.TH DWARFDUMP
.SH NAME
dwarfdump \- dumps DWARF debug information of an ELF object
.SH SYNOPSIS
.B dwarfdump [options] \f2objectfilename\fP
.SH DESCRIPTION
The 
.B dwarfdump
command prints or checks DWARF sections as
requested by specific options.
With no options (but with the required \f2objectfilename\fP
) all sections print (but some sections cannot be printed
independently safely, so those are only printed at offsets
where the .debug_info section refers to those sections).
.PP
For split-dwarf (DWARF5) object files see
Split Object Files, DWARF5 section 7.3.

.PP
Nearly all options are available in the traditional (single-letter)
form and in a long-options form with meaningful names.
New options are only in the long-options form.

.PP
With no options 
.B dwarfdump
prints a basic set of DWARF section information. 
If any option is given on the command line the
basic set is ignored and one must tell 
.B dwarfdump
what to print or check (for example by adding
the 
.B \-a
option).

.PP
As of June 2011 the printing options and the checking options
are mutually exclusive (if checking options are selected the
section details are not printed). When errors are encountered
dwarfdump does attempt to print sufficient context so that
one can understand exactly where the error is in the DWARF.
This change makes checking really large object files much
easier.
.PP
The format is intended to be human readable.
If a script is to parse the output, the
.BR \--format-dense\ (\-d)
option is useful.
.PP
As of December 2020 DWARF expressions
are broken out to print each expression
(DW_OP_plus for example) in a block
on a separate line. 
To restore the previous behavior, sort
of like \--format-dense but only applying
to blocks of DWARF expression operators
(DW_OP*).
the
.BR \--format-expr-ops-joined
is useful.
If the option is placed in the dwarfdump.conf
file (see the file itself for the format)
it will apply without needing to put it
on the command line.

.PP
Not all sections actually exist in any given object file.
.PP
The output format may change from release to release, so it is
unwise to depend too heavily on the format.
.PP
Frame information (.debug_frame and .eh_frame) is heavily
dependent on the ABI/ISA of the object file. 
By default we use a generic set of register names
handling up to 100 registers named r0-r99.
.PP
As of 2020 there are three different ways
compiler writers separate the DWARF information
from an executable/shared-object.
One is DWARF5 Split Dwarf (the \--file-tied
option is useful for these). Another
is GNU debuglink (libdwarf automatically
finds the DWARF when given the name
of the executable, use \--no-follow-debuglink
to suppress this and make possible printing
the backtrace data in section \.eh_frame).
The third way is on MacOS: the debug DWARF
is in a separate object (dwarfdump/libdwarf
automatically find it if it is present,
\--no-follow-debuglink suppresses this finding).
.PP
In many cases one can get additional detail
by specifying \-v (sometimes \-v \-v gets
even more, see the --verbose
discussion below).
When printing DIEs (Debugging
Information Entries) the options \-G
(showing global offsets)
and \-M (naming the DW_FORM* of attributes)
(or their -- counterparts)
can be a great aid to understanding DWARF..

The 
.BR \--format-registers\ (\-R)
option uses a built-in generic register name set
handling up to 1200 registers named r0-r1199.
.PP

The 
.BR \-file-abi=<abi>\ (\-x\ abi=<abi>)
description below shows how to name
an abi and use that to guide
the 
.BR \--print-frame\ (\-f)
or
.BR \--print-eh-frame\ (\-F)
processing.
.PP
Unless one of
.BR \--print-frame\ (\-f)
or
.B \--print-eh-frame\ (\-F) 
or
.BR \--print-all\ (\-a)
is used any abi reference is ignored
because no frame data will be printed.

