1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495
|
Help for Cisco router simulator (dynamips-0.2.8)
================================================
Authors of this document: Fabien Devaux, Christophe Fillot, MtvE
Emulated hardware
*****************
The emulator currently supports the following platforms:
- Cisco 7200 (NPE-100 to NPE-400)
- Cisco 3600 (3620, 3640 and 3660)
- Cisco 2691
- Cisco 3725
- Cisco 3745
- Cisco 2600 (2610 to 2650XM)
- Cisco 1700 (1710 to 1760)
By default, a Cisco 7206VXR with NPE-200 (256 Mb of DRAM) is emulated.
To emulate another platform, use the "-P" command line option (for example,
"-P 3725" or "-P 3600").
For the 7200, you can change the NPE type with the "-t" option.
It is possible to select "npe-100", "npe-150", "npe-175", "npe-200",
"npe-225", "npe-300" and "npe-400". The "npe-g1" is not working.
For the 3600, a 3640 with 128 Mb is emulated by default. You can change this
with the "-t" option and by specifying "3620" or "3660".
Don't forget to set the chassis type depending on your IOS image,
a c3660 image will not run on c3640 hardware and vice-versa.
Remark: PCMCIA card emulation is not supported yet with Cisco 3600.
Command Line Options overview
*****************************
-l <log_file> : Set logging file (default is dynamips_log.txt)
-j : Disable the JIT compiler, very slow
--exec-area <size> : Set the exec area size (default: 64 Mb)
--idle-pc <pc> : Set the idle PC (default: disabled)
--timer-itv <val> : Timer IRQ interval check (default: 1000)
-i <instance> : Set instance ID
-r <ram_size> : Set the virtual RAM size
-o <rom_size> : Set the virtual ROM size
-n <nvram_size> : Set the NVRAM size
-c <conf_reg> : Set the configuration register
-m <mac_addr> : Set the MAC address of the chassis
(default: automatically generated)
-C <cfg_file> : Import an IOS configuration file into NVRAM
-X : Do not use a file to simulate RAM (faster)
-R <rom_file> : Load an alternate ROM (default: embedded)
-k <clock_div> : Set the clock divisor (default: 4)
-T <port> : Console is on TCP <port>
-U <si_desc> : Console in on serial interface <si_desc>
(default is on the terminal)
-A <port> : AUX is on TCP <port>
-B <si_desc> : AUX is on serial interface <si_desc>
(default is no AUX port)
--disk0 <size> : Set PCMCIA ATA disk0: size
--disk1 <size> : Set PCMCIA ATA disk1: size
-a <cfg_file> : Virtual ATM switch configuration file
-f <cfg_file> : Virtual Frame-Relay switch configuration file
-E <cfg_file> : Virtual Ethernet switch configuration file
-b <cfg_file> : Virtual bridge configuration file
-e : Show network device list of the host machine
Options specific to the Cisco 7200 series:
-t <npe_type> : Select NPE type (default: "npe-200")
-M <midplane> : Select Midplane ("std" or "vxr")
-p <pa_desc> : Define a Port Adapter
-s <pa_nio> : Bind a Network IO interface to a Port Adapter
Options specific to the Cisco 3600 series ("dynamips -P 3600 --help"):
-t <chassis_type> : Select Chassis type (default: "3640")
--iomem-size <val> : IO memory (in percents, default: 5)
-p <nm_desc> : Define a Network Module
-s <nm_nio> : Bind a Network IO interface to a Network Module
Options specific to the Cisco 2691 series ("dynamips -P 2691 --help"):
--iomem-size <val> : IO memory (in percents, default: 5)
-p <nm_desc> : Define a Network Module
-s <nm_nio> : Bind a Network IO interface to a Network Module
Options specific to the Cisco 3725 series ("dynamips -P 3725 --help"):
--iomem-size <val> : IO memory (in percents, default: 5)
-p <nm_desc> : Define a Network Module
-s <nm_nio> : Bind a Network IO interface to a Network Module
Options specific to the Cisco 3745 series ("dynamips -P 3745 --help"):
--iomem-size <val> : IO memory (in percents, default: 5)
-p <nm_desc> : Define a Network Module
-s <nm_nio> : Bind a Network IO interface to a Network Module
Command Line Options details
****************************
-k <clock_div> :
Specify the clock divider (integer) based on the host clock.
