin0, libdolfin0-dbg, and python-dolfin.
  * Remove all patches as they are now incorporated upstream.
  * Add dolfin-plot and dolfin-version to debian/dolfin-bin.install.
  * Remove .doc-base file since the user manual is removed by upstream.
  * Remove targets clean and install/dolfin-doc from debian/rules since
    they are no longer needed.

 -- Johannes Ring <johannr@simula.no>  Thu, 24 Feb 2011 10:34:44 +0100

dolfin (0.9.9-4) unstable; urgency=low

  * Update Homepage field in debian/control and Maintainer field in
    debian/copyright.
  * Add patch for generating correct pkg-config file dolfin.pc.

 -- Johannes Ring <johannr@simula.no>  Tue, 11 Jan 2011 12:36:55 +0100

dolfin (0.9.9-3) unstable; urgency=low

  * Add patch from upstream to fix problem with the CMake config file
    (dolfin-config.cmake) having the wrong path to the DOLFIN library.

 -- Johannes Ring <johannr@simula.no>  Tue, 14 Sep 2010 18:45:39 +0200

dolfin (0.9.9-2) unstable; urgency=low

  * debian/rules: Make CMake skip adding runtime paths.

 -- Johannes Ring <johannr@simula.no>  Tue, 14 Sep 2010 10:49:24 +0200

dolfin (0.9.9-1) unstable; urgency=low

  * New upstream release.
  * Switch to CMake CDBS class:
    - Replace scons with cmake in Build-Depends and in Suggests for
      binary package dolfin-doc.
    - Add cmake to Depends field for binary package libdolfin0-dev.
    - Install CMake config file for DOLFIN with package libdolfin0-dev.
  * debian/control:
    - Update version for python-ufc in Build-Depends field.
    - Update version for python-ufl in Depends field for binary package
      libdolfin0-dev.
    - Update version for ufc and python-ffc in Depends field for binary
      package libdolfin0-dev.
    - Bump Standards-Version to 3.9.1 (no changes needed).
  * Add patches from upstream to help CMake find PETSc, SLEPc, and
    Trilinos and for installing some missing utilities (dolfin-convert
    and dolfin-order) and manual pages.
  * Update debian/copyright and debian/copyright_hints.

 -- Johannes Ring <johannr@simula.no>  Mon, 13 Sep 2010 11:45:17 +0200

dolfin (0.9.8-3) unstable; urgency=low

  * Disable Trilinos on non-supported platforms (closes: #590100).

 -- Johannes Ring <johannr@simula.no>  Wed, 04 Aug 2010 16:47:38 +0200

dolfin (0.9.8-2) unstable; urgency=low

  * Fix generation of pkg-config file dolfin.pc.

 -- Johannes Ring <johannr@simula.no>  Sun, 04 Jul 2010 20:41:45 +0200

dolfin (0.9.8-1) unstable; urgency=low

  * New upstream release.
  * debian/control: 
    - Update version for python-ufc in Build-Depends field.
    - Update version for python-ufl in Depends field for binary package
      libdolfin0-dev.
    - Update version for ufc, python-ffc, and python-viper in Depends
      field for binary package libdolfin0-dev.
    - Add libarmadillo-dev to Build-Depends and Depends for binary
      package libdolfin0-dev.
  * Allow building against either version 3.0.0 or 3.1 of PETSc. 
  * Remove patches (added upstream).
  * Switch to dpkg-source 3.0 (quilt) format.
  * Update debian/copyright and debian/copyright_hints.
  * Enable Trilinos support.

 -- Johannes Ring <johannr@simula.no>  Fri, 02 Jul 2010 13:24:21 +0200

dolfin (0.9.7-5) unstable; urgency=low

  * Add patch from upstream to detect and build with SCOTCH.

 -- Johannes Ring <johannr@simula.no>  Mon, 14 Jun 2010 13:15:04 +0200

dolfin (0.9.7-4) unstable; urgency=low

  * Add support for PETSc 3.1 (closes: #583419).
  * Minor fix in Vcs fields in debian/control.

 -- Johannes Ring <johannr@simula.no>  Mon, 07 Jun 2010 09:25:13 +0200

dolfin (0.9.7-3) unstable; urgency=low

  * debian/rules: Remove bashism (closes: #581470).

 -- Johannes Ring <johannr@simula.no>  Thu, 20 May 2010 10:27:06 +0200

dolfin (0.9.7-2) unstable; urgency=low

  * Package moved from pkg-scicomp to Debian Science.
  * Enable building for multiple Python versions.
  * debian/control:
    - Replace python-dev with python-all-dev in Build-Depends.
    - Update version dependencies for python-ufc, ufc, python-ffc, and
      python-viper (closes: #571780).
    - Replace libscotch-dev with libptscotch-dev in Build-Depends and in
      Depends for binary package libdolfin0-dev.
  * Add configure target to cdbs tweaks for scons.
  * Rename binary package python-pydolfin0 to python-dolfin.