.PP
Unless the cpu for the object file being dumped has many registers,
do not use 
.B \--format-registers
or 
.B \-file-abi=<abi>
as those can be needlessly 
slow dumping frame sections. Instead, use the correct
abi (if it exists in dwarfdump.conf) or a generic such
as
.B \--file-abi=abi=generic100 
or
.B \--file-abi=abi=generic500 
 .
.PP
The most useful abi choices are likely
.B mips
or
.B x86
or
.B x86_64
or
.B ppc
or 
.B arm
 .
Without 
.BR \--format-registers\ (\-R)
or 
.BR \-file-abi=<abi>\ (\-x\ abi=<abi>)
dwarfdump ignores
the dwarfdump.conf file and uses compiled-in generic set of
register names.
If no 
.BR \--file-name=<path>\ (\-x\ name=<path>)
is given, dwarfdump
looks for "./dwarfdump.conf", 
"$HOME/.dwarfdump.conf", 
"<install-prefix>/lib/dwarfdump.conf" 
and takes the first it finds.
If one or more 
.BR \--file-name=<path>\ (\-x\ name=<path>)
is given the last of these is
used and all other such files are ignored.
.PP
Some checking (
.BR \-k )
options 
(See "Check DWARF Integrity" in the help output)
print so-called harmless errors.
These are compiler errors that do not cause any
known problem and are only detected inside libdwarf itself.
These are difficult to properly report in dwarfdump and
any error strings may not appear close to the time the
error was encountered.
.PP
If zlib compression was used on the DWARF sections
in the object file being read the
real section names such as .zdebug_info etc will be reported by
dwarfdump.  
When dwarfdump says something is at offset 55 
of .zdebug_info (or the like) keep in mind that 
the offset applies to the
uncompressed section (in memory), 
not the .zdebug_ compressed section
in \f2objectfilename\fP. 
.SH URI-STYLE INPUT STRINGS
.PP
The <objectfilename> and all the options taking
name strings look for URIs and
translate the URI strings to characters by default.
So any single % character is treated as if the following two
characters are hex digits representing the underlying true character.
Various characters are meaningful to shells (such as bash or sh) 
and to getopt (such as the space character) 
If the URI translation does anything it prints the before and after
of the URI translation on standard output, so inspection of the first
lines of output will show if URI did anything.
The actual options themselves are assumed to be non-URI.
So in the option 
.BR \--format-producer=S&T\ (\-cS&T)
the & character might cause input issues so 
.B \--format-producer=S%26T
should be used instead.
To actually input a single % character (in a name, for example), 
double it to %% on the command line (or simply use %25).
.PP
Options 
.BR \--format-suppress-uri\ (\-U)
(turning off URI interpretation) and 
.BR \--format-suppress-uri-msg\ (\-q)
(making finding
URI sequences silent) give finer control of URI interpretation.
.PP
As an example, to get a string 'a b' make the string 'a%20b'
(here the quote (') is for exposition not part of the string, though
quote is certainly problematic in a name).
Instead of escaping " quotes in the string, type %25, as 
in 'a "b' should be typed 'a%20%25b'.
Any characters can be typed in URI style, not just characters
which are problematic to the shell or getopt.
We strongly suggest you not type URI-style characters where
such are not needed or use
the % character itself in command line strings unless you must.
.SH URI-STYLE OUTPUT (printing)
.PP
Dwarfdump translates any characters
in strings which are not ordinary
printable ASCII (and some which are ASCII)
in the reverse of the previous section.
It prints into a uri-style output in the form %xx,
where xx are hex digits in the form of
ASCII 0-9a-0f.
The percent character(%) is printed as '%25'
.P
This is a clumsy way to
deal with UTF-8 strings and sensible way
to deal with the low ASCII values that on
many systems cause one's terminal to behave
oddly. Such translations are not idempotent
so dwarfdump avoids doing the translation
more than once on any string.
See option \--format-suppress-sanitize
below to eliminate the output transformation.

.SH PRINTING OPTIONS
.TP
.BR \--print-all\ (\-a)
Print each section as independently as possible. Sections that
can safely be printed independently (like .debug_abbrev)
have relevant info printed in the report (sometimes dependent
on -v).