Alter the value to match the CISCO clock with the real time.
The command "show clock" at the IOS' CLI will help you set this value.
--idle-pc <pc> :
The "idle PC" feature allows you to run a router instance without having
a 100% CPU load. This implies that you can run a larger number of instances
per real machine.
To determine the "idle PC", start normally the emulator with your Cisco IOS
image, and a totally IOS empty configuration (although not mandatory, this
will give better results). When the image is fully booted, wait for the
"Press RETURN to get started!" message prompt, but do not press Enter key.
Wait about 5 seconds, then press "Ctrl-] + i". Some statistics will be
gathered during 10 seconds. At the end, the emulator will display a list of
possible values to pass to the "--idle-pc" option. You may have to try some
values before finding the good one. To check if the idle PC value is good,
just boot the Cisco IOS image, and check your CPU load when the console
prompt is available. If it is low, you have found a good value, keep it
preciously.
Important remarks:
==================
* An "idle PC" value is *specific* to a Cisco IOS image. You cannot
boot a different IOS image without proceeding as described above.
* Do not run the process while having the "autoconfiguration" prompt.
--exec_area <size> :
The exec area is a pool of host memory used to store pages translated by
the JIT (they contain the native code corresponding to MIPS code pages).
Cisco 7200 Port Adapter Description "<pa_desc>":
------------------------------------------------
Format: slot:pa_driver
slot: the number of the physical slot (starts from 0)
pa_driver: the name of a Port Adapter driver in:
- C7200-IO-FE (FastEthernet, slot 0 only)
- PA-FE-TX (FastEthernet, slots 1 to 6)
- PA-4E (Ethernet, 4 ports)
- PA-8E (Ethernet, 8 ports)
- PA-4T+ (Serial, 4 ports)
- PA-8T (Serial, 8 ports)
- PA-A1 (ATM)
Cisco 3600 Network Module Description "<nm_desc>":
--------------------------------------------------
Format: slot:nm_driver
slot: the number of the physical slot (starts from 0)
nm_driver: the name of a Network Module driver in:
- NM-1E (Ethernet, 1 port)
- NM-4E (Ethernet, 4 ports)
- NM-1FE-TX (FastEthernet, 1 port)
- NM-4T (Serial, 4 ports)
- NM-16ESW (Ethernet switch module, 16 ports)
- Leopard-2FE (Cisco 3660 FastEthernet in slot 0, automatically used)
Cisco 2691/3725/3745 Network Module Description "<nm_desc>":
------------------------------------------------------------
Format: slot:nm_driver
slot: the number of the physical slot (starts from 0)
nm_driver: the name of a Network Module driver in:
- NM-1FE-TX (FastEthernet, 1 port)
- NM-4T (Serial, 4 ports)
- NM-16ESW (Ethernet switch module, 16 ports)
- GT96100-FE (2 integrated ports, automatically used)
NIO binding to Port Adapter "<pa_nio>" and Network Modules "<nm_nio>":
----------------------------------------------------------------------
Format: slot:port:netio_type[:netio_parameters]
slot : the number of the physical slot (starts from 0)
port : the port in the specified slot (starts from 0)
netio_type : host interface for communication
unix:<local_sock>:<remote_sock>
Use unix sockets for local communication.
<local_sock> is created and represents the local NIC.
<remote_sock> is the file used by the other interface.
(ex. "/tmp/local:/tmp/remote")
vde:<control_sock>:<local_sock>
For use with UML (User-Mode-Linux) or VDE switches.
VDE stands for "Virtual Distributed Ethernet".
Please refer to : http://sourceforge.net/projects/vde/
tap:<tap_name>
Use a virtual ethernet device for communication.