 -- Johannes Ring <johannr@simula.no>  Tue, 27 Apr 2010 17:21:22 +0200

dolfin (0.9.7-1) unstable; urgency=low

  * New upstream release.
  * debian/control: Add pkg-config to Build-Depends and Depends in
    binary package libdolfin0-dev.
  * Do not build with GTS (support was removed upstream).
  * Keep debian/copyright and debian/copyright_hints up to date.

 -- Johannes Ring <johannr@simula.no>  Thu, 18 Feb 2010 00:40:38 +0100

dolfin (0.9.6-2) unstable; urgency=low

  * Disable support for Trilinos for now.

 -- Johannes Ring <johannr@simula.no>  Sat, 13 Feb 2010 09:55:48 +0100

dolfin (0.9.6-1) unstable; urgency=low

  * New upstream release.
  * debian/control:
    - Add libtrilinos-dev to Build-Depends and Depends for binary
      package libdolfin0-dev.
    - Add python-pytrilinos to Build-Depends and Depends for binary
      package python-pydolfin0.
    - Bump Standards-Version to 3.8.4 (no changes needed).
  * debian/rules:
    - Enable building with Trilinos.
    - Remove some old lintian fixes.
    - Fix problem when generating pkg-config dolfin.pc in
      install/libdolfin0-dev target.
  * debian/copyright: Keep up-to-date with new and removed files.

 -- Johannes Ring <johannr@simula.no>  Fri, 12 Feb 2010 10:27:02 +0100

dolfin (0.9.5-1) unstable; urgency=low

  * New upstream release. This release simplifies the use of Constants
    and Expressions in both the C++ and Python interfaces, with the
    automatic selection of function spaces from Python. Support for
    computing eigenvalues of symmetric matrices has been improved and a
    number of small bugs have been fixed.
  * debian/watch: Update download URL.
  * debian/copyright: Update for new and removed files.
  * debian/rules: 
    - Include new adaptivity demos in dolfin-doc package.
    - Disable ParMETIS and MTL4 explicitly.
  * Add debian/dolfin-doc.doc-base for DOLFIN user manual.
  * debian/control: Slight modifications in package descriptions.
  * debian/python-pydolfin0.install: Allow both site-packages and
    dist-packages.

 -- Johannes Ring <johannr@simula.no>  Thu, 10 Dec 2009 11:53:04 +0100

dolfin (0.9.4-1) unstable; urgency=low

  * New upstream release. This version cleans up the design of the
    function class by adding a new abstraction for user-defined
    functions called Expression. A number of minor bugfixes and
    improvements have also been made.
  * debian/watch: Update for new flat directory structure.
  * Update debian/copyright.
  * debian/rules: Use explicit paths to PETSc 3.0.0 and SLEPc 3.0.0.

 -- Johannes Ring <johannr@simula.no>  Mon, 12 Oct 2009 14:13:18 +0200

dolfin (0.9.3-1) unstable; urgency=low

  * New upstream release. This version provides many new features,
    improvements and bug fixes, including improved XML file handling,
    improved Python support and compressed VTK file output. Experimental
    parallel assembly and solve is now available, with fully distributed
    meshes, parallel mesh partitioning and parallel IO.
  * debian/control:
    - Add DM-Upload-Allowed: yes.
    - Bump debhelper version to 7.
    - Bump Standards-Version to 3.8.3 (no changes needed).
    - Add libboost-program-options-dev and libboost-filesystem-dev to
      Build-Depends and to Depends for binary package libdolfin0-dev.
  * debian/rules:
    - Update for new 3 step build process.
    - Build documentation.
  * Update debian/copyright.
  * Remove old patches (now included upstream).
  * Remove (temporary) support for Trilinos because of #529807.

 -- Johannes Ring <johannr@simula.no>  Mon, 28 Sep 2009 09:21:05 +0200

dolfin (0.9.2-2) unstable; urgency=low

  * debian/control: 
    - add build-dependency on libtrilinos-dev and
      libboost-serialization-dev (closes: #540118). 
    - add libtrilinos-dev to Depends field for -dev package.
    - add python-pytrilinos to Depends field for python- package.
    - change -dbg package section to debug (removes lintian warning).
    - update Standard-Version to 3.8.2.
  * debian/rules: enable building against Trilinos.
  * debian/patches: add patch for build system to find Trilinos (taken
    from upstream development repository).

 -- Johannes Ring <johannr@simula.no>  Mon, 10 Aug 2009 16:03:52 +0200

dolfin (0.9.2-1) unstable; urgency=low

  * Initial release (Closes: #503082)

 -- Johannes Ring <johannr@simula.no>  Tue, 16 Sep 2008 08:41:20 +0200