.TP
.BR \--print-abbrev\ (\-b)
Print the .debug_abbrev section. Because the DWARF specifications
do not rule out garbage data areas in .debug_abbrev (if they are not
referenced from .debug_info) any garbage bytes can result in
this print failing.

.TP
.BR \--print-loc\ (\-c)
Print locations lists.

.TP
.BR \--print-debug-gnu
Print  the .debug_gnu_pubnames
and .debug_gnu_typenames sections.

.TP
.BR \--print-fission
Print  the .gdb_index, .debug_cu_index,
 .debug_tu_index, .gnu.debuglink,
  and .note.gnu.build-id sections.

.TP
.BR \--print-gnu-debuglink
Print .gnu_debuglink and .note.gnu.build-id sections

.TP
.BR \--elf\ (\-E)    
prints,
for Elf objects, object file details.
See the "Print ELF Section Headers" section of
the help file for additional choices on elf printing.
If libdwarf or dwarfdump is built without libelf
this and related options are not available.

.TP
.BR \--print-frame\ (\-f)
Print the .debug_frame section.
.TP
.BR \--print-eh-frame\ (\-F)
Print the GNU .eh_frame section.

.TP
.BR \--print-info\ (\-i)
Print the .debug_info section.

.TP
.BR \--print-fission\ (\-I)
Print any .gdb_index, .debug_cu_index,
and .debug_tu_index sections
that exist in the object.

.TP
.BR \--print-gnu-debuglink
If the .gnu_debuglink section
is present its content is printed.
If the .note.gnu.build-id section
is present its content is printed.
If a DWARF containing file
named by the content
of the .gnu_debuglink section
exists the name will be printed.

.TP
.BR \--print-lines\ (\-l)
Print the .debug_info section and 
the associated line section data.
.TP
.BR \--print-lines-short\ (\-ls)
Print the .debug_info section and 
the associated line section data, but omit
the <pc> address. 
Useful when a comparison of line sections
from objects
with slight differences is required.

.TP
.BR \--print-macinfo\ (\-m)
Print the .debug_macinfo (DWARF 2,3,4) and .debug_macro
(DWARF5) sections.

.TP
.BR \--print-ranges\ (\-N)
Print .debug_ranges section. 
Because the DWARF specifications
do not rule out garbage data areas in .debug_ranges
(if they are not
referenced from .debug_info) any garbage bytes can result in
this print failing.

.TP
.BR \--print-pubnames\ (\-p)
Print the .debug_pubnames section.

.TP
.B \--print-str-offsets
Print the .debug_str_offsets section.

.TP
.BR \--print-aranges\ (\-r)
Print the .debug_aranges section.
.TP
.BR \--print-strings\ (\-s)
Print .debug_string section.

.TP
.BR \--print-static\ (\-ta)
Print the IRIX only sections .debug_static_funcs
and .debug_static_vars.

.TP
.BR \--print-type\ (\-y)
Print the .debug_pubtypes section
(and .debug_typenames, an SGI IRIX-only section).

.PP
Having dwarfdump print relocations may help establish whether
dwarfdump understands any relocations that might exist.
Other tools may be more useful than dwarfdump
for printing object-file details.
If dwarfdump or libelf is built without libelf
the relocation options are not available.
See "Print Elf Relocation Data" in the help output for
additional relocation printing choices.

.TP
.BR \--reloc\ (\-o)    
Print all relocation records as well as we can manage.
If libdwarf or dwarfdump were built without libelf
this option is unavailable.

.TP
.BR \--version\ (\-V)  
Print a dwarfdump date/version string and stop.

.SH CHECKING OPTIONS
.TP
.BR \--check-all\ (\-ka)
Turns on all checking options except 
.BR \--check-frame-extended\ (\-kxe)
(which might
be slow enough one 
might not want to use it routinely.)

.TP
.BR \--check-abbrev\ (\-kb)
Checks for certain abbreviations section errors when reading DIEs.