<tap_name> is the name of the tap device (ex. "tap0")
gen_eth:<dev_name>
Use a real ethernet device for communication, using libpcap 0.9
or WinPcap. Works on Windows and Unix systems.
<dev_name> is the name of the Ethernet device (ex. "eth0")
The device list can be found using the "-e" option.
linux_eth:<dev_name>
Use a real ethernet device for communication (Linux specific).
<dev_name> is the name of the Ethernet device (ex. "eth0")
udp:<local_port>:<remote_host>:<remote_port>
Use an UDP socket for connection between remote instances.
<local_port> is the port we listen to.
<remote_host> is the host listening the port you want to connect to.
<remote_port> is the port you want to connect to.
(ex. "1000:somehost:2000" and "2000:otherhost:1000" on the other
side)
tcp_cli:<host>:<port>
Client side of a tcp connection.
<host> is the ip address of the server.
<port> is the port to connect to.
tcp_ser:<port>
Server side of a tcp connection.
<port> is the port to listen to.
null
Dummy netio (used for testing/debugging), no parameters needed.
VTTY binding to real serial port device "<si_desc>":
----------------------------------------------------
Format: <device>{:baudrate{:databits{:parity{:stopbits{:hwflow}}}}}}
device: character device name, e.g. /dev/ttyS0
baudrate: baudrate
databits: number of databits.
parity: data parity: N=none, O=odd, E=even,
stopbits: number of stop bits
hwflow: hardware flow control (0=disable, 1=enable)
Note that the device field is mandatory, however other fields are optional.
(dynamips will default to 9600, 8, N, 1, no hardware flow control)
Note that access to the escape commands (described below) through a serial
port are deliberately prevented, as the escape commands interfere with
serial encapsulation protocols.
Escape commands
***************
You can press ^] (Ctrl + ]) at any time, followed by one of these characters:
o : Show the VM object list
d : Show the device list
r : Dump MIPS CPU registers
t : Dump MIPS TLB entries
m : Dump the latest memory accesses
s : Suspend CPU emulation
u : Resume CPU emulation
q : Quit the emulator
b : Dump the instruction block tree
h : JIT hash table statistics
l : MTS64 cache statistics
c : Write IOS configuration to disk (ios_cfg.txt)
j : Non-JIT mode statistics
i : Determine an idling pointer counter
x : Experimentations (can crash the box!)
^]: Send ^]
If you press an unrecognized key, help will be shown.
Note: on Windows, it may be the "Ctrl + $" sequence.
Virtual Bridge
**************
The virtual bridge is used to emulate a shared network between emulator
instances.
Any emulator instance can act as a virtual bridge.
The configuration file (specified by the "-b" option) contains a list of
NetIO descriptors, with the following syntax:
interface_name:netio_type[:netio_parameters]
Example:
# Connection to instance "I0"
I0:udp:10000:127.0.0.1:10001
# Connection to instance "I1"
I1:udp:10002:127.0.0.1:10003
# Connection to instance "I2"
I2:udp:10004:127.0.0.1:10005
The "I0" instance would be launched with the following parameters:
dynamips ios.bin -p 1:PA-FE-TX -s 1:0:udp:10001:127.0.0.1:10000
Virtual Ethernet switch
***********************
The virtual ethernet switch is used to emulate an Ethernet network between
emulator instances. This switch supports access and trunk ports (802.1Q).
ISL will be available in a future release.
Any emulator instance can act as a virtual ethernet switch.
The configuration file (specified by the "-E" option) contains a list of
NetIO descriptors (representing interfaces) and a list of interface properties
(access/trunk port, VLAN info...)
The interface definition is similar to Port Adapters:
IF:interface_name:netio_type[:netio_parameters]
1) Configuring an Access Port
syntax: ACCESS:interface_name:vlan_id
2) Configuration a 802.1Q Trunk Port
syntax: DOT1Q:interface_name:native_vlan
The native VLAN is not tagged. On Cisco devices, by default the native VLAN
is VLAN 1.