.TP
.BR \--check-constants\ (\-kc) 
Checks for errors in constants in debug_info.
.TP
.BR \-check-show\ (\-kd) 
Turns on full reporting of error totals per producer.
(the default shows less detail).
.TP
.BR \--check-silent \-ks 
Turns off some verbose checking detection.

.TP
.BR \--check-attr-dup\ (\-kD) 
Turns on reporting of duplicated attributes.
Duplicated attributes on a single DW_TAG are
improper DWARF, but at least one compiler
emitted such.
.TP
.BR \--check-pubnames\ (\-ke)
Turns on reading pubnames and checking for fde errors.
.TP
.BR \--check-attr-encodings\ (\-kE) 
Checks the integer encoding representation in debug_info,
computing whether these integer values
could fit in fewer bytes if represented in LEB128.

.TP
.BR \--check-frame-info\ (\-kf) 
Turns on checking for FDE errors (.debug_frame 
and .eh_frame).
.TP
.BR \--check-files-lines\ (\-kF) 
Turns on checking for line table errors.
.TP
.BR \--check-gaps\ (\-kg) 
Turns on checking for unused gaps in .debug_info (these
gaps are not an error, just a waste of space).
.TP
.BR \--check-unique\ (\-kG) 
Print only unique errors. Error lines are simplified
(hex numbers removed, for example) and when
a given message string would otherwise appear 
again it is suppressed.
.TP
.BR \--check-summary\ (\-ki) 
Causes a summary of checking results per compiler (producer)
to be printed at the end.

.TP
.B \--check-loc\ (\-kl) 
Turns on locations list checking.
.TP
.B \--check-ranges\ (\-km) 
Turns on checking of ranges.
.TP
.BR \--check-aranges\ (\-kM) 
Turns on checking of aranges.
.TP
.BR \--check-tag-attr\ (\-kr)
Turns on DIE tag-attr combinations checking,
looking for surprising attributes for DIE
tags.
It does not report common extensions as errors.
Common extensions to the standard are
allowed as if standard.
See
the \-C (\--format-extensions) option
to show common extensions as errors.
.TP
.BR \--check-forward-refs\ (\-kR)
Turns on reading DIEs and checking for forward declarations
from DW_AT_specification attributes.
(which are not an error but can be a source of inefficiency
for debuggers).
.TP
.BR \--check-self-refs\ (\-kS) 
Turns on checking DIE references for circular references.
.TP
.BR \--check-tag-tag\ (\-kt) 
Turns on tag-tag combinations checking,
looking for surprising parent-child DIE
relationships.
It does not report common extensions as errors.
Common extensions to the standard are
allowed as if standard.
See
the \-C (\--format-extensions) option
to show common extensions as errors.
.TP
.BR \--check-usage\ (\-ku) 
Print tag-tree and tag-attribute usage (basic format). 
.TP
.BR \--check-usage-extended\ (\-kuf)
Print tag-tree and tag-attribute usage (full format). 
For standard TAGs and ATtributes this presents an overview
of how they were used.

.TP
.BR \--check-frame-basic\ (\-kx) 
Turns on basic frames checking for .debug_frame
and .eh_frame).
.TP
.BR \--check-frame-extended\ (\-kxe)
Turns off basic check_frames and 
turns on extended frame checking
for .debug_frame
and .eh_frame.
This option can be slow.

.TP
.BR \--check-type\ (\-ky) 
Turns on type_offset checking (ensuring
local attribute  offsets refer to what they should)
and that DW_AT_decl_file and some other offsets
refer to appropriate locations.

.SH OPTION MODIFIERS

.TP
.BR \--format-extensions\ (\-C) 
This is a secondary option 
after \--check-tag-tag\ (\-kt)
or \--check-tag-attr\ (\-kr).
Normally when checking for tag-tag 
or tag-attribute combinations
both the standard combinations and 
some common extensions are allowed
(not reported).
With this option the extensions are taken
out of the class of allowed combinations.

.TP
.BR \--format-dense\ (\-d)
When printing DIEs, put all the 
attributes for each DIE on the same (long)
line as the TAG. This makes searching for DIE information
(as with grep) much simpler as the entire DIE is on one line.

.TP
.BR \--format-suppress-offsets\ (\-D)
Turns off the display of section offsets
and attribute values in printed output.
So the .debug_info output is just TAGs and Attributes.
For pubnames (and the like) it removes offsets from the output.
For locations lists it removes offsets from the output, but that
is useless since the attribute values don't show so neither does
the location data.

.TP
.BR \--format-ellipsis\ (\-e)
Turns on truncation of attribute and tag names. For example
DW_TAG_foo becomes foo. Not compatible with
checking, only useful for printing DIEs.

.TP
.BR \--format-global-offsets\ (\-G)
When printing, add global offsets to
the offsets printed.

.TP
.BR  \--format-limit=<num>\ (\-H\ number) 
When printing or checking .debug_info, this terminates
the search after 'number' compilation units. When printing
frame information this terminates the FDE reporting 
after 'number' FDEs and the CIE
reporting (which occurs if one adds -v)
after 'number' CIEs. Example '--format-limit=1'

.TP
.BR \--format-attr-name\ (\-M) 
When printing, show the FORM
for each attribute.
If a -v is added (or more than one)
then details of any form indirection
are also shown.

.TP
.BR \--format-suppress-lookup\ (\-n) 
When printing frames, this turns off the search for function names
in inner scopes.
Unless the language used to build the object file
supports function definitions in inner scopes
there is no point in looking for function names in inner scopes.
And a really large object the search can take more time than
one wants to wait.
This option suppresses the inner scope search.

.TP
.BR \--file-output=<path>\ (\-O file=<path>)
The <path> will be used as the file name for output instead 
of writing to stdout (stdout is the default).

.TP
.BR \--format-suppress-data\ (\-Q) 
Suppresses section data printing
(set automatically with a checking option).

.TP
.BR \--format-suppress-sanitize
Suppresses the default string-printing 
translations so
non-ascii and non-printable characters
from the object file
are printed as-is.
See "URI-STYLE OUTPUT" above.

.TP
.BR \--format-suppress-uri\ (\-U) 
Suppresses the default URI translation
of following options on the command line.
See "URI-STYLE INPUT STRINGS" above.

.TP
.BR \--format-registers\ (\-R) 
When printing frames for ABIs with lots of registers, this allows
up to 1200 registers to be named (like R999) without choosing an ABI
with, for example '-x abi=ppc' or,
equivalently, '--file-abi=ppc'

.TP 
.BR \--verbose\ (\-v)
Increases the detail shown when printing.
In some sections, using more -v options
will increase the detail (one to four are useful) or may
change the report to show, for example, the actual
line-data-commands instead of the resultant line-table.
Two to four -v options make a difference when
printing DIEs and rnglists (-i), 
lines (-l), frames (-f,-F), gdb_index(-I).
Additional -v beyond four do not currently
add-to or change the output. 

.SH LIMITING OUTPUT

.PP
The simplest limiting option is to stop the
examination/printing after <num> compilation units.
See -H and  --format-limit above.
This option also limits the number of FDEs
and CIEs printed from any .debug_frame or .eh_frame
section.

.PP
The --search (-S) options 
print information about the compilation
unit and DIE where the string(s) appear.
These cannot be combined with other options.
At most one of each of the following
is effective (so for example
one can only have one 'match', but one can 
have a 'match', an 'any', and a 'regex').
Any --search (-S) causes the .debug_info section to be inspected.
No checking options or printing options should be supplied 
with --search(-S) options.
The strings should use URI-style to avoid any conflicts
with the command-line parser applicable (bash, sh, ...)
or getopt(), as well as using URI to deal with searching
for strings in non-ASCII such as French, (etc)
or the now-nearly-universal UTF8.

These are particularly useful when the amount of
DWARF information output by -i is multiple
gigabytes of data.