Example of configuration file:
IF:E0:udp:10000:127.0.0.1:10001
IF:E1:udp:10002:127.0.0.1:10003
IF:E2:gen_eth:eth0
DOT1Q:E0:1
ACCESS:E1:4
DOT1Q:E2:1
Virtual ATM switch
******************
The virtual ATM switch fabric is used to emulate an ATM backbone between
emulator instances. The use of this virtual switch is not mandatory, you
can directly connect emulator instances for point-to-point ATM connections.
Please note that only basic VP/VC switching is supported, there is no
support for ILMI/QSAAL/... or other specific ATM protocols.
Any emulator instance can act as a virtual ATM switch.
Example of configuration file (specified by the "-a" option):
# Virtual Interface List
IF:A0:udp:10001:127.0.0.1:10000
IF:A1:udp:10002:127.0.0.1:10003
IF:A2:udp:10004:127.0.0.1:10005
# VP connection between I0 and I1
VP:A0:10:A1:20
VP:A1:20:A0:10
# VP connection between I0 and I2
VP:A0:11:A2:30
VP:A2:30:A0:11
# VC connection between I1 and I2
VC:A1:5:2:A2:7:3
VC:A2:7:3:A1:5:2
In this example, we have 3 virtual interfaces, A0, A1 and A2. The syntax
for interface definition is similar to Port Adapters:
IF:interface_name:netio_type[:netio_parameters]
You can do VP switching or VC switching:
1) VP switching
syntax: VP:input_if:input_vpi:output_if:output_vpi
2) VC switching
syntax: VC:input_if:input_vpi:input_vci:output_if:output_vpi:output_vci
Testing the Virtual ATM switch with one dynamips instance
*********************************************************
(Contribution of Mtv Europe)
Virtual ATM switch configuration file ("atm.cfg"):
IF:A0:udp:10003:127.0.0.1:10001
IF:A1:udp:10004:127.0.0.1:10002
# a0/vpi=1/vci=100 connects to a1/vpi=2/vci=200
VC:A0:1:100:A1:2:200
VC:A1:2:200:A0:1:100
Invoking dynamips:
./dynamips -p 1:PA-A1 -s 1:0:udp:10001:127.0.0.1:10003 \
-p 2:PA-A1 -s 2:0:udp:10002:127.0.0.1:10004 \
-a atm.cfg IOS.BIN
(note input ports of IOS interfaces are output ports of ATM switch
interfaces, and vice versa).
IOS configuration:
ip cef
ip vrf test
rd 1:1
route-target both 1:1
int a1/0
no shut
int a1/0.2 p
ip addr 1.1.1.1 255.255.255.0
pvc 1/100
interface a2/0
no shut
interface a2/0.2 p
ip vrf forwarding test
ip addr 1.1.1.2 255.255.255.0
pvc 2/200
!
# ping 1.1.1.2
!!!!!
Virtual Frame-Relay switch
**************************
The virtual Frame-Relay switch fabric is used to emulate a Frame-Relay
backbone between emulator instances. The use of this virtual switch is not
mandatory, you can directly connect emulator instances with appropriate IOS
configuration.
Any emulator instance can act as a virtual Frame-Relay switch.
There is only a basic implementation of the LMI protocol (ANSI Annex D), which
is probably not conforming but works with Cisco IOS. Fortunately, Cisco IOS
is able to detect automatically the LMI protocol.
Example of configuration file (specified by the "-f" option):
# Virtual Interface List
IF:S0:udp:10001:127.0.0.1:10000
IF:S1:udp:10002:127.0.0.1:10003
# DLCI switching between S0 and S1
VC:S0:200:S1:100
VC:S1:100:S0:200
In this example, we have 2 virtual interfaces, S0 and S1. The syntax
for interface definition is similar to Port Adapters:
IF:interface_name:netio_type[:netio_parameters]
DLCI switching syntax:
VC:input_if:input_dlci:output_if:output_dlci
In the example above, the switch is configured to switch packets
received on interface S0 with DLCI 200 to interface S1 with DLCI 100,
and vice-versa.
== EOF ==
|