If -Sv used instead of -S , the
number of occurrences is printed.
(see below for an example).

.TP
.BR \--search-match=<string>\ (\-S match=string)
.TP
.BR \--search-match-count=<string>\ (\-S vmatch=string)
When printing DIEs
for each tag value or attribute name that matches 'string' exactly
print the compilation unit information and its section offset.
Any CU with no match is not printed.
The 'string' is read as a URI string.
The count (Sv) form reports the count of occurrences.

.TP
.BR \--search-any=<string>\ (\-S any=string)
.TP
.BR \--search-any-count=<string>\ (\-Svany=string)
When printing DIEs
for each tag value or attribute name that contains 'string'
somewhere in the tag or attribute (case insensitive)
print the compilation unit information and its section offset.
Any CU with no match is not printed.
The 'string' is read as a URI string.
The count (Sv) form reports the count of occurrences.

.TP
.BR \--search-regex=string\ (\-S regex=string) 
.TP
.BR \--search-regex-count=string\ (\-Svregex=string) 
When printing DIEs
for each tag value or attribute name where the 'string' regular
expression matches print the compilation unit information
and its section offset.
Any CU with no match is not printed.
The 'string' is read as a URI string.
The count (Sv) form reports the count of occurrences.

.PP
The string cannot have spaces or other characters which are
meaningful to getopt(3) and the shell will strip off quotes and
other characters.
So the string is assumed to be in URI style and is translated.
In other words, to match 'a b' make the -S string 'a%20b'
Instead of escaping " quotes in the string, type %25, as in
 'a "b' should be typed 'a%20%25b'
(the ' are for exposition here, not part of the strings).
Any characters can be typed in URI style, not just characters
which are problematic to the shell or getopt.
.PP
The 
.BR \--search-any\ (\-S any) 
and
.BR \--regex-any\ (\-S regex) 
options are only usable
if regular-expression library
functions required are found at configure time.
.PP
The 
.BR \--search-print\ (\-W)
option is a modifier to the -S option, and
increases the amount of output -S prints.
An example v modifier to the -S option is shown below.
And we show the -W in context with a -S option.

.TP
.BR \--search-match-count=string
Prints information about the
DIEs that -S matches and prints the count of occurrences.

.TP
.BR \-S\ match=string1\ \-W

.TP
.BR \--search-match=string1\ \--search-print-tree
Prints the parent tree and the children tree for the
DIEs that --search-match  matches.

.TP
.BR \-S\ match=string2\ \-Wp 

.TP
.BR \--search-match=string2\ \--search-print-parent
Prints the parent tree for the DIEs that -S matches.

.TP
.BR \-S\ match=string3\ \-Wc
.TP
.BR \--search-match=string3\ \--search-print-children
Prints the children tree for the DIEs that -S matches.

.TP
.BR \--format-gcc\ (\-cg)
Restricts printing/checking to compilers whose
producer string starts with 'GNU'
and turns off -cs.

.TP
.BR \--format-snc\ (\-cs)
Restricts printing/checking to compilers whose
producer string starts with 'SN'
and turns off -cg.

.TP
.BR \--format-producer=<name>\ (\-c<name>)
Restricts printing/checking to compilers whose
producer string contains 'name' (not case sensitive).
The 'name' is read as a URI string.


.SH OTHER OPTIONS

.TP
.BR \-x\ name=<path>
.TP
.BR \--file-name=/p/a/t/h.conf\ (\-x name=/p/a/t/h.conf)
The file path given is the name of a file assumed to be
a dwarfdump.conf-like file.
The file path is read as a URI string.

.TP
.BR \-x\ abi=ppc  
.TP
.BR \--file-abi=ppc
Selects the abi (from a dwarfdump.conf file) to be used in
printing frame information (here using ppc as an example).
The abi is read as a URI string.

.TP
.BR \--format-group-number=<n>\ (\-x\ groupnumber=<n>)
For an object file with both DWARF5 split 
dwarf (.debug_info.dwo
for example)  and ordinary
DWARF sections (.debug_info for example)
in the single object file
one must use
.BR \--format-group-number=2
to print the dwo sections.
Adding 
.BR \--file-tied=<path>
naming the same object file ties
in the non-dwo sections.

.TP
.BR \-x\ tied=/t/i/depath
.TP
.BR \--file-tied=/t/i/depath
Used when opening a main object that is a .dwo or .dwp file.
For example if /path/to/myapp.dwp is the split-dwarf
object and /path/to/myapp is the executable, do
"dwarfdump --file-tied=/path/to/myapp /path/to/myapp.dwp"  . 
The tied file path names the executable which has
the .debug_addr section that may be referred to from
the main object. See Split Objects (aka Debug Fission)
in the DWARF5 standard.
This cannot be used with MacOS debug
or GNU debuglink, such files do not have
a Split Dwarf object file.

.TP
.BR \-x\ line5=s2l
.TP
.BR \--file-line5=s2l
Normally used only to test libdwarf interfaces.
There are 4 different interface function sets and to ensure
they all work this option lets us choose which
to use.  The options are 's2l' (default, Allows standard
and two-level line tables using the latest
interface functions), 'std' (Allows standard
single level line tables using the latest
interface functions), 'orig' (allows DWARF2,3,4
original line tables using an older
interface function set), 'orig2l' (allows original line tables
and some two-level line tables using an older interface set).

.TP
.B \--print-producers
.B \-P 
When checking this adds the list of compilation-unit names
seen for each producer-compiler to the printed checking results.
.TP
.B \-q
.TP
.B \--format-suppress-uri-msg
When a URI is found and translated while reading
the command line, be quiet about
the URI translation. That is, don't print the
original and translated option strings.

.TP
.B \-u cuname 
.TP
.B \--format-file=<file>
Turns on selective printing of DIEs (printing like -i).
Only the DIEs for a compilation unit that match the
name provided are printed.
If the compilation unit is ./a/b/c.c
the 'cuname' you provide should be c.c as the characters
through the final path-separating / are ignored.
If 'cuname' begins with a / then the entire name string
of a compilation unit must match 'cuname'.
The 'file' is read as a URI string.

.TP
.B \-U
.TP
.B \--format-suppress-uri
Turn off the URI interpretation of the command line
strings entirely. Must be be on the command line before
any URI strings encountered to be fully effective.
Likely something no one needs to do.

.TP
.B \-h
.TP
.B \--help
Show this man page.
.SH SPLIT DWARF
With Split Dwarf (DWARF5) the main body
of the DWARF is in a separate file, often
having the name suffix .dwp or .dwo .
.PP
For example if /path/to/myapp.dwp is the split-dwarf
object and /path/to/myapp is the executable, do
"dwarfdump --file-tied=/path/to/myapp /path/to/myapp.dwp"  .
The tied file path names the executable which has
the .debug_addr section and other sections
that may be referred to from
the .dwo/.dwp object.
.PP
See Split Object Files (sometimes called Debug Fission)
in the DWARF5 standard, section 7.3.

.SH FILES
dwarfdump

 ./dwarfdump.conf

$(HOME)/.dwarfdump.conf

$(HOME)/dwarfdump.conf

<install-prefix>/lib/dwarfdump.conf
.SH NOTES
In some cases compilers use DW_FORM_data1 (for example)
and in such cases the signedness of the value must be taken
from context. 
Rather than attempt to determine the
context, dwarfdump prints the value with both signedness
whenever there is ambiguity about the correct interpretation.
For example, 
"DW_AT_const_value           176(as signed = -80)".
For normal DWARF consumers that correctly and fully
evaluate all attributes there is no ambiguity of signedness:
the ambiguity for dwarfdump is due to dwarfdump evaluating
DIEs in a simple order and not keeping track of much context.
.SH BUGS
Support for printing certain DWARF5 location expressions is
incomplete.
Report problems to libdwarf-list -at- linuxmail -dot- org